binaries in

rxr chrono

.clang-format

@@ -3,4 +3,5 @@ IndentWidth: 4
 
 UseTab: Never
 ColumnLimit: 80
-AlignConsecutiveAssignments: false 
+AlignConsecutiveAssignments: false 
+AlignConsecutiveMacros: true

.clang-tidy

@@ -17,7 +17,8 @@ Checks:          '*,
                     -google-runtime-references, 
                     -google-readability-todo, 
                     -google-readability-braces-around-statements,
-                    -modernize-use-trailing-return-type'
+                    -modernize-use-trailing-return-type,
+                    -readability-isolate-declaration'
 
 HeaderFilterRegex: \.h
 AnalyzeTemporaryDtors: false

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,60 @@
+---
+name: Bug Report
+about: Create a report to help us improve 
+title: New Bug Report
+labels: action - Bug, priority - Unclassified, status - Pending
+template: bug_report.md
+---
+
+<!--  Check an option by - [x], Uncheck an option by - [ ] -->
+<!-- Please preview to see your option has been selected -->
+
+<!-- Please fill out everything with an *, as this report will be discarded otherwise -->
+
+##### *Distribution: 
+- [x] RHEL7
+- [ ] RHEL6
+- [ ] Fedora
+- [ ] Other
+
+##### *Detector type: 
+- [x] Not applicable
+- [ ] Eiger
+- [ ] Jungfrau
+- [ ] Mythen3
+- [ ] Gotthard2
+- [ ] Gotthard
+- [ ] Moench
+- [ ] ChipTestBoard
+
+##### *Software Package Version: 
+- [ ] developer
+- [ ] 4.2.0
+- [ ] 4.1.1
+<!-- If others, please describe -->
+
+##### Priority:
+- [ ] Super Low
+- [ ] Low
+- [ ] Medium
+- [ ] High
+- [ ] Super High
+
+##### *Describe the bug
+<!--  A clear and concise description of what the bug is -->
+
+##### Expected behavior
+<!--  A clear and concise description of what you expected to happen. -->
+
+##### To Reproduce
+<!--  Steps to reproduce the behavior: -->
+<!--  1. Go to '...' -->
+<!--  2. Click on '....' -->
+<!--  3. Scroll down to '....' -->
+<!--  4. See error -->
+
+##### Screenshots
+<!--  If applicable, add screenshots to help explain your problem. -->
+
+##### Additional context
+<!--  Add any other context about the problem here. -->

.github/ISSUE_TEMPLATE/change_request.md

@@ -0,0 +1,44 @@
+---
+name: Change Request
+about: Suggest a change to an existing feature
+title: New Change Request
+labels: action - Change, priority - Unclassified, status - Pending
+template: change_request.md
+---
+
+<!--  Check an option by - [x], Uncheck an option by - [ ] -->
+<!-- Please preview to see your option has been selected -->
+
+<!-- Please fill out everything with an *, as this report will be discarded otherwise -->
+
+##### *Detector type: 
+- [x] Not applicable
+- [ ] Eiger
+- [ ] Jungfrau
+- [ ] Mythen3
+- [ ] Gotthard2
+- [ ] Gotthard
+- [ ] Moench
+- [ ] ChipTestBoard
+
+##### *Software Package Version: 
+- [ ] developer
+- [ ] 4.2.0
+- [ ] 4.1.1
+<!-- If others, please describe -->
+
+##### Priority:
+- [ ] Super Low
+- [ ] Low
+- [ ] Medium
+- [ ] High
+- [ ] Super High
+
+##### *State the change request:
+<!--  A clear and concise description of what the change is to an existing feature -->
+
+##### Is your change request related to a problem. Please describe:
+<!-- A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] -->
+
+##### Additional context:
+<!--  Add any other context about the feature here -->

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1 @@
+blank_issues_enabled: false

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,50 @@
+---
+name: Feature Request
+about: Suggest a feature
+title: New Feature Request
+labels: action - Enhancement, priority - Unclassified, status - Pending
+template: feature_request.md
+---
+
+<!--  Check an option by - [x], Uncheck an option by - [ ] -->
+<!-- Please preview to see your option has been selected -->
+
+<!-- Please fill out everything with an *, as this report will be discarded otherwise -->
+
+##### *Detector type: 
+- [x] Not applicable
+- [ ] Eiger
+- [ ] Jungfrau
+- [ ] Mythen3
+- [ ] Gotthard2
+- [ ] Gotthard
+- [ ] Moench
+- [ ] ChipTestBoard
+
+##### *Software Package Version: 
+- [ ] developer
+- [ ] 4.2.0
+- [ ] 4.1.1
+<!-- If others, please describe -->
+
+##### Priority:
+- [ ] Super Low
+- [ ] Low
+- [ ] Medium
+- [ ] High
+- [ ] Super High
+
+##### *State the feature:
+<!--  A clear and concise description of what the feature is -->
+
+##### Is your feature request related to a problem. Please describe:
+<!-- A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] -->
+
+##### Describe the solution you'd like:
+<!-- A clear and concise description of what you want to happen -->
+
+##### Describe alternatives you've considered:
+<!-- A clear and concise description of any alternative solutions or features you've considered -->
+
+##### Additional context:
+<!--  Add any other context about the feature here -->

.gitignore

@@ -7,6 +7,7 @@ bin/
 *.out
 *.toc
 *.o
+*.so
 .*
 build
 RELEASE.txt

.travis.yml

@@ -4,39 +4,25 @@ language: cpp
 
 os: linux
 
-env: 
-  matrix: 
-     - CONDA_PY=3.6
-     - CONDA_PY=3.7
-     - CONDA_PY=3.8
-
-
-dist: trusty
+dist: bionic
 
 install:
   - sudo apt-get update
   - ldd --version
   - wget https://repo.continuum.io/miniconda/Miniconda3-latest-Linux-x86_64.sh -O miniconda.sh;
   - bash miniconda.sh -b -p $HOME/miniconda
-  - export PATH="$HOME/miniconda/bin:$PATH"
+  - source "$HOME/miniconda/etc/profile.d/conda.sh"
   - rm -f miniconda.sh
   - hash -r
   - conda config --set always_yes yes --set changeps1 no
   - conda config --add channels conda-forge
   - conda config --add channels slsdetectorgroup
-  - conda update conda
-  - conda update --all
-  - conda install conda-build=3.17 
-  - conda install anaconda-client
-  - conda install conda-verify
-
-  # Useful for debugging any issues with conda
+  - conda update -q conda
   - conda info -a
 
-
-  # Replace dep1 dep2 ... with your dependencies
-  - conda create -q -n test-environment python=$CONDA_PY
-  - source activate test-environment
+  # Useful for debugging any issues with conda
+  - conda create -q -n testenv conda-build anaconda-client conda-verify
+  - conda activate testenv
   - conda-build .
 
 script:
@@ -45,7 +31,8 @@ script:
 
 deploy:
   provider: script
-  script: find $HOME/miniconda/conda-bld/${TRAVIS_OS_NAME}-64 -name "*.tar.bz2" -exec anaconda -t $CONDA_TOKEN upload --force {} \;
+  script: find $HOME/miniconda/envs/testenv/conda-bld/${TRAVIS_OS_NAME}-64 -name "*.tar.bz2" -exec anaconda -t $CONDA_TOKEN upload --force {} \;
   on:
     branch: developer
+    tags: true
 

CMakeLists.txt

@@ -1,8 +1,8 @@
-cmake_minimum_required(VERSION 3.11)
+cmake_minimum_required(VERSION 3.12)
 project(slsDetectorPackage)
 set(PROJECT_VERSION 5.0.0)
 include(CheckIPOSupported)
-
+set(CMAKE_CXX_FLAGS_RELEASE "-O3 -DNDEBUG")
 
 cmake_policy(SET CMP0074 NEW)
 include(cmake/project_version.cmake)
@@ -44,6 +44,36 @@ option(SLS_USE_PYTHON "Python bindings" OFF)
 option(SLS_USE_CTBGUI "ctb GUI" OFF)
 option(SLS_BUILD_DOCS "docs" OFF)
 option(SLS_BUILD_EXAMPLES "examples" OFF)
+option(SLS_TUNE_LOCAL "tune to local machine" OFF)
+option(SLS_DEVEL_HEADERS "install headers for devel" OFF)
+option(SLS_USE_MOENCH "compile zmq and post processing for Moench" OFF)
+
+# set(ClangFormat_BIN_NAME clang-format)
+set(ClangFormat_EXCLUDE_PATTERNS  "build/" 
+                                    "libs/" 
+                                    "slsDetectorCalibration/" 
+                                    "ctbGui/" 
+                                    "manual/"
+                                    "python/"
+                                    "sample/"
+                                    ${CMAKE_BINARY_DIR})
+find_package(ClangFormat)
+
+#Enable LTO if available
+check_ipo_supported(RESULT SLS_LTO_AVAILABLE)
+
+
+# Use ld.gold if it is available and isn't disabled explicitly
+option(SLS_USE_LD_GOLD "Use GNU gold linker" ON)
+if (SLS_USE_LD_GOLD)
+    execute_process(COMMAND ${CMAKE_C_COMPILER} -fuse-ld=gold -Wl,--version ERROR_QUIET OUTPUT_VARIABLE LD_VERSION)
+    if ("${LD_VERSION}" MATCHES "GNU gold")
+        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fuse-ld=gold")
+        set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fuse-ld=gold")
+    else ()
+        message(WARNING "GNU gold linker isn't available, using the default system linker.")
+    endif ()
+endif ()
 set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
 
 if (NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)
@@ -67,6 +97,7 @@ target_compile_options(slsProjectWarnings INTERFACE
                                             -Wformat=2
                                             -Wredundant-decls
                                             # -Wconversion
+                                            -Wvla
                                             -Wdouble-promotion
                                             -Werror=return-type
 
@@ -111,6 +142,11 @@ if(SLS_USE_SANITIZER)
     # target_link_libraries(slsProjectOptions INTERFACE -fsanitize=thread)
 endif()
 
+if(SLS_TUNE_LOCAL)
+    target_compile_options(slsProjectOptions INTERFACE -mtune=native -march=native)
+endif()
+
+
 #rapidjson
 add_library(rapidjson INTERFACE)
 target_include_directories(rapidjson INTERFACE
@@ -126,7 +162,7 @@ install(TARGETS slsProjectOptions slsProjectWarnings rapidjson
 )
 
 set(CMAKE_POSITION_INDEPENDENT_CODE ON)
-set(CMAKE_INSTALL_RPATH "$ORIGIN")
+set(CMAKE_INSTALL_RPATH $ORIGIN)
 # set(CMAKE_BUILD_WITH_INSTALL_RPATH TRUE)
 set(CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
 
@@ -159,7 +195,7 @@ endif (SLS_USE_RECEIVER)
 
 if (SLS_USE_GUI)   
     find_package(Qt4 REQUIRED)
-    find_package(Qwt 6 REQUIRED)
+    find_package(Qwt 6.1 REQUIRED)
     if (QT4_FOUND AND QWT_FOUND)
         add_subdirectory(slsDetectorGui)
     endif()
@@ -174,6 +210,7 @@ if (SLS_USE_INTEGRATION_TESTS)
 endif (SLS_USE_INTEGRATION_TESTS)
 
 if (SLS_USE_PYTHON)
+    set(PYBIND11_CPP_STANDARD -std=c++11)
     add_subdirectory(libs/pybind11)
     add_subdirectory(python)
 endif(SLS_USE_PYTHON)
@@ -195,10 +232,13 @@ if(SLS_BUILD_DOCS)
 endif(SLS_BUILD_DOCS)
 
 
+if(SLS_USE_MOENCH)
+    add_subdirectory(slsDetectorCalibration/moenchExecutables)
+endif(SLS_USE_MOENCH)
 
 if(SLS_MASTER_PROJECT)
     # Set install dir CMake packages
-    set(CMAKE_INSTALL_DIR ${CMAKE_INSTALL_DATADIR}/cmake/sls)
+    set(CMAKE_INSTALL_DIR "share/cmake/${PROJECT_NAME}")
     # Set the list of exported targets
     set(PROJECT_LIBRARIES slsSupportLib slsDetectorShared slsReceiverShared)
     # Generate and install package config file and version

README.md

@@ -2,90 +2,67 @@
 Detailed documentation can be found on the [official site.](https://www.psi.ch/detectors/users-support)
 
 ### Binaries
-Documentation to obtain the binaries via the conda package is available for [lib](https://github.com/slsdetectorgroup/sls_detector_lib) and [gui](https://github.com/slsdetectorgroup/sls_detector_gui)
+Binaries for the slsDetectorPackage are available through conda. 
+```
+#Add conda channels
+conda config --add channels conda-forge
+conda config --add channels slsdetectorgroup
+
+conda install slsdetlib   #only shared lib and command line
+conda install slsdet      #python bindings (includes slsdetlib)
+conda install slsdetgui   #gui (includes qt4)
+
+#Install specific version
+conda install slsdet=2020.03.02.dev0 #developer version from 3 March 2020
+
+```
 
 ### Source code
-One can also obtain the source code from this repository and compile while realizing the setup dependencies as required.
+One can also obtain the source code from this repository and compile.
 ```
 git clone https://github.com/slsdetectorgroup/slsDetectorPackage.git
 
 ```
-#### Setup dependencies 
-* Gui Client <br>
-Requirements: Qt 4.8 and Qwt 6.0
-```
-    export QTDIR=/usr/local/Trolltech/
-    export QWTDIR=/usr/local/qwt-6.0.1/
-```
-If either of them does not exist, the GUI client will not be built.
+#### Dependencies 
+* Lib: c++11 compiler (gcc=>4.8), ZeroMQ 4
+* Gui: Qt 4.8 and Qwt 6.0
+* Calibration wizards and ctbGUI: ROOT
+* Optional: HDF5
 
-* Advanced user Calibration wizards<br>
-Requirements: ROOT
-```
-    export ROOTSYS=/usr/local/root-5.34
-```
 
 #### Compilation 
 
-Compiling can be done in two ways.
+Compiling can be done in two ways. Either with the convenience script
+cmk.sh or directly with cmake for more control.
 
 **1. Compile using script cmk.sh**<br>
 
 After compiling, the libraries and executables will be found in `slsDetectorPackage/build/bin` directory<br>
 
-Usage: [-c] [-b] [-h] [-d HDF5 directory] [-j]<br>
- * -[no option]: only make<br>
- * -c: Clean<br>
- * -b: Builds/Rebuilds CMake files normal mode<br>
- * -h: Builds/Rebuilds Cmake files with HDF5 package<br>
- * -d: HDF5 Custom Directory<br>
- * -t: Build/Rebuilds only text client<br>
- * -r: Build/Rebuilds only receiver<br>
- * -g: Build/Rebuilds only gui<br>
- * -j: Number of threads to compile through<br>
- * -e: Debug mode
- 
-Basic Option:
-./cmk.sh -b
- 
-For only make:
-./cmk.sh
-
-For make clean;make:
-./cmk.sh -c
-
-For using hdf5 without custom dir /blabla:
-./cmk.sh -h -d /blabla
-
-For rebuilding cmake without hdf5 
-./cmk.sh -b
-
-For using multiple cores to compile faster:
-./cmk.sh -j9<br>
-
-
-For rebuilding only certain sections<br>
-./cmk.sh -tg #only text client and gui<br>
-./cmk.sh -r #only receiver<br>
-
+Usage: [-c] [-b] [-p] [e] [t] [r] [g] [s] [u] [i] [-h] [-d <HDF5 directory>] [-j] <Number of threads>
+ -[no option]: only make
+ -c: Clean
+ -b: Builds/Rebuilds CMake files normal mode
+ -p: Builds/Rebuilds Python API
+ -h: Builds/Rebuilds Cmake files with HDF5 package
+ -d: HDF5 Custom Directory
+ -t: Build/Rebuilds only text client
+ -r: Build/Rebuilds only receiver
+ -g: Build/Rebuilds only gui
+ -s: Simulator
+ -u: Chip Test Gui
+ -j: Number of threads to compile through
+ -e: Debug mode
+ -i: Builds tests
+  
+eg. Rebuild when you switch to a new build and compile in parallel:
+./cmk.sh -bj5
 
