1122 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
leonarski_fandClaude Opus 4.8	b65691f312	Add fused GPU adaptive spot finder (azint + spot finding in one pass) ... AdaptiveSpotFinderGPU does the per-resolution-ring reduction once on the GPU and drives both products from it: the azimuthal-integration profile (corrected space) and the self-calibrating adaptive spot-detection threshold (raw counts). This replaces the separate GPU azint pass and the host-side adaptive spot finder that runs on the GPU path today. On a ~4.5 MP detector it does both jobs in ~1 ms/frame versus ~40 ms for the CPU adaptive finder (~42x), with an identical spot list and azimuthal profile. The per-ring threshold math (Poisson tail + read-floored Gaussian, operating point from the false-pixels-per-frame knob) is factored into AdaptiveThreshold.h so the CPU and GPU finders share one source of truth and cannot drift. Wired opt-in via a MXAnalysisWithoutFPGA constructor flag, default on for the rugnux offline path and the interactive viewer, off for the online receiver (so the broker path is unchanged). When on, Analyze() skips the separate azint pass and lifts the profile from the fused engine. The viewer gains an "Adaptive threshold" checkbox that greys out the signal/noise and photon-count sliders (the adaptive finder uses neither). Dedicated tests exercise both products (spot-finding parity vs the CPU finder, azimuthal profile vs a standalone GPU azint) plus a speed benchmark. Validated end-to-end on lysozyme serial stills: fused == CPU-adaptive index rate and merge stats. Docs: new section 3.2 in docs/CPU_DATA_ANALYSIS.md. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 20:10:45 +02:00
leonarski_fandClaude Opus 4.8	a43f9bda13	Remove non-helping stills merge/scaling knobs ... Trims three opt-in stills parameters that did not improve data quality on the external-reference (PDB R-free) battery and only added code: - --partiality-uncertainty: the (1-p)/p merge-sigma term was null on KR2/OCP/ NmHR/CTX vs their reference structures (and neutral-to-harmful at higher coefficients); removed the flag, setting and CorrectedSigma term. - --stills-modulation: the detector-plane flat-field surface was net-negative on flooded data; removed the flag, setting and MergeOnTheFly::RefineModulation (the rotation modulation in RotationScaleMerge is unaffected). - --min-indexed-fraction: every value other than the 0.20 default collapsed CC1/2; removed the override flag/setter, keeping the fixed 0.20 acceptance floor. Default behaviour is unchanged (all three were off / at their default). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 17:40:48 +02:00
leonarski_fandClaude Opus 4.8	86f71ed95d	Remove --soft-weight and --local-snr spot-finder options ... Both were opt-in adaptive-spot refinements that did not help. Soft per-spot weighting was index-rate neutral across the battery (re-ranking only bites when spots exceed the max-spot cap, which weak serial data does not reach). The local-SNR gate was neutral on index rate and degraded merged CC1/2 on flooded XFEL data. Drops the flags, ApplyWeights/FilterByLocalSNR, the per-spot weight field, and the by-weight FilterSpotsByCount branch (now strongest-first only). --adaptive-spots itself is unchanged. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 17:31:35 +02:00
leonarski_fandClaude Opus 4.8	238d0e11fe	Remove dead per-crystal deltaCChalf rejection ... Drops the --reject-delta-cchalf flag and MergeOnTheFly::DeltaCChalfReject. The CLI value was parsed but never consumed (the method had no call site), so the flag was already a no-op. Wiring it up and testing against an external reference (7O8F) showed it is confirmation bias: on a spurious-crystal flood it raised internal CC1/2 while CCref (correlation to the true structure) fell, and it never improved R_meas. The merge weights are already correct; per-crystal merge-side rejection has no genuine lever here. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 15:05:06 +02:00
leonarski_fandClaude Opus 4.8	00240a44c0	Remove threshold-free persistence spot-detection variant ... Drops --persistence-spots and AdaptiveSpotFinderCPU::RunPersistence (the 0-D topological-persistence detector added in 5a33b0743). It was a research variant that never beat the hard-threshold adaptive detector on a CC1/2 basis and is a GPU dead-end (global candidate sort + union-find), so it is not a production path. The hard-threshold --adaptive-spots detector is unaffected. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 12:41:44 +02:00
leonarski_fandClaude Opus 4.8	9415c0483b	Add opt-in local-SNR spot gate and acceptance-fraction knob (serial stills) ... Two opt-in tools for weak serial-stills tuning; both default-off, so the default pipeline is bit-identical (verified: NmHR 7.85% identical to HEAD). --local-snr <sigma> (AdaptiveSpotFinderCPU::FilterByLocalSNR): after the loose per-ring adaptive threshold builds connected-component spots, drop any spot that does not stand this many sigmas above its OWN LOCAL background (robust median/MAD of a square annulus), not just the azimuthal ring mean. On structured-background (XFEL) frames the ring mean underestimates the local diffuse level in some sectors, so the ring threshold floods; a real Bragg peak still stands many local sigmas proud. Validated on XFEL stills to separate real peaks from flood at the pixel level (real median local-SNR ~70 vs flood ~2.6; SNR>=5 keeps ~99.8% of real peaks, ~14% of flood). GPU-portable (a per-spot local reduction). NOTE: on the current battery (NmHR/OCP) it is index-rate/CC1/2 neutral -- the flood that survives as CC clusters overlaps weak-real spots, and only lattice-fit separates those -- but it is the correct tool for genuinely floody data (ice/jet/loosened detector) and the right substrate for the online FPGA path. --min-indexed-fraction <f>: exposes the previously hardcoded 0.20 minimum indexed-spot fraction (AnalyzeIndexing) as a per-run setting. Lowering it admits weaker/sparser crystals; on flooded XFEL data the extra lattices are spurious (pair with --min-image-cc to gate them), on clean synchrotron data there are no marginal frames so it is a no-op -- useful as a gating-experiment primitive. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-24 11:12:22 +02:00
