Update version numbers

Also contains some reformatting in README.md

.ci/checkout-modules.sh

@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# Checkout submodules on their appropriate branches
-#
-
-git submodule foreach '\
-    git checkout `git config -f $toplevel/.gitmodules submodule.$name.branch` && \
-    git pull '

.gitattributes

@@ -1,5 +0,0 @@
-.ci/          export-ignore
-.tools/       export-ignore
-.appveyor.yml export-ignore
-.travis.yml   export-ignore
-README        export-subst

.gitignore

@@ -7,8 +7,6 @@
 /include/
 /templates/
 /configure/*.local
-/modules/RELEASE.*.local
-/modules/Makefile.local
 O.*/
 /QtC-*
 *.orig

.gitmodules

@@ -1,27 +0,0 @@
-[submodule "modules/pvData"]
-    path = modules/pvData
-    url = https://github.com/epics-base/pvDataCPP
-    branch = master
-[submodule "modules/pvAccess"]
-    path = modules/pvAccess
-    url = https://github.com/epics-base/pvAccessCPP
-    branch = master
-[submodule "modules/normativeTypes"]
-    path = modules/normativeTypes
-    url = https://github.com/epics-base/normativeTypesCPP
-    branch = master
-[submodule "modules/pvaClient"]
-    path = modules/pvaClient
-    url = https://github.com/epics-base/pvaClientCPP
-    branch = master
-[submodule "modules/pvDatabase"]
-    path = modules/pvDatabase
-    url = https://github.com/epics-base/pvDatabaseCPP
-    branch = master
-[submodule "modules/pva2pva"]
-    path = modules/pva2pva
-    url = https://github.com/epics-base/pva2pva
-    branch = master
-[submodule "modules/pcas"]
-	path = modules/pcas
-	url = https://github.com/epics-modules/pcas