 **2. Compile without script**<br>
-Use cmake to create out-of-source builds, by creating a build folder parallel to source directory.
+Use cmake to create out-of-source builds, by creating a build folder parallel to source directory. This would create a debug build with address sanitizers.
 ```
-    $ cd ..
-    $ mkdir slsDetectorPackage-build
-    $ cd slsDetectorPackage-build
-    $ cmake ../slsDetectorPackage  -DCMAKE_BUILD_TYPE=Debug -DSLS_USE_HDF5=OFF 
-    $ make
-```
-
-Use the following as an example to compile statically and using specific hdf5 folder
-```
-    $ HDF5_ROOT=/opt/hdf5v1.10.0 cmake ../slsDetectorPackage -DCMAKE_BUILD_TYPE=Debug -DSLS_USE_HDF5=ON
- ```  
-After compiling, the libraries and executables will be found at `bin` directory
-```
-    $ ls bin/
-    gui_client  libSlsDetector.a  libSlsDetector.so  libSlsReceiver.a  libSlsReceiver.so
-    sls_detector_acquire  sls_detector_get  slsDetectorGui  sls_detector_help  sls_detector_put  slsReceiver slsMultiReceiver
+    $ mkdir build
+    $ cd build
+    $ cmake ../slsDetectorPackage  -DCMAKE_BUILD_TYPE=Debug -DSLS_USE_SANITIZER=ON
+    $ make -j12 #or whatever number of threads wanted
 ```

RELEASE.txt

@@ -0,0 +1,2 @@
+Draft
+- dr 4, 8, 16 in eiger -> speed 0, 32 stays same (speed 1)

cmake/FindClangFormat.cmake

@@ -0,0 +1,39 @@
+# Find Clang format
+if(NOT ClangFormat_BIN_NAME)
+	set(ClangFormat_BIN_NAME clang-format)
+endif()
+
+# if custom path check there first
+if(ClangFormat_ROOT_DIR)
+    find_program(ClangFormat_BIN 
+        NAMES
+        ${ClangFormat_BIN_NAME}
+        PATHS
+        "${ClangFormat_ROOT_DIR}"
+        NO_DEFAULT_PATH)
+endif()
+
+find_program(ClangFormat_BIN NAMES ${ClangFormat_BIN_NAME})
+
+include(FindPackageHandleStandardArgs)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(
+    ClangFormat
+    DEFAULT_MSG 
+    ClangFormat_BIN)
+
+mark_as_advanced(
+    ClangFormat_BIN)
+
+if(ClangFormat_FOUND)
+    exec_program(${ClangFormat_BIN} ${CMAKE_CURRENT_SOURCE_DIR} ARGS --version OUTPUT_VARIABLE CLANG_VERSION_TEXT)
+    string(REGEX MATCH "([0-9]+)\\.[0-9]+\\.[0-9]+" CLANG_VERSION ${CLANG_VERSION_TEXT})
+    if((${CLANG_VERSION} GREATER "9") OR (${CLANG_VERSION} EQUAL "9"))
+        # A CMake script to find all source files and setup clang-format targets for them
+        message(STATUS "found clang-format \"${CLANG_VERSION}\" adding formatting targets")
+        include(clang-format)
+    else()
+        message(STATUS "clang-format version \"${CLANG_VERSION}\" found but need at least 9. Not setting up format targets")
+    endif()
+else()
+    message(STATUS "clang-format not found. Not setting up format targets")
+endif()

cmake/clang-format.cmake

@@ -0,0 +1,47 @@
+# A CMake script to find all source files and setup clang-format targets for them
+
+# Find all source files
+set(ClangFormat_CXX_FILE_EXTENSIONS ${ClangFormat_CXX_FILE_EXTENSIONS} *.cpp *.h *.cxx *.hxx *.hpp *.cc *.ipp *.c)
+file(GLOB_RECURSE ALL_SOURCE_FILES ${ClangFormat_CXX_FILE_EXTENSIONS})
+
+# Don't include some common build folders
+set(ClangFormat_EXCLUDE_PATTERNS ${ClangFormat_EXCLUDE_PATTERNS} "/CMakeFiles/" "cmake")
+
+# get all project files file
+foreach (SOURCE_FILE ${ALL_SOURCE_FILES}) 
+    foreach (EXCLUDE_PATTERN ${ClangFormat_EXCLUDE_PATTERNS})
+        string(FIND ${SOURCE_FILE} ${EXCLUDE_PATTERN} EXCLUDE_FOUND) 
+        if (NOT ${EXCLUDE_FOUND} EQUAL -1) 
+            list(REMOVE_ITEM ALL_SOURCE_FILES ${SOURCE_FILE})
+        endif () 
+    endforeach ()
+endforeach ()
+
+#target for formatting soruce files
+add_custom_target(format
+    COMMENT "Running clang-format to change files"
+    COMMAND ${ClangFormat_BIN}
+    -style=file
+    -i
+    ${ALL_SOURCE_FILES}
+)
+
+
+#target to check format on source files 
+add_custom_target(format-check
+    COMMENT "Checking clang-format changes"
+    # Use ! to negate the result for correct output
+    COMMAND !
+    ${ClangFormat_BIN}
+    -style=file
+    -output-replacements-xml
+    ${ALL_SOURCE_FILES}
+    | grep -q "replacement offset" 
+)
+
+# debug to check which file will be formatted
+add_custom_target(
+    listformatfiles
+    COMMAND
+    echo ${ALL_SOURCE_FILES}
+)

cmake/package_config.cmake

@@ -15,17 +15,20 @@ configure_package_config_file(
 write_basic_package_version_file(
   "${PROJECT_BINARY_DIR}/${PROJECT_NAME_LOWER}-config-version.cmake"
   VERSION ${PROJECT_VERSION}
-  COMPATIBILITY SameMajorVersion)
+  COMPATIBILITY SameMajorVersion
+)
 
 install(FILES
   "${PROJECT_BINARY_DIR}/${PROJECT_NAME_LOWER}-config.cmake"
   "${PROJECT_BINARY_DIR}/${PROJECT_NAME_LOWER}-config-version.cmake"
   COMPONENT devel
-  DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/${PROJECT_NAME_LOWER})
+  DESTINATION ${CMAKE_INSTALL_DIR}
+)
 
 if (PROJECT_LIBRARIES OR PROJECT_STATIC_LIBRARIES)
   install(
     EXPORT "${TARGETS_EXPORT_NAME}"
     FILE ${PROJECT_NAME_LOWER}-targets.cmake
-    DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/${PROJECT_NAME_LOWER})
+    DESTINATION ${CMAKE_INSTALL_DIR}
+    )
 endif ()

cmk.sh

@@ -11,6 +11,8 @@ PYTHON=0
 TESTS=0
 SIMULATOR=0
 CTBGUI=0
+MANUALS=0
+MOENCHZMQ=0
 
 
 CLEAN=0
@@ -19,7 +21,7 @@ CMAKE_PRE=""
 CMAKE_POST=""
 
 usage() { echo -e "
-Usage: $0 [-c] [-b] [-p] [e] [t] [r] [g] [s] [u] [i] [-h] [-d <HDF5 directory>] [-j] <Number of threads>
+Usage: $0 [-c] [-b] [-p] [e] [t] [r] [g] [s] [u] [i] [m] [-h] [z] [-d <HDF5 directory>] [-j] <Number of threads>
  -[no option]: only make
  -c: Clean
  -b: Builds/Rebuilds CMake files normal mode
@@ -34,6 +36,8 @@ Usage: $0 [-c] [-b] [-p] [e] [t] [r] [g] [s] [u] [i] [-h] [-d <HDF5 directory>]
  -j: Number of threads to compile through
  -e: Debug mode
  -i: Builds tests
+ -m: Manuals
+ -z: Moench zmq processor
 
 Rebuild when you switch to a new build and compile in parallel:
 ./cmk.sh -bj5
@@ -69,7 +73,7 @@ For rebuilding only certain sections
  
  " ; exit 1; }
 
-while getopts ":bpchd:j:trgeisu" opt ; do
+while getopts ":bpchd:j:trgeisumz" opt ; do
 	case $opt in
 	b) 
 		echo "Building of CMake files Required"
@@ -124,6 +128,14 @@ while getopts ":bpchd:j:trgeisu" opt ; do
 		echo "Compiling Options: Simulator" 
 		SIMULATOR=1
 		;; 
+	m)	
+		echo "Compiling Manuals"
+		MANUALS=1
+		;;
+	z)	
+		echo "Compiling Moench Zmq Processor"
+		MOENCHZMQ=1
+		;;
 	u)
 		echo "Compiling Options: Chip Test Gui"
 		CTBGUI=1
@@ -187,8 +199,8 @@ fi
 
 #Debug
 if [ $DEBUG -eq 1 ]; then
-	CMAKE_POST+=" -DCMAKE_BUILD_TYPE=Debug "
-# CMAKE_POST+=" -DCMAKE_BUILD_TYPE=Debug -DSLS_USE_SANITIZER=ON "
+#	CMAKE_POST+=" -DCMAKE_BUILD_TYPE=Debug "
+	CMAKE_POST+=" -DCMAKE_BUILD_TYPE=Debug -DSLS_USE_SANITIZER=ON "
 	echo "Debug Option enabled"
 fi 
 
@@ -198,6 +210,18 @@ if [ $SIMULATOR -eq 1 ]; then
 	echo "Simulator Option enabled"
 fi 
 
+#Manuals
+if [ $MANUALS -eq 1 ]; then
+	CMAKE_POST+=" -DSLS_BUILD_DOCS=ON "
+	echo "Manuals Option enabled"
+fi 
+
+#Moench zmq processor
+if [ $MOENCHZMQ -eq 1 ]; then
+	CMAKE_POST+=" -DSLS_USE_MOENCH=ON "
+	echo "Moench Zmq Processor Option enabled"
+fi 
+
 #Chip Test Gui
 if [ $CTBGUI -eq 1 ]; then
 	CMAKE_POST+=" -DSLS_USE_CTBGUI=ON "
@@ -247,8 +271,18 @@ if [ $COMPILERTHREADS -gt 0 ]; then
 	BUILDCOMMAND="make -j$COMPILERTHREADS"
 	echo $BUILDCOMMAND
 	eval $BUILDCOMMAND
+	if [ $MANUALS -eq 1 ]; then
+		BUILDCOMMAND="make docs -j$COMPILERTHREADS"
+		echo $BUILDCOMMAND
+		eval $BUILDCOMMAND
+	fi 
 else
+	echo "make"
 	make
+	if [ $MANUALS -eq 1 ]; then
+		echo "make docs"
+		make docs
+	fi 
 fi
 
 

conda-recepie/build.sh

@@ -1,3 +1,4 @@
+
 mkdir build
 mkdir install
 cd build
@@ -6,7 +7,7 @@ cmake .. \
       -DCMAKE_INSTALL_PREFIX=install \
       -DSLS_USE_TEXTCLIENT=ON \
       -DSLS_USE_RECEIVER=ON \
-      -DSLS_USE_GUI=OFF \
+      -DSLS_USE_GUI=ON \
       -DSLS_USE_TESTS=ON \
       -DSLS_USE_PYTHON=OFF \
       -DCMAKE_BUILD_TYPE=Release \

conda-recepie/build_pylib.sh

@@ -1,14 +1,4 @@
 
-# mkdir $PREFIX/lib
-# mkdir $PREFIX/include
-
-
-# #Shared and static libraries
-# cp build/bin/_sls_detector* $PREFIX/lib/.
-
-
-# #Binaries
-# cp -r build/bin/sls_detector $PREFIX/lib/.
-
+echo "|<-------- starting python build"
 cd python
-${PYTHON} setup.py install
+${PYTHON} setup.py install

conda-recepie/conda_build_config.yaml

@@ -0,0 +1,7 @@
+python:
+    - 3.6
+    - 3.7
+    - 3.8
+    
+numpy: 
+    - 1.17

conda-recepie/copy_ctbgui.sh

@@ -0,0 +1,9 @@
+mkdir $PREFIX/lib
+mkdir $PREFIX/bin
+mkdir $PREFIX/include
+
+
+
+cp build/bin/ctbGui $PREFIX/bin/.
+cp build/bin/libctbRootLib.so $PREFIX/lib/.
+

conda-recepie/copy_gui.sh

@@ -1,15 +1,3 @@
-
-mkdir $PREFIX/lib
+#Copy the GUI 
 mkdir $PREFIX/bin
-mkdir $PREFIX/include
-
-#No libs for gui?
-
-#Binaries
-cp build/bin/gui_client $PREFIX/bin/.
 cp build/bin/slsDetectorGui $PREFIX/bin/.
-
-
-#Which headers do we need for development??
-
-# cp include/some_lib.h $PREFIX/include/.

conda-recepie/copy_lib.sh

@@ -5,18 +5,20 @@ mkdir $PREFIX/include
 mkdir $PREFIX/include/slsDetectorPackage
 
 #Shared and static libraries
-cp build/bin/libSlsDetector.so $PREFIX/lib/.
-cp build/bin/libSlsReceiver.so $PREFIX/lib/.
-cp build/bin/libSlsSupport.so $PREFIX/lib/.
+# cp build/bin/libSlsDetector.so $PREFIX/lib/.
+# cp build/bin/libSlsReceiver.so $PREFIX/lib/.
+# cp build/bin/libSlsSupport.so $PREFIX/lib/.
+
+cp build/install/lib/* $PREFIX/lib/
 
 #Binaries
-cp build/bin/sls_detector_acquire $PREFIX/bin/.
-cp build/bin/sls_detector_get $PREFIX/bin/.
-cp build/bin/sls_detector_put $PREFIX/bin/.
-cp build/bin/sls_detector_help $PREFIX/bin/.
-cp build/bin/slsReceiver $PREFIX/bin/.
-cp build/bin/slsMultiReceiver $PREFIX/bin/.
+cp build/install/bin/sls_detector_acquire $PREFIX/bin/.
+cp build/install/bin/sls_detector_get $PREFIX/bin/.
+cp build/install/bin/sls_detector_put $PREFIX/bin/.
+cp build/install/bin/sls_detector_help $PREFIX/bin/.
+cp build/install/bin/slsReceiver $PREFIX/bin/.
+cp build/install/bin/slsMultiReceiver $PREFIX/bin/.
 
-#Which headers do we need for development??
-cp build/install/include/* $PREFIX/include/slsDetectorPackage/
-# cp include/some_lib.h $PREFIX/include/.
+
+cp build/install/include/* $PREFIX/include/
+cp -r build/install/share/ $PREFIX/share

conda-recepie/meta.yaml

@@ -1,13 +1,14 @@
 
 package:
   name: sls_detector_software
-  version: "developer"
+  version: {{ environ.get('GIT_DESCRIBE_TAG', '') }}
 
 source:
   - path: ..
 
 build:
-  number: 1
+  number: 0
+  binary_relocation: True
   rpaths:
     - lib/
 
@@ -16,10 +17,9 @@ requirements:
     - {{ compiler('c') }}
     - {{compiler('cxx')}}
     - cmake
-    # - qwt 6.* #require qt5 investigate befor activating gui
-    # - qt=4.8.7=7
-    - zeromq=4.2.5=hfc679d8_5
-    - pyzmq
+    - qwt 6.*
+    - qt 4.8.*
+    - zeromq
     - xorg-libx11
     - xorg-libice
     - xorg-libxext
@@ -37,6 +37,7 @@ requirements:
   host:
     - libstdcxx-ng
     - libgcc-ng
+    - zeromq
     - xorg-libx11
     - xorg-libice
     - xorg-libxext
@@ -46,75 +47,52 @@ requirements:
     - xorg-libxfixes
 
   run:
+    - zeromq
     - libstdcxx-ng
     - libgcc-ng 
 
 
 outputs:
-  - name: sls_detector_lib
+  - name: slsdetlib
     script: copy_lib.sh
 
-  - name: sls_detector
+    requirements:
+      run: 
+        - libstdcxx-ng
+        - libgcc-ng
+        - zeromq
+
+  - name: slsdet
+
     script: build_pylib.sh
 
     requirements:
       build:
+        - python
         - {{ compiler('c') }}
         - {{compiler('cxx')}}
-        - python {{ python }}
+        - {{ pin_subpackage('slsdetlib', exact=True) }}
         - setuptools
-        - sls_detector_lib
-        - pyzmq
-        - pybind11 2.4
+
       host:
         - python
-        - pybind11 2.4 
-        - pyzmq
-        - sls_detector_lib
+
+      run:
         - libstdcxx-ng
         - libgcc-ng
-      run:
         - python
         - numpy
-        - sls_detector_lib=developer
-        - pyzmq
-        - libstdcxx-ng
-        - libgcc-ng
+        - {{ pin_subpackage('slsdetlib', exact=True) }}
+
+
     test:
       imports:
-        - sls_detector
+        - slsdet
 
-    # requirements:
-    #   build:
-    #     - {{ compiler('c') }}
-    #     - {{compiler('cxx')}}
-
-  # - name: sls_detector_gui
-  #   version: "refactor"
-  #   script: copy_gui.sh
-  #   requirements:
-  #     build:
-  #     - {{ compiler('c') }}
-  #     - {{compiler('cxx')}}
-  #     - cmake
-  #     - qwt 6.*
-  #     - qt=4.8.7=7
-  #     - zeromq=4.2.5=hfc679d8_5
-  #     - pyzmq
-  #     - xorg-libx11
-  #     - xorg-libice
-  #     - xorg-libxext
-  #     - xorg-libsm
-  #     - xorg-libxau
-  #     - xorg-libxrender
-  #     - xorg-libxfixes
-  #     - {{ cdt('mesa-libgl-devel') }}      # [linux]
-  #     - {{ cdt('mesa-libegl-devel') }}     # [linux]
-  #     - {{ cdt('mesa-dri-drivers') }}      # [linux]
-  #     - {{ cdt('libselinux') }}      # [linux]
-  #     - {{ cdt('libxdamage') }}            # [linux]
-  #     - {{ cdt('libxxf86vm') }}            # [linux]
-  #     run:
-  #       - sls_detector_lib=refactor
-  #       - qwt 6.*
-  #       - qt=4.8.7=7
+  - name: slsdetgui
+    script: copy_gui.sh
+    requirements:
+      run:
+        - {{ pin_subpackage('slsdetlib', exact=True) }}
+        - qwt 6.*
+        - qt 4.8.*

ctbGui/CMakeLists.txt

@@ -71,6 +71,11 @@ target_link_libraries(ctbRootLib PUBLIC
     ${ROOT_EXE_LINKER_FLAGS}
 )
 
+set_target_properties(
+    ctbRootLib PROPERTIES
+    LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin
+)
+
 target_link_libraries(ctbGui PUBLIC 
     slsDetectorShared
     slsSupportLib
@@ -80,4 +85,5 @@ target_link_libraries(ctbGui PUBLIC
 
 set_target_properties(ctbGui PROPERTIES
     RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin
+
 )

ctbGui/ctbAcquisition.cpp

@@ -29,9 +29,10 @@
 #include "sls_detector_defs.h"
 #include "ctbMain.h"
 #include "moench03CtbData.h" 
-#include "moench03TCtbData.h" 
-#include "moench03T1CtbData.h" 
+//#include "moench03TCtbData.h" 
+//#include "moench03T1CtbData.h" 
 #include "moench03CommonMode.h" 
+#include "moench03T1ZmqDataNew.h" 
 #include "moench02CtbData.h" 
 //#include "jungfrau10ModuleData.h" 
 #include "moenchCommonMode.h" 
@@ -43,6 +44,9 @@
 #include "moench04CtbZmq10GbData.h"
 #include "deserializer.h"
 #include "detectorData.h"
+#include "imageZmq16bit.h"
+#include "imageZmq32bit.h"
+
 
 using namespace std;
 
@@ -232,7 +236,10 @@ hframe=new TGHorizontalFrame(this, 800,50);
   cbDetType->AddEntry("MOENCH02", MOENCH02);
   cbDetType->AddEntry("MOENCH04", MOENCH04);
   // cbDetType->AddEntry("JUNGFRAU1.0", 2);
-  //cbDetType->AddEntry("MOENCH03 T", iiii++);
+  cbDetType->AddEntry("MOENCH03",MOENCH03);
+  cbDetType->AddEntry("IMAGE32BIT",IMAGE32B);
+  cbDetType->AddEntry("IMAGE16BIT",IMAGE16B);
+
   //cbDetType->AddEntry("MOENCH03", iiii++);
   // cbDetType->AddEntry("MYTHEN3 0.1", MYTHEN301);
   // cbDetType->AddEntry("ADCSAR2", ADCSAR2);
@@ -271,7 +278,7 @@ hframe=new TGHorizontalFrame(this, 800,50);
 
 
 
-    cout << "off "<< endl;
+  //  cout << "off "<< endl;
 
 
   hframe=new TGHorizontalFrame(this, 800,50);
@@ -290,8 +297,8 @@ hframe=new TGHorizontalFrame(this, 800,50);
                                                TGNumberFormat::kNEANonNegative, 
 			     TGNumberFormat::kNELLimitMinMax,0,16535);
    hframe->AddFrame(eSerOff,new TGLayoutHints(kLHintsTop |  kLHintsExpandX, 1, 1, 1, 1));
-   eSerOff->MapWindow();;
-   eSerOff->SetNumber(5);
+   eSerOff->MapWindow();
+   eSerOff->SetNumber(0);
    e= eSerOff->TGNumberEntry::GetNumberEntry();
    eSerOff->Connect("ValueSet(Long_t)","ctbAcquisition",this,"ChangeSerialOffset(Long_t)");
    e->Connect("ReturnPressed()","ctbAcquisition",this,"ChangeSerialOffset()");
@@ -337,6 +344,53 @@ hframe=new TGHorizontalFrame(this, 800,50);
    
 
 
+  hframe=new TGHorizontalFrame(this, 800,50);
+  AddFrame(hframe,new TGLayoutHints(kLHintsTop | kLHintsExpandX , 10,10,10,10));
+  hframe->MapWindow();
+    
+ 
+
+  label=new TGLabel(hframe,"Image Pixels");
+  hframe->AddFrame(label,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 5, 5, 5, 5));
+  label->MapWindow();
+  label->SetTextJustify(kTextLeft);
+
+
+  label=new TGLabel(hframe,"X: ");
+  hframe->AddFrame(label,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 5, 5, 5, 5));
+  label->MapWindow();
+  label->SetTextJustify(kTextRight);
+
+
+  ePixX=new TGNumberEntry(hframe, 0, 9,999, TGNumberFormat::kNESInteger,
+                                               TGNumberFormat::kNEANonNegative, 
+			     TGNumberFormat::kNELLimitMinMax,0,16535);
+   hframe->AddFrame(ePixX,new TGLayoutHints(kLHintsTop |  kLHintsExpandX, 1, 1, 1, 1));
+   ePixX->MapWindow();
+   ePixX->SetNumber(400);
+   e= ePixX->TGNumberEntry::GetNumberEntry();
+   ePixX->Connect("ValueSet(Long_t)","ctbAcquisition",this,"ChangeImagePixels(Long_t)");
+   e->Connect("ReturnPressed()","ctbAcquisition",this,"ChangeImagePixels()");
+
+
+
+  label=new TGLabel(hframe,"Y: ");
+  hframe->AddFrame(label,new TGLayoutHints(kLHintsTop | kLHintsLeft| kLHintsExpandX, 5, 5, 5, 5));
+  label->MapWindow();
+  label->SetTextJustify(kTextRight);
+
+
+  ePixY=new TGNumberEntry(hframe, 0, 9,999, TGNumberFormat::kNESInteger,
+                                               TGNumberFormat::kNEANonNegative, 
+			     TGNumberFormat::kNELLimitMinMax,0,16535);
+   hframe->AddFrame(ePixY,new TGLayoutHints(kLHintsTop |  kLHintsExpandX, 1, 1, 1, 1));
+   ePixY->MapWindow();
+   ePixY->SetNumber(400);
+   e= ePixY->TGNumberEntry::GetNumberEntry();
+   ePixY->Connect("ValueSet(Long_t)","ctbAcquisition",this,"ChangeImagePixels(Long_t)");
+   e->Connect("ReturnPressed()","ctbAcquisition",this,"ChangeImagePixels()");
+
+
 
 
   hframe=new TGHorizontalFrame(this, 800,50);
@@ -609,8 +663,10 @@ hframe=new TGHorizontalFrame(this, 800,50);
   cout <<"Registering data callback" << endl;
   try {
     myDet->registerDataCallback(&dataCallback, (void*)this);
-  } CATCH_DISPLAY ("Could not get register call back.", "ctbAcquisition::ctbAcquisition")
-
+  } CATCH_DISPLAY ("Could not get register call back.", "ctbAcquisition::ctbAcquisition") 
+      try {
+	myDet->setRxZmqDataStream(true); 
+      } CATCH_DISPLAY ("Could not get set RxZmqDataStream.", "ctbAcquisition::ctbAcquisition") 
   cout <<"Done" << endl;
   
     //  mgAdcs=new TMultiGraph();
@@ -832,7 +888,7 @@ sample1 (dbit0 + dbit1 +...)if (cmd == "rx_dbitlist") {
 
   //  cout <<"global plot is " << globalPlot << endl;
   // cout << "*******************************************" <<endl;
-  // cout <<"------Plot: "<<  index << " prog:" << data->progressIndex << " npoints:" << data->npoints << " npy: " << data->npy << " " << data->fileName << " bytes: " << data->databytes << " dr:"<< data->dynamicRange << " fi: " << data ->fileIndex <<  endl;
+   cout <<"------Plot: "<<  index << " prog:" << data->progressIndex << " nx:" << data->nx << " ny: " << data->ny << " " << data->fileName << " bytes: " << data->databytes << " dr:"<< data->dynamicRange << " fi: " << data ->fileIndex <<  endl;
   if (globalPlot || cbGetPedestal->IsOn()) {
     //#ifdef TESTADC
     //  cout <<"------"<<  index << " " << ip << " " << data->npoints << endl;
@@ -859,6 +915,11 @@ sample1 (dbit0 + dbit1 +...)if (cmd == "rx_dbitlist") {
     nx=eNumCount->GetIntNumber();
     dr=eDynRange->GetIntNumber();
     soff=eSerOff->GetIntNumber();
+    // cout <<"deserializer: " << endl;
+    // cout << "Number of chans:\t" << nx << endl;
+    // cout << "Serial Offset:\t" << soff << endl;
+    // cout << "Dynamic range:\t" << dr << endl;
+    
   }
 
   i=0;
@@ -923,7 +984,8 @@ sample1 (dbit0 + dbit1 +...)if (cmd == "rx_dbitlist") {
       for (int y=0; y<ny; y++) {
 	ped=0;
 	aval=dataStructure->getValue(data->data,x,y);
-      
+	//aval=dataStructure->getChannel(data->data,x,y);
+	cout << x << " " <<y << " "<< aval << endl;
 	if (cbGetPedestal->IsOn()) {
 	  if (photonFinder) {
 	    photonFinder->addToPedestal(aval,x,y);
@@ -1094,8 +1156,20 @@ void ctbAcquisition::Draw(){
 void ctbAcquisition::changePlot(){
   if (rbPlotOff->IsOn()) {
     adcPlot=0;
-    dbitPlot=0;
+    dbitPlot=0;   
+    try {
+      myDet->registerDataCallback(nullptr, this);  
+    } CATCH_DISPLAY ("Could not get unregister call back.", "ctbAcquisition::ctbAcquisition")   
+    try {
+      myDet->setRxZmqDataStream(false); 
+    } CATCH_DISPLAY ("Could not get unset RxZmqDataStream.", "ctbAcquisition::ctbAcquisition") 
   } else {
+  try {
+    myDet->registerDataCallback(&dataCallback, (void*)this);
+  } CATCH_DISPLAY ("Could not get register call back.", "ctbAcquisition::ctbAcquisition")   
+    try {
+      myDet->setRxZmqDataStream(true); 
+    } CATCH_DISPLAY ("Could not get set RxZmqDataStream.", "ctbAcquisition::ctbAcquisition") 
     adcPlot=0;
     dbitPlot=0;
     for (int ii=0; ii<NADCS; ii++)
@@ -1200,6 +1274,9 @@ void ctbAcquisition::changeDetector(){
    eNumCount->SetState(kFALSE);
   eDynRange->SetState(kFALSE);
   eSerOff->SetState(kFALSE);
+  ePixX->SetState(kFALSE);
+  ePixY->SetState(kFALSE);
+    
   deserializer=0;
   if (rb2D->IsOn() ) {//|| rbScan->IsOn()
     switch  (cbDetType->GetSelected()) {
@@ -1210,7 +1287,6 @@ void ctbAcquisition::changeDetector(){
       // commonMode=new moench03CommonMode();
       break;
      case MOENCH04:
-
       try {
         auto retval = myDet->getTenGiga().tsquash("Different values");
         if (retval) {
@@ -1223,6 +1299,54 @@ void ctbAcquisition::changeDetector(){
        cout << "MOENCH 0.4!" << endl;
        commonMode=new moench03CommonMode();
       break;
+     case MOENCH03:
+       //try {
+	// auto retval = myDet->getTenGiga().tsquash("Different values");
+	// if (retval) {
+          dataStructure=new moench03T1ZmqDataNew(nAnalogSamples); 
+        // } else {
+        //   dataStructure=new moench04CtbZmqData(nAnalogSamples, nDigitalSamples); 
+        // }
+	  //} CATCH_DISPLAY ("Could not get ten giga enable.", "ctbAcquisition::changeDetector")
+
+       cout << "MOENCH 0.3! USE JUNGFRAU MODULE!" << endl;
+       commonMode=new moench03CommonMode();
+      break;
+       case IMAGE32B:
+       //try {
+       	// auto retval = myDet->getTenGiga().tsquash("Different values");
+       	// if (retval) {
+       	// if (deserializer) {
+       	   ePixX->SetState(kTRUE);
+       	   ePixY->SetState(kTRUE);
+       	   // }
+       	 dataStructure=new imageZmq32bit(ePixX->GetIntNumber(),ePixY->GetIntNumber()); 
+        // } else {
+        //   dataStructure=new moench04CtbZmqData(nAnalogSamples, nDigitalSamples); 
+        // }
+       	  //} CATCH_DISPLAY ("Could not get ten giga enable.", "ctbAcquisition::changeDetector")
+
+       	 cout << "Image 32bit, no channel shuffling" << endl;
+       commonMode=NULL;
+       break;
+   
+       case IMAGE16B:
+       //try {
+	// auto retval = myDet->getTenGiga().tsquash("Different values");
+	// if (retval) {
+	// if (deserializer) {
+	   ePixX->SetState(kTRUE);
+	   ePixY->SetState(kTRUE);
+	   // }
+	 dataStructure=new imageZmq16bit(ePixX->GetIntNumber(),ePixY->GetIntNumber()); 
+        // } else {
+        //   dataStructure=new moench04CtbZmqData(nAnalogSamples, nDigitalSamples); 
+        // }
+	  //} CATCH_DISPLAY ("Could not get ten giga enable.", "ctbAcquisition::changeDetector")
+
+	 cout << "Image 16bit, no channel shuffling" << endl;
+       commonMode=NULL;
+       break;
    
     // case 1:
     //   cout << "************** T!!!!!!!!!!" << endl;
@@ -1286,6 +1410,7 @@ void ctbAcquisition::changeDetector(){
 	photonFinder=new singlePhotonDetector(dataStructure,csize,nsigma,1,cm); //sign is positive - should correct with ADC mask, no common mode 
 	//photonFinder=new singlePhotonDetector(dataStructure,csize,nsigma,1,cm); //sign is positive - should correct with ADC mask, no common mode
 	dataStructure->getDetectorSize(nx,ny);
+	
       }
       if (deserializer) {
 	ny=1;
@@ -1511,20 +1636,23 @@ void ctbAcquisition::update() {
 
    if (dataStructure) {
      cout << cbDetType->GetSelected()<< endl;
-    if (cbDetType->GetSelected()==MYTHEN301 || cbDetType->GetSelected()==MYTHEN302){
-      cout << "settings deserialiation parameters for MYTHEN" << endl;
-      mythen3_01_jctbData* ms=(mythen3_01_jctbData*)dataStructure;
-      eSerOff->SetNumber( ms->setSerialOffset(-1));
-      eDynRange->SetNumber( ms->setDynamicRange(-1));
-      eNumCount->SetNumber( ms->setNumberOfCounters(-1));
-    }
+    // if (cbDetType->GetSelected()==MYTHEN301 || cbDetType->GetSelected()==MYTHEN302){
+    //   cout << "settings deserialiation parameters for MYTHEN" << endl;
+    //   mythen3_01_jctbData* ms=(mythen3_01_jctbData*)dataStructure;
+    //   eSerOff->SetNumber( ms->setSerialOffset(-1));
+    //   eDynRange->SetNumber( ms->setDynamicRange(-1));
+    //   eNumCount->SetNumber( ms->setNumberOfCounters(-1));
+    // }
     
    }
 
-  try {
-    dBitOffset = myDet->getRxDbitOffset().tsquash("Different values");
-  } CATCH_DISPLAY ("Could not get receiver dbit offset", "ctbAcquisition::update")
-
+  if (myDet->getDetectorType().squash() == slsDetectorDefs::MOENCH) {
+    dBitOffset = 0;
+  } else {
+    try {
+      dBitOffset = myDet->getRxDbitOffset().tsquash("Different values");
+    } CATCH_DISPLAY ("Could not get receiver dbit offset", "ctbAcquisition::update")
+  }
   try {
     tenG = myDet->getTenGiga().tsquash("Different values");
   } CATCH_DISPLAY ("Could not get ten giga enable", "ctbAcquisition::update")
@@ -1610,9 +1738,13 @@ void ctbAcquisition::toggleAcquisition() {
     setDigitalSamples(retval);
   } CATCH_DISPLAY ("Could not get number of digital samples", "ctbAcquisition::toggleAcquisition")
   
+  if (myDet->getDetectorType().squash() == slsDetectorDefs::MOENCH) {
+    dBitOffset = 0;
+  } else {
   try {
-    dBitOffset = myDet->getRxDbitOffset().tsquash("Different values");
-  } CATCH_DISPLAY ("Could not get receiver dbit offset", "ctbAcquisition::toggleAcquisition")
+      dBitOffset = myDet->getRxDbitOffset().tsquash("Different values");
+    } CATCH_DISPLAY ("Could not get receiver dbit offset", "ctbAcquisition::toggleAcquisition")
+  }
 
   try {
     roMode = static_cast<int>(myDet->getReadoutMode().tsquash("Different values"));
@@ -1849,14 +1981,18 @@ void ctbAcquisition::setDbitEnable(Int_t reg){
 void ctbAcquisition::updateChans() {
 
   // dbit list
-  try { 
-    auto retval = myDet->getRxDbitList().tsquash("Different values");
+  if (myDet->getDetectorType().squash() == slsDetectorDefs::MOENCH) {
     dbitlist.clear();
-    if (!retval.empty()) {
-      for (const auto &value : retval) 
-        dbitlist.push_back(value);
-    }
-  } CATCH_DISPLAY ("Could not get receiver dbit list.", "ctbAcquisition::updateChans")
+  } else {
+    try {
+      auto retval = myDet->getRxDbitList().tsquash("Different values");
+      dbitlist.clear();
+      if (!retval.empty()) {
+        for (const auto &value : retval) 
+          dbitlist.push_back(value);
+      }
+    } CATCH_DISPLAY ("Could not get receiver dbit list.", "ctbAcquisition::updateChans")
+  }
 
   // adc mask
   try { 
@@ -1977,20 +2113,22 @@ void ctbAcquisition::ChangeNumberOfChannels(Long_t a){
 
 
 void ctbAcquisition::ChangeSerialOffset(){
+  changeDetector();
   // if (dataStructure) {
 
-  //   //  cout << cbDetType->GetSelected()<< endl;
-  //   // if (cbDetType->GetSelected()==MYTHEN301 || cbDetType->GetSelected()==MYTHEN302 ){
-  //   //   cout << "settings offsets for MYTHEN" << endl;
-  //   //   mythen3_01_jctbData* ms=(mythen3_01_jctbData*)dataStructure;
-  //   //   ms->setSerialOffset(eSerOff->GetIntNumber());
+  //    cout << cbDetType->GetSelected()<< endl;
+  //   if (cbDetType->GetSelected()==MYTHEN301 || cbDetType->GetSelected()==MYTHEN302 ){
+  //     cout << "settings offsets for MYTHEN" << endl;
+  //     mythen3_01_jctbData* ms=(mythen3_01_jctbData*)dataStructure;
+  //     ms->setSerialOffset(eSerOff->GetIntNumber());
       
-  //   // }
+  //   }
   // }
 };
 
 
 void ctbAcquisition::ChangeDynamicRange(){
+  changeDetector();
   // if (dataStructure) {
 
   //    cout << cbDetType->GetSelected()<< endl;
@@ -2004,6 +2142,7 @@ void ctbAcquisition::ChangeDynamicRange(){
 };
 
 void ctbAcquisition::ChangeNumberOfChannels(){
+  changeDetector();
   // if (dataStructure) {
   //    cout << cbDetType->GetSelected()<< endl;
   //   if (cbDetType->GetSelected()==MYTHEN301 || cbDetType->GetSelected()==MYTHEN302){
@@ -2017,6 +2156,24 @@ void ctbAcquisition::ChangeNumberOfChannels(){
     changePlot();
 };
 
+void ctbAcquisition::ChangeImagePixels(Long_t a){
+  ChangeImagePixels();
+};
+
+void ctbAcquisition::ChangeImagePixels(){
+  changeDetector();
+  // if (dataStructure) {
+  //    cout << cbDetType->GetSelected()<< endl;
+  //   if (cbDetType->GetSelected()==MYTHEN301 || cbDetType->GetSelected()==MYTHEN302){
+  //     cout << "settings number of channels for MYTHEN" << endl;
+  //     mythen3_01_jctbData* ms=(mythen3_01_jctbData*)dataStructure;
+  //     ms->setNumberOfCounters(eNumCount->GetIntNumber());
+      
+  //   }
+  // }
+  // if (deserializer)
+  //  changePlot();
+};
 
 
 void ctbAcquisition::ChangeHistoLimitsPedSub(Long_t a){

ctbGui/ctbAcquisition.h

@@ -42,7 +42,7 @@ using namespace std;
 class ctbAcquisition : public TGGroupFrame {
 
 
-  enum {DESERIALIZER, MOENCH04, MOENCH02, ADCSAR2, MYTHEN301, MYTHEN302};
+  enum {DESERIALIZER, MOENCH04, MOENCH02, MOENCH03, IMAGE32B, IMAGE16B, ADCSAR2, MYTHEN301, MYTHEN302};
 
 
  private:
@@ -57,6 +57,9 @@ class ctbAcquisition : public TGGroupFrame {
   TGNumberEntry *eNumCount;
 
 
+  TGNumberEntry *ePixX;
+  TGNumberEntry *ePixY;
+
   TGNumberEntry *eFitADC;
   TGNumberEntry *eBitPlot;
   TGNumberEntry *eMinRaw;
@@ -231,7 +234,8 @@ class ctbAcquisition : public TGGroupFrame {
    void ChangeNumberOfChannels(Long_t);
    void ChangeDynamicRange();
    void ChangeDynamicRange(Long_t);
-
+   void ChangeImagePixels();
+   void ChangeImagePixels(Long_t);
 
    void canvasClicked();
    void FitADC();

ctbGui/ctbDacs.cpp

@@ -108,15 +108,26 @@ string ctbDac::getLabel() {
 
 }
 
+int ctbDac::getMoenchDacId() {
+  slsDetectorDefs::dacIndex moenchDacIndices[8] = {slsDetectorDefs::VBP_COLBUF, slsDetectorDefs::VIPRE, slsDetectorDefs::VIN_CM, slsDetectorDefs::VB_SDA, slsDetectorDefs::VCASC_SFP, slsDetectorDefs::VOUT_CM, slsDetectorDefs::VIPRE_CDS, slsDetectorDefs::IBIAS_SFP}; 
+
+  if (id >= 8) {
+    return id;
+  }
+  return static_cast<int>(moenchDacIndices[id]);
+}
 
 void ctbDac::setValue(Long_t a) {setValue();}
 
 void ctbDac::setValue() {
-
   cout << "setting dac! "<< id << " value " << dacsEntry->GetIntNumber() << " units " << dacsUnit->IsOn() << endl;
 
   try {
-    myDet->setDAC(static_cast<slsDetectorDefs::dacIndex>(id), dacsEntry->GetIntNumber(), dacsUnit->IsOn()); 
+    int sid = id;
+    if (myDet->getDetectorType().squash() == slsDetectorDefs::MOENCH) {
+      sid = getMoenchDacId();
+    }
+    myDet->setDAC(static_cast<slsDetectorDefs::dacIndex>(sid), dacsEntry->GetIntNumber(), dacsUnit->IsOn()); 
   } CATCH_DISPLAY ("Could not set dac " + to_string(id) + ".", "ctbDac::setValue")
 
   getValue();
@@ -128,7 +139,11 @@ void ctbDac::setOn(Bool_t b) {
     setValue();
   } else {
     try {
-      myDet->setDAC(static_cast<slsDetectorDefs::dacIndex>(id), -100, false);
+      int sid = id;