leonarski_fandClaude Opus 4.8	89282b6d82	Apply --min-image-cc merge-consistency filter on the stills merge path ... The per-image CC-to-reference filter (--min-image-cc) was only honoured on the rotation merge; the stills merge added every crystal unconditionally. Extend it to stills so the flag is meaningful there too: on flooded frames that produce many spurious lattices (large-cell serial data), the crystals whose per-image CC to the reference falls below the limit are dropped, keeping only the coherent ones in the merge. Opt-in and default-off (limit 0 -> the loop passes cc_filter=false and the merge is bit-identical to before), so no existing behaviour changes. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-24 08:41:48 +02:00
leonarski_fandClaude Opus 4.8	35070ad115	Seed still indexing with the strongest spots; refine with all ... On flooded or noisy still frames (weakly-diffracting detectors, XFEL background, ice) the full spot list derails the known-cell indexer: its many spurious peaks compete with the true reflections for the search, so genuinely diffracting frames fail to index. Seed the indexer with a few spot-count subsets (30 / 80 / all) and keep the lattice that explains the largest FRACTION of its own seed -- a lean, clean seed that a good lattice indexes almost fully beats a flooded seed it fits only in small part. This auto-selects a lean seed on noisy frames and the full seed where the extra spots are real signal, with no per-dataset setting. Geometry refinement and integration still use the full spot list (the orientation refiner filters spots by lattice match, so the flood is ignored while high-resolution spots are kept), so resolution is preserved. Costs at most ~3 indexer calls per frame, only on frames that do not index on the first, lean seed. Lifts the indexed-crystal yield on mildly-flooded synchrotron serial data with no regression elsewhere. Stills only; the rotation indexing path is unaffected. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-24 00:07:24 +02:00
leonarski_fandClaude Opus 4.8	9b209d335d	Add soft per-spot quality weighting for adaptive spot detection ... Add --soft-weight (implies --adaptive-spots): give every detected spot a continuous quality weight in (0,1] and keep the highest-weight spots rather than the brightest, so a deliberately loose detector self-cleans -- bright ice / salt / jet blobs and single-pixel noise no longer evict faint clean Bragg spots from the max-spots cut. The weight is a product of dimensionless gates (AdaptiveSpotFinderCPU::ApplyWeights, computed against the per-ring background the adaptive finder already builds): a logistic ramp in the spot's SNR and a soft size band (rises from one pixel, plateaus, falls for oversized ice/salt/streak blobs). It carries on DiffractionSpot -> SpotToSave and is consumed by FilterSpotsByCount, which ranks by {non-ice, weight, intensity} when requested and by intensity otherwise, so the classic and FPGA paths are unchanged. Honest result: on the serial-stills battery this is index-rate-NEUTRAL. The weighted ranking only changes the outcome when the spot count exceeds the max-spots cap and the weight disagrees with intensity in a way that affects indexing; the adaptive detectors already produce clean spot lists and the weak sets sit under the cap, so re-ranking is a wash there (and a wash, not a regression, on the one set that floods). Its intended benefit -- robustness to ice/jet-contaminated frames and to a loosened detector -- is not exercised by this battery; kept opt-in as the substrate for that. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-23 19:53:55 +02:00
leonarski_fandClaude Opus 4.8	5a33b07435	Add threshold-free persistence variant of adaptive spot detection ... Add --persistence-spots, a second parameter-free detector alongside --adaptive-spots. Instead of a hard per-ring threshold it builds the noise-normalised image z = (I - ring_mean) / sqrt(ring_sigma^2 + read^2) (same per-ring background as the hard variant) and scores every intensity maximum by its 0-D topological persistence: sweeping the height from high to low, each maximum is born and, when its basin meets a taller one at a saddle, dies with persistence = birth - saddle, in sigma. A lone noise spike merges into the background almost immediately (persistence ~1 sigma); a real peak stands many sigma proud. Emitting maxima whose persistence clears the same z(E) significance bar needs no photon threshold and no min-pix, and it deblends touching peaks (each keeps its own maximum). Implemented with the same union-find idiom as the connected-component labeller. On serial stills this auto-adapts with no per-dataset tuning like --adaptive-spots, finding fewer but cleaner (deblended) spots; the hard-threshold variant remains more sensitive on the very weakest data. Both share the per-ring background and read-noise floor. comp_of is allocated lazily so the default and hard-adaptive paths pay nothing. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-23 17:38:18 +02:00
