Update version numbers

Also contains some reformatting in README.md

.ci/appveyor-prepare.bat

@@ -1,70 +0,0 @@
-:: Build script for AppVeyor (https://ci.appveyor.com/)
-:: Environment:
-::     TOOLCHAIN      -  Toolchain Version  [9.0/10.0/11.0/12.0/14.0/cygwin/mingw]
-::     CONFIGURATION  -  determines EPICS build  [dynamic/static, -debug]
-::     PLATFORM       -  "x86" -> use 32bit architecture
-::
-:: Prepares an Appveyor build by excuting the following steps
-::     - Set up configure\CONFIG_SITE for static vs. dynamic build
-::     - Install Cygwin / Mingw  (TOOLCHAIN setting) in the in the appropriate flavor
-::     - Download and install Make-4.1 from EPICS download page
-
-Setlocal EnableDelayedExpansion
-
-set OS=64BIT
-if "%PLATFORM%"=="x86" set OS=32BIT
-
-echo [INFO] Platform: %OS%
-
-if "%TOOLCHAIN%"=="cygwin" (
-    echo.%CONFIGURATION% | findstr /C:"static">nul && (
-        echo SHARED_LIBRARIES=NO>> configure\CONFIG_SITE
-        echo STATIC_BUILD=YES>> configure\CONFIG_SITE
-        echo [INFO] EPICS set up for static build
-    ) || (
-        echo [INFO] EPICS set up for dynamic build
-    )
-    echo.%CONFIGURATION% | findstr /C:"debug">nul && (
-        echo HOST_OPT=NO>> configure\CONFIG_SITE
-        echo [INFO] EPICS set up for debug build
-    ) || (
-        echo [INFO] EPICS set up for optimized build
-    )
-    if "%OS%"=="64BIT" (
-        echo [INFO] Installing Cygwin 64bit and dependencies
-        @powershell -Command "(new-object net.webclient).DownloadFile('http://www.cygwin.com/setup-x86_64.exe', 'C:\cygwin64\setup-x86_64.exe')"
-        C:\cygwin64\setup-x86_64.exe -q -P "libreadline-devel,libncursesw-devel"
-    ) else (
-        echo [INFO] Installing Cygwin 32bit and dependencies
-        @powershell -Command "(new-object net.webclient).DownloadFile('http://www.cygwin.com/setup-x86.exe', 'C:\cygwin\setup-x86.exe')"
-        C:\cygwin\setup-x86.exe -q -P "libreadline-devel,libncursesw-devel"
-    )
-)
-
-if "%TOOLCHAIN%"=="mingw" (
-    echo.%CONFIGURATION% | findstr /C:"static">nul && (
-        echo SHARED_LIBRARIES=NO>> configure\CONFIG_SITE
-        echo STATIC_BUILD=YES>> configure\CONFIG_SITE
-        echo [INFO] EPICS set up for static build
-    ) || (
-        echo [INFO] EPICS set up for dynamic build
-    )
-    echo.%CONFIGURATION% | findstr /C:"debug">nul && (
-        echo HOST_OPT=NO>> configure\CONFIG_SITE
-        echo [INFO] EPICS set up for debug build
-    ) || (
-        echo [INFO] EPICS set up for optimized build
-    )
-    if "%OS%"=="64BIT" (
-        echo [INFO] Installing MinGW 64bit
-        cinst mingw || cinst mingw
-    ) else (
-        echo [INFO] Installing MinGW 32bit
-        cinst mingw --x86 || cinst mingw --x86
-    )
-)
-
-echo [INFO] Installing Make 4.1
-curl -fsS --retry 3 -o C:\tools\make-4.1.zip https://epics.anl.gov/download/tools/make-4.1-win64.zip
-cd \tools
-"C:\Program Files\7-Zip\7z" e make-4.1.zip

.ci/checkout-modules.sh

@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# Checkout submodules on their appropriate branches
-#
-
-git submodule foreach '\
-    git checkout `git config -f $toplevel/.gitmodules submodule.$name.branch` && \
-    git pull '

.gitattributes

@@ -1,5 +0,0 @@
-.ci/          export-ignore
-.tools/       export-ignore
-.appveyor.yml export-ignore
-.travis.yml   export-ignore
-README        export-subst

.gitignore

@@ -7,8 +7,6 @@
 /include/
 /templates/
 /configure/*.local
-/modules/RELEASE.*.local
-/modules/Makefile.local
 O.*/
 /QtC-*
 *.orig

.gitmodules

@@ -1,24 +0,0 @@
-[submodule "modules/pvData"]
-    path = modules/pvData
-    url = https://github.com/epics-base/pvDataCPP
-    branch = master
-[submodule "modules/pvAccess"]
-    path = modules/pvAccess
-    url = https://github.com/epics-base/pvAccessCPP
-    branch = master
-[submodule "modules/normativeTypes"]
-    path = modules/normativeTypes
-    url = https://github.com/epics-base/normativeTypesCPP
-    branch = master
-[submodule "modules/pvaClient"]
-    path = modules/pvaClient
-    url = https://github.com/epics-base/pvaClientCPP
-    branch = master
-[submodule "modules/pvDatabase"]
-    path = modules/pvDatabase
-    url = https://github.com/epics-base/pvDatabaseCPP
-    branch = master
-[submodule "modules/pva2pva"]
-    path = modules/pva2pva
-    url = https://github.com/epics-base/pva2pva
-    branch = master

.tools/make-tar.sh

@@ -1,112 +0,0 @@
-#!/bin/sh
-#
-# Make tar for git repo w/ one level of sub modules.
-#
-set -e
-
-die() {
-  echo "$1" >&2
-  exit 1
-}
-
-TOPREV="$1"
-FINALTAR="$2"
-PREFIX="$3"
-
-if ! [ "$TOPREV" ]
-then
-   cat <<EOF >&2
-usage: $0 [rev] [outfile.tar.gz] [prefix/]
-
-  <rev> may be any git revision spec. (tag, branch, or commit id).
-
-  Output file may be .tar.gz, .tar.bz2, or any extension supported by "tar -a".
-  If output file name is omitted, "base-<rev>.tar.gz" will be used.
-  If <prefix> is omitted, the default prefix is "base-<rev>/".
-EOF
-   exit 1
-fi
-
-[ "$FINALTAR" ] || FINALTAR="base-$TOPREV.tar.gz"
-[ "$PREFIX" ] || PREFIX="base-$TOPREV/"
-
-case "$PREFIX" in
-*/) ;;
-*)  die "Prefix must end with '/'";;
-esac
-
-# Check for both <tag> and R<tag>
-if [ "$TOPREV" = "HEAD" ]
-then
-  true
-elif ! [ `git tag -l $TOPREV` ]
-then
-  if [ `git tag -l R$TOPREV` ]
-  then
-    TOPREV="R$TOPREV"
-  else
-    die "No tags exist '$TOPREV' or 'R$TOPREV'"
-  fi
-fi
-
-# temporary directory w/ automatic cleanup
-TDIR=`mktemp -d`
-trap 'rm -rf "$TDIR"' EXIT INT QUIT TERM
-
-mkdir "$TDIR"/tar
-
-echo "Exporting revision $TOPREV as $FINALTAR with prefix $PREFIX"
-
-# Use git-archive to copy files at the given revision into our temp. dir.
-# Respects 'export-exclude' in .gitattributes files.
-
-git archive --prefix=$PREFIX $TOPREV | tar -C "$TDIR"/tar -x
-
-# use ls-tree instead of submodule-foreach to capture submodule revision associated with supermodule rev.
-#
-# sub-modules appear in tree as eg.:
-#  160000 commit c3a6cfcf0dad4a4eeecf59b474710d06ff3eb68a  modules/ca
-git ls-tree -r $TOPREV | awk '/^[0-9]+ commit / {print $3, $4}' | \
-while read HASH MODDIR
-do
-    echo "Visiting $HASH $MODDIR"
-    git -C $MODDIR archive --prefix=${PREFIX}${MODDIR}/ $HASH | tar -C "$TDIR"/tar -x
-done
-
-# make a list of files copied and filter out undesirables
-
-(cd "$TDIR"/tar && find . -mindepth 1 -not -type d) > "$TDIR"/list.1
-
-# Remove leading ./ from filenames
-sed -i -e 's|^\./||' "$TDIR"/list.1
-
-# Exclude files
-sed \
-  -e '/\/\.\?ci\//d' \
-  -e '/\/\.tools\//d' \
-  -e '/\/jenkins\//d' \
-  -e '/\/\.git/d' \
-  -e '/\/\.project$/d' \
-  -e '/\/\.travis\.yml$/d' \
-  -e '/\/\.appveyor\.yml$/d' \
-  "$TDIR"/list.1 > "$TDIR"/list.2
-
-if ! diff -U 0 "$TDIR"/list.1 "$TDIR"/list.2
-then
-    echo "Excluding the files shown above"
-fi
-
-# Use the filtered list to build the final tar
-#  The -a option chooses compression automatically based on output file name.
-
-tar -C "$TDIR"/tar --files-from="$TDIR"/list.2 -caf "$FINALTAR"
-
-echo "Wrote $FINALTAR"
-
-tar -taf "$FINALTAR" > "$TDIR"/list.3
-
-# make sure we haven't picked up anything extra
-if ! diff -u "$TDIR"/list.2 "$TDIR"/list.3
-then
-    echo "Oops! Tarfile diff against plan shown above"
-fi

.travis.yml

@@ -3,6 +3,16 @@ dist: trusty
 language: c
 compiler:
   - gcc
+env:
+  - CMPLR=gcc
+  - CMPLR=gcc EXTRA=CMD_CXXFLAGS=-std=c++11
+  - CMPLR=gcc STATIC=YES
+  - CMPLR=clang
+  - CMPLR=clang STATIC=YES
+  - WINE=32 TEST=NO STATIC=YES
+  - WINE=32 TEST=NO STATIC=NO
+  - RTEMS=4.10 TEST=NO
+  - RTEMS=4.9 TEST=NO
 addons:
   apt:
     packages:
@@ -11,17 +21,12 @@ addons:
     - perl
     - clang
     - g++-mingw-w64-i686
-    - qemu-system-x86
-script:
-  - .ci/travis-build.sh
-env:
-  - CMPLR=gcc
-  - CMPLR=clang
-  - CMPLR=gcc   STATIC=YES
-  - CMPLR=clang STATIC=YES
-  - CMPLR=gcc   EXTRA=CMD_CXXFLAGS=-std=c++11
-  - CMPLR=clang EXTRA=CMD_CXXFLAGS=-std=c++11
-  - WINE=32 TEST=NO STATIC=YES
-  - WINE=32 TEST=NO STATIC=NO
-  - RTEMS=4.10 TEST=YES
-  - RTEMS=4.9  TEST=YES
+    - bison
+    - flex
+    - texinfo
+    - install-info
+cache:
+  directories:
+   - $HOME/.cache
+install: sh ci/travis-prepare.sh </dev/null
+script: sh ci/travis-build.sh </dev/null

Makefile

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 TOP = .
@@ -14,12 +14,8 @@ include $(TOP)/configure/CONFIG
 TOOLS = $(TOP)/src/tools
 
 DIRS += configure src
+
 src_DEPEND_DIRS = configure
 
-DIRS += test
-test_DEPEND_DIRS = src
-
-DIRS += modules
-modules_DEPEND_DIRS = src
-
 include $(TOP)/configure/RULES_TOP
+

README

@@ -2,14 +2,14 @@
 EPICS Base - the central core of a control system toolkit
 ---------------------------------------------------------
 
-Copyright UChicago Argonne LLC, as Operator of Argonne
-National Laboratory.
+Copyright (c) 1991-2003 The University of Chicago, as Operator
+of Argonne National Laboratory.
 Copyright (c) 1991-2003 The Regents of the University of
 California, as Operator of Los Alamos National Laboratory.
 
-EPICS Base is distributed subject to a Software License
-Agreement found in the file LICENSE that is included with
-this distribution.
+EPICS Base Versions 3.13.7 and higher are distributed
+subject to a Software License Agreement found in the
+file LICENSE that is included with this distribution.
 
 ---------------------------------------------------------
 
@@ -22,6 +22,3 @@ training materials, additional components, links to other
 websites etc. is available on the EPICS home page at
 	https://epics.anl.gov/
 
-$Format:%cD$
-$Format:%H$
-https://code.launchpad.net/epics-base

appveyor.yml

@@ -16,7 +16,7 @@ init:
   - git config --global core.autocrlf true
 
 # Set clone depth (do not fetch complete history)
-clone_depth: 50
+clone_depth: 2
 
 # Skipping commits affecting only specific files
 skip_commits:
@@ -46,8 +46,8 @@ environment:
   - TOOLCHAIN: 14.0
   - APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2017
     TOOLCHAIN: 2017
-  - TOOLCHAIN: cygwin
   - TOOLCHAIN: mingw
+    APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2015
 
 # Platform: architecture
 platform:
@@ -61,19 +61,19 @@ matrix:
   - platform: x64
     TOOLCHAIN: 10.0
 
+
 #---------------------------------#
 #     building & testing          #
 #---------------------------------#
 
 install:
-  - cmd: git submodule update --init --recursive
-  - cmd: .ci/appveyor-prepare.bat
+  - cmd: ci/appveyor-prepare.bat
 
 build_script:
-  - cmd: .ci/appveyor-make.bat
+  - cmd: ci/appveyor-make.bat
 
 test_script:
-  - cmd: .ci/appveyor-make.bat runtests
+  - cmd: ci/appveyor-make.bat runtests
 
 #---------------------------------#
 #         notifications           #
@@ -81,6 +81,9 @@ test_script:
 
 notifications:
 
-  - provider: Slack
-    incoming_webhook:
-      secure: RYOm3FIUYeZGjWKaeTVKwq+C3fzK54AKwbmAoECED45mex3lN+8HmrC845a6mg9xPUJ/ND51RopWVaKDD9/UzaM0SO195RQLKqUTIUafiuM=
+  - provider: Email
+    to:
+      - core-talk@aps.anl.gov
+    on_build_success: false
+
+  - provider: GitHubPullRequest

ci/appveyor-make.bat

@@ -1,6 +1,6 @@
 :: Universal build script for AppVeyor (https://ci.appveyor.com/)
 :: Environment:
-::     TOOLCHAIN      -  toolchain version   [10.0/11.0/12.0/14.0/2017/cygwin/mingw]
+::     TOOLCHAIN      -  toolchain version   [10.0/11.0/12.0/14.0/2017/mingw]
 ::     CONFIGURATION  -  determines EPICS build   [dynamic/static]
 ::     PLATFORM       -  architecture   [x86/x64]
 ::
@@ -20,35 +20,17 @@ echo [INFO] Platform: %OS%
 set "MAKEARGS=-j2 -Otarget"
 if "%APPVEYOR_REPO_BRANCH%"=="3.14" set MAKEARGS=
 
-if "%TOOLCHAIN%"=="cygwin" (
-    set "MAKE=make"
-    if "%OS%"=="64BIT" (
-        set "EPICS_HOST_ARCH=cygwin-x86_64"
-        set "INCLUDE=C:\cygwin64\include;%INCLUDE%"
-        set "PATH=C:\cygwin64\bin;%PATH%"
-        echo [INFO] Cygwin Toolchain 64bit
-    ) else (
-        set "EPICS_HOST_ARCH=cygwin-x86"
-        set "INCLUDE=C:\cygwin\include;%INCLUDE%"
-        set "PATH=C:\cygwin\bin;%PATH%"
-        echo [INFO] Cygwin Toolchain 32bit
-    )
-    echo [INFO] Compiler Version
-    gcc -v
-    goto Finish
-)
-
 if "%TOOLCHAIN%"=="mingw" (
     set "MAKE=mingw32-make"
     if "%OS%"=="64BIT" (
         set "EPICS_HOST_ARCH=windows-x64-mingw"
-        set "INCLUDE=C:\tools\mingw64\include;%INCLUDE%"
-        set "PATH=C:\tools\mingw64\bin;%PATH%"
+        set "INCLUDE=C:\mingw-w64\x86_64-8.1.0-posix-seh-rt_v6-rev0\mingw64\include;%INCLUDE%"
+        set "PATH=C:\mingw-w64\x86_64-8.1.0-posix-seh-rt_v6-rev0\mingw64\bin;%PATH%"
         echo [INFO] MinGW Toolchain 64bit
     ) else (
         set "EPICS_HOST_ARCH=win32-x86-mingw"
-        set "INCLUDE=C:\tools\mingw32\include;%INCLUDE%"
-        set "PATH=C:\tools\mingw32\bin;%PATH%"
+        set "INCLUDE=C:\mingw-w64\i686-6.3.0-posix-dwarf-rt_v5-rev1\mingw32\include;%INCLUDE%"
+        set "PATH=C:\mingw-w64\i686-6.3.0-posix-dwarf-rt_v5-rev1\mingw32\bin;%PATH%"
         echo [INFO] MinGW Toolchain 32bit
     )
     echo [INFO] Compiler Version

ci/appveyor-prepare.bat

@@ -0,0 +1,38 @@
+:: Build script for AppVeyor (https://ci.appveyor.com/)
+:: Environment:
+::     TOOLCHAIN      -  Toolchain Version  [9.0/10.0/11.0/12.0/14.0/mingw]
+::     CONFIGURATION  -  determines EPICS build  [dynamic/static, -debug]
+::     PLATFORM       -  "x86" -> use 32bit architecture
+::
+:: Prepares an Appveyor build by excuting the following steps
+::     - Set up configure\CONFIG_SITE for static vs. dynamic build
+::     - Install Mingw  (TOOLCHAIN setting) in the in the appropriate flavor
+::     - Download and install Make-4.1 from EPICS download page
+
+Setlocal EnableDelayedExpansion
+
+set OS=64BIT
+if "%PLATFORM%"=="x86" set OS=32BIT
+
+echo [INFO] Platform: %OS%
+
+if "%TOOLCHAIN%"=="mingw" (
+    echo.%CONFIGURATION% | findstr /C:"static">nul && (
+        echo SHARED_LIBRARIES=NO>> configure\CONFIG_SITE
+        echo STATIC_BUILD=YES>> configure\CONFIG_SITE
+        echo [INFO] EPICS set up for static build
+    ) || (
+        echo [INFO] EPICS set up for dynamic build
+    )
+    echo.%CONFIGURATION% | findstr /C:"debug">nul && (
+        echo HOST_OPT=NO>> configure\CONFIG_SITE
+        echo [INFO] EPICS set up for debug build
+    ) || (
+        echo [INFO] EPICS set up for optimized build
+    )
+)
+
+echo [INFO] Installing Make 4.2.1 from ANL web site
+curl -fsS --retry 3 -o C:\tools\make-4.2.1.zip https://epics.anl.gov/download/tools/make-4.2.1-win64.zip
+cd \tools
+"C:\Program Files\7-Zip\7z" e make-4.2.1.zip

ci/travis-build.sh

@@ -6,9 +6,18 @@ die() {
   exit 1
 }
 
+ticker() {
+  while true
+  do
+    sleep 60
+    date -R
+    [ -r "$1" ] && tail -n10 "$1"
+  done
+}
+
 CACHEKEY=1
 
-export EPICS_HOST_ARCH=`perl src/tools/EpicsHostArch.pl`
+EPICS_HOST_ARCH=`perl src/tools/EpicsHostArch.pl`
 
 [ -e configure/os/CONFIG_SITE.Common.linux-x86 ] || die "Wrong location: $PWD"
 
@@ -48,30 +57,34 @@ EOF
 fi
 
 # set RTEMS to eg. "4.9" or "4.10"
+# requires qemu, bison, flex, texinfo, install-info
 if [ -n "$RTEMS" ]
 then
   echo "Cross RTEMS${RTEMS} for pc386"
-  curl -L "https://github.com/mdavidsaver/rsb/releases/download/20171203-${RTEMS}/i386-rtems${RTEMS}-trusty-20171203-${RTEMS}.tar.bz2" \
-  | tar -C / -xmj
+  install -d /home/travis/.cache
+  curl -L "https://github.com/mdavidsaver/rsb/releases/download/travis-20160306-2/rtems${RTEMS}-i386-trusty-20190306-2.tar.gz" \
+  | tar -C /home/travis/.cache -xj
 
   sed -i -e '/^RTEMS_VERSION/d' -e '/^RTEMS_BASE/d' configure/os/CONFIG_SITE.Common.RTEMS
   cat << EOF >> configure/os/CONFIG_SITE.Common.RTEMS
 RTEMS_VERSION=$RTEMS
-RTEMS_BASE=$HOME/.rtems
+RTEMS_BASE=/home/travis/.cache/rtems${RTEMS}-i386
 EOF
   cat << EOF >> configure/CONFIG_SITE
-CROSS_COMPILER_TARGET_ARCHS += RTEMS-pc386-qemu
+CROSS_COMPILER_TARGET_ARCHS+=RTEMS-pc386
 EOF
 
   # find local qemu-system-i386
+  export PATH="$HOME/.cache/qemu/usr/bin:$PATH"
   echo -n "Using QEMU: "
   type qemu-system-i386 || echo "Missing qemu"
+  EXTRA=RTEMS_QEMU_FIXUPS=YES
 fi
 
 make -j2 $EXTRA
 
 if [ "$TEST" != "NO" ]
 then
-   make -j2 tapfiles
+   make tapfiles
    make -s test-results
 fi

ci/travis-prepare.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+set -e -x
+
+die() {
+  echo "$1" >&2
+  exit 1
+}
+
+CURDIR="$PWD"
+
+QDIR="$HOME/.cache/qemu"
+
+if [ -n "$RTEMS" -a "$TEST" = "YES" ]
+then
+  git clone --quiet --branch vme --depth 10 https://github.com/mdavidsaver/qemu.git "$HOME/.build/qemu"
+  cd "$HOME/.build/qemu"
+
+  HEAD=`git log -n1 --pretty=format:%H`
+  echo "HEAD revision $HEAD"
+
+  [ -e "$HOME/.cache/qemu/built" ] && BUILT=`cat "$HOME/.cache/qemu/built"`
+  echo "Cached revision $BUILT"
+
+  if [ "$HEAD" != "$BUILT" ]
+  then
+    echo "Building QEMU"
+    git submodule --quiet update --init
+
+    install -d "$HOME/.build/qemu/build"
+    cd         "$HOME/.build/qemu/build"
+
+    "$HOME/.build/qemu/configure" --prefix="$HOME/.cache/qemu/usr" --target-list=i386-softmmu --disable-werror
+    make -j2
+    make install
+
+    echo "$HEAD" > "$HOME/.cache/qemu/built"
+  fi
+fi
+
+cd "$CURDIR"

configure/CONFIG.gnuCommon

@@ -24,14 +24,9 @@ LD = $(GNU_BIN)/$(CMPLR_PREFIX)ld$(CMPLR_SUFFIX) -r
 CPP = $(CC) -x c -E
 RANLIB = $(GNU_BIN)/$(CMPLR_PREFIX)ranlib$(CMPLR_SUFFIX)
 