.tools/make-tar.sh

@@ -1,133 +0,0 @@
-#!/bin/sh
-#
-# Make tar for git repo w/ one level of sub modules.
-#
-set -e
-
-die() {
-  echo "$1" >&2
-  exit 1
-}
-
-TOPREV="$1"
-FINALTAR="$2"
-PREFIX="$3"
-
-if ! [ "$TOPREV" ]
-then
-   cat <<EOF >&2
-usage: $0 <rev> [<outfile> [<prefix>]]
-
-  <rev> may be any git revision spec. (tag, branch, or commit id).
-
-  If provided, <outfile> must end with ".tar", ".tar.gz" or ".tar.bz2".
-  If <outfile> is omitted, "base-<rev>.tar.gz" will be used.
-  If provided, <prefix> must end with "/".  If <prefix> is omitted,
-  the default is "base-<rev>/".
-EOF
-   exit 1
-fi
-
-case "$FINALTAR" in
-"")
-  TAROPT=-z
-  FINALTAR="base-$TOPREV.tar.gz"
-  ;;
-*.tar)
-  TAROPT=""
-  ;;
-*.tar.gz)
-  TAROPT=-z
-  ;;
-*.tar.bz2)
-  TAROPT=-j
-  ;;
-*)
-  die "outfile must end with '.tar.gz' or '.tar.bz2'"
-  ;;
-esac
-
-case "$PREFIX" in
-"")
-  PREFIX="base-$TOPREV/"
-  ;;
-*/)
-  ;;
-*)
-  die "Prefix must end with '/'"
-  ;;
-esac
-
-# Check for both <tag> and R<tag>
-if [ "$TOPREV" = "HEAD" ]
-then
-  true
-elif ! [ `git tag -l $TOPREV` ]
-then
-  if [ `git tag -l R$TOPREV` ]
-  then
-    TOPREV="R$TOPREV"
-  else
-    die "No tags exist '$TOPREV' or 'R$TOPREV'"
-  fi
-fi
-
-# temporary directory w/ automatic cleanup
-TDIR=`mktemp -d`
-trap 'rm -rf "$TDIR"' EXIT INT QUIT TERM
-
-mkdir "$TDIR"/tar
-
-echo "Exporting revision $TOPREV as $FINALTAR with prefix $PREFIX"
-
-# Use git-archive to copy files at the given revision into our temp. dir.
-# Respects 'export-exclude' in .gitattributes files.
-
-git archive --prefix=$PREFIX $TOPREV | tar -C "$TDIR"/tar -x
-
-# use ls-tree instead of submodule-foreach to capture submodule revision associated with supermodule rev.
-#
-# sub-modules appear in tree as eg.:
-#  160000 commit c3a6cfcf0dad4a4eeecf59b474710d06ff3eb68a  modules/ca
-git ls-tree -r $TOPREV | awk '/^[0-9]+ commit / {print $3, $4}' | \
-while read HASH MODDIR
-do
-    echo "Visiting $HASH $MODDIR"
-    git -C $MODDIR archive --prefix=${PREFIX}${MODDIR}/ $HASH | tar -C "$TDIR"/tar -x
-done
-
-# make a list of files copied and filter out undesirables
-
-(cd "$TDIR"/tar && find . -mindepth 1 -not -type d) > "$TDIR"/list.1
-
-# Remove leading ./ from filenames
-sed -i -e 's|^\./||' "$TDIR"/list.1
-
-# Exclude files
-sed \
-  -e '/\/\.\?ci\//d' \
-  -e '/\/\.tools\//d' \
-  -e '/\/jenkins\//d' \
-  -e '/\/\.git/d' \
-  -e '/\/\.project$/d' \
-  -e '/\/\.travis\.yml$/d' \
-  -e '/\/\.appveyor\.yml$/d' \
-  "$TDIR"/list.1 > "$TDIR"/list.2
-
-if ! diff -U 0 "$TDIR"/list.1 "$TDIR"/list.2
-then
-    echo "Excluding the files shown above"
-fi
-
-# Use the filtered list to build the final tar
-tar -c $TAROPT -C "$TDIR"/tar -T "$TDIR"/list.2 -f "$FINALTAR"
-
-echo "Wrote $FINALTAR"
-
-tar -t $TAROPT -f "$FINALTAR" > "$TDIR"/list.3
-
-# make sure we haven't picked up anything extra
-if ! diff -u "$TDIR"/list.2 "$TDIR"/list.3
-then
-    echo "Oops! Tarfile diff against plan shown above"
-fi

.travis.yml

@@ -3,6 +3,16 @@ dist: trusty
 language: c
 compiler:
   - gcc
+env:
+  - CMPLR=gcc
+  - CMPLR=gcc EXTRA=CMD_CXXFLAGS=-std=c++11
+  - CMPLR=gcc STATIC=YES
+  - CMPLR=clang
+  - CMPLR=clang STATIC=YES
+  - WINE=32 TEST=NO STATIC=YES
+  - WINE=32 TEST=NO STATIC=NO
+  - RTEMS=4.10 TEST=NO
+  - RTEMS=4.9 TEST=NO
 addons:
   apt:
     packages:
@@ -11,17 +21,12 @@ addons:
     - perl
     - clang
     - g++-mingw-w64-i686
-    - qemu-system-x86
-script:
-  - .ci/travis-build.sh
-env:
-  - CMPLR=gcc
-  - CMPLR=clang
-  - CMPLR=gcc   STATIC=YES
-  - CMPLR=clang STATIC=YES
-  - CMPLR=gcc   EXTRA=CMD_CXXFLAGS=-std=c++11
-  - CMPLR=clang EXTRA=CMD_CXXFLAGS=-std=c++11
-  - WINE=32 TEST=NO STATIC=YES
-  - WINE=32 TEST=NO STATIC=NO
-  - RTEMS=4.10 TEST=YES
-  - RTEMS=4.9  TEST=YES
+    - bison
+    - flex
+    - texinfo
+    - install-info
+cache:
+  directories:
+   - $HOME/.cache
+install: sh ci/travis-prepare.sh </dev/null
+script: sh ci/travis-build.sh </dev/null