leonarski_fandClaude Opus 4.8	0ed50d91c9	Add self-calibrating adaptive spot detection for offline stills ... The offline CPU spot finder marks a pixel strong when it clears a fixed photon count AND a local-window SNR. The fixed photon floor forces per-dataset tuning: its sweet spot tracks the background level (weak sets want a low threshold, strong or high-background sets a high one) and the usable window is narrow, so users hand-tune --spot-threshold/--spot-sigma per dataset. Add an opt-in --adaptive-spots mode (AdaptiveSpotFinderCPU) that replaces the fixed floor with a per-resolution-ring threshold derived from each image's own noise. Per ring it computes a peak-excluded background mean and sigma (one plain pass + two sigma-clip passes over the assembled photon image, binned by the azimuthal-integration ring index) and sets thr = max( PoissonTail(mean, p), mean + z * sqrt(sigma^2 + read^2) ) with p = false_pixels_per_frame / n_pixels the single portable knob (default 100) and z = Phi^-1(1 - p). The Poisson arm is the correct significance where the background is countable (it carries the sqrt(mean) shot noise, so a bright low-resolution ring gets a high threshold); the read-noise-floored Gaussian arm keeps the threshold physical where the background vanishes (empty high-resolution rings), without which those rings flood. read is a detector-level constant, not a per-dataset knob. Both arms are needed: Poisson alone floods near-zero background, Gaussian alone drops the shot-noise term and under-thresholds bright rings. One --adaptive-spots setting then adapts across a wide range of serial datasets with no per-dataset threshold, matching or beating hand-tuned thresholds and the peakfinder8/xgandalf reference on both weak large-cell and strong serial data, with equal merged R-free. The finder runs on the CPU (offline/viewer path) and reads the host image, which the GPU pipeline already keeps in sync, so it works in either build. The default (non-adaptive) path and the online/FPGA path are unchanged. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-23 17:23:19 +02:00
leonarski_fandClaude Opus 4.8	efe96fe2ae	Add physical partiality post-refinement for stills (default on) ... Replace the frozen scalar-sigma stills partiality with a physical, refined model. Per crystal, refine an orientation tilt (dpsi_x, dpsi_y) against the running merge and recompute each reflection's partiality analytically from the refined geometry (angular Ewald-proximity model, sigma(d*) = gamma_e*d*), with the per-crystal scale G profiled out by the existing robust IRLS - no re-integration. A soft Gaussian prior on dpsi tames weak-data overfit while staying inert on strong data. The merge <-> refine loop iterates a few times. This is now the stills default via ScalingSettings::stills_partiality_refine (on). A single opt-out flag `--simple-stills` reverts to treating every reflection as a full (p=1, single pass). Retires the experimental `--still-partiality` flag. The viewer gains a "Partiality post-refinement (stills)" checkbox in Scaling settings. Validated (integrate-once / --scale): CC1/2 and R_meas both improve on lyso8 (+2.8 / -10), KR2 (+5.6 / -3.4) and LOV (+2.1 / -4); neutral on a pink-beam DMM set (already-full reflections); R-free/R-work down vs a fixed model; competitive with CrystFEL partialator on matched frames. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-23 14:45:43 +02:00
leonarski_fandClaude Opus 4.8	cbc6a85157	Debias stills merge with expected-variance weighting ... The serial-stills merge (MergeOnTheFly::CorrectedSigma) weighted each observation by 1/sigma^2 using the observation's OWN sigma. Below ~1 photon the Poisson signal part of that sigma correlates with the observation's up/down fluctuation, so the inverse-variance mean is biased low: an up-fluctuated observation acquires a larger sigma and is over-downweighted. The rotation combine (RotationScaleMerge:: process_rawrun) already avoids this by rebuilding the signal variance at the pooled estimate; the stills path did not. Decompose each observation's variance into a background/read part (kept per-observation) and a Poisson signal part, and rebuild the signal part at the reflection's expected <I>. Bit-identical when an observation sits at its reflection mean; only weak-shell weights move. Now default on, so the stills path matches the rotation path; --no-expected-variance-merge restores the old observed-sigma weighting. Validated by paired refinement (phenix, 5 free-set seeds, byte-identical free flags across arms): R-free-neutral on strong lysozyme and lower R-free on weak serial-stills data checked against an independent deposited model (6/6 seeds). The CC1/2 dip on strong data reflects precision, not accuracy. Applies to both offline rugnux and the online broker stills merge. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-22 22:50:25 +02:00
leonarski_fandClaude Opus 4.8	c52886c8ff	Guard degenerate asymptotic-ISa fit on low-multiplicity data ... On very-low-multiplicity data (e.g. EP_cs_01-24, mult ~1.4) the merge has too few symmetry equivalents to measure the asymptotic I/sigma: both the (a, b) error-model fit and the per-group strong-reflection scatter collapse toward zero, so 1/error_model_b_asymptotic either explodes to an impossibly high ISa (tiny positive b) or is left as 0. Real macromolecular data does not exceed ISa ~50, so clamp the reported asymptote at a generous cap (ISa 100) and treat anything past it as unmeasured (result.isa undetermined) rather than emitting a spurious extreme. No-op for all well-measured data (b_asy well above the cap). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-21 23:02:40 +02:00
