158 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5	61a7c91b90	Ice: detect it on two channels, and only handle it when it is there ... The per-image ice score was read off the PLAIN azimuthal profile. That profile is a per-ring mean, so a few strong Bragg reflections landing in a ring's q bin lift it exactly as ice would. Measured over 37 rotation crystals, that did not merely add noise - it INVERTED the metric: the two highest-scoring crystals had no ice at all (4.23 and 4.06), while a clean control read 1.57. A decoy null - the identical statistic evaluated at q positions where hexagonal ice cannot be - reaches 1.51 at its 99th percentile and 2.70 at its maximum, so that metric cannot support any absolute threshold whatsoever. The adaptive spot finder already computes the right input for its own threshold: a sigma-clipped per-resolution-ring background, in the same bins. A powder ring is azimuthally smooth and survives the clip; Bragg peaks do not. On the clipped profile the clean population tightens to 1.00-1.22 and the crystals with confirmed ice sit at 2.08-2.37, against a decoy null that never exceeds 1.29. That channel is blind to one thing: ice in large crystallites diffracts as DISCRETE spots and leaves the radial profile flat. So a second channel counts found spots on the rings against the same q width of ice-free flanks beside them. The two barely overlap - the smooth-ice crystals read 2.1-2.4 / ~1.0 and the textured ones ~1.1 / 3.8-17.6, while a clean crystal reads 1.04 on both. Both are then used as a GATE (--ice-min-score 1.5, --ice-min-spot-ratio 2.0, both calibrated on the battery, 0 disables): the eleven fixed hexagonal bands cover 16-26 % of the unique reflections at typical resolutions whether or not the crystal has ice, so flagging, the exclusion from the scale fit and the merge-time CC1/2 ring mask are now all skipped when neither channel sees any. The gate is applied in the full pipeline and in --scale, which reads the stored per-image values back out of the _process.h5. Also fixes the merge-time mask's control: the shoulder now excludes reflections that are themselves on an ice ring. The rings are not evenly spaced - 1.947/1.916/1.882 A sit 0.05-0.06 apart in q - so for those three the [w,3w) shoulder landed squarely on the neighbours and the test compared ice against ice. Measured, that is the only thing this changes: it removes firings on those three rings and leaves every other firing's CC pair identical to three decimals. And the online ice half-width, which was 0.02 in the API against 0.03 offline, so the same data got a narrower band online than the measured ~0.06 ring FWHM justifies. Battery (37 rotation crystals, against the previous behaviour): space groups 34/37 in both and NO crystal's space group changes; 6 crystals gain unique reflections, 1 loses. Best of them gains 7082 unique reflections with R_meas 16.0 -> 14.3, CC1/2 95.9 -> 97.3 and ISa 13.7 -> 19.0; another goes R_meas 54.9 -> 42.9, CC1/2 84.0 -> 90.4, ISa 3.9 -> 5.5; a third reaches CC1/2 99.4 from 95.7 at an unchanged reflection count. The one crystal that loses reflections improves on both R_meas and CC1/2. Not done here: the ScanResult/API/plot-type/frontend/viewer layers for the new spot_count_ice_control (they need the OpenAPI regeneration). Message, CBOR, HDF5 write/read and the receiver plots are. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-06 16:17:23 +02:00
leonarski_fandClaude Opus 5	90ab67f376	broker: expose adaptive spot finding over the API ... The self-calibrating detection threshold was reachable from rugnux and the viewer but not online: spot_finding_settings carried no adaptive_threshold, so the receiver always ran the fixed-threshold finder and the fused GPU engine sat unused behind it. adaptive_threshold and false_pixels_per_frame are now part of the schema, both optional so an existing client that sends neither is unaffected, wired through OpenAPIConvert in both directions and surfaced in the frontend panel, where turning the mode on greys out the count threshold it replaces and reveals the operating point it uses instead. The C++ server model and the TypeScript client are regenerated from the spec; the Python client is generated but not tracked. Enabling it is REFUSED where spots are found on the FPGA - the JUNGFRAU and EIGER workflows - rather than accepted and ignored, because a detection setting that silently had no effect cannot be told apart from one that did. The DECTRIS/SIMPLON workflow, which analyses images in software, accepts it. Verified against a running broker: adaptive_threshold true is rejected with that message and leaves the stored settings untouched, while false and omitted both succeed. It stays off by default online, unlike rugnux and the viewer. The broker serves both workflows and the default has to be the one that works on either. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-02 20:01:34 +02:00
leonarski_fandClaude Opus 5	f8beee7e87	frontend: surface spot-finding upload failures and send sliders on release ... This was the only panel firing the generated call directly, with the rejection routed to console.log. Because the poll then kept returning the unchanged server value - which still equalled lastDownloadedS - the resync effect never fired, so the dashboard showed a threshold the broker was not using, indefinitely and silently. It now goes through useUpload like its siblings, so a failure raises the snackbar, and onError puts the server's value back in the panel. The eight sliders also applied from onChange, which MUI fires for every intermediate position while dragging: one drag across the ice-ring width sent ~200 PUTs plus ~200 forced /statistics refetches, each reconfiguring spot finding on the running acquisition. Dragging now only moves the panel; the value is sent from onChangeCommitted. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 14:50:39 +02:00