+      if (myDet->getDetectorType().squash() == slsDetectorDefs::MOENCH) {
+	sid = getMoenchDacId();
+      }
+      myDet->setDAC(static_cast<slsDetectorDefs::dacIndex>(sid), -100, false);
     } CATCH_DISPLAY ("Could not power off dac " + to_string(id) + ".", "ctbDac::setOn")
   }
   getValue();
@@ -136,7 +151,11 @@ void ctbDac::setOn(Bool_t b) {
 
 int ctbDac::getValue() { 
   try {
-    int val = myDet->getDAC(static_cast<slsDetectorDefs::dacIndex>(id), dacsUnit->IsOn()).tsquash("Different values"); 
+    int sid = id;
+    if (myDet->getDetectorType().squash() == slsDetectorDefs::MOENCH) {
+      sid = getMoenchDacId();
+    }
+    int val = myDet->getDAC(static_cast<slsDetectorDefs::dacIndex>(sid), dacsUnit->IsOn()).tsquash("Different values"); 
     cout << "dac " << id << " " << val << endl;
     dacsValue->SetText(to_string(val).c_str());
     if (val >= 0) {

ctbGui/ctbDacs.h

@@ -45,7 +45,7 @@ class ctbDac : public TGHorizontalFrame {
    
    int setLabel(char *tit, int mv);
    string getLabel();
-
+int getMoenchDacId();
 
 
    ClassDef(ctbDac,0)
@@ -54,8 +54,6 @@ class ctbDac : public TGHorizontalFrame {
 class ctbDacs : public TGGroupFrame {
 private:
   
-
-
    ctbDac *dacs[NDACS+2];
 
    sls::Detector* myDet;

ctbGui/ctbDefs.h

@@ -71,14 +71,14 @@ class ctbDefs {
                     std::string exceptionMessage,
                     std::string source) {
         // because sls_detector_exceptions cannot be included
-        if (exceptionMessage.find("hared memory")) {
+      if (exceptionMessage.find("hared memory") != std::string::npos) {
             throw;
         }
-        if (exceptionMessage.find("annot connect")) {
+      if (exceptionMessage.find("annot connect") != std::string::npos) {
             throw;
         }
         cprintf(RED, "Warning (%s): %s [Caught Exception: %s]\n", source.c_str(), message.c_str(), exceptionMessage.c_str());
         //return Message(qDefs::WARNING, message + std::string("\nCaught exception:\n") + exceptionMessage, source);
     }; 
 
-};
+};

ctbGui/ctbMain.cpp

@@ -259,8 +259,10 @@ ctbMain::ctbMain(const TGWindow *p, sls::Detector *det)
 
    cout << "connect mtab" << endl;
 
-   
-   setReadoutMode(pat->getReadoutMode());
+  try{  
+   setReadoutMode(pat->getReadoutMode());  
+  } CATCH_DISPLAY ("Could not get readout flags", "ctbPattern::getReadoutMode")
+
    setADCEnable(adcs->setEnable());
    setAnalogSamples(pat->getAnalogSamples());
    setDigitalSamples(pat->getDigitalSamples());

ctbGui/ctbPattern.cpp

@@ -1035,33 +1035,42 @@ void ctbPattern::readoutModeChanged(int flags) {
 
 }
 
-int ctbPattern::getReadoutMode() {
-  try{
-    auto retval = myDet->getReadoutMode().tsquash("Different values");
-    switch(retval) {
-      case slsDetectorDefs::ANALOG_AND_DIGITAL:
-        cout << "analog and digital" << endl;
-        cbAnalog->SetOn(kTRUE);
-        cbDigital->SetOn(kTRUE);
-        break;
-      case slsDetectorDefs::DIGITAL_ONLY:
-        cout << "digital only" << endl;
-        cbAnalog->SetOn(kFALSE);
-        cbDigital->SetOn(kTRUE);
-        break;
-      case slsDetectorDefs::ANALOG_ONLY:
-        cout << "analog only" << endl;
-        cbAnalog->SetOn(kTRUE);
-        cbDigital->SetOn(kFALSE);    
-        break;
-      default:
-        throw("unknown readout flag");
-    }
+int ctbPattern::getReadoutMode() {  
+ int retval=slsDetectorDefs::ANALOG_ONLY;
+    
+ if (myDet->getDetectorType().squash() == slsDetectorDefs::CHIPTESTBOARD) {
+   try{
+     retval = myDet->getReadoutMode().tsquash("Different values");
+   } CATCH_DISPLAY ("Could not get readout flags", "ctbPattern::getReadoutMode")
+      
+   switch(retval) {
+   case slsDetectorDefs::ANALOG_AND_DIGITAL:
+     cout << "analog and digital" << endl;
+     cbAnalog->SetOn(kTRUE);
+     cbDigital->SetOn(kTRUE);
+     break;
+   case slsDetectorDefs::DIGITAL_ONLY:
+     cout << "digital only" << endl;
+     cbAnalog->SetOn(kFALSE);
+     cbDigital->SetOn(kTRUE);
+     break;
+   case slsDetectorDefs::ANALOG_ONLY:
+     cout << "analog only" << endl;
+     cbAnalog->SetOn(kTRUE);
+     cbDigital->SetOn(kFALSE);    
+     break;
+   default:
+     throw("unknown readout flag");
+   }
+ } else {
+   cbAnalog->SetOn(kTRUE);
+   cbDigital->SetOn(kFALSE);    
+ }
+    
     Emit("readoutModeChanged(int)",static_cast<int>(retval));
     return retval;
-  } CATCH_DISPLAY ("Could not get readout flags", "ctbPattern::getReadoutMode")
-
-  return -1;
+ 
+ 
 }
 
 int ctbPattern::getAnalogSamples() {
@@ -1075,13 +1084,17 @@ int ctbPattern::getAnalogSamples() {
   return -1;
 }
    
-int ctbPattern::getDigitalSamples() {
-  try{
-    auto retval = myDet->getNumberOfDigitalSamples().tsquash("Different values");
-    eDigitalSamples->SetNumber((Double_t)retval);
-    Emit("digitalSamplesChanged(const int)", eDigitalSamples->GetNumber());
-    return eDigitalSamples->GetNumber();
-  } CATCH_DISPLAY ("Could not get number of triggers.", "ctbPattern::update")
+int ctbPattern::getDigitalSamples() { 
+  int retval=0;
+  if (myDet->getDetectorType().squash() == slsDetectorDefs::CHIPTESTBOARD) {
+    try{
+      auto retval = myDet->getNumberOfDigitalSamples().tsquash("Different values"); 
+    } CATCH_DISPLAY ("Could not get number of digital samples.", "ctbPattern::getDigitalSamples")
+	}
+  eDigitalSamples->SetNumber((Double_t)retval);
+  Emit("digitalSamplesChanged(const int)", eDigitalSamples->GetNumber());
+  return eDigitalSamples->GetNumber();
+ 
 
   return -1;
 }

ctbGui/ctbSignals.cpp

@@ -374,33 +374,43 @@ void ctbSignals::update() {
 
   } CATCH_DISPLAY ("Could not get patternIOcontrol.", "ctbSignals::update")
 
-  try {
-
-    auto dbitlist = myDet->getRxDbitList().tsquash("Different values");
+  if (myDet->getDetectorType().squash() == slsDetectorDefs::MOENCH) {
     // enable all
-    if (dbitlist.empty()) {
-      for (int is=0; is<64; is++) {
-        signals[is]->setDbitList(1);
-      } 
-    }
-    else {
-      // disable all
-      for (int is=0; is<64; is++) {
-        signals[is]->setDbitList(0);
+    for (int is=0; is<64; is++) {
+      signals[is]->setDbitList(1);
+    } 
+    eDbitOffset->SetNumber(0);
+  } 
+  
+  // ctb
+  else {
+    try {
+
+      auto dbitlist = myDet->getRxDbitList().tsquash("Different values");
+      // enable all
+      if (dbitlist.empty()) {
+        for (int is=0; is<64; is++) {
+          signals[is]->setDbitList(1);
+        } 
       }
-      // enable selected
-      for (const auto &value : dbitlist)  {
-        signals[value]->setDbitList(1);
+      else {
+        // disable all
+        for (int is=0; is<64; is++) {
+          signals[is]->setDbitList(0);
+        }
+        // enable selected
+        for (const auto &value : dbitlist)  {
+          signals[value]->setDbitList(1);
+        }
       }
-    }
 
-  } CATCH_DISPLAY ("Could not get receiver dbit list.", "ctbSignals::update")
-
-  try {
-    auto val = myDet->getRxDbitOffset().tsquash("Different values");
-    eDbitOffset->SetNumber(val);
-  } CATCH_DISPLAY ("Could not get receiver dbit offset.", "ctbSignals::update")
+    } CATCH_DISPLAY ("Could not get receiver dbit list.", "ctbSignals::update")
 
+    try {
+      auto val = myDet->getRxDbitOffset().tsquash("Different values");
+      eDbitOffset->SetNumber(val);
+    } CATCH_DISPLAY ("Could not get receiver dbit offset.", "ctbSignals::update")
+  }
 }
 
 

ctbGui/patternGenerator/generate.sh

@@ -21,6 +21,7 @@ if [ -f "$infile" ]
 then
 gcc -DINFILE="\"$infile\"" -DOUTFILE="\"$outfile\""  -DOUTFILEBIN="\"$outfilebin\"" -o $exe generator.c ; 
 echo compiling
+echo gcc -DINFILE="\"$infile\"" -DOUTFILE="\"$outfile\""  -DOUTFILEBIN="\"$outfilebin\"" -o $exe generator.c ; 
 $exe ; 
 echo cleaning
 rm $exe

docs/CMakeLists.txt

@@ -1,69 +1,75 @@
-find_package(Doxygen)
-find_package(Sphinx)
+find_package(Doxygen REQUIRED)
+find_package(Sphinx REQUIRED)
 
 
-if (DOXYGEN_FOUND AND SPHINX_FOUND)
-    message(${CMAKE_PROJECT_SORURCE_DIR}/slsDetectorSoftware/src)
-    # Utility to generate command line documentation
-    add_executable(gendoc src/gendoc.cpp)
-    # This is a bit hacky, but better than exposing stuff? 
-    target_include_directories(gendoc PRIVATE ${PROJECT_SOURCE_DIR}/slsDetectorSoftware/src)
-    target_link_libraries(gendoc PRIVATE
-      slsDetectorShared
-    )
-    set_target_properties(gendoc PROPERTIES 
-      RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin
-    )
 
-    
-    
 
-    #Doxygen
-    set(DOXYGEN_IN ${CMAKE_CURRENT_SOURCE_DIR}/Doxyfile.in)
-    set(DOXYGEN_OUT ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile)
-    configure_file(${DOXYGEN_IN} ${DOXYGEN_OUT} @ONLY)
+# Utility to generate command line documentation
+add_executable(gendoc src/gendoc.cpp)
+# This is a bit hacky, but better than exposing stuff? 
+target_include_directories(gendoc PRIVATE ${PROJECT_SOURCE_DIR}/slsDetectorSoftware/src)
+target_link_libraries(gendoc PRIVATE
+  slsDetectorShared
+)
+set_target_properties(gendoc PROPERTIES 
+  RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin
+)
 
-    #Sphinx
-    set(SPHINX_SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/src)
-    set(SPHINX_BUILD ${CMAKE_CURRENT_BINARY_DIR})
 
-    set(SPHINX_SOURCE_FILES
-      src/commandline.rst
-      src/container_utils.rst
-      src/dependencies.rst
-      src/detector.rst
-      src/index.rst
-      src/installation.rst
-      src/pydetector.rst
-      src/pyenums.rst
-      src/pyexamples.rst
-      src/receiver.rst
-      src/result.rst
-      src/type_traits.rst
-      src/ToString.rst
-      
-    )
 
-    foreach(filename ${SPHINX_SOURCE_FILES})
-      configure_file(${CMAKE_CURRENT_SOURCE_DIR}/${filename} 
-                    "${SPHINX_BUILD}/${filename}")
-    endforeach(filename ${SPHINX_SOURCE_FILES})
 
-    configure_file(
-        "${CMAKE_CURRENT_SOURCE_DIR}/conf.py.in"
-        "${SPHINX_BUILD}/conf.py"
-        @ONLY)
+#Doxygen
+set(DOXYGEN_IN ${CMAKE_CURRENT_SOURCE_DIR}/Doxyfile.in)
+set(DOXYGEN_OUT ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile)
+configure_file(${DOXYGEN_IN} ${DOXYGEN_OUT} @ONLY)
 
-    add_custom_target(docs
-                    gendoc
-                    COMMAND ${DOXYGEN_EXECUTABLE} ${DOXYGEN_OUT}
-                    COMMAND ${SPHINX_EXECUTABLE} -a -b html
-                    -Dbreathe_projects.slsDetectorPackage=${CMAKE_CURRENT_BINARY_DIR}/xml
-                    -c "${SPHINX_BUILD}"
-                    ${SPHINX_BUILD}/src 
-                    ${SPHINX_BUILD}/html
-                    COMMENT "Generating documentation with Sphinx")
+#Sphinx
+set(SPHINX_SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/src)
+set(SPHINX_BUILD ${CMAKE_CURRENT_BINARY_DIR})
 
-else (DOXYGEN_FOUND AND SPHINX_FOUND)
-  message("Doxygen and Sphinx are needed to build documentation")
-endif (DOXYGEN_FOUND AND SPHINX_FOUND)
+set(SPHINX_SOURCE_FILES
+  src/commandline.rst
+  src/container_utils.rst
+  src/consuming.rst
+  src/dependencies.rst
+  src/detector.rst
+  src/index.rst
+  src/installation.rst
+  src/pydetector.rst
+  src/pyenums.rst
+  src/pyexamples.rst
+  src/receiver.rst
+  src/result.rst
+  src/type_traits.rst
+  src/ToString.rst
+  src/examples.rst
+  
+)
+
+foreach(filename ${SPHINX_SOURCE_FILES})
+configure_file(${CMAKE_CURRENT_SOURCE_DIR}/${filename} 
+              "${SPHINX_BUILD}/${filename}")
+endforeach(filename ${SPHINX_SOURCE_FILES})
+
+configure_file(
+  "${CMAKE_CURRENT_SOURCE_DIR}/conf.py.in"
+  "${SPHINX_BUILD}/conf.py"
+  @ONLY)
+
+add_custom_target(docs
+              gendoc
+              COMMAND ${DOXYGEN_EXECUTABLE} ${DOXYGEN_OUT}
+              COMMAND ${SPHINX_EXECUTABLE} -a -b html
+              -Dbreathe_projects.slsDetectorPackage=${CMAKE_CURRENT_BINARY_DIR}/xml
+              -c "${SPHINX_BUILD}"
+              ${SPHINX_BUILD}/src 
+              ${SPHINX_BUILD}/html
+              COMMENT "Generating documentation with Sphinx")
+
+add_custom_target(rst
+              COMMAND ${SPHINX_EXECUTABLE} -a -b html
+              -Dbreathe_projects.slsDetectorPackage=${CMAKE_CURRENT_BINARY_DIR}/xml
+              -c "${SPHINX_BUILD}"
+              ${SPHINX_BUILD}/src 
+              ${SPHINX_BUILD}/html
+              COMMENT "Generating documentation with Sphinx")

docs/conf.py.in

@@ -21,7 +21,7 @@ print(sys.path)
 # -- Project information -----------------------------------------------------
 
 project = 'slsDetectorPackage'
-copyright = '2019, PSD Detector Group'
+copyright = '2020, PSD Detector Group'
 author = 'PSD Detector Group'
 version = '@PROJECT_VERSION@'
 

docs/src/consuming.rst

@@ -0,0 +1,116 @@
+Consuming slsDetectorPackage
+===============================
+
+Depending on how you want to build your integration with 
+slsDetectorPackage there are a few different ways to 
+consume our package. The recommended way is to use one of the 
+CMake approaches. 
+
+
+
+CMake: slsDetectorPackage as submodule in your project
+---------------------------------------
+
+If you are using CMake to build your integration and want to build everything
+in one go, we support adding slsDetectorPackage as a subfolder in your cmake project. 
+
+A minimal CMakeLists.txt could look like this: 
+
+.. code-block:: cmake
+
+    project(myDetectorIntegration)
+    cmake_minimum_required(VERSION 3.12)
+    add_subdirectory(slsDetectorPackage)
+
+    #Add your executable
+    add_executable(example main.cpp)
+    target_compile_features(example PRIVATE cxx_std_11)
+
+    #Link towards slsDetectorShared
+    target_link_libraries(example slsDetectorShared)
+
+A fully working example can be found at:
+
+https://github.com/slsdetectorgroup/cmake-subfolder-example
+
+
+CMake: find_package(slsDetectorPackage)
+------------------------------------------
+
+If you have compiled and installed slsDetectorPackage we also support
+find_package in CMake. If installed in a system wide location no path
+should be needed, otherwise specify cmake prefix path. 
+
+.. code-block:: cmake 
+
+    cmake_minimum_required(VERSION 3.12)
+    project(myintegration)
+
+    find_package(slsDetectorPackage 5.0 REQUIRED)
+    add_executable(example main.cpp)
+    target_link_libraries(example slsDetectorShared)
+
+
+Then assuming the slsDetectorPackage is installed in /path/to/sls/install
+you should be able to configure and build your project in this way. 
+
+.. code-block:: bash
+
+    cmake ../path/to/your/source -DCMAKE_PREFIX_PATH=/path/to/sls/install
+    make
+
+
+A minimal example is available at: https://github.com/slsdetectorgroup/minimal-cmake
+
+
+CMake: find_package and conda
+----------------------------------
+
+.. note::
+
+    conda can also be used for installing dependencies such as zmq, Qt4 etc. 
+
+find_package(slsDetectorPackage) also works if you have installed slsDetectorPackage using conda.
+The only difference is that you point CMake to $CONDA_PREFIX 
+
+
+.. code-block:: bash
+
+    #assuming myenv contains slsdetlib
+    conda activate myenv
+    cmake ../path/to/your/source -DCMAKE_PREFIX_PATH=$CONDA_PREFIX
+    make
+
+Depending on your system compiler you might also have to install gxx_linux-64 to compiled.
+
+No tools minimal approach
+-----------------------------
+
+While not recommended it is still possible to specify the include and library paths
+manually when invoking g++. This can sometimes be handy for a quick try. 
+
+.. code-block:: cpp
+
+    #include "Detector.h"
+    #include <iostream>
+    int main(){
+
+        sls::Detector det;
+
+        //Get all values and print them
+        std::cout << "Hostname: " << det.getHostname() << "\n";
+        std::cout << "Type: " << det.getDetectorType() << "\n";
+        std::cout << "Udp ip: " << det.getSourceUDPIP() << "\n";
+
+
+        //Get mac addr 
+        const int module = 0;
+        auto mac = det.getSourceUDPMAC()[module];
+        std::cout << "Mac addr of module "<< module <<  " is " <<  mac.str() << '\n'; 
+
+    }     
+
+
+.. code-block:: bash
+
+    g++ -I/install/path/include/  -L/install/path/lib64/ myapp.cpp -lSlsDetector -lSlsSupport -Wl,-rpath=../install/path/lib64

docs/src/dependencies.rst

@@ -13,7 +13,7 @@ To use the basic building blocks, meaning sls_detector_get/put and
 the shared libraries these are needed: 
 
  * Linux, preferably recent kernel (currently no cross platform support)
- * CMake > 3.9 
+ * CMake > 3.12 
  * C++11 compatible compiler. (We test with gcc and clang)
  * ZeroMQ version 4
 
@@ -24,7 +24,7 @@ GUI
 The GUI is currently using Qt4 but watch out for an upgrade to 5. 
 
  * Qt 4.8
- * Qwt 6
+ * Qwt 6.1
 
 -----------------------
 Python bindings
@@ -42,7 +42,7 @@ The documentation that you are reading now is built with
 
  * Doxygen (to extract C++ classes etc.)
  * Breathe (Sphinx plugin to handle doxygen xml)
- * Sphinx 
+ * Sphinx with sphinx_rtd_theme 
 
 -----------------------
 Packaged in libs/

docs/src/examples.rst

@@ -0,0 +1,115 @@
+
+
+
+Examples
+===========
+
+Setup 
+------------
+
+The examples here assume that you have compiled and installed slsDetectorPackage
+to ~/sls/install and that the option for SLS_USE_SIMULATOR was enabled. This also builds
+the virtual detector servers that we will be using for testing. 
+
+We also add ~/sls/detector/install/bin to the path for convenience. 
+
+Compile examples
+-------------------
+
+The source code of the examples is available at:
+https://github.com/slsdetectorgroup/api-examples
+
+
+.. code-block:: bash
+
+    git clone https://github.com/slsdetectorgroup/api-examples.git
+    mkdir build && cd build
+    cmake ../api-examples -DCMAKE_PREFIX_PATH=~/sls/detector/install
+    make
+
+Below follows a short description of what is included in the examples.
+
+
+Running a config file [e1]
+-----------------------------
+
+
+.. code-block:: cpp
+
+    #include "Detector.h"
+    ...
+    sls::Detector det;
+    det.loadConfig("path/to/config/file.config");
+
+
+
+To configure the connection between PC and detector the easiest 
+is to run a config file. For this example we first launch a virtual Jungfrau server and
+then set up the detector. 
+
+**Launch a virtual detector server**
+
+.. code-block:: bash
+
+    jungfrauDetectorServer_virtual
+
+This launches a virtual Jungfrau detector server. As default is uses port 1952 and 1953
+for communication over TCP. Most commands go on 1952 and only stop and status on 1953. 
+
+**Run example to configure**
+
+.. code-block:: bash
+
+    ./e1-config one_det_no_receiver.config
+    - 12:01:06.371 INFO: Shared memory deleted /slsDetectorPackage_multi_0_sls_0
+    - 12:01:06.371 INFO: Shared memory deleted /slsDetectorPackage_multi_0
+    - 12:01:06.372 INFO: Shared memory created /slsDetectorPackage_multi_0
+    - 12:01:06.376 INFO: Loading configuration file: one_det_no_receiver.config
+    - 12:01:06.376 INFO: Adding detector localhost
+    - 12:01:06.377 INFO: Shared memory created /slsDetectorPackage_multi_0_sls_0
+    - 12:01:06.377 INFO: Checking Detector Version Compatibility
+    - 12:01:06.378 INFO: Detector connecting - updating!
+    hostname [localhost]
+
+
+    Jungfrau detector with 1 modules configured
+
+
+Using the return type sls::Result [e2]
+-----------------------------------------
+
+Since many our detectors have multiple modules we cannot return
+a single value when reading from the Detector. Hostname, Ip and also
+for example exposure time can differ between modules. 
+
+Therefore we return Result<T> which is a thin wrapper around
+std::vector. 
+
+.. code-block:: cpp
+
+    sls::Result<int> res1{1, 1, 1};
+    std::cout << "res1: " << res1 << '\n';
+    res1.squash();
+    res1.squash(-1);
+
+
+
+Setting exposure time [e3]
+-----------------------------------------
+
+For setting times, like exposure time, period, delay etc. 
+we use std::chrono::duration. 
+
+Example 3 shows how to set and read exposure time as well
+as converting to floating point. 
+
+.. code-block:: cpp
+
+    #include "Detector.h"
+    #include <chrono>
+    ...
+    std::chrono::microseconds t0{500};
+    det.setExptime(t0);
+
+
+

docs/src/gendoc.cpp

@@ -1,7 +1,7 @@
-/** 
- * Utility program to generate input files for the command line 
+/**
+ * Utility program to generate input files for the command line
  * documentation. Uses the string returned from sls_detector_help cmd
- * 
+ *
  */
 #include <fstream>
 #include <iostream>
@@ -9,7 +9,6 @@
 #include <string>
 #include <vector>
 
-
 #include "CmdProxy.h"
 #include "Detector.h"
 #include "sls_detector_defs.h"
@@ -52,5 +51,4 @@ int main() {
         auto help = replace_all(tmp, "\n\t", "\n\t\t");
         fs << '\t' << cmd << usage << help << "\n";
     }
-
 }

docs/src/index.rst

@@ -6,12 +6,18 @@
 Welcome to slsDetectorPackage's documentation!
 ==============================================
 
+.. note :: 
+
+    This is the documentation for the latest development version of slsDetectorPackage
+    For documentation on current and previous releases visit the official page: https://www.psi.ch/en/detectors/documentation
+
 .. toctree::
     :maxdepth: 1
     :caption: Installation:
 
     installation
     dependencies
+    consuming
    
 .. toctree::
     :caption: C++ API
@@ -20,6 +26,7 @@ Welcome to slsDetectorPackage's documentation!
     detector
     result
     receiver
+    examples
 
 .. toctree::
     :caption: Python API

docs/src/installation.rst

@@ -1,5 +1,114 @@
 
+
+
+.. note :: 
+
+    The default branch of our git repository is developer. It contains the 
+    latest development version. It is expected to compile and work but 
+    features might be added or tweaked. In some cases the API might also change
+    without being communicated. If absolute stability of the API is needed please
+    use one of the release versions. 
+
+.. warning ::
+    
+    Before building from source make sure that you have the 
+    :doc:`dependencies <../dependencies>` installed. If installing using conda, conda will 
+    manage the dependencies.
+    
+
+
 Installation
 ==============================================
 
-get the source etc.
+Build from source using CMake
+---------------------------------
+
+Note that on some systems, for example RH7,  cmake v3+ is available under the cmake3 alias.
+It is also required to clone with the option --recursive to get the git submodules used
+in the package. 
+
+
+.. code-block:: bash
+
+    git clone --recursive https://github.com/slsdetectorgroup/slsDetectorPackage.git
+    mkdir build && cd build
+    cmake ../slsDetectorPackage -DCMAKE_INSTALL_PREFIX=/your/install/path
+    make -j12 #or whatever number of cores you are using to build
+    make install
+
+The easiest way to configure options is to use the ccmake utility. 
+
+.. code-block:: bash
+
+    #from the build directory
+    ccmake .
+
+
+Install binaries using conda
+--------------------------------
+
+Conda is not only useful to manage python environments but can also
+be used as a user space package manager. 
+
+We have three different packages available:
+
+ * **slsdetlib**, shared libraries and command line utilities 
+ * **slsdetgui**, GUI
+ * **slsdet**, Python bindings
+
+
+.. code-block:: bash
+
+    #Add channels for dependencies and our library
+    conda config --add channels conda-forge
+    conda config --add channels slsdetectorgroup
+    conda config --set channel_priority strict
+
+    #cerate an environment with our library, then activate
+    conda create -n myenv slsdetlib=2020.07.23.dev0
+    conda activate myenv
+
+    #ready to use
+    sls_detector_get exptime
+    etc ...
+
+
+.. code-block:: bash
+
+    #List available versions
+    conda search slsdet
+
+
+Build from source on old distributions
+-----------------------------------------
+
+If your linux distribution doesn't come with a C++11 compiler (gcc>4.8) then 
+it's possible to install a newer gcc using conda and build the slsDetectorPackage
+using this compiler
+
+.. code-block:: bash
+
+    #Create an environment with the dependencies
+    conda create -n myenv gxx_linux-64 cmake zmq
+    conda activate myenv
+    cmake ../slsDetectorPackage -DCMAKE_PREFIX_PATH=$CONDA_PREFIX
+    make -j12
+
+
+Build this documentation
+-------------------------------
+
+The documentation for the slsDetectorPackage is build using a combination 
+of Doxygen, Sphinx and Breathe. The easiest way to install the dependencies
+is to use conda 
+
+.. code-block:: bash
+
+    conda create -n myenv python sphinx sphinx_rtd_theme
+
+Then enable the option SLS_BUILD_DOCS to create the targets
+
+.. code-block:: bash
+
+    make docs # generate API docs and build Sphinx RST
+    make rst # rst only, saves time in case the API did not change

docs/src/pydetector.rst

@@ -1,9 +1,9 @@
 Detector
 =====================================================
 
-.. py:currentmodule:: sls_detector
+.. py:currentmodule:: slsdet
 
-.. autoclass:: ExperimentalDetector
+.. autoclass:: Detector
     :members:  
     :undoc-members:
     :show-inheritance:

docs/src/pyenums.rst

@@ -4,9 +4,55 @@ Enums
 These enums are defined in slsDetectorDefs in the C++ package and 
 exposed to Python through pybind11.
 
-.. py:currentmodule:: sls_detector
+.. py:currentmodule:: slsdet
 
 .. autoclass:: runStatus
-    :members:  
     :undoc-members:
-    :show-inheritance:
+
+.. autoclass:: detectorType
+    :undoc-members:
+
+.. autoclass:: frameDiscardPolicy
+    :undoc-members:
+
+.. autoclass:: fileFormat
+    :undoc-members:
+
+.. autoclass:: dimension
+    :undoc-members:
+
+.. autoclass:: externalSignalFlag
+    :undoc-members:
+
+.. autoclass:: timingMode
+    :undoc-members:
+
+.. autoclass:: dacIndex
+    :undoc-members:
+
+.. autoclass:: detectorSettings
+    :undoc-members:
+
+.. autoclass:: clockIndex
+    :undoc-members:
+
+.. autoclass:: speedLevel
+    :undoc-members:
+
+.. autoclass:: readoutMode
+    :undoc-members:
+
+.. autoclass:: masterFlags
+    :undoc-members:
+
+.. autoclass:: frameModeType
+    :undoc-members:
+
+.. autoclass:: detectorModeType
+    :undoc-members:
+
+.. autoclass:: burstMode
+    :undoc-members:
+
+.. autoclass:: timingSourceType
+    :undoc-members:

docs/src/pyexamples.rst

@@ -12,7 +12,7 @@ file writing etc.
 
 .. code-block:: python
  
-    from sls_detector import Eiger
+    from slsdet import Eiger
 
     d = Eiger()
     threshold = range(0, 2000, 200)
@@ -74,7 +74,7 @@ But lets start looking at the at the manual way:
 ::
 
     import time
-    from sls_detector import Eiger
+    from slsdet import Eiger
     d = Eiger()
 
     n = 10
@@ -114,7 +114,7 @@ hang around until the main process exits.
 
     import time
     from multiprocessing import Process
-    from sls_detector import Eiger
+    from slsdet import Eiger
 
     def acquire():
         """

docs/src/receiver.rst

@@ -1,6 +1,6 @@
 Receiver
 ==============================================
 
-.. doxygenclass:: slsReceiver
+.. doxygenclass:: Receiver
    :members:
 ..    :undoc-members:

examples/gotthard.config

@@ -12,7 +12,7 @@ hostname bchip007
 0:rx_udpip 129.129.202.98
 0:rx_hostname pc6898
 0:outdir /bigRAID/datadir_gotthard/rec_test_data
-0:vhighvoltage 120
+0:highvoltage 120
 master -1
 sync none
 outdir /bigRAID/datadir_gotthard/rec_test_data

examples/gotthard2_veto_file.txt

@@ -0,0 +1,129 @@
+#Gain index    ADU value (12 bit)
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655
+1               3655

examples/gotthard2_veto_photon.txt

@@ -1,132 +1,129 @@
-#G1 Energy #G2 Energy
-300	7000
-
-#G0 pedestal    G1 pedestal    G2 pedestal    G0 gain    G1 gain    G2 gain (for every channel) ADU
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
-100        100        100        10        1        0.1
+#G0 pedestal    G1 pedestal    G2 pedestal    G0 gain    G1 gain    G2 gain     #G1 Energy      #G2 Energy
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000
+100             100             100             10        1             0.1     300	            7000

examples/gotthard_II.config

@@ -0,0 +1,29 @@
+hostname strip3
+
+udp_srcip 10.1.1.184
+udp_dstip 10.1.1.107
+
+udp_dstport2 50084
+udp_srcip2 10.1.1.185
+udp_dstip2 10.1.1.107
+
+rx_hostname pc12365:1954
+#udp_dstmac 3c:fd:fe:d2:a4:25
+fpath  /tmp
+fname run
+fwrite 0
+
+bursts 10
+frames 2700
+burstperiod 100ms
+
+numinterfaces 2
+veto 1
+
+#fixing data looks
+# Sampling pipeline 1 clk
+reg 0x120 0x00000010
+clkphase 1 135 deg
+
+
+

examples/gotthard_two.config

@@ -6,12 +6,12 @@ hostname bchip074+bchip075+
 0:extsig:0 trigger_in_rising_edge
 0:rx_tcpport 1954
 0:rx_udpport 50001
-0:vhighvoltage 0
+0:highvoltage 0
 
 1:extsig:0 trigger_in_rising_edge
 1:rx_tcpport 1955
 1:rx_udpport 50002
-1:vhighvoltage 0
+1:highvoltage 0
 
 ##############################################################################
 #########
@@ -53,5 +53,5 @@ settings veryhighgain
 exptime 0.000005
 period 0.0001
 
-vhighvoltage 90
+highvoltage 90
 

examples/jctb_moench03_T1.config

@@ -1,4 +1,14 @@
-hostname bchip085+
+initialchecks 0
+#############################################
+### edit with hostname or IP address of your detector 
+############################################
+hostname bchip181+
+runclk 40
+adcclk 20
+dbitclk 40
+
+
+
 
 patword 0000 0000000000000000
 patword 0001 0000000000000000
@@ -408,84 +418,84 @@ patnloop1 0
 patloop2 0400 0400
 patnloop2 0
 patwait0 00aa
-patwaittime0 40000
+patwaittime0 10000
 patwait1 0400
 patwaittime1 0
 patwait2 0400
 patwaittime2 0
 
 
-####mcp2011
-#0:rx_udpip 10.1.1.102
-#0:detectorip 10.1.1.19
-#0:rx_udpport 32410
-####gui listening to 
-#zmqip 129.129.202.131
-#zmqport 30001
-####data streaming out of
-#rx_zmqip 10.1.2.103
-#rx_zmqport 30003
-#0:rx_hostname mpc2011
+#0:rx_tcpport 1977
 
-####mx-test-1
-0:rx_udpip 10.1.1.100
-0:detectorip 10.1.1.19
-0:rx_udpport 32410
-####gui listening to (on receiver pc)
-zmqip 129.129.202.92
-zmqport 30001
-####data streaming out of
-rx_zmqip 10.1.1.100
-rx_zmqport 30003
-0:rx_hostname pcmoench01
+#############################################
+### edit with 10 Gbs IP of your server
+############################################
+0:udp_dstip 10.1.1.102
+#0:udp_dstip 129.129.202.136
+#############################################
+### edit with any number in the subnet of your server (first 3 numbers as above)
+############################################
+0:udp_srcip 10.1.1.19
+#0:udp_srcip 129.129.202.13
+
+0:udp_dstport 33410
+#############################################
+### edit with 10 Gbs IP of your server
+############################################
+#zmqip 129.129.202.110
+#rx_zmqip 10.1.1.102
+#rx_zmqport 30001
+#############################################
+### edit with 1 Gbs IP of PC where you will run the GUI
+############################################
+#zmqip 129.129.202.110
+#zmqport 50001
 
 
+#############################################
+### edit with hostname or 1Gbs IP address of your server
+############################################
+rx_hostname mpc2011
 
+tengiga 1
 
-
-
-
-
-
-
-
-#turn on datastream from commandline
 rx_datastream 1
-
-r_readfreq 1
-
-#0:configuremac -1
-rx_datastream 1
-
-r_readfreq 1
+rx_readfreq 1
 
 
-dac:6 800
-dac:0 1300
-dac:4 1428
-dac:1 1000
-dac:7 900
-dac:3 680
-dac:2 1400
-dac:5 1200
+dac 6 800
+dac 0 1300