leonarski_fandClaude Opus 4.8	81dbf9a385	Fix empty spot-plot and resolution percentile in SpotAnalyze ... GenerateSpotPlot iterated msg.spots, but SpotAnalyze called it before assigning output.spots. In the online path the DataMessage is fresh per frame, so the plot was built from an empty list and spot_plot_intensity / spot_plot_count came out all zeros. Pass the finished spots vector explicitly instead of relying on the field being set: the live path passes the full pre-truncation list, the HDF5 read-back path passes message.spots. GetResolution scaled the 5th-percentile index by spots.size() (which includes ice-ring spots) while indexing the ice-filtered resolutions vector, biasing the estimate and reading out of bounds on ice-heavy frames. Index by resolutions.size() instead. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-07-21 09:53:33 +02:00
leonarski_f	67dca388bd	v1.0.0-rc.160 (#70) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Add `--model model.pdb` - score the merged data against an atomic model and compute initial maps. It reports R-work/R-free (scaling the model to the observed amplitudes with an overall scale, an anisotropic B and a flat bulk solvent - the standard few-parameter model, so a batch of maps stays directly comparable) and writes 2Fo-Fc / Fo-Fc electron-density maps (CCP4) plus a map-coefficient MTZ. The structure itself is not refined; the model is only re-fractionalised into the data cell. * rugnux: The merged reflection output now carries French-Wilson amplitudes (|F| and its sigma) next to the intensities - MTZ `F`/`SIGF`, mmCIF `_refln.F_meas_au`, and the text HKL - computed with the correct centric/acentric Wilson prior and epsilon multiplicity, so a downstream program (e.g. phenix.refine) can refine against amplitudes. The intensity columns are unchanged. * rugnux: R-free test-set flags are now assigned deterministically and consistently across symmetry - a Bijvoet pair I(+)/I(-) is never split between the work and free sets, and the assignment is a reproducible per-hkl hash that depends only on the reflection index, so every dataset of one crystal form gets the same ~5% free set (what a multi-dataset campaign such as PanDDA needs). On small data the fraction is floored so the test set stays large enough for a stable R-free (~500 reflections, capped at 10%); it stays flat at 5% on ordinary data. When a reference MTZ carries a `FreeR_flag` column its test set is imported instead, letting a whole campaign inherit one shared free set. * rugnux: A reference MTZ (`--reference-mtz`) can now fix the space group and cell for rotation data too (previously rejected), without being used to scale - the rotation merge stays self-consistent. When the crystal has an indexing (merohedral) ambiguity - a lattice symmetry higher than its Laue symmetry, e.g. P3/P4/P6/C2 - the reference also resolves it: each candidate reindexing (identity plus the twin-law cosets of the metric symmetry) is scored by its intensity correlation against the reference and the data are re-merged in the best-correlating one. This is a metric-preserving relabelling of hkl (the cell is unchanged) and a no-op for a holohedral crystal such as lysozyme. * rugnux: `--model` validation now aligns the data to the model before scoring - the observed reflections are reindexed into the model's enantiomorph when the two differ only by hand (indistinguishable from merged intensities). A merohedral indexing ambiguity is resolved against the reference MTZ when one is given (so a whole campaign shares one indexing convention); only with a model and no reference does validation fall back to fitting each candidate reindexing and keeping the lowest R-free. * rugnux: De-novo symmetry - recover a genuine high-symmetry group whose data are imperfectly scaled. Such a merge's within-orbit chi² lands just past the self-consistency bound (each real symmetry step adds a little systematic scatter), right where a merohedral twin also lands, so the chi² ratio alone cannot separate them. The candidate is now rescued when the extra intensity-proportional systematic error it invokes stays small relative to the confirmed subgroup - a genuine symmetry step gains multiplicity without inflating the merge error model's b, whereas a twin forces non-equivalent reflections together and b balloons. Fixes cubic insulin (I23 instead of I222) with no change to any other crystal in the test battery, including the twins that must stay in their lower symmetry. * Docs: Document the French-Wilson amplitude estimation, R-free flagging, reference-based space-group/ambiguity resolution, and model-based validation/maps in CPU_DATA_ANALYSIS.md. * Frontend: The status-bar pill now shows a progress bar during detector calibration (previously only during measurement), and the calibration state and its button are labelled "Calibration"/"CALIBRATE" (the internal `Pedestal` state name is unchanged for back-compatibility).Reviewed-on: #70 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.160	2026-07-19 09:39:28 +02:00