leonarski_fandClaude Opus 5	b0e315e73c	Bragg prediction: derive the lattice walk from the cell, and expose it in the API ... Follow-up to making max_hkl a setting: it is now an optional, and unset means "take it from this crystal". The predictor keeps only |q| <= 1/d_min and h = a.q for the real-space axis a, so |h| <= a/d_min exactly - and likewise |k| <= b/d_min and |l| <= c/d_min. max(a,b,c)/d_min therefore bounds all three at once: nothing that could be predicted lies outside it, and nothing inside it is reached by a shorter axis. It applies to rotation and stills alike, both going through the one place the prediction settings are built. Offline (rugnux, viewer) the default is unset, so every crystal gets its own range; --max-hkl overrides it. Online the broker holds a concrete number, because the cost is the cube of it per image and a live acquisition should not have its frame rate decided by whichever sample is mounted: max_hkl joins bragg_integration_settings in the OpenAPI with a default of 100, so an omitted field arrives as that default (the generated model carries it) rather than as "derive it", and the frontend exposes it next to the integration model. Measured against a fixed 100 on six rotation crystals: three are bit-identical, two were being truncated and recover 419k and 5.8k observations with the high-shell CC1/2 going 15.1 -> 25.8% and 52.1 -> 55.3%, and the space group is unchanged 6/6. It reproduces a fixed 200 exactly, which is the bound being tight rather than merely safe. The sixth is worth recording: a 149/83/226 A cell derives 227, and because a single scalar has to cover the longest axis the cube is ~16x what a per-axis box would be - 22% wall clock, for a net 22 observations out of 364k (the per-frame 65536-reflection cap re-selects at the margin when more candidates are offered) and identical CC1/2, ISa and space group. Per-axis limits would remove that; the predictors already map a thread index to h, k and l separately. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 13:10:58 +02:00
leonarski_f	43e9de9573	VERSION: 1.0.0-rc.161	2026-07-28 21:58:00 +02:00
leonarski_fandClaude Opus 5	16bf3408f0	Address code-review findings; make detection limits detector-driven ... One changeset, developed together in response to a review of this branch, so the files carry several of the changes at once. Full test suite passes (733 cases). Spot finding - Split ImageSpotFinder into Detect() (flag strong pixels - the expensive per-pixel pass) and ExtractSpots() (CCL + min/max-pix + resolution mask), with Run() = both. The per-image min-pix escalation now detects ONCE and repeats only the cheap extraction, instead of re-running the whole finder four times per frame as it did on the default path. It also keeps the winning attempt's spot list rather than re-extracting it, so the frame that is integrated is exactly the frame that was scored - which a GPU re-extract could not guarantee (float atomic ordering). - spot_finding_time_s no longer swallows indexing time, and indexing_time_s now sums every escalation call instead of reporting only the last. Detection limits follow the detector - The azimuthal-integration upper q and the spot-finding high-resolution limit are now std::optional, in the C++ structs AND in the OpenAPI schema, and resolve to the detector's own maximum (DiffractionExperiment::GetDetectorMaxQ_ recipA). Adaptive detection reads a pixel's ring from the azimuthal bins, so a pixel outside that q range could never be strong - the integration range silently bounded what detection could see, regardless of the requested resolution limit. Regenerated the C++ and TypeScript clients; the viewer and the web frontend each gained a "to detector edge" switch. Detection defaults are now per workflow (measured, not assumed) - Stills: adaptive detection, min-pix chosen per image, no resolution clipping. - Rotation: fixed-threshold finder, min-pix 2, 1.5 A limit. On a 33-crystal rotation battery, adaptive detection helped four hard crystals but deterministically broke three (a lost space group, a halved indexing rate, a collapsed merge), and the detector-edge limit cost indexing on a strong rotation set (100.0 -> 96.8%). Each is still overridable by its flag, and --no-adaptive-spots is new. Indexer seed escalation - Stop escalating once a seed's lattice explains >= 90% of the seed spots. Previously any frame with >= 80 spots always paid three indexer calls, online broker included. Merge-consistency filter - --min-image-cc gated on a per-image CC computed BEFORE the stills partiality post-refinement and never refreshed; the refiner now recomputes it, so the reported CC describes the data that are actually merged. - Replaced the per-call cc_mask argument with one MergeOnTheFly flag, so the merge, the error model and MergeStats can no longer disagree about which images are in (the --scale path merged unfiltered while its statistics were filtered). Per-image B-factor refinement (-B) removed - Measured on four serial-stills datasets: it is a no-op where the per-image fit is well conditioned and actively harmful where it is not (CC1/2 -8.1, R_meas +23.2 on the weakest large-cell set, whose fits hit their [-50, 200] bounds on 14-25% of images). It had also been silently DISCARDED since the partiality post-refinement landed - reported but not applied. Rather than fix and keep a knob with no demonstrated benefit, the flag and the whole image_scale_b_factor chain are gone: setting, scaling fit, message field, CBOR, HDF5 write and read-back, per-image plot, OpenAPI enum, viewer column and checkbox, docs. ScaleOnTheFly no longer needs Ceres at all - the fit is a linear IRLS. (The Wilson per-image b_factor is a different quantity and stays.) Stills partiality width now fits both of its components - sigma^2 = gamma0^2 + (gamma_e*d*)^2 instead of a purely