Makefile

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 TOP = .
@@ -14,19 +14,8 @@ include $(TOP)/configure/CONFIG
 TOOLS = $(TOP)/src/tools
 
 DIRS += configure src
+
 src_DEPEND_DIRS = configure
 
-DIRS += test
-test_DEPEND_DIRS = src
-
-DIRS += modules
-modules_DEPEND_DIRS = src
-
 include $(TOP)/configure/RULES_TOP
 
-UNINSTALL_DIRS += $(INSTALL_LOCATION)/src
-copysrc:
-	tar cf - --exclude-vcs --exclude-backups --exclude=O.* modules/*/src | tar xf - -C $(INSTALL_LOCATION)
-
-tar:
-	tar cfjP epics_base-$(EPICS_VERSION_NUMBER).tar.bz2 $(INSTALL_LOCATION)

README

@@ -2,14 +2,14 @@
 EPICS Base - the central core of a control system toolkit
 ---------------------------------------------------------
 
-Copyright UChicago Argonne LLC, as Operator of Argonne
-National Laboratory.
+Copyright (c) 1991-2003 The University of Chicago, as Operator
+of Argonne National Laboratory.
 Copyright (c) 1991-2003 The Regents of the University of
 California, as Operator of Los Alamos National Laboratory.
 
-EPICS Base is distributed subject to a Software License
-Agreement found in the file LICENSE that is included with
-this distribution.
+EPICS Base Versions 3.13.7 and higher are distributed
+subject to a Software License Agreement found in the
+file LICENSE that is included with this distribution.
 
 ---------------------------------------------------------
 
@@ -22,6 +22,3 @@ training materials, additional components, links to other
 websites etc. is available on the EPICS home page at
 	https://epics.anl.gov/
 
-$Format:%cD$
-$Format:%H$
-https://code.launchpad.net/epics-base

appveyor.yml

@@ -16,7 +16,7 @@ init:
   - git config --global core.autocrlf true
 
 # Set clone depth (do not fetch complete history)
-clone_depth: 50
+clone_depth: 2
 
 # Skipping commits affecting only specific files
 skip_commits:
@@ -46,7 +46,6 @@ environment:
   - TOOLCHAIN: 14.0
   - APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2017
     TOOLCHAIN: 2017
-  - TOOLCHAIN: cygwin
   - TOOLCHAIN: mingw
     APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2015
 
@@ -61,9 +60,6 @@ matrix:
   # VS Express installs don't have the 64 bit compiler
   - platform: x64
     TOOLCHAIN: 10.0
-  # Cygwin static-debug has compiler problems
-  - configuration: static-debug
-    TOOLCHAIN: cygwin
 
 
 #---------------------------------#
@@ -71,14 +67,13 @@ matrix:
 #---------------------------------#
 
 install:
-  - cmd: git submodule update --init --recursive
-  - cmd: .ci/appveyor-prepare.bat
+  - cmd: ci/appveyor-prepare.bat
 
 build_script:
-  - cmd: .ci/appveyor-make.bat
+  - cmd: ci/appveyor-make.bat
 
 test_script:
-  - cmd: .ci/appveyor-make.bat runtests
+  - cmd: ci/appveyor-make.bat runtests
 
 #---------------------------------#
 #         notifications           #

ci/appveyor-make.bat

@@ -1,6 +1,6 @@
 :: Universal build script for AppVeyor (https://ci.appveyor.com/)
 :: Environment:
-::     TOOLCHAIN      -  toolchain version   [10.0/11.0/12.0/14.0/2017/cygwin/mingw]
+::     TOOLCHAIN      -  toolchain version   [10.0/11.0/12.0/14.0/2017/mingw]
 ::     CONFIGURATION  -  determines EPICS build   [dynamic/static]
 ::     PLATFORM       -  architecture   [x86/x64]
 ::
@@ -20,24 +20,6 @@ echo [INFO] Platform: %OS%
 set "MAKEARGS=-j2 -Otarget"
 if "%APPVEYOR_REPO_BRANCH%"=="3.14" set MAKEARGS=
 