-# Requires at least GCC 4.8 or LLVM (clang) 3.1
-ASAN_FLAGS_YES = -fsanitize=address
-ASAN_LDFLAGS_YES = $(ASAN_FLAGS_YES)
-
 PROF_CFLAGS_YES = -p
 GPROF_CFLAGS_YES = -pg
 CODE_CFLAGS = $(PROF_CFLAGS_$(PROFILE)) $(GPROF_CFLAGS_$(GPROF))
-CODE_CFLAGS += $(ASAN_FLAGS_$(ENABLE_ASAN))
 WARN_CFLAGS_YES = -Wall
 WARN_CFLAGS_NO = -w
 OPT_CFLAGS_YES = -O3
@@ -40,14 +35,12 @@ OPT_CFLAGS_NO = -g
 PROF_CXXFLAGS_YES = -p
 GPROF_CXXFLAGS_YES = -pg
 CODE_CXXFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))
-CODE_CXXFLAGS += $(ASAN_FLAGS_$(ENABLE_ASAN))
 WARN_CXXFLAGS_YES = -Wall
 WARN_CXXFLAGS_NO = -w
 OPT_CXXFLAGS_YES = -O3
 OPT_CXXFLAGS_NO = -g
 
 CODE_LDFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))
-CODE_LDFLAGS += $(ASAN_LDFLAGS_$(ENABLE_ASAN))
 
 PIPE_CFLAGS_YES_YES = -pipe
 PIPE_CFLAGS = $(PIPE_CFLAGS_$(GCC_PIPE)_$(GNU))

configure/CONFIG_ADDONS

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
 #	check for add-on CFLAGS and CXXFLAGS
@@ -37,6 +37,9 @@
 #    PROD_LIBS     libs needed by PROD and TESTPROD
 #    LIB_LIBS      libs needed by shared LIBRARY
 #    SHRLIB_LIBS   libs needed by shared LIBRARY
+#    USR_OBJLIBS   R3.13 vxWorks object libs needed building libraries and prods
+#    PROD_OBJLIBS  R3.13 vxWorks object    libs needed for building prods
+#    LIB_OBJLIBS   R3.13 vxWorks object libs needed for building libraries
 #    USR_SYS_LIBS  system libs needed building libraries and prods
 #    PROD_SYS_LIBS system libs needed for building prods
 #    LIB_SYS_LIBS  system libs needed for building libraries
@@ -270,6 +273,30 @@ OBJS_HOST+=$(OBJS_HOST_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(PROD_OBJLIBS_$(OS_CLASS))),)
+PROD_OBJLIBS+=$(subst -nil-,,$(PROD_OBJLIBS_$(OS_CLASS)))
+else
+ifdef PROD_OBJLIBS_DEFAULT
+PROD_OBJLIBS+=$(PROD_OBJLIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(LIB_OBJLIBS_$(OS_CLASS))),)
+LIB_OBJLIBS+=$(subst -nil-,,$(LIB_OBJLIBS_$(OS_CLASS)))
+else
+ifdef LIB_OBJLIBS_DEFAULT
+LIB_OBJLIBS+=$(LIB_OBJLIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(USR_OBJLIBS_$(OS_CLASS))),)
+USR_OBJLIBS+=$(subst -nil-,,$(USR_OBJLIBS_$(OS_CLASS)))
+else
+ifdef USR_OBJLIBS_DEFAULT
+USR_OBJLIBS+=$(USR_OBJLIBS_DEFAULT)
+endif
+endif
+
 ifneq ($(strip $(LIB_OBJS_$(OS_CLASS))),)
 LIB_OBJS+=$(subst -nil-,,$(LIB_OBJS_$(OS_CLASS)))
 else
@@ -554,3 +581,4 @@ ifdef LIB_RCS_DEFAULT
 LIB_RCS+=$(LIB_RCS_DEFAULT)
 endif
 endif
+

configure/CONFIG_BASE

@@ -3,12 +3,13 @@
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 #---------------------------------------------------------------
-# EPICS Base directories
+# Epics base directories
 
 EPICS_BASE_HOST_BIN = $(EPICS_BASE)/bin/$(EPICS_HOST_ARCH)
 EPICS_BASE_HOST_LIB = $(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)
@@ -17,6 +18,17 @@ ifdef T_A
   EPICS_BASE_BIN    = $(EPICS_BASE)/bin/$(T_A)
 endif
 
+#---------------------------------------------------------------
+# Epics base Ioc libraries 
+
+EPICS_BASE_IOC_LIBS += dbRecStd dbCore ca Com 
+
+#---------------------------------------------------------------
+# Epics base Host libraries 
+
+EPICS_BASE_HOST_LIBS += cas gdd
+EPICS_BASE_HOST_LIBS += ca Com
+
 #---------------------------------------------------------------
 # Version number for base shared libraries (and win32 products)
 
@@ -27,6 +39,17 @@ ifdef BASE_TOP
   PROD_VERSION = $(EPICS_VERSION).$(EPICS_REVISION)
 endif # BASE_TOP
 
+#---------------------------------------------------------------
+# Base c preprocessor flags
+
+BASE_CPPFLAGS = 
+
+# osithread default stack
+OSITHREAD_USE_DEFAULT_STACK = NO
+OSITHREAD_DEFAULT_STACK_FLAGS_YES = -DOSITHREAD_USE_DEFAULT_STACK
+OSITHREAD_DEFAULT_STACK_FLAGS_NO =
+BASE_CPPFLAGS += $(OSITHREAD_DEFAULT_STACK_FLAGS_$(OSITHREAD_USE_DEFAULT_STACK))
+
 #---------------------------------------------------------------
 # Where to find the installed build tools
 #   Windows does not like commands with relative paths starting ../
@@ -36,21 +59,61 @@ TOOLS = $(abspath $(EPICS_BASE_HOST_BIN))
 FIND_TOOL = $(firstword $(wildcard $(TOOLS)/$(1) $(TOP)/src/tools/$(1)))
 
 #---------------------------------------------------------------
-# EPICS Base build tools and tool flags
+# Epics base build tools and tool flags
 
-PODTOHTML        = $(PERL) $(TOOLS)/podToHtml.pl
-CONVERTRELEASE   = $(PERL) $(call FIND_TOOL,convertRelease.pl)
-FULLPATHNAME     = $(PERL) $(TOOLS)/fullPathName.pl
-TAPTOJUNIT       = $(PERL) $(TOOLS)/tap-to-junit-xml.pl
-GENVERSIONHEADER = $(PERL) $(TOOLS)/genVersionHeader.pl $(QUIET_FLAG) $(QUESTION_FLAG)
+MAKEBPT                    = $(TOOLS)/makeBpt$(HOSTEXE)
+DBEXPAND                   = $(PERL) $(TOOLS)/dbdExpand.pl
+DBTORECORDTYPEH            = $(PERL) $(TOOLS)/dbdToRecordtypeH.pl
+DBTOMENUH                  = $(PERL) $(TOOLS)/dbdToMenuH.pl
+REGISTERRECORDDEVICEDRIVER = $(PERL) $(TOOLS)/registerRecordDeviceDriver.pl
+CONVERTRELEASE             = $(PERL) $(call FIND_TOOL,convertRelease.pl)
+FULLPATHNAME               = $(PERL) $(TOOLS)/fullPathName.pl
+TAPTOJUNIT                 = $(PERL) $(TOOLS)/tap-to-junit-xml.pl
+PROVE                      = $(PERL) $(TOOLS)/epicsProve.pl
 
-#---------------------------------------------------------------
+#-------------------------------------------------------
 # tools for installing libraries and products
-INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(QUIET_FLAG)
+INSTALL_QUIETLY := $(if $(findstring s,$(MFLAGS)),-q,)
+INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(INSTALL_QUIETLY)
 INSTALL_PRODUCT = $(INSTALL)
 INSTALL_LIBRARY = $(INSTALL)
 
 #---------------------------------------------------------------
-# tools for making header dependencies and variable replacement
-MKMF       = $(PERL) $(TOOLS)/mkmf.pl
-REPLACEVAR = $(PERL) $(TOOLS)/replaceVAR.pl
+# tools for making header dependancies and variable replacement
+MKMF                       = $(PERL) $(TOOLS)/mkmf.pl
+REPLACEVAR                 = $(PERL) $(TOOLS)/replaceVAR.pl
+
+#---------------------------------------------------------------
+# private versions of lex/yacc from EPICS
+EYACC = $(TOOLS)/antelope$(HOSTEXE)
+ELEX = $(TOOLS)/e_flex$(HOSTEXE) -S$(EPICS_BASE)/include/flex.skel.static
+
+YACC  = $(EYACC)
+LEX   = $(ELEX)
+
+#---------------------------------------------------------------
+# Our use of msi is incompatible with older versions
+
+MSI3_15 = $(EPICS_BASE_HOST_BIN)/msi
+
+#---------------------------------------------------------------
+# External tools and tool flags - must be in path or defined in application
+
+ADL2DL ?= adl2dl
+
+# sch2edif compiler and flags
+SCH2EDIF = sch2edif
+SCH2EDIF_PATH =
+SCH2EDIF_SYSFLAGS = -n -ap -p.+..+$(SCH2EDIF_PATH)+$(CAPFAST_TEMPLATES)/sym+
+SCH2EDIF_FLAGS =
+ 
+# e2db and flags
+#    - again there is an assumption where edb.def is installed.
+E2DB ?= e2db
+E2DB_SYSFLAGS = -ate -d $(CAPFAST_TEMPLATES)/edb.def
+E2DB_FLAGS =
+
+DBST ?= dbst
+
+
+

configure/CONFIG_BASE_VERSION

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# in the file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
 #  EPICS Version information
@@ -15,44 +15,23 @@
 # EPICS_SITE_VERSION is defined in CONFIG_SITE for sites that want a local
 # version number to be included in the reported version string.
 
-# We define convenience macros for our release series to be NO or YES, so
-# Makefiles can detect 'Series X or later', or 'Series X only' like this:
-#
-#   ifdef BASE_3_14
-#       true for 3.14 or later
-#   ifdef BASE_3_15
-#       true for 3.15 or later
-#   ifdef BASE_3_16
-#       true for 3.16 or later
-#   ifdef BASE_7_0
-#       true for 7.0 or later
-#
-#   ifeq ($(BASE_3_14),YES)
-#       true for 3.14.x only
-#   ifeq ($(BASE_3_15),YES)
-#       true for 3.15.x only
-#   ifeq ($(BASE_3_16),YES)
-#       true for 3.16.x only.
-#   ifeq ($(BASE_7_0),YES)
-#       true for 7.0.x only.
-
+# In 3.15 we still define BASE_3_14 so "ifdef BASE_3_14" means
+# 3.14 or later, but "ifeq ($(BASE_3_14),YES)" means 3.14 only.
 BASE_3_14 = NO
-BASE_3_15 = NO
-BASE_3_16 = NO
-BASE_7_0  = YES
+BASE_3_15 = YES
 
 # EPICS_VERSION must be a number >0 and <256
-EPICS_VERSION = 7
+EPICS_VERSION = 3
 
 # EPICS_REVISION must be a number >=0 and <256
-EPICS_REVISION = 0
+EPICS_REVISION = 15
 
 # EPICS_MODIFICATION must be a number >=0 and <256
-EPICS_MODIFICATION = 2
+EPICS_MODIFICATION = 7
 
 # EPICS_PATCH_LEVEL must be a number (win32 resource file requirement)
 # Not included if zero
-EPICS_PATCH_LEVEL = 1
+EPICS_PATCH_LEVEL = 0
 
 # This will end in -DEV between official releases
 #EPICS_DEV_SNAPSHOT=-DEV

configure/CONFIG_COMMON

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
 #  CONFIG_COMMON
@@ -38,6 +38,10 @@ BUILD_ARCHS = $(EPICS_HOST_ARCH) $(CROSS1) $(CROSS2)
 # otherwise override this in os/CONFIG_SITE.<host_arch>.Common
 PERL = perl -CSD
 
+#-------------------------------------------------------
+# dbst based database optimization default
+DB_OPT = NO
+
 #-------------------------------------------------------
 # Check configure/RELEASE file for consistency
 CHECK_RELEASE_YES = checkRelease
@@ -76,14 +80,9 @@ COMMON_DIR = ../O.Common
 IOCS_APPL_TOP               = $(shell $(FULLPATHNAME) $(INSTALL_LOCATION))
 
 #-------------------------------------------------------
-# Silencing the build - suppress messages during 'make -s'
+# Make echo output - suppress echoing if make's '-s' flag is set
 NOP = :
 ECHO = @$(if $(findstring s,$(MFLAGS)),$(NOP),echo)
-QUIET_FLAG := $(if $(findstring s,$(MFLAGS)),-q,)
-
-#-------------------------------------------------------
-# Convert 'make -q' flag into '-i' for genVersionHeader.pl
-QUESTION_FLAG := $(if $(findstring q,$(MFLAGS)),-i,)
 
 #-------------------------------------------------------
 ifdef T_A
@@ -93,7 +92,7 @@ INSTALL_SHRLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
 INSTALL_TCLLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
 INSTALL_BIN                 = $(INSTALL_LOCATION_BIN)/$(T_A)
 
-# Directories for libraries
+#Directories for libraries
 SHRLIB_SEARCH_DIRS          = $(INSTALL_LIB)
 
 #-------------------------------------------------------
@@ -167,13 +166,13 @@ TESTSHRLIBNAME = $(TESTSHRLIBNAME_$(SHARED_LIBRARIES))
 #--------------------------------------------------
 # obj files
 
-TARGET_OBJS =  $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS) $($*_SRCS)))
+TARGET_OBJS =  $($*_OBJLIBS) $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS) $($*_SRCS)))
 
 PRODUCT_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(PROD_SRCS) $(USR_OBJS) $(PROD_OBJS)))
-PROD_LD_OBJS = $(TARGET_OBJS) $(PRODUCT_OBJS)
+PROD_LD_OBJS = $(USR_OBJLIBS) $(PROD_OBJLIBS) $(TARGET_OBJS) $(PRODUCT_OBJS)
 
 LIBRARY_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(LIB_SRCS) $(LIBSRCS) $(USR_OBJS) $(LIB_OBJS)))
-LIBRARY_LD_OBJS = $(TARGET_OBJS) $(LIBRARY_OBJS)
+LIBRARY_LD_OBJS = $(USR_OBJLIBS) $(LIB_OBJLIBS) $(TARGET_OBJS) $(LIBRARY_OBJS)
 
 #--------------------------------------------------
 # Windows resource files
@@ -265,7 +264,7 @@ LIBRARY_SRCS=$(basename $(foreach lib,$(LIBRARY) $(TESTLIBRARY) $(LOADABLE_LIBRA
 LIBRARY_SRC_CFLAGS=$($(patsubst $*,SHRLIB,$(findstring $*,$(LIBRARY_SRCS)))_CFLAGS)
 
 #--------------------------------------------------
-# prefix, suffix, and ldflags for loadable shared libraries
+# prefix, suffix, and ldflags for loadable shared libraries 
 TARGET_LIB_LDFLAGS=$($(patsubst $*,LOADABLE_,$(findstring $*,$(LOADABLE_LIBRARY)))SHRLIB_LDFLAGS)
 LOADABLE_SHRLIB_PREFIX=$(SHRLIB_PREFIX)
 LOADABLE_SHRLIB_SUFFIX=$(SHRLIB_SUFFIX)
@@ -333,14 +332,6 @@ COMPILE.cpp = $(CCC) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES)
 # C preprocessor command
 PREPROCESS.cpp = $(CPP) $(CPPFLAGS) $(INCLUDES) $< > $@
 
-#--------------------------------------------------
-# genVersion header defaults
-
-# C macro name
-GENVERSIONMACRO = VCSVERSION
-# C macro default value (empty to use date+time)
-GENVERSIONDEFAULT =
-
 #--------------------------------------------------
 # Header dependency file generation
 
@@ -463,5 +454,5 @@ COMMON_INC += $(filter $(COMMON_DIR)/%, $(foreach file, $(INC), \
 SOURCE_INC = $(wildcard $(file) $(SOURCE_INC_bbb) )
 SOURCE_INC_bbb = $(foreach dir, $(ALL_SRC_DIRS), $(SOURCE_INC_aaa)  )
 SOURCE_INC_aaa = $(addsuffix /$(file), $(dir) )
-
+ 
 endif

configure/CONFIG_ENV

@@ -35,10 +35,8 @@ EPICS_CA_CONN_TMO=30.0
 EPICS_CA_REPEATER_PORT=5065
 EPICS_CA_SERVER_PORT=5064
 EPICS_CA_MAX_ARRAY_BYTES=16384
-EPICS_CA_AUTO_ARRAY_BYTES=YES
 EPICS_CA_BEACON_PERIOD=15.0
 EPICS_CA_MAX_SEARCH_PERIOD=300.0
-EPICS_CA_MCAST_TTL=1
 EPICS_CAS_BEACON_PERIOD=
 EPICS_CAS_BEACON_PORT=
 EPICS_CAS_AUTO_BEACON_ADDR_LIST=""
@@ -47,9 +45,6 @@ EPICS_CAS_SERVER_PORT=
 EPICS_CAS_INTF_ADDR_LIST=""
 EPICS_CAS_IGNORE_ADDR_LIST=""
 
-# Servers to disable
-EPICS_IOC_IGNORE_SERVERS=""
-
 # Log Server:
 # EPICS_IOC_LOG_PORT Log server port number etc.
 EPICS_IOC_LOG_PORT=7004

configure/CONFIG_SITE_ENV

@@ -24,40 +24,41 @@
 
 #  Site-specific environment settings
 
-# Time service:
-# EPICS_TIMEZONE
-#	Local timezone info for vxWorks and RTEMS.  The format is
-#	    <name>::<minutesWest>:<startDST>:<endDST>
-#	where <name> is only used by strftime() for %Z conversions,
-#	and <startDST> and <endDST> are mmddhh - that is month,day,hour
-#	e.g. for ANL in 2018: EPICS_TIMEZONE=CUS::360:031102:110402
-#	The future dates below assume the rules don't get changed;
-#	see http://www.timeanddate.com/time/dst/2018.html to check.
-#
-#	DST for 2019  US: Mar 10 - Nov 03
-#	              EU: Mar 31 - Oct 27
-EPICS_TIMEZONE = CUS::360:031002:110302
-#EPICS_TIMEZONE = MET::-60:033102:102703
-#
-#	DST for 2020  US: Mar 08 - Nov 01
-#	              EU: Mar 29 - Oct 25
-#EPICS_TIMEZONE = CUS::360:030802:110102
-#EPICS_TIMEZONE = MET::-60:032902:102503
-#
-#	DST for 2021  US: Mar 14 - Nov 07
-#	              EU: Mar 28 - Oct 31
-#EPICS_TIMEZONE = CUS::360:031402:110702
-#EPICS_TIMEZONE = MET::-60:032802:103103
-#
-#	DST for 2022  US: Mar 13 - Nov 06
-#	              EU: Mar 27 - Oct 30
-#EPICS_TIMEZONE = CUS::360:031302:110602
-#EPICS_TIMEZONE = MET::-60:032702:103003
-#
-#	DST for 2023  US: Mar 13 - Nov 06
-#	              EU: Mar 27 - Oct 30
-#EPICS_TIMEZONE = CUS::360:031202:110502
-#EPICS_TIMEZONE = MET::-60:032602:102903
+## Time service:
+# EPICS_TZ
+#       Local timezone rules for vxWorks and RTEMS. The value follows the Posix
+#       TZ environment variable's Mm.n.d/h format (see the IBM link below for
+#       details). If TZ hasn't already been set when the osdTime timeRegister()
+#       C++ static constructor runs, this parameter will be copied into the TZ
+#       environment variable. Once the OS clock has been synchronized to NTP the
+#       routine tz2timezone() will be run to convert TZ into the TIMEZONE
+#       variable format that VxWorks needs.
+#               https://developer.ibm.com/articles/au-aix-posix/
+
+# Japan Standard Time, no DST:
+#EPICS_TZ = "JST-9"
+
+# Central European (Summer) Time:
+#EPICS_TZ = "CET-1CEST,M3.5.0/2,M10.5.0/3"
+
+# Greenwich Mean/British Summer Time:
+#EPICS_TZ = "GMT0BST,M3.5.0/1,M10.5.0/2"
+
+# US Eastern Standard/Daylight Time:
+#EPICS_TZ = "EST5EDT,M3.2.0/2,M11.1.0/2"
+
+# US Central Standard/Daylight Time:
+EPICS_TZ = "CST6CDT,M3.2.0/2,M11.1.0/2"
+
+# US Mountain Standard/Daylight Time:
+#EPICS_TZ = "MST7MDT,M3.2.0/2,M11.1.0/2"
+
+# US Pacific Standard/Daylight Time:
+#EPICS_TZ = "PST8PDT,M3.2.0/2,M11.1.0/2"
+
+# US Hawaiian Standard Time, no DST:
+#EPICS_TZ = "HST10"
+
 
 # EPICS_TS_NTP_INET
 #	NTP time server ip address for VxWorks and RTEMS.
@@ -69,11 +70,8 @@ EPICS_TS_NTP_INET=
 #	Prompt string
 # IOCSH_HISTSIZE
 #	Number of lines of command history to keep.
-# IOCSH_HISTEDIT_DISABLE
-# 	Prevents use of readline or equivalent if defined.
 IOCSH_PS1="epics> "
 IOCSH_HISTSIZE=50
-IOCSH_HISTEDIT_DISABLE=
 
 # Log Server:
 # EPICS_IOC_LOG_INET 

configure/RULES

@@ -1,10 +1,11 @@
 #*************************************************************************
-# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 ifndef T_A

configure/RULES.Db

@@ -4,17 +4,14 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
+#RULES.Db
 
-# RULES.Db
-
-# Set db substitutions and template file suffixes
+# Set db substitutions file suffix
 SUBST_SUFFIX ?= .substitutions
-TEMPL_SUFFIX ?= .template
 
-#---------------------------------------------------------------
-# vpath
+#####################################################  vpath
 
 vpath %.pm $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.pod $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
@@ -22,13 +19,12 @@ vpath %.dbd $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.db $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %.vdb $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %$(SUBST_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
-vpath %$(TEMPL_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
+vpath %.template $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath bpt%.data $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acf $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acs $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 
-#---------------------------------------------------------------
-# dbflags dbdflags
+##################################################### dbflags dbdflags
 
 DBD_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DBD) $(RELEASE_DBD_DIRS)
 DB_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DB) $(RELEASE_DB_DIRS)
@@ -37,15 +33,13 @@ DBDFLAGS = $(USR_DBDFLAGS) $(CMD_DBDFLAGS) $(addprefix -I,$(DBD_SEARCH_DIRS))
 DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) $(CMD_DBFLAGS) $(addprefix -I,$(DB_SEARCH_DIRS))
 REGRDDFLAGS = $(DBDFLAGS) $($*_REGRDDFLAGS) $(USR_REGRDDFLAGS) $(CMD_REGRDDFLAGS)
 
-#---------------------------------------------------------------
-# Targets
+##################################################### Targets
 
 # ---------------------------------------------------
 # To allow os specific dbd files AND have the -j option work properly,
 
-CROSS_TARGET_OS_TYPES = $(sort $(foreach target, \
-    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS), \
-    $(firstword $(subst -, ,$(target)))))
+CROSS_TARGET_OS_TYPES = $(sort $(foreach target,  \
+    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS),$(firstword $(subst -, ,$(target)))))
 DBD += $(foreach type, $(CROSS_TARGET_OS_TYPES), $(DBD_$(type)))
 
