* introduced new type Hz, typetraits, String conversions, command generation (not yet generated)
* incorrect unit typo
* cmd generation and compiles
* default to MHz, removed space between units for consistency with timers, min and max checks for clks
* in python, but need to change the default to Hz again for clean code and intuition
* allow ints, doubles, implicit conversions
* dont allow raw ints, doubles and implicit conversions
* fixed tests
* added operators for Hz in python
* fix test for min clk for xilinx ctb
* fix test
* fix python tests
* fixed xilinx period and default clks
* test fix
* removed the 3 clock cycle check for ctb and implemented properly the max adc clk frq for altera ctb
* removing 3 clock cycle code from xilinx as well
* formatting
* loadpattern before 3 clk cycles code
* actualtime and measurement time to be implemented in 100ns already in fw
* fix tests
* pyzmq dependency forthe tests
* fixed pyctbgui for freq
* updated binaries and fixed a warning by moving the usleep_bf to blackfin.c
* suppressed warnings
* cleaned up docs
* renamed function
---------
Co-authored-by: Alice <alice.mazzoleni@psi.ch>
* testing matterhorn1 SPI on altera CTB, works for dummy-chip
* added bf_usleep with proper timing for blackfin
* simplified spi firmware interface, removed write and readstrobe
* define constant for BFIN spi sleep
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
* not allowing power names for dac names to prevent duplicate names
* wip
* v_abcd commands should be removed to prevent unintentional usage and throw with a suggestion command for dac and power
* binary in
* dacs with power dac names should work and do not take in dac units to avoid ambiguity, test with 0 value for power dacs should fail, to do: implement power commands
* wip: power in client, tests, and fixed server interfaces and ctb implementation, not tested
* wip. client and xilinx todo
* wip: ctb power works, tests left
* fixed some tests
* added vchip check
* python cmds still left. wip
* fixed xilinx. python left
* wip
* wip. xilinx
* fixed powerchip for ctb
* power all returns all
* configtransceiver is removed
* wip python
* wip
* wip
* wip
* wip
* wip
* wip
* wip xilinx
* wip
* wip
* wip
* pybindings
* fix getdacindex and getdacname for normal detectors to throw if random index that doesnt fit to the detector
* wip
* fixed tests
* fixes for python api
* wip
* python: moved powerlist to Ctb
* fixed tests to work for powelist in Ctb
* moved signallist, adclist, slowadc, slowadclist to Ctb
* throw approperiate error when no modules added for powers
* added dac test
* fix dac default names and test for dacs
* ctb dacs, yet to do othe rdacs
* dacs should work now even in tests
* run all tests
* DetectorPowers->NamedPowers in ctb
* comments
* removed unnecessary test code
* removed hard coded dac names in python NamedDacs and NamedPowers
* minor
* minor
* fixed error messages
* changed power to be able to set DAC directly, using enable and disable methods with enabled to get
* wip
* wip
* wip. xilinx left
* wip. xilinx
* wip
* wip. compiles
* fixed eiger test
* more fixes
* fixed virtual m3
* fix typos and bugs
* setting power to 0
* set power fixed
* updated server binaries
* minor
* refactoring
* get vchip refactoring
* eiger: unnecessary check for setsettings undefined
* retval pointer for printout
* eiger.wip, mV in boolean
* wip. gotthard2 and m3
* wip. jungfrau
* moench.wip
* compiles.wip
* fix eiger
* m3 fix vthresh
* fix ctband xilinx
* default pwr index = pwr_io
* minor:fn name and highvoltage to local var
* refactor funcs
* minor
* minor
* check dac voltage only for normal dacs and not for power dacs as the dac voltage range is different for ctb and xilinx ctb, also throw for -1 in set for set_dac in client itself. in the server its not clear if its set or get with a -1
* minor
* updated versioning
* review changes: removing validateDACValue and other minor stuff
* binaries in
* wip
* refactored m3 vth
* minor review
* minor review
* m3 serverdac index fix
* minor
* add patternstart command for CTB, block end of execution udp packets if pattern was started by patternstart command
* update docs
* Dhanya's comments
* more Dhanya comments
* refactored
* fixed tests for startpatttern, also clkfrequency not properly used in server
* xilinx: fixed setfrequency, tick clock (with sync clock), clkfrequency set from getfrequency to get the exact value
* xilinx freq in kHz, updated default values and prints
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* update ctb regDefs, included fill level of adc, transceiver and DBit fifos, added enable registers for cont. readout
* fix fifo fill level range bug
* updated ctb RegDefs, increased size of fifo fill level register
* added register to read the firmware git hash
* ctb: added altchip_id read register
* start with unification of pattern machinery for xctb, ctb, mythen
* udate addrs for d-server internal matterhorn startup
* update xctb reg defs
* move pattern loopdef start
* added zero trimbits to matterhorn config
* Revert "added zero trimbits to matterhorn config"
This reverts commit 7c347badd5.