angular gamma_e*d* with gamma0 pinned to 0. Fitted per crystal by least squares of dist_ewald^2 on d*^2. The angular-only width is fitted over a d*^2-dense population, so it was pinned by the high-resolution edge and collapsed at low d*: median partiality 0.008 beyond 13 A for reflections that were plainly recorded, 55% of them under the merge's partiality floor, and the survivors divided by those values - which inflated the merged low-resolution intensity scale 3.6x (~ +9 A^2 of apparent B). Measured on 5000 stills: the ramp flattens to 0.89x, no observation is dropped any more (701750 -> 716811), shell-mean CC1/2 and R-free improve slightly. Note CC1/2, R_meas, completeness and a B-refining R-free are all blind to that ramp, which is why it survived earlier validation; the cost is high-resolution R_meas (98.5 -> 101.9 shell-averaged). Removed dead code from add-then-remove churn - Prediction-time "still partiality" (unreachable: no setter), the phantom IndexingSettings::min_indexed_spot_fraction knob (getter, no setter - now the constant it always was), StillsPartialityRefine's caller-less Settings constructor and its reference to a long-gone env var, ProcessImage's unread bool return, an unused include, and a dead viewer overlay hook. Also - Viewer: the magnifier compared a QImage with itself, so its scene rect was set once ever and it could not pan into a larger dataset; the hover tail timer could fire after leaveEvent and resurrect the resolution readout outside the image. - update_version.sh regenerated the frontend lock file BEFORE bumping the version (every release shipped an off-by-one lock), and did git rm/git add on a path that has not existed since the client moved to src/client - with no set -e, both failed silently. - fpga/pcie_driver/postinstall.sh tested "[ ! occurrences > 0 ]", which is a redirect, not a test, so dkms add never ran. - Unit tests for the adaptive-threshold host functions, which had none. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 09:07:00 +02:00
leonarski_f	67dca388bd	v1.0.0-rc.160 (#70) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Add `--model model.pdb` - score the merged data against an atomic model and compute initial maps. It reports R-work/R-free (scaling the model to the observed amplitudes with an overall scale, an anisotropic B and a flat bulk solvent - the standard few-parameter model, so a batch of maps stays directly comparable) and writes 2Fo-Fc / Fo-Fc electron-density maps (CCP4) plus a map-coefficient MTZ. The structure itself is not refined; the model is only re-fractionalised into the data cell. * rugnux: The merged reflection output now carries French-Wilson amplitudes (|F| and its sigma) next to the intensities - MTZ `F`/`SIGF`, mmCIF `_refln.F_meas_au`, and the text HKL - computed with the correct centric/acentric Wilson prior and epsilon multiplicity, so a downstream program (e.g. phenix.refine) can refine against amplitudes. The intensity columns are unchanged. * rugnux: R-free test-set flags are now assigned deterministically and consistently across symmetry - a Bijvoet pair I(+)/I(-) is never split between the work and free sets, and the assignment is a reproducible per-hkl hash that depends only on the reflection index, so every dataset of one crystal form gets the same ~5% free set (what a multi-dataset campaign such as PanDDA needs). On small data the fraction is floored so the test set stays large enough for a stable R-free (~500 reflections, capped at 10%); it stays flat at 5% on ordinary data. When a reference MTZ carries a `FreeR_flag` column its test set is imported instead, letting a whole campaign inherit one shared free set. * rugnux: A reference MTZ (`--reference-mtz`) can now fix the space group and cell for rotation data too (previously rejected), without being used to scale - the rotation merge stays self-consistent. When the crystal has an indexing (merohedral) ambiguity - a lattice symmetry higher than its Laue symmetry, e.g. P3/P4/P6/C2 - the reference also resolves it: each candidate reindexing (identity plus the twin-law cosets of the metric symmetry) is scored by its intensity correlation against the reference and the data are re-merged in the best-correlating one. This is a metric-preserving relabelling of hkl (the cell is unchanged) and a no-op for a holohedral crystal such as lysozyme. * rugnux: `--model` validation now aligns the data to the model before scoring - the observed reflections are reindexed into the model's enantiomorph when the two differ only by hand (indistinguishable from merged intensities). A merohedral indexing ambiguity is resolved against the reference MTZ when one is given (so a whole campaign shares one indexing convention); only with a model and no reference does validation fall back to fitting each candidate reindexing and keeping the lowest R-free. * rugnux: De-novo symmetry - recover a genuine high-symmetry group whose data are imperfectly scaled. Such a merge's within-orbit chi² lands just past the self-consistency bound (each real symmetry step adds a little systematic scatter), right where a merohedral twin also lands, so the chi² ratio alone cannot separate them. The candidate is now rescued when the extra intensity-proportional systematic error it invokes stays small relative to the confirmed subgroup - a genuine symmetry step gains multiplicity without inflating the merge error model's b, whereas a twin forces non-equivalent reflections together and b balloons. Fixes cubic insulin (I23 instead of I222) with no change to any other crystal in the test battery, including the twins that must stay in their lower symmetry. * Docs: Document the French-Wilson amplitude estimation, R-free flagging, reference-based space-group/ambiguity resolution, and model-based validation/maps in CPU_DATA_ANALYSIS.md. * Frontend: The status-bar pill now shows a progress bar during detector calibration (previously only during measurement), and the calibration state and its button are labelled "Calibration"/"CALIBRATE" (the internal `Pedestal` state name is unchanged for back-compatibility).Reviewed-on: #70 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-19 09:39:28 +02:00