 # Users add os specific dbd files to a Makefile as follows
@@ -92,28 +86,31 @@ SOURCE_DB_bbb = $(foreach dir, $(GENERIC_SRC_DIRS), $(SOURCE_DB_aaa)  )
 SOURCE_DB_aaa = $(addsuffix /$(file), $(dir) )
 
 COMMONS = $(COMMON_DIR)/*.dbd $(COMMON_DIR)/*.db $(COMMON_DIR)/*.h \
-          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*$(TEMPL_SUFFIX)
+          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*.template
 
 # Remove trailing numbers (to 99) on stem
-TEMPLATE1 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
-            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
-            $(patsubst %8,%,$(patsubst %9,%,$*))))))))))
-TEMPLATE2 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
-            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
-            $(patsubst %8,%,$(patsubst %9,%,$(TEMPLATE1)))))))))))
-TEMPLATE3 = $(addsuffix $(TEMPL_SUFFIX),$(addprefix ../,$(TEMPLATE2)))
-TEMPLATE_FILENAME = $(firstword $(wildcard $($*_TEMPLATE) \
-            $(addprefix ../,$($*_TEMPLATE)) ../$*$(TEMPL_SUFFIX) $(TEMPLATE3) \
-            ../template))
+TEMPLATE1=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
+          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
+          $*))))))))))
+TEMPLATE2=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
+          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
+          $(TEMPLATE1)))))))))))
+TEMPLATE3=$(addsuffix .template,$(addprefix ../,$(TEMPLATE2)))
+TEMPLATE_FILENAME=$(firstword $(wildcard $($*_TEMPLATE) $(addprefix ../,$($*_TEMPLATE)) ../$*.template $(TEMPLATE3) ../template))
+
+# dbst based database optimization
+ifeq '$(DB_OPT)' 'YES'
+RAW=.raw
+DBS = $(filter %.db,$(DB)) $(addsuffix $(RAW),$(filter %.db,$(DB)))
+COMMON_DBS = $(addprefix $(COMMON_DIR)/,$(DBS))
+endif
 
 INSTALL_DB_INSTALLS = $(addprefix $(INSTALL_DB)/,$(notdir $(DB_INSTALLS)))
 INSTALL_DBD_INSTALLS = $(addprefix $(INSTALL_DBD)/,$(notdir $(DBD_INSTALLS)))
 
 COMMONDEP_TARGET = $(COMMON_DIR)/$(basename $@)
 
-#---------------------------------------------------------------
-# acf files
-
+#####################################################  acf files
 # An access security configuration file, *.acf, can be created from
 # an *.acs file (has format of acf file plus #include "filename" lines)
 
@@ -126,8 +123,7 @@ ACF_INCLUDES = -I. $(TARGET_INCLUDES) $(USR_INCLUDES)\
 ACFDEPENDS_CMD = $(MKMF) -m $@ $(ACF_INCLUDES) $(COMMONDEP_TARGET) $<
 ACF_CMD = $(CPP) $(ACF_CPPFLAGS) $(ACF_INCLUDES) $< > $@
 
-#---------------------------------------------------------------
-# dependencies
+#####################################################  dependancies
 
 HINC += $(addsuffix .h,$(DBDINC_NAME))
 COMMON_DBDINC += $(addprefix $(COMMON_DIR)/,$(HINC))
@@ -137,12 +133,12 @@ DBDDEPENDS_FILES += $(addsuffix $(DEP),$(HINC) \
                     $(patsubst $(COMMON_DIR)/%,%, \
                     $(filter-out $(COMMON_DIR)/bpt%.dbd,$(COMMON_DBDS))))
 
-#---------------------------------------------------------------
+##################################################### 
 
 ifndef T_A
 
 DEP = .d
-TEMPLATE3 += $(addsuffix $(TEMPL_SUFFIX), $(TEMPLATE2))
+TEMPLATE3+=$(addsuffix .template, $(TEMPLATE2))
 
 COMMON_DIR = .
 INSTALL_DBDS =
@@ -157,13 +153,18 @@ ACTIONS += install
 ACTIONS += buildInstall
 ACTIONS += runtests tapfiles clean-tests test-results junitfiles
 
-actionArchTargets = $(foreach action, $(ACTIONS), \
-    $(foreach arch, $(BUILD_ARCHS), $(action)$(DIVIDER)$(arch)))
-cleanArchTargets = $(foreach arch, $(BUILD_ARCHS), clean$(DIVIDER)$(arch))
+actionArchTargets = $(foreach x, $(ACTIONS),\ $(foreach arch,$(BUILD_ARCHS), $(x)$(DIVIDER)$(arch)))
 
+cleanArchTargets = $(foreach arch,$(BUILD_ARCHS), clean$(DIVIDER)$(arch))
 -include $(TOP)/configure/CONFIG_APP_INCLUDE
 
 all: install
+ifeq ($(EPICS_HOST_ARCH),$T_A)
+host: install
+else
+# Do nothing
+host:
+endif
 
 install: buildInstall
 
@@ -171,30 +172,20 @@ buildInstall : build
 
 rebuild: clean install
 
-.PHONY: all $(ACTIONS)
+.PHONY: all host $(ACTIONS)
 
 $(actionArchTargets) $(BUILD_ARCHS): install
 $(cleanArchTargets): clean
 
 .PHONY: $(BUILD_ARCHS) $(actionArchTargets) $(cleanArchTargets)
 
-else
-  # T_A is defined
-  ifeq ($(EPICS_HOST_ARCH),$(T_A))
-    host: install
-  else
-    host:
-  endif
-
-  .PHONY: host
-endif # T_A
+endif # T_A defined
 
 ifneq (,$(strip $(DBDDEPENDS_FILES)))
 -include $(DBDDEPENDS_FILES)
 endif
 
-#---------------------------------------------------------------
-# build dependancies, clean rule
+#####################################################  build dependancies, clean rule
 
 inc : $(COMMON_INC) $(INSTALL_INC)
 
@@ -214,8 +205,7 @@ db_clean :
 
 realclean: clean
 
-#---------------------------------------------------------------
-# Dependency files
+##################################################### Dependency files
 
 %Record.h$(DEP): $(COMMON_DIR)/%Record.dbd
 	@$(RM) $@
@@ -266,19 +256,19 @@ menu%.h$(DEP): ../menu%.dbd
 	@$(DBEXPAND) -D $(DBDFLAGS) -o $(COMMONDEP_TARGET) $($*_DBD) > $@
 	@echo "$(COMMONDEP_TARGET): ../Makefile" >> $@
 
-%.db$(DEP): %$(SUBST_SUFFIX)
+%.db$(RAW)$(DEP): %$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(DEP): ../%$(SUBST_SUFFIX)
+%.db$(RAW)$(DEP): ../%$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(DEP): %$(TEMPL_SUFFIX)
+%.db$(RAW)$(DEP): %.template
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
-%.db$(DEP): ../%$(TEMPL_SUFFIX)
+%.db$(RAW)$(DEP): ../%.template
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
@@ -292,8 +282,14 @@ menu%.h$(DEP): ../menu%.dbd
 
 .PRECIOUS: %$(DEP)
 
-#---------------------------------------------------------------
-# Substitution files
+##################################################### CapFast filter
+
+$(COMMON_DIR)/%.edf: ../%.sch $(DEPSCHS) 
+	@$(RM) $@
+	@if [ ! -f cad.rc -a -r ../cad.rc ] ; then ln -s ../cad.rc ; fi
+	$(SCH2EDIF) $(SCH2EDIF_SYSFLAGS) $(SCH2EDIF_FLAGS) -o $@  $<
+
+##################################################### Substitution files
 
 #  WARNING: CREATESUBSTITUTIONS script needs output dir on command line
 
@@ -314,21 +310,25 @@ $(INSTALL_DB)/%$(SUBST_SUFFIX): ../%$(SUBST_SUFFIX)
 
 .PRECIOUS: $(COMMON_DIR)/%$(SUBST_SUFFIX)
 
-#---------------------------------------------------------------
-# Template files
+##################################################### Template files
 
-$(INSTALL_DB)/%$(TEMPL_SUFFIX): %$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.template: $(COMMON_DIR)/%.edf 
+	@$(RM) $@
+	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $@.VAR $<
+	@$(REPLACEVAR) < $@.VAR > $@
+	@$(RM) $@.VAR
+
+$(INSTALL_DB)/%.template: %.template
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-$(INSTALL_DB)/%$(TEMPL_SUFFIX): ../%$(TEMPL_SUFFIX)
+$(INSTALL_DB)/%.template: ../%.template
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-.PRECIOUS: $(COMMON_DIR)/%$(TEMPL_SUFFIX)
+.PRECIOUS: $(COMMON_DIR)/%.template
 
-#---------------------------------------------------------------
-# INC files
+##################################################### INC files
 
 $(COMMON_DIR)/%Record.h: $(COMMON_DIR)/%Record.dbd
 	@$(RM) $(notdir $@)
@@ -362,8 +362,7 @@ $(COMMON_DIR)/menu%.h: ../menu%.dbd
 
 .PRECIOUS: $(COMMON_DIR)/%.h
 
-#---------------------------------------------------------------
-# DBD files
+##################################################### DBD files
 
 $(COMMON_DIR)/bpt%.dbd: bpt%.data
 	@$(RM) $(notdir $@)
@@ -426,64 +425,56 @@ $(foreach file, $(DBD_INSTALLS), $(eval $(call DBD_INSTALLS_template, $(file))))
 
 .PRECIOUS: $(COMMON_DBDS) $(COMMON_DIR)/%.dbd
 
-#---------------------------------------------------------------
-# HTML files
+##################################################### HTML files
 
-$(COMMON_DIR)/%.html: %.dbd.pod
+$(COMMON_DIR)/%.html: %.dbd.pod $(TOOLS)/dbdToHtml.pl
 	@$(RM) $(notdir $@)
-	$(DBDTOHTML) $(DBDFLAGS) -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/dbdToHtml.pl $(DBDFLAGS) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: %.pod
+$(COMMON_DIR)/%.html: %.pod $(TOOLS)/podToHtml.pl
 	@$(RM) $(notdir $@)
-	$(PODTOHTML) -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: %.pm
+$(COMMON_DIR)/%.html: %.pm $(TOOLS)/podToHtml.pl
 	@$(RM) $(notdir $@)
-	$(PODTOHTML) -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: ../%.pm
+$(COMMON_DIR)/%.html: ../%.pm $(TOOLS)/podToHtml.pl
 	@$(RM) $(notdir $@)
-	$(PODTOHTML) -s -o $(notdir $@) $<
-	@$(MKDIR) $(dir $@)
-	@$(MV) $(notdir $@) $@
-
-$(COMMON_DIR)/%.html: ../%.pl
-	@$(RM) $(notdir $@)
-	$(PODTOHTML) -s -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
 .PRECIOUS: $(COMMON_DIR)/%.html %.html
 
-#---------------------------------------------------------------
-# DB files
+##################################################### DB files
 
-$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.edf 
+$(COMMON_DIR)/%.db$(RAW): $(COMMON_DIR)/%.edf 
 	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $*.VAR $<
 	@$(REPLACEVAR) < $*.VAR > $@
 	@$(RM) $*.VAR
 
-$(COMMON_DIR)/%.db: %$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): %$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: ../%$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): ../%$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: %$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): %.template
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: ../%$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): ../%.template
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
@@ -501,6 +492,22 @@ $(COMMON_DIR)/%.acf: ../%.acs
 
 .PRECIOUS: $(COMMON_DIR)/%.acf
 
+# dbst based database optimization
+ifeq '$(DB_OPT)' 'YES'
+
+$(COMMON_DIR)/%.db$(RAW): ../%.db
+	@$(RM) $@
+	$(CP) $< $@
+
+$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.db$(RAW)
+	$(ECHO) "Optimizing database $@"
+	@$(RM) $@
+	$(DBST) . $< -d > $@
+
+.PRECIOUS: $(COMMON_DIR)/%.db
+.PRECIOUS: $(DB:%=$(COMMON_DIR)/%$(RAW))
+else
+
 $(INSTALL_DB)/%: %
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -508,6 +515,7 @@ $(INSTALL_DB)/%: %
 $(INSTALL_DB)/%: ../%
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
+endif
 
 $(INSTALL_DB)/%.db: $(COMMON_DIR)/%.db
 	$(ECHO) "Installing created db file $@"
@@ -523,8 +531,8 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 .PRECIOUS: $(COMMON_DIR)/%.edf
 .PRECIOUS: $(COMMON_DBS)
 
-#---------------------------------------------------------------
-# register record,device,driver support
+##################################################### register record,device,driver support
+
 
 %_registerRecordDeviceDriver.cpp: $(COMMON_DIR)/%.dbd
 	@$(RM) $@
@@ -540,3 +548,4 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 
 .PRECIOUS: %_registerRecordDeviceDriver.cpp
 
+##################################################### END OF FILE

configure/RULES.ioc

@@ -4,10 +4,9 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
-
-# RULES.ioc
+#RULES.ioc
 
 include $(CONFIG)/RULES_DIRS
 

configure/RULES_ARCHS

@@ -90,4 +90,6 @@ realclean:
 .PHONY : $(BUILD_ARCHS) rebuild archsCommonClean
 .PHONY : $(ACTIONS) clean realclean archclean host all
 
-include $(CONFIG)/RULES_COMMON
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_BUILD

@@ -6,12 +6,11 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
-
-# RULES_BUILD
-
-# Rules for making things specified in a Makefile
 #
-# CWD is O.$(T_A), but most sources are elsewhere
+#	Rules for making things specified in Makefile
+#
+#	we are in O.$(T_A), but most sources are elsewhere
+#
 
 ifndef BASE_RULES_BUILD
 BASE_RULES_BUILD=1
@@ -43,7 +42,6 @@ LOADABLE_LIBRARY += $(LOADABLE_LIBRARY_HOST)
 OBJS += $(OBJS_HOST)
 PROD += $(PROD_HOST)
 SCRIPTS += $(SCRIPTS_HOST)
-TARGETS += $(TARGETS_HOST)
 TESTLIBRARY += $(TESTLIBRARY_HOST)
 TESTSCRIPTS += $(TESTSCRIPTS_HOST)
 TESTPROD += $(TESTPROD_HOST)
@@ -55,7 +53,6 @@ LOADABLE_LIBRARY += $(LOADABLE_LIBRARY_IOC)
 OBJS += $(OBJS_IOC)
 PROD += $(PROD_IOC)
 SCRIPTS += $(SCRIPTS_IOC)
-TARGETS += $(TARGETS_IOC)
 TESTLIBRARY += $(TESTLIBRARY_IOC)
 TESTSCRIPTS += $(TESTSCRIPTS_IOC)
 TESTPROD += $(TESTPROD_IOC)
@@ -82,9 +79,9 @@ else
 host:
 endif
 
-include $(CONFIG)/RULES_FILE_TYPE
+-include $(CONFIG)/RULES_FILE_TYPE
 
-include $(CONFIG)/RULES.Db
+-include $(CONFIG)/RULES.Db
 
 #---------------------------------------------------------------
 # Include defines and rules for prod, library and test* targets
@@ -188,7 +185,7 @@ endif
 
 # RELEASE file consistency checking
 checkRelease:
-	+$(CONVERTRELEASE) checkRelease
+	$(CONVERTRELEASE) checkRelease
 warnRelease:
 	-$(CONVERTRELEASE) checkRelease
 noCheckRelease:
@@ -202,9 +199,9 @@ endif
 
 $(TESTPRODNAME) $(PRODNAME): $(PRODUCT_OBJS) $(PROD_RESS) $(PROD_DEPLIBS)
 
-$(TESTPRODNAME) $(PRODNAME): %$(EXE): | $(INSTALL_LIB)
+$(TESTPRODNAME) $(PRODNAME): %$(EXE):
 	@$(RM) $@
-	$(LINK.cpp)
+	$(DEBUGCMD) $(LINK.cpp)
 	$(MT_EXE_COMMAND)
 
 %_ctdt$(OBJ) : %_ctdt.c
@@ -305,10 +302,6 @@ $(LOADABLE_SHRLIBNAME): $(LOADABLE_SHRLIB_PREFIX)%$(LOADABLE_SHRLIB_SUFFIX):
 	$(LINK.shrlib)
 	$(MT_DLL_COMMAND)
 
-$(LIBNAME) $(SHRLIBNAME) $(LOADABLE_SHRLIBNAME): | $(INSTALL_LIB)
-$(INSTALL_LIB):
-	@$(MKDIR) $@
-
 #---------------------------------------------------------------
 # C++ munching for VxWorks
 
@@ -339,12 +332,6 @@ $(MODNAME): %$(MODEXT): %$(EXE)
 	@$(RM) $@
 	$(LINK.mod)
 
-#---------------------------------------------------------------
-# Generate Perl include path module
-%ModuleDirs.pm: $(wildcard $(TOP)/configure/RELEASE*)
-	@$(MKDIR) $(dir $@)
-	$(CONVERTRELEASE) -T $(TOP) $@
-
 #---------------------------------------------------------------
 # Automated testing
 
@@ -364,7 +351,7 @@ testspec: $(TESTSCRIPTS)
 test-results: tapfiles
 ifneq ($(TAPFILES),)
 ifdef RUNTESTS_ENABLED
-	prove --failures --ext .tap --exec "$(CAT)" --color $(TAPFILES)
+	$(PROVE) --failures --ext .tap --exec "$(CAT)" --color $(TAPFILES)
 endif
 
 CURRENT_TAPFILES := $(wildcard $(TAPFILES))
@@ -394,21 +381,13 @@ endif
 # If there's a perl test script (.plt) available, use it
 %.t: ../%.plt
 	@$(RM) $@
-	$(EXPAND_TOOL) -t $(INSTALL_LOCATION) -a $(T_A) $< $@
+	$(CP) $< $@
 
 # Test programs (.t files) must be written in Perl.
 # Generate a perl program to exec the real test binary.
 %.t: %$(EXE) $(TOOLS)/makeTestfile.pl
 	@$(RM) $@
-	$(PERL) $(TOOLS)/makeTestfile.pl $(T_A) $(EPICS_HOST_ARCH) $@ $<
-
-#---------------------------------------------------------------
-# Generate header with version number from VCS
-
-ifneq ($(GENVERSION),)
-$(COMMON_DIR)/$(GENVERSION): FORCE
-	$(GENVERSIONHEADER) -t $(TOP) -N $(GENVERSIONMACRO) -V "$(GENVERSIONDEFAULT)" $@
-endif
+	$(PERL) $(TOOLS)/makeTestfile.pl $@ $<
 
 #---------------------------------------------------------------
 # Install rules for BIN_INSTALLS and LIB_INSTALLS
@@ -471,11 +450,9 @@ $(INSTALL_TCLLIB)/%: ../%
 	@$(INSTALL) -d -m $(BIN_PERMISSIONS) $< $(INSTALL_TCLLIB)
 endif
 
-ifneq ($(TCLINDEX),)
 $(INSTALL_TCLLIB)/$(TCLINDEX): $(INSTALL_TCLLIBS)
 	$(ECHO) "Updating $@"
 	$(ECHO) eval auto_mkindex $(INSTALL_TCLLIB) "$(TCLLIBNAME)" | tclsh
-endif
 
 $(INSTALL_LOADABLE_SHRLIBS): $(INSTALL_SHRLIB)/%: %
 	$(ECHO) "Installing loadable shared library $@"
@@ -487,7 +464,6 @@ ifneq (,$(strip $(LOADABLE_SHRLIB_VERSION)))
 endif # LOADABLE_SHRLIB_VERSION
 endif # LOADABLE_SHRLIB_SUFFIX
 
-ifneq ($(INSTALL_CONFIGS),)
 $(INSTALL_CONFIG)/%: %
 	$(ECHO) "Installing config file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -495,7 +471,6 @@ $(INSTALL_CONFIG)/%: %
 $(INSTALL_CONFIG)/%: ../%
 	$(ECHO) "Installing config file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
-endif
 
 $(INSTALL_INCLUDE)/% : $(COMMON_DIR)/%
 	$(ECHO) "Installing generated generic include file $@"
@@ -541,18 +516,14 @@ $(INSTALL_TEMPLATES_SUBDIR)/%: %
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-include $(CONFIG)/RULES_EXPAND
+-include $(CONFIG)/RULES_EXPAND
 
 .PRECIOUS: %.i %.o %.c %.nm %.cpp %.cc
 .PRECIOUS: $(COMMON_INC)
 
 .PHONY: all host inc build install clean rebuild buildInstall build_clean
 .PHONY: runtests tapfiles clean-tests test-results junitfiles
-.PHONY: checkRelease warnRelease noCheckRelease FORCE
+.PHONY: checkRelease warnRelease noCheckRelease
 
-include $(CONFIG)/RULES_COMMON
-
-else
-    $(warning RULES_BUILD included more than once. \
-        Use 'make show-makefiles' to work out why.)
 endif # BASE_RULES_BUILD
+#	EOF RULES_BUILD

configure/RULES_COMMON

@@ -1,35 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2018 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# These rules show the set of Makefiles, config files and
-# rules files loaded by GNUmake.
-
-# Protect against filenames containing colons (Windows)
-SAFE_MAKEFILES = $(subst :,__colon__,$(MAKEFILE_LIST))
-SHOW_MAKEFILES = $(SAFE_MAKEFILES:%=show-makefile.%)
-show-makefiles: $(SHOW_MAKEFILES)
-
-# The sort prevents warnings about duplicate targets:
-$(sort $(SHOW_MAKEFILES)): show-makefile.%:
-	@echo "    $(subst __colon__,:,$(@:show-makefile.%=%))"
-
-.PHONY: show-makefiles show-makefile.%
-
-# These rules support printing a Makefile variable values.
-# Many variables are only set inside an O.<arch> build directory.
-#   make PRINT.T_A
-
-PRINT_Var = $(@:PRINT.%=%)
-PRINT.%:
-	@echo $(PRINT_Var) = '$($(PRINT_Var))'
-
-.PHONY: PRINT PRINT.%
-
-
-#  User specific rules
-#
--include $(HOME)/configure/RULES_USER

configure/RULES_DIRS

@@ -92,4 +92,7 @@ $(ARCHS) $(ACTIONS) $(actionArchTargets) :%: \
 .PHONY : $(dirActionArchTargets)
 .PHONY : $(actionArchTargets)
 
-include $(CONFIG)/RULES_COMMON
+
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_EXPAND

@@ -1,13 +1,4 @@
-#*************************************************************************
-# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# Copyright (c) 2002 The Regents of the University of California, as
-#     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# RULES_EXPAND
+# <top>/configure/RULES_EXPAND
 
 vpath %@ $(USR_VPATH) $(ALL_SRC_DIRS)
 

configure/RULES_FILE_TYPE

@@ -7,11 +7,9 @@
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
 
-# Include <top>/configure/RULES_BUILD from tops defined in RELEASE* files,
-# excluding EPICS_BASE
+# Include <top>/configure/RULES_BUILD from tops defined in RELEASE* files
 #
-RELEASE_RULES_BUILDS = $(foreach top, \
-    $(filter-out EPICS_BASE, $(RELEASE_TOPS)), \
+RELEASE_RULES_BUILDS = $(foreach top, $(RELEASE_TOPS), \
     $(wildcard $($(top))/configure/RULES_BUILD))
 ifneq ($(RELEASE_RULES_BUILDS),)
   include $(RELEASE_RULES_BUILDS)
@@ -25,7 +23,7 @@ ifneq ($(RELEASE_CFG_RULES),)
   include $(RELEASE_CFG_RULES)
 endif
 
