the capture command in that it not put resluts into the Tcl interpreter.
This broke scriptcontext scripts in complicated situations.
- Resolved some issues with the TAS calculation and negative scattering sense.
- Fixed a bug which did not reset the state to idle after checking
reachability in confvirtualmot.c
SKIPPED:
psi/autowin.c
psi/eigera2.c
psi/jvlprot.c
psi/makefile_linux
psi/sinqhttpopt.c
psi/tasscan.c
- Added a staticoffset to motorsec.c in order to allow the use of softzero
for physics purposes.
- When a triple axis motor fails to start, the whole shit needs to be stopped.
This has now been implemented into tasdrive.c
- There were crashes in adding NB reflections to a reflection list. This has
been fixed.
- Removed generation of incommenurate reflections for 0,0,0 in fourmess.c
- Implemented a Poch command for heartbeats
- Fixed 64 bit dimension issues in nxdict
- Fixed different calling conventions for NXReportError deep stack in nxdict
- Stopped ei motor driving when not necessary
- Added yet another monitor for POLDI
- Added a protocoll driver for the JVL motor RS-485 binary protocoll
- Fixed some reporting issues
SKIPPED:
psi/jvlprot.c
psi/make_gen
psi/polterwrite.c
psi/psi.c
psi/spss7.c
- Extended confvirtmot to have a checkscript
- Made sure that targets get updated when calling tasdrive
- Fixed some output codes in tasdrive.c
- Made tdchm invoke counters event message for Melone
- Fixed the ConID inefficiency by caching the host name in asynnet.c
- Added a traceActive function to trace
SKIPPED:
psi/tdchm.c
- New NeXus libraries
- Added new raw binary transfer mode for mass data
- Added a check script option to configurable virtual motor
SKIPPED:
psi/dumprot.c
psi/make_gen
psi/psi.c
psi/rebin.c
psi/sanslirebin.c
- Fixed ei interrupt bug in tasdrive.c
- Made eiger A2 driving work
- Added force start facility to devexec for POLDI HV
SKIPPED:
psi/eigera2.c
psi/polterwrite.c
did not have enough counts
- Reduced polling frequency in emon
- Fixed a scriptcontext bug which would cause it to dump core in SctTransact
on interrupts
- Fixed an issue with missing <nl> at the end of batch files
- Added a feature which does not call halt when counting stops in hmcontrol.c
This is necessary for the BOA CCD
- Initalized doNotFree properly in hipadaba.c
- Added the travelling salesman reflection measurement algorithm
- Added another component to amorset
- Removed old SicsWait from nserver.c
- Added a means to nxscript to write 16 bit data for BOA
- Modified tasub to accept a drivabel as a motor and not only a motor.
This became necessary to make EIGER work as A2 on EIGER is a virtual
motor
SKIPPED:
psi/amorcomp.h
psi/amordrive.h
psi/amorset.c
psi/amorset.h
psi/amorset.tex
psi/amorset.w
psi/el734hp.c
psi/el737hpdriv.c
psi/make_gen
psi/pardef.c
psi/polterwrite.c
psi/psi.c
psi/sinqhttpopt.c
- Added a warning for excessive data rates on monitors
- Added statistics to devser and thus to scriptcontext
- Added byte concatenation to dynstring
- Added aborting for reflection generation to fourmess.c
- Added data checksum testing to hipadaba, use for update tests
- Fixed interrupt discovery in network.c, caused invalid interrupt
codes which in turn confused sicscron which had to be fixed too.
- Renamed ubcalc into ubcalcint in order to reclaim the ubcalc for Jurg
- Added an a3offset to tasub in order to fix what I perceive an IS problem
- Added support for the newer version of the Siemens SPS, the S7
- Added a not yet fully working sinqhttpopt driver which talks to
http HM without libghttp
SKIPPED:
psi/delcam.c
psi/make_gen
psi/psi.c
psi/sinq.c
psi/sinq.h
psi/sinqhttpopt.c
psi/slsvme.c
psi/spss7.c
- Fixes to make RITA work
- tasub extended to calculate UB from cell alone, support for elastic mode
- New MultiCounter as abstraction for counting on HM's
- regression test driver for counters
- Fixed new AMOR settings module
- Initial implementation of the new SICS hierarchical parameter database
SKIPPED:
psi/amorset.c
psi/libpsi.a
psi/sps.c
- Mended tasdrive to drive energy even if Q is askew
- Fixed QM values
- Fixed problems in mesure: om2th, wrong theta selection
- Fixed core dump when driving h,kl, failed
- Fixed exeman to write files by default into the first directory in batchpath
- Fixed a bug in nxdict which prevented it from handling attributes
containing :/ properly
- Removed junk files
- Fixed a bug in hklscan.c which made it dump core
- Added XML support to nxscript.c
- Added support for writing NeXus-XML data files to tasub
- Made AMOR write HDF-5 data in chunks
- Added driver for a PSI-DSP magnet controller as used at SLS
- Added code for directly accessing RS232 controllers connected to a
terminal server, thereby bypassing the SerPortServer
- A rounding problem in the PSD histogram memory was resolved.
TAS code.
- Fixed communication problems in SerPortServer, mainly with terminator
detection.
- Added SPS switched motors for TOPSI
- Debugged Power-PC histogram memory software for TRICS
- Introduced simulation mode to simdriv and simcter, i.e they never fail and
finish at once.
- Started defining MAD compatibility commands in Tcl
- Fixed a bug in FOCUS_src which caused it to leak sockets.
- Introduced setsockopt SO_REUSEADDR to all new sockets in sinqhm in order
to loose the next sinqhm error.
- Added transfer of zipped data to conman.c, histogram memory software
in order to support the TRICS status display.
- Upgraded TRICS data file writing.
- First installment of triple axis spectrometer support: initialization of
data structures and an implementation of the MAD dr(ive) command.
