a server hangs up diretcly after a message.
- Some output was suppressed while tracing, fixed
- Make ready to compile both with Ubuntu 32 and 64 or /usr/local
based ON in general. Just in psi/makefile_linux the top include has
to be adapted
- Removed epics drivers from SICS. Still in source to be reenabled when
needed
- Added FindMotor
- Added sput, sappend and slab to nxscript using the new sicsget module
- Fix to sget to fix the "mot softzero" problem
SKIPPED:
psi/make_gen
psi/psi.c
psi/sinqhttpopt.c
psi/spss7.c
- Added error fields to hwardware objects: motor, counter, histmem
- Optimised sinqhttpopt
- Added haddcheck which adds checks to hipadaba nodes. The current implementation
only checks for selctions agaisnt the values property. Expand when more checks are
required.
SKIPPED:
psi/polterwrite.c
psi/sinqhttpopt.c
psi/tasinit.c
- Fixed some issues with error returns not being properly handled in devexec
- Fixed a bug in motorlist which caused limit checks to fail
- Fixed an issue with the TDCHM not properly updating the counter
values on finish
- Readded getHipadabaPar in ChainCallback as this caused a problem in ei
- Made tasdrive ignore sgu, sgl when out of plane not allowed
SKIPPED:
psi/eigermono.c
psi/sinqhttp.c
psi/tdchm.c
- Extended tasker to support task groups
- Added task functions for motors and counters
- Modifed devexec to use the new task functions
- Modified TAS to treat the monochromator separatly
- Coded a EIGER monochromator module to reflect even more new
requirements
- Added EPICS counters and motors
- Modified multicounter to be better performing
SKIPPED:
psi/eigermono.c
psi/make_gen
psi/makefile_linux
psi/psi.c
psi/sinqhttp.c
the capture command in that it not put resluts into the Tcl interpreter.
This broke scriptcontext scripts in complicated situations.
- Resolved some issues with the TAS calculation and negative scattering sense.
- Fixed a bug which did not reset the state to idle after checking
reachability in confvirtualmot.c
SKIPPED:
psi/autowin.c
psi/eigera2.c
psi/jvlprot.c
psi/makefile_linux
psi/sinqhttpopt.c
psi/tasscan.c
- Extended confvirtmot to have a checkscript
- Made sure that targets get updated when calling tasdrive
- Fixed some output codes in tasdrive.c
- Made tdchm invoke counters event message for Melone
- Fixed the ConID inefficiency by caching the host name in asynnet.c
- Added a traceActive function to trace
SKIPPED:
psi/tdchm.c
- Fixed ei interrupt bug in tasdrive.c
- Made eiger A2 driving work
- Added force start facility to devexec for POLDI HV
SKIPPED:
psi/eigera2.c
psi/polterwrite.c
- Fixes to make the second generation velocity selector driver work
- Modified obpar.c to allow parameter changes while running. This makes
it possible to collect data at TRICS while cooling down.
- Implemented the desired run/drive behaviour: drive waits for what it started
run starts, and success waits for everything to finish. This required
changes to a lot of files.
- Fixed a bug in remob which supressed required messages
- Added new ACT protocol
- Extended sicshdbadapter to cover counters and status to put the status
into Hipadaba
- Fixes to napi5.c
- Exe now supports hdbrun which allows to write output for a buffer into
hdb node.
- Fixes to make RITA work
- tasub extended to calculate UB from cell alone, support for elastic mode
- New MultiCounter as abstraction for counting on HM's
- regression test driver for counters
- Changes to Hipadaba
- Added project to histogram memory code
- Started regression testing code
- Added hill climbing as optimization method to optimise
- New chopper driver for MARS Juelich chopper system
- New docbook based SANS manual
SKIPPED:
psi/amorcomp.c
psi/amordrive.h
psi/amorset.c
psi/amorset.h
psi/amorset.tex
psi/amorset.w
psi/julcho.c
psi/libpsi.a
psi/make_gen
psi/psi.c
- Fixed new AMOR settings module
- Initial implementation of the new SICS hierarchical parameter database
SKIPPED:
psi/amorset.c
psi/libpsi.a
psi/sps.c
- hkl now searches psi in .5 steps
- first point of fastscan is driven normally
SKIPPED:
psi/amor2t.c
psi/amor2t.h
psi/amor2t.i
psi/amor2t.tex
psi/amor2t.w
psi/dornier2.c
psi/el734hp.c
psi/nxamor.c
psi/slsmagnet.c
psi/sps.c
a connection during an active run.
- Added an additional output mode for the connection in order to
support the batch run editor.
- Made clientput send everything with eWarning mode in order to support
the batch run editor.
- Added a better NetReadTillTerm
- Fixed a problem in synchronize.c
- Fixed an issue with reading empty line on normal connection sockets.
- Added a psi scan mode to mesure.c for TRICS
- Made motor print warnings when trying to reposition.
- Fixed abug in hkl.c which cause wrong signs.
SKIPPED:
psi/el734driv.c
psi/el734hp.c
psi/el737driv.c
psi/el737hpdriv.c
psi/nextrics.c
psi/nxamor.c
psi/psi.c
psi/slsmagnet.c
psi/swmotor2.c
psi/tasscan.c
psi/tasutil.c
- Added fulltransact which sends a TRANSACTIONSTART meesage in addition to
TRANSASCTIONFINISHED
- Added parameter to motor which allows to ignore positioning faults
- ADDED POLAN support to tasscan
SKIPPED:
psi/dornier2.c
psi/el734hp.c
psi/tasdrive.c
psi/tasscan.c
psi/tdchm.c
- Fixes to the new counter and motor drivers
- Updated Linux makefiles to linux_def
SKIPPED:
psi/dornier2.c
psi/el734hp.c
psi/el737hpdriv.c
psi/makefile_linux
psi/psi.c
psi/hardsup/makefile_linux
psi/tecs/makefile_linux