-# If this is not BASE then include <top>/configure/RULES_BUILD
+# If this is not BASE then include <TOP>/configure/RULES_BUILD
 #
 ifeq ($(wildcard $(TOP)/configure/CONFIG_BASE_VERSION),)
 TOP_RULES_BUILDS = $(wildcard $(TOP)/configure/RULES_BUILD)
@@ -69,3 +67,7 @@ file_type_clean:
 	@$(RM) $(foreach type, $(FILE_TYPE), $($(type)))
 
 .PHONY : file_type_clean
+
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_OCTAVE

@@ -1,10 +1,11 @@
 #*************************************************************************
-# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 # Octave definitions and rules

configure/RULES_TARGET

@@ -1,13 +1,18 @@
 #*************************************************************************
-# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
-
-# RULES_TARGET
+#
+#  RULES_TARGET
+#
+#  This file is to be maintained by the community.
+#
+#-----------------------------------------------------------------------
 
 define TARGET_template
 $(1)_$(2) += $$(if $$(strip $$($(1)_$(2)_$$(OS_CLASS))), \
@@ -15,7 +20,7 @@ $(1)_$(2) += $$(if $$(strip $$($(1)_$(2)_$$(OS_CLASS))), \
              $$($(1)_$(2)_DEFAULT))
 endef
 
-$(foreach type, SRCS RCS OBJS LDFLAGS LDOBJS SYS_LIBS , \
+$(foreach type, SRCS RCS OBJS LDFLAGS OBJLIBS LDOBJS SYS_LIBS , \
 $(foreach target, $(PROD) $(TESTPROD) $(LIBRARY) $(TESTLIBRARY) $(LOADABLE_LIBRARY) , \
     $(eval $(call TARGET_template,$(strip $(target)),$(type)))))
 
@@ -147,3 +152,4 @@ $(foreach target, $(LOADABLE_LIBRARY), \
     $(eval $(call LOADABLE_LIBRARY_template,$(strip $(target)))))
 
 #-----------------------------------------------------------------------
+

configure/RULES_TOP

@@ -15,19 +15,12 @@ CVSCLEAN = $(call FIND_TOOL,cvsclean.pl)
 cvsclean:
 	$(PERL) $(CVSCLEAN)
 
-DEPCLEAN = $(call FIND_TOOL,depclean.pl)
-depclean:
-	$(PERL) $(DEPCLEAN)
-
 realuninstall: uninstallDirs
 	$(RMDIR) $(INSTALL_LOCATION_BIN)
 	$(RMDIR) $(INSTALL_LOCATION_LIB)
 
 UNINSTALL_DIRS += $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC) \
     $(INSTALL_HTML) $(INSTALL_TEMPLATES) $(INSTALL_DB) $(DIRECTORY_TARGETS)
-ifneq ($(INSTALL_LOCATION),$(TOP))
-UNINSTALL_DIRS += $(INSTALL_CONFIG)
-endif
 uninstallDirs:
 	$(RMDIR) $(UNINSTALL_DIRS)
 
@@ -77,14 +70,12 @@ help:
 	@echo "     uninstall      - Remove install directories created by this hostarch."
 	@echo "     realuninstall  - Removes ALL install dirs"
 	@echo "     distclean      - Same as realclean cvsclean realuninstall."
-	@echo "     depclean       - Removes all .d files from O.<arch> directories."
 	@echo "     cvsclean       - Removes cvs .#* files in all dirs of directory tree"
 	@echo "     help           - Prints this list of valid make targets "
 	@echo "Indiv. object targets are supported by O.<arch> level Makefile .e.g"
 	@echo "     xxxRecord.o"
 
-.PHONY: cleandirs distclean cvsclean depclean
-.PHONY: realuninstall archuninstall uninstallDirs
+.PHONY: cleandirs distclean cvsclean realuninstall archuninstall uninstallDirs
 .PHONY: uninstall help
 
 # Include <top>/cfg/TOP_RULES* files from tops defined in RELEASE* files

configure/os/CONFIG.Common.RTEMS

@@ -27,13 +27,9 @@ ifneq ($(CONFIG),$(TOP)/configure)
 -include $(TOP)/configure/CONFIG_SITE.Common.RTEMS
 endif
 
-#--------------------------------------------------
-# Set RTEMS_BSP from T_A if not already done
-RTEMS_BSP ?= $(subst RTEMS-,,$(T_A))
-
 #-------------------------------------------------------
 # Pick up the RTEMS tool/path definitions from the RTEMS BSP directory.
-include $(RTEMS_BASE)/$(RTEMS_TARGET_CPU)-rtems$(RTEMS_VERSION)/$(RTEMS_BSP)/Makefile.inc
+include $(RTEMS_BASE)/$(RTEMS_TARGET_CPU)-rtems$(RTEMS_VERSION)/$(subst RTEMS-,,$(T_A))/Makefile.inc
 include $(RTEMS_CUSTOM)
 include $(CONFIG.CC)
 

configure/os/CONFIG.Common.RTEMS-at91rm9200ek

@@ -9,6 +9,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = at91rm9200ek
-RTEMS_TARGET_CPU = arm
+RTEMS_TARGET_CPU=arm
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-beatnik

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = beatnik
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-gen68360

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = gen68360
-RTEMS_TARGET_CPU = m68k
+RTEMS_TARGET_CPU=m68k
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mcp750

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = mcp750
-RTEMS_TARGET_CPU = ppc
+RTEMS_TARGET_CPU=ppc
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mvme167

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = mvme167
-RTEMS_TARGET_CPU = m68k
+RTEMS_TARGET_CPU=m68k
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mvme2100

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = mvme2100
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-mvme2700

@@ -1,7 +1,6 @@
 #
 # Author: Matt Rippa
 #
-RTEMS_BSP = mvme2700
 RTEMS_TARGET_CPU = powerpc
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_PPCBUG

configure/os/CONFIG.Common.RTEMS-mvme3100

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = mvme3100
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-mvme5500

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = mvme5500
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-pc386

@@ -5,15 +5,14 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = pc386
-RTEMS_TARGET_CPU = i386
+RTEMS_TARGET_CPU=i386
 
 MUNCH_SUFFIX = .boot
 define MUNCH_CMD
-	$(RM) $*.bin
-	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< $*.bin
+	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< temp.bin
 	$(BIN2BOOT) $@ 0x00097E00 \
-	    $(PROJECT_RELEASE)/lib/start16.bin 0x00097C00 0 $*.bin 0x00100000 0
+		$(PROJECT_RELEASE)/lib/start16.bin 0x00097C00 0 temp.bin 0x00100000 0
+	rm -f temp.bin
 endef
 
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-pc386-qemu

@@ -1,11 +0,0 @@
-# CONFIG.Common.RTEMS-pc386-qemu
-#
-# Definitions for the RTEMS-pc386-qemu target
-# Site-specific overrides go in CONFIG_SITE.Common.RTEMS-pc386-qemu
-#
-#-------------------------------------------------------
-
-# Include definitions from RTEMS-pc386
-include $(CONFIG)/os/CONFIG.Common.RTEMS-pc386
-
-RTEMS_QEMU_FIXUPS = YES

configure/os/CONFIG.Common.RTEMS-psim

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = psim
-RTEMS_TARGET_CPU = ppc
+RTEMS_TARGET_CPU=ppc
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-uC5282

@@ -5,7 +5,6 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = uC5282
 RTEMS_TARGET_CPU = m68k
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 

configure/os/CONFIG.Common.vxWorksCommon

@@ -1,7 +1,7 @@
 # CONFIG.Common.vxWorksCommon
 #
 # Definitions for vxWorks target archs
-# Override these definitions in CONFIG_SITE.Common.vxWorksCommon
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorksCommon
 # or CONFIG_SITE.<host>.vxWorksCommon
 #-------------------------------------------------------
 
@@ -63,6 +63,8 @@ VXWORKS_MAJOR_VERSION = $(basename $(basename $(VXWORKS_VERSION)))
 
 # These are needed for vxWorks 6.x; the GNU toolset version number
 # is in the path to the compiler tools:
+VX_GNU_VERSION_5.4 = 2.95
+VX_GNU_VERSION_5.5 = 2.96
 VX_GNU_VERSION_6.0 = 3.3.2
 VX_GNU_VERSION_6.1 = 3.3.2
 VX_GNU_VERSION_6.2 = 3.3.2
@@ -78,21 +80,30 @@ VX_GNU_VERSION = $(VX_GNU_VERSION_$(VXWORKS_VERSION))
 VX_GNU_MAJOR_VERSION = $(basename $(basename $(VX_GNU_VERSION)))
 
 #--------------------------------------------------
-# Fix old Linux WIND_HOST_TYPE
+# Fix WIND_BASE for vxWorks 6.x on linux
+# NB: We know the value of WIND_HOST_TYPE here, but not VXWORKS_VERSION
 ifeq ($(WIND_HOST_TYPE),x86-linux)
-  WIND_HOST_TYPE = x86-linux2
+  WIND_HOST_TYPE_5 = x86-linux
+  WIND_HOST_TYPE_6 = x86-linux2
+  WIND_HOST_TYPE = $(WIND_HOST_TYPE_$(VXWORKS_MAJOR_VERSION))
 endif
 
 #--------------------------------------------------
 # vxWorks directory definitions
-VX_DIR = $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)
+VX_DIR_5 = $(WIND_BASE)
+VX_DIR_6 = $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)
+VX_DIR = $(VX_DIR_$(VXWORKS_MAJOR_VERSION))
 
-GNU_TARGET_INCLUDE_DIR = $(VX_DIR)/target/h $(VX_DIR)/target/h/wrn/coreip
+VX_INCLUDE_DIRS_5 = $(VX_DIR)/target/h
+VX_INCLUDE_DIRS_6 = $(VX_DIR)/target/h $(VX_DIR)/target/h/wrn/coreip
+GNU_TARGET_INCLUDE_DIR = $(VX_INCLUDE_DIRS_$(VXWORKS_MAJOR_VERSION))
 
 #--------------------------------------------------
 # vxWorks GNU directories
 
-GNU_DIR = $(WIND_BASE)/gnu/$(VX_GNU_VERSION)-vxworks-$(VXWORKS_VERSION)/$(WIND_HOST_TYPE)
+GNU_DIR_5 = $(WIND_BASE)/host/$(WIND_HOST_TYPE)
+GNU_DIR_6 = $(WIND_BASE)/gnu/$(VX_GNU_VERSION)-vxworks-$(VXWORKS_VERSION)/$(WIND_HOST_TYPE)
+GNU_DIR = $(GNU_DIR_$(VXWORKS_MAJOR_VERSION))
 
 #--------------------------------------------------
 # This finds nm on any supported VxWorks version
@@ -102,7 +113,9 @@ NM = $(firstword $(wildcard $(WIND_BASE)/*/$(WIND_HOST_TYPE)/bin/$(NMPROG)))
 
 #--------------------------------------------------
 # A linker script is essential for munching from vxWorks 6.6 onwards
-# (i.e. with versions that use gcc 4.1.2 or later).
+# (i.e. with versions that use gcc 4.1.2 or later).  It can be used
+# with any vxWorks 5 or 6 version, but apparently should not be used
+# when compiling for 68K (which isn't supported in vxWorks 6 anyway)
 MUNCH_LDFLAGS_6 = -T $(VX_DIR)/target/h/tool/gnu/ldscripts/link.OUT
 MUNCH_LDFLAGS = $(MUNCH_LDFLAGS_$(VXWORKS_MAJOR_VERSION))
 
@@ -118,10 +131,11 @@ export TOOL_FAMILY = GNU
 OP_SYS_CPPFLAGS += -DvxWorks=vxWorks
 OP_SYS_CFLAGS += -fno-builtin
 
-# Fix for vxWorks headers that use macros defined in vxWorks.h but
+# Fix for vxWorks 5 headers that use macros defined in vxWorks.h but
 # which don't actually include vxWorks.h themselves, for example the
 # target/h/sys/stat.h file which uses ULONG.  This also stops dbDefs.h
-# from defining the OFFSET macro, which generates lots of warnings.
+# from defining the OFFSET macro, which generates lots of warnings in
+# both vxWorks 5 and 6.
 OP_SYS_INCLUDE_CPPFLAGS += -include $(VX_DIR)/target/h/vxWorks.h
 
 #--------------------------------------------------
@@ -134,6 +148,7 @@ OPT_CXXFLAGS_YES = -O2
 CODE_CFLAGS =
 #
 # For vxWorks versions before 6.3 we need this g++ compiler flag
+CODE_CXXFLAGS_5 = -fno-implicit-templates
 CODE_CXXFLAGS_6.0 = -fno-implicit-templates
 CODE_CXXFLAGS_6.1 = -fno-implicit-templates
 CODE_CXXFLAGS_6.2 = -fno-implicit-templates
@@ -146,10 +161,8 @@ SHRLIB_CFLAGS =
 SHRLIB_LDFLAGS =
 
 #--------------------------------------------------
-# Don't use gcc 2.x for dependency generation
-
-HDEPENDS_METHOD_2 = MKMF
-HDEPENDS_METHOD = $(firstword $(HDEPENDS_METHOD_$(VX_GNU_MAJOR_VERSION)) COMP)
+# Earlier versions of gcc don't understand -MF
+HDEPENDS_COMPFLAGS = -MM > $@
 
 #--------------------------------------------------
 # osithead use default stack, YES or NO override
@@ -173,8 +186,10 @@ VXCPPFLAGS = $(filter-out $(OP_SYS_INCLUDE_CPPFLAGS),$(CPPFLAGS))
 PREPROCESS.cpp = $(CPP) $(VXCPPFLAGS) $(INCLUDES) $< > $@
 
 #--------------------------------------------------
-# Use LEDLIB for command-line editing
-COMMANDLINE_LIBRARY = LEDLIB
+# Don't use gcc 2.x for dependency generation
+
+HDEPENDS_METHOD_2 = MKMF
+HDEPENDS_METHOD = $(firstword $(HDEPENDS_METHOD_$(VX_GNU_MAJOR_VERSION)) COMP)
 
 #--------------------------------------------------
 # Allow site overrides

configure/os/CONFIG.UnixCommon.Common

@@ -8,7 +8,7 @@
 CP = cp
 MV = mv
 RM = rm -f
-MKDIR = mkdir -p
+MKDIR = mkdir
 RMDIR = rm -rf
 CAT = cat
 

configure/os/CONFIG.darwinCommon.darwinCommon

@@ -65,7 +65,7 @@ GNU = NO
 #
 # Darwin shared libraries
 #
-SHRLIB_LDFLAGS = -dynamiclib -flat_namespace -undefined dynamic_lookup \
+SHRLIB_LDFLAGS = -dynamiclib -undefined dynamic_lookup \
     -install_name $(shell $(FULLPATHNAME) $(INSTALL_LIB))/$@ \
     $(addprefix -compatibility_version , $(SHRLIB_VERSION)) \
     $(addprefix -current_version , $(SHRLIB_VERSION))

configure/os/CONFIG.linux-386.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-486.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-586.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-686.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-x86.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-x86_64.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.win32-x86.Common

@@ -26,5 +26,3 @@ endif
 # Needed to find dlls for base installed build tools (antelope,eflex,...)
 PATH := $(EPICS_BASE_BIN):$(PATH)
 
-# Silence the tr1 namespace deprecation warnings
-USR_CXXFLAGS_WIN32 += -D_SILENCE_TR1_NAMESPACE_DEPRECATION_WARNING

configure/os/CONFIG_SITE.Common.RTEMS-pc386

@@ -0,0 +1,3 @@
+#
+# Site-specific overrides for RTEMS-pc386 target
+#

configure/os/CONFIG_SITE.Common.RTEMS-pc386-qemu

@@ -1,9 +0,0 @@
-# CONFIG_SITE.Common.RTEMS-pc386-qemu
-#
-# Site-specific overrides for the RTEMS-pc386-qemu target
-#
-
-# If you're building this architecture you _probably_ want to
-# run the tests for it under QEMU, but if not you can turn
-# them off here by commenting out this line:
-CROSS_COMPILER_RUNTEST_ARCHS += RTEMS-pc386-qemu

configure/os/CONFIG_SITE.Common.linux-arm

@@ -1,39 +1,35 @@
 # CONFIG_SITE.Common.linux-arm
 #
-# Site Specific definitions for all linux-arm targets
-#-------------------------------------------------------
+# Site-specific settings for the linux-arm target
 
-# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
+# NOTE: In most cases if SHARED_LIBRARIES is set to YES the
 # shared libraries will be found automatically.  However if the .so
 # files are installed at a different path to their compile-time path
 # then in order to be found at runtime do one of these:
 # a) LD_LIBRARY_PATH must include the full absolute pathname to
 #    $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) when invoking base
 #    executables.
-# b) Add the runtime path to SHRLIB_DEPLIB_DIRS and PROD_DEPLIB_DIRS, which 
+# b) Add the runtime path to SHRLIB_DEPLIB_DIRS and PROD_DEPLIB_DIRS, which
 #    will add the named directory to the list contained in the executables.
 # c) Add the runtime path to /etc/ld.so.conf and run ldconfig
 #    to inform the system of the shared library location.
 
-# Depending on your version of Linux you'll want one of the following
-# lines to enable command-line editing and history in iocsh.  If you're
-# not sure which, start with the top one and work downwards until the
-# build doesn't fail to link the readline library.  If none of them work,
-# comment them all out to build without readline support.
 
-# No other libraries needed (recent Fedora, Ubuntu etc.):
-#COMMANDLINE_LIBRARY = READLINE
+# Use GNU Readline if the header file is installed
+COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
+    $(firstword $(READLINE_DIR) $(GNU_DIR))/include/readline/readline.h), \
+  READLINE, EPICS))
 
-# Needs -lncurses (RHEL 5 etc.):
+# If libreadline needs additional libraries to be linked with it, try
+# uncommenting each of the lines below in turn, starting with the top
+# one and working downwards, until the build succeeds. Do a 'make rebuild'
+# from the top of the Base tree after changing this setting.
+
+# Needs -lncurses:
 #COMMANDLINE_LIBRARY = READLINE_NCURSES
 
-# Needs -lcurses (older versions)
+# Needs -lcurses:
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
-
-# It makes sense to include debugging symbols even in optimized builds
-# in case you want to attach gdb to the process or examine a core-dump.
-# This does cost disk space, but not memory as debug symbols are not
-# loaded into RAM when the binary is loaded.
-OPT_CFLAGS_YES += -g
-OPT_CXXFLAGS_YES += -g
+# Readline is broken or you don't want use it:
+#COMMANDLINE_LIBRARY = EPICS

configure/os/CONFIG_SITE.Common.linux-cris

@@ -1,9 +1,8 @@
 # CONFIG_SITE.Common.linux-cris
 #
-# Site Specific definitions for linux-cris target
-# Only the local epics system manager should modify this file
+# Site-specific settings for the linux-cris target
 
-# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
+# NOTE: In most cases if SHARED_LIBRARIES is set to YES the
 # shared libraries will be found automatically.  However if the .so
 # files are installed at a different path to their compile-time path
 # then in order to be found at runtime do one of these:
@@ -15,21 +14,21 @@
 # c) Add the runtime path to /etc/ld.so.conf and run ldconfig
 #    to inform the system of the shared library location.
 
-# Depending on your version of Linux you may want one of the following
-# lines to enable command-line editing and history in iocsh.  If you're
-# not sure which, start with the top one and work downwards until the
-# build doesn't fail to link the readline library.  If none of them work,
-# comment them all out to build without readline support.
 
-# No other libraries needed (recent Fedora, Ubuntu etc.):
-#COMMANDLINE_LIBRARY = READLINE
+# Use GNU Readline if the header file is installed
+COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
+    $(GNU_DIR)/include/readline/readline.h), READLINE, EPICS))
 
-# Needs -lncurses (RHEL 5 etc.):
+# If libreadline needs additional libraries to be linked with it, try
+# uncommenting each of the lines below in turn, starting with the top
+# one and working downwards, until the build succeeds. Do a 'make rebuild'
+# from the top of the Base tree after changing this setting.
+
+# Needs -lncurses:
 #COMMANDLINE_LIBRARY = READLINE_NCURSES
 
-# Needs -lcurses (older versions)
+# Needs -lcurses:
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
-
-OP_SYS_CFLAGS += -g
-
+# Readline is broken or you don't want use it:
+#COMMANDLINE_LIBRARY = EPICS

configure/os/CONFIG_SITE.Common.linux-microblaze

@@ -1,7 +1,6 @@
 # CONFIG_SITE.Common.linux-microblaze
 #
-# Site specific definitions for linux-microblaze target builds.
-#-------------------------------------------------------
+# Site-specific settings for the linux-microblaze target
 
 # The gnu tools for cross compiling for MicroBlaze (little endian)
 # on Linux can be downloaded from the Xilinx git server:
@@ -12,3 +11,21 @@
 
 GNU_DIR = /usr/local/vw/microblaze-2.0/microblazeel-unknown-linux-gnu
 
+
+# Use GNU Readline if the header file is installed
+COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
+    $(GNU_DIR)/include/readline/readline.h), READLINE, EPICS))
+
+# If libreadline needs additional libraries to be linked with it, try
+# uncommenting each of the lines below in turn, starting with the top
+# one and working downwards, until the build succeeds. Do a 'make rebuild'
+# from the top of the Base tree after changing this setting.
+
+# Needs -lncurses:
+#COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+# Needs -lcurses:
+#COMMANDLINE_LIBRARY = READLINE_CURSES
+
+# Readline is broken or you don't want use it:
+#COMMANDLINE_LIBRARY = EPICS

configure/os/CONFIG_SITE.Common.linux-x86

@@ -1,9 +1,8 @@
 # CONFIG_SITE.Common.linux-x86
 #
-# Site Specific definitions for linux-x86 target
-# Only the local epics system manager should modify this file
+# Site-specific settings for the linux-x86 target
 
-# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
+# NOTE: In most cases if SHARED_LIBRARIES is set to YES the
 # shared libraries will be found automatically.  However if the .so
 # files are installed at a different path to their compile-time path
 # then in order to be found at runtime do one of these:
@@ -15,14 +14,15 @@
 # c) Add the runtime path to /etc/ld.so.conf and run ldconfig
 #    to inform the system of the shared library location.
 
-# Depending on your version of Linux you'll want one of the following
-# lines to enable command-line editing and history in iocsh.  If you're
-# not sure which, start with the top one and work downwards until the
-# build doesn't fail to link the readline library.  If none of them work,
-# comment them all out to build without readline support.
 
-# No other libraries needed (recent Fedora, Ubuntu etc.):
-COMMANDLINE_LIBRARY = READLINE
+# Use GNU Readline if the header file is installed
+COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
+    $(GNU_DIR)/include/readline/readline.h), READLINE, EPICS))
+
+# If libreadline needs additional libraries to be linked with it, try
+# uncommenting each of the lines below in turn, starting with the top
+# one and working downwards, until the build succeeds. Do a 'make rebuild'
+# from the top of the Base tree after changing this setting.
 