-if "%TOOLCHAIN%"=="cygwin" (
-    set "MAKE=make"
-    if "%OS%"=="64BIT" (
-        set "EPICS_HOST_ARCH=cygwin-x86_64"
-        set "INCLUDE=C:\cygwin64\include;%INCLUDE%"
-        set "PATH=C:\cygwin64\bin;%PATH%"
-        echo [INFO] Cygwin Toolchain 64bit
-    ) else (
-        set "EPICS_HOST_ARCH=cygwin-x86"
-        set "INCLUDE=C:\cygwin\include;%INCLUDE%"
-        set "PATH=C:\cygwin\bin;%PATH%"
-        echo [INFO] Cygwin Toolchain 32bit
-    )
-    echo [INFO] Compiler Version
-    gcc -v
-    goto Finish
-)
-
 if "%TOOLCHAIN%"=="mingw" (
     set "MAKE=mingw32-make"
     if "%OS%"=="64BIT" (

ci/appveyor-prepare.bat

@@ -1,12 +1,12 @@
 :: Build script for AppVeyor (https://ci.appveyor.com/)
 :: Environment:
-::     TOOLCHAIN      -  Toolchain Version  [9.0/10.0/11.0/12.0/14.0/cygwin/mingw]
+::     TOOLCHAIN      -  Toolchain Version  [9.0/10.0/11.0/12.0/14.0/mingw]
 ::     CONFIGURATION  -  determines EPICS build  [dynamic/static, -debug]
 ::     PLATFORM       -  "x86" -> use 32bit architecture
 ::
 :: Prepares an Appveyor build by excuting the following steps
 ::     - Set up configure\CONFIG_SITE for static vs. dynamic build
-::     - Install Cygwin / Mingw  (TOOLCHAIN setting) in the in the appropriate flavor
+::     - Install Mingw  (TOOLCHAIN setting) in the in the appropriate flavor
 ::     - Download and install Make-4.1 from EPICS download page
 
 Setlocal EnableDelayedExpansion
@@ -16,31 +16,6 @@ if "%PLATFORM%"=="x86" set OS=32BIT
 
 echo [INFO] Platform: %OS%
 
-if "%TOOLCHAIN%"=="cygwin" (
-    echo.%CONFIGURATION% | findstr /C:"static">nul && (
-        echo SHARED_LIBRARIES=NO>> configure\CONFIG_SITE
-        echo STATIC_BUILD=YES>> configure\CONFIG_SITE
-        echo [INFO] EPICS set up for static build
-    ) || (
-        echo [INFO] EPICS set up for dynamic build
-    )
-    echo.%CONFIGURATION% | findstr /C:"debug">nul && (
-        echo HOST_OPT=NO>> configure\CONFIG_SITE
-        echo [INFO] EPICS set up for debug build
-    ) || (
-        echo [INFO] EPICS set up for optimized build
-    )
-    if "%OS%"=="64BIT" (
-        echo [INFO] Installing Cygwin 64bit and dependencies
-        @powershell -Command "(new-object net.webclient).DownloadFile('http://www.cygwin.com/setup-x86_64.exe', 'C:\cygwin64\setup-x86_64.exe')"
-        C:\cygwin64\setup-x86_64.exe -q -P "libreadline-devel,libncursesw-devel"
-    ) else (
-        echo [INFO] Installing Cygwin 32bit and dependencies
-        @powershell -Command "(new-object net.webclient).DownloadFile('http://www.cygwin.com/setup-x86.exe', 'C:\cygwin\setup-x86.exe')"
-        C:\cygwin\setup-x86.exe -q -P "libreadline-devel,libncursesw-devel"
-    )
-)
-
 if "%TOOLCHAIN%"=="mingw" (
     echo.%CONFIGURATION% | findstr /C:"static">nul && (
         echo SHARED_LIBRARIES=NO>> configure\CONFIG_SITE

ci/travis-build.sh

@@ -6,9 +6,18 @@ die() {
   exit 1
 }
 
+ticker() {
+  while true
+  do
+    sleep 60
+    date -R
+    [ -r "$1" ] && tail -n10 "$1"
+  done
+}
+
 CACHEKEY=1
 
