175 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5.5	0f560ecddc	docs: the stills workflow figure, overview and methods for rc178's stills ... The stills pipeline figure keeps its layout and adds what rc178 does: the input box lists CXI and XTC, the geometry box is the beam centre decided on the frames and, with a cell, the distance and the module placement; the pre-scan reads the saturation level; the P1 merge keeps one crystal form. RUGNUX_OVERVIEW's stills paragraph says the same in prose. Methods: §1.4 describes the stills centre and distance hypotheses, a new §1.7 the saturation level read off the frames, and a new §7.7 a given cell as a starting point, the crystal-form filter and the module placement with its gauge. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015CeEGgpKdfkCTJb3YNMJcu	2026-10-21 00:15:42 +02:00
leonarski_fandClaude Opus 5.5	2bd3616388	Merge still-battery into rc178: the still battery and the external stills test data ... Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015CeEGgpKdfkCTJb3YNMJcu	2026-10-21 00:10:43 +02:00
leonarski_fandClaude Opus 5.5	063a63e55d	Merge rc178-version into rc178: v1.0.0-rc.178 and its CHANGELOG ... Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015CeEGgpKdfkCTJb3YNMJcu	2026-10-21 00:10:43 +02:00
leonarski_fandClaude Opus 5.5	26efa8c395	rugnux stills: masks in the data files themselves and by bits, a sub-unity gain left alone, HDF5 probed quietly ... - --mask-good / --mask-bad take [<file>:]<dataset>[@<bits>]: without a file the dataset is read from each data file (a per-frame mask stored beside the frames, as a Cheetah CXI holds it), and <bits> says which bits mark a pixel bad (or good) - what a CrystFEL geometry's mask/mask_good/mask_bad said, now that the geometry file gives module geometry only. - A gain the background shows at or below one detector unit per photon is not applied; such frames stay in detector units, as a CCD's do. Scaling a low-gain Rayonix's frames up by it cost one PAL set most of its indexing (69% -> 33%). - The HDF5 stills readers ask H5Fis_accessible with the error stack silenced before opening a file, so an XTC stream offered to them no longer prints HDF5's diagnostics. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015CeEGgpKdfkCTJb3YNMJcu	2026-10-21 00:00:43 +02:00
leonarski_fandClaude Opus 5.5	ebce906025	Serial XFEL stills inputs: readers from the files themselves, module geometry and its refinement ... Combines the stills reader and module work (stills-readers, stills-modgeom, stills-euxfel) onto rc178 with the owner's decisions for this release: - Inputs are files, never a directory; several files of one format are one dataset (the multi-input CLI of the previous commit), so every reader takes an explicit list: JFJochXFELReader::ReadFiles, ReadCXI, ReadPanelTable and JFJochXTCReader::ReadFiles take std::vector<std::string>; ListFiles and xtc::CollectStreams are gone, CanRead* accept a regular file only. - One HDF5 frame reader (JFJochCrystFELReader -> JFJochXFELReader) parameterised by what the file holds: per-shot groups or a 3D stack, a /metadata panel table (posx/posy/angle, pixel size, nominal camera length, pixel mask: as SACLA writes), a Cheetah CXI single panel (square frame; a tiled slab is refused with a message). At most 8 files open; every file checked against the first. Signed 32-bit decode, per-frame 3D masks, panels at their own coffset (from the EuXFEL work). - Frames stored one chunk each are read the way the NXmx reader reads its images: only the chunk's place is asked of HDF5 under its lock (H5Dget_chunk_info_by_coord), the bytes are read through HDF5ImageSource::RawFile (positional, no lock) and decoded outside it - deflate(+shuffle) by zlib, bitshuffle/LZ4 (and zstd, plain LZ4) by CompressedImage's decoders. Bitshuffle/LZ4 used to go through HDF5's filter under the global lock, one frame at a time. - LCLS-I XTC (Rayonix): wavelength from the beam record, pixel size from the Rayonix model and binning, only --detector-distance needed; damaged/compressed frames skipped, a truncated last event dropped; std::ifstream, no POSIX calls: builds with MSVC. No DIALS .expt support at all. - CrystFEL .geom: module geometry only (panel ranges, fs/ss, corners, pixel size, coffset, data path) and optionally the camera length; everything else is ignored with a note in the log. - --mask-good / --mask-bad <file>:<dataset>: a mask array in another HDF5 file, in the frames' stored layout (what a .geom's mask_file used to give). - Gain measured on the background for panel-table and CXI input that states none (--gain overrides). - Detector modules from explicit geometry only (DetectorModules: the reader's panels, an NXmx file with one NXdetector_module per module, or --module-geometry); never from the image. Spots and predictions are mapped through the modules, the image is not re-assembled. - Module refinement in the stills bundle adjustment (Ceres; per-module shift and in-plane turn, gauge on mean shift/turn/scale and on the two tilt-like patterns when the tilt is refined; adopted only where it predicts held-out frames better). Applied for a foreign multi-panel detector (panel table, .geom panels); for a JUNGFRAU measured and reported only. Written to <prefix>_modules.h5 (NXmx NXdetector_module groups), read back with --module-geometry. - A panel-table file's camera length is nominal: with a reference cell it is refined from the cell. - Broker and writer output unchanged: masters keep the single NXdetector_module group, the start message carries no module list. Tests: [CrystFELGeometry], JFJochXFELReader_*, JFJochXTCReader, [JFJochMultiReader], [CellPopulation], SaturationCeiling_*, [DetectorModules], RefineGlobalGeometry_ModulePlacement, [reindex], Sublattice. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015CeEGgpKdfkCTJb3YNMJcu	2026-10-20 23:30:48 +02:00
leonarski_fandClaude Opus 5.5	6557ba87f4	rugnux: several stills inputs in one run; inputs are files, never a directory ... Every input is a file named on the command line, read in the order given (a shell glob gives them sorted by name); a directory is refused with the glob form to use instead. - Several Jungfraujoch/NXmx masters of stills are read as one run (JFJochMultiReader): their images one after another, the pixel masks combined, the per-image efficiency placed at each input's images. They must share the detector, wavelength (0.1%), distance (0.1 mm) and beam centre (1 px), since stills geometry refinement refines one geometry for all frames; rotation sweeps are refused. The log gives the indexing rate of each input beside the run's (ProcessResult::image_indexed). - SACLA HDF5 / CXI (JFJochCrystFELReader::ReadFiles, ReadCXI, Open) and XTC (JFJochXTCReader::ReadFiles) take the list of files instead of scanning a directory; CanReadCXI and xtc::CanRead accept only a file; ListFiles and xtc::CollectStreams are gone. - Several inputs must be one format, --mode mx, and stored files (no broker, no --simulate-live); one frame of a CBF/marCCD/SMV sweep still names the whole sweep. Validated: two Jungfraujoch lysozyme stills runs together (49,920 frames, known cell) 57.1% indexed (59.3% / 54.9% per run), 1.22 A, CC1/2 0.986, R_split 8.8%, REFMAC R/R-free 0.253/0.269 against 0.257/0.273 for the earlier hand-built combined master. Rotation: 5reo and lyso_x10sa_90deg_1 unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015CeEGgpKdfkCTJb3YNMJcu	2026-10-20 23:30:17 +02:00
leonarski_fandClaude Opus 5.5	59332d4694	tools/battery: the still battery - serial (XFEL stills) datasets against their depositions ... still_battery.py runs the public serial datasets of still_manifest.json with their deposition's cell and space group, refines the deposited model against each merge with dimple and the deposition's own free set, and reports per set: facility, beamline, detector, PDB, images, indexing rate, R_split, our R-free beside the deposition's published R-free, the wall time of the rugnux command, ms per image, the input's I/O floor (bytes over 5 GB/s) and how much of the input was already in the page cache. It shares battery.py's site config (a "still" section), verbs (run, compare, report, list, keep) and run-directory layout; run directories carry "still-" in their label. The datasets (CXIDB 243, 237, 236, 86, 90, 222, 242, 83, 152, 103, 213; dark and ground-state entries only) are listed with their verified DataCite DOIs in docs/EXTERNAL_TEST_DATA_STILLS.md, linked from EXTERNAL_TEST_DATA.md; CXIDB is credited in ACKNOWLEDGEMENT.md. The SwissFEL sets also run as int16 bitshuffle/LZ4 copies, made with still/float32_to_int16.py. The stray scripts in the repository root move under tools/battery: rugnux_stills_ab.py and its dataset template to still/, rugnux_anomalous.py beside battery.py; docs/TESTS.md follows. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015CeEGgpKdfkCTJb3YNMJcu	2026-10-20 23:04:43 +02:00
leonarski_fandClaude Opus 5.5	d49210354b	CHANGELOG: 1.0.0-rc.178 ... Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015CeEGgpKdfkCTJb3YNMJcu	2026-10-20 23:00:28 +02:00
leonarski_fandClaude Opus 5.5	02dbdb0b9d	v1.0.0-rc.178: version bump ... VERSION and the strings update_version.sh rewrites (API spec, python and TypeScript clients, C++ model, Redoc page, docs/conf.py, FPGA HDL and PCIe driver). The regenerated clients and Redoc page also pick up rc178's API changes made since the last regeneration (rugnux live settings and model without a bearer token, the live status fields). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015CeEGgpKdfkCTJb3YNMJcu	2026-10-20 23:00:10 +02:00
leonarski_fandClaude Opus 5.5	6a1d859d49	Stills merge: R_split and a frame-split CC1/2, per shell and overall ... Serial crystallography quotes R_split and a CC1/2 whose half-sets keep each crystal whole (CrystFEL's partialator), and rugnux's stills report had neither, so its numbers could not be set beside CrystFEL's. MergeOnTheFly now also sums every frame's observations into the frame's own half (the existing per-image hash preference), and MergeStats reports from those two means R_split = (1/sqrt 2) sum|I1-I2| / (1/2 sum(I1+I2)) and their CC1/2. They are printed as a "Serial statistics" table under the shell table (also in the --report-resolution table) and as R_SPLIT / CC_HALF_SPLIT and their REFRES_ keys. The balanced per-reflection split behind CC_HALF is unchanged, and so is everything decided on it (resolution cut, space-group search, pass gates). Rotation output is unchanged: RotationScaleMerge does not fill the new fields and the table is not printed. On a 4000-frame jet subset over 30-1.5 A: CC1/2 0.830, R_split 31.8%, against 0.834 / 31.3% computed by hand from two separate even/odd runs and 0.842 / 30.5% from CrystFEL on the same frames. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-20 15:40:30 +02:00