* added adjustable clocks on Xilinx-CTB
* added support for fractional dividers of runclk
* XCTB: make frequencies adjustable from python gui
* update docs
* added support for patternstart command to XCTB
* XCTB: map pattern_ram directly into memory, removed rw strobe
* refactor Mythen pattern control addresses
* test altera ctb with common addresses, removed ifdefs
* change ordering of regdefs
* updated python help for dbitclk, adcclk and runclk (khz)
* xilinx: moved the wait for firmware to measure the actual frequency to the server side and removed it in the pyctbgui side
* will not be anymore in developer branch
* make format (exception RegisterDefs.h), rewrite XILINX PLL to have less consstants in the code
* bug: mixing && for &
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
- fix acquire fail in tests (adcreg test)
- roi tests fail after overlapping invalid test and acquire after
- print udp dest mac in server properly
- fixed udp dst list get (server was not sending entry proper size to match proper struct size in client)
- updated server binaries and updated hard links in serverBin
- added documentation regarding gui: zmqport and zmqip in terms of gui, rx_zmqstream
- removed print - probably ended there for debuggung
---------
Co-authored-by: Alice <alice.mazzoleni@psi.ch>
readout speed added to json and h5 master files.
Also fixed master file inconsistencies
Sserver binaries
- update server binaries because readoutspeed needs to be sent to receiver with rx_hostname command
API
- added const to Detector class set/getburstmode
Python
- updated python bindings (burstmode const and roi arguments)
Cmd generation
- added pragma once in Caller.in.h as Caller is included in test files
m3: num channels due to #counters < 3
* workaround for m3 for messed up num channels (client always assumes all counters enabled and adds them to num channels), fix for hdf5
g2: exptime master file inconsistency
- exptime didnt match because of round of when setting burst mode (sets to a different clk divider)
- so updating actual time for all timers (exptime, period, subexptime etc, ) in Module class, get timer values from detector when setting it and then send to receiver to write in master file
ctb image size incorrect:
- write actual size into master file and not the reserved size (digital reduces depending on dbit list and dbit offset)
- added a calculate ctb image size free function in generalData.h that is used there as well as for the tests.
master file inconsistencies
- refactored master attributes writing using templates
- names changed to keep it consistent between json and hdf5 master file (Version, Pixels, Exposure Times, GateDelays, Acquisition Period, etc.)
- datatypes changed to keep it simple where possible: imageSize, dynamicRange, tengiga, quad, readnrows, analog, analogsamples, digital, digitalsamples, dbitreorder, dbitoffset, transceivermask, transeiver, transceiversamples, countermask, gates =>int
- replacing "toString" with arrays, objects etc for eg for scan, rois, etc.