leonarski_f	dd0bffb283	v1.0.0-rc.159 (#69) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Add `--model model.pdb` - score the merged data against an atomic model and compute initial maps. It reports R-work/R-free (scaling the model to the observed amplitudes with an overall scale, an anisotropic B and a flat bulk solvent - the standard few-parameter model, so a batch of maps stays directly comparable) and writes 2Fo-Fc / Fo-Fc electron-density maps (CCP4) plus a map-coefficient MTZ. The structure itself is not refined; the model is only re-fractionalised into the data cell. * rugnux: The merged reflection output now carries French-Wilson amplitudes (|F| and its sigma) next to the intensities - MTZ `F`/`SIGF`, mmCIF `_refln.F_meas_au`, and the text HKL - computed with the correct centric/acentric Wilson prior and epsilon multiplicity, so a downstream program (e.g. phenix.refine) can refine against amplitudes. The intensity columns are unchanged. * rugnux: R-free test-set flags are now assigned deterministically and consistently across symmetry - a Bijvoet pair I(+)/I(-) is never split between the work and free sets, and the assignment is a reproducible per-hkl hash that depends only on the reflection index, so every dataset of one crystal form gets the same ~5% free set (what a multi-dataset campaign such as PanDDA needs). On small data the fraction is floored so the test set stays large enough for a stable R-free (~500 reflections, capped at 10%); it stays flat at 5% on ordinary data. When a reference MTZ carries a `FreeR_flag` column its test set is imported instead, letting a whole campaign inherit one shared free set. * rugnux: A reference MTZ (`--reference-mtz`) can now fix the space group and cell for rotation data too (previously rejected), without being used to scale - the rotation merge stays self-consistent. When the crystal has an indexing (merohedral) ambiguity - a lattice symmetry higher than its Laue symmetry, e.g. P3/P4/P6/C2 - the reference also resolves it: each candidate reindexing (identity plus the twin-law cosets of the metric symmetry) is scored by its intensity correlation against the reference and the data are re-merged in the best-correlating one. This is a metric-preserving relabelling of hkl (the cell is unchanged) and a no-op for a holohedral crystal such as lysozyme. * rugnux: `--model` validation now aligns the data to the model before scoring - the observed reflections are reindexed into the model's enantiomorph when the two differ only by hand (indistinguishable from merged intensities). A merohedral indexing ambiguity is resolved against the reference MTZ when one is given (so a whole campaign shares one indexing convention); only with a model and no reference does validation fall back to fitting each candidate reindexing and keeping the lowest R-free. * rugnux: De-novo symmetry - recover a genuine high-symmetry group whose data are imperfectly scaled. Such a merge's within-orbit chi² lands just past the self-consistency bound (each real symmetry step adds a little systematic scatter), right where a merohedral twin also lands, so the chi² ratio alone cannot separate them. The candidate is now rescued when the extra intensity-proportional systematic error it invokes stays small relative to the confirmed subgroup - a genuine symmetry step gains multiplicity without inflating the merge error model's b, whereas a twin forces non-equivalent reflections together and b balloons. Fixes cubic insulin (I23 instead of I222) with no change to any other crystal in the test battery, including the twins that must stay in their lower symmetry. * Docs: Document the French-Wilson amplitude estimation, R-free flagging, reference-based space-group/ambiguity resolution, and model-based validation/maps in CPU_DATA_ANALYSIS.md. * Frontend: The status-bar pill now shows a progress bar during detector calibration (previously only during measurement), and the calibration state and its button are labelled "Calibration"/"CALIBRATE" (the internal `Pedestal` state name is unchanged for back-compatibility).Reviewed-on: #69 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-13 13:54:03 +02:00
leonarski_f	451310f43d	v1.0.0-rc.158 (#68) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * Analysis: The azimuthal-integration solid-angle correction now follows the incidence angle to the detector normal (`cos^3` of that angle) instead of `cos^3(2*theta)`, so it is correct for a tilted detector and matches PyFAI `solidAngleArray` and MAX IV azint (unchanged for an untilted detector). Crystal geometry refinement (`XtalOptimizer`) no longer silently ignores an imported PONI `rot3` (rotation about the beam): it is applied as a fixed rotation in the residual so refinement stays consistent with the rest of the pipeline. Polarization and azimuthal binning already honoured `rot3` through the full PONI rotation. * jfjoch_viewer: Open datasets on the WSL2/UNC filesystem (paths starting `\\`); write processing outputs next to the input file, with a Browse button and independent `_process.h5` / merged `.mtz`/`.cif` toggles; and show the determined space group in the merge-statistics window. * rugnux: Accept an absolute `-o` output prefix in offline processing. * Packaging: The self-contained Linux viewer `.tgz` now bundles cuFFT, so it runs without a system CUDA toolkit (`.deb`/`.rpm` are unchanged, distro-managed). * Docs: Bring the analysis references up to date with the code. `docs/CPU_DATA_ANALYSIS.md` now reflects the unified profile-fit Bragg integration engine, multi-lattice indexing, azimuthal phi binning, the radial parallax/bandwidth profile with sub-pixel centring, the rot3d capture-fraction handling and the automatic CC1/2 resolution cutoff, and drops the descriptions of features that were never implemented (French-Wilson amplitudes, the still excitation-error partiality model); `docs/RUGNUX.md` documents the new `--resolution-cutoff`/`--resolution-cc-target`/`--resolution-shells`, `--min-captured-fraction`, `--mosaicity`, `--reference-column`, the azimuthal correction toggles and the geometry-override options, and corrects the `-N` default. The outdated in-source design notes (ICE_RING_DETECTION, BRAGG_INTEGRATION_ENGINE, NEXTGEN_INTEGRATOR) are removed.Reviewed-on: #68 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-12 19:42:29 +02:00