leonarski_fandClaude Opus 5.5	9e09cd4b3d	broker: initialize drops the dataset's bearer tokens and everything they protected ... Initialize is the fresh start between users. It already cleared the images, plots, scan result and live rugnux status; it now also drops the tokens, resets the dataset settings (name, file prefix, unit cell, ...) to their defaults and forgets the last collection followed through /live/events, so after it nothing of the previous dataset is readable, with or without its token - the broker is as open and as empty as a freshly started one. The auth test checks that after /initialize the data-collection statistics and the /statistics aggregate are open and no longer carry the previous dataset's name. SECURITY.md also lists /rugnux/status among the protected endpoints. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01PXc1zD1yxHqaR1DGdCTHL4	2026-10-20 12:16:32 +02:00
leonarski_fandClaude Opus 5.5	147f750c90	broker: rugnux live settings and model need no bearer token ... GET/PUT /config/rugnux and PUT/DELETE /config/rugnux/model prepare the next collection and expose nothing of the current one, so they are open like the rest of the configuration. Protecting them meant the next user needed the previous dataset's token to set up their own run. /rugnux/status, which reports the current collection, stays protected. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01PXc1zD1yxHqaR1DGdCTHL4	2026-10-20 07:43:47 +02:00
leonarski_fandClaude Opus 5.5	1949155c12	Rotation: a blank sweep end is trimmed before scaling, and a delta-CC1/2 stretch takes the sliver it leaves at an end (RESULT-CHANGING) ... Shutters that open late or close early, and beams that go off, leave frames at the ends of many sweeps with no exposure at all. Until now those frames went into the scaling like any other: on a CCD their noise, divided by an incident flux of ~0.005, made the partials loop walk their scales toward zero until the 50x collapse guard dropped them - or, if the loop stopped first, merged one as noise, which delta-CC1/2 then removed with its whole 10 deg batch and reported as SWEEP_GAPS (3p85, frames 338-359). On photon-counting detectors the blank frames fitted G = 0, escaped the guard and were reported as merged although nothing of them was (cytc_x10sa, myob_x10sa, thau_micromax_pink, lysoI_micromax_pink, 3p85). TrimBlankSweepEnds (RotationScaleMerge.h) walks in from each end and clears the reflections of every frame that - recorded no diffraction: as many of its reflections stand more than 3 sigma below zero as above it (a sign count, so no sigma calibration is needed and a slight background bias cannot hide the strong reflections), and that excess is 3 sigma clear of the run's typical frame - so a crystal too weak for one frame to show it is never trimmed; and - had no beam: its mean background is nearer to none than to the run's typical frame. That is what keeps a crystal leaving the beam, which also records nothing but still scatters, in the sweep ledger as a finding (insu_I_x06da_ref, 9zm0, 9fhc, 5reo are untouched). No stretch length: one blank frame is as blank as twenty. Partly exposed first/last frames recorded diffraction and stay (7tcd, 7q6j, 9z72, lyso_micromax_pink). It runs on the integration outcome before the overload count, so the merge, post-refinement and unmerged output all see the trimmed sweep, and in --mode scale on the stored reflections. The report gives FRAMES_BLANK_START/END and a prose line - information, no warning; the frames count as rejected. The sweep ledger looks for degraded stretches, and reads its running medians, only between the first and last frame with data. Delta-CC1/2: a convicted stretch that stops short of a sweep end by less than one rocking event takes the rest, where those frames read as the stretch does (5reo: 331-396 rejected, 397-399 were left in as a three-frame weak_diffraction range with its own warning). Battery --only, 31 sets, tol5 f217f180a -> this commit: no space group, d_min or verdict changes; merged statistics identical within 0.001 except 5reo (R_meas 0.236 -> 0.231, ISa 23.0 -> 23.3, R-free 0.2013 -> 0.2004, warnings 3 -> 2). Trimmed: 3p85 0/19 (+3 empty frames; collapse-guard drops 13 -> 0), 6w4h 0/5 (guard 5 -> 0), 7rji 0/4 (delta-CC1/2 no longer removes 3406-3412, two of which diffracted: 7 -> 0), cytc_x10sa 0/2, thau_x10sa_* 0/1-2, myob_x10sa 0/1, lyso_x10sa_strong 0/1, 8a1a 0/1, lyso_micromax_mono 1/0, lysoI_micromax_pink 2/0, thau_micromax_pink 1/0. Controls (11if, 5f6m, 6moj, 8u0i, 9fhc, 9z44, 9z72, 9zm0, 6iu6, insu_I_x06da_ref, myob_x06da_split, lyso_x06da_half_image, thau_bl1a_4p6keV) trim nothing and are unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01PXc1zD1yxHqaR1DGdCTHL4	2026-10-20 02:18:19 +02:00
leonarski_fandClaude Opus 5.5	4620130f71	RotationScaleMerge: scaling loops run to an rms step of 1e-5, accelerated from 1e-2 (RESULT-CHANGING) ... The per-frame scaling tolerance goes from 1e-3 to 1e-5, and the Anderson onset (also the round the fulls loop keeps its cross-validated lambda) becomes an absolute 1e-2 instead of 10x the tolerance. Evaluated on 35 merged sets (ci tier + scaling-audit sets), on top of the loop fixes: - plain 1e-3: 8913 iterations, 38 s of loop time on GPU, 7 loops at the 100-round cap; - plain 1e-5: 35212 iterations, 120 s, 17 loops at the cap; - Anderson 1e-3 (previous default): 3715 iterations, 16 s, merged intensities as far from the converged ones as plain 1e-3 (median 0.13%, max 4.3%); - Anderson 1e-5 (this commit): 6507 iterations, 27 s, longest loop 89 rounds, merged intensities within 0.2% of plain 1e-5 and identical SG, d_min, CC1/2, ISa, R_meas, R_free. No space group or verdict changes in any mode. The converged merge is not measurably better against the references, but it no longer depends on where a loop happened to stop. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01PXc1zD1yxHqaR1DGdCTHL4	2026-10-20 02:18:19 +02:00
leonarski_fandClaude Opus 5.5	0894230671	Anderson: accelerate a scaling loop only near its fixed point, and never again once its step grows (RESULT-CHANGING) ... The Anderson commit before this one changed three rc176 battery results, which is why it was reverted there. One of them is the acceleration's own doing: on a split myoglobin sweep (P2_1, ISa 2.5) the partials loops never settle - one walks at a step of ~2e-2 for as long as it runs - and the fulls loops walk from their first round (their cross-validated lambda moves every round, so the map itself is not fixed). Restarting the history whenever the step grew only rebuilt a one- or two-round history and extrapolated along the walk: the stalled loops ended somewhere else, the pre-pass fulls smoothing window went from ~7 frames to ~1, and CC1/2 fell 0.701 -> 0.595. Two rules now confine the acceleration to the regime it is for - a map contracting to its fixed point: - a loop is accelerated only once its plain step is below ten times the tolerance (1e-2); - the first round whose weighted residual grew turns the acceleration off for the rest of the loop (AndersonMixing::Stopped), instead of restarting it. A loop that walks therefore stays the plain loop it was in rc176. The growth rule alone gave CC1/2 0.625; with the onset, 0.701, as rc176. Measured against rc176 bc191bb80 (GPU, workstation): - myob_x06da_split: P2_1, CC1/2 0.701, d 1.81 A - as rc176; 481 -> 257 scaling iterations. - 7qij 434 -> 126 iterations, 9v16 273 -> 101, same space group and statistics. - ci tier (29 sets, no null model): 28 unchanged beyond noise; sum of times 580 -> 585 s (9gdj +9 s, below). The two other changes are NOT Anderson's and stay: - insu_I_x06da_weak I23 -> I222: the all-observations search refuses I23 on a merge chi2 ratio 2.08 against a 1.85 bound; plain scaling converged to 1e-5 gives 2.07-2.09 and refuses it too. Only the plain loop stopped at 1e-3 passed - the bound was set on unconverged scaling. - 9gdj +9 s, same answer: the early beam-centre comparison's "loses beyond noise" margin (-0.002 against 2 sigma 0.0016) moves by ~0.07 between scaling paths, so the converged loop no longer takes the shortcut and both centres are judged on all frames; the file's centre is kept either way. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01PXc1zD1yxHqaR1DGdCTHL4	2026-10-19 18:49:24 +02:00
leonarski_fandClaude Opus 5.5	138abafa14	RotationScaleMerge: Anderson-accelerate the per-frame scaling loops (RESULT-CHANGING) ... The partials and fulls scaling loops are alternating least squares that converge linearly: over the rc176 battery's 2527 loops a round shrinks the step by a median 0.86 (partials) and 0.93 (fulls), up to 0.98, so the 1e-3 step tolerance stopped them 0.6% / 1.4% (median) and up to 17% (fulls p90) short of their fixed point, and 313 of them were stopped as "stalled" when they were only slow - a stalled fulls loop also skipped ShrinkToRestrained. Each round is now accelerated in log G by type-II Anderson mixing (Walker & Ni 2011), depth 5, each frame weighted by its observation count as in the step test; frames below the credible floor take the plain round's scale. The history is dropped when the weighted residual grows or the set of fitted frames changes (new AndersonMixing class, unit-tested on a synthetic slow ALS loop). The mixed scales are gauge-pinned again before the rescale, and the stop test is unchanged: it reads the round's residual F(x) - x, so "stalled" now means a loop that does not settle under acceleration either. Measured (CPU, -N 8): 4nwv 311 -> 82 iterations over 9 loops, 9v16 76 iterations over 11 loops, the same counts as the env-gated prototype on tail-solver; no history restart fired on either. Depth 3/5/8 give 92/91/90 iterations on 4nwv. A restart on a change of the fulls loop's cross-validated lambda was tried and gave nothing (83 vs 82). Same space group and merging statistics on 4nwv and 9v16. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01PXc1zD1yxHqaR1DGdCTHL4	2026-10-19 18:49:24 +02:00