- json header always written (empty dataset or empty brackets)
- hdf5 needs const char* so have to convert strings to it, but taking care that strings exist prior to push_back
- master attributes (redundant string literals->error prone
tests for master file
- suppressed deprecated functions in rapidjson warnings just for the tests
- added slsREceiverSoftware/src to allow access to receiver_defs.h to test binary/hdf5 version
- refactored acquire tests by moving all the acquire tests from individual detector type files to a single one=test-Caller-acquire.cpp
- set some default settings (loadBasicSettings) for a basic acquire at load config part for the test_simulator python scripts. so minimum number of settings for detector to be set for any acquire tests.
- added tests to test master files for json and hdf5= test-Caller-master-attributes.cpp
- added option to add '-m' markers for tests using test_simulator python script
* slsSupportLib done, at receiver rooting out in implementation
* removed from receiver and client
* removed everywhere except gui, python and client(commands.yaml and Detector.h)
* updated python
* fixed autocomplete to print what the issue is if there is one with ToString when running the autocomplete script to generate fixed.json. updated readme.md in generator folder
* formatting
* removed enums for dacs
* udpating autocomplete and generating commands
* removed gotthard from docs and release notes
* removed dac test
* bug from removing g1
* fixed virtual test for xilinx, was minor. so in this PR
* gui done
* binary in merge fix
* formatting and removing enums
* updated fixed and dump.json
* bash autocomplete
* updated doc on command line generation
* removing increments in dac enums for backward compatibility. Not required
* removed ROI from rxParameters (only in g1), not needed to be backward compatible
* removed the phase shift option from det server staruip
* cli: patwaittime also takes time argument, api: patwaitclocks and patwaitinterval, tcp: patwaitinterval is 2 functions for set and get, patwaitclocks remains a single for backward compatibility with -1 for get, server (loadpattern): clks using member names (needs to be refactored). needs tobe discussed what to do with pattern files.
* all tests passed
* fixed test
* exptime deprecated for ctb and xilinx
* pyctbgui..not there yet
* fixed in pyctbgui
* removed redundant warning for ctb and xilinx exptime in Detector class (already in module class handling all exptime signatures), patwait, patloop and patnloop have to be non inferrable commands because of support for old commands (level as suffix)
* fix formatting error from command line parsing
* fix tests for patwaittime
* usleep in communication to actually relay the err message of memory allocation to the client (weird but test for now), function in server to handle memory allcoation issues (updates mess, ret and sendsit to the client and returns prior from function implementatin, setting fnum in client for the speicific functions that send to detector each argument separtely, they need to remember the fnum else they throw with the incorrect fnum
* server: every malloc must check if it succeeded, rearranging so that the free is clear as well (only in funcs so far)
* fixed malloc checks in other places other than funcs.c
- do not validate write reg, setbit and clearbit by default anymore
- --validate will force validation on the bitmask or entire reg
- remove return value for write reg (across server to client, but thankfully not in the Detector class)
- extend validation into writereg, setbit and clearbit for Eiger (always special)
- need to check python (TODO)
- missed the rx_zmqip implementations in detector.h and python bindings
* put back code to obtain adc and dac device indexafter loading device tree and then create folder iio_device_links and create symbolic links there according to device indices found. ln -sf operation not permitted, so folder has to be deleted and created everytime. Also refactored definitions to have all the xilinx name or detector specific stuff out of programbyArm.c
* uncommented waittransceiverreset at startup (should work now) and return of powering off chip at startup (error for transceiver alignment reset)
* updated registerdefs from firmware
* minor prints and updating names from registerdefs
* waittransceiverreset has been fixed in firmware and removing warnign for that, transceiver alignment check for powering off chip is not done in fw (giving a warning and returning ok for now)
* fixing ipchecksum (not done), removed startperiphery, allowing readout command to be allowed for xilinx when acquiring
* m3: fixed stop server not starting up with setup variables
* all servers except eiger fixed for virtual stop server to start up with setupDetector function called
* virtual tests work
* eiger: versions print neednt be in stop server
* jungfrau: stop server (not virtual) also needs to read config file
* ensuring master is setup for virtual and real servers
maliakal_d
Martin Mueller
muelle_m1
mazzol_a