leonarski_f	54c0100e8e	v1.0.0-rc.157 (#67) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Rebrand the offline data-processing subsystem as `rugnux` and consolidate all offline analysis into the single `rugnux` binary - `jfjoch_process` is now `rugnux`, the former `jfjoch_azint` is now `rugnux --azint-only`, and `jfjoch_scale` is now `rugnux --scale` (see the new docs/NAMING.md and docs/RUGNUX.md). Scaling and merging are on by default for rotation and stills (`--no-merge` disables them), replacing the previous opt-in `-M, --scale-merge`. * rugnux: CLI fixes - default `-N` to all hardware threads, parse numeric option arguments strictly (reject non-numeric or trailing input instead of silently yielding 0), require `--wavelength > 0`, and correct the reproduced command line and `--scale` reference-cell handling. * rugnux: De-novo space-group improvements - recover genuine high symmetry and centred Bravais lattices from intensities, add an automatic CC1/2 high-resolution cutoff, and report L-test twinning statistics. * rugnux: Index weakly-diffracting low-resolution rotation data that previously failed (e.g. F-cubic crystals that diffract only to ~4 A on a detector reaching ~1.5 A). The per-frame indexing gate now measures the indexed fraction only within the resolution range the lattice actually diffracts to, so the many sub-diffraction ice/noise spots no longer make the fraction floor unreachable; the two-pass first pass tries several image-sampling schemes (spread across the whole rotation vs a consecutive wedge whose native stride keeps a reflection's rocking curve continuous, letting the FFT resolve a long axis) and keeps the one that indexes the most frames; and the de-novo space-group search no longer discards all reflections (and crashes) when every resolution shell falls below <I/sigma> = 1. * rugnux: Lower the low-resolution R-meas for strongly-diffracting rotation data - drop edge-of-sweep truncated fulls whose rocking curve was captured below `--min-captured-fraction` (default 0.7 for rotation), and report R-meas only over the observations kept by outlier rejection (matching XDS). The 0.7 default also strips the partiality-extrapolated fulls that dominate the intensity second moment on weakly-diffracting crystals, so the de-novo space-group search is no longer starved by the error-model I/sigma floor and recovers the correct symmetry (e.g. the F-cubic Benas crystals: Benas_3 -> F432, Benas_7 -> P6122, instead of P4/P1); on the reference battery every other crystal keeps its space group. * rugnux: Write the refined geometry (beam, tilt, axis) to _process.h5 and place non-standard mmCIF items under a reserved `jfjoch` prefix. * jfjoch_broker: Ordinary acquisition failures (receiver/writer/analysis problems, missed packets, writer disconnect) now return to the Idle state with an Error-severity message, so a run can be retried without an expensive re-initialisation; only failures that leave the detector in an undefined state (new JFJochCriticalException, e.g. PCIe/FPGA faults) go to the Error state and force re-initialisation. * jfjoch_broker: A synchronous /start now reports its failure to the HTTP caller instead of returning HTTP 200, and an incomplete or truncated dataset (missing packets, writer disconnect) is reported as an error rather than a "reduce frame rate" warning. * jfjoch_broker: Drop uncollected placeholder rows (number = -1) from the scan_result REST endpoint. * jfjoch_broker: Fix the inverted per-image compression ratio reported by the Lite receiver (was compressed/uncompressed instead of uncompressed/compressed). * jfjoch_broker: Bragg integration adds a quantization-noise variance floor with a box-sum fallback, and treats the type-maximum marker as an invalid pixel for unsigned image types. * jfjoch_writer: Detect file-overwrite conflicts at start for back-channel transports, and reset the writer when end-of-collection finalisation fails. * jfjoch_viewer: Preview overlays follow the geometry (resolution/ROI arcs, true beam centre, predictions, coral secondary-lattice spots, legend), add save-as-JPEG, and fix an HTTP live-follow memory leak. * Frontend: Improved aesthetics and usability, and added in-browser pixel-mask and JUNGFRAU-pedestal visualisation. * CI: Name the Windows installer jfjoch-viewer-* instead of jfjoch-*.Reviewed-on: #67 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-11 07:19:11 +02:00
leonarski_f	d6389e12da	v1.0.0-rc.156 (#66) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Major rotation (rot3d) data processing overhaul - robust profile-fit integration, Cauchy-loss scaling with optional absorption surface, de-novo indexing and space-group/centering determination fixes, and merging statistics + ISa in the mmCIF output. * jfjoch_process: Add EXPERIMENTAL ice-ring detection (--detect-ice-rings) that excludes ice reflections from scaling. * Compression: Add BSHUF_ZSTD_RLE_HUFF, make compression size-aware (drop frames that don't fit rather than aborting), and add the jfjoch_recompress tool. * jfjoch_viewer: Report "Multiple lattices detected" and grey out "Analyze dataset" on a live connection. * jfjoch_broker: Write smargon chi/phi goniometer positions to NXmx; read sensor thickness/material from HDF5 metadata. * CI: Build Windows (CUDA and non-CUDA) installers.Reviewed-on: #66 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-03 19:18:56 +02:00