+dac 4 1428
+dac 1 1000
+dac 7 900
+dac 3 680
+dac 2 1400
+dac 5 1200
 adcinvert 4a342593
-samples 5000
-adcphase 90
-adcpipeline 15
+#0xb5cbda6c
+asamples 5000
+dsamples 0
+adcphase 30 deg
+adcpipeline 14
 adcreg 14 40
-powerchip 1
-vhighvoltage 90
-period 0.005
 
 
+frames 1000
+period 0.001
+#############################################
+### edit with directory you want to write to
+############################################
+fpath /tmp/
+fwrite 0
 
+romode analog
+#rx_jsonaddheader frameMode
+rx_jsonpara frameMode newpedestal
+#rx_jsonaddheader detectorMode
+rx_jsonpara detectorMode analog
+#flags newpedestal
+#flags analog
 
-
-
-frames 100
-period 0.1
-outdir /scratch/
-enablefwrite 0
-
-
-
+reg 0x5e 0x00010000
+#powerchip 1
+highvoltage 90

examples/jungfrau.config

@@ -6,7 +6,7 @@ hostname localhost
 rx_hostname localhost
 
 #powerchip 1
-#vhighvoltage 200
+#highvoltage 200
 
 #extsig:0 trigger_in_rising_edge
 #timing trigger

examples/jungfrau_two.config

@@ -17,7 +17,7 @@ hostname bchip048+bchip052+
 rx_hostname pcmoench01
 
 powerchip 1
-vhighvoltage 200
+highvoltage 200
 #extsig:0 trigger_in_rising_edge
 #timing trigger
 

examples/moench03_T1.config

@@ -0,0 +1,63 @@
+initialchecks 0
+#############################################
+### edit with hostname or IP address of your detector 
+############################################
+hostname bchip181+
+
+#############################################
+### edit with hostname or 1Gbs IP address of your server
+############################################
+rx_hostname mpc2011
+
+rx_tcpport 1954
+#############################################
+### edit with 10 Gbs IP of your server
+############################################
+udp_dstip 10.1.1.102
+#############################################
+### edit with any number in the subnet of your server (first 3 numbers as above)
+############################################
+udp_srcip 10.1.1.19
+udp_dstport 32411
+
+#############################################
+### edit with 10 Gbs IP of your server
+############################################
+rx_zmqip 10.1.1.102
+rx_zmqport 50003
+#############################################
+### edit with 1 Gbs IP of PC where you will run the GUI
+############################################
+zmqip 129.129.202.136
+zmqport 50001
+
+
+
+
+tengiga 1
+rx_datastream 1
+
+
+
+frames 100000
+period 0.0006
+#############################################
+### edit with directory you want to write to
+############################################
+fpath /mnt/moench_data/scratch/
+fwrite 0
+rx_datastream 1
+
+rx_jsonpara frameMode frame
+rx_jsonpara detectorMode counting
+rx_discardpolicy discardpartial
+
+
+adcpipeline 15
+
+powerchip 1
+highvoltage 90
+
+#adcreg 0x14 0x40
+
+

examples/two_gotthard.config

@@ -19,7 +19,7 @@ hostname bchip007+bchip009+
 0:rx_udpip 10.1.1.1
 0:rx_hostname 129.129.202.134 
 0:outdir /data/speedt
-0:vhighvoltage 120
+0:highvoltage 120
 
 
 #1:hostname bchip009
@@ -37,7 +37,7 @@ hostname bchip007+bchip009+
 1:rx_udpip 10.1.2.1
 1:rx_hostname 129.129.202.134 
 1:outdir /data/speedt
-1:vhighvoltage 120
+1:highvoltage 120
 
 
 master -1

integrationTests/test-eigerIntegration.cpp

@@ -1,12 +1,12 @@
+#include "DetectorImpl.h"
 #include "catch.hpp"
-#include "multiSlsDetector.h"
 #include "string_utils.h"
 #include "tests/globals.h"
 #include <iostream>
 
 class MultiDetectorFixture {
   protected:
-    multiSlsDetector d;
+    DetectorImpl d;
 
   public:
     MultiDetectorFixture() : d(0, true, true) {

integrationTests/test-integrationDectector.cpp

@@ -2,9 +2,9 @@
 #include "catch.hpp"
 
 #include "ClientSocket.h"
+#include "DetectorImpl.h"
+#include "Module.h"
 #include "logger.h"
-#include "multiSlsDetector.h"
-#include "slsDetector.h"
 #include "sls_detector_defs.h"
 
 #include "Timer.h"
@@ -23,10 +23,10 @@
 // extern dt type;
 
 TEST_CASE("Single detector no receiver", "[.integration][.single]") {
-    auto t = slsDetector::getTypeFromDetector(test::hostname);
+    auto t = Module::getTypeFromDetector(test::hostname);
     CHECK(t == test::type);
 
-    slsDetector d(t);
+    Module d(t);
     CHECK(d.getDetectorTypeAsEnum() == t);
     CHECK(d.getDetectorTypeAsString() == test::detector_type);
 
@@ -51,7 +51,7 @@ TEST_CASE("Set control port then create a new object with this control port",
     int new_cport = 1993;
     int new_sport = 2000;
     {
-        slsDetector d(test::type);
+        Module d(test::type);
         d.setHostname(test::hostname);
         CHECK(d.getControlPort() == old_cport);
         d.setControlPort(new_cport);
@@ -60,7 +60,7 @@ TEST_CASE("Set control port then create a new object with this control port",
         d.freeSharedMemory();
     }
     {
-        slsDetector d(test::type);
+        Module d(test::type);
         d.setHostname(test::hostname);
         d.setControlPort(new_cport);
         d.setStopPort(new_sport);
@@ -73,24 +73,23 @@ TEST_CASE("Set control port then create a new object with this control port",
         d.freeSharedMemory();
     }
 
-    slsDetector d(test::type);
+    Module d(test::type);
     d.setHostname(test::hostname);
     CHECK(d.getStopPort() == DEFAULT_PORTNO + 1);
     d.freeSharedMemory();
 }
 
-
 TEST_CASE("single EIGER detector no receiver basic set and get",
           "[.integration][eiger]") {
     // TODO! this test should take command line arguments for config
     SingleDetectorConfig c;
 
     // Read type by connecting to the detector
-    auto type = slsDetector::getTypeFromDetector(c.hostname);
+    auto type = Module::getTypeFromDetector(c.hostname);
     CHECK(type == c.type_enum);
 
-    // Create slsDetector of said type and set hostname and detector online
-    slsDetector d(type);
+    // Create Module of said type and set hostname and detector online
+    Module d(type);
     CHECK(d.getDetectorTypeAsEnum() == type);
     CHECK(d.getDetectorTypeAsString() == c.type_string);
 
@@ -130,10 +129,8 @@ TEST_CASE("single EIGER detector no receiver basic set and get",
     d.freeSharedMemory();
 }
 
-
-
 TEST_CASE("Locking mechanism and last ip", "[.integration][.single]") {
-    slsDetector d(test::type);
+    Module d(test::type);
     d.setHostname(test::hostname);
 
     // Check that detector server is unlocked then lock
@@ -154,13 +151,12 @@ TEST_CASE("Locking mechanism and last ip", "[.integration][.single]") {
     d.freeSharedMemory();
 }
 
-TEST_CASE("Set settings", "[.integration][.single]"){
-    slsDetector d(test::type);
+TEST_CASE("Set settings", "[.integration][.single]") {
+    Module d(test::type);
     d.setHostname(test::hostname);
     CHECK(d.setSettings(defs::STANDARD) == defs::STANDARD);
 }
 
-
 TEST_CASE("Timer functions", "[.integration][cli]") {
     // FRAME_NUMBER, /**< number of real time frames: total number of
     // acquisitions is number or frames*number of triggers */ ACQUISITION_TIME,
@@ -185,7 +181,7 @@ TEST_CASE("Timer functions", "[.integration][cli]") {
     // MEASURED_SUBPERIOD,	/**< measured subperiod */
     // MAX_TIMERS
 
-    slsDetector d(test::type);
+    Module d(test::type);
     d.setHostname(test::hostname);
 
     // Number of frames
@@ -204,8 +200,7 @@ TEST_CASE("Timer functions", "[.integration][cli]") {
     if (test::type != dt::EIGER) {
         auto delay = 10000;
         d.setDelayAfterTrigger(delay);
-        CHECK(d.getDelayAfterTrigger() ==
-              delay);
+        CHECK(d.getDelayAfterTrigger() == delay);
     }
 
     auto triggers = 2;
@@ -218,16 +213,15 @@ TEST_CASE("Timer functions", "[.integration][cli]") {
         CHECK(d.getSubExptime() == subtime);
     }
     // for (int i =0; i!=frames; ++i)
-        d.startAndReadAll();
+    d.startAndReadAll();
 
     d.freeSharedMemory();
-
 }
 
 // TEST_CASE("Aquire", "[.integration][eiger]"){
 //     SingleDetectorConfig c;
-//     auto type = slsDetector::getTypeFromDetector(c.hostname);
-//     slsDetector d(type);
+//     auto type = Module::getTypeFromDetector(c.hostname);
+//     Module d(type);
 //     d.setHostname(c.hostname);
 
 //     auto period = 1000000000;
@@ -252,7 +246,7 @@ TEST_CASE(
     int ratecorr = 125;
 
     // pick up multi detector from shm id 0
-    multiSlsDetector m(0);
+    DetectorImpl m(0);
 
     // ensure eiger detector type, hostname and online
     REQUIRE(m.getDetectorTypeAsEnum() == c.type_enum);
@@ -302,7 +296,7 @@ TEST_CASE("Chiptestboard Loading Patterns", "[.ctbintegration]") {
     SingleDetectorConfig c;
 
     // pick up multi detector from shm id 0
-    multiSlsDetector m(0);
+    DetectorImpl m(0);
 
     // ensure ctb detector type, hostname and online
     REQUIRE(m.getDetectorTypeAsEnum() == c.type_enum);
@@ -382,12 +376,12 @@ TEST_CASE("Chiptestboard Loading Patterns", "[.ctbintegration]") {
     }
 }
 
-
-TEST_CASE("Chiptestboard Dbit offset, list, sampling, advinvert", "[.ctbintegration][dbit]") {
+TEST_CASE("Chiptestboard Dbit offset, list, sampling, advinvert",
+          "[.ctbintegration][dbit]") {
     SingleDetectorConfig c;
 
     // pick up multi detector from shm id 0
-    multiSlsDetector m(0);
+    DetectorImpl m(0);
 
     // ensure ctb detector type, hostname and online
     REQUIRE(m.getDetectorTypeAsEnum() == c.type_enum);
@@ -403,27 +397,27 @@ TEST_CASE("Chiptestboard Dbit offset, list, sampling, advinvert", "[.ctbintegrat
 
     // dbit list
 
-    std::vector <int> list = m.getReceiverDbitList();
+    std::vector<int> list = m.getReceiverDbitList();
     list.clear();
     for (int i = 0; i < 10; ++i)
         list.push_back(i);
     m.setReceiverDbitList(list);
-    
+
     CHECK(m.getReceiverDbitList().size() == 10);
 
     list.push_back(64);
     CHECK_THROWS_AS(m.setReceiverDbitList(list), sls::RuntimeError);
-    CHECK_THROWS_WITH(m.setReceiverDbitList(list), 
-        Catch::Matchers::Contains("be between 0 and 63"));
+    CHECK_THROWS_WITH(m.setReceiverDbitList(list),
+                      Catch::Matchers::Contains("be between 0 and 63"));
 
     list.clear();
     for (int i = 0; i < 65; ++i)
         list.push_back(i);
     CHECK(list.size() == 65);
-    CHECK_THROWS_WITH(m.setReceiverDbitList(list),  
-        Catch::Matchers::Contains("be greater than 64"));
+    CHECK_THROWS_WITH(m.setReceiverDbitList(list),
+                      Catch::Matchers::Contains("be greater than 64"));
 
-    list.clear(); 
+    list.clear();
     m.setReceiverDbitList(list);
     CHECK(m.getReceiverDbitList().empty());
 
@@ -441,8 +435,8 @@ TEST_CASE("Chiptestboard Dbit offset, list, sampling, advinvert", "[.ctbintegrat
     m.setExternalSamplingSource(62);
     CHECK(m.getExternalSamplingSource() == 62);
     CHECK_THROWS_WITH(m.setExternalSamplingSource(64),
-         Catch::Matchers::Contains("be 0-63"));
-    CHECK(m.getExternalSamplingSource() == 62); 
+                      Catch::Matchers::Contains("be 0-63"));
+    CHECK(m.getExternalSamplingSource() == 62);
     m.setExternalSampling(1);
     CHECK(m.getExternalSampling() == 1);
     m.setExternalSampling(0);
@@ -450,20 +444,23 @@ TEST_CASE("Chiptestboard Dbit offset, list, sampling, advinvert", "[.ctbintegrat
     m.setExternalSampling(1);
     CHECK(m.getExternalSampling() == 1);
     CHECK(m.readRegister(0x7b) == 0x1003E);
-    
 }
 
-TEST_CASE("Eiger or Jungfrau startingfnum", "[.eigerintegration][.jungfrauintegration][startingfnum]") {
+TEST_CASE("Eiger or Jungfrau startingfnum",
+          "[.eigerintegration][.jungfrauintegration][startingfnum]") {
     SingleDetectorConfig c;
 
     // pick up multi detector from shm id 0
-    multiSlsDetector m(0);
+    DetectorImpl m(0);
 
     // ensure ctb detector type, hostname and online
-    REQUIRE(((m.getDetectorTypeAsEnum() == slsDetectorDefs::detectorType::EIGER) || (m.getDetectorTypeAsEnum() == slsDetectorDefs::detectorType::JUNGFRAU)));
+    REQUIRE(
+        ((m.getDetectorTypeAsEnum() == slsDetectorDefs::detectorType::EIGER) ||
+         (m.getDetectorTypeAsEnum() ==
+          slsDetectorDefs::detectorType::JUNGFRAU)));
     REQUIRE(m.getHostname() == c.hostname);
 
-     CHECK(m.setNumberOfFrames(1) == 1);
+    CHECK(m.setNumberOfFrames(1) == 1);
 
     // starting fnum
     uint64_t val = 8;
@@ -495,10 +492,11 @@ TEST_CASE("Eiger readnlines", "[.eigerintegration][readnlines]") {
     SingleDetectorConfig c;
 
     // pick up multi detector from shm id 0
-    multiSlsDetector m(0);
+    DetectorImpl m(0);
 
     // ensure detector type, hostname
-    REQUIRE((m.getDetectorTypeAsEnum() == slsDetectorDefs::detectorType::EIGER));
+    REQUIRE(
+        (m.getDetectorTypeAsEnum() == slsDetectorDefs::detectorType::EIGER));
     REQUIRE(m.getHostname() == c.hostname);
 
     m.setDynamicRange(16);
@@ -507,7 +505,7 @@ TEST_CASE("Eiger readnlines", "[.eigerintegration][readnlines]") {
     CHECK(m.getReadNLines() == 256);
     m.setReadNLines(1);
     CHECK(m.getReadNLines() == 1);
-        
+
     m.setDynamicRange(8);
     m.setReadNLines(256);
     CHECK(m.getReadNLines() == 256);

integrationTests/test-integrationMulti.cpp

@@ -1,5 +1,5 @@
+#include "DetectorImpl.h"
 #include "catch.hpp"
-#include "multiSlsDetector.h"
 #include "string_utils.h"
 #include "tests/globals.h"
 #include <iostream>
@@ -9,7 +9,7 @@ using namespace Catch::literals;
 TEST_CASE("Initialize a multi detector", "[.integration][.multi]") {
     auto hostnames = sls::split(test::hostname, '+');
 
-    multiSlsDetector d(0, true, true);
+    DetectorImpl d(0, true, true);
     d.setHostname(test::hostname.c_str());
 
     CHECK(d.getHostname() == test::hostname);
@@ -24,11 +24,9 @@ TEST_CASE("Initialize a multi detector", "[.integration][.multi]") {
     d.freeSharedMemory();
 }
 
-
-
 TEST_CASE("Set and read timers", "[.integration][.multi]") {
 
-    multiSlsDetector d(0, true, true);
+    DetectorImpl d(0, true, true);
     d.setHostname(test::hostname.c_str());
 
     // FRAME_NUMBER
@@ -57,7 +55,6 @@ TEST_CASE("Set and read timers", "[.integration][.multi]") {
     // PROGRESS, /**< fraction of measurement elapsed - only get! */
     // MEASUREMENTS_NUMBER,
 
-
     // FRAMES_FROM_START,
     // FRAMES_FROM_START_PG,
     // SAMPLES,
@@ -78,7 +75,6 @@ TEST_CASE("Set and read timers", "[.integration][.multi]") {
         CHECK(d.setSubFrameExposureDeadTime(-1) == Approx(subframe_deadtime));
     }
 
-    
     if (test::type == dt::EIGER) {
         // 32bit is needed for subframe exposure
         d.setDynamicRange(32);

manual/manual-client/Eiger_short.tex

@@ -99,7 +99,7 @@ If one desires to set the zmqport manually, he offset has to be taken into accou
 
 {\tt{slsMultiReceiver}} uses two or more receivers in one single terminal: {\tt{./slsMultiReceiver startTCPPort numReceivers withCallback}}, where startTCPPort assumes the other ports are consecutively increased.
 
-The command {\tt{r\_framesperfile}} sets the number of frames written in the same file. By default now it is 10000. It can be changes. It needs to be lowered particularly if one wants to parallelize the following conversion of the files. 
+The command {\tt{r\_framesperfile}} (\tt{\textcolor{red}{rx\_framesperfile}}) sets the number of frames written in the same file. By default now it is 10000. It can be changes. It needs to be lowered particularly if one wants to parallelize the following conversion of the files. 
 
 
 \subsection{Mandatory setup - Client}
@@ -122,7 +122,23 @@ To do that:
 sls_detector_put 0-config mydetector.config
 \end{verbatim}
 
-In the config file, if client, receiver and detector are using \textbf{1GbE} the following lines are mandatory (see slsDetectorsPackage/examples/eiger\_1Gb.config):
+In the config file, if client, receiver and detector are using \textbf{1GbE} the following lines are mandatory (see slsDetectorsPackage/examples/eiger\_1Gb.config). It has been adapted to the the new 5.0 major release change:
+\begin{verbatim}
+detsize 1024 512 #detector geometry, long side of the module first
+hostname beb059+beb058+ #1Gb detector hostname for controls
+#1Gb receiver pc hostname to be inserted immediately and tcp\_ports to be stated immediately
+rx_hostname x12sa-vcons:1991+pc1875:1992+
+0:udp_dstport 50011 #udp port first quadrant, first halfmodule         
+0:udp_dstport2 50012 #udp port second quadrant, first halfmodule       
+1:udp_dstport 50013 #udp port first quadrant, second halfmodule       
+1:udp_dstport2 50014 #udp port second quadrant, second halfmodule      
+0:udp_srcip 129.129.202.237
+0:udp_dstip auto
+1:udp_srcip 129.129.202.236
+1:udp_dstip auto
+fpath /sls/X12SA/data/x12saop/Data10/Eiger0.5M
+\end{verbatim}
+In the old 3.x and 4.x release it was: 
 \begin{verbatim}
 detsizechan 1024 512 #detector geometry, long side of the module first
 hostname beb059+beb058+ #1Gb detector hostname for controls
@@ -172,23 +188,25 @@ configuremac 0
 rx_udpmac xx:xx:...
 \end{verbatim}
 
+Now we will give general communication commands. Commands with a diffent name in the \textcolor{red}{5.x} realease will be highlighted in \textcolor{red}{red}.
+
 One can configure all the detector settings in a parameter file {\tt{setup.det}}, which is loaded by doing:
 \begin{verbatim}
 sls_detector_put 0-parameters setup.det
 \end{verbatim}
+Note that the parameter file for any realease before 4.1.1 has not the possibility to understand parameters to be set differently for different half modules, i.e.  {\tt{0:txndelay\_left xxxxx},\tt{1:txndelay\_left yyyyy}}. 
 
-In the case of \E, the proper bias voltage of the sensor has to be setup, i.e. the {\tt{setup.det}} file needs to contain the line {\tt{vhighvoltage 150}}. Other detector functionality, which are rarely changed can be setup here. 
+In the case of \E, the proper bias voltage of the sensor has to be setup, i.e. the {\tt{setup.det}} file needs to contain the line {\tt{highvoltage 150}}. Other detector functionality, which are rarely changed can be setup here. 
 Other important settings that are configured in the {\tt{setup.det}} file are:
 \begin{itemize}
 \item {\tt{tengiga 0/1}}, which sets whether the detector is enabled to send data through the 1~or the 10~Gb Ethernet.
-\item {\tt{flags parallel/nonparallel}}, which sets whether the detector is set in parallel acquisition and readout or in sequential mode. This changes the readout time of the chip and affects the frame rate capability (faster is {\tt{parallel}}, with higher noise but needed when the frame rate is $>2$~kHz. 
+\item {\tt{flags parallel/nonparallel}} or {\tt{\textcolor{red}{parallel 1/0}}}, which sets whether the detector is set in parallel acquisition and readout or in sequential mode. This changes the readout time of the chip and affects the frame rate capability (faster is {\tt{parallel}}).
 \item {\tt{dr 32/16/8/4}} sets the detector in autosumming mode (32 bit counter or not autosumming, 12 bit out of the chip). This is strictly connected to what is required for the readout clock of chip. See next point.
-\item {\tt{clkdivider 0/1/2}}. Changes the readout clock: 200, 100, 50~MHz (also referred to as full, half, quarter speed). Note that autosumming mode ({\tt{dr 32}} only works at {clkdivider 2}=quarter speed). By selecting Refer to readout timing specifications in~section\ref{timing} for how to set the detector. 
+\item {\tt{clkdivider 0/1/2}} or {\tt{\textcolor{red}{speed full\_speed/half\_speed/quart\_speed}}}. Changes the readout clock: 200, 100, 50~MHz (also referred to as full, half, quarter speed). Note that autosumming mode ({\tt{dr 32}} only works at \tt{clkdivider 2}=\tt{quart\_speed}). By selecting Refer to readout timing specifications in~section\ref{timing} for how to set the detector. 
 \item {\tt{flags continuous/storeinram}}. Allows to take frame continuously or storing them on memory. Users should use the {\tt{continuous}} flags. Enabling the {\tt{stroreinram}} flag makes the data to be sent out all at the end of the acquisition. Refer to readout timing specifications in section~\ref{timing} for how to set the detector. Examples will be given in section~\ref{}.
 \end{itemize}
 
-One should notice that, by default, by choosing the option {\tt{dr 32}}, then the software automatically sets the detector to  {\tt{clkdivider 2}}. By choosing the option {\tt{dr 16}}, the software automatically sets the detector to  {\tt{clkdivider 1}}. One needs to choose {\tt{clkdivider 0}} after setting the {\tt{dr 16}} option to have the fastest frame rate. 
-We would recommend expert users (beamline people) to write their parameters file for the users. 
+One should notice that, by default, by choosing the option {\tt{dr 32}}, then the software automatically sets the detector to  {\tt{clkdivider 2}} ({\tt{\textcolor{red}{quart\_speed}}}). By choosing the option {\tt{dr 16}}, the software automatically sets the detector to  {\tt{clkdivider 1}} ({\tt{\textcolor{red}{speed quart\_speed}}}). From release 5.x, 
 
 \section{API versioning} \label{api}
 The eigerDetectorServer running on the boards has a versioning API scheme that will make it crash if used with a wrong firmware.
@@ -209,10 +227,18 @@ Killing and starting the server on the boards allows you to check the firmware v
 
 \section{Setting up the threshold}
 \begin{verbatim}
+sls_detector_put 0-settingsdir /path
 sls_detector_put 0-trimen N xxxx yyyy zzzz
 sls_detector_put 0-settings standard 
 sls_detector_put 0-threshold energy_in_eV standard
 \end{verbatim}
+or in \textcolor{red}{5.x}:
+\begin{verbatim}
+sls_detector_put 0-settingspath /path}
+sls_detector_put 0-trimen N xxxx yyyy zzzz}
+sls_detector_put 0-threshold energy_in_eV standard
+\end{verbatim}
+
 The first line requires to specify how many ({\tt{N}}) and at which energies in eV {\{tt{xxxx}}, {\tt{yyyy}}, {\tt{zzzz}} and so on) trimmed files were generated (to allow for an interpolation). This line should normally be included into the {\tt{mydetector.config}} file and should be set for you by one of the detector group.
 NORMALLY, in this new calibration scheme, only {\tt{settings standard}} will be provided to you, unless specific cases to be discussed.
 The threshold at 6000 eV , for example would be set as:{\tt{sls\_detector\_put 0-threshold 6000 standard}}.
@@ -266,12 +292,13 @@ sls_detector_get receiver
 
 There is a more complex way of performing an acquisition, that is useful for debugging and in case one wants a non blocking behavior: 
 
-You can then reset to zero the number of frames caught, then  start the receiver and the detector:
+You can then reset to zero the number of frames caught (in releases<5.0), then  start the receiver and the detector:
 \begin{enumerate}
 \item {\tt{sls\_detector\_put 0-resetframescaught 0}} 
 \item {\tt{sls\_detector\_put 0-receiver start}} 
 \item {\tt{sls\_detector\_put 0-status start}} 
 \end{enumerate}
+In release \textcolor{red}{5.0} it is not needed to reset the frames caughts.
 
 You can poll the detector status using:
 \begin{verbatim}
@@ -346,8 +373,11 @@ col                        : 257 pixels
 \end{verbatim}
 
 \section{Readout timing- maximum frame rate}\label{timing}
-IMPORTANT: to have faster readout and smaller dead time, one can configure {\tt{clkdivider}}, i.e. the speed at which the data are read, i.e. 200/100/50~MHz for {\tt{clkdivider 0/1/2}} and the dead time between frames through {\tt{flags parallel}}, i.e. acquire and read at the same time or acquire and then read out.
-The configuration of this timing variables allows to achieve different frame rates. NOTE THAT IN EIGER, WHATEVER YOU DO, THE FRAME RATE LIMITATIONS COME FROM THE NETWORK BOTTLENECK AS THE HARDWARE GOES FASTER THAN THE DATA OUT.
+IMPORTANT: to have faster readout and smaller dead time, one can configure {\tt{clkdivider}}, i.e. the {\tt{textcolor}{red}{speed} at which the data are read, i.e. 200/100/50~MHz for {\tt{clkdivider 0/1/2}} ({\tt{
+\textcolor{red}{speed full\_speed/half\_speed/quart\_speed}}) and the dead time between frames through {\tt{flags parallel}} or {\tt{\textcolor{red}{parallel 1}}}, i.e. acquire and read at the same time or acquire and then read out.
+The configuration of this timing variables allows to achieve different frame rates. NOTE THAT IN EIGER, WHATEVER YOU DO, THE FRAME RATE LIMITATIONS COME FROM THE NETWORK BOTTLENECK AS THE HARDWARE GOES FASTER THAN THE DATA OUT. WE recconmmend using the detector in \tt{dr 4/8/16}, \tt{\textcolor{red}{speed full\_speed}}, \tt{parallel 1} or \tt{dr 32}, \tt{\textcolor{red}{speed quart\_speed}}, \tt{parallel 1. All those options are now the defaults options starting from version 5.x.
+
+
 
 In the case of REAL CONTINUOUS readout, i.e. continuous acquire and readout from the boards (independent on how the chip is set), the continuous frame rates are listed in table~\ref{tcont}. The time to send out the frame out of the board 
 \begin{table} 
@@ -359,16 +389,16 @@ In the case of REAL CONTINUOUS readout, i.e. continuous acquire and readout from
 \hline 
 1 &  32 &  \textbf{128} & 7820 & \\
 \hline 
-10 & 4 & \textbf{10240} & 98 & 105/128\\
+10 & 4 & \textbf{7813} & 98 & 105/128\\
 \hline 
-10 & 8 & \textbf{5120} & 196 & 210/250\\
+10 & 8 & \textbf{4000} & 196 & 210/250\\
 \hline
-10 & 16 & \textbf{2560} & 391 & 420/490\\  
+10 & 16 & \textbf{2000} & 391 & 420/490\\  
 \hline 
-10 & 32 & \textbf{1280} & 782 & 840/977\\  
+10 & 32 & \textbf{1023} & 782 & 840/977\\  
 \hline 
 \end{tabular}
-\caption{Frame rate limits for the CONTINUOS streaming out of images, i.e. the data rate out is just below 1Gb/s or 10Gb/s. 1280~Hz for 32-bit, 10GbE is obtained from the 10GbE limitation. The maximum achievable frame rate is 977~Hz.} 
+\caption{Frame rate limits for the CONTINUOS streaming out of images, i.e. the data rate out is just below 1Gb/s or 10Gb/s. 1023~Hz for 32-bit, 10GbE is obtained from the 10GbE limitation. The maximum achievable frame rate is 977~Hz.} 
 \label{tcont}\end{table}
  Note that in the {\tt{continuous}} flag mode, some buffering is still done on the memories, so a higher frame rate than the proper real continuous one can be achieved. Still, this extra buffering is possible till the memories are not saturated. The number of images that can be stored on the DDR2 on board memories are listed in table~\ref{timgs}.
 \begin{table}
@@ -383,11 +413,11 @@ dynamic range & images\\
 16 & 7600\\
 \hline
 \end{tabular}
-\caption{Amount of images that can be stored on board. As while we store them, we start to send them out, the effective number of images could be larger than this, but it will depend on the network setup (how fats you stream out images).}
+\caption{Amount of images that can be stored on board. As while we store them, we start to send them out, the effective number of images could be larger than this, but it will depend on the network setup (how fast you stream out images).}
 \label{timgs}
 \end{table}
 
-The maximum frame rate achievable with 10~GbE, {\tt{dr 16}}, {\tt{flags continuous}}, {\tt{flags parallel}},{\tt{clkdivider 0}}, \textbf{6.1~kHz}. This is currently limited by the connection between the Front End Board and the Backend board. We expect the 32 bit mode limit, internally, to be \textbf{2~kHz} ({\tt{clkdivider 2}}).
+The maximum frame rate achievable with 10~GbE, {\tt{dr 16}}, {\tt{flags continuous}}, {\tt{flags parallel}} ({\tt{\textcolor{red}{parallel 1}}}),{\tt{clkdivider 0}} ({\tt{\textcolor{red}{speed full\_speed}}}), \textbf{6.1~kHz}. This is currently limited by the connection between the Front End Board and the Backend board. We expect the 32 bit mode limit, internally, to be \textbf{2~kHz} ({\tt{clkdivider 2}}).
  In dynamic range {\tt{dr 8}} the frame rate is \textbf{11~kHz} and for{\tt{dr 4}} is \textbf{22~kHz}. For 4 and 8 bit mode the frame rate are directly limited by the speed of the detector chip and not by the readout boards.    
 
 \subsection{Minimum time between frames and Maximum frame rate}
@@ -458,6 +488,23 @@ where the 'minimum time between frames' and the minimum period will be discussed
 
 \textbf{From software version 4.0.0, there is a very useful function {\tt{sls\_detector\_get measuredperiod}} which return the measured period AFTER the acquisition. This is important to check that the settings to obtain the targeted frame rate was correct.} 
 
+In release \textcolor{red}{5.0} in 4-bit modes one can set a sort of ROI in the detector such to read half of the module (the central part) or a quarter of it with almost double or four times the frame rate. By default the \tt{\textcolor{red}{readnlines}} is set to \tt{256} meaning the whole chip. With \tt{\textcolor{red}{readnlines 128}} or \tt{\textcolor{red}{readnlines 64}} one sets to read half/quarter rows from the chip. In table~\ref{table:hfrpartial} the maximum frame rates, exposure time and period for the partial readout.\\
+
+
+\begin{tabular}{|c|c|c|c|c|c|c|}
+\hline
+ readnlines & \# pixels & Active area (cm$^2$) & Max frame rate (kHz) & Period ($\mu$s) & Dead time ($\mu$s) & \# buffered images\\
+\hline
+256 &1024 $\times$ 512 & 8 $\times$ 3.8 & 22.7 & 44.0 &4.1 & 30k\\
+\hline
+128 &1024 $\times$ 256 & 8 $\times$ 1.9 & 42.1 & 23.7 &4.2 & 60k\\
+\hline
+64 & 1024 $\times$ 128 & 8 $\times$ 0.95 & 73.5 & 13.6 &4.2 & 120k\\
+\hline
+\end{tabular}
+\label{table:hfrpartial}
+
+
 \textbf{If you run too fast, the detector could become noisier (see problem shooting), it is important to match the detector settings to your frame rate. This can be done having more parameters files and load the one suitable with your experiment.} We experienced that with low energy settings could not reach 6~kHz and no noise.
 In 16 bit mode, it could make sense, in case of noise and low threshold to either reduce the frame rate:
 \begin{equation} 
@@ -578,10 +625,10 @@ The number of subframes composing a single 32bit acquisition can be calculated a
 \end{equation}
 This also means that {\tt{exptime}}$<${\tt{subexptime}} will be rounded to{\tt{subexptime}}. If you want shorter acquisitions, either reduce the {\tt{subexptime}} or switch two 16-bit mode (you can always sum offline if needed).   
 
-From release 4.0.0, an extra {\tt{flag overflow/nooverflow}} is added, with {\tt{nooverflow}} default:
+From release 4.0.0, an extra {\tt{flag overflow/nooverflow}} is added (\tt{\textcolor{red}{overflow 0/1}}), with {\tt{nooverflow}} (\tt{\textcolor{red}{overflow 0}}) default:
 \begin{itemize}
-\item {\tt{nooverflow}}: the internal 12-bit result is summed, even if there was saturation of the 12-bit counter (4095) in any of the subframes. Note that if there is saturation for every subframe, you might get as a result a value of the counter equal to (4095$\times$~number~of~subframes), which you need to correctly identify. On the other hand if the saturation occurred only one time, you will get something "close'' to the real number.
-\item {\tt{overflow}}: In this case, even if a pixel saturate only 1 time in a subframe, you will be returned as a value of the counter for that pixel: $2^{32}-1$, i.e. 4294967295.  
+\item {\tt{nooverflow}} (\tt{\textcolor{red}{overflow 0}}): the internal 12-bit result is summed, even if there was saturation of the 12-bit counter (4095) in any of the subframes. Note that if there is saturation for every subframe, you might get as a result a value of the counter equal to (4095$\times$~number~of~subframes), which you need to correctly identify. On the other hand if the saturation occurred only one time, you will get something "close'' to the real number.
