v1.0.0-rc.165 (#75)

* `rugnux --model` adopts the model's space group as a label where the data were merged in its enantiomorph, instead of reindexing the reflections - which swapped I(+) with I(-).
* `rugnux --model` warns, naming the atom, when the anomalous density at the model's atoms comes out inverted, which means the data and the model are in opposite hands.
* `rugnux --model` writes an anomalous difference map (`<prefix>_anom.ccp4`) when the merge kept the Bijvoet split, and names the ten model atoms it peaks highest on as `ANOMALOUS_SITE_01`..`_10`.
* `MEAN_ATOM_DENSITY_SIGMA` is read from the map by cubic rather than linear interpolation and comes out around a tenth higher; it is no longer comparable with the figure earlier versions printed.
* `rugnux --model` reads an mmCIF coordinate file as well as a PDB one, gzipped or not, taking the format from the file's content rather than its name.
* A model `rugnux --model` cannot use is reported as a `WARNING:` line in the results report instead of only in the log.
* The rugnux results report has a `10. MODEL VALIDATION` section when `--model` was given; `REPORT_VERSION` is 4, `WARNINGS` moves to section 11 and no existing key changed.
* The rugnux results report records how the run was invoked, what it cost and what it ran on: `COMMAND_LINE=`, `WALL_TIME=` and `GPU_COUNT=` / `GPU=`.
* rugnux says which GPUs it can see before it starts processing.
* `rugnux --export-unmerged` also writes `<prefix>_unmerged.mtz` on a `--no-merge` run, and is ignored on a run with no output prefix instead of writing a file called `_unmerged.mtz`.
* `/start` asks the writer whether the run can be written before the detector is armed, so a run whose master file already exists, or whose output directory cannot be created, is refused up front with the writer's own message. This needs the TCP image stream or the built-in HDF5 writer; the ZeroMQ stream is unchanged.
* A calibration that fails goes to `Error` carrying the reason instead of `Inactive`, so `/wait_till_done` and `/wait_until_running` report it; a cancelled calibration still goes to `Inactive`.
* `/wait_till_done` answers 500 with the message when a collection ended in an error. A cancelled collection and a collection that only triggered a warning still answer 200.
* A pending start failure is discarded by `/cancel` and `/deactivate`, as it already was by `/start` and `/initialize`.
* `/scan_result` no longer reports the previous run's images after a collection that failed to start, or after `/deactivate`.
* The TCP image stream protocol version is 4. `jfjoch_writer` and `jfjoch_broker` have to be of the same release, as before.