 # Needs -lncurses (RHEL 5 etc.):
 #COMMANDLINE_LIBRARY = READLINE_NCURSES
@@ -30,6 +30,9 @@ COMMANDLINE_LIBRARY = READLINE
 # Needs -lcurses (older versions)
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
+# Readline is broken or you don't want use it:
+#COMMANDLINE_LIBRARY = EPICS
+
 
 # Permit access to 64-bit file-systems
 OP_SYS_CFLAGS += -D_FILE_OFFSET_BITS=64
@@ -43,18 +46,6 @@ OP_SYS_CFLAGS += -D_FILE_OFFSET_BITS=64
 #CCC         = clang++
 
 
-# It makes sense to include debugging symbols even in optimized builds
-# in case you want to attach gdb to the process or examine a core-dump.
-# This does cost disk space, but not memory as debug symbols are not
-# loaded into RAM when the binary is loaded.
-OPT_CFLAGS_YES += -g
-OPT_CXXFLAGS_YES += -g
-
-
 # Tune GNU compiler output for a specific 32-bit cpu-type
 # (e.g. generic, native, i386, i686, pentium2/3/4, prescott, k6, athlon etc.)
 GNU_TUNE_CFLAGS = -mtune=generic
-
-
-# Developers using a suitable compiler may enable its address sanitizer:
-#ENABLE_ASAN = YES

configure/os/CONFIG_SITE.Common.linux-x86_64

@@ -1,9 +1,8 @@
 # CONFIG_SITE.Common.linux-x86_64
 #
-# Site Specific definitions for linux-x86_64 target
-# Only the local epics system manager should modify this file
+# Site-specific settings for the linux-x86_64 target
 
-# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
+# NOTE: In most cases if SHARED_LIBRARIES is set to YES the
 # shared libraries will be found automatically.  However if the .so
 # files are installed at a different path to their compile-time path
 # then in order to be found at runtime do one of these:
@@ -15,14 +14,15 @@
 # c) Add the runtime path to /etc/ld.so.conf and run ldconfig
 #    to inform the system of the shared library location.
 
-# Depending on your version of Linux you'll want one of the following
-# lines to enable command-line editing and history in iocsh.  If you're
-# not sure which, start with the top one and work downwards until the
-# build doesn't fail to link the readline library.  If none of them work,
-# comment them all out to build without readline support.
 
-# No other libraries needed (recent Fedora, Ubuntu etc.):
-COMMANDLINE_LIBRARY = READLINE
+# Use GNU Readline if the header file is installed
+COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
+    $(GNU_DIR)/include/readline/readline.h), READLINE, EPICS))
+
+# If libreadline needs additional libraries to be linked with it, try
+# uncommenting each of the lines below in turn, starting with the top
+# one and working downwards, until the build succeeds. Do a 'make rebuild'
+# from the top of the Base tree after changing this setting.
 
 # Needs -lncurses (RHEL 5 etc.):
 #COMMANDLINE_LIBRARY = READLINE_NCURSES
@@ -30,6 +30,9 @@ COMMANDLINE_LIBRARY = READLINE
 # Needs -lcurses (older versions)
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
+# Readline is broken or you don't want use it:
+#COMMANDLINE_LIBRARY = EPICS
+
 
 # Uncomment the followings lines to build with CLANG instead of GCC.
 #
@@ -39,18 +42,6 @@ COMMANDLINE_LIBRARY = READLINE
 #CCC         = clang++
 
 
-# It makes sense to include debugging symbols even in optimized builds
-# in case you want to attach gdb to the process or examine a core-dump.
-# This does cost disk space, but not memory as debug symbols are not
-# loaded into RAM when the binary is loaded.
-OPT_CFLAGS_YES += -g
-OPT_CXXFLAGS_YES += -g
-
-
 # Tune GNU compiler output for a specific 64-bit cpu-type
 # (e.g. generic, native, core2, nocona, k8, opteron, athlon64, barcelona etc.)
 GNU_TUNE_CFLAGS = -mtune=generic
-
-
-# Developers using a suitable compiler may enable its address sanitizer:
-#ENABLE_ASAN = YES

configure/os/CONFIG_SITE.Common.linux-xscale_be

@@ -1,4 +1,23 @@
 # CONFIG_SITE.Common.linux-xscale_be
 #
-# Site specific definitions for all linux-xscale_be target builds.
-#-------------------------------------------------------
+# Site-specific settings for the linux-xscale_be target
+
+
+# Use GNU Readline if the header file is installed
+COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
+    $(firstword $(READLINE_DIR) $(GNU_DIR))/include/readline/readline.h), \
+  READLINE, EPICS))
+
+# If libreadline needs additional libraries to be linked with it, try
+# uncommenting each of the lines below in turn, starting with the top
+# one and working downwards, until the build succeeds. Do a 'make rebuild'
+# from the top of the Base tree after changing this setting.
+
+# Needs -lncurses:
+#COMMANDLINE_LIBRARY = READLINE_NCURSES
+
+# Needs -lcurses:
+#COMMANDLINE_LIBRARY = READLINE_CURSES
+
+# Readline is broken or you don't want use it:
+#COMMANDLINE_LIBRARY = EPICS

configure/os/CONFIG_SITE.Common.linuxCommon

@@ -0,0 +1,11 @@
+# CONFIG_SITE.Common.linuxCommon
+#
+# Site-specific settings for all linux targets
+
+
+# It makes sense to include debugging symbols even in optimized builds
+# in case you want to attach gdb to the process or examine a core-dump.
+# This does cost disk space, but not memory as debug symbols are not
+# loaded into RAM when the binary is loaded.
+OPT_CFLAGS_YES += -g
+OPT_CXXFLAGS_YES += -g

configure/os/CONFIG_SITE.Common.vxWorksCommon

@@ -1,13 +1,21 @@
 # CONFIG_SITE.Common.vxWorksCommon
 #
 # Site specific definitions for vxWorks target builds.
+# Only the local epics system manager should modify this file
 
 # Compiler options can vary with the vxWorks version number, so we
-# need to know that.  Do not include any third-level digits.
+# need to know that.  However don't include any third-level digits
+# (e.g. the .2 in 5.5.2) because we don't need them.
 
-# Note: vxWorks 5.4.x and 5.5.x (Tornado 2.x) are not supported.
-# VxWorks 6.0 through 6.5 use older, untested versions of GCC.
+# Note: vxWorks 5.4.x (Tornado 2.0.x) is not supported
 
+#VXWORKS_VERSION = 5.5
+#VXWORKS_VERSION = 6.0
+#VXWORKS_VERSION = 6.1
+#VXWORKS_VERSION = 6.2
+#VXWORKS_VERSION = 6.3
+#VXWORKS_VERSION = 6.4
+#VXWORKS_VERSION = 6.5
 #VXWORKS_VERSION = 6.6
 #VXWORKS_VERSION = 6.7
 #VXWORKS_VERSION = 6.8
@@ -19,6 +27,7 @@ VXWORKS_VERSION = 6.9
 # CONFIG_SITE.$(EPICS_HOST_ARCH).vxWorksCommon file.
 
 # WIND_BASE is where you installed the Wind River software.
+# Under vxWorks 6.x this is *not* the same as the old VX_DIR setting
 
 #WIND_BASE = /usr/local/vw/tornado22-$(ARCH_CLASS)
 WIND_BASE = /usr/local/vw/vxWorks-$(VXWORKS_VERSION)

configure/os/CONFIG_SITE.linux-x86.linux-arm

@@ -8,8 +8,7 @@ GNU_TARGET = arm-xilinx-linux-gnueabi
 
 # Set GNU tools install path
 # Examples are installations at the APS:
-#GNU_DIR = /usr/local/vw/zynq-2011.09
-GNU_DIR = /usr/local/vw/zynq-2016.1/gnu/arm/lin
+GNU_DIR = /usr/local/vw/zynq-2011.09
 #GNU_DIR = /usr/local/Xilinx/SDK/2016.3/gnu/arm/lin
 #GNU_DIR = /APSshare/XilinxSDK/2015.4/gnu/arm/lin
 

configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw

@@ -14,10 +14,10 @@
 #GNU_DIR = /usr/local
 
 # Different distribution cross-build packages use different prefixes:
-# Ubuntu, RHEL7:
-CMPLR_PREFIX = i686-w64-mingw32-
-# RHEL6:
-#CMPLR_PREFIX = i686-pc-mingw32-
+# Ubuntu:
+#CMPLR_PREFIX = i686-w64-mingw32-
+# RHEL:
+CMPLR_PREFIX = i686-pc-mingw32-
 # Debian?
 #CMPLR_PREFIX = i586-mingw32msvc-
 

documentation/KnownProblems.html

@@ -4,33 +4,25 @@
 <html xmlns="http://www.w3.org/1999/xhtml">
 <head>
   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
-  <title>Known Problems in EPICS 7.0.2</title>
+  <title>Known Problems in R3.15.7</title>
 </head>
 
 <body>
-<h1 style="text-align: center">EPICS 7.0.2: Known Problems</h1>
+<h1 style="text-align: center">EPICS Base R3.15.7: Known Problems</h1>
 
 <p>Any patch files linked below should be applied at the root of the
-base-7.0.2 tree. Download them, then use the GNU Patch program as
+base-3.15.7 tree. Download them, then use the GNU Patch program as
 follows:</p>
 
-<blockquote><pre>% <b>cd <i>/path/to/</i>base-7.0.2</b>
+<blockquote><pre>% <b>cd <i>/path/to/</i>base-3.15.7</b>
 % <b>patch -p1 &lt; <i>/path/to/</i>file.patch</b></pre></blockquote>
 
-<p>The following problems were known by the developers at the time of this
-release:</p>
+<p>The following significant problems have been reported with this
+version of EPICS Base:</p>
 
 <ul>
 
-<!-- Items added after release should be formatted thusly:
-  <li>YYYY-MM-DD: Description of problem.
-    <a href="fix.patch">This patch</a> fixes the problem.
-    ...</li>
--->
-
-  <li>IOCs running on some versions of Cygwin may display warnings at iocInit
-    about duplicate EPICS CA Address list entries. These warnings might be due
-    to a bug in Cygwin; they are benign and can be ignored.</li>
+  <li>None known as yet.</li>
 
 </ul>
 

documentation/README.1st

@@ -1,344 +0,0 @@
-                           Installation Instructions
-
-                            EPICS Base Release 7.0.2
-
-   --------------------------------------------------------------------------
-
-  Table of Contents
-
-     * What is EPICS base?
-     * What is new in this release?
-     * Copyright
-     * Supported platforms
-     * Supported compilers
-     * Software requirements
-     * Host system storage requirements
-     * Documentation
-     * Directory Structure
-     * Build related components
-     * Building EPICS base (Unix and Win32)
-     * Example application and extension
-     * Multiple host platforms
-
-   --------------------------------------------------------------------------
-
-  What is EPICS base?
-
-     The Experimental Physics and Industrial Control Systems (EPICS) is an
-     extensible set of software components and tools with which application
-     developers can create a control system. This control system can be used
-     to control accelerators, detectors, telescopes, or other scientific
-     experimental equipment. EPICS base is the set of core software, i.e. the
-     components of EPICS without which EPICS would not function. EPICS base
-     allows an arbitrary number of target systems, IOCs (input/output
-     controllers), and host systems, OPIs (operator interfaces) of various
-     types.
-
-  What is new in this release?
-
-     Please check the RELEASE_NOTES file in the distribution for description
-     of changes and release migration details.
-
-  Copyright
-
-     Please review the LICENSE file included in the distribution for legal
-     terms of usage.
-
-  Supported platforms
-
-     The list of platforms supported by this version of EPICS base is given
-     in the configure/CONFIG_SITE file. If you are trying to build EPICS Base
-     on an unlisted host or for a different target machine you must have the
-     proper host/target cross compiler and header files, and you will have to
-     create and add the appropriate new configure files to the
-     base/configure/os/directory. You can start by copying existing
-     configuration files in the configure/os directory and then make changes
-     for your new platforms.
-
-  Supported compilers
-
-     This version of EPICS base has been built and tested using the host
-     vendor's C and C++ compilers, as well as the GNU gcc and g++ compilers.
-     The GNU cross-compilers work for all cross-compiled targets. You may
-     need the C and C++ compilers to be in your search path to do EPICS
-     builds; check the definitions of CC and CCC in
-     base/configure/os/CONFIG.<host>.<host> if you have problems.
-
-  Software requirements
-
-     GNU make
-     You must use the GNU version of make for EPICS builds, and we now
-     recommend version 4.1 or later (version 3.82 may work on Linux, but
-     doesn't on Windows).
-
-     Perl
-     You must have Perl version 5.8.1 or later installed. The EPICS
-     configuration files do not specify the perl full pathname, so the perl
-     executable must be found through your normal search path.
-
-     Unzip and tar (Winzip on WIN32 systems)
-     You must have tools available to unzip and untar the EPICS base
-     distribution file.
-
-     Target systems
-     EPICS supports IOCs running on embedded platforms such as VxWorks and
-     RTEMS built using a cross-compiler, and also supports soft IOCs running
-     as processes on the host platform.
-
-     vxWorks
-     You must have vxWorks 6 installed if any of your target systems are
-     vxWorks systems; the C++ compilers for vxWorks 5.x are now too old to
-     support. The vxWorks installation provides the cross-compiler and header
-     files needed to build for these targets. The absolute path to and the
-     version number of the vxWorks installation must be set in the
-     base/configure/os/CONFIG_SITE.Common.vxWorksCommon file or in one of its
-     target-specific overrides.
-
-     Consult the vxWorks 6.x EPICS web pages and the vxWorks documentation
-     for information about configuring your vxWorks operating system for use
-     with EPICS.
-
-     RTEMS
-     For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or
-     4.10. The newer 4.11 or 5.x releases are not supported yet.
-
-     Command-line editing libraries
-     GNU readline or other OS-specific libraries can be used by the IOC shell
-     to provide command line editing and history recall. The default setting
-     is different for each OS. On Linux the default is to use READLINE since
-     most distributions include it. On MacOS the default is also READLINE
-     since Apple provides a compatible library, although it isn't GNU. On
-     RTEMS we support GNU readline and Tecla, although the default is to use
-     neither since these have to be added to the RTEMS installation
-     separately. On vxWorks we support the built-in ledLib library.
-
-  Host system storage requirements
-
-     The compressed tar file is approximately 1.6 MB in size. The
-     distribution source tree takes up approximately 12 MB. Each host target
-     will need around 40 MB for build files, and each cross-compiled target
-     around 20 MB.
-
-  Documentation
-
-     EPICS documentation is available through the EPICS website at Argonne.
-
-     Release specific documentation can also be found in the
-     base/documentation directory of the distribution.
-
-  Directory Structure
-
-    Distribution directory structure:
-
-         base                    Root directory of the base distribution
-         base/configure          Operating system independent build config files
-         base/configure/os       Operating system dependent build config files
-         base/documentation      Distribution documentation
-         base/src                Source code in various subdirectories
-         base/startup            Scripts for setting up path and environment
-
-    Install directories created by the build:
-
-         bin                     Installed scripts and executables in subdirs
-         cfg                     Installed build configuration files
-         db                      Installed data bases
-         dbd                     Installed data base definitions
-         doc                     Installed documentation files
-         html                    Installed html documentation
-         include                 Installed header files
-         include/os              Installed os specific header files in subdirs
-         include/compiler        Installed compiler-specific header files
-         lib                     Installed libraries in arch subdirectories
-         lib/perl                Installed perl modules
-         templates               Installed templates
-
-  Build related components
-
-    base/documentation directory - contains setup, build, and install documents
-
-         README.1st           Instructions for setup and building epics base
-         README.html          html version of README.1st
-         README.darwin.html   Installation notes for Mac OS X (Darwin)
-         RELEASE_NOTES.html   Notes on release changes
-         KnownProblems.html   List of known problems and workarounds
-
-    base/startup directory - contains scripts to set environment and path
-
-         EpicsHostArch       Shell script to set EPICS_HOST_ARCH env variable
-         unix.csh            C shell script to set path and env variables
-         unix.sh             Bourne shell script to set path and env variables
-         win32.bat           Bat file example to configure win32-x86 target
-         windows.bat         Bat file example to configure windows-x64 target
-
-    base/configure directory - contains build definitions and rules
-
-         CONFIG                Includes configure files and allows variable overrides
-         CONFIG.CrossCommon    Cross build definitions
-         CONFIG.gnuCommon      Gnu compiler build definitions for all archs
-         CONFIG_ADDONS         Definitions for <osclass> and DEFAULT options
-         CONFIG_APP_INCLUDE
-         CONFIG_BASE           EPICS base tool and location definitions
-         CONFIG_BASE_VERSION   Definitions for EPICS base version number
-         CONFIG_COMMON         Definitions common to all builds
-         CONFIG_ENV            Definitions of EPICS environment variables
-         CONFIG_FILE_TYPE
-         CONFIG_SITE           Site specific make definitions
-         CONFIG_SITE_ENV       Site defaults for EPICS environment variables
-         MAKEFILE              Installs CONFIG* RULES* creates
-         RELEASE               Location of external products
-         RULES                 Includes appropriate rules file
-         RULES.Db              Rules for database and database definition files
-         RULES.ioc             Rules for application iocBoot/ioc* directory
-         RULES_ARCHS           Definitions and rules for building architectures
-         RULES_BUILD           Build and install rules and definitions
-         RULES_DIRS            Definitions and rules for building subdirectories
-         RULES_EXPAND
-         RULES_FILE_TYPE
-         RULES_TARGET
-         RULES_TOP             Rules specific to a <top> dir (uninstall and tar)
-         Sample.Makefile       Sample makefile with comments
-
-    base/configure/os directory - contains os-arch specific definitions
-
-         CONFIG.<host>.<target>      Specific host-target build definitions
-         CONFIG.Common.<target>      Specific target definitions for all hosts
-         CONFIG.<host>.Common        Specific host definitions for all targets
-         CONFIG.UnixCommon.Common    Definitions for Unix hosts and all targets
-         CONFIG.Common.UnixCommon    Definitions for Unix targets and all hosts
-         CONFIG.Common.vxWorksCommon Specific host definitions for all vx targets
-         CONFIG_SITE.<host>.<target> Site specific host-target definitions
-         CONFIG_SITE.Common.<target> Site specific target defs for all hosts
-         CONFIG_SITE.<host>.Common   Site specific host defs for all targets
-
-  Building EPICS base (Unix and Win32)
-
-    Unpack file
-
-       Unzip and untar the distribution file. Use WinZip on Windows systems.
-
-    Set environment variables
-
-       Files in the base/startup directory have been provided to help set
-       required path and other environment variables.
-
-       EPICS_HOST_ARCH
-       Before you can build or use EPICS Base, the environment variable
-       EPICS_HOST_ARCH should be defined. A perl script EpicsHostArch.pl in
-       the base/startup directory has been provided to help set
-       EPICS_HOST_ARCH. You should have EPICS_HOST_ARCH set to your host
-       operating system followed by a dash and then your CPU architecture,
-       e.g. linux-x86_64. If you are not using the OS vendor's c/c++ compiler
-       for host builds, you will need another dash followed by the alternate
-       compiler name (e.g. "-gnu" for GNU c/c++ compilers on a solaris host
-       or "-mingw" for MinGW c/c++ compilers on a WIN32 host). See
-       configure/CONFIG_SITE for a list of supported EPICS_HOST_ARCH values.
-
-       PERLLIB
-       On WIN32, some versions of Perl require that the environment variable
-       PERLLIB be set to <perl directory location>.
-
-       PATH
-       As already mentioned, you must have the perl executable and you may
-       need C and C++ compilers in your search path. For building base you
-       also must have echo in your search path. For Unix host builds you also
-       need ln, cpp, cp, rm, mv, and mkdir in your search path and /bin/chmod
-       must exist. On some Unix systems you may also need ar and ranlib in
-       your path, and the C compiler may require as and ld in your path. On
-       solaris systems you need uname in your path.
-
-       LD_LIBRARY_PATH
-       EPICS shared libraries and executables normally contain the full path
-       to any libraries they require. However, if you move the EPICS files or
-       directories from their build-time location then in order for the
-       shared libraries to be found at runtime LD_LIBRARY_PATH must include
-       the full pathname to $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) when
-       invoking executables, or some equivalent OS-specific mechanism (such
-       as /etc/ld.so.conf on Linux) must be used. Shared libraries are now
-       built by default on all Unix type hosts.
-
-    Do site-specific build configuration
-
-       Site configuration
-       To configure EPICS, you may want to modify the default definitions in
-       the following files:
-
-         configure/CONFIG_SITE      Build choices. Specify target archs.
-         configure/CONFIG_SITE_ENV  Environment variable defaults
-         configure/RELEASE          TORNADO2 full path location
-
-       Host configuration
-       To configure each host system, you may override the default
-       definitions by adding a new file in the configure/os directory with
-       override definitions. The new file should have the same name as the
-       distribution file to be overridden except with CONFIG in the name
-       changed to CONFIG_SITE.
-
-         configure/os/CONFIG.<host>.<host>      Host build settings
-         configure/os/CONFIG.<host>.Common      Host common build settings
-
-       Target configuration
-       To configure each target system, you may override the default
-       definitions by adding a new file in the configure/os directory with
-       override definitions. The new file should have the same name as the
-       distribution file to be overridden except with CONFIG in the name
-       replaced by CONFIG_SITE. This step is necessary even if the host
-       system is the only target system.
-
-         configure/os/CONFIG.Common.<target>     Target common settings
-         configure/os/CONFIG.<host>.<target>     Host-target settings
-
-    Build EPICS base
-
-       After configuring the build you should be able to build EPICS base by
-       issuing the following commands in the distribution's root directory
-       (base):
-
-         gnumake clean uninstall
-         gnumake
-
-       The command "gnumake clean uninstall" will remove all files and
-       directories generated by a previous build. The command "gnumake" will
-       build and install everything for the configured host and targets.
-
-       It is recommended that you do a "gnumake clean uninstall" at the root
-       directory of an EPICS directory structure before each complete rebuild
-       to ensure that all components will be rebuilt.
-
-  Example application and extension
-
-     A perl tool, makeBaseApp.pl is included in the distribution file. This
-     script will create a sample application that can be built and then
-     executed to try out this release of base.
-
-     Instructions for building and executing the example IOC application can
-     be found in the section "Example Application" of Chapter 2, "Getting
-     Started", in the "IOC Application Developer's Guide" for this release.
-     The "Example IOC Application" section briefly explains how to create and
-     build an example application in a user created <top> directory. It also
-     explains how to run the example application on a vxWorks ioc or as a
-     process on the host system. By running the example application as a
-     host-based IOC, you will be able to quickly implement a complete EPICS
-     system and be able to run channel access clients on the host system.
-
-     A perl script, makeBaseExt.pl, is included in the distribution file.
-     This script will create a sample extension that can be built and
-     executed. The makeBaseApp.pl and makeBaseExt.pl scripts are installed
-     into the install location bin/<hostarch> directory during the base
-     build.
-
-  Multiple host platforms
-
-     You can build using a single EPICS directory structure on multiple host
-     systems and for multiple cross target systems. The intermediate and
-     binary files generated by the build will be created in separate
-     subdirectories and installed into the appropriate separate host/target
-     install directories. EPICS executables and perl scripts are installed
-     into the $(INSTALL_LOCATION)/bin/<arch> directories. Libraries are
-     installed into $(INSTALL_LOCATION)/lib/<arch>. The default definition
-     for $(INSTALL_LOCATION) is $(TOP) which is the root directory in the
-     distribution directory structure, base. Created object files are stored
-     in O.<arch> source subdirectories, This allows objects for multiple
-     cross target architectures to be maintained at the same time. To build
-     EPICS base for a specific host/target combination you must have the
-     proper host/target C/C++ cross compiler and target header files and the
-     base/configure/os directory must have the appropriate configure files.