leonarski_f	7ed32b899f	v1.0.0-rc.177 (#87) ... * jfjoch_broker: Faster live Rugnux analysis, with the GPU indexers prepared at the start of a collection and kept between collections; Rugnux no longer writes `.ccp4` maps (the map coefficients are in `<prefix>_maps.mtz`). Reviewed-on: #87 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-10-19 16:07:31 +02:00
leonarski_f	8261b7354e	v1.0.0-rc.176 (#86) ... * jfjoch_broker: Optional live Rugnux analysis of DECTRIS rotation collections inside the broker, with merged data, maps and the placed model written beside the master file, the rotation lattice in the scan result, and a "Rugnux live" tab and dashboard row in the web frontend. * Rugnux: Faster processing, with molecular replacement and model validation spread over several GPUs and run on the Apple GPU on macOS. * Rugnux: The polarization stated in miniCBF and d*TREK headers is used, twinned crystals' space groups are decided more reliably, and a run that finds no lattice still reports every image. Reviewed-on: #86 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-10-19 07:03:28 +02:00
leonarski_fandFilip Leonarski	19b135186d	v1.0.0-rc.175 (#85) ... * Rugnux: Processes a collection live while jfjoch_broker writes it (`rugnux <master.h5> <broker URL>`). * Rugnux: Processing starts on the first images and confirms its choices once all are in, so analysis can begin during collection. * Rugnux: Faster processing, especially on servers with several GPUs and CPU sockets and on computers without a GPU (`--no-gpu`, macOS). * Rugnux: Uses much less GPU memory, so large data sets stay on the GPU of smaller cards, and a data set too large for the card is processed on the CPU instead. * Rugnux: On macOS, Bragg integration runs on the Apple GPU. * Rugnux: Better handling of twinning and pseudo-symmetry, with the twin hypothesis written as `<prefix>_twin_<SG>.mtz`, and a wrong `--model` no longer confirms the data or decides the hand. * Rugnux: `--model` accepts predicted (AlphaFold) models and falls back to molecular replacement when the model is not placed as a rigid body (experimental `--mr` forces it), settling space group, hand and twinning and writing a different answer as `<prefix>_mr.mtz`. * Rugnux: Molecular replacement is faster and settles the space group in more cases with several copies in the asymmetric unit. * Rugnux: Deposition-ready mmCIF, a richer report, and numbered steps on the terminal with the full log in `<prefix>_log.txt`; `_P1.mtz`, `--estimate-beam-center` and `--beam-center-search` are removed. * Rugnux: The beam-stop shadow is found correctly on tilted detectors. * Rugnux: Stills files that record a stationary goniometer axis get the default stills geometry refinement. * jfjoch_viewer: "Analyze dataset" uses the same defaults as a bare `rugnux <file>`, and shows the results of processed CBF, marCCD and SMV sweeps. * jfjoch_viewer: The Files panel refreshes on F5 and every few seconds, and the plot type and other selections stay put during live collection. * jfjoch_writer: Memory stays bounded and old data files are closed efficiently on long runs, any failure ends the run in an error state the broker is told about, and the master file appears only after its data files; the ZeroMQ pusher logs when a stalled writer makes it drop images. * Fixes: The TCP image pusher no longer blocks the broker's receiver, GPU out-of-memory failures stop with a clear message, and the XDS plugin masks module and chip edges. --------- Co-authored-by: Filip Leonarski <jungfrau@filips-mac-mini.home> Reviewed-on: #85 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-10-16 15:34:43 +02:00
leonarski_f	a395f358ef	1.0.0-rc.174 (#84) ... * Rugnux: Performance improvements on GPU and CPU (more of the pre-scan and of scaling on the GPU, faster CPU spot finding and crystal refinement), with unchanged results. * Rugnux: More robust processing - patches of persistently hot pixels are masked, an inconsistent merge triggers a retry at the measured beam centre, and builds targeting different CPU levels give the same results. * Rugnux: Improved scaling and merging - reflections with an overloaded pixel are dropped, as in XDS, sparse rotation sweeps are scaled more reliably, and French-Wilson amplitudes use an anisotropic Wilson prior. * Rugnux: Improved space-group determination - glide planes in groups without a centre of symmetry, screw axes from short or weak axial rows kept when a higher group is adopted, and more reliable decisions on twinned and pseudo-symmetric crystals. * Rugnux: Improved small-molecule processing - spots that grow wider than the integration disk and split spots are integrated over their measured footprint, sparse lattices are integrated on every frame, and the `.hkl` file holds unmerged scaled reflections (SHELX HKLF 4). * Rugnux: Reads Rigaku d*TREK SMV images (Saturn CCD), including detector 2theta and encoded pixel overflows; home-source (rotating-anode) datasets were added to the validation battery. * jfjoch_viewer: Fixed processing failing at the end with "Wrong JPEG library version" on Linux; the merge window shows the space group with proper subscripts and a checklist of crystal pathologies. Reviewed-on: #84 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-10-06 14:03:18 +02:00
leonarski_f	84228bf8be	v1.0.0-rc.173 (#83) ... * jfjoch_broker: Optional per-dataset authentication - statistics, images and plots can require a bearer token, which jfjoch_viewer supports. * jfjoch_viewer: Dark mode and a theme-matched colour scheme, a magnifier panel, and simpler contrast and background controls. * Rugnux: Multiple performance improvements on GPU and CPU (CPU-only processing up to 40% faster, faster image decoding on ARM), with unchanged results. * Rugnux: `--model` rigid-body refinement runs on the GPU, and the model-validation check is faster and more reliable. * Rugnux: Improved scaling and merging - error model, outlier rejection, absorption correction and French-Wilson amplitudes now agree more closely with XDS and ctruncate. * Rugnux: Improved integration - radial background on powder and ice rings, crowded rotation data keep their reflections, and CPU-only builds integrate large unit cells as GPU builds do. * Rugnux: More robust detector geometry - measured beam centre, X-ray bandwidth and goniometer rate, and geometry refinement accepted only on significant evidence. * Rugnux: Merged files are written in the standard setting, or in the setting of a reference MTZ, structure-factor mmCIF or model, with its free-R flags. * Rugnux: Richer report - ice and powder rings, further lattices, superstructure candidates and mosaicity, with warnings worded as prompts to check. * Rugnux: Clear error messages when a data set needs more GPU or host memory than is available. Reviewed-on: #83 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-29 15:57:32 +02:00
leonarski_f	6dfe065365	v1.0.0-rc.172 (#82) ... * Fixed `jfjoch_broker` cancelling every data collection with a CUDA "out of memory" error after long operation: GPU memory no longer leaks with each collection. * Rugnux scales a rotation sweep until the per-frame scales settle instead of for a fixed three rounds, and says so when they did not - merged intensities, and the space group, resolution cut and frame rejection read off them, change accordingly; `--scaling-iterations` is now the cap on that loop (default 100). * Rugnux places every frame of a marCCD, SMV or miniCBF series at the spindle angle its own header states, so a series with missing frames, or with angles written modulo 360, is no longer read at the wrong geometry or refused. * Every rotation run writes two diagnostic files beside its reflections: `<prefix>_detector.jpg`, the detector projection with the pixel mask and the detected beam-stop shadow drawn on it, and `<prefix>_plot.txt`, one row per image. Reviewed-on: #82 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-22 06:48:37 +02:00
leonarski_f	30b6800289	v1.0.0-rc.171 (#81) ... * Rugnux: basic support for CCD images (marCCD, SMV) and for gzipped miniCBF. * `jfjoch_viewer`: opens the CCD formats, and fixes to the dataset plots. * Documentation updates. Reviewed-on: #81 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-17 14:42:52 +02:00
leonarski_f	cb5a2f032a	v1.0.0-rc.170 (#80) ... * Fixed a `jfjoch_broker` crash during indexing: sorting no longer misbehaves on non-finite values, and GPU FFT indexer kernel launches are now error-checked. * rugnux needs about a third less peak memory to scale, merge and post-refine rotation data, with identical results. * `rugnux --model`: the placed coordinate file carries the space group its own coordinates obey, and says so when that is not the group the reflection files beside it carry. * `jfjoch_viewer`: fixes in the dataset plots, inspector and layout; spot markers lose their black outline by default (a checkbox under "Image features" restores it) and the highest-pixel markers are white boxes around the pixel. Reviewed-on: #80 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-16 18:17:46 +02:00
leonarski_f	9aae0c2ba7	v1.0.0-rc.169 (#79) ... * Building Jungfraujoch no longer needs zlib or Eigen installed on the machine, and the dependencies the build fetches are pinned and updated to current releases. * rugnux: improvements in indexing, lattice selection and geometry post-refinement, which index crystals that previously returned no lattice and keep the better of the two geometries a run measures. * rugnux: improvements in beam-centre measurement, beam-stop detection and space-group determination. * rugnux: the unit cell reported with a determined space group now obeys that group - a cell whose symmetry was confirmed from the intensities is re-refined under it, and a cell the group cannot describe is reported with a warning rather than as it stands. * rugnux drops the stretches of a rotation sweep whose removal measurably improves the merged intensities and reports what became of every frame, and decides the resolution cut on the crystal's own diffraction rather than on its ice rings. * The rugnux results report is machine-readable - every line that is not `KEY= value` data starts with `#` - and states the build it was written by, its authorship and its terms of use (`REPORT_VERSION= 8`). * `jfjoch_viewer`: improvements in the file manager (CBF frames beside HDF5 datasets, a remembered root), the dataset plots, the inspector and the image statistics, plus a settable font size, a view of the rugnux results report, usable performance over a remote display (`ssh -X`) and a reset of all settings to defaults; the reciprocal-space window is removed. * Broker fixes around DECTRIS collections and dark-mask calibration: re-initialising after a run that never started no longer freezes the broker, a cancelled calibration is abandoned instead of reported as done, and a collection whose start message never arrives ends by itself. Reviewed-on: #79 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-15 17:09:31 +02:00