Reviewed-on: #75

THIRD_PARTY_NOTICES.md

@@ -48,6 +48,12 @@ These are copied into the source tree (see the path) rather than fetched.
 | [LZ4](https://github.com/lz4/lz4) | `compression/lz4/` | Yann Collet | BSD-2-Clause | [lz4.txt](licenses/lz4.txt) |
 | [HLS arbitrary-precision types](https://github.com/Xilinx/HLS_arbitrary_Precision_Types) | `fpga/include/` | Xilinx, Inc. | Apache-2.0 | [xilinx-hls-headers.txt](licenses/xilinx-hls-headers.txt) |
 | [GEMMI](https://github.com/project-gemmi/gemmi) | `gemmi_gph/` | Global Phasing Ltd. | MPL-2.0 | [gemmi.txt](licenses/gemmi.txt) |
+| [PEGTL](https://github.com/taocpp/PEGTL) | `gemmi_gph/gemmi/third_party/tao/` | Dr. Colin Hirsch and Daniel Frey | MIT | [pegtl.txt](licenses/pegtl.txt) |
+| [sajson](https://github.com/chadaustin/sajson) | `gemmi_gph/gemmi/third_party/sajson.h` | Chad Austin | MIT | [sajson.txt](licenses/sajson.txt) |
+| [fast_float](https://github.com/fastfloat/fast_float) | `gemmi_gph/gemmi/third_party/fast_float.h` | The fast_float authors (Daniel Lemire et al.) | Apache-2.0 OR MIT OR BSL-1.0 | [fast-float.txt](licenses/fast-float.txt) |
+| [half](https://half.sourceforge.net/) | `gemmi_gph/gemmi/third_party/half.hpp` | Christian Rau | MIT | [half.txt](licenses/half.txt) |
+| [pocketfft](https://github.com/mreineck/pocketfft) | `gemmi_gph/gemmi/third_party/pocketfft_hdronly.h` | Max-Planck-Society; Peter Bell; MIT (FFTW-derived parts) | BSD-3-Clause | [pocketfft.txt](licenses/pocketfft.txt) |
+| [tinydir](https://github.com/cxong/tinydir) | `gemmi_gph/gemmi/third_party/tinydir.h` | Cong Xu, Lautis Sun, Baudouin Feildel, Andargor | BSD-2-Clause | [tinydir.txt](licenses/tinydir.txt) |
 | [traccc (ACTS)](https://github.com/acts-project/traccc) | `image_analysis/spot_finding/StrongPixelSet.cpp`, `SpotExtractorGPU.cu` | CERN, for the benefit of the ACTS project | MPL-2.0 | [traccc.txt](licenses/traccc.txt) |
 | [xbflash.qspi](https://github.com/Xilinx/XRT) | `tools/xbflash.qspi/` | Xilinx / AMD | Apache-2.0 | [xbflash-qspi.txt](licenses/xbflash-qspi.txt) |
 | [wingetopt](https://github.com/alex85k/wingetopt) | `tools/wingetopt/` | Todd C. Miller; The NetBSD Foundation | ISC AND BSD-2-Clause | [wingetopt.txt](licenses/wingetopt.txt) |
@@ -78,6 +84,12 @@ served frontend, so the shipped web UI carries its own attribution.
 * **MPL-2.0** (Eigen, GEMMI, libzmq, traccc): file-level copyleft. GEMMI is vendored in `gemmi_gph/`
   in trimmed form; libzmq is fetched at build time; Eigen is provided externally (header-only). The
   corresponding source is available from each project upstream.
+* **GEMMI's own bundled third-party headers** — PEGTL, sajson, fast_float, half, pocketfft and
+  tinydir, all under `gemmi_gph/gemmi/third_party/` — are listed separately above rather than being
+  absorbed into GEMMI's row: they are other authors' code under other licences (MIT, BSD and
+  Apache/MIT/BSL), and GEMMI's MPL-2.0 does not speak for them. Their terms are carried in the
+  headers themselves rather than in `LICENSE` files, so the `licenses/*.txt` copies are kept by hand;
+  only PEGTL ships a `LICENSE`, which `COLLECT.sh` copies.
 * **traccc** is the one entry that is not a vendored directory. Its sparse connected-component
   labelling enters two otherwise first-party files: `StrongPixelSet.cpp` adapts the SparseCCL source,
   and `SpotExtractorGPU.cu` follows the design of its GPU counterpart. MPL-2.0 is file-level, so both

VERSION

@@ -1 +1 @@
-1.0.0-rc.164
+1.0.0-rc.165

broker/JFJochBrokerHttp.cpp

@@ -74,6 +74,15 @@ namespace {
         return "application/octet-stream";
     }
 