+\item {\tt{overflow}} (\tt{\textcolor{red}{overflow 1}})): In this case, even if a pixel saturate only 1 time in a subframe, you will be returned as a value of the counter for that pixel: $2^{32}-1$, i.e. 4294967295.  
 \end{itemize}
 
 The UDP header will contain, after you receive the data, the effective number of subframe per image (see section~\ref{UDP}) as  "SubFrame Num or Exp Time", i.e. the number of subframes recorded  (32 bit eiger).
@@ -609,18 +656,19 @@ The detector can be setup such to receive external triggers. Connect a LEMO sign
 \begin{verbatim}
 sls_detector_put 0-timing [auto/trigger/burst_trigger/gating]
 sls_detector_put 0-frames x
-sls_detector_put 0-triggers y
+sls_detector_put 0-cycles y  (\textcolor{red}{triggers})
 sls_detector_acquire 0-
 \end{verbatim}
 No timeout is expected between the start of the acquisition and the arrival of the first trigger. 
 
 Here are the implemented options so far:
 \begin{itemize}
-\item {\tt{auto}} is the software controlled acquisition (does not use triggers), where {\tt{exptime}} and {\tt{period}} have to be set. Set number of triggers (i.e. triggers) to 1 using {\tt{triggers}}. Set number of frames using {\tt{frames}}.
-\item {\tt{trigger}} 1 frame taken for 1 trigger. Your {\tt{frames}} needs to be  1 always, {\tt{triggers}} can be changed and defines how many triggers are considered.  {\tt{exptime}} needs to be set. In the GUI this is called trigger exposure series.  
-\item {\tt{burst\_trigger}} gets only 1 trigger, but allows to take many frames. With {\tt{frames}} one can change the number of frames. {\tt{triggers}} needs to be 1.  {\tt{exptime}} and {\tt{period}} have to be set. In the gui it is called trigger readout.
-\item{\tt{gating}} allows to get a frame only when the trigger pulse is gating. Note that in this case the exp time and period only depend on the gating signal. {\tt{triggers}} allows to select how many gates to consider.  Set number of frames to 1 using {\tt{frames}}. IMPORTANT: Up to firmware 23, the last subframe is oblige to finish being taken, despite the gate signal going down. This will be configurable from later fw and software version. Also, in gating mode, due to timimg of the state machine, you need to leave 500~$\mu$s deadtime between the end on an acquisition and the next. This is as the state machine is unable to check for changes in the status in the first 500~$\mu$s. ATTENTION: if you are in 16 bit mode and you are applying online rate corrections, as now the exptime is generated by the trigger, you might not have correct rate corrections. If you know what the exposure time is in the gating signal, then you can set the {\tt{exptime}} once and the rate corrections will be correct. In 32 bit mode, it does not matter as the rate corrections depends on the {\tt{subexptime}} which is software set independently from the gate exptime.
+\item {\tt{auto}} is the software controlled acquisition (does not use triggers), where {\tt{exptime}} and {\tt{period}} have to be set. Set number of {\tt{cycles}} (\textcolor{red}{triggers}) to 1. Set number of frames using {\tt{frames}}.
+\item {\tt{trigger}} 1 frame taken for 1 trigger. Your {\tt{frames}} needs to be  1 always, {\tt{cycles}} ({\tt{\textcolor{red}{triggers}}}) can be changed and defines how many triggers are considered.  {\tt{exptime}} needs to be set. In the GUI this is called trigger exposure series.  
+\item {\tt{burst\_trigger}} gets only 1 trigger, but allows to take many frames. With {\tt{frames}} one can change the number of frames. {\tt{cycles}} ({\tt{\textcolor{red}{triggers}}}) needs to be 1.  {\tt{exptime}} and {\tt{period}} have to be set. In the gui it is called trigger readout.
+\item{\tt{gating}} allows to get a frame only when the trigger pulse is gating. Note that in this case the exp time and period only depend on the gating signal. {\tt{cycles}} (\tt{\textcolor{red}{triggers}}) allows to select how many gates to consider.  Set number of frames to 1 using {\tt{frames}}. IMPORTANT: Up to firmware 23, the last subframe is oblige to finish being taken, despite the gate signal going down. This will be configurable from later fw and software version. Also, in gating mode, due to timimg of the state machine, you need to leave 500~$\mu$s deadtime between the end on an acquisition and the next. This is as the state machine is unable to check for changes in the status in the first 500~$\mu$s. ATTENTION: if you are in 16 bit mode and you are applying online rate corrections, as now the exptime is generated by the trigger, you might not have correct rate corrections. If you know what the exposure time is in the gating signal, then you can set the {\tt{exptime}} once and the rate corrections will be correct. In 32 bit mode, it does not matter as the rate corrections depends on the {\tt{subexptime}} which is software set independently from the gate exptime.
 
+ATTENTION: From release 4.1.1 with the {\tt{trigger}} option it is possible to have software triggers as a debugging tool (instead of the hardware trigger signal. One should start the acquisition (with the blocking {\tt{sls\_detector\_acquire}} if wanted and with another client one can send the softare trigger {\tt{sls\_detector\_put status trigger}}. This option allows for example to perform a motor scan (moving a motor in between single images) and still writing all images to the same file. 
 When using 32-bit mode, by default the acquisition ends the last complete subframe that was started when still the acquisition time was valid. This has been chosen as many people wants to know the exact acquisition time for when the detector was taking data and also, if {\tt{ratecorr}} are active, the last subframe will be correctly corrected, while otherwise it will be corrected with a wrong subdeadtime. 
 However, from 4.1.0, in gating mode, an option to immediately terminate the subframe when the gate signal goes down it is implemented to stop the acquisition at the same time.  This option is {\tt{./sls\_detector\_put interruptsubframe 1}} while the default option is {\tt{./sls\_detector\_put interruptsubframe 0}}.  
 
@@ -628,13 +676,13 @@ However, from 4.1.0, in gating mode, an option to immediately terminate the subf
 
 Hardware-wise, the ENABLE OUT signal outputs when the chips are really acquiring. This means that the single subframes will be output in 32 bit mode. The TRIGGER OUT outputs the sum-up-signal at the moment (which is useless). This will be changed in the future to output the envelop of the enable signal. 
 
-We are planning to change some functionality, i.e. unify the {\tt{trigger}} and {\tt{burst\_trigger}} trigger modes and make both {\tt{frames}} and {\tt{triggers}} configurable at the same time.
+We are planning to change some functionality, i.e. unify the {\tt{trigger}} and {\tt{burst\_trigger}} trigger modes and make both {\tt{frames}} and {\tt{cycles}} (\tt{\textcolor{red}{triggers}}) configurable at the same time.
 
 There is the possibility to use {\tt{timing trigger/burst\_trigger}} and send software single commands to fake the trigger. This is done with:
 \begin{verbatim}
 sls_detector_put 0-timing [trigger/burst_trigger]
 sls_detector_put 0-frames x
-sls_detector_put 0-triggers y
+sls_detector_put 0-cycles y (\textcolor{red}{triggers})
 sls_detector_status trigger
 \end{verbatim}
  Note that this functionality is very (!) useful if you need to do something between and acquisition and the next. This can be used to do a fast threshold scan for example. See section~\ref{sec:fastthresholdscan}.
@@ -714,8 +762,8 @@ If \textbf{dr} is 32 and \textbf{clkdivider} is not 2, whatever the detector get
 
 Here is a list of parameters that should be reset:
 \begin{enumerate}
-\item  \textbf{resetframescaught} should be reset to zero after every acquisition taken with {\tt{receiver start}},{\tt{status start}},{\tt{receiver stop}}. If the acquisition is taken with {\tt{sls\_detector\_acquire}}, there is no need to reset this.
-\item After changing the {\tt{timing}} mode of the detector, one should reset to '1' the unused value, in that specific timing mode, between \textbf{frames} and \textbf{triggers}. See section~\ref{triggering} for how to use the timing. At the present moment the detector will acquire more frames than planned if the variable not used between \textbf{frames} and \textbf{triggers} is not reset. In future releases, the unused variable will be ignored. Still resetting is a good practice.
+\item  \textbf{resetframescaught} (only for releases < 5.x) should be reset to zero after every acquisition taken with {\tt{receiver start}},{\tt{status start}},{\tt{receiver stop}}. If the acquisition is taken with {\tt{sls\_detector\_acquire}}, there is no need to reset this.
+\item After changing the {\tt{timing}} mode of the detector, one should reset to '1' the unused value, in that specific timing mode, between \textbf{frames} and \textbf{cycles} (\tt{\textcolor{red}{triggers}}). See section~\ref{triggering} for how to use the timing. At the present moment the detector will acquire more frames than planned if the variable not used between \textbf{frames} and \textbf{cycles} (\tt{\textcolor{red}{trigger}}) is not reset. In future releases, the unused variable will be ignored. Still resetting is a good practice.
       
 \end{enumerate}
 
@@ -988,13 +1036,14 @@ Packets Caught Mask        : 64 bytes
 Note that if one wants to  reconstruct the real time the detector was acquiring in 32 bit (autosumming mode), one would have to multiply the SubExptime (ns) for the SubFrame Number. 
 
 \subsection{Offline image reconstruction}
-The offline image reconstruction{\tt{slsImageReconstruction}} is not part of the package anymore. The code is still available doing \\
-{\tt{git clone git@git.psi.ch:sls\_detectors\_software/sls\_image\_reconstruction.git slsImageReconstruction}}.
-Checkout the {\tt{developer}} branch if in a 3.1.X release, the {\tt{v4.0.0}} branch if in 4.0.X release, or the {\tt{v4.1}} branch if in 4.1.X release of the {\tt{slsDetector}} code.
+The offline image reconstruction{\tt{slsImageReconstruction}} is not part of the package anymore. However, it can be retrieved from \\
+{\tt{git clone https://github.com/slsdetectorgroup/slsImageReconstruction.git slsImageReconstruction}}.\\
+Checkout the {\tt{v3.1}} branch if in a 3.1.X release, the {\tt{v4.0.0}} branch if in 4.0.X release, or the {\tt{v4.1}} branch if in 4.1.X release of the {\tt{slsDetector}} code. There is a {\tt{developer}} branch that has newer updates but needs to be tested.
 
-Three possible conversions are possible: into \textbf{cbf}, \textbf{hdf5} and \textbf{root} format. The detector writes 4 raw files per receiver. An offline image reconstruction executable has been written to collate the possible files together and produce output files. By default an interpolation between the values of the large pixels is performed. Gap pixels between modules are also inserted.
+Three possible conversions are possible: into \textbf{cbf}, \textbf{hdf5}. \textbf{tiff} and  \textbf{root} format. The detector writes 2 raw files per receiver. An offline image reconstruction executable has been written to collate the possible files together and produce output files. By default an interpolation between the values of the large pixels is performed. Gap pixels between modules are also inserted.
 
-Note that the number of images per file in the 3.1.X release is hardcoded and needs to match whatever you are using in {\tt{slsDetectorsPackage/slsReceiverSoftware/include/sls\_receiver\_defs.h}}:
+Note that the number of images per file in the 3.1.X release is hardcoded and needs to match whatever you are using in \\
+{\tt{slsDetectorsPackage/slsReceiverSoftware/include/sls\_receiver\_defs.h}}:
 \begin{verbatim}
 #define EIGER_MAX_FRAMES_PER_FILE	2000
 \end{verbatim}
@@ -1043,11 +1092,12 @@ cbfMaker9M [file_name_with_dir]
 contain the hardcoded geometry for the 1.5M (3 modules horizontal on the long side), the 1.5M OMNY geometry (3 modules next to each other on the long side) and for the 9M at cSAXS: 6(short side)$\times$3 (long side) modules.\\ 
 Missing packets in a frame and border pixels ($\times 2$ and $\times 4$ are given with value $-1$ at the present time.
 
+From the new {{v4.1.1}} all the define that you see below need only to be modified in the Makefile.
+
 Make sure the following options are uncommented in the {\tt{slsImageReconstruction/src/main\_csaxs.cpp}} file. 
 \begin{verbatim}
 #define MYCBF
-##following line only if you need to process with 
-##BUBBLE (Material Science / uXAS beamlines).
+##following line only if you need to process with BUBBLE
 #define MSHeader 
 \end{verbatim}
 Compile it with: 
@@ -1096,6 +1146,10 @@ To use it any geometry:\\
 eg.
 {\tt image /scratch/run\_63\_d0\_f000000000000\_3.raw  3072 512 1 2 ``Eiger'' 0}.\\
 
+With new new software, the new options to run the cbfMaker/hdf5Maker executablesare: 
+
+./hdf5Maker -f [filename] -d [outdirname] -x [npix\_x] -y [npix\_y] -v  (v flags that longedge is vertical, no argument) -n [name\_of\_hdf5\_dataset] -m (mask\_hot\_pixels, need to be in file maskpix.txt in the samedir as executable, no argument) -g [0,no filling/1,division/2,interpolation/3,interpolate,alternative]  
+
 \subsection{Read temperatures/HV from boards}
 
 With an updated kernel on the linux boards (ask to the SLS detector group for specifications), it is possible to monitor the temperature on the boards: 
@@ -1120,10 +1174,10 @@ In 500k--2M pixel systems there is a hardware temperature safety switch, which w
  
 The HV can also be set and read through the software:
 \begin{verbatim}
-./sls_detector_put vhighvoltage 150
-./sls_detector_get vhighvoltage 
+./sls_detector_put highvoltage 150
+./sls_detector_get highvoltage 
 \end{verbatim}
-Note that the get {\tt{vhighvoltage}} would return the measured HV from the master module only. If getting the vhighvoltage for individual halfmodules, only the master will have a value different from -999.
+Note that the get {\tt{highvoltage}} would return the measured HV from the master module only. If getting the highvoltage for individual halfmodules, only the master will have a value different from -999.
 
 \appendix
 
@@ -1205,13 +1259,21 @@ do the same for the other boards. You can program in parallel many boards, but y
 There are two ways to pulse the detector: 
 \begin{itemize}
 \item \textbf{Pulse digitally:} when you are interested to the output readout and do not care about the analog response from the pixels:
- \begin{verbatim}
+\begin{verbatim}
 sls_detector_put vthreshold 4000
 sls_detector_put vtr 4000
 sls_detector_put pulsechip N #to pulse N
 sls_detector_put pulsechip -1 #to get out of testing mode 
 \end{verbatim}
 Note that the answer will be $2 \cdot \textrm{{\tt{N}}} +2$ in this case.
+Or in \textcolor{red}{5.x}:
+\begin{verbatim}
+sls_detector_put vthreshold 4000
+sls_detector_put vtrim 4000
+sls_detector_put pulsechip N #to pulse N
+sls_detector_put pulsechip -1 #to get out of testing mode
+\end{verbatim}
+Note that the answer will be $2 \cdot \textrm{{\tt{N}}} +4$ in this case.
 
 \item  \textbf{Pulse analogically:} You want to really check the analogical part of the detector, not just the readout.
 
@@ -1230,8 +1292,25 @@ sls_detector_put resmat 0
 sls_detector_acquire
 \end{verbatim}
 You read {\tt{N}} in every pixel if you are setup correctly. 
+or in realese \textcolor{red}{5.x}:
+\begin{verbatim}
+sls_detector_put vcal 3600
+sls_detector_put vthreshold 1700
+sls_detector_put vrpreamp 3100
+for i in $(seq 0 7) ;
+do px=$((-255+i));
+sls_detector_put  pulse 0 $px 0;
+for j in $(seq 0 255) ; do
+sls_detector_put pulsenmove 100 0 1;
+done;
+done;
+sls_detector_put partialreset 1
+\end{verbatim}
 \end{itemize}
  
+
+
+
 \section{Load a noise pattern with shape}
 For debug purposes, we have created a noise pattern with a shape. If you reconstruct correctly your image, you should be able to read ".EIGER'' in the same direction for both the top and bottom in normal human readable orientation.
 To load the special noise file look at {\tt{settingsdir/eiger/standard/eigernoise.sn0xx}} in the package. 
@@ -1257,7 +1336,7 @@ We have also been requested if we could speed up the threshold scan. At the mome
 ./sls_detector_put enablefwrite 0
 ./sls_detector_put resetframescaught 0 
 ./sls_detector_put index 0
-./sls_detector_put triggers 21
+./sls_detector_put cycles 21  (\textcolor{red}{triggers})
 ./sls_detector_put receiver start
 ./sls_detector_put status start 
 for i in $(seq 0 20); 
@@ -1375,7 +1454,7 @@ Environment variable SLSDETNAME can be set for using 2 different detectors from
 \subsection{Measure the HV}
 For every system: 
 \begin{itemize}
-\item Software-wise measure it (now the software returns the measured value), with {\tt{sls\_detector\_get vhighvoltage}}. The returned value is the HV (for proper Eiger setting is approximately 150~V) if it is correctly set. If two master modules are presents (multi systems), the average is returned (still to be tested). If one asks for the individual $n$ half module bias voltage through {\tt{sls\_detector\_get n:vhighvoltage}}, if the $n$ module is a master, the actual voltage will be returned. If it is a slave, -999 will be returned. 
+\item Software-wise measure it (now the software returns the measured value), with {\tt{sls\_detector\_get highvoltage}}. The returned value is the HV (for proper Eiger setting is approximately 150~V) if it is correctly set. If two master modules are presents (multi systems), the average is returned (still to be tested). If one asks for the individual $n$ half module bias voltage through {\tt{sls\_detector\_get n:highvoltage}}, if the $n$ module is a master, the actual voltage will be returned. If it is a slave, -999 will be returned. 
 \item Hardware-wise (opening the detector) measure value of HV on C14 on the power distribution board. Check also that the small HV connector cable is really connected. 
  \end{itemize}
 
@@ -1426,7 +1505,7 @@ Scroll up in the terminal till you find:\\
 There is also an easier way, that is that only the master module will return the real value of the HV. If you have more than 1 detector system, then you will have more than 1 physical master, as the HV needs to be applied to all the systems.
 
 \begin{verbatim}
-for i in $(seq 0 36); do sls_detector_put $i:vhighvoltage; done
+for i in $(seq 0 36); do sls_detector_put $i:highvoltage; done
 \end{verbatim}
  Only the master will return to you a sensible number (150 normally). the others will return -999.
 
@@ -1515,8 +1594,8 @@ frames number
 where {\tt{number}} is a string to be interpreted as an integer.
 
 \item \begin{verbatim}
-sls_detector_get triggers
-triggers number 
+sls_detector_get cycles
+cycles number 
 \end{verbatim}
 where {\tt{number}} is a string to be interpreted as an integer.
 
@@ -1587,10 +1666,10 @@ ratecorr number
 where {\tt{number}} is a string that should be interpreted as a float in s.  0.000000 means correction off. Values above zero are the value of $\tau$ in ns.
 
 \item \begin{verbatim}
-sls_detector_get vhighvoltage
-vhighvoltage number
+sls_detector_get highvoltage
+highvoltage number
 \end{verbatim}
-where {\tt{number}} is a string that should be interpreted as an int and for proper Eiger setting is approximately 150~V if it is correctly set. If two master modules are presents (multi systems), the average is returned (still to be tested). If one asks for the individual $n$ half module bias voltage through {\tt{sls\_detector\_get n:vhighvoltage}}, if the $n$ module is a master, the actual voltage will be returned. If it is a slave, -999 will be returned. 
+where {\tt{number}} is a string that should be interpreted as an int and for proper Eiger setting is approximately 150~V if it is correctly set. If two master modules are presents (multi systems), the average is returned (still to be tested). If one asks for the individual $n$ half module bias voltage through {\tt{sls\_detector\_get n:highvoltage}}, if the $n$ module is a master, the actual voltage will be returned. If it is a slave, -999 will be returned. 
   
 \item \begin{verbatim}
 sls_detector_get busy

manual/manual-client/commands.txt

@@ -142,7 +142,7 @@
  "vpreamp"; // sets/get vpreamp value  (advanced! Mythen)
  "vshaper1"; // sets/get vshaper1 value  (advanced! Mythen)
  "vshaper2"; // sets/get vshaper2 value  (advanced! Mythen)
- "vhighvoltage"; // sets/get vhighvoltage value  (advanced! Chiptest board and Eiger)
+ "highvoltage"; // sets/get highvoltage value  (advanced! Chiptest board and Eiger)
  "vapower"; // sets/get vapower value  (advanced! Chiptest board)
  "vddpower"; // sets/get vddpower value  (advanced! Chiptest board)
  "vshpower"; // sets/get vshpower value  (advanced! Chiptest board)

manual/manual-client/slsDetectorClientHowTo.tex

@@ -335,7 +335,7 @@ Advanced settings changing the analog or digital performance of the acquisition.
 \item[vpreamp n]  Sets the DAC value of the preamp feedback  to n.
 \item[vshaper1 n]  Sets the DAC value of the shaper1 feedback  to n.  
 \item[vshaper2 n]   Sets the DAC value of the shaper2 feedback  to n.      
-\item[vhighvoltage n]   Sets the DAC value of the high voltage to n (in V).           
+\item[highvoltage n]   Sets the DAC value of the high voltage to n (in V).           
 \item[vapower n]   CHIPTEST BOARD ONLY - Sets the DAC value of the analog voltage to n. 
 \item[vddpower n]     CHIPTEST BOARD ONLY - Sets the DAC value of the analog voltage to n.      
 \item[vshpower n]     CHIPTEST BOARD ONLY - Sets the comparator power supply in dac units (0-1024).   
@@ -648,7 +648,7 @@ Advanced settings changing the analog or digital performance of the acquisition.
 \item[vpreamp]  Returns the DAC value of the preamp feedback  to n.
 \item[vshaper1]  Returns the DAC value of the shaper1 feedback  to n.  
 \item[vshaper2]  Returns the DAC value of the shaper2 feedback  to n.      
-\item[vhighvoltage]  Returns the DAC value of the high voltage to n.           
+\item[highvoltage]  Returns the DAC value of the high voltage to n.           
 \item[vapower]   CHIPTEST BOARD ONLY - Returns the DAC value of the analog voltage to n. 
 \item[vddpower]     CHIPTEST BOARD ONLY - Returns the DAC value of the analog voltage to n.      
 \item[vshpower]     CHIPTEST BOARD ONLY - Returns the comparator power supply in dac units (0-1024).   
@@ -714,7 +714,7 @@ One can configure all the detector settings in a parameter file {\tt{setup.det}}
 sls_detector_put parameters setup.det
 \end{verbatim}
 
-In the case of \E, the parameter file ({\tt{setup.det}} needs to setup the proper bias voltage of the sensor, i.e. needs to contain the line {\tt{vhighvoltage 150}}.
+In the case of \E, the parameter file ({\tt{setup.det}} needs to setup the proper bias voltage of the sensor, i.e. needs to contain the line {\tt{highvoltage 150}}.
 
 \subsection{Standard acquisition}
 

manual/manual-main/slsDetectorClientHowTo.tex

@@ -322,7 +322,7 @@ Advanced settings changing the analog or digital performance of the acquisition.
 \item[vpreamp n]  Sets the DAC value of the preamp feedback  to n.
 \item[vshaper1 n]  Sets the DAC value of the shaper1 feedback  to n.  
 \item[vshaper2 n]   Sets the DAC value of the shaper2 feedback  to n.      
-\item[vhighvoltage n]   CHIPTEST BOARD ONLY - Sets the DAC value of the high voltage to n.           
+\item[highvoltage n]   CHIPTEST BOARD ONLY - Sets the DAC value of the high voltage to n.           
 \item[vapower n]   CHIPTEST BOARD ONLY - Sets the DAC value of the analog voltage to n. 
 \item[vddpower n]     CHIPTEST BOARD ONLY - Sets the DAC value of the analog voltage to n.      
 \item[vshpower n]     CHIPTEST BOARD ONLY - Sets the comparator power supply in dac units (0-1024).   
@@ -594,7 +594,7 @@ Advanced settings changing the analog or digital performance of the acquisition.
 \item[vpreamp]  Returns the DAC value of the preamp feedback  to n.
 \item[vshaper1]  Returns the DAC value of the shaper1 feedback  to n.  
 \item[vshaper2]  Returns the DAC value of the shaper2 feedback  to n.      
-\item[vhighvoltage]   CHIPTEST BOARD ONLY - Returns the DAC value of the high voltage to n.           
+\item[highvoltage]   CHIPTEST BOARD ONLY - Returns the DAC value of the high voltage to n.           
 \item[vapower]   CHIPTEST BOARD ONLY - Returns the DAC value of the analog voltage to n. 
 \item[vddpower]     CHIPTEST BOARD ONLY - Returns the DAC value of the analog voltage to n.      
 \item[vshpower]     CHIPTEST BOARD ONLY - Returns the comparator power supply in dac units (0-1024).   

python/CMakeLists.txt

@@ -1,20 +1,23 @@
 
-pybind11_add_module(_sls_detector 
+# find_package (Python COMPONENTS Interpreter Development)
+
+pybind11_add_module(_slsdet 
     src/main.cpp 
     src/enums.cpp
     src/detector.cpp
     src/network.cpp
 )
 
-target_link_libraries(_sls_detector PUBLIC 
+target_link_libraries(_slsdet PUBLIC 
                         slsDetectorShared
                         slsReceiverShared
                         slsSupportLib
-                        zmq )  
+                        ${ZeroMQ_LIBRARIES}
+                        )  
 
 
 
-set_target_properties(_sls_detector PROPERTIES
+set_target_properties(_slsdet PROPERTIES
                         LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin
                     )
 
@@ -32,13 +35,14 @@ set( PYTHON_FILES
     jungfrau.py
     mythen3.py
     registers.py
+    lookup.py
     utils.py
 
 )
 
 foreach(FILE ${PYTHON_FILES})
-    configure_file( sls_detector/${FILE}  
-    ${CMAKE_BINARY_DIR}/bin/sls_detector/${FILE}  )
+    configure_file( slsdet/${FILE}  
+    ${CMAKE_BINARY_DIR}/bin/slsdet/${FILE}  )
 
 endforeach(FILE ${PYTHON_FILES})
 

python/api-tests/test_detector.py

@@ -0,0 +1,82 @@
+import pytest
+import datetime as dt
+from slsdet import Detector, timingMode, detectorType
+
+not_eiger = pytest.mark.skipif(
+    Detector().type == detectorType.EIGER, reason="Does not work for eiger"
+)
+
+
+@pytest.fixture
+def det():
+    from slsdet import Detector
+
+    return Detector()
+
+
+def test_frames(det):
+    for n in [1, 100, 3245, 10000]:
+        det.frames = n
+        assert det.frames == n
+    det.frames = 1
+
+
+def test_triggers(det):
+    for n in [1, 100, 3245, 10000]:
+        det.triggers = n
+        assert det.triggers == n
+    det.triggers = 1
+
+
+def test_exptime(det):
+    det.exptime = 1
+    assert det.exptime == 1
+    det.exptime = dt.timedelta(milliseconds=10)
+    assert det.exptime == 0.01
+    det.exptime = 1
+
+
+def test_period(det):
+    det.period = 3.2
+    assert det.period == 3.2
+
+    p = dt.timedelta(microseconds=1020)
+    det.period = p
+    assert det.period == 0.001020
+    r = det.getPeriod()
+    assert r[0] == p
+    det.period = 0
+    assert det.period == 0
+
+
+def test_lock(det):
+    for l in [True, False]:
+        det.lock = l
+        assert det.lock == l
+
+
+def test_timing(det):
+    # auto and trigger is available for all det
+    for m in [timingMode.TRIGGER_EXPOSURE, timingMode.AUTO_TIMING]:
+        det.timing = m
+        assert det.timing == m
+
+@not_eiger
+def test_delay(det):
+    det.delay = 1
+    assert det.delay == 1
+
+    t  = dt.timedelta(microseconds=1)
+    det.delay = t
+    assert det.delay == t.total_seconds()
+
+    r = det.getDelayAfterTrigger()[0]
+    assert r == t
+
+    det.delay = 0
+    assert det.delay == 0
+
+
+@not_eiger
+def test_delayl(det):
+    assert det.delayl == 0

python/api-tests/test_jungfrau.py

@@ -0,0 +1,89 @@
+import pytest
+import datetime as dt
+from slsdet import Detector, detectorType
+
+"""
+These tests are designed to work the API and catch
+any changes in behavior or naming. Tests are expected
+to pass with a virtual detector or a real one
+
+"""
+
+
+@pytest.fixture
+def jf():
+    from slsdet import Jungfrau
+    return Jungfrau()
+
+
+jungfrautest = pytest.mark.skipif(
+    Detector().type != detectorType.JUNGFRAU, reason="Only valid for Jungfrau"
+)
+
+
+@jungfrautest
+def test_storagecells(jf):
+    for i in range(16):
+        jf.storagecells = i
+        assert jf.storagecells == i
+    jf.storagecells = 0  # default
+
+@jungfrautest
+def test_storagecell_start(jf):
+    for i in range(16):
+        jf.storagecell_start = i
+        assert jf.storagecell_start == i
+    jf.storagecells = 15  # default
+
+@jungfrautest
+def test_storagecell_delay(jf):
+    for t in [0.001, 0.0002, 0.0013]:
+        jf.storagecell_delay = t
+        assert jf.storagecell_delay == t
+    jf.storagecell_delay = 0  # default
+
+@jungfrautest
+def test_temp_event(jf):
+    # hard to test with virtual server
+    assert jf.temp_event == 0
+
+@jungfrautest
+def test_temp_threshold(jf):
+    for th in [0, 10, 43, 72]:
+        jf.temp_threshold = th
+        assert jf.temp_threshold == th
+    jf.temp_threshold = 0
+
+@jungfrautest
+def test_auto_comp_disable(jf):
+    for v in [True, False]:
+        jf.auto_comp_disable = v
+        assert jf.auto_comp_disable == v
+
+@jungfrautest
+def test_numinterfaces(jf):
+    for n in [2, 1]:
+        jf.numinterfaces = n
+        assert jf.numinterfaces == n
+
+@jungfrautest
+def test_dr(jf):
+    assert jf.dr == 16
+
+@jungfrautest
+def test_temp_control(jf):
+    for v in [True, False]:
+        jf.temp_control = v
+        assert jf.temp_control == v
+
+@jungfrautest
+def test_startingfnum(jf):
+    for n in [10, 127, 43321, 1]:
+        jf.startingfnum = n
+        assert jf.startingfnum == n
+
+@jungfrautest
+def test_selinterface(jf):
+    for i in [1, 0]:
+        jf.selinterface = i
+        assert jf.selinterface == i

python/scripts/basic.py

@@ -3,13 +3,13 @@ import sys
 import numpy as np
 sys.path.append(os.path.join(os.getcwd(), 'bin'))
 
-from sls_detector import Detector, Mythen3, Eiger, Jungfrau, DetectorDacs, Dac, Ctb
-from sls_detector import dacIndex
-
+from slsdet import Detector, Mythen3, Eiger, Jungfrau, DetectorDacs, Dac, Ctb
+from slsdet import dacIndex, readoutMode
+from slsdet.lookup import view, find
 
 d = Detector()
 # e = Eiger()
-# c = Ctb()
+c = Ctb()
 # j = Jungfrau()
-m = Mythen3()
+# m = Mythen3()
 

python/scripts/cmd_python.py

@@ -4,17 +4,18 @@ out = subprocess.run(['g', 'list'], stdout = subprocess.PIPE, encoding=locale.ge
 cmd = out.stdout.splitlines()
 cmd.pop(0)
 
-from sls_detector import Detector, Eiger, Ctb
+from slsdet import Detector, Eiger, Ctb
 
 pycmd = dir(Detector)+dir(Eiger)+dir(Ctb)
 
+#Add commands that we should not expect as direct commands in python
 pycmd += ['vrf', 'vtr', 'vrs', 'vtgstv', 'vsvn', 'vtrim',
 'vsvp', 'vth1', 'vth2', 'vth3', 'vshaper', 'vshaperneg', 'rxb_rb',
-'rxb_lb', 'vref_prech', 'vref_restore', 'vref_cds',
+'rxb_lb', 'vref_prech', 'vref_rstore', 'vref_cds',
 'vpreamp', 'vref_comp', 'vref_comp_fe vref_ds', 'vref_h_adc', 
 'vref_l_adc', 'iodelay', 'list', 'vref_ds', 'vis', 'vpl', 
 'vref_comp_fe', 'vph', 'vout_cm', 'vcp', 'vcn', 'vcmp_ll', 'vcmp_lr'
-, 'vcmp_rl', 'vcmp_rr']
+, 'vcmp_rl', 'vcmp_rr', 'daclist', 'dacvalues', 'vcal', 'vcas']
 