leonarski_f	dd0bffb283	v1.0.0-rc.159 (#69) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Add `--model model.pdb` - score the merged data against an atomic model and compute initial maps. It reports R-work/R-free (scaling the model to the observed amplitudes with an overall scale, an anisotropic B and a flat bulk solvent - the standard few-parameter model, so a batch of maps stays directly comparable) and writes 2Fo-Fc / Fo-Fc electron-density maps (CCP4) plus a map-coefficient MTZ. The structure itself is not refined; the model is only re-fractionalised into the data cell. * rugnux: The merged reflection output now carries French-Wilson amplitudes (|F| and its sigma) next to the intensities - MTZ `F`/`SIGF`, mmCIF `_refln.F_meas_au`, and the text HKL - computed with the correct centric/acentric Wilson prior and epsilon multiplicity, so a downstream program (e.g. phenix.refine) can refine against amplitudes. The intensity columns are unchanged. * rugnux: R-free test-set flags are now assigned deterministically and consistently across symmetry - a Bijvoet pair I(+)/I(-) is never split between the work and free sets, and the assignment is a reproducible per-hkl hash that depends only on the reflection index, so every dataset of one crystal form gets the same ~5% free set (what a multi-dataset campaign such as PanDDA needs). On small data the fraction is floored so the test set stays large enough for a stable R-free (~500 reflections, capped at 10%); it stays flat at 5% on ordinary data. When a reference MTZ carries a `FreeR_flag` column its test set is imported instead, letting a whole campaign inherit one shared free set. * rugnux: A reference MTZ (`--reference-mtz`) can now fix the space group and cell for rotation data too (previously rejected), without being used to scale - the rotation merge stays self-consistent. When the crystal has an indexing (merohedral) ambiguity - a lattice symmetry higher than its Laue symmetry, e.g. P3/P4/P6/C2 - the reference also resolves it: each candidate reindexing (identity plus the twin-law cosets of the metric symmetry) is scored by its intensity correlation against the reference and the data are re-merged in the best-correlating one. This is a metric-preserving relabelling of hkl (the cell is unchanged) and a no-op for a holohedral crystal such as lysozyme. * rugnux: `--model` validation now aligns the data to the model before scoring - the observed reflections are reindexed into the model's enantiomorph when the two differ only by hand (indistinguishable from merged intensities). A merohedral indexing ambiguity is resolved against the reference MTZ when one is given (so a whole campaign shares one indexing convention); only with a model and no reference does validation fall back to fitting each candidate reindexing and keeping the lowest R-free. * rugnux: De-novo symmetry - recover a genuine high-symmetry group whose data are imperfectly scaled. Such a merge's within-orbit chi² lands just past the self-consistency bound (each real symmetry step adds a little systematic scatter), right where a merohedral twin also lands, so the chi² ratio alone cannot separate them. The candidate is now rescued when the extra intensity-proportional systematic error it invokes stays small relative to the confirmed subgroup - a genuine symmetry step gains multiplicity without inflating the merge error model's b, whereas a twin forces non-equivalent reflections together and b balloons. Fixes cubic insulin (I23 instead of I222) with no change to any other crystal in the test battery, including the twins that must stay in their lower symmetry. * Docs: Document the French-Wilson amplitude estimation, R-free flagging, reference-based space-group/ambiguity resolution, and model-based validation/maps in CPU_DATA_ANALYSIS.md. * Frontend: The status-bar pill now shows a progress bar during detector calibration (previously only during measurement), and the calibration state and its button are labelled "Calibration"/"CALIBRATE" (the internal `Pedestal` state name is unchanged for back-compatibility).Reviewed-on: #69 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.159	2026-07-13 13:54:03 +02:00
leonarski_f	451310f43d	v1.0.0-rc.158 (#68) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * Analysis: The azimuthal-integration solid-angle correction now follows the incidence angle to the detector normal (`cos^3` of that angle) instead of `cos^3(2*theta)`, so it is correct for a tilted detector and matches PyFAI `solidAngleArray` and MAX IV azint (unchanged for an untilted detector). Crystal geometry refinement (`XtalOptimizer`) no longer silently ignores an imported PONI `rot3` (rotation about the beam): it is applied as a fixed rotation in the residual so refinement stays consistent with the rest of the pipeline. Polarization and azimuthal binning already honoured `rot3` through the full PONI rotation. * jfjoch_viewer: Open datasets on the WSL2/UNC filesystem (paths starting `\\`); write processing outputs next to the input file, with a Browse button and independent `_process.h5` / merged `.mtz`/`.cif` toggles; and show the determined space group in the merge-statistics window. * rugnux: Accept an absolute `-o` output prefix in offline processing. * Packaging: The self-contained Linux viewer `.tgz` now bundles cuFFT, so it runs without a system CUDA toolkit (`.deb`/`.rpm` are unchanged, distro-managed). * Docs: Bring the analysis references up to date with the code. `docs/CPU_DATA_ANALYSIS.md` now reflects the unified profile-fit Bragg integration engine, multi-lattice indexing, azimuthal phi binning, the radial parallax/bandwidth profile with sub-pixel centring, the rot3d capture-fraction handling and the automatic CC1/2 resolution cutoff, and drops the descriptions of features that were never implemented (French-Wilson amplitudes, the still excitation-error partiality model); `docs/RUGNUX.md` documents the new `--resolution-cutoff`/`--resolution-cc-target`/`--resolution-shells`, `--min-captured-fraction`, `--mosaicity`, `--reference-column`, the azimuthal correction toggles and the geometry-override options, and corrects the `-N` default. The outdated in-source design notes (ICE_RING_DETECTION, BRAGG_INTEGRATION_ENGINE, NEXTGEN_INTEGRATOR) are removed.Reviewed-on: #68 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.158	2026-07-12 19:42:29 +02:00