+    std::string error_message_json(const std::string &msg, const std::string &reason) {
+        Error_message m;
+        m.setMsg(msg);
+        m.setReason(reason);
+        nlohmann::json j;
+        to_json(j, m);
+        return j.dump();
+    }
+
     inline bool read_file_to_string(const std::string &path, std::string &out) {
         std::ifstream f(path, std::ios::binary);
         if (!f)
@@ -120,19 +129,9 @@ std::pair<int, std::string> JFJochBrokerHttp::handleOperationException(const std
     try {
         throw;
     } catch (const WrongDAQStateException &) {
-        Error_message msg;
-        msg.setMsg(ex.what());
-        msg.setReason("WrongDAQState");
-        nlohmann::json j;
-        to_json(j, msg);
-        return {500, j.dump()};
+        return {500, error_message_json(ex.what(), "WrongDAQState")};
     } catch (const std::exception &) {
-        Error_message msg;
-        msg.setMsg(ex.what());
-        msg.setReason("Other");
-        nlohmann::json j;
-        to_json(j, msg);
-        return {500, j.dump()};
+        return {500, error_message_json(ex.what(), "Other")};
     }
 }
 
@@ -443,6 +442,18 @@ void JFJochBrokerHttp::wait_till_done_post(const std::optional<int32_t> &timeout
 
     switch (status.state) {
         case JFJochState::Idle:
+            // An operation that finished badly leaves the state Idle - the detector is still
+            // usable - and says so only through the message severity. Reporting that as a plain
+            // 200 makes a run that lost packets, or one whose writer could not write, look to a
+            // script exactly like a good one. A cancelled collection does not land here: the
+            // cancel is reported with Info severity, and MeasurementThread checks it before it
+            // looks at the completeness of the data, so the incomplete run a cancel leaves behind
+            // is never reported as an error. A Warning - a receiver that could not keep up - is
+            // still a 200: the data is there, and the run is done.
+            if (status.message_severity == BrokerStatus::MessageSeverity::Error) {
+                send_plain(response, 500, error_message_json(status.message.value_or("Unknown error"), "Other"));
+                return;
+            }
             response.status = 200;
             break;
         case JFJochState::Inactive:

broker/JFJochServices.cpp

@@ -8,6 +8,12 @@
 
 JFJochServices::JFJochServices(Logger &in_logger) : logger(in_logger) {}
 
+void JFJochServices::Preflight(const DiffractionExperiment& experiment) {
+    if (receiver == nullptr)
+        return;
+    receiver->Preflight(experiment);
+}
+
 void JFJochServices::Start(const DiffractionExperiment& experiment,
                            const PixelMask &pixel_mask,
                            const JFCalibration *calibration) {

broker/JFJochServices.h

@@ -28,6 +28,10 @@ public:
     void On(DiffractionExperiment& experiment);
     void Off();
     void ConfigureDetector(const DiffractionExperiment& experiment);
+    // Refuse a run the writer could not write, while refusing it is still free: this runs before
+    // the receiver is created and before the detector is armed, so a rejected run leaves nothing
+    // to tear down. Does nothing for transports without a back-channel (ZeroMQ).
+    void Preflight(const DiffractionExperiment& experiment);
     void Start(const DiffractionExperiment& experiment,
                const PixelMask &pixel_mask,
                const JFCalibration *calibration = nullptr);

broker/JFJochStateMachine.cpp

@@ -120,7 +120,11 @@ void JFJochStateMachine::CalibrateDetector(std::unique_lock<std::mutex> ul) {
     } catch (const std::exception &e) {
         logger.Error("Calibration sequence error {}", e.what());
         // The calibration is in an undefined state, so the detector has to be initialized again.
-        SetState(JFJochState::Inactive, e.what(), BrokerStatus::MessageSeverity::Error);
+        // Error rather than Inactive: /wait_till_done and /wait_until_running answer Error with a 500
+        // carrying this message, while Inactive is a bodiless 502 that loses the reason - and Inactive
+        // is also what a deliberate Deactivate() leaves behind, so a failure would be indistinguishable
+        // from a detector someone powered down. Initialize() clears Error, so recovery is unchanged.
+        SetState(JFJochState::Error, e.what(), BrokerStatus::MessageSeverity::Error);
         c.notify_all(); // ul unlocks on the way out
         throw;
     }
@@ -162,7 +166,7 @@ bool JFJochStateMachine::TakeDarkMaskInternal(std::unique_lock<std::mutex> &ul)
     ul.lock();
 