 missing = []
 for c in cmd:

python/scripts/generate_enums.py

@@ -9,19 +9,11 @@ enums.cpp
 import re
 import subprocess
 
+from parse import remove_comments
 
-# def remove_comments(text):
-#     def replacer(match):
-#         s = match.group(0)
-#         if s.startswith('/'):
-#             return " " # note: a space and not an empty string
-#         else:
-#             return s
-#     pattern = re.compile(
-#         r'//.*?$|/\*.*?\*/|\'(?:\\.|[^\\\'])*\'|"(?:\\.|[^\\"])*"',
-#         re.DOTALL | re.MULTILINE
-#     )
-#     return re.sub(pattern, replacer, text)
+def single_line_enum(line):
+    sub = line[line.find('{')+1:line.find('}')]
+    return sub.strip().split(',')
 
 def extract_enums(lines):
     line_iter = iter(lines)
@@ -30,19 +22,27 @@ def extract_enums(lines):
         m = re.search("(?<=enum )\w+(?= {)", line)
         if m:
             enum_name = m.group()
-            # print(enum_name)
+            print(enum_name)
+            # print(line)
             fields = []
-            while True:
-                l  = next(line_iter)
-                if '};' in l:
-                    break
-                m = re.search("\w+", l)
-                try:
-                    # print('\t', m.group())
-                    fields.append(m.group())
 
-                except:
-                    pass
+            #deal with single line enums
+            if '};' in line:
+                fields = single_line_enum(line)
+            else:
+                #deal with multi line enums
+                while True:
+                    l  = next(line_iter)
+                    if '};' in l:
+                        break
+                    m = re.search("\w+", l)
+                    try:
+                        # print('\t', m.group())
+                        fields.append(m.group())
+
+                    except:
+                        pass
+            fields = [f.strip() for f in fields]
             enums[enum_name] = fields
     return enums
 

python/scripts/generate_functions.py

@@ -13,12 +13,18 @@ import argparse
 
 from parse import system_include_paths
 
-default_build_path = "/home/l_frojdh/sls/build/" 
+default_build_path = "/home/l_frojdh/sls/build/"
 fpath = "../../slsDetectorSoftware/src/Detector.cpp"
 
 
 parser = argparse.ArgumentParser()
-parser.add_argument("-p", "--build_path", help="Path to the build database", type = str, default=default_build_path)
+parser.add_argument(
+    "-p",
+    "--build_path",
+    help="Path to the build database",
+    type=str,
+    default=default_build_path,
+)
 cargs = parser.parse_args()
 
 db = cindex.CompilationDatabase.fromDirectory(cargs.build_path)
@@ -26,7 +32,7 @@ index = cindex.Index.create()
 args = db.getCompileCommands(fpath)
 args = list(iter(args).__next__().arguments)[0:-1]
 args = args + "-x c++ --std=c++11".split()
-syspath = system_include_paths('clang++')
+syspath = system_include_paths("clang++")
 incargs = ["-I" + inc for inc in syspath]
 args = args + incargs
 
@@ -39,6 +45,9 @@ ag = []
 
 lines = []
 
+ag2 = []
+
+cn = []
 
 def get_arguments(node):
     args = [a.type.spelling for a in node.get_arguments()]
@@ -46,9 +55,25 @@ def get_arguments(node):
         "py::arg() = Positions{}" if item == "sls::Positions" else "py::arg()"
         for item in args
     ]
-    args = ', '.join(args)
+    args = ", ".join(args)
     if args:
-        args = f', {args}'
+        args = f", {args}"
+    return args
+
+
+def get_fdec(node):
+    args = [a.type.spelling for a in node.get_arguments()]
+    if node.result_type.spelling:
+        return_type = node.result_type.spelling
+    else:
+        return_type = 'void'
+    
+    if node.is_const_method():
+        const = 'const'
+    else:
+        const = ''
+    args = ", ".join(args)
+    args = f'({return_type}(Detector::*)({args}){const})'
     return args
 
 
@@ -62,23 +87,37 @@ def visit(node):
                 ):
                     m.append(child)
                     args = get_arguments(child)
-                    lines.append(f'.def(\"{child.spelling}\", &Detector::{child.spelling}{args})')
+                    fs = get_fdec(child)
+                    lines.append(
+                        f'.def("{child.spelling}",{fs} &Detector::{child.spelling}{args})'
+                    )
+                    cn.append(child)
     for child in node.get_children():
         visit(child)
 
+        # .def("setRxHostname",
+        #      (void (Detector::*)(const std::string &, Positions)) &
+        #          Detector::setRxHostname,
+        #      py::arg(), py::arg() = Positions{})
+        # .def("setRxHostname",
+        #      (void (Detector::*)(const std::vector<std::string> &)) &
+        #          Detector::setRxHostname,
+        #      py::arg())
+
 
 visit(tu.cursor)
 
 
-with open('../src/detector_in.cpp') as f:
+with open("../src/detector_in.cpp") as f:
     data = f.read()
-s = ''.join(lines)
-s += ';'
-text = data.replace('[[FUNCTIONS]]', s)
-warning = '/* WARINING This file is auto generated any edits might be overwritten without warning */\n\n'
-with open('../src/detector.cpp', 'w') as f:
+s = "".join(lines)
+s += ";"
+text = data.replace("[[FUNCTIONS]]", s)
+warning = "/* WARINING This file is auto generated any edits might be overwritten without warning */\n\n"
+with open("../src/detector.cpp", "w") as f:
     f.write(warning)
     f.write(text)
 
 # run clang format on the output
-subprocess.run(['clang-format', '../src/detector.cpp', '-i'])
+subprocess.run(["clang-format", "../src/detector.cpp", "-i"])
+

python/scripts/list_tested_cmd.py

@@ -1,11 +1,19 @@
+"""
+Utility to find and list which command line functions have tests and
+where the tests are located
+"""
+#local import for for parsing c++
 import parse
-from pathlib import Path
+
+#General python stuff
 import os
 import locale
 import argparse
-path  = Path('../../slsDetectorSoftware/tests/')
 import subprocess
+from pathlib import Path
 
+#Realative path from this dir
+path  = Path('../../slsDetectorSoftware/tests/')
 parser = argparse.ArgumentParser()
 parser.add_argument("-s", "--startswith", help="for filter", type = str, default=None)
 args = parser.parse_args()
@@ -15,15 +23,12 @@ tested = []
 for fname in files:
     with open(path/fname) as f:
         data = f.read()
-
     data = parse.remove_comments(data)
     data = data.splitlines()
-
-
     for line in data:
         if 'TEST_CASE' in line or 'SECTION' in line:
             cmd = line.split("\"")[1]
-            tested.append(cmd)
+            tested.append([cmd, fname])
 
 out = subprocess.run(['g', 'list'], stdout = subprocess.PIPE, encoding=locale.getpreferredencoding())
 all_cmd = out.stdout.splitlines()
@@ -33,18 +38,18 @@ all_cmd.pop(0)
 
 if args.startswith is not None:
     all_cmd = [cmd for cmd in all_cmd if cmd.startswith(args.startswith)]
-    tested = [cmd for cmd in tested if cmd.startswith(args.startswith)]
+    tested = [cmd for cmd in tested if cmd[0].startswith(args.startswith)]
 
+tn = [cmd[0] for cmd in tested]
 
-
-not_tested = [cmd for cmd in all_cmd if cmd not in tested]
-misnamed = [cmd for cmd in tested if cmd not in all_cmd]
-tested = [cmd for cmd in tested if cmd in all_cmd]
+not_tested = [cmd for cmd in all_cmd if cmd not in tn]
+misnamed = [cmd for cmd in tn if cmd not in all_cmd]
+tested = [cmd for cmd in tested if cmd[0] in all_cmd]
 
 
 print("\nThe following commands are tested:")
 for cmd in tested:
-    print(cmd)
+    print(f'{cmd[0]:>18} : {cmd[1]}')
 
 print("\nThe following commands are NOT tested:")
 for cmd in not_tested:

python/setup.py

@@ -1,5 +1,5 @@
 """
-Setup file for sls_detector
+Setup file for slsdet
 Build upon the pybind11 example found here: https://github.com/pybind/python_example
 """
 from setuptools import setup, Extension, find_packages
@@ -8,7 +8,7 @@ import sys
 import setuptools
 import os
 
-__version__ = 'refactor'
+__version__ = os.environ.get('GIT_DESCRIBE_TAG', 'developer')
 
 
 def get_conda_path():
@@ -19,32 +19,33 @@ def get_conda_path():
     return os.environ['CONDA_PREFIX']
 
 
-class get_pybind_include(object):
-    """Helper class to determine the pybind11 include path
-    The purpose of this class is to postpone importing pybind11
-    until it is actually installed, so that the ``get_include()``
-    method can be invoked. """
+# class get_pybind_include(object):
+#     """Helper class to determine the pybind11 include path
+#     The purpose of this class is to postpone importing pybind11
+#     until it is actually installed, so that the ``get_include()``
+#     method can be invoked. """
 
-    def __init__(self, user=False):
-        self.user = user
+#     def __init__(self, user=False):
+#         self.user = user
 
-    def __str__(self):
-        import pybind11
-        return pybind11.get_include(self.user)
+#     def __str__(self):
+#         import pybind11
+#         return pybind11.get_include(self.user)
 
 
 ext_modules = [
     Extension(
-        '_sls_detector',
+        '_slsdet',
         ['src/main.cpp',
         'src/enums.cpp',
         'src/detector.cpp',
         'src/network.cpp'],
         include_dirs=[
             # Path to pybind11 headers
-            get_pybind_include(),
-            get_pybind_include(user=True),
-            os.path.join(get_conda_path(), 'include/slsDetectorPackage'),
+            # get_pybind_include(),
+            # get_pybind_include(user=True),
+            os.path.join('../libs/pybind11/include'),
+            os.path.join(get_conda_path(), 'include'),
 
         ],
         libraries=['SlsDetector', 'SlsReceiver', 'zmq'],
@@ -109,20 +110,28 @@ class BuildExt(build_ext):
             opts.append('/DVERSION_INFO=\\"%s\\"' % self.distribution.get_version())
         for ext in self.extensions:
             ext.extra_compile_args = opts
-        build_ext.build_extensions(self)
 
+        print('**************************************************')
+        print(ct)
+        print(opts)
+        print('**************************************************')
+        build_ext.build_extensions(self)
+        
+
+
+def get_shared_lib():
+    return [f for f in os.listdir('.') if '_slsdet' in f]
 
 setup(
-    name='sls_detector',
+    name='slsdet',
     version=__version__,
     author='Erik Frojdh',
     author_email='erik.frojdh@psi.ch',
-    url='https://github.com/slsdetectorgroup/sls_detector',
+    url='https://github.com/slsdetectorgroup/slsDetectorPackage',
     description='Detector API for SLS Detector Group detectors',
     long_description='',
     packages=find_packages(exclude=['contrib', 'docs', 'tests']),
     ext_modules=ext_modules,
-    install_requires=['pybind11>=2.2'],
     cmdclass={'build_ext': BuildExt},
     zip_safe=False,
 )

python/simple-integration-tests/eiger/test.config

@@ -27,7 +27,7 @@ dr 32
 
 threaded 1
 tengiga 0
-vhighvoltage 150
+highvoltage 150
 iodelay 660
 
 #gappixels 1

python/simple-integration-tests/jungfrau_0_6/tests/test.par

@@ -1 +1 @@
-vhighvoltage 200
+highvoltage 200

python/sls_detector/__init__.py

@@ -1,22 +0,0 @@
-# from .detector import Detector, DetectorError, free_shared_memory
-from .eiger import Eiger
-from .ctb import Ctb
-from .dacs import DetectorDacs, Dac
-from .detector import Detector
-from .jungfrau import Jungfrau
-from .mythen3 import Mythen3
-# from .jungfrau_ctb import JungfrauCTB
-# from _sls_detector import DetectorApi
-
-import _sls_detector
-
-defs = _sls_detector.slsDetectorDefs
-runStatus = _sls_detector.slsDetectorDefs.runStatus
-speedLevel = _sls_detector.slsDetectorDefs.speedLevel
-timingMode = _sls_detector.slsDetectorDefs.timingMode
-dacIndex = _sls_detector.slsDetectorDefs.dacIndex
-detectorType = _sls_detector.slsDetectorDefs.detectorType
-detectorSettings = _sls_detector.slsDetectorDefs.detectorSettings
-
-IpAddr = _sls_detector.IpAddr
-MacAddr = _sls_detector.MacAddr

python/sls_detector/ctb.py

@@ -1,121 +0,0 @@
-from .detector import Detector
-from .utils import element_if_equal
-from .dacs import DetectorDacs
-import _sls_detector
-dacIndex = _sls_detector.slsDetectorDefs.dacIndex
-from .detector_property import DetectorProperty
-
-class CtbDacs(DetectorDacs):
-    """
-    Ctb dacs
-    """
-    _dacs = [('dac0',  dacIndex(0), 0, 4000,    1400),
-             ('dac1',  dacIndex(1), 0, 4000,    1200),
-             ('dac2',  dacIndex(2), 0, 4000,    900),
-             ('dac3',  dacIndex(3), 0, 4000,    1050),
-             ('dac4',  dacIndex(4), 0, 4000,     1400),
-             ('dac5',  dacIndex(5), 0, 4000,    655),
-             ('dac6',  dacIndex(6), 0, 4000,    2000),
-             ('dac7',  dacIndex(7), 0, 4000,     1400),
-             ('dac8',  dacIndex(8), 0, 4000,    850),
-             ('dac9',  dacIndex(9), 0, 4000,    2000),
-             ('dac10', dacIndex(10), 0, 4000,    2294),
-             ('dac11', dacIndex(11), 0, 4000,    983),
-             ('dac12', dacIndex(12), 0, 4000,    1475),
-             ('dac13', dacIndex(13), 0, 4000,    1200),
-             ('dac14', dacIndex(14), 0, 4000,    1600),
-             ('dac15', dacIndex(15), 0, 4000,    1455),
-             ('dac16', dacIndex(16), 0, 4000,       0),
-             ('dac17', dacIndex(17), 0, 4000,    1000),
-            ]
-    _dacnames = [_d[0] for _d in _dacs]
-
-from .utils import element
-class Ctb(Detector):
-    def __init__(self, id = 0):
-        super().__init__(id)
-        self._frozen = False 
-        self._dacs = CtbDacs(self)
-    
-    @property
-    def dacs(self):
-        return self._dacs
-
-    @property
-    @element
-    def v_a(self):
-        return self.getDAC(dacIndex.V_POWER_A, True)
-
-    @v_a.setter
-    def v_a(self, value):
-        self.setDAC(dacIndex.V_POWER_A, value, True)
-
-    @property
-    @element
-    def v_b(self):
-        return self.getDAC(dacIndex.V_POWER_B, True)
-
-    @v_b.setter
-    def v_b(self, value):
-        self.setDAC(dacIndex.V_POWER_B, value, True)
-
-    @property
-    @element
-    def v_c(self):
-        return self.getDAC(dacIndex.V_POWER_C, True)
-
-    @v_c.setter
-    def v_c(self, value):
-        self.setDAC(dacIndex.V_POWER_C, value, True)
-
-    @property
-    @element
-    def v_d(self):
-        return self.getDAC(dacIndex.V_POWER_D, True)
-
-    @v_d.setter
-    def v_d(self, value):
-        self.setDAC(dacIndex.V_POWER_D, value, True)
-
-    @property
-    @element
-    def v_io(self):
-        return self.getDAC(dacIndex.V_POWER_IO, True)
-
-    @v_io.setter
-    def v_io(self, value):
-        self.setDAC(dacIndex.V_POWER_IO, value, True)
-
-    @property
-    @element
-    def v_limit(self):
-        return self.getDAC(dacIndex.V_LIMIT, True)
-
-    @v_limit.setter
-    def v_limit(self, value):
-        self.setDAC(dacIndex.V_LIMIT, value, True)
-
-    @property
-    @element
-    def im_a(self):
-        return self.getMeasuredCurrent(dacIndex.I_POWER_A)
-
-    @property
-    @element
-    def im_b(self):
-        return self.getMeasuredCurrent(dacIndex.I_POWER_B)
-
-    @property
-    @element
-    def im_c(self):
-        return self.getMeasuredCurrent(dacIndex.I_POWER_C)
-
-    @property
-    @element
-    def im_d(self):
-        return self.getMeasuredCurrent(dacIndex.I_POWER_D)
-
-    @property
-    @element
-    def im_io(self):
-        return self.getMeasuredCurrent(dacIndex.I_POWER_IO)

python/slsdet/__init__.py

@@ -0,0 +1,37 @@
+# from .detector import Detector, DetectorError, free_shared_memory
+from .eiger import Eiger
+from .ctb import Ctb
+from .dacs import DetectorDacs, Dac
+from .detector import Detector
+from .jungfrau import Jungfrau
+from .mythen3 import Mythen3
+# from .jungfrau_ctb import JungfrauCTB
+# from _slsdet import DetectorApi
+
+import _slsdet
+
+defs = _slsdet.slsDetectorDefs
+runStatus = _slsdet.slsDetectorDefs.runStatus
+speedLevel = _slsdet.slsDetectorDefs.speedLevel
+
+
+detectorType = _slsdet.slsDetectorDefs.detectorType
+frameDiscardPolicy = _slsdet.slsDetectorDefs.frameDiscardPolicy
+fileFormat = _slsdet.slsDetectorDefs.fileFormat
+dimension = _slsdet.slsDetectorDefs.dimension
+externalSignalFlag = _slsdet.slsDetectorDefs.externalSignalFlag
+timingMode = _slsdet.slsDetectorDefs.timingMode
+dacIndex = _slsdet.slsDetectorDefs.dacIndex
+detectorSettings = _slsdet.slsDetectorDefs.detectorSettings
+clockIndex = _slsdet.slsDetectorDefs.clockIndex
+readoutMode = _slsdet.slsDetectorDefs.readoutMode
+masterFlags = _slsdet.slsDetectorDefs.masterFlags
+
+frameModeType = _slsdet.slsDetectorDefs.frameModeType
+detectorModeType = _slsdet.slsDetectorDefs.detectorModeType
+burstMode = _slsdet.slsDetectorDefs.burstMode
+timingSourceType = _slsdet.slsDetectorDefs.timingSourceType
+
+
+IpAddr = _slsdet.IpAddr
+MacAddr = _slsdet.MacAddr

python/slsdet/ctb.py

@@ -0,0 +1,43 @@
+from .detector import Detector
+from .utils import element_if_equal
+from .dacs import DetectorDacs
+import _slsdet
+dacIndex = _slsdet.slsDetectorDefs.dacIndex
+from .detector_property import DetectorProperty
+
+class CtbDacs(DetectorDacs):
+    """
+    Ctb dacs
+    """
+    _dacs = [('dac0',  dacIndex(0), 0, 4000,    1400),
+             ('dac1',  dacIndex(1), 0, 4000,    1200),
+             ('dac2',  dacIndex(2), 0, 4000,    900),
+             ('dac3',  dacIndex(3), 0, 4000,    1050),
+             ('dac4',  dacIndex(4), 0, 4000,     1400),
+             ('dac5',  dacIndex(5), 0, 4000,    655),
+             ('dac6',  dacIndex(6), 0, 4000,    2000),
+             ('dac7',  dacIndex(7), 0, 4000,     1400),
+             ('dac8',  dacIndex(8), 0, 4000,    850),
+             ('dac9',  dacIndex(9), 0, 4000,    2000),
+             ('dac10', dacIndex(10), 0, 4000,    2294),
+             ('dac11', dacIndex(11), 0, 4000,    983),
+             ('dac12', dacIndex(12), 0, 4000,    1475),
+             ('dac13', dacIndex(13), 0, 4000,    1200),
+             ('dac14', dacIndex(14), 0, 4000,    1600),
+             ('dac15', dacIndex(15), 0, 4000,    1455),
+             ('dac16', dacIndex(16), 0, 4000,       0),
+             ('dac17', dacIndex(17), 0, 4000,    1000),
+            ]
+    _dacnames = [_d[0] for _d in _dacs]
+
+from .utils import element
+class Ctb(Detector):
+    def __init__(self, id = 0):
+        super().__init__(id)
+        self._frozen = False 
+        self._dacs = CtbDacs(self)
+    
+    @property
+    def dacs(self):
+        return self._dacs
+

python/slsdet/dacs.py

@@ -1,9 +1,9 @@
 from .detector_property import DetectorProperty
 from functools import partial
 import numpy as np
-import _sls_detector
+import _slsdet
 from .detector import freeze
-dacIndex = _sls_detector.slsDetectorDefs.dacIndex
+dacIndex = _slsdet.slsDetectorDefs.dacIndex
 class Dac(DetectorProperty):
     """
     This class represents a dac on the detector. One instance handles all

python/slsdet/detector.py

@@ -1,38 +1,29 @@
-from _sls_detector import CppDetectorApi
-from _sls_detector import slsDetectorDefs
+from _slsdet import CppDetectorApi
+from _slsdet import slsDetectorDefs
+from _slsdet import IpAddr, MacAddr
 
 runStatus = slsDetectorDefs.runStatus
+timingMode = slsDetectorDefs.timingMode
 speedLevel = slsDetectorDefs.speedLevel
 dacIndex = slsDetectorDefs.dacIndex
+detectorType = slsDetectorDefs.detectorType
 
 from .utils import element_if_equal, all_equal, get_set_bits, list_to_bitmask
-from .utils import Geometry, to_geo
+from .utils import Geometry, to_geo, element, reduce_time, is_iterable
+from . import utils as ut
 from .registers import Register, Adc_register
 import datetime as dt
 
 from functools import wraps
 from collections import namedtuple
-
-# class Register:
-#     """
-#     Helper class to read and write to registers using a
-#     more Pythonic syntax
-#     """
-#     def __init__(self, detector):
-#         self._detector = detector
-
-#     def __getitem__(self, key):
-#         return self._detector.readRegister(key)
-
-#     def __setitem__(self, key, value):
-#         self._detector.writeRegister(key, value)
+import socket
 
 
 def freeze(cls):
     cls._frozen = False
 
     def frozensetattr(self, key, value):
-        if self._frozen and not hasattr(self, key):
+        if self._frozen and not key in dir(self):
             raise AttributeError(
                 "Class {} is frozen. Cannot set {} = {}".format(
                     cls.__name__, key, value
@@ -72,23 +63,16 @@ class Detector(CppDetectorApi):
         self._register = Register(self)
         self._adc_register = Adc_register(self)
 
-
-
     # CONFIGURATION
     def __len__(self):
         return self.size()
 
     def __repr__(self):
-            return '{}(id = {})'.format(self.__class__.__name__,
-                                        self.getShmId())
-
+        return "{}(id = {})".format(self.__class__.__name__, self.getShmId())
 
     def free(self):
         self.freeSharedMemory()
 
-
-
-
     @property
     def config(self):
         return NotImplementedError("config is set only")
@@ -124,7 +108,7 @@ class Detector(CppDetectorApi):
 
     @property
     def server_version(self):
-        #TODO! handle hex print
+        # TODO! handle hex print
         return element_if_equal(self.getDetectorServerVersion())
 
     @property
@@ -145,7 +129,7 @@ class Detector(CppDetectorApi):
 
     @dr.setter
     def dr(self, dr):
-        self.setDynamicRange(dr)    
+        self.setDynamicRange(dr)
 
     @property
     def module_geometry(self):
@@ -176,65 +160,54 @@ class Detector(CppDetectorApi):
     def frames(self, n_frames):
         self.setNumberOfFrames(n_frames)
 
+    @property
+    def triggers(self):
+        return element_if_equal(self.getNumberOfTriggers())
+
+    @triggers.setter
+    def triggers(self, n_triggers):
+        self.setNumberOfTriggers(n_triggers)
 
     @property
     def exptime(self):
-        res = self.getExptime()
-        return element_if_equal([it.total_seconds() for it in res])
+        if self.type == detectorType.MYTHEN3:
+            res = self.getExptimeForAllGates()
+        else:
+            res = self.getExptime()
+        return reduce_time(res)
 
     @exptime.setter
     def exptime(self, t):
-        if isinstance(t, dt.timedelta):
-            self.setExptime(t)
-        else:
-            self.setExptime(dt.timedelta(seconds=t))
-
-    @property
-    def subexptime(self):
-        res = self.getSubExptime()
-        return element_if_equal([it.total_seconds() for it in res])
-
-    @subexptime.setter
-    def subexptime(self, t):
-        if isinstance(t, dt.timedelta):
-            self.setSubExptime(t)
-        else:
-            self.setSubExptime(dt.timedelta(seconds=t))
-
-    @property
-    def subdeadtime(self):
-        res = self.getSubDeadTime()
-        return element_if_equal([it.total_seconds() for it in res])
-
-    @subdeadtime.setter
-    def subdeadtime(self, t):
-        if isinstance(t, dt.timedelta):
-            self.setSubDeadTime(t)
-        else:
-            self.setSubDeadTime(dt.timedelta(seconds=t))
-
+        self.setExptime(t)
 
     @property
     def period(self):
         res = self.getPeriod()
-        return element_if_equal([it.total_seconds() for it in res])
+        return reduce_time(res)
 
     @period.setter
     def period(self, t):
-        if isinstance(t, dt.timedelta):
-            self.setPeriod(t)
-        else:
-            self.setPeriod(dt.timedelta(seconds=t))
+        self.setPeriod(t)
 
-    
+    @property
+    @element
+    def delay(self):
+        return ut.reduce_time(self.getDelayAfterTrigger())
 
-    
-  
+    @delay.setter
+    def delay(self, t):
+        self.setDelayAfterTrigger(t)
+
+    @property
+    @element
+    def delayl(self):
+        return ut.reduce_time(self.getDelayAfterTriggerLeft())
+
+   
     # Time
     @property
     def rx_framescaught(self):
         return element_if_equal(self.getFramesCaught())
-    
 
     @property
     def startingfnum(self):
@@ -243,10 +216,7 @@ class Detector(CppDetectorApi):
     @startingfnum.setter
     def startingfnum(self, value):
         self.setStartingFrameNumber(value)
-
-
-
-     #TODO! add txdelay
+    # TODO! add txdelay
 
     @property
     def use_receiver(self):
@@ -312,14 +282,21 @@ class Detector(CppDetectorApi):
     @property
     def rx_lastclient(self):
         return element_if_equal(self.getRxLastClientIP())
+    # FILE
 
+    @property
+    @element
+    def numinterfaces(self):
+        return self.getNumberofUDPInterfaces()
 
-    #FILE
+    @numinterfaces.setter
+    def numinterfaces(self, value):
+        self.setNumberofUDPInterfaces(value)
 
     @property
     def fformat(self):
         return element_if_equal(self.getFileFormat())
-    
+
     @fformat.setter
     def fformat(self, format):
         self.setFileFormat(format)
@@ -430,14 +407,15 @@ class Detector(CppDetectorApi):
     def zmqip(self, ip):
         self.setClientZmqIp(ip)
 
-
     @property
     def udp_dstip(self):
         return element_if_equal(self.getDestinationUDPIP())
 
     @udp_dstip.setter
     def udp_dstip(self, ip):
-        self.getDestinationUDPIP(ip)
+        if ip == "auto":
+            ip = socket.gethostbyname(self.rx_hostname)
+        self.setDestinationUDPIP(IpAddr(ip))
 
     @property
     def udp_dstip2(self):
@@ -445,7 +423,9 @@ class Detector(CppDetectorApi):
 
     @udp_dstip2.setter
     def udp_dstip2(self, ip):
-        self.getDestinationUDPIP2(ip)
+        if ip == "auto":
+            ip = socket.gethostbyname(self.rx_hostname)
+        self.setDestinationUDPIP2(IpAddr(ip))
 
     @property
     def udp_dstmac(self):
@@ -453,7 +433,7 @@ class Detector(CppDetectorApi):
 
     @udp_dstmac.setter
     def udp_dstmac(self, mac):
-        self.getDestinationUDPMAC2(mac)
+        self.setDestinationUDPMAC(MacAddr(mac))
 
     @property
     def udp_dstmac2(self):
@@ -461,8 +441,7 @@ class Detector(CppDetectorApi):
 
     @udp_dstmac2.setter
     def udp_dstmac2(self, mac):
-        self.getDestinationUDPMAC2(mac)
-
+        self.setDestinationUDPMAC2(MacAddr(mac))
 
     @property
     def udp_srcip(self):
@@ -470,7 +449,7 @@ class Detector(CppDetectorApi):
 
     @udp_srcip.setter
     def udp_srcip(self, ip):
-        self.setSourceUDPIP(ip)
+        self.setSourceUDPIP(IpAddr(ip))
 
     @property
     def udp_srcip2(self):
@@ -502,7 +481,7 @@ class Detector(CppDetectorApi):
 
     @src_udpmac.setter
     def src_udpmac(self, mac):
-        self.setSourceUDPMAC(mac)
+        self.setSourceUDPMAC(MacAddr(mac))
 
     @property
     def src_udpip2(self):
@@ -510,7 +489,7 @@ class Detector(CppDetectorApi):
 
     @src_udpip2.setter
     def src_udpip2(self, ip):
-        self.setSourceUDPIP(ip)
+        self.setSourceUDPIP(IpAddr(ip))
 
     @property
     def src_udpip(self):
@@ -518,8 +497,7 @@ class Detector(CppDetectorApi):
 
     @src_udpip.setter
     def src_udpip(self, ip):
-        self.setSourceUDPIP(ip)
-
+        self.setSourceUDPIP(IpAddr(ip))
 
     @property
     def src_udpmac2(self):
@@ -527,14 +505,14 @@ class Detector(CppDetectorApi):
 
     @src_udpmac2.setter
     def src_udpmac2(self, mac):
-        self.setSourceUDPMAC2(mac)
+        self.setSourceUDPMAC2(MacAddr(mac))
 
     @property
-    def vhighvoltage(self):
+    def highvoltage(self):
         return element_if_equal(self.getHighVoltage())
 
-    @vhighvoltage.setter
-    def vhighvoltage(self, v):
+    @highvoltage.setter
+    def highvoltage(self, v):
         self.setHighVoltage(v)
 
     @property
@@ -557,8 +535,6 @@ class Detector(CppDetectorApi):
     def rx_status(self):
         return element_if_equal(self.getReceiverStatus())
 
-
-
     @property
     def rx_udpsocksize(self):
         return element_if_equal(self.getRxUDPSocketBufferSize())
@@ -573,7 +549,7 @@ class Detector(CppDetectorApi):
 
     @property
     def trimbits(self):
-        return NotImplementedError('trimbits are set only')
+        return NotImplementedError("trimbits are set only")
 
     @trimbits.setter
     def trimbits(self, fname):
@@ -607,7 +583,6 @@ class Detector(CppDetectorApi):
     def adcreg(self):
         return self._adc_register
 
-
     @property
     def led(self):
         return element_if_equal(self.getLEDEnable())
@@ -626,13 +601,12 @@ class Detector(CppDetectorApi):
         self.setRateCorrection(tau)
 
     @property
-    def clkdivider(self):
-        res = [int(value) for value in self.getSpeed()]
-        return element_if_equal(res)
+    def speed(self):
+        return element_if_equal(self.getSpeed())
 
-    @clkdivider.setter
-    def clkdivider(self, value):
-        self.setSpeed(speedLevel(value))
+    @speed.setter
+    def speed(self, value):
+        self.setSpeed(value)
 
     @property
     def frameindex(self):
@@ -648,11 +622,11 @@ class Detector(CppDetectorApi):
 
     @property
     def timing(self):
-        return element_if_equal(self.getTimingMode()) 
+        return element_if_equal(self.getTimingMode())
 
     @timing.setter
     def timing(self, mode):
-        self.setTimingMode(mode) 
+        self.setTimingMode(mode)
 
     @property
     def trimen(self):
@@ -664,9 +638,7 @@ class Detector(CppDetectorApi):
 
     @property
     def vthreshold(self):
-        return element_if_equal(self.getDAC(dacIndex.THRESHOLD))
-
-    
+        return element_if_equal(self.getDAC(dacIndex.VTHRESHOLD, False))
 
     @property
     def type(self):
@@ -680,10 +652,27 @@ class Detector(CppDetectorApi):
     def rx_missingpackets(self):
         return element_if_equal(self.getNumMissingPackets())
 
-
     """
     Some Eiger stuff, does this have to be here or can we move it to subclass?
     """
+    @property
+    def subexptime(self):
+        res = self.getSubExptime()
+        return reduce_time(res)
+
+    @subexptime.setter
+    def subexptime(self, t):
+        self.setSubExptime(t)
+
+    @property
+    def subdeadtime(self):
+        res = self.getSubDeadTime()
+        reduce_time(res)
+
+    @subdeadtime.setter
+    def subdeadtime(self, t):
+        self.setSubDeadTime(t)
+
     @property
     def partialreset(self):
         return element_if_equal(self.getPartialReset())
@@ -695,7 +684,7 @@ class Detector(CppDetectorApi):
     @property
     def tengiga(self):
         return element_if_equal(self.getTenGiga())
-    
+
     @tengiga.setter
     def tengiga(self, value):
         self.setTenGiga(value)
@@ -743,19 +732,116 @@ class Detector(CppDetectorApi):
         return element_if_equal([it.total_seconds() for it in res])
 
 
-    @property
-    def storeinram(self):
-        return element_if_equal(self.getStoreInRamMode())
+    """
+    Jungfrau specific
+    """
 
-    @storeinram.setter
-    def storeinram(self, value):
-        self.setStoreInRamMode(value)
+    @property
+    @element
+    def auto_comp_disable(self):
+        return self.getAutoCompDisable()
+
+    @auto_comp_disable.setter
+    def auto_comp_disable(self, value):
+        self.setAutoCompDisable(value)
+
+    @property
+    @element
+    def storagecells(self):
+        return self.getNumberOfAdditionalStorageCells()
+
+    @storagecells.setter
+    def storagecells(self, n_cells):
+        self.setNumberOfAdditionalStorageCells(n_cells)
+
+    @property