leonarski_f	54c0100e8e	v1.0.0-rc.157 (#67) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Rebrand the offline data-processing subsystem as `rugnux` and consolidate all offline analysis into the single `rugnux` binary - `jfjoch_process` is now `rugnux`, the former `jfjoch_azint` is now `rugnux --azint-only`, and `jfjoch_scale` is now `rugnux --scale` (see the new docs/NAMING.md and docs/RUGNUX.md). Scaling and merging are on by default for rotation and stills (`--no-merge` disables them), replacing the previous opt-in `-M, --scale-merge`. * rugnux: CLI fixes - default `-N` to all hardware threads, parse numeric option arguments strictly (reject non-numeric or trailing input instead of silently yielding 0), require `--wavelength > 0`, and correct the reproduced command line and `--scale` reference-cell handling. * rugnux: De-novo space-group improvements - recover genuine high symmetry and centred Bravais lattices from intensities, add an automatic CC1/2 high-resolution cutoff, and report L-test twinning statistics. * rugnux: Index weakly-diffracting low-resolution rotation data that previously failed (e.g. F-cubic crystals that diffract only to ~4 A on a detector reaching ~1.5 A). The per-frame indexing gate now measures the indexed fraction only within the resolution range the lattice actually diffracts to, so the many sub-diffraction ice/noise spots no longer make the fraction floor unreachable; the two-pass first pass tries several image-sampling schemes (spread across the whole rotation vs a consecutive wedge whose native stride keeps a reflection's rocking curve continuous, letting the FFT resolve a long axis) and keeps the one that indexes the most frames; and the de-novo space-group search no longer discards all reflections (and crashes) when every resolution shell falls below <I/sigma> = 1. * rugnux: Lower the low-resolution R-meas for strongly-diffracting rotation data - drop edge-of-sweep truncated fulls whose rocking curve was captured below `--min-captured-fraction` (default 0.7 for rotation), and report R-meas only over the observations kept by outlier rejection (matching XDS). The 0.7 default also strips the partiality-extrapolated fulls that dominate the intensity second moment on weakly-diffracting crystals, so the de-novo space-group search is no longer starved by the error-model I/sigma floor and recovers the correct symmetry (e.g. the F-cubic Benas crystals: Benas_3 -> F432, Benas_7 -> P6122, instead of P4/P1); on the reference battery every other crystal keeps its space group. * rugnux: Write the refined geometry (beam, tilt, axis) to _process.h5 and place non-standard mmCIF items under a reserved `jfjoch` prefix. * jfjoch_broker: Ordinary acquisition failures (receiver/writer/analysis problems, missed packets, writer disconnect) now return to the Idle state with an Error-severity message, so a run can be retried without an expensive re-initialisation; only failures that leave the detector in an undefined state (new JFJochCriticalException, e.g. PCIe/FPGA faults) go to the Error state and force re-initialisation. * jfjoch_broker: A synchronous /start now reports its failure to the HTTP caller instead of returning HTTP 200, and an incomplete or truncated dataset (missing packets, writer disconnect) is reported as an error rather than a "reduce frame rate" warning. * jfjoch_broker: Drop uncollected placeholder rows (number = -1) from the scan_result REST endpoint. * jfjoch_broker: Fix the inverted per-image compression ratio reported by the Lite receiver (was compressed/uncompressed instead of uncompressed/compressed). * jfjoch_broker: Bragg integration adds a quantization-noise variance floor with a box-sum fallback, and treats the type-maximum marker as an invalid pixel for unsigned image types. * jfjoch_writer: Detect file-overwrite conflicts at start for back-channel transports, and reset the writer when end-of-collection finalisation fails. * jfjoch_viewer: Preview overlays follow the geometry (resolution/ROI arcs, true beam centre, predictions, coral secondary-lattice spots, legend), add save-as-JPEG, and fix an HTTP live-follow memory leak. * Frontend: Improved aesthetics and usability, and added in-browser pixel-mask and JUNGFRAU-pedestal visualisation. * CI: Name the Windows installer jfjoch-viewer-* instead of jfjoch-*.Reviewed-on: #67 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.157	2026-07-11 07:19:11 +02:00
leonarski_f	d6389e12da	v1.0.0-rc.156 (#66) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Major rotation (rot3d) data processing overhaul - robust profile-fit integration, Cauchy-loss scaling with optional absorption surface, de-novo indexing and space-group/centering determination fixes, and merging statistics + ISa in the mmCIF output. * jfjoch_process: Add EXPERIMENTAL ice-ring detection (--detect-ice-rings) that excludes ice reflections from scaling. * Compression: Add BSHUF_ZSTD_RLE_HUFF, make compression size-aware (drop frames that don't fit rather than aborting), and add the jfjoch_recompress tool. * jfjoch_viewer: Report "Multiple lattices detected" and grey out "Analyze dataset" on a live connection. * jfjoch_broker: Write smargon chi/phi goniometer positions to NXmx; read sensor thickness/material from HDF5 metadata. * CI: Build Windows (CUDA and non-CUDA) installers.Reviewed-on: #66 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.156	2026-07-03 19:18:56 +02:00
leonarski_f	54c667190f	v1.0.0-rc.155 (#65) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Remove pixelrefine option (replaced with ProfileIntegrate2D) * jfjoch_viewer: Some graphical improvements. * jfjoch_viewer: Simplify und unify data analysis settings. * jfjoch_writer: Add TCP keepalive to increase robustness if jfjoch_broker "dies" in the middle of data acquisition. Reviewed-on: #65 1.0.0-rc.155	2026-06-25 22:01:48 +02:00