     if (mask_output.receiver_output.dark_mask_result.size() != local_experiment.GetPixelsNum()) {
-        SetState(JFJochState::Inactive, "Mask not collected properly", BrokerStatus::MessageSeverity::Error);
+        SetState(JFJochState::Error, "Mask not collected properly", BrokerStatus::MessageSeverity::Error);
         return false;
     }
     pixel_mask.LoadDarkBadPixelMask(local_experiment, mask_output.receiver_output.dark_mask_result);
@@ -209,7 +213,7 @@ bool JFJochStateMachine::TakePedestalInternalG0(std::unique_lock<std::mutex> &ul
     ul.lock();
 
     if (!ImportPedestalG0(pedestal_output.receiver_output)) {
-        SetState(JFJochState::Inactive,
+        SetState(JFJochState::Error,
                  "Pedestal not collected properly",
                  BrokerStatus::MessageSeverity::Error);
         return false;
@@ -254,7 +258,7 @@ bool JFJochStateMachine::TakePedestalInternalG1(std::unique_lock<std::mutex> &ul
     ul.lock();
 
     if (!ImportPedestalG1G2(pedestal_output.receiver_output, 1, storage_cell)) {
-        SetState(JFJochState::Inactive,
+        SetState(JFJochState::Error,
                  "Pedestal not collected properly",
                  BrokerStatus::MessageSeverity::Error);
         return false;
@@ -297,7 +301,7 @@ bool JFJochStateMachine::TakePedestalInternalG2(std::unique_lock<std::mutex> &ul
     ul.lock();
 
     if (!ImportPedestalG1G2(pedestal_output.receiver_output, 2, storage_cell)) {
-        SetState(JFJochState::Inactive,
+        SetState(JFJochState::Error,
                  "Pedestal not collected properly",
                  BrokerStatus::MessageSeverity::Error);
         return false;
@@ -387,6 +391,12 @@ void JFJochStateMachine::Start(const DatasetSettings &settings, bool async) {
     // previous run's failure behind for the next wait call to report.
     start_exception = nullptr;
 
+    // The same for the previous run's scan result. It is only ever replaced at the END of a
+    // successful measurement, so a run that fails to start - or is rejected here - would otherwise
+    // leave /scan_result answering with the last run's images, under this run's number and with
+    // nothing to say they are not its own. Initialize() already clears it for the same reason.
+    scan_result = {};
+
     experiment.ImportDatasetSettings(settings);
 
     cancel_sequence = false;
@@ -434,6 +444,11 @@ PixelMaskStatistics JFJochStateMachine::GetPixelMaskStatistics() const {
 
 void JFJochStateMachine::MeasurementThread() {
     try {
+        // Before anything is started: ask the writer whether it could write this run. A run that
+        // would be refused for a file already there, or a directory that cannot be made, is
+        // refused now - with no receiver built and, above all, no detector armed, so there is
+        // nothing to tear down and no series left waiting for a trigger that will not come.
+        services.Preflight(experiment);
         services.SetSpotFindingSettings(GetSpotFindingSettings());
         services.Start(experiment, pixel_mask, calibration.get());
         {
@@ -527,6 +542,9 @@ void JFJochStateMachine::MeasurementThread() {
 void JFJochStateMachine::Cancel() {
     // This is inconsistency in naming - need to solve later
     std::unique_lock ul(m);
+    // Cancelling supersedes a pending start failure: the caller has taken the run in hand, and the
+    // next wait must report what the cancel did, not what the start before it failed to do.
+    start_exception = nullptr;
     if ((state == JFJochState::Calibration) || (state == JFJochState::Measuring)) {
         services.Cancel();
         cancel_sequence = true;
@@ -549,6 +567,16 @@ void JFJochStateMachine::Deactivate() {
     if (IsRunning())
         throw WrongDAQStateException("Cannot deactivate while the detector is busy");
 