+    @element
+    def storagecell_start(self):
+        return self.getStorageCellStart()
+
+    @storagecell_start.setter
+    def storagecell_start(self, value):
+        self.setStorageCellStart(value)
+
+    @property
+    @element
+    def storagecell_delay(self):
+        return ut.reduce_time(self.getStorageCellDelay())
+
+    @storagecell_delay.setter
+    def storagecell_delay(self, t):
+        self.setStorageCellDelay(t)
+
+    @property
+    @element
+    def temp_threshold(self):
+        return self.getThresholdTemperature()
+
+    @temp_threshold.setter
+    def temp_threshold(self, value):
+        self.setThresholdTemperature(value)
+
+    @property
+    @element
+    def temp_event(self):
+        return self.getTemperatureEvent()
+
+    @temp_event.setter
+    def temp_event(self, value):
+        if value != 0:
+            raise ValueError("Value needs to be 0 for reset. Setting not allowed")
+        self.resetTemperatureEvent()
+
+    @property
+    @element
+    def temp_control(self):
+        return self.getTemperatureControl()
+
+    @temp_control.setter
+    def temp_control(self, value):
+        self.setTemperatureControl(value)
+
+
+    @property
+    @element
+    def selinterface(self):
+        return self.getSelectedUDPInterface()
+
+    @selinterface.setter
+    def selinterface(self, i):
+        self.selectUDPInterface(i)
+
+    """
+    Gotthard2
+    """
+
+    @property
+    @element
+    def veto(self):
+        return self.getVeto()
+
+    @veto.setter
+    def veto(self, value):
+        self.setVeto(value)
 
 
     """
     Mythen3 specific
     """
 
+    @property
+    def gatedelay(self):
+        return reduce_time(self.getGateDelayForAllGates())
+
+    @gatedelay.setter
+    def gatedelay(self, value):
+        if is_iterable(value):
+            if len(value) == 3:
+                for i, v in enumerate(value):
+                    self.setGateDelay(i, v)
+        else:
+            self.setGateDelay(-1, value)
+
     @property
     def counters(self):
         mask = self.getCounterMask()
@@ -765,15 +851,30 @@ class Detector(CppDetectorApi):
         else:
             return [get_set_bits(m) for m in mask]
 
-
     @counters.setter
     def counters(self, values):
         self.setCounterMask(list_to_bitmask(values))
-        
+
     """
     CTB stuff 
     """
 
+    @property
+    def runclk(self):
+        return element_if_equal(self.getRUNClock())
+
+    @runclk.setter
+    def runclk(self, freq):
+        self.setRUNClock(freq)
+
+    @property
+    def romode(self):
+        return element_if_equal(self.getReadoutMode())
+
+    @romode.setter
+    def romode(self, mode):
+        self.setReadoutMode(mode)
+
     @property
     def asamples(self):
         return element_if_equal(self.getNumberOfAnalogSamples())
@@ -801,7 +902,7 @@ class Detector(CppDetectorApi):
     @property
     def dbitclk(self):
         return element_if_equal(self.getDBITClock())
-    
+
     @dbitclk.setter
     def dbitclk(self, value):
         self.setDBITClock(value)
@@ -839,9 +940,239 @@ class Detector(CppDetectorApi):
         return element_if_equal(self.getMaxADCPhaseShift())
 
     @property
-    def maxclkphaseshift(self):
-        return element_if_equal(self.getMaxClockPhaseShift())
+    def adcphase(self):
+        return element_if_equal(self.getADCPhase())
+
+    @adcphase.setter
+    def adcphase(self, value):
+        self.setADCPhase(value)
 
     @property
-    def adcphase(self):
-        return element_if_equal()
+    def adcpipeline(self):
+        return element_if_equal(self.getADCPipeline())
+
+    @adcpipeline.setter
+    def adcpipeline(self, value):
+        self.setADCPipeline(value)
+
+    @property
+    def adcclk(self):
+        return element_if_equal(self.getADCClock())
+
+    @adcclk.setter
+    def adcclk(self, value):
+        self.setADCClock(value)
+
+    @property
+    def syncclk(self):
+        return element_if_equal(self.getSYNCClock())
+
+    @property
+    def pattern(self):
+        # TODO! Clean fix
+        print("Set only")
+        return 0
+
+    # patioctrl
+    @property
+    def patioctrl(self):
+        return element_if_equal(self.getPatternIOControl())
+
+    @patioctrl.setter
+    def patioctrl(self, mask):
+        self.setPatternIOControl(mask)
+
+    @property
+    def patlimits(self):
+        return element_if_equal(self.getPatternLoopAddresses(-1))
+
+    @patlimits.setter
+    def patlimits(self, lim):
+        self.setPatternLoopAddresses(-1, lim[0], lim[1])
+
+    @property
+    def patmask(self):
+        return element_if_equal(self.getPatternMask())
+
+    @patmask.setter
+    def patmask(self, mask):
+        self.setPatternMask(mask)
+
+    @pattern.setter
+    def pattern(self, fname):
+        self.setPattern(fname)
+
+    @property
+    def patwait0(self):
+        return element_if_equal(self.getPatternWaitAddr(0))
+
+    @patwait0.setter
+    def patwait0(self, addr):
+        self.setPatternWaitAddr(0, addr)
+
+    @property
+    def patwait1(self):
+        return element_if_equal(self.getPatternWaitAddr(1))
+
+    @patwait1.setter
+    def patwait1(self, addr):
+        self.setPatternWaitAddr(1, addr)
+
+    @property
+    def patwait2(self):
+        return element_if_equal(self.getPatternWaitAddr(2))
+
+    @patwait2.setter
+    def patwait2(self, addr):
+        self.setPatternWaitAddr(2, addr)
+
+    @property
+    def patwaittime0(self):
+        return element_if_equal(self.getPatternWaitTime(0))
+
+    @patwaittime0.setter
+    def patwaittime0(self, nclk):
+        self.setPatternWaitTime(0, nclk)
+
+    @property
+    def patwaittime1(self):
+        return element_if_equal(self.getPatternWaitTime(1))
+
+    @patwaittime1.setter
+    def patwaittime1(self, nclk):
+        self.setPatternWaitTime(1, nclk)
+
+    @property
+    def patwaittime2(self):
+        return element_if_equal(self.getPatternWaitTime(2))
+
+    @patwaittime2.setter
+    def patwaittime2(self, nclk):
+        self.setPatternWaitTime(2, nclk)
+
+    @property
+    def patloop0(self):
+        return element_if_equal(self.getPatternLoopAddresses(0))
+
+    @patloop0.setter
+    def patloop0(self, addr):
+        self.setPatternLoopAddresses(0, addr[0], addr[1])
+
+    @property
+    def patloop1(self):
+        return element_if_equal(self.getPatternLoopAddresses(1))
+
+    @patloop1.setter
+    def patloop1(self, addr):
+        self.setPatternLoopAddresses(1, addr[0], addr[1])
+
+    @property
+    def patloop2(self):
+        return element_if_equal(self.getPatternLoopAddresses(2))
+
+    @patloop2.setter
+    def patloop2(self, addr):
+        self.setPatternLoopAddresses(2, addr[0], addr[1])
+
+    @property
+    def patnloop0(self):
+        return element_if_equal(self.getPatternLoopCycles(0))
+
+    @patnloop0.setter
+    def patnloop0(self, n):
+        self.setPatternLoopCycles(0, n)
+
+    @property
+    def patnloop1(self):
+        return element_if_equal(self.getPatternLoopCycles(1))
+
+    @patnloop1.setter
+    def patnloop1(self, n):
+        self.setPatternLoopCycles(1, n)
+
+    @property
+    def patnloop2(self):
+        return element_if_equal(self.getPatternLoopCycles(2))
+
+    @patnloop2.setter
+    def patnloop2(self, n):
+        self.setPatternLoopCycles(2, n)
+
+    @property
+    @element
+    def v_a(self):
+        return self.getDAC(dacIndex.V_POWER_A, True)
+
+    @v_a.setter
+    def v_a(self, value):
+        self.setDAC(dacIndex.V_POWER_A, value, True)
+
+    @property
+    @element
+    def v_b(self):
+        return self.getDAC(dacIndex.V_POWER_B, True)
+
+    @v_b.setter
+    def v_b(self, value):
+        self.setDAC(dacIndex.V_POWER_B, value, True)
+
+    @property
+    @element
+    def v_c(self):
+        return self.getDAC(dacIndex.V_POWER_C, True)
+
+    @v_c.setter
+    def v_c(self, value):
+        self.setDAC(dacIndex.V_POWER_C, value, True)
+
+    @property
+    @element
+    def v_d(self):
+        return self.getDAC(dacIndex.V_POWER_D, True)
+
+    @v_d.setter
+    def v_d(self, value):
+        self.setDAC(dacIndex.V_POWER_D, value, True)
+
+    @property
+    @element
+    def v_io(self):
+        return self.getDAC(dacIndex.V_POWER_IO, True)
+
+    @v_io.setter
+    def v_io(self, value):
+        self.setDAC(dacIndex.V_POWER_IO, value, True)
+
+    @property
+    @element
+    def v_limit(self):
+        return self.getDAC(dacIndex.V_LIMIT, True)
+
+    @v_limit.setter
+    def v_limit(self, value):
+        self.setDAC(dacIndex.V_LIMIT, value, True)
+
+    @property
+    @element
+    def im_a(self):
+        return self.getMeasuredCurrent(dacIndex.I_POWER_A)
+
+    @property
+    @element
+    def im_b(self):
+        return self.getMeasuredCurrent(dacIndex.I_POWER_B)
+
+    @property
+    @element
+    def im_c(self):
+        return self.getMeasuredCurrent(dacIndex.I_POWER_C)
+
+    @property
+    @element
+    def im_d(self):
+        return self.getMeasuredCurrent(dacIndex.I_POWER_D)
+
+    @property
+    @element
+    def im_io(self):
+        return self.getMeasuredCurrent(dacIndex.I_POWER_IO)

python/slsdet/eiger.py

@@ -11,8 +11,8 @@ from .detector import Detector
 
 # from .adcs import Adc, DetectorAdcs
 from .dacs import DetectorDacs
-import _sls_detector
-dacIndex = _sls_detector.slsDetectorDefs.dacIndex
+import _slsdet
+dacIndex = _slsdet.slsDetectorDefs.dacIndex
 from .detector_property import DetectorProperty
 # from .utils import element_if_equal
 # from sls_detector.errors import DetectorValueError, DetectorError
@@ -60,23 +60,23 @@ class EigerDacs(DetectorDacs):
     """
     Eiger specific dacs
     """
-    _dacs = [('vsvp',    dacIndex.SVP,0, 4000,    0),
-             ('vtr',     dacIndex.VTR,0, 4000, 2500),
-             ('vrf',     dacIndex.VRF,0, 4000, 3300),
-             ('vrs',     dacIndex.VRS,0, 4000, 1400),
-             ('vsvn',    dacIndex.SVN,0, 4000, 4000),
-             ('vtgstv',  dacIndex.VTGSTV,0, 4000, 2556),
-             ('vcmp_ll', dacIndex.VCMP_LL,0, 4000, 1500),
-             ('vcmp_lr', dacIndex.VCMP_LR,0, 4000, 1500),
-             ('vcall',   dacIndex.CAL,0, 4000, 4000),
-             ('vcmp_rl', dacIndex.VCMP_RL,0, 4000, 1500),
-             ('rxb_rb',  dacIndex.RXB_RB,0, 4000, 1100),
-             ('rxb_lb',  dacIndex.RXB_LB,0, 4000, 1100),
-             ('vcmp_rr', dacIndex.VCMP_RR,0, 4000, 1500),
-             ('vcp',     dacIndex.VCP,0, 4000,  200),
-             ('vcn',     dacIndex.VCN,0, 4000, 2000),
-             ('vis',     dacIndex.VIS,0, 4000, 1550),
-             ('iodelay', dacIndex.IO_DELAY,0, 4000,  660)]
+    _dacs = [('vsvp',     dacIndex.VSVP,0, 4000,    0),
+             ('vtrim',    dacIndex.VTRIM,0, 4000, 2500),
+             ('vrpreamp', dacIndex.VRPREAMP,0, 4000, 3300),
+             ('vrshaper', dacIndex.VRSHAPER,0, 4000, 1400),
+             ('vsvn',     dacIndex.VSVN,0, 4000, 4000),
+             ('vtgstv',   dacIndex.VTGSTV,0, 4000, 2556),
+             ('vcmp_ll',  dacIndex.VCMP_LL,0, 4000, 1500),
+             ('vcmp_lr',  dacIndex.VCMP_LR,0, 4000, 1500),
+             ('vcal',    dacIndex.VCAL,0, 4000, 4000),
+             ('vcmp_rl',  dacIndex.VCMP_RL,0, 4000, 1500),
+             ('rxb_rb',   dacIndex.RXB_RB,0, 4000, 1100),
+             ('rxb_lb',   dacIndex.RXB_LB,0, 4000, 1100),
+             ('vcmp_rr',  dacIndex.VCMP_RR,0, 4000, 1500),
+             ('vcp',      dacIndex.VCP,0, 4000,  200),
+             ('vcn',      dacIndex.VCN,0, 4000, 2000),
+             ('vishaper', dacIndex.VISHAPER,0, 4000, 1550),
+             ('iodelay',  dacIndex.IO_DELAY,0, 4000,  660)]
     _dacnames = [_d[0] for _d in _dacs]
 
 # # noinspection PyProtectedMember

python/slsdet/jungfrau.py

@@ -9,8 +9,8 @@ from .detector import Detector, freeze
 
 # from .adcs import Adc, DetectorAdcs
 from .dacs import DetectorDacs
-import _sls_detector
-dacIndex = _sls_detector.slsDetectorDefs.dacIndex
+import _slsdet
+dacIndex = _slsdet.slsDetectorDefs.dacIndex
 from .detector_property import DetectorProperty
 
 # @freeze

python/slsdet/lookup.py

@@ -0,0 +1,9 @@
+from .detector import Detector
+
+def view(name, det = Detector):
+    names =  find(name, det)
+    for n in names:
+        print(n)
+
+def find(name, det = Detector):
+    return [n for n in dir(det) if name.lower() in n.lower()]

python/slsdet/mythen3.py

@@ -9,53 +9,36 @@ from .detector import Detector, freeze
 
 # from .adcs import Adc, DetectorAdcs
 from .dacs import DetectorDacs
-import _sls_detector
-dacIndex = _sls_detector.slsDetectorDefs.dacIndex
+import _slsdet
+dacIndex = _slsdet.slsDetectorDefs.dacIndex
 from .detector_property import DetectorProperty
 
-# vcassh 1200, 
-# vth2 2800, 
-# vshaper 1280, 
-# vshaperneg 2800, 
-# vipre_out 1220, 
-# vth3 2800, 
-# vth1 2800, 
-# vicin 1708, 
-# vcas 1800, 
-# vpreamp 1100, 
-# vpl 1100, 
-# vipre 2624, 
-# viinsh 1708, 
-# vph 1712, 
-# vtrim 2800, 
-# vdcsh 800
-
 
 # @freeze
 class Mythen3Dacs(DetectorDacs):
     """
     Jungfrau specific DACs
     """
-    _dacs = [('vcassh',     dacIndex.CASSH,     0, 4000, 1220),
+    _dacs = [('vcassh',     dacIndex.VCASSH,     0, 4000, 1220),
              ('vth2',       dacIndex.VTH2,      0, 4000, 2800),
-             ('vshaper',    dacIndex.SHAPER1,   0, 4000, 1280),
-             ('vshaperneg', dacIndex.SHAPER2,   0, 4000, 2800),
+             ('vrshaper',   dacIndex.VRSHAPER,   0, 4000, 1280),
+             ('vrshaper_n', dacIndex.VRSHAPER_N,   0, 4000, 2800),
              ('vipre_out',  dacIndex.VIPRE_OUT, 0, 4000, 1220),
              ('vth3',       dacIndex.VTH3,      0, 4000, 2800),
-             ('vth1',       dacIndex.THRESHOLD,      0, 4000,  2800),
+             ('vth1',       dacIndex.VTH1,      0, 4000,  2800),
              ('vicin',      dacIndex.VICIN,     0, 4000,  1708),
-             ('vcas',       dacIndex.CAS,       0, 4000,  1800),
-             ('vpreamp',    dacIndex.PREAMP,    0, 4000,  1100),
-             ('vpl',        dacIndex.VPL,       0, 4000,  1100),
+             ('vcas',       dacIndex.VCAS,       0, 4000,  1800),
+             ('vrpreamp',    dacIndex.VRPREAMP,    0, 4000,  1100),
+             ('vcal_n',     dacIndex.VCAL_N,       0, 4000,  1100),
              ('vipre',      dacIndex.VIPRE,     0, 4000,  2624),
-             ('viinsh',     dacIndex.VIINSH,    0, 4000,  1708),
-             ('vph',    dacIndex.CALIBRATION_PULSE,    0, 4000,  1712),
-             ('vtrim',    dacIndex.TRIMBIT_SIZE,    0, 4000,  2800),
-             ('vdcsh',    dacIndex.VDCSH,    0, 4000,  800),
+             ('vishaper',   dacIndex.VISHAPER,    0, 4000,  1708),
+             ('vcal_p',     dacIndex.VCAL_P,    0, 4000,  1712),
+             ('vtrim',      dacIndex.VTRIM,    0, 4000,  2800),
+             ('vdcsh',      dacIndex.VDCSH,    0, 4000,  800),
             ]
     _dacnames = [_d[0] for _d in _dacs]
 
-
+#vthreshold??
 
 
 @freeze

python/slsdet/utils.py

@@ -2,12 +2,22 @@
 Utility functions that are useful for testing and troubleshooting
 but not directly used in controlling the detector
 """
+
+
 from collections import namedtuple
-import _sls_detector #C++ lib
+import _slsdet #C++ lib
 import functools
+import datetime as dt
 
 Geometry = namedtuple('Geometry', ['x', 'y'])
 
+def is_iterable(item):
+    try: 
+        iter(item)
+    except TypeError:
+        return False
+    return True
+
 def get_set_bits(mask):
     """
     Return a list of the set bits in a python integer
@@ -26,7 +36,7 @@ def list_to_bitmask(values):
     return mask
 
 def to_geo(value):
-    if isinstance(value, _sls_detector.xy):
+    if isinstance(value, _slsdet.xy):
         return Geometry(x = value.x, y = value.y)
     else:
         raise ValueError("Can only convert sls_detector.xy")
@@ -38,6 +48,9 @@ def all_equal(mylist):
 
 def element_if_equal(mylist):
     """If all elements are equal return only one element"""
+    if not is_iterable(mylist):
+        return mylist
+        
     if all_equal(mylist):
         if len(mylist) == 0:
             return None
@@ -46,6 +59,15 @@ def element_if_equal(mylist):
     else:
         return mylist
 
+def reduce_time(mylist):
+    res = element_if_equal(element_if_equal(mylist))
+    if isinstance(res, dt.timedelta):
+        return res.total_seconds()
+    elif isinstance(res[0], list):
+        return [[item.total_seconds() for item in subl] for subl in res]
+    else:
+        return [r.total_seconds() for r in res]
+
 def element(func):
     """
     Wrapper to return either list or element
@@ -65,3 +87,9 @@ def eiger_register_to_time(register):
     clocks = register >> 3
     exponent = register & 0b111
     return clocks*10**exponent / 100e6
+
+def make_timedelta(t):
+    if isinstance(t, dt.timedelta):
+           return t
+    else:
+        return dt.timedelta(seconds=t)

python/sphinx/Makefile

@@ -1,20 +0,0 @@
-# Minimal makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS    =
-SPHINXBUILD   = python -msphinx
-SPHINXPROJ    = sls_detector_tools
-SOURCEDIR     = .
-BUILDDIR      = _build
-
-# Put it first so that "make" without argument is like "make help".
-help:
-	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
-
-.PHONY: help Makefile
-
-# Catch-all target: route all unknown targets to Sphinx using the new
-# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
-%: Makefile
-	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

python/sphinx/code_quality.rst

@@ -1,134 +0,0 @@
-Code quality
-=============================
-
-For usability and reliability of the software the code needs to be high quality. For this
-project it means meeting the four criteria described below. Any addition should pass all of 
-them. 
-
-
---------------------------------
-Look, read and feel like Python
---------------------------------
-
-When using classes and functions from the 
-package it should feel like you are using Python tools and be forces
-to write C++ style code with Python syntax.
-
-::
-	
-    with xray_box.shutter_open():
-        for th in threshold:
-            d.vthreshold = th
-            d.acq()
-
-should be preferred over
-
-::
-
-    N = len(threshold)
-    xray_box.open_shutter()
-    for i in range(N):
-        d.dacs.set_dac('vthreshold', threshold[i])
-        d.acq()
-    xray_box.close_shutter()
-    
-even if the difference might seem small.
-
---------------------
-Have documentation
---------------------
-
-Classes and functions should be documented with doc-strings
-in the source code. Preferably with examples. The syntax to be used
-is numpy-sphinx.
-
-::
-
-    def function(arg):
-        """
-        This is a function that does something
-        
-        Parameters
-        ----------
-        arg: int
-            An argument
-            
-        Returns
-        --------
-        value: double
-            Returns a value
-            
-        """
-        return np.sin(arg+np.pi)
-
----------------------------------
-Pass static analysis with pylint
----------------------------------
-
-Yes, anything less than 9/10 just means that you are lazy. If 
-there is a good reason why to diverge, then we can always 
-add an exception.
-
-Currently the following additions are made:
-
- * good-names: x, y, ax, im etc. 
- * function arguments 10
- * Whitelist: numpy, _sls
-
-
-
------------------------
-Tested code
------------------------
-
-Last but not least... *actually last just because of the long list included.*
-All code that goes in should have adequate tests. If a new function does not
-have a minimum of one test it does not get added.
- 
-**Unit-tests with pytest and mocker**
-
-::
-
-    ----------- coverage: platform linux, python 3.6.4-final-0 -----------
-    Name                         Stmts   Miss  Cover
-    ------------------------------------------------
-    sls_detector/__init__.py         4      0   100%
-    sls_detector/decorators.py      14      3    79%
-    sls_detector/detector.py       461    115    75%
-    sls_detector/eiger.py          150     64    57%
-    sls_detector/errors.py           7      0   100%
-    sls_detector/jungfrau.py        59     26    56%
-    ------------------------------------------------
-    TOTAL                          695    208    70%
-
-
-    ========= 78 passed in 0.60 seconds =========
-
-
-    
-**Simple integration tests**
-
-These tests require a detector connected. Performs simple tasks like setting 
-exposure time and reading back to double check the value
-
-::
-
-    ----------- coverage: platform linux, python 3.6.4-final-0 -----------
-    Name                         Stmts   Miss  Cover
-    ------------------------------------------------
-    sls_detector/__init__.py         4      0   100%
-    sls_detector/decorators.py      14      0   100%
-    sls_detector/detector.py       461    103    78%
-    sls_detector/eiger.py          150     20    87%
-    sls_detector/errors.py           7      0   100%
-    sls_detector/jungfrau.py        59     26    56%
-    ------------------------------------------------
-    TOTAL                          695    149    79%
-
-
-    ========= 67 passed, 1 skipped in 16.66 seconds =========
-
-**Complex integration test**
-
-Typical measurements. Might require X-rays. Tests are usually evaluated from 
-plots

python/sphinx/command_line.rst

@@ -1,370 +0,0 @@
-Command line to Python
-=========================
-
-If you are already familiar with the command line interface to the
-slsDetectorSoftware here is a quick reference translating to Python commands
-
-
- .. note ::
-
-     Commands labeled Mythen only  or Gotthard only are currently not implemented in the
-     Python class. If you need this functionallity please contact the SLS Detector Group
-
-.. py:currentmodule:: sls_detector
-
-.. |ro| replace:: *(read only)*
-.. |free| replace:: :py:func:`Detector.free_shared_memory`
-.. |sub| replace:: :py:attr:`Detector.sub_exposure_time`
-.. |mg| replace:: Mythen and Gotthard only
-.. |g| replace:: Gotthard only
-.. |m| replace:: Mythen only
-.. |msp| replace:: :py:attr:`Detector.measured_subperiod`
-.. |new_chiptest| replace:: New chip test board only
-.. |chiptest| replace:: Chip test board only
-.. |dr| replace::  :py:attr:`Detector.dynamic_range`
-.. |j| replace:: Jungfrau only
-.. |te| replace:: :py:attr:`Detector.trimmed_energies`
-.. |temp_fpgaext| replace:: :py:attr:`Detector.temp`.fpgaext
-.. |epa| replace:: :py:func:`Eiger.pulse_all_pixels`
-.. |rfc| replace:: :py:func:`Detector.reset_frames_caught`
-.. |rfi| replace:: :py:attr:`Detector.receiver_frame_index`
-.. |ron| replace:: :py:attr:`Detector.receiver_online`
-.. |flipy| replace:: :py:attr:`Detector.flipped_data_y`
-.. |flipx| replace:: :py:attr:`Detector.flipped_data_x`
-.. |adcr| replace:: :py:func:`DetectorApi.writeAdcRegister`
-.. |sb| replace:: :py:func:`DetectorApi.setBitInRegister`
-.. |cb| replace:: :py:func:`DetectorApi.clearBitInRegister`
-.. |tempth| replace:: :py:attr:`Jungfrau.temperature_threshold`
-.. |tempev| replace:: :py:attr:`Jungfrau.temperature_event`
-.. |tempco| replace:: :py:attr:`Jungfrau.temperature_control`
-.. |depr| replace:: *Deprecated/Internal*
-.. |nimp| replace:: *Not implemented*
-.. |rudp| replace:: :py:attr:`Detector.rx_realudpsocksize`
-.. |lci| replace:: :py:attr:`Detector.last_client_ip`
-.. |rlci| replace:: :py:attr:`Detector.receiver_last_client_ip`
-.. |fdp| replace:: :py:attr:`Detector.frame_discard_policy`
-.. |apic| replace:: :py:attr:`Detector.api_compatibility`
-
-
-------------------------
-Commands
-------------------------
-
-===================== ===================================== ================== =========
-Command               Python                                Implementation     Tests
-===================== ===================================== ================== =========
-sls_detector_acquire  :py:func:`Detector.acq`                OK                 OK
-test                  |depr|                                 \-                 \-
-help                  help(Detector.acq)                     \-                 \-
-exitserver            |depr|                                 \-                 \-
-exitreceiver          |depr|                                 \-                 \-
-flippeddatay          |flipy|                                OK                 \-
-digitest              |depr|                                 \-                 \-
-bustest               |depr|                                 \-                 \-
-digibittest           Which detector?                        \-                 \-
-reg                   :py:attr:`Detector.register`           OK                 \-
-adcreg                |adcr|                                 OK                 \-
-setbit                |sb|                                   OK                 \-
-clearbit              |cb|                                   OK                 \-
-getbit                |nimp|                                 \-                 \-
-r_compression         Not implemented in receiver            \-                 \-
-acquire               :py:func:`Detector.acq`                OK                 \-
-busy                  :py:attr:`Detector.busy`               OK                 Partial
-status                :py:attr:`Detector.status`             OK |ro|            \-
-status start          :py:func:`Detector.start_detector`     OK                 \-
-status stop           :py:func:`Detector.stop_detector`      OK                 \-
-data                  |depr|                                 \-                 \-
-frame                 |depr|                                 \-                 \-
-readctr               |g|                                    \-                 \-
-resetctr              |g|                                    \-                 \-
-resmat                :py:attr:`Eiger.eiger_matrix_reset`    OK                 OK
-free                  |free|                                 OK                 \-
-hostname              :py:attr:`Detector.hostname`           OK                 OK
-add                   |nimp|                                 \-                 \-
-replace               |nimp|                                 \-                 \-
-user                  |nimp|                                 \-                 \-
-master                |nimp|                                 \-                 \-
-sync                  Which detector?                        \-                 \-
-online                :py:attr:`Detector.online`             OK                 \-
-checkonline           |nimp|                                 \-                 \-
-activate              :py:attr:`Eiger.active`                \-                 \-
-nmod                  :py:attr:`Detector.n_modules`          OK                 \-
-maxmod                |depr|                                 \-                 \-
-dr                    |dr|                                   OK                 OK
-roi                   |g|                                    \-                 \-
-detsizechan           :py:attr:`Detector.image_size`         OK                 \-
-roimask               |nimp|                                 \-                 \-
-flippeddatax          |flipx|                                OK                 \-
-tengiga               :py:attr:`Eiger.tengiga`               OK                 \-
-gappixels             :py:attr:`Eiger.add_gappixels`         OK                 \-
-flags                 :py:attr:`Detector.flags`              OK                 \-
-extsig                |mg|                                   \-                 \-
-programfpga           |j|                                    \-                 \-
-resetfpga             |j|                                    \-                 \-
-powerchip             :py:attr:`Jungfrau.powerchip`          \-                 \-
-led                   |nimp|                                 \-                 \-
-auto_comp_disable     |j|                                    \-                 \-
-pulse                 Used in |epa|                          OK                 \-
-pulsenmove            Used in |epa|                          OK                 \- 
-pulsechip             :py:func:`Eiger.pulse_chip`            OK                 \-
-checkdetversion       |apic|                                 \-                 \-
-checkrecversion       |apic|                                 \-                 \-
-moduleversion         |m|                                    \-                 \-
-detectornumber        :py:attr:`Detector.detector_number`    OK                 \-
-modulenumber          |m|                                    \-                 \-
-detectorversion       :py:attr:`Detector.firmware_version`   OK                 OK
-softwareversion       :py:attr:`Detector.server_version`     \-                 \-
-thisversion           :py:attr:`Detector.client_version`     Reads date         \-
-receiverversion       :py:attr:`Detector.receiver_version`   Reads date         \-
-timing                :py:attr:`Detector.timing_mode`        OK                 \-
-exptime               :py:attr:`Detector.exposure_time`      OK                 OK
-subexptime            |sub|                                  OK                 OK
-period                :py:attr:`Detector.period`             OK                 OK
-subdeadtime           :py:attr:`Eiger.sub_deadtime`          OK                 OK
-delay                 :py:attr:`Jungfrau.delay`              OK                 \-
-gates                 :py:attr:`Jungfrau.n_gates`            OK                 \-
-frames                :py:attr:`Detector.n_frames`           OK                 OK
-cycles                :py:attr:`Detector.n_cycles`           OK                 \-
-probes                :py:attr:`Jungfrau.n_probes`           OK                 \-
-measurements          :py:attr:`Detector.n_measurements`     OK                 \-
-samples               Chip test board only (new?)            \-                 \-
-storagecells          :py:attr:`Jungfrau.n_storagecells`     OK                 \-
-storagecell_start     :py:attr:`Jungfrau.storagecell_start`  OK                 \-
-exptimel              |mg|                                   \-                 \-
-periodl               |mg|                                   \-                 \-
-delayl                |mg|                                   \-                 \-
-gatesl                |mg|                                   \-                 \-
-framesl               |mg|                                   \-                 \-
-cyclesl               |mg|                                   \-                 \-
-probesl               |mg|                                   \-                 \-
-now                   |nimp|                                 \-                 \-
-timestamp             |m|                                    \-                 \-
-nframes               |nimp|                                 \-                 \-
-measuredperiod        :py:attr:`Detector.measured_period`    OK                 \-