leonarski_f	6136f858af	v1.0.0-rc.154 (#64) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Fix to TCP file pusher (remove kernel zero copy to improve reliability) Reviewed-on: #64 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.154	2026-06-25 18:12:00 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63 1.0.0-rc.153	2026-06-23 20:29:49 +02:00
leonarski_f	c49bd2ac3b	v1.0.0-rc.152 (#62) ... * jfjoch_broker: Fix bounds for azimuthal integration for Q spacing (allow Q of 1e-5) * jfjoch_viewer: Adjust Q bounds for azimuthal integration * jfjoch_azint: Add tool to do quick azimuthal integration Reviewed-on: #62 1.0.0-rc.152	2026-06-17 20:36:24 +02:00
leonarski_f	ef52dac2ee	v1.0.0-rc.151 (#61) ... * jfjoch_broker: For PSI EIGER detector allow to disable individual half-modules by putting empty hostname Reviewed-on: #61 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.151	2026-06-16 14:13:29 +02:00
leonarski_f	90e804acd7	v1.0.0-rc.150 (#60) ... * jfjoch_broker: When in FPGA workflow (with PSI detectors) azimuthal integration might be forced to CPU - this will require more computational power, but it enables more integration bins and reports standard deviation of each bin. * jfjoch_broker: Raise error if one is in FPGA flow and there are too many azimuthal integration bins. Reviewed-on: #60 1.0.0-rc.150	2026-06-15 20:24:15 +02:00
leonarski_f	ea575f790a	v1.0.0-rc.149 (#59) ... * XDS plugin: Fix HDF5 mutex to run on multiple processors Reviewed-on: #59 1.0.0-rc.149	2026-06-13 21:27:41 +02:00
leonarski_f	cc3eb8352c	v1.0.0-rc.148 (#58) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_broker: Improve azimuthal integration (add <I^2> calculation) * jfjoch_broker: Fixes around indexing, aiming to handle multi-lattice crystals (work in progress, it is not fully integrated) * jfjoch_writer: Save mean(I), stddev(I), and count(I) for each azimuthal bin Reviewed-on: #58 1.0.0-rc.148	2026-06-08 08:30:35 +02:00
leonarski_f	75de40f52b	v1.0.0-rc.147 (#57) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_viewer: Add reciprocal space viewer * jfjoch_process: Two pass algorithm that does spot finding/indexing + integration of full dataset * jfjoch_process: Improve logic for rotation indexer, to make execution more deterministic (still work in progress) Reviewed-on: #57 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-06-02 11:49:24 +02:00
leonarski_f	fc68a9baed	v1.0.0-rc.146 (#56) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. jfjoch_process: Generate a dedicated file (_process.h5), which can be used as a replacement for the _master.h5 file for a reanalyzed dataset. jfjoch_process: Improve the performance of scaling and merging, implement on the fly scaling. jfjoch_writer: All final data analysis results are repopulated in the _master.h5 file. jfjoch_scale: Dedicated tool for rescaling/merging existing data. jfjoch_viewer: Fix bugs where pixel labels where displayed on a wrong pixel. WARNING! Scaling and merging are experimental at the moment, and may not provide reasonable results for the time being. Reviewed-on: #56 1.0.0-rc.146	2026-05-28 18:48:35 +02:00
leonarski_f	75f1c5f954	SHIM library improvements from the HDF Group	2026-05-08 11:39:51 +02:00
leonarski_f	caef26873e	v1.0.0-rc.145 (#55) ... This is an UNSTABLE release. The release has significant modifications for HDF5 writing logic - in case of troubles go back to 1.0.0-rc.144. * **Default HDF5 writing mode is with VDS, not soft-links** - this improves DIALS compatibility and makes format more future-proof, NXmx legacy format might be phased-out in the future. * XDS plugin: Improve performance of VDS reading. * jfjoch_writer: Significant improvement on how file systems I/O are handled through a dedicated pass-through VFD. * jfjoch_writer: Clean-up of HDF5 routines to better handle issues. Reviewed-on: #55 1.0.0-rc.145	2026-05-06 21:50:02 +02:00
leonarski_f	7d34e8a049	v1.0.0-rc.144 (#54) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Improve performance of preview JPEG image generator at receiver startup (saving about 150 ms on measurement start for 16M) Reviewed-on: #54 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.144	2026-05-01 17:06:36 +02:00
leonarski_f	6e0bb971ac	v1.0.0-rc.143 (#53) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. jfjoch_broker: Avoid copying gain calibration together with DiffractionExperiment Reviewed-on: #53 1.0.0-rc.143	2026-04-30 22:16:50 +02:00
leonarski_f	87fde1b32e	v1.0.0-rc.142 (#52) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * Support for newer CUDA architectures (notably Blackwell); minimum CUDA version 12.8 * Minor changes to jfjoch_process, jfjoch_fpga_test and jfjoch_lite_perf_test to make them more consistent Reviewed-on: #52 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-30 16:47:53 +02:00
leonarski_f	d760b12a18	v1.0.0-rc.141 (#51) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Azimuthal integration mapping is generated with parallel computations, significantly reducing setup times * frontend: Fix selection of FFTW in indexing settings Reviewed-on: #51 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-30 13:04:54 +02:00
leonarski_f	239a441ee6	v1.0.0-rc.140 (#50) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: For DECTRIS detectors, ZeroMQ link is persistent, to save time for establishing new connection * jfjoch_broker: Minor bug fixes for rare conditions Reviewed-on: #50	2026-04-29 21:40:22 +02:00