+    // Powering down supersedes a pending start failure. Without this it outlives the detector it
+    // belongs to: every later wait call keeps rethrowing a failure from a run on hardware that is no
+    // longer even on, until the next Initialize() or Start() happens to clear it.
+    start_exception = nullptr;
+
+    // The same for the last run's scan result, and for the same reason: it describes a measurement on
+    // a detector that is being turned off, and Initialize() - the only way back from here - clears it
+    // anyway. Leaving it would let /scan_result answer for a session that has ended.
+    scan_result = {};
+
     // Reap the finished thread, but do not let a failure it stored stop the power-off: the state is
     // Error precisely because that run failed, and leaving the detector powered is worse than
     // losing an error message that was already reported when it happened.

broker/gen/model/Azim_int_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Azim_int_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Bragg_integration_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Bragg_integration_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Broker_status.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Broker_status.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Calibration_statistics_inner.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Calibration_statistics_inner.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dark_mask_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dark_mask_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dataset_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dataset_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dataset_settings_smargon.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dataset_settings_smargon.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dataset_settings_xray_fluorescence_spectrum.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Dataset_settings_xray_fluorescence_spectrum.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_list.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_list.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_list_element.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_list_element.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_module.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_module.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_module_direction.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_module_direction.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_power_state.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_power_state.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_selection.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_selection.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_state.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_state.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_status.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_status.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_timing.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_timing.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_type.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Detector_type.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Error_message.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Error_message.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_format.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_format.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/File_writer_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Fpga_status_inner.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Fpga_status_inner.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Geom_refinement_algorithm.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Geom_refinement_algorithm.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Grid_scan.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Grid_scan.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Helpers.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Helpers.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_buffer_status.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_buffer_status.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_format_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_format_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_pusher_status.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_pusher_status.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_pusher_type.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Image_pusher_type.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Indexing_algorithm.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Indexing_algorithm.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Indexing_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Indexing_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Instrument_metadata.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Instrument_metadata.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Integration_model.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Integration_model.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Jfjoch_settings.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Jfjoch_settings.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Jfjoch_statistics.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Jfjoch_statistics.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Measurement_statistics.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Measurement_statistics.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pcie_devices_inner.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pcie_devices_inner.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pixel_mask_statistics.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Pixel_mask_statistics.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot_unit_x.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plot_unit_x.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plots.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Plots.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azim_list.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azim_list.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azimuthal.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_azimuthal.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_box.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_box.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_box_list.cpp

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).

broker/gen/model/Roi_box_list.h

@@ -2,7 +2,7 @@
 * Jungfraujoch
 * API to control Jungfraujoch developed by the Paul Scherrer Institute (Switzerland). Jungfraujoch is a data acquisition and analysis system for pixel array detectors, primarly PSI JUNGFRAU. Jungfraujoch uses FPGA boards to acquire data at high data rates.  # License Clarification  While this API definition is licensed under GPL-3.0, **the GPL copyleft provisions do not apply** when this file is used solely to generate OpenAPI clients or when implementing applications that interact with the API. Generated client code and applications using this API definition are not subject to the GPL license requirements and may be distributed under terms of your choosing.  This exception is similar in spirit to the Linux Kernel's approach to userspace API headers and the GCC Runtime Library Exception. The Linux Kernel developers have explicitly stated that user programs that merely use the kernel interfaces (syscalls, ioctl definitions, etc.) are not derivative works of the kernel and are not subject to the terms of the GPL.  This exception is intended to allow wider use of this API specification without imposing GPL requirements on applications that merely interact with the API, regardless of whether they communicate through network calls or other mechanisms. 
 *
-* The version of the OpenAPI document: 1.0.0-rc.164
+* The version of the OpenAPI document: 1.0.0-rc.165
 * Contact: filip.leonarski@psi.ch
 *
 * NOTE: This class is auto generated by OpenAPI Generator (https://openapi-generator.tech).