leonarski_f	77bc0cfe52	v1.0.0-rc.168 (#78) ... * rugnux is substantially faster - a corpus of 145 rotation datasets processes in about two thirds of the time - with identical results. * A crystal whose lattice looks more symmetric than it is because the beam centre is off is no longer processed on the wrong cell. * rugnux prints at startup, and writes at the foot of every results report, a short acknowledgement of the X-ray research community whose methods it implements and of the open-source projects it builds on; `ACKNOWLEDGEMENT.md` now ships in every package beside `LICENSE` and `THIRD_PARTY_NOTICES.md`. Reviewed-on: #78 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-10 13:51:16 +02:00
leonarski_f	a39fd29f77	v1.0.0-rc.167 (#77) ... * `rugnux --model` reports CC(model, data) - the correlation of the merged intensities with the placed, scaled model - by resolution shell, on the same shells as CC1/2, with the reflection count and a significance for each. * `rugnux --model` fits the model's scale, anisotropic B and bulk-solvent parameters on the working reflections only, so the R-free it reports is measured against a model no free reflection helped scale. * The bulk-solvent parameters of `rugnux --model` are searched over their physically meaningful range instead of being fitted without bounds, so a model is never scaled with a solvent term that has silently switched itself off. * The rigid-body placement of `rugnux --model` uses the same bounded bulk solvent as the reported fit, so a model is no longer placed against a target carrying a solvent term with no physical meaning. * `rugnux --model` puts the model into the data's own description of the lattice before placing it, so a model whose cell is written on other axes - I-centred where the run indexed C-centred, a different unique axis, a permuted orthorhombic cell - is placed rather than scored where it was read; `MODEL_CHANGE_OF_BASIS=` and `MODEL_SETTING_AS_READ=` report it when it happens. * The rugnux results report opens with a summary - `VERDICT=` (`OK`, `WARNINGS`, `UNUSABLE`, `FAILED`), `VERDICT_TEXT=`, `PATHOLOGY_FLAGS=` with one closed-vocabulary code per condition that warned, and the `WARNING:` lines, which used to close the file - and the sections after it are renumbered 1-5 with no gaps. * `rugnux --developer` writes the full results report - the pipeline-internal keys and the long explanations the default report now leaves out - and `--finalist-ledger` adds the evidence for every space group the search considered, not only the one it adopted. * The results report warns when the merged data carry no usable signal and when too little of reciprocal space was measured inside the fitted resolution, and omits `FITTED_RESOLUTION` where the CC1/2 curve it is fitted on never falls off. * rugnux detects translational pseudo-symmetry and reports it under the `PSEUDO_TRANSLATION` flag as `TNCS_DETECTED=` and the `TNCS_*` keys - a translation the merged data are exactly invariant under is reported as `UNDECLARED_LATTICE_TRANSLATION=` under `LATTICE_TRANSLATION` instead - and a detected pseudo-translation can no longer buy a false screw axis in the space-group search or hide a twin from the L-test (`L_TEST_VS_TNCS=`). * The space-group search determines glide planes from zonal systematic absences, so a non-Sohncke space group such as P 2_1/c or Pbca is named where the run previously stopped at its Sohncke subgroup; `SOHNCKE_SPACE_GROUP=` carries the best Sohncke group beside it on every run that searched, and a centre of symmetry is never claimed. * Where the cell metric carries more rotational symmetry than the Bravais class the indexer named, the extra rotations are put to the intensities and the space-group search is asked again on the metric's own cell - adopted only where the intensities confirm the higher symmetry - so a lattice that is nearly but not exactly hexagonal, or whose reduction landed in a sub-cell, still reaches its true point group. * Systematic-absence calls rest on the evidence rather than on counts: a screw axis whose absent class the data show extinct is no longer refused because a handful of reflections in it read as present, and `SPACE_GROUP_ALTERNATIVES=` no longer drops a candidate that differs only on a zone the sweep never measured. * A reference correlation measured on too few reflections is refused instead of scored zero, so a run given a reference MTZ is no longer reindexed on an operator that mapped almost everything outside the reference's coverage. * A frame counts as indexed from 6 spots on its lattice rather than 9, so a weakly diffracting crystal whose frames cannot carry 9 is no longer refused the lattice it fits; `--min-indexed-spots` overrides it. * `-C` accepts a known cell in any equivalent description - conventional or primitive, centred or not - instead of only the reduced primitive form, so a centred cell given the way it is published no longer makes the run report that it found no lattice. * Each reflection is corrected for the sensor's quantum efficiency at the angle it meets the detector (attenuation lengths from the NIST tables, which also fixes the spot-width parallax term on CdTe) and for the attenuation of the flight path between the sample and its pixel; `--flight-path air|helium|vacuum` declares the medium - default air, since no file states it - and the report says what was assumed and what it was worth. The unmerged MTZ records the factors in new `QE` and `FLIGHT` columns beside `LP`, so raw counts are `I / LP * QE * FLIGHT`, and `_process.h5` in new optional `qe` and `flight` datasets. * Rotation geometry post-refinement fits the crystal and the detector at once, against the observed spot positions and the observed rocking angles together, so the refined distance depends far less on how wrong the file's distance was. * A coarsely sliced sweep integrates correctly: partials are joined into one rocking event by angle rather than by frame count, so two crossings of the Ewald sphere are no longer summed into one full, and at 0.5 degrees per image or coarser the per-frame geometry refinement accepts a spot whose miss the exposure's own rotation accounts for. * `rugnux --mode scale` reports the detector tilt and direct beam of the geometry it re-scaled at, instead of zeros that read as a flat detector, and no longer warns that no image was indexed on a run whose lattice came from its input file. * Every rotation run that determined a space group and merged reports what the mounting cost: `SPINDLE_LOST_UNIQUE_FRACTION=` is the fraction (0-1) of unique reflections the mounting made unmeasurable under the measured point group, also written to the master as `/entry/MX/spindleLostUniqueFraction` and what the mounting warning fires on; `SPINDLE_SYMMETRY_AXIS_ANGLE_DEG=` / `SPINDLE_SYMMETRY_AXIS_ORDER=` describe the mounting in the `--developer` report. * Stills and grid scans carry a per-image `spindle_blind_fraction` - how much of a rotation sweep's blind cone this orientation would make unrecoverable, 0.5 and above calling for a second orientation - through the CBOR stream, HDF5 (`/entry/MX/spindleBlindFraction`), the plot and scan-result APIs, and the viewer and frontend plots; an absent value means the frame could not be assessed and is not a 0. * The results report's `REPORT_VERSION` is 7. Reviewed-on: #77 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-09 07:25:13 +02:00
leonarski_f	680c36c20d	v1.0.0-rc.166 (#76) ... * `rugnux --mode calibration` writes `<prefix>.json` beside the `.poni`, whose `dataset_settings` member is a `jfjoch_broker` `dataset_settings` body as it stands. * `rugnux` and `jfjoch_viewer` read PILATUS miniCBF sweeps natively, without conversion. * Masters written by other facilities open, including Eiger 1.x and third-party NXmx variants. * `rugnux` measures the beam centre on every run, and indexes with it when the file's value indexes nothing. * A detector swung out on a 2theta arm is placed where the file says it stands, and the calibration can hold the tilt fixed. * `rugnux` writes the unmerged MTZ by default, and a P1 merge beside it, so a wrong space group can be re-merged without reprocessing. * Significant improvements to symmetry handling in `rugnux`: the lattice, the point group, the setting and the systematic absences. * The `rugnux` report gives the resolution the CC1/2 fit reached, beside the range the reflections were written to. * The `rugnux` report gives the twinning statistics measured before the space group was decided, beside the ones measured after. * The `rugnux` report gives the strong-direction diffraction limit, and warns when CC1/2 is not monotone with resolution. * `rugnux` ranks screw axes on the evidence their absences carry, rather than on how many control reflections a candidate happens to have. * Twinning is no longer reported when the L-test contradicts it. * The `rugnux` report gives the detector tilt, the measured tilt and the direct beam beside the beam centre, and a post-refined beam centre is judged against the run's own measurement rather than the file's. * `--no-refine-tilt` holds the detector tilt at the value in the file, instead of zeroing it, when the calibration starts from the spots. * The `jfjoch_viewer` grid scan view draws the cells in the proportion of the scan steps, so the map has the shape of the scanned area. Reviewed-on: #76 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-02 21:17:31 +02:00