documentation/README.html

@@ -1,382 +0,0 @@
-<!DOCTYPE HTML>
-<!-- Generate the README.1st file from this file using:
-    elinks -dump -no-numbering -no-references -dump-width 80 README.html
-  -->
-<HTML>
-<HEAD>
-<TITLE>README - EPICS Base Installation Instructions</TITLE>
-</HEAD>
-<BODY>
-<CENTER>
-<H1>Installation Instructions</H1>
-<H2>EPICS Base Release 7.0.2</H2><BR>
-</CENTER>
-<HR>
-<H3> Table of Contents</H3>
-<UL>
-<LI><A HREF="#0_0_1"> What is EPICS base?</A></LI>
-<LI><A HREF="#0_0_2"> What is new in this release?</A></LI>
-<LI><A HREF="#0_0_3"> Copyright</A></LI>
-<LI><A HREF="#0_0_4"> Supported platforms</A></LI>
-<LI><A HREF="#0_0_5"> Supported compilers</A></LI>
-<LI><A HREF="#0_0_6"> Software requirements</A></LI>
-<LI><A HREF="#0_0_7"> Host system storage requirements</A></LI>
-<LI><A HREF="#0_0_8"> Documentation</A></LI>
-<LI><A HREF="#0_0_10"> Directory Structure</A></LI>
-<LI><A HREF="#0_0_11"> Build related components</A></LI>
-<LI><A HREF="#0_0_12"> Building EPICS base (Unix and Win32)</A></LI>
-<LI><A HREF="#0_0_13"> Example application and extension</A></LI>
-<LI><A HREF="#0_0_14"> Multiple host platforms</A></LI>
-</UL>
-<HR>
-
-<H3><A NAME="0_0_1"> What is EPICS base?</A></H3>
-<BLOCKQUOTE>The Experimental Physics and Industrial Control Systems
- (EPICS) is an extensible set of software components and tools with
- which application developers can create a control system. This control
- system can be used to control accelerators, detectors, telescopes, or
- other scientific experimental equipment. EPICS base is the set of core
- software, i.e. the components of EPICS without which EPICS would not
- function. EPICS base allows an arbitrary number of target systems, IOCs
- (input/output controllers), and host systems, OPIs (operator
- interfaces) of various types.</BLOCKQUOTE>
-
-<H3><A NAME="0_0_2"> What is new in this release?</A></H3>
-<BLOCKQUOTE> Please check the RELEASE_NOTES file in the distribution for
- description of changes and release migration details.</BLOCKQUOTE>
-
-<H3><A NAME="0_0_3"> Copyright</A></H3>
-<BLOCKQUOTE>Please review the LICENSE file included in the
- distribution for legal terms of usage.</BLOCKQUOTE>
-
-<H3><A NAME="0_0_4"> Supported platforms</A></H3>
-
-<BLOCKQUOTE>The list of platforms supported by this version of EPICS base
- is given in the configure/CONFIG_SITE file. If you are trying to build
- EPICS Base on an unlisted host or for a different target machine you
- must have the proper host/target cross compiler and header files, and
- you will have to create and add the appropriate new configure files to
- the base/configure/os/directory. You can start by copying existing
- configuration files in the configure/os directory and then make changes
- for your new platforms.</BLOCKQUOTE>
-
-<H3><A NAME="0_0_5"> Supported compilers</A></H3>
-
-<BLOCKQUOTE>This version of EPICS base has been built and tested using the host
- vendor's C and C++ compilers, as well as the GNU gcc and g++ compilers. The GNU
- cross-compilers work for all cross-compiled targets. You may need the C and C++
- compilers to be in your search path to do EPICS builds; check the definitions
- of CC and CCC in base/configure/os/CONFIG.&lt;host&gt;.&lt;host&gt; if you have
- problems.</BLOCKQUOTE>
-
-<H3><A NAME="0_0_6"> Software requirements</A></H3>
-
-<BLOCKQUOTE><B>GNU make</B><BR>
- You must use the GNU version of make for EPICS builds, and we now recommend
- version 4.1 or later (version 3.82 may work on Linux, but doesn't on Windows).
-
-<P><B>Perl</B><BR>
- You must have Perl version 5.8.1 or later installed. The EPICS configuration
- files do not specify the perl full pathname, so the perl executable must
- be found through your normal search path.</P>
-
-<P><B>Unzip and tar (Winzip on WIN32 systems)</B><BR>
- You must have tools available to unzip and untar the EPICS base
- distribution file.</P>
-
-<P><B>Target systems</B><BR>
- EPICS supports IOCs running on embedded platforms such as VxWorks
- and RTEMS built using a cross-compiler, and also supports soft IOCs running
- as processes on the host platform.</P>
-
-<P><B>vxWorks</B><BR>
- You must have vxWorks 6 installed if any of your target systems are vxWorks
- systems; the C++ compilers for vxWorks 5.x are now too old to support. The
- vxWorks installation provides the cross-compiler and header files needed to
- build for these targets. The absolute path to and the version number of the
- vxWorks installation must be set in the
- base/configure/os/CONFIG_SITE.Common.vxWorksCommon file or in one of its
- target-specific overrides.</P>
-
-<P>Consult the <a href="https://epics.anl.gov/base/vxWorks6.php">vxWorks
- 6.x</a> EPICS web pages and the vxWorks documentation for information
- about configuring your vxWorks operating system for use with EPICS.</P>
-
-<P><B>RTEMS</B><BR>
- For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or 4.10. The
- newer 4.11 or 5.x releases are not supported yet.</P>
-
-<P><B>Command-line editing libraries</B><BR>
-
- GNU readline or other OS-specific libraries can be used by the IOC shell to
- provide command line editing and history recall. The default setting is
- different for each OS. On Linux the default is to use READLINE since most
- distributions include it. On MacOS the default is also READLINE since Apple
- provides a compatible library, although it isn't GNU. On RTEMS we support GNU
- readline and Tecla, although the default is to use neither since these have to
- be added to the RTEMS installation separately. On vxWorks we support the
- built-in ledLib library.</P>
-
-</BLOCKQUOTE>
-
-<H3><A NAME="0_0_7"> Host system storage requirements</A></H3>
-
-<BLOCKQUOTE>The compressed tar file is approximately 1.6 MB in size. The
- distribution source tree takes up approximately 12 MB. Each host target will
- need around 40 MB for build files, and each cross-compiled target around 20
- MB.</BLOCKQUOTE>
-
-<H3><A NAME="0_0_8"> Documentation</A></H3>
-<BLOCKQUOTE>EPICS documentation is available through the
- <a href="https://epics.anl.gov/">EPICS website</a> at Argonne.
- <P>Release specific documentation can also be found in the base/documentation
- directory of the distribution.</BLOCKQUOTE>
-
-<H3><A NAME="0_0_10"> Directory Structure</A></H3>
-<BLOCKQUOTE><H4>Distribution directory structure:</H4>
-
-<PRE>
-        base                    Root directory of the base distribution
-        base/configure          Operating system independent build config files
-        base/configure/os       Operating system dependent build config files
-        base/documentation      Distribution documentation
-        base/src                Source code in various subdirectories
-        base/startup            Scripts for setting up path and environment
-</PRE>
-
-<H4>Install directories created by the build:</H4>
-<PRE>
-        bin                     Installed scripts and executables in subdirs
-        cfg                     Installed build configuration files
-        db                      Installed data bases
-        dbd                     Installed data base definitions
-        doc                     Installed documentation files
-        html                    Installed html documentation
-        include                 Installed header files
-        include/os              Installed os specific header files in subdirs
-        include/compiler        Installed compiler-specific header files
-        lib                     Installed libraries in arch subdirectories
-        lib/perl                Installed perl modules
-        templates               Installed templates
-</PRE>
-</BLOCKQUOTE>
-
-<H3><A NAME="0_0_11"> Build related components</A></H3>
-<BLOCKQUOTE>
-
-<H4>base/documentation directory - contains setup, build, and install
- documents</H4>
- <PRE>
-        README.1st           Instructions for setup and building epics base
-        README.html          html version of README.1st
-        README.darwin.html   Installation notes for Mac OS X (Darwin)
-        RELEASE_NOTES.html   Notes on release changes
-        KnownProblems.html   List of known problems and workarounds
-</PRE>
-
-<H4>base/startup directory - contains scripts to set environment and path</H4>
-<PRE>
-        EpicsHostArch       Shell script to set EPICS_HOST_ARCH env variable
-        unix.csh            C shell script to set path and env variables
-        unix.sh             Bourne shell script to set path and env variables
-        win32.bat           Bat file example to configure win32-x86 target
-        windows.bat         Bat file example to configure windows-x64 target
-</PRE>
-
-<H4>base/configure directory - contains build definitions and rules</H4>
-<PRE>
-        CONFIG                Includes configure files and allows variable overrides
-        CONFIG.CrossCommon    Cross build definitions
-        CONFIG.gnuCommon      Gnu compiler build definitions for all archs
-        CONFIG_ADDONS         Definitions for &lt;osclass&gt; and DEFAULT options
-        CONFIG_APP_INCLUDE
-        CONFIG_BASE           EPICS base tool and location definitions
-        CONFIG_BASE_VERSION   Definitions for EPICS base version number
-        CONFIG_COMMON         Definitions common to all builds
-        CONFIG_ENV            Definitions of EPICS environment variables
-        CONFIG_FILE_TYPE
-        CONFIG_SITE           Site specific make definitions
-        CONFIG_SITE_ENV       Site defaults for EPICS environment variables
-        MAKEFILE              Installs CONFIG* RULES* creates
-        RELEASE               Location of external products
-        RULES                 Includes appropriate rules file
-        RULES.Db              Rules for database and database definition files
-        RULES.ioc             Rules for application iocBoot/ioc* directory
-        RULES_ARCHS           Definitions and rules for building architectures
-        RULES_BUILD           Build and install rules and definitions
-        RULES_DIRS            Definitions and rules for building subdirectories
-        RULES_EXPAND
-        RULES_FILE_TYPE
-        RULES_TARGET
-        RULES_TOP             Rules specific to a &lt;top&gt; dir (uninstall and tar)
-        Sample.Makefile       Sample makefile with comments
-</PRE>
-
-<H4>base/configure/os directory - contains os-arch specific definitions</H4>
-<PRE>
-        CONFIG.&lt;host&gt;.&lt;target&gt;      Specific host-target build definitions
-        CONFIG.Common.&lt;target&gt;      Specific target definitions for all hosts
-        CONFIG.&lt;host&gt;.Common        Specific host definitions for all targets
-        CONFIG.UnixCommon.Common    Definitions for Unix hosts and all targets
-        CONFIG.Common.UnixCommon    Definitions for Unix targets and all hosts
-        CONFIG.Common.vxWorksCommon Specific host definitions for all vx targets
-        CONFIG_SITE.&lt;host&gt;.&lt;target&gt; Site specific host-target definitions
-        CONFIG_SITE.Common.&lt;target&gt; Site specific target defs for all hosts
-        CONFIG_SITE.&lt;host&gt;.Common   Site specific host defs for all targets
-</PRE>
-
-</BLOCKQUOTE>
-
-<H3><A NAME="0_0_12"> Building EPICS base (Unix and Win32)</A></H3>
-<BLOCKQUOTE>
-
-<H4> Unpack file</H4>
-<BLOCKQUOTE>
-Unzip and untar the distribution file. Use WinZip on Windows
- systems.
-</BLOCKQUOTE>
-
-<H4>Set environment variables</H4>
-<BLOCKQUOTE>
-Files in the base/startup directory have been provided to
- help set required path and other environment variables.
-
-<P><B>EPICS_HOST_ARCH</B><BR>
- Before you can build or use EPICS Base, the environment variable
- EPICS_HOST_ARCH should be defined. A perl script EpicsHostArch.pl in the
- base/startup directory has been provided to help set EPICS_HOST_ARCH.
- You should have EPICS_HOST_ARCH set to your host operating system
- followed by a dash and then your CPU architecture, e.g. linux-x86_64.
- If you are not using the OS vendor's c/c++ compiler for host builds,
- you will need another dash followed by the alternate compiler name
- (e.g. &quot;-gnu&quot; for GNU c/c++ compilers on a solaris host or &quot;-mingw&quot;
- for MinGW c/c++ compilers on a WIN32 host). See configure/CONFIG_SITE
- for a list of supported EPICS_HOST_ARCH values.</P>
-
-<P><B>PERLLIB</B><BR>
- On WIN32, some versions of Perl require that the environment
- variable PERLLIB be set to &lt;perl directory location&gt;.</P>
-
-<P><B>PATH</B><BR>
- As already mentioned, you must have the perl executable and you may
- need C and C++ compilers in your search path. For building base you
- also must have echo in your search path. For Unix host builds you also
- need ln, cpp, cp, rm, mv, and mkdir in your search path and /bin/chmod
- must exist. On some Unix systems you may also need ar and ranlib in
- your path, and the C compiler may require as and ld in your path. On
- solaris systems you need uname in your path.</P>
-
-<P><B>LD_LIBRARY_PATH</B><BR>
-
- EPICS shared libraries and executables normally contain the full path
- to any libraries they require.
- However, if you move the EPICS files or directories from their build-time
- location then in order for the shared libraries to be found at runtime
- LD_LIBRARY_PATH must include the full pathname to
- $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) when invoking executables, or
- some equivalent OS-specific mechanism (such as /etc/ld.so.conf on Linux)
- must be used.
- Shared libraries are now built by default on all Unix type hosts.</P>
-</BLOCKQUOTE>
-
-<H4>Do site-specific build configuration</H4>
-<BLOCKQUOTE>
-
-<B>Site configuration</B><BR>
- To configure EPICS, you may want to modify the default definitions
- in the following files:
-<PRE>
-        configure/CONFIG_SITE      Build choices. Specify target archs.
-        configure/CONFIG_SITE_ENV  Environment variable defaults
-        configure/RELEASE          TORNADO2 full path location
-</PRE>
-
-<B> Host configuration</B><BR>
- To configure each host system, you may override the default
- definitions by adding a new file in the configure/os directory with
- override definitions. The new file should have the same name as the
- distribution file to be overridden except with CONFIG in the name
- changed to CONFIG_SITE.
-
-<PRE>
-        configure/os/CONFIG.&lt;host&gt;.&lt;host&gt;      Host build settings
-        configure/os/CONFIG.&lt;host&gt;.Common      Host common build settings
-</PRE>
-
-<B>Target configuration</B><BR>
- To configure each target system, you may override the default
- definitions by adding a new file in the configure/os directory with
- override definitions. The new file should have the same name as the
- distribution file to be overridden except with CONFIG in the name
- replaced by CONFIG_SITE. This step is necessary even if the host system
- is the only target system.
- <PRE>
-        configure/os/CONFIG.Common.&lt;target&gt;     Target common settings
-        configure/os/CONFIG.&lt;host&gt;.&lt;target&gt;     Host-target settings
-</PRE>
-</BLOCKQUOTE>
-
-<H4>Build EPICS base</H4>
-<BLOCKQUOTE>After configuring the build you should be able to build
- EPICS base by issuing the following commands in the distribution's root
- directory (base):
- <PRE>
-        gnumake clean uninstall
-        gnumake
-</PRE>
-
- The command &quot;gnumake clean uninstall&quot;
- will remove all files and directories generated by a previous build.
- The command &quot;gnumake&quot; will build and install everything for the
- configured host and targets.
-
-<P> It is recommended that you do a &quot;gnumake clean uninstall&quot; at the
- root directory of an EPICS directory structure before each complete
- rebuild to ensure that all components will be rebuilt.
-</BLOCKQUOTE>
-</BLOCKQUOTE>
-
-<H3><A NAME="0_0_13"> Example application and extension</A></H3>
-<BLOCKQUOTE>A perl tool, makeBaseApp.pl is included in the distribution
- file. This script will create a sample application that can be built
- and then executed to try out this release of base.
-
-<P>
- Instructions for building and executing the example IOC application
- can be found in the section &quot;Example Application&quot; of Chapter 2,
- &quot;Getting Started&quot;, in the &quot;IOC Application Developer's Guide&quot; for this
- release. The &quot;Example IOC Application&quot; section briefly explains how to
- create and build an example application in a user created &lt;top&gt;
- directory. It also explains how to run the example application on a
- vxWorks ioc or as a process on the host system.
- By running the example application as a host-based IOC, you will be
- able to quickly implement a complete EPICS system and be able to run channel
- access clients on the host system.
-
-<P>
- A perl script,
- makeBaseExt.pl, is included in the distribution file. This script will
- create a sample extension that can be built and executed. The
- makeBaseApp.pl and makeBaseExt.pl scripts are installed into the
- install location bin/&lt;hostarch&gt; directory during the base build.
-</BLOCKQUOTE>
-
-<H3><A NAME="0_0_14"> Multiple host platforms</A></H3>
-<BLOCKQUOTE>You can build using a single EPICS directory structure on
- multiple host systems and for multiple cross target systems. The
- intermediate and binary files generated by the build will be created in
- separate subdirectories and installed into the appropriate separate
- host/target install directories. EPICS executables and perl scripts are
- installed into the <TT>$(INSTALL_LOCATION)/bin/&lt;arch&gt;</TT> directories.
- Libraries are installed into $<TT>(INSTALL_LOCATION)/lib/&lt;arch&gt;</TT>.
- The default definition for <TT>$(INSTALL_LOCATION)</TT> is <TT>$(TOP)</TT>
- which is the root directory in the distribution directory structure,
- base. Created object files are stored in O.&lt;arch&gt; source
- subdirectories, This allows objects for multiple cross target
- architectures to be maintained at the same time. To build EPICS base
- for a specific host/target combination you must have the proper
- host/target C/C++ cross compiler and target header files and the
- base/configure/os directory must have the appropriate configure files.
-</BLOCKQUOTE>
-</BODY>
-</HTML>