-export EPICS_HOST_ARCH=`perl src/tools/EpicsHostArch.pl`
+EPICS_HOST_ARCH=`perl src/tools/EpicsHostArch.pl`
 
 [ -e configure/os/CONFIG_SITE.Common.linux-x86 ] || die "Wrong location: $PWD"
 
@@ -48,30 +57,34 @@ EOF
 fi
 
 # set RTEMS to eg. "4.9" or "4.10"
+# requires qemu, bison, flex, texinfo, install-info
 if [ -n "$RTEMS" ]
 then
   echo "Cross RTEMS${RTEMS} for pc386"
-  curl -L "https://github.com/mdavidsaver/rsb/releases/download/20171203-${RTEMS}/i386-rtems${RTEMS}-trusty-20171203-${RTEMS}.tar.bz2" \
-  | tar -C / -xmj
+  install -d /home/travis/.cache
+  curl -L "https://github.com/mdavidsaver/rsb/releases/download/travis-20160306-2/rtems${RTEMS}-i386-trusty-20190306-2.tar.gz" \
+  | tar -C /home/travis/.cache -xj
 
   sed -i -e '/^RTEMS_VERSION/d' -e '/^RTEMS_BASE/d' configure/os/CONFIG_SITE.Common.RTEMS
   cat << EOF >> configure/os/CONFIG_SITE.Common.RTEMS
 RTEMS_VERSION=$RTEMS
-RTEMS_BASE=$HOME/.rtems
+RTEMS_BASE=/home/travis/.cache/rtems${RTEMS}-i386
 EOF
   cat << EOF >> configure/CONFIG_SITE
-CROSS_COMPILER_TARGET_ARCHS += RTEMS-pc386-qemu
+CROSS_COMPILER_TARGET_ARCHS+=RTEMS-pc386
 EOF
 
   # find local qemu-system-i386
+  export PATH="$HOME/.cache/qemu/usr/bin:$PATH"
   echo -n "Using QEMU: "
   type qemu-system-i386 || echo "Missing qemu"
+  EXTRA=RTEMS_QEMU_FIXUPS=YES
 fi
 
 make -j2 $EXTRA
 
 if [ "$TEST" != "NO" ]
 then
-   make -j2 tapfiles
+   make tapfiles
    make -s test-results
 fi

ci/travis-prepare.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+set -e -x
+
+die() {
+  echo "$1" >&2
+  exit 1
+}
+
+CURDIR="$PWD"
+
+QDIR="$HOME/.cache/qemu"
+
+if [ -n "$RTEMS" -a "$TEST" = "YES" ]
+then
+  git clone --quiet --branch vme --depth 10 https://github.com/mdavidsaver/qemu.git "$HOME/.build/qemu"
+  cd "$HOME/.build/qemu"
+
+  HEAD=`git log -n1 --pretty=format:%H`
+  echo "HEAD revision $HEAD"
+
+  [ -e "$HOME/.cache/qemu/built" ] && BUILT=`cat "$HOME/.cache/qemu/built"`
+  echo "Cached revision $BUILT"
+
+  if [ "$HEAD" != "$BUILT" ]
+  then
+    echo "Building QEMU"
+    git submodule --quiet update --init
+
+    install -d "$HOME/.build/qemu/build"
+    cd         "$HOME/.build/qemu/build"
+
+    "$HOME/.build/qemu/configure" --prefix="$HOME/.cache/qemu/usr" --target-list=i386-softmmu --disable-werror
+    make -j2
+    make install
+
+    echo "$HEAD" > "$HOME/.cache/qemu/built"
+  fi
+fi
+
+cd "$CURDIR"

configure/CONFIG.gnuCommon

@@ -24,30 +24,23 @@ LD = $(GNU_BIN)/$(CMPLR_PREFIX)ld$(CMPLR_SUFFIX) -r
 CPP = $(CC) -x c -E
 RANLIB = $(GNU_BIN)/$(CMPLR_PREFIX)ranlib$(CMPLR_SUFFIX)
 