leonarski_f	511be0c366	v1.0.0-rc.165 (#75) ... * `rugnux --model` adopts the model's space group as a label where the data were merged in its enantiomorph, instead of reindexing the reflections - which swapped I(+) with I(-). * `rugnux --model` warns, naming the atom, when the anomalous density at the model's atoms comes out inverted, which means the data and the model are in opposite hands. * `rugnux --model` writes an anomalous difference map (`<prefix>_anom.ccp4`) when the merge kept the Bijvoet split, and names the ten model atoms it peaks highest on as `ANOMALOUS_SITE_01`..`_10`. * `MEAN_ATOM_DENSITY_SIGMA` is read from the map by cubic rather than linear interpolation and comes out around a tenth higher; it is no longer comparable with the figure earlier versions printed. * `rugnux --model` reads an mmCIF coordinate file as well as a PDB one, gzipped or not, taking the format from the file's content rather than its name. * A model `rugnux --model` cannot use is reported as a `WARNING:` line in the results report instead of only in the log. * The rugnux results report has a `10. MODEL VALIDATION` section when `--model` was given; `REPORT_VERSION` is 4, `WARNINGS` moves to section 11 and no existing key changed. * The rugnux results report records how the run was invoked, what it cost and what it ran on: `COMMAND_LINE=`, `WALL_TIME=` and `GPU_COUNT=` / `GPU=`. * rugnux says which GPUs it can see before it starts processing. * `rugnux --export-unmerged` also writes `<prefix>_unmerged.mtz` on a `--no-merge` run, and is ignored on a run with no output prefix instead of writing a file called `_unmerged.mtz`. * `/start` asks the writer whether the run can be written before the detector is armed, so a run whose master file already exists, or whose output directory cannot be created, is refused up front with the writer's own message. This needs the TCP image stream or the built-in HDF5 writer; the ZeroMQ stream is unchanged. * A calibration that fails goes to `Error` carrying the reason instead of `Inactive`, so `/wait_till_done` and `/wait_until_running` report it; a cancelled calibration still goes to `Inactive`. * `/wait_till_done` answers 500 with the message when a collection ended in an error. A cancelled collection and a collection that only triggered a warning still answer 200. * A pending start failure is discarded by `/cancel` and `/deactivate`, as it already was by `/start` and `/initialize`. * `/scan_result` no longer reports the previous run's images after a collection that failed to start, or after `/deactivate`. * The TCP image stream protocol version is 4. `jfjoch_writer` and `jfjoch_broker` have to be of the same release, as before. Reviewed-on: #75	2026-08-27 22:16:54 +02:00
leonarski_f	749db470ca	v1.0.0-rc.164 (#74) ... * rugnux now tells you whether a crystal diffracts anisotropically and how far it reaches in each direction, without a second program: a new `9. DIFFRACTION ANISOTROPY` section in `<prefix>_report.txt` and matching `_reflns.pdbx_aniso_B_tensor_*` / `_reflns.jfjoch_aniso_*` items in the merged mmCIF report the anisotropic deltaB, the diffraction limit along each principal direction, and a `NOT DETECTED` / `DETECTED` / `CANNOT DETERMINE` verdict measured against the data set's own systematic error. It is a description only - no intensity is corrected, no reflection is removed, and the merged data do not depend on direction. * rugnux can hand its integrated observations to another scaling program: `--export-unmerged` writes `<prefix>_unmerged.mtz`, an unmerged MTZ readable by aimless, pointless, careless and `iotbx.merging_statistics`, in `--mode mx` and `--mode scale` alike. Each rotation reflection's partials are summed into one full; `--export-unmerged-partials` writes one row per image instead. Intensities carry the Lorentz-polarization factor and nothing else, since those programs scale the data themselves. Lattice-centring absences are not written; screw and glide absences are. * rugnux integrates crystals with broad spots better - where it changes anything, per-shell mean I/sigma improves by up to 31% and R_meas by up to 24% - because on rotation data the integration signal radius is now taken from the crystal's own measured spot width instead of a fixed 4 px. `--adaptive-integration-radius=off` restores the fixed radius and an explicit `--integration-radius` still overrides both. The widened radius applies to the final integration pass only, and a pattern too dense for it is re-integrated at 4 px with a note in the log. * rugnux discards fewer stills reflections for want of a background ring, improving per-shell R_meas over most of the signal-bearing range: the stills background ring now runs to 14 px instead of 12. The gain reverses in shells below a mean I/sigma of about 4. * rugnux determines the space group with thresholds that mean the same thing on a weak crystal as on a strong one: symmetry operators are scored on resolution-normalised intensities (E squared) instead of raw merged intensities, and a reflection counts as genuinely present on its counting significance instead of on the merged I/sigma, which saturates at the merge's own ISa. The search resolution cut is no longer able to move the answer, and the twin-law H bound moves from 1.70 to 1.85, which stops one class of correct high-symmetry assignment being refused as twinning. * rugnux says what the space-group search tested and what it could not: the twin-law disagreement H is printed for every operator together with the adopted point group's H ratio and its bound; alternatives that are not on the reported lattice are named with how their cell differs; and a lattice centring the data could not test - the crystal having been integrated on the primitive sub-cell, so the reflections it extinguishes were never measured - is marked `UNTESTED` and warned about where it is adopted, as coming from the lattice metric rather than from the intensities. * rugnux `--mode scale` re-merges a `_process.h5` in the right symmetry without being told it: the file now records the space group on every run - a two-pass rotation run wrote none before, so re-merging defaulted to P1 - together with the change of basis under `/entry/MX/reindexMatrix` where the lattice was re-seated, and `--mode scale` also reports the Wilson B-factor estimate instead of `WILSON_B= nan`. A file written before this stops with a message naming the two cells and the override to use, instead of failing inside the merge. A third-party reader of a `_process.h5` must apply `reindexMatrix` where it is present. * rugnux installs on its own, as a package called `rugnux` - `dnf install rugnux` or `apt install rugnux` - instead of arriving inside `jfjoch-viewer`. It pulls in none of the acquisition stack, so a machine that only processes data no longer has to carry the broker, the detector libraries or Qt to get it. Installing it over a `jfjoch-viewer` from rc.163 or earlier, which still owns `/usr/bin/rugnux`, upgrades cleanly rather than failing on the duplicate file. * rugnux is also a standalone download, built for arm64 as well as x86_64: `rugnux-<version>-linux-{x86_64|aarch64}-cuda<major>.tgz` and `rugnux-<version>-win64-cuda<major>.zip` on the release page, for machines that are not managed by a package manager. The aarch64 build targets GH200 and DGX Spark, and is untested on hardware. * Every portable Linux binary is now a single self-contained file: cuFFT is linked statically instead of being shipped beside the executable and found through an rpath, so `rugnux` and `jfjoch_viewer` need nothing but an NVIDIA driver, and only to use the GPU. The `.rpm`/`.deb` continue to take cuFFT from the distribution. The developer utilities `jfjoch_extract_hkl` and `jfjoch_recompress` are no longer packaged anywhere. * Jungfraujoch needs six fewer shared libraries on the machine - libopenblas and libmetis, and libgfortran, libquadmath, libgomp and libz behind them - because the Ceres LAPACK, METIS and SuiteSparse back-ends are no longer built. Nothing in the code ever selected them, and results are unchanged. * The PCIe driver DKMS package builds for the kernel it is being installed for instead of the running one, so a module built while a kernel update is being applied loads after the reboot. * The PCIe driver builds on RHEL 9.5 and later, and on their CentOS Stream, Rocky and AlmaLinux equivalents, where the `vm_flags` kernel interface was backported into the 5.14 kernel. * A data collection started with `async_start` that fails to start - a writer refusing to overwrite an existing file, for instance - is reported as an error by `/wait_until_running` and `/wait_till_done` instead of as a timeout and a successful collection respectively. The error message is the one the writer gave. * A calibration that is cancelled or that fails to collect its pedestals is no longer reported as a successful one. The broker goes to `Inactive` with an error message and has to be initialized again, instead of sitting in `Idle` looking ready to measure while holding partial pedestals - data collected in that state was silently mis-converted. * A failed `/initialize` is reported to `/wait_until_running` and `/wait_till_done` as soon as it happens, instead of when their timeout expires. * `space_group_number` accepts space groups up to 230 in the API schema, so cubic space groups can be recorded. The broker always accepted them; the generated clients rejected them before the request was sent. * The results report's `REPORT_VERSION` is 3, two sections having been added. Existing key names and table columns are unchanged. * The merged statistics table has **9** resolution shells instead of 10, which is what XDS reports. The bins were already XDS's - equal steps in 1/d^2 between the lowest- and the highest-resolution reflection the merge kept - so at the same resolution limits the two tables now have the same shell boundaries and can be read row for row. `--resolution-shells` sets a different count. * `rugnux --model` now settles the frame the merged reflections are written in, not only the frame the R-factors and the maps are computed in: the `.mtz`/`.cif`/`.hkl` come out in the model's indexing, and where the data were merged in the model's enantiomorph they take the model's hand and space group - which on anomalous data puts I(+) and I(-) the right way round. The indexing choice is logged with the winning R-free and the runner-up, so a decision made within noise is visible. * `rugnux --model` can resolve the indexing ambiguity of a **serial stills** run, which a model could not do before: structure factors computed from the model become the per-image reference, the same role a reference MTZ plays. It needs the cell and space group up front (`-C` / `-S`). Without one or the other, a merohedral serial run still merges both hands together and says so. * The rugnux documentation opens with a quick start - the default run, and runs with a reference MTZ, with a model, or with the space group and cell pinned - and explains the indexing ambiguity: what it costs on rotation and on serial data, and which of `-z` / `--model` resolves it in each case. The long reference pages now carry a table of contents. Reviewed-on: #74 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-26 22:47:00 +02:00