leonarski_f	54c667190f	v1.0.0-rc.155 (#65) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Remove pixelrefine option (replaced with ProfileIntegrate2D) * jfjoch_viewer: Some graphical improvements. * jfjoch_viewer: Simplify und unify data analysis settings. * jfjoch_writer: Add TCP keepalive to increase robustness if jfjoch_broker "dies" in the middle of data acquisition. Reviewed-on: #65	2026-06-25 22:01:48 +02:00
leonarski_f	6136f858af	v1.0.0-rc.154 (#64) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Fix to TCP file pusher (remove kernel zero copy to improve reliability) Reviewed-on: #64 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-06-25 18:12:00 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63	2026-06-23 20:29:49 +02:00
leonarski_f	c49bd2ac3b	v1.0.0-rc.152 (#62) ... * jfjoch_broker: Fix bounds for azimuthal integration for Q spacing (allow Q of 1e-5) * jfjoch_viewer: Adjust Q bounds for azimuthal integration * jfjoch_azint: Add tool to do quick azimuthal integration Reviewed-on: #62	2026-06-17 20:36:24 +02:00
leonarski_f	ef52dac2ee	v1.0.0-rc.151 (#61) ... * jfjoch_broker: For PSI EIGER detector allow to disable individual half-modules by putting empty hostname Reviewed-on: #61 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-06-16 14:13:29 +02:00
leonarski_f	90e804acd7	v1.0.0-rc.150 (#60) ... * jfjoch_broker: When in FPGA workflow (with PSI detectors) azimuthal integration might be forced to CPU - this will require more computational power, but it enables more integration bins and reports standard deviation of each bin. * jfjoch_broker: Raise error if one is in FPGA flow and there are too many azimuthal integration bins. Reviewed-on: #60	2026-06-15 20:24:15 +02:00
leonarski_f	ea575f790a	v1.0.0-rc.149 (#59) ... * XDS plugin: Fix HDF5 mutex to run on multiple processors Reviewed-on: #59	2026-06-13 21:27:41 +02:00
leonarski_f	cc3eb8352c	v1.0.0-rc.148 (#58) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_broker: Improve azimuthal integration (add <I^2> calculation) * jfjoch_broker: Fixes around indexing, aiming to handle multi-lattice crystals (work in progress, it is not fully integrated) * jfjoch_writer: Save mean(I), stddev(I), and count(I) for each azimuthal bin Reviewed-on: #58	2026-06-08 08:30:35 +02:00
leonarski_f	75de40f52b	v1.0.0-rc.147 (#57) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_viewer: Add reciprocal space viewer * jfjoch_process: Two pass algorithm that does spot finding/indexing + integration of full dataset * jfjoch_process: Improve logic for rotation indexer, to make execution more deterministic (still work in progress) Reviewed-on: #57 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-06-02 11:49:24 +02:00
leonarski_f	fc68a9baed	v1.0.0-rc.146 (#56) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. jfjoch_process: Generate a dedicated file (_process.h5), which can be used as a replacement for the _master.h5 file for a reanalyzed dataset. jfjoch_process: Improve the performance of scaling and merging, implement on the fly scaling. jfjoch_writer: All final data analysis results are repopulated in the _master.h5 file. jfjoch_scale: Dedicated tool for rescaling/merging existing data. jfjoch_viewer: Fix bugs where pixel labels where displayed on a wrong pixel. WARNING! Scaling and merging are experimental at the moment, and may not provide reasonable results for the time being. Reviewed-on: #56	2026-05-28 18:48:35 +02:00
leonarski_f	caef26873e	v1.0.0-rc.145 (#55) ... This is an UNSTABLE release. The release has significant modifications for HDF5 writing logic - in case of troubles go back to 1.0.0-rc.144. * **Default HDF5 writing mode is with VDS, not soft-links** - this improves DIALS compatibility and makes format more future-proof, NXmx legacy format might be phased-out in the future. * XDS plugin: Improve performance of VDS reading. * jfjoch_writer: Significant improvement on how file systems I/O are handled through a dedicated pass-through VFD. * jfjoch_writer: Clean-up of HDF5 routines to better handle issues. Reviewed-on: #55	2026-05-06 21:50:02 +02:00
leonarski_f	7d34e8a049	v1.0.0-rc.144 (#54) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Improve performance of preview JPEG image generator at receiver startup (saving about 150 ms on measurement start for 16M) Reviewed-on: #54 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-05-01 17:06:36 +02:00
leonarski_f	6e0bb971ac	v1.0.0-rc.143 (#53) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. jfjoch_broker: Avoid copying gain calibration together with DiffractionExperiment Reviewed-on: #53	2026-04-30 22:16:50 +02:00
leonarski_f	87fde1b32e	v1.0.0-rc.142 (#52) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * Support for newer CUDA architectures (notably Blackwell); minimum CUDA version 12.8 * Minor changes to jfjoch_process, jfjoch_fpga_test and jfjoch_lite_perf_test to make them more consistent Reviewed-on: #52 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-30 16:47:53 +02:00
leonarski_f	d760b12a18	v1.0.0-rc.141 (#51) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Azimuthal integration mapping is generated with parallel computations, significantly reducing setup times * frontend: Fix selection of FFTW in indexing settings Reviewed-on: #51 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-30 13:04:54 +02:00
leonarski_f	239a441ee6	v1.0.0-rc.140 (#50) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: For DECTRIS detectors, ZeroMQ link is persistent, to save time for establishing new connection * jfjoch_broker: Minor bug fixes for rare conditions Reviewed-on: #50	2026-04-29 21:40:22 +02:00