-# Requires at least GCC 4.8 or LLVM (clang) 3.1
-ASAN_FLAGS_YES = -fsanitize=address
-ASAN_LDFLAGS_YES = $(ASAN_FLAGS_YES)
-
 PROF_CFLAGS_YES = -p
 GPROF_CFLAGS_YES = -pg
 CODE_CFLAGS = $(PROF_CFLAGS_$(PROFILE)) $(GPROF_CFLAGS_$(GPROF))
-CODE_CFLAGS += $(ASAN_FLAGS_$(ENABLE_ASAN))
 WARN_CFLAGS_YES = -Wall
 WARN_CFLAGS_NO = -w
-OPT_CFLAGS_YES = -O3 -g
+OPT_CFLAGS_YES = -O3
 OPT_CFLAGS_NO = -g
 
 PROF_CXXFLAGS_YES = -p
 GPROF_CXXFLAGS_YES = -pg
 CODE_CXXFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))
-CODE_CXXFLAGS += $(ASAN_FLAGS_$(ENABLE_ASAN))
 WARN_CXXFLAGS_YES = -Wall
 WARN_CXXFLAGS_NO = -w
-OPT_CXXFLAGS_YES = -O3 -g
+OPT_CXXFLAGS_YES = -O3
 OPT_CXXFLAGS_NO = -g
 
 CODE_LDFLAGS = $(PROF_CXXFLAGS_$(PROFILE)) $(GPROF_CXXFLAGS_$(GPROF))
-CODE_LDFLAGS += $(ASAN_LDFLAGS_$(ENABLE_ASAN))
 
 PIPE_CFLAGS_YES_YES = -pipe
 PIPE_CFLAGS = $(PIPE_CFLAGS_$(GCC_PIPE)_$(GNU))

configure/CONFIG_ADDONS

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
 #	check for add-on CFLAGS and CXXFLAGS
@@ -37,6 +37,9 @@
 #    PROD_LIBS     libs needed by PROD and TESTPROD
 #    LIB_LIBS      libs needed by shared LIBRARY
 #    SHRLIB_LIBS   libs needed by shared LIBRARY
+#    USR_OBJLIBS   R3.13 vxWorks object libs needed building libraries and prods
+#    PROD_OBJLIBS  R3.13 vxWorks object    libs needed for building prods
+#    LIB_OBJLIBS   R3.13 vxWorks object libs needed for building libraries
 #    USR_SYS_LIBS  system libs needed building libraries and prods
 #    PROD_SYS_LIBS system libs needed for building prods
 #    LIB_SYS_LIBS  system libs needed for building libraries
@@ -270,6 +273,30 @@ OBJS_HOST+=$(OBJS_HOST_DEFAULT)
 endif
 endif
 
+ifneq ($(strip $(PROD_OBJLIBS_$(OS_CLASS))),)
+PROD_OBJLIBS+=$(subst -nil-,,$(PROD_OBJLIBS_$(OS_CLASS)))
+else
+ifdef PROD_OBJLIBS_DEFAULT
+PROD_OBJLIBS+=$(PROD_OBJLIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(LIB_OBJLIBS_$(OS_CLASS))),)
+LIB_OBJLIBS+=$(subst -nil-,,$(LIB_OBJLIBS_$(OS_CLASS)))
+else
+ifdef LIB_OBJLIBS_DEFAULT
+LIB_OBJLIBS+=$(LIB_OBJLIBS_DEFAULT)
+endif
+endif
+
+ifneq ($(strip $(USR_OBJLIBS_$(OS_CLASS))),)
+USR_OBJLIBS+=$(subst -nil-,,$(USR_OBJLIBS_$(OS_CLASS)))
+else
+ifdef USR_OBJLIBS_DEFAULT
+USR_OBJLIBS+=$(USR_OBJLIBS_DEFAULT)
+endif
+endif
+
 ifneq ($(strip $(LIB_OBJS_$(OS_CLASS))),)
 LIB_OBJS+=$(subst -nil-,,$(LIB_OBJS_$(OS_CLASS)))
 else
@@ -554,3 +581,4 @@ ifdef LIB_RCS_DEFAULT
 LIB_RCS+=$(LIB_RCS_DEFAULT)
 endif
 endif
+