leonarski_f	61c603b274	v1.0.0-rc.163 (#73) ... * Packaging: each package installs its license notices under a directory of its own - `share/doc/jfjoch_broker`, `share/doc/jfjoch_writer`, `share/doc/jfjoch_viewer`, `share/doc/jfjoch_driver_dkms` - instead of all of them into the shared `share/doc/jfjoch`, so `jfjoch` and `jfjoch-writer` can be upgraded one at a time instead of only together. Reviewed-on: #73 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-25 13:38:29 +02:00
leonarski_fandjungfrau	4dc2534dbf	v1.0.0.rc-162 (#72) ... **Files written by Jungfraujoch now import correctly in DIALS, XDS and pyFAI.** A tilted detector, a grid scan, a still recorded at a goniometer position, and saturated or unreadable pixels were each described in a way that a third-party program acted on wrongly. If you process Jungfraujoch data outside Jungfraujoch, prefer this release to any earlier one. * HDF5: the detector tilt (`rot1`/`rot2`/`rot3`) is exported correctly in the NXmx transformation chain; untilted geometries are unaffected. * HDF5: a still recorded at a goniometer position is no longer read back as a single image, and a grid scan records a stationary spindle so a program that requires a rotation axis can open it. * HDF5: the sample transformation chain is written in mounting order, with a Smargon head position told apart from the spindle, one entry per image, `module_offset` as a float unit vector, and `offset_units` on every offset. * HDF5: saturated, underloaded and unreadable pixels are described so a downstream program masks them - `saturation_value`, `underload_value`, `error_value` and `bit_depth_readout` are written correctly, and a data file missing next to a VDS master reads as the error marker rather than as zero counts. * HDF5: the rotation axis is read back under whatever name it carries, and `mirror_y` records whether the assembled image is mirrored in Y relative to the detector's raw readout. * A grid scan and a goniometer axis can both be set; they are no longer alternatives. * `images_per_file` is chosen from the acquisition when it is not given: a rotation sweep of at most 20000 images goes into a single data file, a grid scan splits on whole fast-axis rows, and stills and serial keep 1000. * The writer refuses a stream whose start message declares a different pixel format than its images carry, and a DECTRIS detector sending signed images is no longer declared unsigned. * The image stream can carry the sample transformation chain (`transformations`, in the END message); a producer that does not send it gets the same chain built by the writer. * rugnux: fixing the space group with `-S` no longer prevents the lattice from being found - a lattice indexed in a different setting is reindexed into that group's own setting, and a run whose crystal does not have that group's lattice stops and names the cell it indexed as, rather than reporting statistics that cannot describe it. * rugnux: the per-image resolution estimate now predicts the resolution the merged data reach rather than the highest-resolution spot found, and is reported as `SPOT_RESOLUTION_ESTIMATE`. * rugnux: two runs of the same command on the same images produce the same merged intensities; the azimuthal profile written alongside them is not yet reproducible in the same way. * rugnux: the offline lattice refinement is bounded by iterations rather than by a wall clock, so a loaded machine can no longer refine to a different lattice; a live acquisition keeps its real-time bound. * rugnux: the detector-frame modulation correction is fitted on a grid spanning the detector, so whether it is applied no longer depends on how far integration reached. * rugnux: the geometry pre-pass no longer writes `<prefix>_01.mtz`, `_01.cif`, `_01.hkl` and `_01_image.dat`; the refined second pass writes those files under `<prefix>`, and that is the result to use. * rugnux: `_process.h5` describes the pixel format of the images it links to, and is written on a thread of its own. * rugnux: the detector geometry is also logged in XDS's convention (`ORGX`/`ORGY`, detector axis vectors, rotation axis), so it can be compared with an XDS refinement. * rugnux: an image integrated in pyFAI through the `.poni` file written by `--mode calibration` comes out with the correct azimuth, and the file declares pyFAI's `orientation`, which needs pyFAI 2024.01 or newer. Radial integration is unchanged. * rugnux: a rotation run is substantially faster throughout - beam-stop detection, first-pass indexing, geometry refinement, integration, scaling and merging - and observations outside the scaling resolution range are dropped as they are ingested. The refined geometry, the space group chosen and the merged statistics are unchanged. * Faster spot finding and indexing, on the broker as well as in rugnux; the spots found and the lattices indexed are unchanged. * A run reserves substantially less GPU memory: nothing is allocated for buffers that are never read, and a worker builds only the engines it uses. * rugnux: with `-N` left at its default the per-image loop of `--mode mx` uses at most 16 workers per GPU, rather than one per hardware thread; an explicit `-N` is obeyed as given. * CUDA 12 builds now contain device code for Volta, so the RHEL 8 packages and the portable Linux `.tgz` run on a V100; the CUDA 13 artefacts (RHEL 9, Ubuntu, Windows) remain Turing and newer. * The build resolves a single Eigen for the whole project, and refuses to configure if Ceres picks up a different one; a build that mixed two Eigen versions was undefined behaviour and crashed at -O2. * Documentation: a security page, and the supported GPU generations and minimum NVIDIA driver version of every released artefact. **Breaking change to OpenAPI** - regenerate the client (`jfjoch-client` 1.0.0-rc.162, `frontend/src/client`): * `dataset_settings.images_per_file` is no longer `default: 1000` and no longer accepts `0`; it is optional, and its minimum is 1. A client sending `0` (previously "one file for the whole run") is now rejected - omit the field instead, which for a rotation sweep gives the same single file. * `file_writer_format` now defaults to `NXmxVDS`, matching the server's own default and the layout recommended for DIALS, XDS and CrystFEL. A generated client that fills in schema defaults and does not set the format explicitly will write VDS masters where it previously wrote legacy ones; set `NXmxLegacy` explicitly to keep them. --------- Co-authored-by: jungfrau <jungfrau@mx-aare-test.psi.ch> Reviewed-on: #72 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-25 08:21:39 +02:00
leonarski_f	538f3504d3	v1.0.0.rc-161 (#71) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * **rugnux: significantly better quality of results, and faster.** A large rework of integration, scaling, merging, geometry refinement and space-group determination, together with measurements the program previously made no attempt at - the direct beam before indexing, the beam stop, the goniometer rotation scale, and the stretches of a sweep the crystal did not deliver. A rotation dataset typically gains observations at better <I/sigma> and R_meas, and every `mx` and `scale` run writes a `<prefix>_report.txt` results report modelled on XDS's `CORRECT.LP`. Many defaults moved with it: spot detection is self-calibrating, beam-stop detection and rotation geometry post-refinement are on, resolution limits default to as far as the detector reaches, and ice-ring handling engages only where the crystal is measured to have ice. * **jfjoch_viewer:** the beam-stop shadow, the detector calibration and the beam-centre measurement are reachable from "Analyze dataset"; the settings panel reports how the sample moved and how polarized the beam was; image rendering and interaction are faster. * **Performance:** bitshuffle+LZ4 images are decoded on the GPU rather than on the host, with the bitshuffle inverse fused into preprocessing so the decompressed frame is never held in device memory. * **Broker, writer, packaging and build:** image-slot lifetime and locking fixes, per-image datasets sized by the images actually written, the Debian/Ubuntu broker package renamed to `jfjoch`, and `image_analysis` compiling under MSVC again. **Breaking change to the rugnux command line:** * `--azint-only` and `--scale` are **removed**, replaced by `--mode azint` and `--mode scale`; the full pipeline is `--mode mx` and remains the default. A script passing the old flags now fails with the list of valid modes rather than silently running the wrong one. * `-t`/`--stride` is **refused on rotation data**: skipping frames cuts every reflection's rocking curve, so the combined fulls and their partiality would be measured over frames the sweep never recorded. Select a contiguous range with `-s`/`-e` instead. `--mode azint` and `--force-still` still take a stride. **Breaking changes to OpenAPI** - regenerate the client (`jfjoch-client` 1.0.0-rc.161, `frontend/src/client`) or read the affected fields as optional: * `image_scale_b` is removed from the `plot_type` enum, so a client requesting that plot now gets an error rather than a curve. * `azim_int_settings.high_q_recipA`, `spot_finding_settings.high_resolution_limit` and `spot_finding_settings.low_resolution_limit` are no longer `required`. All three mean "no limit at that end" when unset and are omitted from the response instead of carrying a placeholder value, which raises in a client generated from an rc.160-or-earlier spec. A value of 0 is still accepted and means the same thing. **Breaking changes to the stored formats** - a consumer reading these fields must treat them as optional: * The per-image image-scale B factor is no longer computed, so `/entry/MX/imageScaleBFactor` is absent from newly written HDF5 files and the corresponding key is absent from the CBOR DataMessage and END blocks. Files written by rc.160 and earlier still contain it and still open; nothing in the pipeline reads it any more. * `_reflns.jfjoch_diffrn_ISa` now carries the whole-range `1/sqrt(a*b)` that XDS's ISa denotes, and the error-model `a` and `b` are reported in XDS's convention; the strong-reflection asymptote moves to `_reflns.jfjoch_diffrn_ISa_asymptotic`. **A file written by an earlier version carries the asymptote under the plain `ISa` name.** Reviewed-on: #71 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-13 17:03:10 +02:00