leonarski_f	4878318c27	v1.0.0-rc.139 (#49) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Further reduce startup time for DECTRIS detectors by selectively modifying SIMPLON parameters on `/start` * jfjoch_broker: Further reduce startup time for DECTRIS detectors by not setting beam center and detector distance via SIMPLON API on '/start' * jfjoch_broker: Add an extra message to ZeroMQ puller ready to monitor Lite worklow preparation time * jfjoch_broker: Image buffer configuration is postponed for Lite receiver flow till start message is received * jfjoch_broker: Use nanoseconds internally for frame/image/readout time * jfjoch_broker: Extra messages added for receiver operation (to be removed after debugging finished) * jfojch_broker: Improve profiling of different data analysis steps * jfjoch_broker: Record integration reflection count * jfjoch_broker: Fix bug where ZeroMQ preview frequency was confusing time units (micro vs. milliseconds) * jfjoch_broker: Fix bug where '/wait_till_done' got deadlocked * jfjoch_writer: Fix confusion between NaN and zero in floating-point datasets **Breaking changes**: detector definition is now using nanoseconds to define minimum frame time, minimum count time and readout time. Reviewed-on: #49	2026-04-29 09:50:50 +02:00
leonarski_fandtakaba_k	230480e390	v1.0.0-rc.138 (#48) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. jfjoch_broker: Cleanup DECTRIS start-up code to enable a shorter start time jfjoch_broker: Allow for asynchronous start to allow overlapping detector configuration with other beamline preparations jfjoch_broker: Goniometer axis name is converted to lowercase jfjoch_broker: Fix bug, where wrong HTTP error codes were returned jfjoch_broker: Improve sigma estimation during merging (K. Takaba) --------- Co-authored-by: takaba_k <kiyofumi.takaba@psi.ch> Reviewed-on: #48 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-27 19:56:14 +02:00
leonarski_f	c981e1b91c	v1.0.0-rc.137 (#46) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Better track time for each operation in the processing stack * jfjoch_broker: Rewrite preprocessing of diffraction images in the non-FPGA workflow to better use GPUs (work in progress) * jfjoch_broker: Remove ROI calculation in the non-FPGA workflow (work in progress) * jfjoch_viewer: Toolbar displays image number starting from 1 (instead of 0) Reviewed-on: #46	2026-04-25 19:59:21 +02:00
leonarski_f	c1c170112c	v1.0.0-rc.136 (#45) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Improve logic regarding indexing architecture and thread pools (work in progress). Reviewed-on: #45	2026-04-20 11:54:33 +02:00
leonarski_f	bb9f5c715f	v1.0.0-rc.135 (#44) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * Multiple small bug fixes scattered across the whole code base. (detected with GPT-5.4) * jfjoch_viewer: Improve image render performance Reviewed-on: #44 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-16 11:59:59 +02:00
leonarski_f	4a852b4d6b	v1.0.0-rc.134 (#43) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Add better locking for detector object - should help, when detector initialization takes too long * jfjoch_writer: Enable writing single, integrated HDF5 file with both data and metadata * XDS plugin: Add generation of Jungfraujoch plugin for XDS * CI: Add tests with XDS and DIALS (`xia2.ssx`) Reviewed-on: #43	2026-04-09 13:30:47 +02:00
leonarski_f	6133da1377	v1.0.0-rc.133 ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Use httplib for HTTP server instead of Pistache * jfjoch_broker: Drop OpenSSL support * jfjoch_broker: Base work for multi-lattice support in the future * Update dependencies to more recent versions (spdlog, HDF5, Catch2, httplib) Reviewed-on: #41	2026-03-26 20:50:33 +01:00
leonarski_f	2ab9deb20b	v1.0.0-rc.123 (#40) ... Documentation update Reviewed-on: #40	2026-03-12 12:17:11 +01:00
leonarski_f	166fcdb68f	v1.0.0-rc.131 (#39) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Fix bug in saving JUNGFRAU calibration (pedestal/pedestalRMS) * jfjoch_viewer: Fix calibration (pedestal) images being open flipped * jfjoch_process: Add space group detection (EXPERIMENTAL) Reviewed-on: #39	2026-03-07 11:34:04 +01:00
leonarski_f	928789a67c	v1.0.0-rc.130 (#37) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Rotation indexer has two retries if failes * jfjoch_broker: Rotation indexer handles small number of rotation images (like test shot) * jfjoch_broker: Integration calculates background mask based on R2 radius * jfjoch_process: HDF5 files are not saved by default Reviewed-on: #37	2026-03-06 14:38:56 +01:00
leonarski_f	64002f1e29	v1.0.0-rc.129 (#36) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Significant improvements in TCP image socket, as a viable alternative for ZeroMQ sockets (only a single port on broker side, dynamically change number of writers, acknowledgments for written files) * jfjoch_broker: Delta phi is calculated also for still data in Bragg prediction * jfjoch_broker: Image pusher statistics are accessible via the REST interface * jfjoch_writer: Supports TCP image socket and for these auto-forking option Reviewed-on: #36 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-03-05 22:13:12 +01:00
leonarski_f	3036b1d37f	v1.0.0-rc.128 (#35) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Handle properly reuse of image buffer locations * jfjoch_broker: Fix bug in counting idle slots * jfjoch_broker: Force obtuse angle for monoclinic cells * jfjoch_process: Change scaling refinement tolerance Reviewed-on: #35 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-03-03 22:24:44 +01:00