leonarski_f	4878318c27	v1.0.0-rc.139 (#49) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Further reduce startup time for DECTRIS detectors by selectively modifying SIMPLON parameters on `/start` * jfjoch_broker: Further reduce startup time for DECTRIS detectors by not setting beam center and detector distance via SIMPLON API on '/start' * jfjoch_broker: Add an extra message to ZeroMQ puller ready to monitor Lite worklow preparation time * jfjoch_broker: Image buffer configuration is postponed for Lite receiver flow till start message is received * jfjoch_broker: Use nanoseconds internally for frame/image/readout time * jfjoch_broker: Extra messages added for receiver operation (to be removed after debugging finished) * jfojch_broker: Improve profiling of different data analysis steps * jfjoch_broker: Record integration reflection count * jfjoch_broker: Fix bug where ZeroMQ preview frequency was confusing time units (micro vs. milliseconds) * jfjoch_broker: Fix bug where '/wait_till_done' got deadlocked * jfjoch_writer: Fix confusion between NaN and zero in floating-point datasets **Breaking changes**: detector definition is now using nanoseconds to define minimum frame time, minimum count time and readout time. Reviewed-on: #49 1.0.0-rc.139	2026-04-29 09:50:50 +02:00
leonarski_fandtakaba_k	230480e390	v1.0.0-rc.138 (#48) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. jfjoch_broker: Cleanup DECTRIS start-up code to enable a shorter start time jfjoch_broker: Allow for asynchronous start to allow overlapping detector configuration with other beamline preparations jfjoch_broker: Goniometer axis name is converted to lowercase jfjoch_broker: Fix bug, where wrong HTTP error codes were returned jfjoch_broker: Improve sigma estimation during merging (K. Takaba) --------- Co-authored-by: takaba_k <kiyofumi.takaba@psi.ch> Reviewed-on: #48 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.138	2026-04-27 19:56:14 +02:00
leonarski_f	c981e1b91c	v1.0.0-rc.137 (#46) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Better track time for each operation in the processing stack * jfjoch_broker: Rewrite preprocessing of diffraction images in the non-FPGA workflow to better use GPUs (work in progress) * jfjoch_broker: Remove ROI calculation in the non-FPGA workflow (work in progress) * jfjoch_viewer: Toolbar displays image number starting from 1 (instead of 0) Reviewed-on: #46 1.0.0-rc.137	2026-04-25 19:59:21 +02:00
leonarski_f	c1c170112c	v1.0.0-rc.136 (#45) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Improve logic regarding indexing architecture and thread pools (work in progress). Reviewed-on: #45 1.0.0-rc.136	2026-04-20 11:54:33 +02:00
leonarski_f	bb9f5c715f	v1.0.0-rc.135 (#44) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * Multiple small bug fixes scattered across the whole code base. (detected with GPT-5.4) * jfjoch_viewer: Improve image render performance Reviewed-on: #44 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.135	2026-04-16 11:59:59 +02:00
leonarski_f	4a852b4d6b	v1.0.0-rc.134 (#43) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Add better locking for detector object - should help, when detector initialization takes too long * jfjoch_writer: Enable writing single, integrated HDF5 file with both data and metadata * XDS plugin: Add generation of Jungfraujoch plugin for XDS * CI: Add tests with XDS and DIALS (`xia2.ssx`) Reviewed-on: #43 1.0.0-rc.134	2026-04-09 13:30:47 +02:00
leonarski_f	81bd9a06a1	CI pipeline upgrade (#42) ... Updates to CI pipeline * New docker image for Ubuntu 22.04 with CMake 3.26 * New docker image for Rocky 9 with DIALS 3.27 * New automated test to check for DIALS processing with xia2.ssx Reviewed-on: #42	2026-03-28 20:06:23 +01:00
leonarski_f	6133da1377	v1.0.0-rc.133 ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Use httplib for HTTP server instead of Pistache * jfjoch_broker: Drop OpenSSL support * jfjoch_broker: Base work for multi-lattice support in the future * Update dependencies to more recent versions (spdlog, HDF5, Catch2, httplib) Reviewed-on: #41 1.0.0-rc.133	2026-03-26 20:50:33 +01:00
leonarski_f	2ab9deb20b	v1.0.0-rc.123 (#40) ... Documentation update Reviewed-on: #40 1.0.0-rc.132	2026-03-12 12:17:11 +01:00
leonarski_f	166fcdb68f	v1.0.0-rc.131 (#39) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Fix bug in saving JUNGFRAU calibration (pedestal/pedestalRMS) * jfjoch_viewer: Fix calibration (pedestal) images being open flipped * jfjoch_process: Add space group detection (EXPERIMENTAL) Reviewed-on: #39 1.0.0-rc.131	2026-03-07 11:34:04 +01:00
leonarski_f	928789a67c	v1.0.0-rc.130 (#37) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Rotation indexer has two retries if failes * jfjoch_broker: Rotation indexer handles small number of rotation images (like test shot) * jfjoch_broker: Integration calculates background mask based on R2 radius * jfjoch_process: HDF5 files are not saved by default Reviewed-on: #37 1.0.0-rc.130	2026-03-06 14:38:56 +01:00
leonarski_f	64002f1e29	v1.0.0-rc.129 (#36) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Significant improvements in TCP image socket, as a viable alternative for ZeroMQ sockets (only a single port on broker side, dynamically change number of writers, acknowledgments for written files) * jfjoch_broker: Delta phi is calculated also for still data in Bragg prediction * jfjoch_broker: Image pusher statistics are accessible via the REST interface * jfjoch_writer: Supports TCP image socket and for these auto-forking option Reviewed-on: #36 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.129	2026-03-05 22:13:12 +01:00
leonarski_f	3036b1d37f	v1.0.0-rc.128 (#35) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Handle properly reuse of image buffer locations * jfjoch_broker: Fix bug in counting idle slots * jfjoch_broker: Force obtuse angle for monoclinic cells * jfjoch_process: Change scaling refinement tolerance Reviewed-on: #35 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch> 1.0.0-rc.128	2026-03-03 22:24:44 +01:00