-measuredsubperiod     |msp|                                  \-                 \-
-clkdivider            :py:attr:`Detector.readout_clock`      OK                 OK
-setlength             |m|                                    \-                 \-
-waitstates            |m|                                    \-                 \-
-totdivider            |m|                                    \-                 \-
-totdutycycle          |m|                                    \-                 \-
-phasestep             |g|                                    \-                 \-
-oversampling          |new_chiptest|                         \-                 \-
-adcclk                |new_chiptest|                         \-                 \-
-adcphase              |new_chiptest|                         \-                 \-
-adcpipeline           |new_chiptest|                         \-                 \-
-dbitclk               |new_chiptest|                         \-                 \-
-dbitphase             |new_chiptest|                         \-                 \-
-dbitpipeline          |new_chiptest|                         \-                 \-
-config                :py:func:`Detector.load_config`        OK                 \-
-rx_printconfig        |nimp|                                 \-                 \-
-parameters            :py:func:`Detector.load_parameters`    OK                 \-
-setup                 |nimp|                                 \-                 \-
-flatfield             |nimp|                                 \-                 \-
-ffdir                 |nimp|                                 \-                 \-
-ratecorr              :py:attr:`Detector.rate_correction`    OK                 \-
-badchannels           |nimp|                                 \-                 \-
-angconv               |m|                                    \-                 \-
-globaloff             |nimp|                                 \-                 \-
-fineoff               |nimp|                                 \-                 \-
-binsize               |nimp|                                 \-                 \-
-angdir                |nimp|                                 \-                 \-
-moveflag              |nimp|                                 \-                 \-
-samplex               |nimp|                                 \-                 \-
-sampley               |nimp|                                 \-                 \-
-threaded              :py:attr:`Detector.threaded`           OK                 \-
-darkimage             |nimp|                                 \-                 \-
-gainimage             |nimp|                                 \-                 \-
-settingsdir           :py:attr:`Detector.settings_path`      OK                 \-
-trimdir               |nimp|                                 \-                 \-
-caldir                |nimp|                                 \-                 \-
-trimen                :py:attr:`Detector.trimmed_energies`   OK                 \-
-settings              :py:attr:`Detector.settings`           OK                 \-
-threshold             :py:attr:`Detector.threshold`          OK                 \-
-thresholdnotb         |nimp|                                 \-                 \-
-trimbits              :py:func:`Detector.load_trimbits`      OK                 \-
-trim                  |nimp|                                 \-                 \-
-trimval               :py:attr:`Detector.trimbits`           OK                 OK
-pedestal              |nimp|                                 \-                 \-
-vthreshold            :py:attr:`Detector.vthreshold`         OK                 \-
-vcalibration          |nimp|                                 \-                 \-
-vtrimbit              |nimp|                                 \-                 \-
-vpreamp               |nimp|                                 \-                 \-
-vshaper1              |nimp|                                 \-                 \-
-vshaper2              |nimp|                                 \-                 \-
-vhighvoltage          :py:attr:`Detector.high_voltage`       OK                 \-
-vapower               |nimp|                                 \-                 \-
-vddpower              |nimp|                                 \-                 \-
-vshpower              |nimp|                                 \-                 \-
-viopower              |nimp|                                 \-                 \-
-vref_ds               :py:attr:`Jungfrau.dacs.vref_ds`       OK                 \-
-vcascn_pb             |nimp|                                 \-                 \-
-vcascp_pb             |nimp|                                 \-                 \-
-vout_cm               |nimp|                                 \-                 \-
-vcasc_out             |nimp|                                 \-                 \-
-vin_cm                |nimp|                                 \-                 \-
-vref_comp             |nimp|                                 \-                 \-
-ib_test_c             |nimp|                                 \-                 \-
-dac0                  |nimp|                                 \-                 \-
-dac1                  |nimp|                                 \-                 \-
-dac2                  |nimp|                                 \-                 \-
-dac3                  |nimp|                                 \-                 \-
-dac4                  |nimp|                                 \-                 \-
-dac5                  |nimp|                                 \-                 \-
-dac6                  |nimp|                                 \-                 \-
-dac7                  |nimp|                                 \-                 \-
-vsvp                  :py:attr:`Eiger.dacs.vsvp`             OK                 \-
-vsvn                  :py:attr:`Eiger.dacs.vsvn`             OK                 \- 
-vtr                   :py:attr:`Eiger.dacs.vtr`              OK                 \-
-vrf                   :py:attr:`Eiger.dacs.vrf`              OK                 \-
-vrs                   :py:attr:`Eiger.dacs.vrs`              OK                 \-
-vtgstv                :py:attr:`Eiger.dacs.vtgstv`           OK                 \-
-vcmp_ll               :py:attr:`Eiger.dacs.vcmp_ll`          OK                 \-
-vcmp_ll               :py:attr:`Eiger.dacs.vcmp_ll`          OK                 \-
-vcall                 :py:attr:`Eiger.dacs.vcall`            OK                 \-
-vcmp_rl               :py:attr:`Eiger.dacs.vcmp_rl`          OK                 \-
-vcmp_rr               :py:attr:`Eiger.dacs.vcmp_rr`          OK                 \-
-rxb_rb                :py:attr:`Eiger.dacs.rxb_rb`           OK                 \-
-rxb_lb                :py:attr:`Eiger.dacs.rxb_lb`           OK                 \-
-vcp                   :py:attr:`Eiger.dacs.vcp`              OK                 \-
-vcn                   :py:attr:`Eiger.dacs.vcn`              OK                 \-
-vis                   :py:attr:`Eiger.dacs.vis`              OK                 \-
-iodelay               :py:attr:`Eiger.dacs.iodelay`          OK                 \-
-dac                   |nimp|                                 \-                 \-
-adcvpp                |nimp|                                 \-                 \-
-v_a                   |nimp|                                 \-                 \-
-v_b                   |nimp|                                 \-                 \- 
-v_c                   |nimp|                                 \-                 \-  
-v_d                   |nimp|                                 \-                 \- 
-v_io                  |nimp|                                 \-                 \- 
-v_chip                |nimp|                                 \-                 \- 
-v_limit               |nimp|                                 \-                 \- 
-vIpre                 |nimp|                                 \-                 \- 
-VcdSh                 |nimp|                                 \-                 \- 
-Vth1                  |nimp|                                 \-                 \- 
-Vth2                  |nimp|                                 \-                 \- 
-Vth3                  |nimp|                                 \-                 \- 
-VPL                   |nimp|                                 \-                 \- 
-Vtrim                 |nimp|                                 \-                 \- 
-vIbias                |nimp|                                 \-                 \- 
-vIinSh                |nimp|                                 \-                 \- 
-cas                   |nimp|                                 \-                 \- 
-casSh                 |nimp|                                 \-                 \- 
-vIbiasSh              |nimp|                                 \-                 \- 
-vIcin                 |nimp|                                 \-                 \- 
-vIpreOut              |nimp|                                 \-                 \- 
-temp_adc              |nimp|                                 \-                 \- 
-temp_fpga             :py:attr:`Detector.temp`.fpga          OK                 \- 
-temp_fpgaext          |temp_fpgaext|                         OK                 \- 
-temp_10ge             :py:attr:`Detector.temp`.t10ge         OK                 \- 
-temp_dcdc             :py:attr:`Detector.temp`.dcdc          OK                 \- 
-temp_sodl             :py:attr:`Detector.temp`.sodl          OK                 \- 
-temp_sodr             :py:attr:`Detector.temp`.sodr          OK                 \- 
-adc                   |nimp|                                 \-                 \- 
-temp_fpgafl           :py:attr:`Detector.temp`.fpgafl        OK                 \- 
-temp_fpgafr           :py:attr:`Detector.temp`.fpgafr        OK                 \- 
-i_a                   |nimp|                                 \-                 \-        
-i_b                   |nimp|                                 \-                 \-        
-i_c                   |nimp|                                 \-                 \-        
-i_d                   |nimp|                                 \-                 \-        
-i_io                  |nimp|                                 \-                 \-        
-vm_a                  |nimp|                                 \-                 \-        
-vm_b                  |nimp|                                 \-                 \-        
-vm_c                  |nimp|                                 \-                 \-        
-vm_d                  |nimp|                                 \-                 \-        
-vm_io                 |nimp|                                 \-                 \-        
-temp_threshold        |tempth|                               \-                 \-                        
-temp_control          |tempco|                               \-                 \-  
-temp_event            |tempev|                               \-                 \-  
-outdir                :py:attr:`Detector.file_path`          OK                 OK
-fname                 :py:attr:`Detector.file_name`          OK                 OK
-index                 :py:attr:`Detector.file_index`         OK                 OK
-enablefwrite          :py:attr:`Detector.file_write`         OK                 OK
-overwrite             :py:attr:`Detector.file_overwrite`     OK                 \-
-currentfname          |nimp|                                 \-                 \-      
-fileformat            :py:attr:`Detector.file_format`        OK                 \-
-positions             |depr|                                 \-                 \-
-startscript           |depr|                                 \-                 \-
-startscriptpar        |depr|                                 \-                 \-
-stopscript            |depr|                                 \-                 \-
-stopscriptpar         |depr|                                 \-                 \-
-scriptbefore          |depr|                                 \-                 \-
-scriptbeforepar       |depr|                                 \-                 \-
-scriptafter           |depr|                                 \-                 \-
-scriptafterpar        |depr|                                 \-                 \-
-headerafter           |depr|                                 \-                 \-
-headerbefore          |depr|                                 \-                 \-
-headerbeforepar       |depr|                                 \-                 \-
-headerafterpar        |depr|                                 \-                 \-
-encallog              |depr|                                 \-                 \-
-angcallog             |depr|                                 \-                 \-
-scan0script           |depr|                                 \-                 \-
-scan0par              |depr|                                 \-                 \-
-scan0prec             |depr|                                 \-                 \-
-scan0steps            |depr|                                 \-                 \-
-scan0range            |depr|                                 \-                 \-
-scan1script           |depr|                                 \-                 \-
-scan1par              |depr|                                 \-                 \-
-scan1prec             |depr|                                 \-                 \-
-scan1steps            |depr|                                 \-                 \-
-scan1range            |depr|                                 \-                 \-
-rx_hostname           :py:attr:`Detector.rx_hostname`        OK                 \-
-rx_udpip              :py:attr:`Detector.rx_udpip`           OK                 \-
-rx_udpmac             :py:attr:`Detector.rx_udpmac`          OK                 \-
-rx_udpport            :py:attr:`Detector.rx_udpport`         OK                 \-
-rx_udpport2           :py:attr:`Detector.rx_udpport`         OK                 \-
-rx_udpsocksize        :py:attr:`Detector.rx_udpsocksize`     OK                 \-
-rx_realudpsocksize    |rudp|                                 OK
-detectormac           :py:attr:`Detector.detector_mac`       OK                 \-
-detectorip            :py:attr:`Detector.detector_ip`        OK                 \-
-txndelay_left         :py:attr:`Eiger.delay`.left            OK                 \-
-txndelay_right        :py:attr:`Eiger.delay`.right           OK                 \-
-txndelay_frame        :py:attr:`Eiger.delay`.frame           OK                 \-
-flowcontrol_10g       :py:attr:`Eiger.flowcontrol_10g`       OK                 \-
-zmqport               :py:attr:`Detector.client_zmqport`     Read               \- 
-rx_zmqport            :py:attr:`Detector.rx_zmqport`         Read               \-
-rx_datastream         :py:attr:`Detector.rx_datastream`      OK                 \-
-zmqip                 :py:attr:`Detector.client_zmqip`       OK                 \- 
-rx_zmqip              :py:attr:`Detector.rx_zmqip`           Read               \-
-rx_jsonaddheader      :py:attr:`Detector.rx_jsonaddheader`   OK                 \- 
-configuremac          :py:attr:`Detector.config_network`     OK                 \-
-rx_tcpport            :py:attr:`Detector.rx_tcpport`    
-port                  |nimp|                                 \-                 \- 
-stopport              |nimp|                                 \-                 \- 
-lock                  :py:attr:`Detector.lock`               OK                 \-
-lastclient            :py:attr:`Detector.last_client_ip`     OK                 \-
-receiver start        :py:func:`Detector.start_receiver`     OK                 \-   
-receiver stop         :py:func:`Detector.stop_receiver`      \-                 \-  
-r_online              |ron|                                  OK                 \-
-r_checkonline         |nimp|                                 \-                 \-   
-framescaught          :py:attr:`Detector.frames_caught`      OK                 \-
-resetframescaught     |rfc|                                  OK                 \-
-frameindex            |rfi|                                  OK                 \-
-r_lock                :py:attr:`Detector.lock_receiver`      OK                 \-
-r_lastclient          |rlci|                                 OK                 \-
-r_readfreq            |nimp|                                 \-                 \- 
-rx_fifodepth          :py:attr:`Detector.rx_fifodepth`       OK                 \-
-r_silent              |nimp|                                 \-                 \- 
-r_framesperfile       :py:attr:`Detector.n_frames_per_file`  OK                 \-
-r_discardpolicy       |fdp|                                  OK                 \-
-r_padding             :py:attr:`Detector.file_padding`       OK                 \-
-adcinvert             |chiptest|                             \-                 \-
-adcdisable            |chiptest|                             \-                 \-
-pattern               |chiptest|                             \-                 \-
-patword               |chiptest|                             \-                 \-
-patioctrl             |chiptest|                             \-                 \-
-patclkctrl            |chiptest|                             \-                 \-
-patlimits             |chiptest|                             \-                 \-
-patloop0              |chiptest|                             \-                 \-
-patnloop0             |chiptest|                             \-                 \-
-patwait0              |chiptest|                             \-                 \-
-patwaittime0          |chiptest|                             \-                 \-
-patloop1              |chiptest|                             \-                 \-
-patnloop1             |chiptest|                             \-                 \-
-patwait1              |chiptest|                             \-                 \-
-patwaittime1          |chiptest|                             \-                 \-
-patloop2              |chiptest|                             \-                 \-
-patnloop2             |chiptest|                             \-                 \-
-patwait2              |chiptest|                             \-                 \-
-patwaittime2          |chiptest|                             \-                 \-
-dut_clk               |chiptest|                             \-                 \-
-===================== ===================================== ================== =========   

python/sphinx/conf.py

@@ -1,178 +0,0 @@
-#!/usr/bin/env python3
-# -*- coding: utf-8 -*-
-#
-# sls_detector_tools documentation build configuration file, created by
-# sphinx-quickstart on Wed Nov  1 10:17:29 2017.
-#
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-#
-import os
-import sys
-sys.path.insert(0, os.path.abspath('..'))
-
-
-# -- General configuration ------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-#
-# needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be
-# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
-# ones.
-extensions = ['sphinx.ext.autodoc',
-              'sphinx.ext.doctest',
-              'sphinx.ext.coverage',
-              'sphinx.ext.mathjax',
-              'sphinx.ext.viewcode',
-              'sphinx.ext.napoleon',
-              'sphinx.ext.todo',
-              'sphinx.ext.autosummary']
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix(es) of source filenames.
-# You can specify multiple suffix as a list of string:
-#
-# source_suffix = ['.rst', '.md']
-source_suffix = '.rst'
-
-# The master toctree document.
-master_doc = 'index'
-
-# General information about the project.
-project = 'sls_detector'
-copyright = '2019, Sls Detector Group'
-author = 'Erik Frojdh'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = '4.0.1'
-# The full version, including alpha/beta/rc tags.
-release = '4.0.1'
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#
-# This is also used if you do content translation via gettext catalogs.
-# Usually you set "language" from the command line for these cases.
-language = None
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-# This patterns also effect to html_static_path and html_extra_path
-exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# If true, `todo` and `todoList` produce output, else they produce nothing.
-todo_include_todos = True
-
-
-# -- Options for HTML output ----------------------------------------------
-
-# The theme to use for HTML and HTML Help pages.  See the documentation for
-# a list of builtin themes.
-#
-html_theme = "sphinx_rtd_theme"
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-#
-# html_theme_options = {}
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['_static']
-
-# Custom sidebar templates, must be a dictionary that maps document names
-# to template names.
-#
-# This is required for the alabaster theme
-# refs: http://alabaster.readthedocs.io/en/latest/installation.html#sidebars
-html_sidebars = {
-    '**': [
-        'about.html',
-        'navigation.html',
-        'relations.html',  # needs 'show_related': True theme option to display
-        'searchbox.html',
-        'donate.html',
-    ]
-}
-
-
-# -- Options for HTMLHelp output ------------------------------------------
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'sls_detector_doc'
-napoleon_use_ivar = True
-
-# -- Options for LaTeX output ---------------------------------------------
-
-latex_elements = {
-    # The paper size ('letterpaper' or 'a4paper').
-    #
-    # 'papersize': 'letterpaper',
-
-    # The font size ('10pt', '11pt' or '12pt').
-    #
-    # 'pointsize': '10pt',
-
-    # Additional stuff for the LaTeX preamble.
-    #
-    # 'preamble': '',
-
-    # Latex figure (float) alignment
-    #
-    # 'figure_align': 'htbp',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title,
-#  author, documentclass [howto, manual, or own class]).
-latex_documents = [
-    (master_doc, 'sls_detector.tex', 'sls_detector Documentation',
-     'Erik Frojdh', 'manual'),
-]
-
-
-# -- Options for manual page output ---------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    (master_doc, 'sls_detector_tools', 'sls_detector_tools Documentation',
-     [author], 1)
-]
-
-
-# -- Options for Texinfo output -------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-#  dir menu entry, description, category)
-texinfo_documents = [
-    (master_doc, 'py_sls', 'py_sls Documentation',
-     author, 'py_sls', 'One line description of project.',
-     'Miscellaneous'),
-]
-
-

python/sphinx/cpp_api.rst

@@ -1,12 +0,0 @@
-C++ API
-=====================================================
-
-
-.. py:currentmodule:: _sls_detector
-
-.. autoclass:: DetectorApi
-    :members:  
-    :undoc-members:
-
-
-

python/sphinx/error-handling.rst

@@ -1,67 +0,0 @@
-Error handling
-=========================
-
-
-Check input in Python
-----------------------
-
-As far as possible we try to check the input on the Python side
-before calling the slsDeteectorsSoftware. Errors should not pass
-silently but raise an exception
-
-::
-
-    #Trimbit range for Eiger is 0-63
-    detector.trimbits = 98
-    (...)
-    ValueError: Trimbit setting 98 is  outside of range:0-63
-    
-Errors in slsDetectorsSoftware
--------------------------------
-
-The slsDetectorsSoftware uses a mask to record errors from the different
-detectors. If an error is found we raise a RuntimeError at the end of the 
-call using the error message from slsDetectorsSoftware
-
-.. todo ::
-
-    Implement this for all functions
-
-::
-
-    detector.settings = 'bananas'
-    (...)
-    RuntimeError: Detector 0:
-    Could not set settings.
-    Detector 1:
-    Could not set settings.
-    Detector 2:
-    Could not set settings.
-    
-    
-Using decorators
--------------------
-
-Using decorators we can reset the error mask before the command and then 
-check it after the command
-
-.. code-block:: python
-
-    #add decorator to check the error mask
-    @error_handling
-    def some_function():
-        a = 1+1
-        return a
-
-Communication with the detector is usually the biggest overhead so 
-this does not impact performance. 
-
-::
-
-    %timeit d.exposure_time
-    >> 1.52 ms ± 5.42 µs per loop (mean ± std. dev. of 7 runs, 1000 loops each)
-
-    %timeit d.decorated_exposure_time
-    >> 1.53 ms ± 3.18 µs per loop (mean ± std. dev. of 7 runs, 1000 loops each)
-
-

python/sphinx/getting_started.rst

@@ -1,122 +0,0 @@
-Getting started
-================
-
-
-------------------------
-Setting up the detector
-------------------------
-        
-All configuration of the detector can either be done from the Python
-API (including loading config file) or externally. The detector setup is
-discovered from the shared memory when launching a new script. Because the
-detector usually should remain online longer than a specific script it is
-recommended to run the receivers seperate.
-        
----------------------------------
-Setting and getting attributes
----------------------------------        
-
-Most of the detector and software setting are implemented as attributes
-in the Detector class. When something is assigned it is also set 
-in the detector and when the attribute is called using dot notation it
-it looked up from the detector.
-
-::
-
-    #Currently Eiger and Jungfrau but Detector should work for all
-    from sls_detector import Eiger()
-    d = Eiger()
-    
-    d.file_write = True
-    d.vthreshold = 1500
-    
-    d.frame_index
-    >> 12
-    
-    d.file_name
-    >> 'run'
-    
----------------------------------
-Working with DACs
----------------------------------  
-
-The following examples assumes an Eiger500k detector. But the same syntax
-works for other detector sizes and models.
-
-::
-
-    d.dacs
-    >>
-    ========== DACS =========
-    vsvp      :     0,     0
-    vtr       :  4000,  4000
-    vrf       :  2000,  2300
-    vrs       :  1400,  1400
-    vsvn      :  4000,  4000
-    vtgstv    :  2556,  2556
-    vcmp_ll   :  1500,  1500
-    vcmp_lr   :  1500,  1500
-    vcall     :  3500,  3600
-    vcmp_rl   :  1500,  1500
-    rxb_rb    :  1100,  1100
-    rxb_lb    :  1100,  1100
-    vcmp_rr   :  1500,  1500
-    vcp       :  1500,  1500
-    vcn       :  2000,  2000
-    vis       :  1550,  1550
-    iodelay   :   660,   660
-    
-    #Read dac values to a variable
-    vrf = d.dacs.vrf[:]
-    
-    #Set a dac in a module
-    d.dacs.vrf[0] = 1500
-    d.dacs.vrf[0]
-    >> 1500
-    
-    #Set vrf to the same value in all moduels
-    d.dacs.vrf = 1500
-    
-    #Set a dac using an iterable
-    d.dacs.vrf = [1500, 1600]
-    d.dacs.vrf
-    >> vrf       :  1500,  1600
-    
-    #Set dacs iterating on index and values
-    d.dacs.vrf[0,1] = 1300,1400
-
-
----------------------------------
-Operating multiple detectors
----------------------------------
-
-Operating multiple detectors is supported by assigning an id when creating the object. If no id is
-set it defaults to 0.
-
-::
-
-    d0 = Eiger() #id is now 0
-    d1 = Jungfrau(1)
-
-    #Or explicitly
-    d1 = Jungfrau(id = 0)
-
-The detectors now operate independently of each other but can be synchronized using a hardware trigger.
-
-::
-
-    from sls_detector import Eiger
-
-    d0 = Eiger(0)
-    d1 = Eiger(1)
-
-    d0.load_config('/some/path/T45.config')
-    d1.load_config('/some/path/T62.config')
-
-    d0.n_frames = 1
-    d0.exposure_time = 1
-    d0.timing_mode = 'trigger'
-
-    d1.n_frames = 5
-    d1.exposure_time = 0.2
-    d1.timing_mode = 'trigger'

python/sphinx/index.rst

@@ -1,30 +0,0 @@
-sls_detector - Python interface for the slsDetectorsPackage
-==============================================================
-
-sls_detector provide Python bindings to the slsDetectorsPackage using mainly the 
-multiSlsDetector API. This module contains two parts, a compiled C module to
-expose the API and a Python class to offer a more Pythonic interface.
-
-
-.. toctree::
-   :maxdepth: 3
-   :caption: Contents:
-
-   installation
-   getting_started
-   code_quality
-   command_line
-   examples
-   error-handling
-   
-   sls_detector
-   cpp_api
-
-
-
-Indices and tables
-==================
-
-* :ref:`genindex`
-* :ref:`modindex`
-* :ref:`search`

python/sphinx/installation.rst

@@ -1,90 +0,0 @@
-Installation
-=========================
-
-The easiest way to install the Python API and the slsDetectorPackage is using conda. But other
-methods are also available. 
-
----------------------
-Install using conda
----------------------
-If you don't have it installed get the latest version of `Miniconda`_
-
-.. _Miniconda: https://conda.io/miniconda.html
-
-::
-
-    wget https://repo.continuum.io/miniconda/Miniconda3-latest-Linux-x86_64.sh
-    sh Miniconda3-latest-Linux-x86_64.sh
-
-
-Install sls_detector and sls_detector_lib using:
-
-::
-
-    #Add conda channels
-    conda config --add channels conda-forge
-    conda config --add channels slsdetectorgroup
-
-    #Install latest version
-    conda install sls_detector
-
-    #Install specific version
-    conda install sls_detector=3.0.1
-
-------------------------------
-Local build using conda-build
-------------------------------
-
-Needs the `sls_detector_lib`_ installed  in order to automatically find headers
-and shared libraries. Make sure that the branch of sls_detector matches the lib 
-version installed. 
-
-.. _sls_detector_lib: https://github.com/slsdetectorgroup/sls_detector_lib
-
-::
-
-    #Clone source code
-    git clone https://github.com/slsdetectorgroup/sls_detector.git
-
-    #Checkout the branch needed
-    git checkout 3.0.1
-
-    #Build and install the local version
-    conda-build sls_detector
-    conda install --use-local sls_detector
-
-
------------------------
-Developer build
------------------------
-
-IF you if you are developing and are making constant changes to the code it's a bit cumbersome
-to build with conda and install. Then an easier way is to build the C/C++ parts in the package
-directory and temporary add this to the path
-
-::
-
-    #in path/to/sls_detector
-    python setup.py build_ext --inplace
-
-Then in your Python script
-
-::
-
-    import sys
-    sys.path.append('/path/to/sls_detector')
-    from sls_detector import Detector
-
-
-
---------------
-Prerequisites
---------------
-
-All dependencies are manged trough conda but for a stand alone build you would need
-
- * gcc 4.8+
- * Qwt 6
- * Qt 4.8
- * numpy
- * slsDetectorPackage