leonarski_f	f3e0a15d26	v1.0.0-rc.127 (#34) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Default EIGER readout time is 20 microseconds * jfjoch_broker: Multiple improvements regarding performance * jfjoch_broker: Image buffer allows to track frames in preparation and sending * jfjoch_broker: Dedicated thread for ZeroMQ transmission to better utilize the image buffer * jfjoch_broker: Experimental implementation of transmission with raw TCP/IP sockets * jfjoch_writer: Fixes regarding properly closing files in long data collections * jfjoch_process: Scale & merge has been significantly improved, but it is not yet integrated into mainstream code Reviewed-on: #34	2026-03-02 15:57:12 +01:00
leonarski_f	32b681e591	v1.0.0-rc.126 (#33) ... This is an UNSTABLE release. If things go wrong with analysis, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Fix bug for monoclinic space groups being wrongly refined when beta is much different from 90 deg. Reviewed-on: #33 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-02-19 07:01:38 +01:00
leonarski_f	1ab257af6c	v1.0.0-rc.125 (#32) ... This is an UNSTABLE release. This version adds scalign and merging. These are experimental at the moment, and should not be used for production analysis. If things go wrong with analysis, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Improve logic on switching on/off spot finding * jfjoch_broker: Increase maximum spot count for FFBIDX to 65536 * jfjoch_broker: Increase default maximum unit cell for FFT to 500 A (could have performance impact, TBD) * jfjoch_process: Add scalign and merging functionality - program is experimental at the moment and should not be used for production analysis * jfjoch_viewer: Display partiality and reciprocal Lorentz-polarization correction for each reflection * jfjoch_writer: Save more information about each reflection Reviewed-on: #32 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-02-18 16:17:21 +01:00
leonarski_f	07fe4dd3bb	v1.0.0-rc.124 (#31) ... This is an UNSTABLE release. This version significantly rewrites code to predict reflection position and integrate them, especially in case of rotation crystallography. If things go wrong with analysis, it is better to revert to 1.0.0-rc.123. * jfjoch_broker: Improve refection position prediction and Bragg integration code. * jfjoch_broker: Align with XDS way of calculating Lorentz correction and general notation. * jfjoch_writer: Fix saving mosaicity properly in HDF5 file. * jfjoch_viewer: Introduce high-dynamic range mode for images * jfjoch_viewer: Ctrl+mouse wheel has exponential change in foreground (+/-15%) * jfjoch_viewer: Zoom-in numbers have better readability Reviewed-on: #31 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-02-01 13:29:33 +01:00
leonarski_f	1c4dfd03e2	v1.0.0-rc.123 (#30) ... This is an UNSTABLE release. * jfjoch_broker: Use newer version of Google Ceres for (potential) CUDA 13 compatibility * jfjoch_broker: Improve performance of generating preview images, especially for large detectors (9M-16M) * jfjoch_viewer: Improve performance of displaying images, especially for large detectors (9M-16M) * jfjoch_viewer: Add more color schemes for better image readability * HDF5: Common mutex for reading and writing HDF5 if both operations were to happen in the same executable * HDF5: suppress warning if path (upstream group) doesn't exists when checking if leaf exists Reviewed-on: #30 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-01-30 13:43:09 +01:00
leonarski_f	27496b8207	v1.0.0-rc.122 (#29) ... This is an UNSTABLE release. * jfjoch_broker: Add thresholding to prefer shorter vectors after FFT * jfjoch_broker: Add experimental mosaicity estimation for rotation experiments (this is work in progress) * jfjoch_viewer: Display file opening errors * jfjoch_viewer: When loading files over DBus add retry/back-off till the file is available Reviewed-on: #29 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-12-16 15:27:40 +01:00
leonarski_f	e2b240356c	v1.0.0-rc.121 (#28) ... This is an UNSTABLE release. * jfjoch_broker: Report changes in the image buffer, so viewer doesn't reload constantly * jfjoch_viewer: Improve performance of loading images * jfjoch_viewer: Auto-throttle image loading in HTTP-sync / movie modes * jfjoch_viewer: Auto-foreground calculated with histogram * jfjoch_viewer: Fix rare segmentation fault Reviewed-on: #28 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-12-12 21:24:20 +01:00
leonarski_f	a0a659a02c	v1.0.0-rc.120 (#27) ... This is an UNSTABLE release. * jfjoch_broker: Improve performance of binary plot export Reviewed-on: #27 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-12-09 15:21:40 +01:00
leonarski_f	36d0507758	v1.0.0-rc.119 (#26) ... This is an UNSTABLE release and not recommended for production use (please use rc.111 instead). * jfjoch_broker: Add binary export of data analysis plots over OpenAPI * jfjoch_broker: Minor fixes to HTTP error handling * jfjoch_viewer: Prefer binary plots over JSON plots * jfjoch_viewer: Change foreground with F button + wheel * jfjoch_viewer: Change way how angles are displayed * jfjoch_viewer: Display resolution of the mouse cursor in top left corner Reviewed-on: #26 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-12-08 19:53:35 +01:00
leonarski_f	b02c412d59	v1.0.0-rc.118 (#25) ... This is an UNSTABLE release and not recommended for production use (please use rc.111 instead). * jfjoch_viewer: Fix issue when HTTP sync silently disconnected when it was enabled when the broker was starting measurement. * jfjoch_broker: Add protections on time of geometry optimization and reduce rotation recalculations Reviewed-on: #25 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-12-06 20:05:30 +01:00
leonarski_f	d1a4c19ef3	v1.0.0-rc.117 (#24) ... This is an UNSTABLE release and not recommended for production use (please use rc.111 instead). * jfjoch_viewer: Add ROI results to the dataset info plots * jfjoch_writer: Remove HTTP interface, as it is not needed/used at the moment Reviewed-on: #24 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-12-05 22:03:07 +01:00