documentation/README.md

@@ -0,0 +1,373 @@
+# Installation Instructions
+
+## EPICS Base Release 3.15.7
+
+-----
+
+### Table of Contents
+
+  - [What is EPICS base?](#0_0_1)
+  - [What is new in this release?](#0_0_2)
+  - [Copyright](#0_0_3)
+  - [Supported platforms](#0_0_4)
+  - [Supported compilers](#0_0_5)
+  - [Software requirements](#0_0_6)
+  - [Host system storage requirements](#0_0_7)
+  - [Documentation](#0_0_8)
+  - [Directory Structure](#0_0_10)
+  - [Build related components](#0_0_11)
+  - [Building EPICS base (Unix and Win32)](#0_0_12)
+  - [Example application and extension](#0_0_13)
+  - [Multiple host platforms](#0_0_14)
+
+-----
+
+### <span id="0_0_1">What is EPICS base?</span>
+
+The Experimental Physics and Industrial Control Systems (EPICS) is an
+extensible set of software components and tools with which application
+developers can create a control system. This control system can be
+used to control accelerators, detectors, telescopes, or other
+scientific experimental equipment. EPICS base is the set of core
+software, i.e. the components of EPICS without which EPICS would not
+function. EPICS base allows an arbitrary number of target systems,
+IOCs (input/output controllers), and host systems, OPIs (operator
+interfaces) of various types.
+
+### <span id="0_0_2">What is new in this release?</span>
+
+Please check the `RELEASE_NOTES` file in the distribution for
+description of changes and release migration details.
+
+### <span id="0_0_3">Copyright</span>
+
+Please review the LICENSE file included in the distribution for legal
+terms of usage.
+
+### <span id="0_0_4">Supported platforms</span>
+
+The list of platforms supported by this version of EPICS base is given
+in the `configure/CONFIG_SITE` file. If you are trying to build EPICS
+Base on an unlisted host or for a different target machine you must
+have the proper host/target cross compiler and header files, and you
+will have to create and add the appropriate new configure files to the
+base/configure/os/directory. You can start by copying existing
+configuration files in the configure/os directory and then make
+changes for your new platforms.
+
+### <span id="0_0_5">Supported compilers</span>
+
+This version of EPICS base has been built and tested using the host
+vendor's C and C++ compilers, as well as the GNU gcc and g++
+compilers. The GNU cross-compilers work for all cross-compiled
+targets. You may need the C and C++ compilers to be in your search
+path to do EPICS builds; check the definitions of CC and CCC in
+base/configure/os/CONFIG.&lt;host>.&lt;host> if you have problems.
+
+### <span id="0_0_6">Software requirements</span>
+
+**GNU make**
+You must use GNU make, gnumake, for any EPICS builds. Set your path so
+that a gnumake version 3.81 or later is available.
+
+**Perl**
+You must have Perl version 5.8.1 or later installed. The EPICS
+configuration files do not specify the perl full pathname, so the perl
+executable must be found through your normal search path.
+
+**Unzip and tar (Winzip on WIN32 systems)**
+You must have tools available to unzip and untar the EPICS base
+distribution file.
+
+**Target systems**
+EPICS supports IOCs running on embedded platforms such as VxWorks and
+RTEMS built using a cross-compiler, and also supports soft IOCs
+running as processes on the host platform.
+
+**vxWorks**
+You must have vxWorks 5.5.x or 6.x installed if any of your target
+systems are vxWorks systems; the C++ compiler for vxWorks 5.4 is now
+too old to support. The vxWorks installation provides the
+cross-compiler and header files needed to build for these targets. The
+absolute path to and the version number of the vxWorks installation
+must be set in the `base/configure/os/CONFIG_SITE.Common.vxWorksCommon`
+file or in one of its target-specific overrides.
+
+Consult the [vxWorks 5.x](https://epics.anl.gov/base/tornado.php) or
+[vxWorks 6.x](https://epics.anl.gov/base/vxWorks6.php) EPICS web pages
+about and the vxWorks documentation for information about configuring
+your vxWorks operating system for use with EPICS.
+
+**RTEMS**
+For RTEMS targets, you need RTEMS core and toolset version 4.9.2 or
+later.
+
+**GNU readline or Tecla library**
+GNU readline and Tecla libraries can be used by the IOC shell to
+provide command line editing and command line history recall and edit.
+GNU readline (or Tecla library) must be installed on your target
+system when `COMMANDLINE_LIBRARY` is set to READLINE (or TECLA) for
+that target. EPICS (EPICS shell) is the default specified in
+`CONFIG_COMMON`. A READLINE override is defined for linux-x86 in the
+EPICS distribution. Comment out `COMMANDLINE_LIBRARY=READLINE` in
+`configure/os/CONFIG_SITE.Common.linux-x86` if readline is not
+installed on linux-x86. Command-line editing and history will then be
+those supplied by the os. On vxWorks the ledLib command-line input
+library is used instead.
+
+### <span id="0_0_7">Host system storage requirements</span>
+
+The compressed tar file is approximately 1.6 MB in size. The
+distribution source tree takes up approximately 12 MB. Each host
+target will need around 40 MB for build files, and each cross-compiled
+target around 20 MB.
+
+### <span id="0_0_8">Documentation</span>
+
+EPICS documentation is available through the [EPICS
+website](https://epics.anl.gov/) at Argonne.
+
+Release specific documentation can also be found in the
+base/documentation directory of the distribution.
+
+### <span id="0_0_10">Directory Structure</span>
+
+#### Distribution directory structure:
+
+```
+        base                    Root directory of the base distribution
+        base/configure          Operating system independent build config files
+        base/configure/os       Operating system dependent build config files
+        base/documentation      Distribution documentation
+        base/src                Source code in various subdirectories
+        base/startup            Scripts for setting up path and environment
+```
+
+#### Install directories created by the build:
+
+```
+        bin                     Installed scripts and executables in subdirs
+        cfg                     Installed build configuration files
+        db                      Installed data bases
+        dbd                     Installed data base definitions
+        doc                     Installed documentation files
+        html                    Installed html documentation
+        include                 Installed header files
+        include/os              Installed os specific header files in subdirs
+        include/compiler        Installed compiler-specific header files
+        lib                     Installed libraries in arch subdirectories
+        lib/perl                Installed perl modules
+        templates               Installed templates
+```
+
+### <span id="0_0_11">Build related components</span>
+
+#### base/documentation directory - contains setup, build, and install documents
+
+```
+        README.md            Instructions for setup and building epics base
+        README.darwin.html   Installation notes for Mac OS X (Darwin)
+        RELEASE_NOTES.html   Notes on release changes
+        KnownProblems.html   List of known problems and workarounds
+```
+
+#### base/startup directory - contains scripts to set environment and path
+
+```
+        EpicsHostArch       Shell script to set EPICS_HOST_ARCH env variable
+        unix.csh            C shell script to set path and env variables
+        unix.sh             Bourne shell script to set path and env variables
+        win32.bat           Bat file example to configure win32-x86 target
+        windows.bat         Bat file example to configure windows-x64 target
+```
+
+#### base/configure directory - contains build definitions and rules
+
+```
+        CONFIG                Includes configure files and allows variable overrides
+        CONFIG.CrossCommon    Cross build definitions
+        CONFIG.gnuCommon      Gnu compiler build definitions for all archs
+        CONFIG_ADDONS         Definitions for &lt;osclass> and DEFAULT options
+        CONFIG_APP_INCLUDE
+        CONFIG_BASE           EPICS base tool and location definitions
+        CONFIG_BASE_VERSION   Definitions for EPICS base version number
+        CONFIG_COMMON         Definitions common to all builds
+        CONFIG_ENV            Definitions of EPICS environment variables
+        CONFIG_FILE_TYPE
+        CONFIG_SITE           Site specific make definitions
+        CONFIG_SITE_ENV       Site defaults for EPICS environment variables
+        MAKEFILE              Installs CONFIG* RULES* creates
+        RELEASE               Location of external products
+        RULES                 Includes appropriate rules file
+        RULES.Db              Rules for database and database definition files
+        RULES.ioc             Rules for application iocBoot/ioc* directory
+        RULES_ARCHS           Definitions and rules for building architectures
+        RULES_BUILD           Build and install rules and definitions
+        RULES_DIRS            Definitions and rules for building subdirectories
+        RULES_EXPAND
+        RULES_FILE_TYPE
+        RULES_TARGET
+        RULES_TOP             Rules specific to a &lt;top> dir (uninstall and tar)
+        Sample.Makefile       Sample makefile with comments
+```
+
+#### base/configure/os directory - contains os-arch specific definitions
+
+```
+        CONFIG.&lt;host>.&lt;target>      Specific host-target build definitions
+        CONFIG.Common.&lt;target>      Specific target definitions for all hosts
+        CONFIG.&lt;host>.Common        Specific host definitions for all targets
+        CONFIG.UnixCommon.Common    Definitions for Unix hosts and all targets
+        CONFIG.Common.UnixCommon    Definitions for Unix targets and all hosts
+        CONFIG.Common.vxWorksCommon Specific host definitions for all vx targets
+        CONFIG_SITE.&lt;host>.&lt;target> Site specific host-target definitions
+        CONFIG_SITE.Common.&lt;target> Site specific target defs for all hosts
+        CONFIG_SITE.&lt;host>.Common   Site specific host defs for all targets
+```
+
+### <span id="0_0_12">Building EPICS base (Unix and Win32)</span>
+
+#### Unpack file
+
+Unzip and untar the distribution file. Use WinZip on Windows
+systems.
+
+#### Set environment variables
+
+Files in the base/startup directory have been provided to help set
+required path and other environment variables.
+
+* `EPICS_HOST_ARCH`
+Before you can build or use EPICS R3.15, the environment variable
+`EPICS_HOST_ARCH` must be defined. A perl script EpicsHostArch.pl in
+the base/startup directory has been provided to help set
+`EPICS_HOST_ARCH.` You should have `EPICS_HOST_ARCH` set to your
+host operating system followed by a dash and then your host
+architecture, e.g. solaris-sparc. If you are not using the OS
+vendor's c/c++ compiler for host builds, you will need another dash
+followed by the alternate compiler name (e.g. "-gnu" for GNU c/c++
+compilers on a solaris host or "-mingw" for MinGW c/c++ compilers on
+a WIN32 host). See `configure/CONFIG_SITE` for a list of supported
+`EPICS_HOST_ARCH` values.
+
+* `PERLLIB`
+On WIN32, some versions of Perl require that the environment
+variable PERLLIB be set to &lt;perl directory location>.
+
+* `PATH`
+As already mentioned, you must have the perl executable and you may
+need C and C++ compilers in your search path. For building base you
+also must have echo in your search path. For Unix host builds you
+also need ln, cpp, cp, rm, mv, and mkdir in your search path and
+/bin/chmod must exist. On some Unix systems you may also need ar and
+ranlib in your path, and the C compiler may require as and ld in
+your path. On solaris systems you need uname in your path.
+
+* `LD_LIBRARY_PATH`
+R3.15 shared libraries and executables normally contain the full
+path to any libraries they require. However, if you move the EPICS
+files or directories from their build-time location then in order
+for the shared libraries to be found at runtime `LD_LIBRARY_PATH`
+must include the full pathname to
+`$(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH)` when invoking
+executables, or some equivalent OS-specific mechanism (such as
+/etc/ld.so.conf on Linux) must be used. Shared libraries are now
+built by default on all Unix type hosts.
+
+#### Do site-specific build configuration
+
+**Site configuration**
+To configure EPICS, you may want to modify the default definitions
+in the following files:
+
+```
+        configure/CONFIG_SITE      Build choices. Specify target archs.
+        configure/CONFIG_SITE_ENV  Environment variable defaults
+        configure/RELEASE          TORNADO2 full path location
+```
+
+**Host configuration**
+To configure each host system, you may override the default
+definitions by adding a new file in the configure/os directory with
+override definitions. The new file should have the same name as the
+distribution file to be overridden except with CONFIG in the name
+changed to `CONFIG_SITE`.
+
+```
+        configure/os/CONFIG.&lt;host>.&lt;host>      Host build settings
+        configure/os/CONFIG.&lt;host>.Common      Host common build settings
+```
+
+**Target configuration**
+To configure each target system, you may override the default
+definitions by adding a new file in the configure/os directory with
+override definitions. The new file should have the same name as the
+distribution file to be overridden except with CONFIG in the name
+replaced by `CONFIG_SITE`. This step is necessary even if the host
+system is the only target system.
+
+```
+        configure/os/CONFIG.Common.&lt;target>     Target common settings
+        configure/os/CONFIG.&lt;host>.&lt;target>     Host-target settings
+```
+
+#### Build EPICS base
+
+After configuring the build you should be able to build EPICS base
+by issuing the following commands in the distribution's root
+directory (base):
+
+```
+        gnumake clean uninstall
+        gnumake
+```
+
+The command "gnumake clean uninstall" will remove all files and
+directories generated by a previous build. The command "gnumake"
+will build and install everything for the configured host and
+targets.
+
+It is recommended that you do a "gnumake clean uninstall" at the
+root directory of an EPICS directory structure before each complete
+rebuild to ensure that all components will be rebuilt.
+
+### <span id="0_0_13">Example application and extension</span>
+
+A perl tool, makeBaseApp.pl is included in the distribution file. This
+script will create a sample application that can be built and then
+executed to try out this release of base.
+
+Instructions for building and executing the 3.15 example application
+can be found in the section "Example Application" of Chapter 2,
+"Getting Started", in the "IOC Application Developer's Guide" for this
+release. The "Example IOC Application" section briefly explains how to
+create and build an example application in a user created &lt;top>
+directory. It also explains how to run the example application on a
+vxWorks ioc or as a process on the host system. By running the example
+application as a host-based IOC, you will be able to quickly implement
+a complete EPICS system and be able to run channel access clients on
+the host system.
+
+A perl script, makeBaseExt.pl, is included in the distribution file.
+This script will create a sample extension that can be built and
+executed. The makeBaseApp.pl and makeBaseExt.pl scripts are installed
+into the install location bin/&lt;hostarch> directory during the base
+build.
+
+### <span id="0_0_14">Multiple host platforms</span>
+
+You can build using a single EPICS directory structure on multiple
+host systems and for multiple cross target systems. The intermediate
+and binary files generated by the build will be created in separate
+subdirectories and installed into the appropriate separate host/target
+install directories. EPICS executables and perl scripts are installed
+into the `$(INSTALL_LOCATION)/bin/<arch>` directories. Libraries are
+installed into $`(INSTALL_LOCATION)/lib/<arch>`. The default
+definition for `$(INSTALL_LOCATION)` is `$(TOP)` which is the root
+directory in the distribution directory structure, base. Created
+object files are stored in O.&lt;arch> source subdirectories, This
+allows objects for multiple cross target architectures to be
+maintained at the same time. To build EPICS base for a specific
+host/target combination you must have the proper host/target C/C++
+cross compiler and target header files and the base/configure/os
+directory must have the appropriate configure files.

documentation/ReleaseChecklist.html

@@ -33,28 +33,29 @@
 <h1>EPICS Base Release Procedures &amp; Checklist</h1>
 
 <p>This document describes the procedures and provides a checklist of tasks
-that should be performed when creating production releases of EPICS Base.</p>
+that should be performed when creating new releases of EPICS Base.</p>
 
 <h3>The Release Process</h3>
 
 <p>The version released on the Feature Freeze date is designated the first
-pre-release, <tt>-pre1</tt>. The first release candidate <tt>-rc1</tt> is the
-first version that has undergone testing by the developers and has shown no
-problems that must be fixed before release. New versions should be made at about
-2-weekly intervals after the <tt>-pre1</tt> release, and designated as either
-pre-release or release candidate versions by the Release Manager. Release
-candidates are announced to the whole community via the tech-talk mailing list,
-pre-releases are announced to to the developers via the core-talk list. After a
-release candidate has been available for 2 weeks without any new problems being
-reported or major changes having to be committed, the final release can be
-made.</p>
+pre-release, <tt>-pre1</tt>. The first Release Candidate <tt>-rc1</tt> is the
+first version that has undergone widespread testing and which has no known
+problems in it that are slated to be fixed in this release. New versions should
+be made at 2-weekly intervals during the testing and debugging period, and will
+be designated as either pre-release versions or Release Candidates by the
+Release Manager. After a Release Candidate has been available to the whole
+community for testing for at least a week without any additional problems being
+reported or significant changes being committed, the branch can be designated as
+the final release version.</p>
 
 <h3>Roles</h3>
 
-<p>The following roles are used below:</p>
+<p>The following roles are required. The individuals named here have have been
+responsible for these tasks in the past and are expected to continue in the
+relevent roles unless the Release Manager designates otherwise:</p>
 
 <dl>
-  <dt><strong>Release Manager</strong> ()</dt>
+  <dt><strong>Release Manager</strong> (Ralph Lange)</dt>
     <dd>Responsible for managing and tagging the release</dd>
   <dt><strong>Platform Developers</strong> (optional)</dt>
     <dd>Responsible for individual operating system platforms</dd>
@@ -78,7 +79,7 @@ made.</p>
       <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Email all developers about the upcoming release and ask for a list
-        of remaining tasks that must be finished.</td>
+        of remaining jobs that must be finished.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -111,7 +112,7 @@ made.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Review and update this checklist for the upcoming release.</td>
+      <td>Review and update this document for the upcoming release.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -126,7 +127,6 @@ made.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <!-- Submodules... -->
       <td>Edit and commit changes to the EPICS version number file
         configure/CONFIG_BASE_VERSION.</td>
       </tr>
@@ -136,21 +136,19 @@ made.</p>
       <td>Tag the module in Git, using these tag conventions:
         <ul>
           <li>
-            <tt>R7.0.2-pre<i>n</i></tt>
+            <tt>R3.15.7-pre1</tt>
             &mdash; pre-release tag
             </li>
           <li>
-            <tt>R7.0.2-rc<i>n</i></tt>
+            <tt>R3.15.7-rc1</tt>
             &mdash; release candidate tag
             </li>
-          </ul>
+        </ul>
         <blockquote><tt>
-          cd base-7.0<br />
-          git tag -m 'ANJ: Tagged for 7.0.2-rc1' R7.0.2-rc1
+          cd base-3.15<br />
+          git tag -m 'ANJ: Tagged for 3.15.7-rc1' R3.15.7-rc1
           </tt></blockquote>
-        Note that submodules must <em>not</em> be tagged with the version used
-        for the top-level, they each have their own separate version numbers
-        that are only tagged at the final release.</td>
+        </td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -159,12 +157,12 @@ made.</p>
         script generates a gzipped tarfile directly from the tag, excluding the
         files and directories that are only used for continuous integration:
         <blockquote><tt>
-          cd base-7.0<br />
-          ./.tools/make-tar.sh R7.0.2-rc1 base-7.0.2-rc1.tar.gz base-7.0.2-rc1/
+          cd base-3.15<br />
+          git archive --prefix=base-3.15.7-rc1/ --output=base-3.15.7-rc1.tar.gz R3.15.7-rc1 configure documentation LICENSE Makefile README src startup
           </tt></blockquote>
         Create a GPG signature file of the tarfile as follows:
         <blockquote><tt>
-          gpg --armor --sign --detach-sig base-7.0.2-rc1.tar.gz
+          gpg --armor --sign --detach-sig base-3.15.7-rc1.tar.gz
           </tt></blockquote>
         </td>
       </tr>
@@ -177,9 +175,8 @@ made.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Website Manager</td>
-      <td>Copy the tarfile and its signature to the Base download area of the
-        website and add the new files to the website Base download index
-        page.</td>
+      <td>If necessary recreate the tarfile following the instructions above.
+        Copy the tar file to the Base download area of the website</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -196,6 +193,11 @@ made.</p>
         versions should use the page and URL for the final release version
         number.</td>
       </tr>
+    <tr>
+      <td>&nbsp;</td>
+      <td>Website Manager</td>
+      <td>Add the new tar file to the website Base download index page.</td>
+      </tr>
     <tr>
       <th colspan="3">Testing</th>
       </tr>
@@ -231,7 +233,7 @@ made.</p>
       <td>&nbsp;</td>
       <td>Application Developers</td>
       <td>Build external applications against this version of Base on all
-        available platforms and test as appropriate. Application code changes
+        available platforms and test as appropriate.  Application code changes
         may be necessary where the EPICS Base APIs have been modified.</td>
       </tr>
     <tr>
@@ -247,7 +249,6 @@ made.</p>
           </ul>
         </td>
       </tr>
-
     <tr>
       <th colspan="3">Release Approval</th>
     </tr>
@@ -255,8 +256,8 @@ made.</p>
       <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Obtain a positive <q>Ok to release</q> from all platform developers
-        once a release candidate version has gone for 2 weeks without any major
-        new issues being reported.</td>
+        once a Release Candidate version has gone a whole week without any
+        issues being reported.</td>
       </tr>
     <tr>
       <th colspan="3">Creating the final release version</th>
@@ -264,50 +265,31 @@ made.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>
-        <p>For each external submodule, check if the module's release version
-          number (and SHRLIB_VERSION setting) has been updated if appropriate,
-          and that its Release Notes have been updated to cover any changes.
-          Commit any fixes and tag the module if that hasn't already been
-          done.</p>
-        <p>Update all external submodules on the Base-7.0 branch and
-          commit.</p></td>
+      <td>Edit and commit changes to the EPICS version number file
+        configure/CONFIG_BASE_VERSION.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Edit and commit changes to the EPICS Base version number file and
-        the embedded module version files:
-        <ul>
-          <li>configure/CONFIG_BASE_VERSION </li>
-          <li>modules/libcom/configure/CONFIG_LIBCOM_VERSION</li>
-          <li>modules/ca/configure/CONFIG_CA_VERSION</li>
-          <li>modules/database/configure/CONFIG_DATABASE_VERSION</li>
-          </ul></td>
-      </tr>
-    <tr>
-      <td>&nbsp;</td>
-      <td>Release Manager</td>
-      <td>Tag the epics-base module in Git:
+      <td>Tag the module in Git:
         <blockquote><tt>
-          cd base-7.0<br />
-          git tag -m 'ANJ: Tagged for 7.0.2' R7.0.2</i>
+          cd base-3.15<br />
+          git tag -m 'ANJ: Tagged for 3.15.7' R3.15.7
           </tt></blockquote>
-        Don't push the new tag to the Launchpad repository yet.</td>
+        </td>
       </tr>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Export the tagged version into a tarfile. The <tt>make-tar.sh</tt>
-        script generates a gzipped tarfile directly from the tag, excluding the
-        files and directories that are only used for continuous integration:
+      <td>Export the tagged version into a tarfile. Note that this command
+        generates a gzipped tarfile directly from the repository:
         <blockquote><tt>
-          cd base-7.0<br />
-          ./.tools/make-tar.sh R7.0.2 base-7.0.2.tar.gz base-7.0.2/
+          cd base-3.15<br />
+          git archive --prefix=base-3.15.7/ --output=base-3.15.7.tar.gz R3.15.7 configure documentation LICENSE Makefile README src startup
           </tt></blockquote>
         Create a GPG signature file of the tarfile as follows:
         <blockquote><tt>
-          gpg --armor --sign --detach-sig base-7.0.2.tar.gz
+          gpg --armor --sign --detach-sig base-3.15.7.tar.gz
           </tt></blockquote>
         </td>
       </tr>
@@ -315,18 +297,12 @@ made.</p>
       <td>&nbsp;</td>
       <td>Release Manager</td>
       <td>Test the tar file by extracting its contents and building it on at
-        least one supported platform. When this succeeds the new git tag can be
-        pushed to the Launchpad repository:
-        <blockquote><tt>
-          git push --follow-tags upstream 7.0
-          </tt></blockquote>
-        </td>
+        least one supported platform</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
       <td>Release Manager</td>
-      <td>Copy the tarfile and its signature to the Base download area of the
-        website.</td>
+      <td>Upload the release tar file to the Launchpad download area.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>
@@ -340,8 +316,8 @@ made.</p>
     <tr>
       <td>&nbsp;</td>
       <td>Website Manager</td>
-      <td>Upload the tar file and its <tt>.asc</tt> signature file to the
-        Launchpad milestone for this release version.</td>
+      <td>Copy the tar file and its <tt>.asc</tt> signature file to the Base
+        download area of the website.</td>
       </tr>
     <tr>
       <td>&nbsp;</td>

modules/CONFIG_SITE.local

@@ -1,10 +0,0 @@
-#*************************************************************************
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# When building submodules, this should always be true:
-INSTALL_LOCATION = $(EPICS_BASE)
-
-# Stop submodules from installing their configuration files:
-CONFIG_INSTALLS =

modules/Makefile

@@ -1,58 +0,0 @@
-#*************************************************************************
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-TOP = ..
-include $(TOP)/configure/CONFIG
-
-# Submodules for bundle build
-SUBMODULES += libcom
-
-SUBMODULES += ca
-ca_DEPEND_DIRS = libcom
-
-SUBMODULES += database
-database_DEPEND_DIRS = ca
-
-SUBMODULES += pvData
-pvData_DEPEND_DIRS = libcom
-
-SUBMODULES += pvAccess
-pvAccess_DEPEND_DIRS = pvData database
-
-SUBMODULES += normativeTypes
-normativeTypes_DEPEND_DIRS = pvData
-
-SUBMODULES += pvaClient
-pvaClient_DEPEND_DIRS = pvAccess normativeTypes
-
-SUBMODULES += pvDatabase
-pvDatabase_DEPEND_DIRS = pvAccess
-
-SUBMODULES += pva2pva
-pva2pva_DEPEND_DIRS = pvAccess
-
-SUBMODULES += example
-example_DEPEND_DIRS = pva2pva pvaClient
-
-# Allow sites to add extra submodules
--include Makefile.local
-
-# Add only checked-out submodules to DIRS
-DIRS += $(subst /Makefile,,$(wildcard $(addsuffix /Makefile, $(SUBMODULES))))
-
-include $(TOP)/configure/RULES_DIRS
-
-INSTALL_LOCATION_ABS := $(abspath $(INSTALL_LOCATION))
-RELEASE_LOCAL := RELEASE.$(EPICS_HOST_ARCH).local
-
-# Ensure that RELEASE.<host>.local exists before doing anything else
-all host $(DIRS) $(ARCHS) $(ACTIONS) $(dirActionTargets) $(dirArchTargets) \
-    $(dirActionArchTargets) $(actionArchTargets): | $(RELEASE_LOCAL)
-
-$(RELEASE_LOCAL):
-	$(ECHO) Creating $@, EPICS_BASE = $(INSTALL_LOCATION_ABS)
-	@echo EPICS_BASE = $(INSTALL_LOCATION_ABS)> $@
-realclean:
-	$(RM) $(wildcard RELEASE.*.local)

modules/ca/.ci/travis-build.sh

@@ -1,21 +0,0 @@
-#!/bin/sh
-set -e -x
-
-# set RTEMS to eg. "4.9" or "4.10"
-# requires qemu, bison, flex, texinfo, install-info
-if [ -n "$RTEMS" ]
-then
-  # find local qemu-system-i386
-  export PATH="$HOME/.cache/qemu/usr/bin:$PATH"
-  echo -n "Using QEMU: "
-  type qemu-system-i386 || echo "Missing qemu"
-  EXTRA=RTEMS_QEMU_FIXUPS=YES
-fi
-
-make -j2 $EXTRA
-
-if [ "$TEST" != "NO" ]
-then
-  make -j2 tapfiles
-  make -s test-results
-fi