leonarski_f	67dca388bd	v1.0.0-rc.160 (#70) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Add `--model model.pdb` - score the merged data against an atomic model and compute initial maps. It reports R-work/R-free (scaling the model to the observed amplitudes with an overall scale, an anisotropic B and a flat bulk solvent - the standard few-parameter model, so a batch of maps stays directly comparable) and writes 2Fo-Fc / Fo-Fc electron-density maps (CCP4) plus a map-coefficient MTZ. The structure itself is not refined; the model is only re-fractionalised into the data cell. * rugnux: The merged reflection output now carries French-Wilson amplitudes (|F| and its sigma) next to the intensities - MTZ `F`/`SIGF`, mmCIF `_refln.F_meas_au`, and the text HKL - computed with the correct centric/acentric Wilson prior and epsilon multiplicity, so a downstream program (e.g. phenix.refine) can refine against amplitudes. The intensity columns are unchanged. * rugnux: R-free test-set flags are now assigned deterministically and consistently across symmetry - a Bijvoet pair I(+)/I(-) is never split between the work and free sets, and the assignment is a reproducible per-hkl hash that depends only on the reflection index, so every dataset of one crystal form gets the same ~5% free set (what a multi-dataset campaign such as PanDDA needs). On small data the fraction is floored so the test set stays large enough for a stable R-free (~500 reflections, capped at 10%); it stays flat at 5% on ordinary data. When a reference MTZ carries a `FreeR_flag` column its test set is imported instead, letting a whole campaign inherit one shared free set. * rugnux: A reference MTZ (`--reference-mtz`) can now fix the space group and cell for rotation data too (previously rejected), without being used to scale - the rotation merge stays self-consistent. When the crystal has an indexing (merohedral) ambiguity - a lattice symmetry higher than its Laue symmetry, e.g. P3/P4/P6/C2 - the reference also resolves it: each candidate reindexing (identity plus the twin-law cosets of the metric symmetry) is scored by its intensity correlation against the reference and the data are re-merged in the best-correlating one. This is a metric-preserving relabelling of hkl (the cell is unchanged) and a no-op for a holohedral crystal such as lysozyme. * rugnux: `--model` validation now aligns the data to the model before scoring - the observed reflections are reindexed into the model's enantiomorph when the two differ only by hand (indistinguishable from merged intensities). A merohedral indexing ambiguity is resolved against the reference MTZ when one is given (so a whole campaign shares one indexing convention); only with a model and no reference does validation fall back to fitting each candidate reindexing and keeping the lowest R-free. * rugnux: De-novo symmetry - recover a genuine high-symmetry group whose data are imperfectly scaled. Such a merge's within-orbit chi² lands just past the self-consistency bound (each real symmetry step adds a little systematic scatter), right where a merohedral twin also lands, so the chi² ratio alone cannot separate them. The candidate is now rescued when the extra intensity-proportional systematic error it invokes stays small relative to the confirmed subgroup - a genuine symmetry step gains multiplicity without inflating the merge error model's b, whereas a twin forces non-equivalent reflections together and b balloons. Fixes cubic insulin (I23 instead of I222) with no change to any other crystal in the test battery, including the twins that must stay in their lower symmetry. * Docs: Document the French-Wilson amplitude estimation, R-free flagging, reference-based space-group/ambiguity resolution, and model-based validation/maps in CPU_DATA_ANALYSIS.md. * Frontend: The status-bar pill now shows a progress bar during detector calibration (previously only during measurement), and the calibration state and its button are labelled "Calibration"/"CALIBRATE" (the internal `Pedestal` state name is unchanged for back-compatibility).Reviewed-on: #70 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-19 09:39:28 +02:00
leonarski_f	dd0bffb283	v1.0.0-rc.159 (#69) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Add `--model model.pdb` - score the merged data against an atomic model and compute initial maps. It reports R-work/R-free (scaling the model to the observed amplitudes with an overall scale, an anisotropic B and a flat bulk solvent - the standard few-parameter model, so a batch of maps stays directly comparable) and writes 2Fo-Fc / Fo-Fc electron-density maps (CCP4) plus a map-coefficient MTZ. The structure itself is not refined; the model is only re-fractionalised into the data cell. * rugnux: The merged reflection output now carries French-Wilson amplitudes (|F| and its sigma) next to the intensities - MTZ `F`/`SIGF`, mmCIF `_refln.F_meas_au`, and the text HKL - computed with the correct centric/acentric Wilson prior and epsilon multiplicity, so a downstream program (e.g. phenix.refine) can refine against amplitudes. The intensity columns are unchanged. * rugnux: R-free test-set flags are now assigned deterministically and consistently across symmetry - a Bijvoet pair I(+)/I(-) is never split between the work and free sets, and the assignment is a reproducible per-hkl hash that depends only on the reflection index, so every dataset of one crystal form gets the same ~5% free set (what a multi-dataset campaign such as PanDDA needs). On small data the fraction is floored so the test set stays large enough for a stable R-free (~500 reflections, capped at 10%); it stays flat at 5% on ordinary data. When a reference MTZ carries a `FreeR_flag` column its test set is imported instead, letting a whole campaign inherit one shared free set. * rugnux: A reference MTZ (`--reference-mtz`) can now fix the space group and cell for rotation data too (previously rejected), without being used to scale - the rotation merge stays self-consistent. When the crystal has an indexing (merohedral) ambiguity - a lattice symmetry higher than its Laue symmetry, e.g. P3/P4/P6/C2 - the reference also resolves it: each candidate reindexing (identity plus the twin-law cosets of the metric symmetry) is scored by its intensity correlation against the reference and the data are re-merged in the best-correlating one. This is a metric-preserving relabelling of hkl (the cell is unchanged) and a no-op for a holohedral crystal such as lysozyme. * rugnux: `--model` validation now aligns the data to the model before scoring - the observed reflections are reindexed into the model's enantiomorph when the two differ only by hand (indistinguishable from merged intensities). A merohedral indexing ambiguity is resolved against the reference MTZ when one is given (so a whole campaign shares one indexing convention); only with a model and no reference does validation fall back to fitting each candidate reindexing and keeping the lowest R-free. * rugnux: De-novo symmetry - recover a genuine high-symmetry group whose data are imperfectly scaled. Such a merge's within-orbit chi² lands just past the self-consistency bound (each real symmetry step adds a little systematic scatter), right where a merohedral twin also lands, so the chi² ratio alone cannot separate them. The candidate is now rescued when the extra intensity-proportional systematic error it invokes stays small relative to the confirmed subgroup - a genuine symmetry step gains multiplicity without inflating the merge error model's b, whereas a twin forces non-equivalent reflections together and b balloons. Fixes cubic insulin (I23 instead of I222) with no change to any other crystal in the test battery, including the twins that must stay in their lower symmetry. * Docs: Document the French-Wilson amplitude estimation, R-free flagging, reference-based space-group/ambiguity resolution, and model-based validation/maps in CPU_DATA_ANALYSIS.md. * Frontend: The status-bar pill now shows a progress bar during detector calibration (previously only during measurement), and the calibration state and its button are labelled "Calibration"/"CALIBRATE" (the internal `Pedestal` state name is unchanged for back-compatibility).Reviewed-on: #69 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-13 13:54:03 +02:00
leonarski_f	451310f43d	v1.0.0-rc.158 (#68) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * Analysis: The azimuthal-integration solid-angle correction now follows the incidence angle to the detector normal (`cos^3` of that angle) instead of `cos^3(2*theta)`, so it is correct for a tilted detector and matches PyFAI `solidAngleArray` and MAX IV azint (unchanged for an untilted detector). Crystal geometry refinement (`XtalOptimizer`) no longer silently ignores an imported PONI `rot3` (rotation about the beam): it is applied as a fixed rotation in the residual so refinement stays consistent with the rest of the pipeline. Polarization and azimuthal binning already honoured `rot3` through the full PONI rotation. * jfjoch_viewer: Open datasets on the WSL2/UNC filesystem (paths starting `\\`); write processing outputs next to the input file, with a Browse button and independent `_process.h5` / merged `.mtz`/`.cif` toggles; and show the determined space group in the merge-statistics window. * rugnux: Accept an absolute `-o` output prefix in offline processing. * Packaging: The self-contained Linux viewer `.tgz` now bundles cuFFT, so it runs without a system CUDA toolkit (`.deb`/`.rpm` are unchanged, distro-managed). * Docs: Bring the analysis references up to date with the code. `docs/CPU_DATA_ANALYSIS.md` now reflects the unified profile-fit Bragg integration engine, multi-lattice indexing, azimuthal phi binning, the radial parallax/bandwidth profile with sub-pixel centring, the rot3d capture-fraction handling and the automatic CC1/2 resolution cutoff, and drops the descriptions of features that were never implemented (French-Wilson amplitudes, the still excitation-error partiality model); `docs/RUGNUX.md` documents the new `--resolution-cutoff`/`--resolution-cc-target`/`--resolution-shells`, `--min-captured-fraction`, `--mosaicity`, `--reference-column`, the azimuthal correction toggles and the geometry-override options, and corrects the `-N` default. The outdated in-source design notes (ICE_RING_DETECTION, BRAGG_INTEGRATION_ENGINE, NEXTGEN_INTEGRATOR) are removed.Reviewed-on: #68 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-12 19:42:29 +02:00
