- Arrayutil was not summing correctly
- Added interest to motorsec in order to support old status clients
- core dump because of bad free in devser
- fixed transferring of count time in multicounter
- added stack debugging to sllinux_def
- Modifications to tasdrive to wait for finish of monochromator properly
a server hangs up diretcly after a message.
- Some output was suppressed while tracing, fixed
- Make ready to compile both with Ubuntu 32 and 64 or /usr/local
based ON in general. Just in psi/makefile_linux the top include has
to be adapted
- Removed epics drivers from SICS. Still in source to be reenabled when
needed
- Added FindMotor
- Added sput, sappend and slab to nxscript using the new sicsget module
- Fix to sget to fix the "mot softzero" problem
SKIPPED:
psi/make_gen
psi/psi.c
psi/sinqhttpopt.c
psi/spss7.c
- Added error fields to hwardware objects: motor, counter, histmem
- Optimised sinqhttpopt
- Added haddcheck which adds checks to hipadaba nodes. The current implementation
only checks for selctions agaisnt the values property. Expand when more checks are
required.
SKIPPED:
psi/polterwrite.c
psi/sinqhttpopt.c
psi/tasinit.c
- Fixed some issues with error returns not being properly handled in devexec
- Fixed a bug in motorlist which caused limit checks to fail
- Fixed an issue with the TDCHM not properly updating the counter
values on finish
- Readded getHipadabaPar in ChainCallback as this caused a problem in ei
- Made tasdrive ignore sgu, sgl when out of plane not allowed
SKIPPED:
psi/eigermono.c
psi/sinqhttp.c
psi/tdchm.c
- Extended tasker to support task groups
- Added task functions for motors and counters
- Modifed devexec to use the new task functions
- Modified TAS to treat the monochromator separatly
- Coded a EIGER monochromator module to reflect even more new
requirements
- Added EPICS counters and motors
- Modified multicounter to be better performing
SKIPPED:
psi/eigermono.c
psi/make_gen
psi/makefile_linux
psi/psi.c
psi/sinqhttp.c
- Removed generation of incommenurate reflections for 0,0,0 in fourmess.c
- Implemented a Poch command for heartbeats
- Fixed 64 bit dimension issues in nxdict
- Fixed different calling conventions for NXReportError deep stack in nxdict
- Stopped ei motor driving when not necessary
- Added yet another monitor for POLDI
- Added a protocoll driver for the JVL motor RS-485 binary protocoll
- Fixed some reporting issues
SKIPPED:
psi/jvlprot.c
psi/make_gen
psi/polterwrite.c
psi/psi.c
psi/spss7.c
- Added a warning for excessive data rates on monitors
- Added statistics to devser and thus to scriptcontext
- Added byte concatenation to dynstring
- Added aborting for reflection generation to fourmess.c
- Added data checksum testing to hipadaba, use for update tests
- Fixed interrupt discovery in network.c, caused invalid interrupt
codes which in turn confused sicscron which had to be fixed too.
- Renamed ubcalc into ubcalcint in order to reclaim the ubcalc for Jurg
- Added an a3offset to tasub in order to fix what I perceive an IS problem
- Added support for the newer version of the Siemens SPS, the S7
- Added a not yet fully working sinqhttpopt driver which talks to
http HM without libghttp
SKIPPED:
psi/delcam.c
psi/make_gen
psi/psi.c
psi/sinq.c
psi/sinq.h
psi/sinqhttpopt.c
psi/slsvme.c
psi/spss7.c
syntax checking input purposes
- Rectified an error message in fourmess.c
- HMcontrol did not check for the HM to stop before returning. This
caused weird data files at AMOR as the data had not yet been downloaded
from the HM.
- Fixed an issue about parameters in multicounter
- Temporary fix in nxscript.c to always read the Hm from the HM and not
a buffer. This is prior to rethinking caching strategies for old style
HM's.
- Synchronize now copies fixed motors correctly. This used to cause
irritation with users. This now requires a script syncdrive to exist
in the sync server which takes care of handling the fixed flag when
this is desired.
- Added initify to sicsdata in order to copy large value timebins over
properly at AMOR
SKIPPED:
psi/amorstat.c
psi/make_gen
psi/makefile_linux
psi/polterwrite.c
psi/sinq.c
psi/sinqhttp.c
psi/sinqhttpprot.c
psi/sps.c
psi/tdchm.c
- Implemented the desired run/drive behaviour: drive waits for what it started
run starts, and success waits for everything to finish. This required
changes to a lot of files.
- Fixed a bug in remob which supressed required messages
- Fixes to make RITA work
- tasub extended to calculate UB from cell alone, support for elastic mode
- New MultiCounter as abstraction for counting on HM's
- regression test driver for counters
reached: it handles one test case correctly back and forth
- Fixed oscillation code
- Added a feature for switching off automatic updates in nxupdate
Autoamtic updates cause problems when scanning...
- Introduced a help system
- introduced a module for handling automatic updates of files during
long measurements
- Added a circular buffer and handling facilities to varlog
- Upgraded documentation
SKIPPED:
psi/faverage.h
psi/nxamor.tex
psi/pimotor.h
psi/pimotor.tex
tiny change in the countable interface which in turn required updating
of header file includes in a lot of files.
- Some small fixes to TRICS writing as well.
required inclusion of a matrix package.
- modified counter error handling to send a Stop when the _BAD_BUSY
error is received.
- added an environment interface to the general controller stuff in choco.*
Also added setting a parameter directly at the controller object.
- Added a driver for the ETH High Temperature Furnace to be used at
SANS.