modules/ca/.ci/travis-prepare.sh

@@ -1,132 +0,0 @@
-#!/bin/sh
-set -e -x
-
-CURDIR="$PWD"
-
-QDIR="$HOME/.cache/qemu"
-
-if [ -n "$RTEMS" -a "$TEST" = "YES" ]
-then
-  git clone --quiet --branch vme --depth 10 https://github.com/mdavidsaver/qemu.git "$HOME/.build/qemu"
-  cd "$HOME/.build/qemu"
-
-  HEAD=`git log -n1 --pretty=format:%H`
-  echo "HEAD revision $HEAD"
-
-  [ -e "$HOME/.cache/qemu/built" ] && BUILT=`cat "$HOME/.cache/qemu/built"`
-  echo "Cached revision $BUILT"
-
-  if [ "$HEAD" != "$BUILT" ]
-  then
-    echo "Building QEMU"
-    git submodule --quiet update --init
-
-    install -d "$HOME/.build/qemu/build"
-    cd         "$HOME/.build/qemu/build"
-
-    "$HOME/.build/qemu/configure" --prefix="$HOME/.cache/qemu/usr" --target-list=i386-softmmu --disable-werror
-    make -j2
-    make install
-
-    echo "$HEAD" > "$HOME/.cache/qemu/built"
-  fi
-fi
-
-cd "$CURDIR"
-
-cat << EOF > configure/RELEASE.local
-EPICS_BASE=$HOME/.source/epics-base
-EOF
-
-install -d "$HOME/.source"
-cd "$HOME/.source"
-
-add_base_module() {
-  MODULE=$1
-  BRANCH=$2
-  ( cd epics-base/modules && \
-  git clone --quiet --depth 5 --branch "$MODULE"/"$BRANCH" https://github.com/${REPOBASE:-epics-base}/epics-base.git "$MODULE" && \
-  cd "$MODULE" && git log -n1 )
-}
-
-git clone --quiet --depth 5 --branch core/"${BRCORE:-master}" https://github.com/${REPOBASE:-epics-base}/epics-base.git epics-base
-( cd epics-base && git log -n1 )
-add_base_module libcom "${BRLIBCOM:-master}"
-
-EPICS_HOST_ARCH=`sh epics-base/startup/EpicsHostArch`
-
-# requires wine and g++-mingw-w64-i686
-if [ "$WINE" = "32" ]
-then
-  echo "Cross mingw32"
-  sed -i -e '/CMPLR_PREFIX/d' epics-base/configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw
-  cat << EOF >> epics-base/configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw
-CMPLR_PREFIX=i686-w64-mingw32-
-EOF
-  cat << EOF >> epics-base/configure/CONFIG_SITE
-CROSS_COMPILER_TARGET_ARCHS+=win32-x86-mingw
-EOF
-fi
-
-if [ "$STATIC" = "YES" ]
-then
-  echo "Build static libraries/executables"
-  cat << EOF >> epics-base/configure/CONFIG_SITE
-SHARED_LIBRARIES=NO
-STATIC_BUILD=YES
-EOF
-fi
-
-case "$CMPLR" in
-clang)
-  echo "Host compiler is clang"
-  cat << EOF >> epics-base/configure/os/CONFIG_SITE.Common.$EPICS_HOST_ARCH
-GNU         = NO
-CMPLR_CLASS = clang
-CC          = clang
-CCC         = clang++
-EOF
-
-  # hack
-  sed -i -e 's/CMPLR_CLASS = gcc/CMPLR_CLASS = clang/' epics-base/configure/CONFIG.gnuCommon
-
-  clang --version
-  ;;
-*)
-  echo "Host compiler is default"
-  gcc --version
-  ;;
-esac
-
-cat <<EOF >> epics-base/configure/CONFIG_SITE
-USR_CPPFLAGS += $USR_CPPFLAGS
-USR_CFLAGS += $USR_CFLAGS
-USR_CXXFLAGS += $USR_CXXFLAGS
-EOF
-
-# set RTEMS to eg. "4.9" or "4.10"
-# requires qemu, bison, flex, texinfo, install-info
-if [ -n "$RTEMS" ]
-then
-  echo "Cross RTEMS${RTEMS} for pc386"
-  install -d /home/travis/.cache
-  curl -L "https://github.com/mdavidsaver/rsb/releases/download/travis-20160306-2/rtems${RTEMS}-i386-trusty-20190306-2.tar.gz" \
-  | tar -C /home/travis/.cache -xj
-
-  sed -i -e '/^RTEMS_VERSION/d' -e '/^RTEMS_BASE/d' epics-base/configure/os/CONFIG_SITE.Common.RTEMS
-  cat << EOF >> epics-base/configure/os/CONFIG_SITE.Common.RTEMS
-RTEMS_VERSION=$RTEMS
-RTEMS_BASE=/home/travis/.cache/rtems${RTEMS}-i386
-EOF
-  cat << EOF >> epics-base/configure/CONFIG_SITE
-CROSS_COMPILER_TARGET_ARCHS+=RTEMS-pc386
-EOF
-
-  # find local qemu-system-i386
-  export PATH="$HOME/.cache/qemu/usr/bin:$PATH"
-  echo -n "Using QEMU: "
-  type qemu-system-i386 || echo "Missing qemu"
-  EXTRA=RTEMS_QEMU_FIXUPS=YES
-fi
-
-make -j2 -C epics-base $EXTRA

modules/ca/.travis.yml

@@ -1,26 +0,0 @@
-sudo: false
-dist: trusty
-language: c
-compiler:
-  - gcc
-addons:
-  apt:
-    packages:
-    - libreadline6-dev
-    - libncurses5-dev
-    - perl
-    - clang
-    - g++-mingw-w64-i686
-install:
- - ./.ci/travis-prepare.sh
-script:
- - ./.ci/travis-build.sh
-env:
- - BRCORE=master BRLIBCOM=master TEST=NO
- - CMPLR=clang TEST=NO
- - USR_CXXFLAGS=-std=c++11 TEST=NO
- - CMPLR=clang USR_CXXFLAGS=-std=c++11 TEST=NO
- - WINE=32 TEST=NO STATIC=YES
- - WINE=32 TEST=NO STATIC=NO
- - RTEMS=4.10 TEST=NO
- - RTEMS=4.9 TEST=NO

modules/ca/configure/CONFIG

@@ -1,28 +0,0 @@
-# CONFIG - Load build configuration data
-#
-# Do not make changes to this file!
-
-# Allow user to override where the build rules come from
-RULES = $(EPICS_BASE)
-
-# RELEASE files point to other application tops
-include $(TOP)/configure/RELEASE
--include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).Common
-ifdef T_A
--include $(TOP)/configure/RELEASE.Common.$(T_A)
--include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
-endif
-
-CONFIG = $(RULES)/configure
-include $(CONFIG)/CONFIG
-
-# Override the Base definition:
-INSTALL_LOCATION = $(TOP)
-
-# CONFIG_SITE files contain other build configuration settings
-include $(TOP)/configure/CONFIG_SITE
--include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
-ifdef T_A
- -include $(TOP)/configure/CONFIG_SITE.Common.$(T_A)
- -include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
-endif

modules/ca/configure/CONFIG_CA_MODULE

@@ -1,9 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2017 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# Libraries needed to link a host tool
-EPICS_BASE_HOST_LIBS = ca Com

modules/ca/configure/CONFIG_CA_VERSION

@@ -1,4 +0,0 @@
-EPICS_CA_MAJOR_VERSION = 4
-EPICS_CA_MINOR_VERSION = 13
-EPICS_CA_MAINTENANCE_VERSION = 3
-EPICS_CA_DEVELOPMENT_FLAG = 0

modules/ca/configure/CONFIG_SITE

@@ -1,42 +0,0 @@
-# CONFIG_SITE
-
-# Make any application-specific changes to the EPICS build
-#   configuration variables in this file.
-#
-# Host/target specific settings can be specified in files named
-#   CONFIG_SITE.$(EPICS_HOST_ARCH).Common
-#   CONFIG_SITE.Common.$(T_A)
-#   CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
-
-# CHECK_RELEASE controls the consistency checking of the support
-#   applications pointed to by the RELEASE* files.
-# Normally CHECK_RELEASE should be set to YES.
-# Set CHECK_RELEASE to NO to disable checking completely.
-# Set CHECK_RELEASE to WARN to perform consistency checking but
-#   continue building even if conflicts are found.
-CHECK_RELEASE = YES
-
-# Set this when you only want to compile this application
-#   for a subset of the cross-compiled target architectures
-#   that Base is built for.
-#CROSS_COMPILER_TARGET_ARCHS = vxWorks-ppc32
-
-# To install files into a location other than $(TOP) define
-#   INSTALL_LOCATION here.
-#INSTALL_LOCATION=</absolute/path/to/install/top>
-
-# Set this when the IOC and build host use different paths
-#   to the install location. This may be needed to boot from
-#   a Microsoft FTP server say, or on some NFS configurations.
-#IOCS_APPL_TOP = </IOC's/absolute/path/to/install/top>
-
-# For application debugging purposes, override the HOST_OPT and/
-#   or CROSS_OPT settings from base/configure/CONFIG_SITE
-#HOST_OPT = NO
-#CROSS_OPT = NO
-
-# These allow developers to override the CONFIG_SITE variable
-# settings without having to modify the configure/CONFIG_SITE
-# file itself.
--include $(TOP)/../CONFIG_SITE.local
--include $(TOP)/configure/CONFIG_SITE.local

modules/ca/configure/Makefile

@@ -1,15 +0,0 @@
-#*************************************************************************
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-TOP = ..
-
-include $(TOP)/configure/CONFIG
-
-TARGETS = $(CONFIG_TARGETS)
-CONFIGS += $(subst ../,,$(wildcard $(CONFIG_INSTALLS)))
-
-CFG += CONFIG_CA_MODULE
-CFG += CONFIG_CA_VERSION
-
-include $(TOP)/configure/RULES

modules/ca/configure/RELEASE

@@ -1,39 +0,0 @@
-# RELEASE - Location of external support modules
-#
-# IF YOU CHANGE ANY PATHS in this file or make API changes to
-# any modules it refers to, you should do a "make rebuild" in
-# this application's top level directory.
-#
-# The EPICS build process does not check dependencies against
-# any files from outside the application, so it is safest to
-# rebuild it completely if any modules it depends on change.
-#
-# Host- or target-specific settings can be given in files named
-#  RELEASE.$(EPICS_HOST_ARCH).Common
-#  RELEASE.Common.$(T_A)
-#  RELEASE.$(EPICS_HOST_ARCH).$(T_A)
-#
-# This file is parsed by both GNUmake and an EPICS Perl script,
-# so it may ONLY contain definititions of paths to other support
-# modules, variable definitions that are used in module paths,
-# and include statements that pull in other RELEASE files.
-# Variables may be used before their values have been set.
-# Build variables that are NOT used in paths should be set in
-# the CONFIG_SITE file.
-
-# Variables and paths to dependent modules:
-#MODULES = /path/to/modules
-#MYMODULE = $(MODULES)/my-module
-
-# If building the EPICS modules individually, set these:
-#EPICS_LIBCOM = $(MODULES)/libcom-3.17.0
-#EPICS_BASE = $(MODULES)/core-7.0.1
-
-# Set RULES here if you want to use build rules from elsewhere:
-#RULES = $(MODULES)/build-rules
-
-# These lines allow developers to override these RELEASE settings
-# without having to modify this file directly.
--include $(TOP)/../RELEASE.local
--include $(TOP)/../RELEASE.$(EPICS_HOST_ARCH).local
--include $(TOP)/configure/RELEASE.local

modules/ca/configure/RULES

@@ -1,6 +0,0 @@
-# RULES
-
-include $(CONFIG)/RULES
-
-# Library should be rebuilt because LIBOBJS may have changed.
-$(LIBNAME): ../Makefile

modules/ca/configure/RULES_DIRS

@@ -1,2 +0,0 @@
-#RULES_DIRS
-include $(CONFIG)/RULES_DIRS

modules/ca/configure/RULES_TOP

@@ -1,2 +0,0 @@
-#RULES_TOP
-include $(CONFIG)/RULES_TOP

modules/ca/src/Makefile

@@ -1,25 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2008 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# Copyright (c) 2002 The Regents of the University of California, as
-#     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
-#*************************************************************************
-
-TOP = ..
-include $(TOP)/configure/CONFIG
-
-# Channel Access Client
-
-DIRS += client
-
-DIRS += tools
-tools_DEPEND_DIRS = client
-
-DIRS += perl
-perl_DEPEND_DIRS = client
-
-DIRS += template
-
-include $(TOP)/configure/RULES_DIRS

modules/ca/src/client/caVersion.h

@@ -1,28 +0,0 @@
-/*************************************************************************\
-* Copyright (c) 2017 UChicago Argonne LLC, as Operator of Argonne
-*     National Laboratory.
-* EPICS BASE is distributed subject to a Software License Agreement found
-* in file LICENSE that is included with this distribution.
-\*************************************************************************/
-
-#ifndef CAVERSION_H
-#define CAVERSION_H
-
-#include <epicsVersion.h>
-#include <shareLib.h>
-
-#ifndef VERSION_INT
-#  define VERSION_INT(V,R,M,P) ( ((V)<<24) | ((R)<<16) | ((M)<<8) | (P))
-#endif
-
-/* include generated headers with:
- *   EPICS_CA_MAJOR_VERSION
- *   EPICS_CA_MINOR_VERSION
- *   EPICS_CA_MAINTENANCE_VERSION
- *   EPICS_CA_DEVELOPMENT_FLAG
- */
-#include "caVersionNum.h"
-
-#define CA_VERSION_INT VERSION_INT(EPICS_CA_MAJOR_VERSION, EPICS_CA_MINOR_VERSION, EPICS_CA_MAINTENANCE_VERSION, 0)
-
-#endif // CAVERSION_H

modules/ca/src/client/caVersionNum.h@

@@ -1,7 +0,0 @@
-#ifndef CAVERSION_H
-#  error include caVersion.h, not this header
-#endif
-#define EPICS_CA_MAJOR_VERSION @EPICS_CA_MAJOR_VERSION@
-#define EPICS_CA_MINOR_VERSION @EPICS_CA_MINOR_VERSION@
-#define EPICS_CA_MAINTENANCE_VERSION @EPICS_CA_MAINTENANCE_VERSION@
-#define EPICS_CA_DEVELOPMENT_FLAG @EPICS_CA_DEVELOPMENT_FLAG@

modules/ca/src/template/Makefile

@@ -1,17 +0,0 @@
-TOP=../..
-
-include $(TOP)/configure/CONFIG
-
-TEMPLATES_DIR = makeBaseApp
-
-TEMPLATES += top/caClientApp/Makefile
-TEMPLATES += top/caClientApp/caExample.c
-TEMPLATES += top/caClientApp/caMonitor.c
-
-TEMPLATES += top/caPerlApp/Makefile
-TEMPLATES += top/caPerlApp/cainfo.pl
-TEMPLATES += top/caPerlApp/caget.pl
-TEMPLATES += top/caPerlApp/caput.pl
-TEMPLATES += top/caPerlApp/camonitor.pl
-
-include $(TOP)/configure/RULES

modules/ca/src/template/top/caPerlApp/Makefile

@@ -1,17 +0,0 @@
-TOP=..
-
-include $(TOP)/configure/CONFIG
-#----------------------------------------
-#  ADD MACRO DEFINITIONS AFTER THIS LINE
-
-PERL_SCRIPTS += _APPNAME_ModuleDirs.pm
-
-PERL_SCRIPTS += cainfo.pl
-PERL_SCRIPTS += caput.pl
-PERL_SCRIPTS += caget.pl
-PERL_SCRIPTS += camonitor.pl
-
-include $(TOP)/configure/RULES
-#----------------------------------------
-#  ADD RULES AFTER THIS LINE
-

modules/database/.ci/travis-build.sh

@@ -1,21 +0,0 @@
-#!/bin/sh
-set -e -x
-
-# set RTEMS to eg. "4.9" or "4.10"
-# requires qemu, bison, flex, texinfo, install-info
-if [ -n "$RTEMS" ]
-then
-  # find local qemu-system-i386
-  export PATH="$HOME/.cache/qemu/usr/bin:$PATH"
-  echo -n "Using QEMU: "
-  type qemu-system-i386 || echo "Missing qemu"
-  EXTRA=RTEMS_QEMU_FIXUPS=YES
-fi
-
-make -j2 $EXTRA
-
-if [ "$TEST" != "NO" ]
-then
-  make -j2 tapfiles
-  make -s test-results
-fi

modules/database/.ci/travis-prepare.sh

@@ -1,133 +0,0 @@
-#!/bin/sh
-set -e -x
-
-CURDIR="$PWD"
-
-QDIR="$HOME/.cache/qemu"
-
-if [ -n "$RTEMS" -a "$TEST" = "YES" ]
-then
-  git clone --quiet --branch vme --depth 10 https://github.com/mdavidsaver/qemu.git "$HOME/.build/qemu"
-  cd "$HOME/.build/qemu"
-
-  HEAD=`git log -n1 --pretty=format:%H`
-  echo "HEAD revision $HEAD"
-
-  [ -e "$HOME/.cache/qemu/built" ] && BUILT=`cat "$HOME/.cache/qemu/built"`
-  echo "Cached revision $BUILT"
-
-  if [ "$HEAD" != "$BUILT" ]
-  then
-    echo "Building QEMU"
-    git submodule --quiet update --init
-
-    install -d "$HOME/.build/qemu/build"
-    cd         "$HOME/.build/qemu/build"
-
-    "$HOME/.build/qemu/configure" --prefix="$HOME/.cache/qemu/usr" --target-list=i386-softmmu --disable-werror
-    make -j2
-    make install
-
-    echo "$HEAD" > "$HOME/.cache/qemu/built"
-  fi
-fi
-
-cd "$CURDIR"
-
-cat << EOF > configure/RELEASE.local
-EPICS_BASE=$HOME/.source/epics-base
-EOF
-
-install -d "$HOME/.source"
-cd "$HOME/.source"
-
-add_base_module() {
-  MODULE=$1
-  BRANCH=$2
-  ( cd epics-base/modules && \
-  git clone --quiet --depth 5 --branch "$MODULE"/"$BRANCH" https://github.com/${REPOBASE:-epics-base}/epics-base.git "$MODULE" && \
-  cd "$MODULE" && git log -n1 )
-}
-
-git clone --quiet --depth 5 --branch core/"${BRCORE:-master}" https://github.com/${REPOBASE:-epics-base}/epics-base.git epics-base
-( cd epics-base && git log -n1 )
-add_base_module libcom "${BRLIBCOM:-master}"
-add_base_module ca "${BRCA:-master}"
-
-EPICS_HOST_ARCH=`sh epics-base/startup/EpicsHostArch`
-
-# requires wine and g++-mingw-w64-i686
-if [ "$WINE" = "32" ]
-then
-  echo "Cross mingw32"
-  sed -i -e '/CMPLR_PREFIX/d' epics-base/configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw
-  cat << EOF >> epics-base/configure/os/CONFIG_SITE.linux-x86.win32-x86-mingw
-CMPLR_PREFIX=i686-w64-mingw32-
-EOF
-  cat << EOF >> epics-base/configure/CONFIG_SITE
-CROSS_COMPILER_TARGET_ARCHS+=win32-x86-mingw
-EOF
-fi
-
-if [ "$STATIC" = "YES" ]
-then
-  echo "Build static libraries/executables"
-  cat << EOF >> epics-base/configure/CONFIG_SITE
-SHARED_LIBRARIES=NO
-STATIC_BUILD=YES
-EOF
-fi
-
-case "$CMPLR" in
-clang)
-  echo "Host compiler is clang"
-  cat << EOF >> epics-base/configure/os/CONFIG_SITE.Common.$EPICS_HOST_ARCH
-GNU         = NO
-CMPLR_CLASS = clang
-CC          = clang
-CCC         = clang++
-EOF
-
-  # hack
-  sed -i -e 's/CMPLR_CLASS = gcc/CMPLR_CLASS = clang/' epics-base/configure/CONFIG.gnuCommon
-
-  clang --version
-  ;;
-*)
-  echo "Host compiler is default"
-  gcc --version
-  ;;
-esac
-
-cat <<EOF >> epics-base/configure/CONFIG_SITE
-USR_CPPFLAGS += $USR_CPPFLAGS
-USR_CFLAGS += $USR_CFLAGS
-USR_CXXFLAGS += $USR_CXXFLAGS
-EOF
-
-# set RTEMS to eg. "4.9" or "4.10"
-# requires qemu, bison, flex, texinfo, install-info
-if [ -n "$RTEMS" ]
-then
-  echo "Cross RTEMS${RTEMS} for pc386"
-  install -d /home/travis/.cache
-  curl -L "https://github.com/mdavidsaver/rsb/releases/download/travis-20160306-2/rtems${RTEMS}-i386-trusty-20190306-2.tar.gz" \
-  | tar -C /home/travis/.cache -xj
-
-  sed -i -e '/^RTEMS_VERSION/d' -e '/^RTEMS_BASE/d' epics-base/configure/os/CONFIG_SITE.Common.RTEMS
-  cat << EOF >> epics-base/configure/os/CONFIG_SITE.Common.RTEMS
-RTEMS_VERSION=$RTEMS
-RTEMS_BASE=/home/travis/.cache/rtems${RTEMS}-i386
-EOF
-  cat << EOF >> epics-base/configure/CONFIG_SITE
-CROSS_COMPILER_TARGET_ARCHS+=RTEMS-pc386
-EOF
-
-  # find local qemu-system-i386
-  export PATH="$HOME/.cache/qemu/usr/bin:$PATH"
-  echo -n "Using QEMU: "
-  type qemu-system-i386 || echo "Missing qemu"
-  EXTRA=RTEMS_QEMU_FIXUPS=YES
-fi
-
-make -j2 -C epics-base $EXTRA

modules/database/.travis.yml

@@ -1,26 +0,0 @@
-sudo: false
-dist: trusty
-language: c
-compiler:
-  - gcc
-addons:
-  apt:
-    packages:
-    - libreadline6-dev
-    - libncurses5-dev
-    - perl
-    - clang
-    - g++-mingw-w64-i686
-install:
- - ./.ci/travis-prepare.sh
-script:
- - ./.ci/travis-build.sh
-env:
- - BRCORE=master BRLIBCOM=master BRCA=master
- - CMPLR=clang
- - USR_CXXFLAGS=-std=c++11
- - CMPLR=clang USR_CXXFLAGS=-std=c++11
- - WINE=32 TEST=NO STATIC=YES
- - WINE=32 TEST=NO STATIC=NO
- - RTEMS=4.10 TEST=NO
- - RTEMS=4.9 TEST=NO

modules/database/Makefile

@@ -1,19 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
-#     National Laboratory.
-# Copyright (c) 2002 The Regents of the University of California, as
-#     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-TOP = .
-include $(TOP)/configure/CONFIG
-
-DIRS += configure src
-src_DEPEND_DIRS = configure
-
-DIRS += test
-test_DEPEND_DIRS = src
-
-include $(TOP)/configure/RULES_TOP

modules/database/configure/CONFIG

@@ -1,36 +0,0 @@
-# CONFIG - Load build configuration data
-#
-# Do not make changes to this file!
-
-# Allow user to override where the build rules come from
-RULES = $(EPICS_BASE)
-
-# RELEASE files point to other application tops
-include $(TOP)/configure/RELEASE
--include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).Common
-ifdef T_A
--include $(TOP)/configure/RELEASE.Common.$(T_A)
--include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
-endif
-
-BUILDING_DATABASE = DEFINED
-
-CONFIG = $(RULES)/configure
-include $(CONFIG)/CONFIG
-
-# Override the Base definition:
-INSTALL_LOCATION = $(TOP)
-
-# Use new RSET definition
-BASE_CPPFLAGS += -DUSE_TYPED_RSET
-
-# Shared library ABI version.
-SHRLIB_VERSION = $(EPICS_DATABASE_MAJOR_VERSION).$(EPICS_DATABASE_MINOR_VERSION).$(EPICS_DATABASE_MAINTENANCE_VERSION)
-
-# CONFIG_SITE files contain other build configuration settings
-include $(TOP)/configure/CONFIG_SITE
--include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
-ifdef T_A
- -include $(TOP)/configure/CONFIG_SITE.Common.$(T_A)
- -include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
-endif