leonarski_f	54c0100e8e	v1.0.0-rc.157 (#67) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Rebrand the offline data-processing subsystem as `rugnux` and consolidate all offline analysis into the single `rugnux` binary - `jfjoch_process` is now `rugnux`, the former `jfjoch_azint` is now `rugnux --azint-only`, and `jfjoch_scale` is now `rugnux --scale` (see the new docs/NAMING.md and docs/RUGNUX.md). Scaling and merging are on by default for rotation and stills (`--no-merge` disables them), replacing the previous opt-in `-M, --scale-merge`. * rugnux: CLI fixes - default `-N` to all hardware threads, parse numeric option arguments strictly (reject non-numeric or trailing input instead of silently yielding 0), require `--wavelength > 0`, and correct the reproduced command line and `--scale` reference-cell handling. * rugnux: De-novo space-group improvements - recover genuine high symmetry and centred Bravais lattices from intensities, add an automatic CC1/2 high-resolution cutoff, and report L-test twinning statistics. * rugnux: Index weakly-diffracting low-resolution rotation data that previously failed (e.g. F-cubic crystals that diffract only to ~4 A on a detector reaching ~1.5 A). The per-frame indexing gate now measures the indexed fraction only within the resolution range the lattice actually diffracts to, so the many sub-diffraction ice/noise spots no longer make the fraction floor unreachable; the two-pass first pass tries several image-sampling schemes (spread across the whole rotation vs a consecutive wedge whose native stride keeps a reflection's rocking curve continuous, letting the FFT resolve a long axis) and keeps the one that indexes the most frames; and the de-novo space-group search no longer discards all reflections (and crashes) when every resolution shell falls below <I/sigma> = 1. * rugnux: Lower the low-resolution R-meas for strongly-diffracting rotation data - drop edge-of-sweep truncated fulls whose rocking curve was captured below `--min-captured-fraction` (default 0.7 for rotation), and report R-meas only over the observations kept by outlier rejection (matching XDS). The 0.7 default also strips the partiality-extrapolated fulls that dominate the intensity second moment on weakly-diffracting crystals, so the de-novo space-group search is no longer starved by the error-model I/sigma floor and recovers the correct symmetry (e.g. the F-cubic Benas crystals: Benas_3 -> F432, Benas_7 -> P6122, instead of P4/P1); on the reference battery every other crystal keeps its space group. * rugnux: Write the refined geometry (beam, tilt, axis) to _process.h5 and place non-standard mmCIF items under a reserved `jfjoch` prefix. * jfjoch_broker: Ordinary acquisition failures (receiver/writer/analysis problems, missed packets, writer disconnect) now return to the Idle state with an Error-severity message, so a run can be retried without an expensive re-initialisation; only failures that leave the detector in an undefined state (new JFJochCriticalException, e.g. PCIe/FPGA faults) go to the Error state and force re-initialisation. * jfjoch_broker: A synchronous /start now reports its failure to the HTTP caller instead of returning HTTP 200, and an incomplete or truncated dataset (missing packets, writer disconnect) is reported as an error rather than a "reduce frame rate" warning. * jfjoch_broker: Drop uncollected placeholder rows (number = -1) from the scan_result REST endpoint. * jfjoch_broker: Fix the inverted per-image compression ratio reported by the Lite receiver (was compressed/uncompressed instead of uncompressed/compressed). * jfjoch_broker: Bragg integration adds a quantization-noise variance floor with a box-sum fallback, and treats the type-maximum marker as an invalid pixel for unsigned image types. * jfjoch_writer: Detect file-overwrite conflicts at start for back-channel transports, and reset the writer when end-of-collection finalisation fails. * jfjoch_viewer: Preview overlays follow the geometry (resolution/ROI arcs, true beam centre, predictions, coral secondary-lattice spots, legend), add save-as-JPEG, and fix an HTTP live-follow memory leak. * Frontend: Improved aesthetics and usability, and added in-browser pixel-mask and JUNGFRAU-pedestal visualisation. * CI: Name the Windows installer jfjoch-viewer-* instead of jfjoch-*.Reviewed-on: #67 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-11 07:19:11 +02:00
leonarski_f	d6389e12da	v1.0.0-rc.156 (#66) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Major rotation (rot3d) data processing overhaul - robust profile-fit integration, Cauchy-loss scaling with optional absorption surface, de-novo indexing and space-group/centering determination fixes, and merging statistics + ISa in the mmCIF output. * jfjoch_process: Add EXPERIMENTAL ice-ring detection (--detect-ice-rings) that excludes ice reflections from scaling. * Compression: Add BSHUF_ZSTD_RLE_HUFF, make compression size-aware (drop frames that don't fit rather than aborting), and add the jfjoch_recompress tool. * jfjoch_viewer: Report "Multiple lattices detected" and grey out "Analyze dataset" on a live connection. * jfjoch_broker: Write smargon chi/phi goniometer positions to NXmx; read sensor thickness/material from HDF5 metadata. * CI: Build Windows (CUDA and non-CUDA) installers.Reviewed-on: #66 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-03 19:18:56 +02:00
leonarski_f	54c667190f	v1.0.0-rc.155 (#65) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Remove pixelrefine option (replaced with ProfileIntegrate2D) * jfjoch_viewer: Some graphical improvements. * jfjoch_viewer: Simplify und unify data analysis settings. * jfjoch_writer: Add TCP keepalive to increase robustness if jfjoch_broker "dies" in the middle of data acquisition. Reviewed-on: #65	2026-06-25 22:01:48 +02:00
leonarski_f	6136f858af	v1.0.0-rc.154 (#64) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Fix to TCP file pusher (remove kernel zero copy to improve reliability) Reviewed-on: #64 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-06-25 18:12:00 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63	2026-06-23 20:29:49 +02:00
leonarski_f	c49bd2ac3b	v1.0.0-rc.152 (#62) ... * jfjoch_broker: Fix bounds for azimuthal integration for Q spacing (allow Q of 1e-5) * jfjoch_viewer: Adjust Q bounds for azimuthal integration * jfjoch_azint: Add tool to do quick azimuthal integration Reviewed-on: #62	2026-06-17 20:36:24 +02:00
leonarski_f	ef52dac2ee	v1.0.0-rc.151 (#61) ... * jfjoch_broker: For PSI EIGER detector allow to disable individual half-modules by putting empty hostname Reviewed-on: #61 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-06-16 14:13:29 +02:00
leonarski_f	90e804acd7	v1.0.0-rc.150 (#60) ... * jfjoch_broker: When in FPGA workflow (with PSI detectors) azimuthal integration might be forced to CPU - this will require more computational power, but it enables more integration bins and reports standard deviation of each bin. * jfjoch_broker: Raise error if one is in FPGA flow and there are too many azimuthal integration bins. Reviewed-on: #60	2026-06-15 20:24:15 +02:00
leonarski_f	ea575f790a	v1.0.0-rc.149 (#59) ... * XDS plugin: Fix HDF5 mutex to run on multiple processors Reviewed-on: #59	2026-06-13 21:27:41 +02:00
leonarski_f	cc3eb8352c	v1.0.0-rc.148 (#58) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_broker: Improve azimuthal integration (add <I^2> calculation) * jfjoch_broker: Fixes around indexing, aiming to handle multi-lattice crystals (work in progress, it is not fully integrated) * jfjoch_writer: Save mean(I), stddev(I), and count(I) for each azimuthal bin Reviewed-on: #58	2026-06-08 08:30:35 +02:00
leonarski_f	75de40f52b	v1.0.0-rc.147 (#57) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_viewer: Add reciprocal space viewer * jfjoch_process: Two pass algorithm that does spot finding/indexing + integration of full dataset * jfjoch_process: Improve logic for rotation indexer, to make execution more deterministic (still work in progress) Reviewed-on: #57 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-06-02 11:49:24 +02:00
leonarski_f	fc68a9baed	v1.0.0-rc.146 (#56) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. jfjoch_process: Generate a dedicated file (_process.h5), which can be used as a replacement for the _master.h5 file for a reanalyzed dataset. jfjoch_process: Improve the performance of scaling and merging, implement on the fly scaling. jfjoch_writer: All final data analysis results are repopulated in the _master.h5 file. jfjoch_scale: Dedicated tool for rescaling/merging existing data. jfjoch_viewer: Fix bugs where pixel labels where displayed on a wrong pixel. WARNING! Scaling and merging are experimental at the moment, and may not provide reasonable results for the time being. Reviewed-on: #56	2026-05-28 18:48:35 +02:00
leonarski_f	caef26873e	v1.0.0-rc.145 (#55) ... This is an UNSTABLE release. The release has significant modifications for HDF5 writing logic - in case of troubles go back to 1.0.0-rc.144. * **Default HDF5 writing mode is with VDS, not soft-links** - this improves DIALS compatibility and makes format more future-proof, NXmx legacy format might be phased-out in the future. * XDS plugin: Improve performance of VDS reading. * jfjoch_writer: Significant improvement on how file systems I/O are handled through a dedicated pass-through VFD. * jfjoch_writer: Clean-up of HDF5 routines to better handle issues. Reviewed-on: #55	2026-05-06 21:50:02 +02:00
leonarski_f	7d34e8a049	v1.0.0-rc.144 (#54) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Improve performance of preview JPEG image generator at receiver startup (saving about 150 ms on measurement start for 16M) Reviewed-on: #54 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-05-01 17:06:36 +02:00