configure/CONFIG_BASE

@@ -3,12 +3,13 @@
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 #---------------------------------------------------------------
-# EPICS Base directories
+# Epics base directories
 
 EPICS_BASE_HOST_BIN = $(EPICS_BASE)/bin/$(EPICS_HOST_ARCH)
 EPICS_BASE_HOST_LIB = $(EPICS_BASE)/lib/$(EPICS_HOST_ARCH)
@@ -17,6 +18,17 @@ ifdef T_A
   EPICS_BASE_BIN    = $(EPICS_BASE)/bin/$(T_A)
 endif
 
+#---------------------------------------------------------------
+# Epics base Ioc libraries 
+
+EPICS_BASE_IOC_LIBS += dbRecStd dbCore ca Com 
+
+#---------------------------------------------------------------
+# Epics base Host libraries 
+
+EPICS_BASE_HOST_LIBS += cas gdd
+EPICS_BASE_HOST_LIBS += ca Com
+
 #---------------------------------------------------------------
 # Version number for base shared libraries (and win32 products)
 
@@ -27,36 +39,81 @@ ifdef BASE_TOP
   PROD_VERSION = $(EPICS_VERSION).$(EPICS_REVISION)
 endif # BASE_TOP
 
+#---------------------------------------------------------------
+# Base c preprocessor flags
+
+BASE_CPPFLAGS = 
+
+# osithread default stack
+OSITHREAD_USE_DEFAULT_STACK = NO
+OSITHREAD_DEFAULT_STACK_FLAGS_YES = -DOSITHREAD_USE_DEFAULT_STACK
+OSITHREAD_DEFAULT_STACK_FLAGS_NO =
+BASE_CPPFLAGS += $(OSITHREAD_DEFAULT_STACK_FLAGS_$(OSITHREAD_USE_DEFAULT_STACK))
+
 #---------------------------------------------------------------
 # Where to find the installed build tools
 #   Windows does not like commands with relative paths starting ../
-#   so TOOLS must be an absolute path, although Perl scripts are OK.
-#   FIND_TOOL is for scripts run before the build reaches src/tools.
+#   but the Perl scripts in TOP/src/tools are OK
 
 TOOLS = $(abspath $(EPICS_BASE_HOST_BIN))
-FIND_TOOL = $(firstword $(wildcard $(TOOLS)/$(1) $(EPICS_BASE)/src/tools/$(1)))
+FIND_TOOL = $(firstword $(wildcard $(TOOLS)/$(1) $(TOP)/src/tools/$(1)))
 
 #---------------------------------------------------------------
-# EPICS Base build tools and tool flags
+# Epics base build tools and tool flags
 
-PODTOHTML        = $(PERL) $(TOOLS)/podToHtml.pl
-CONVERTRELEASE   = $(PERL) $(call FIND_TOOL,convertRelease.pl)
-FULLPATHNAME     = $(PERL) $(TOOLS)/fullPathName.pl
-TAPTOJUNIT       = $(PERL) $(TOOLS)/tap-to-junit-xml.pl
-GENVERSIONHEADER = $(PERL) $(TOOLS)/genVersionHeader.pl $(QUIET_FLAG) $(QUESTION_FLAG)
+MAKEBPT                    = $(TOOLS)/makeBpt$(HOSTEXE)
+DBEXPAND                   = $(PERL) $(TOOLS)/dbdExpand.pl
+DBTORECORDTYPEH            = $(PERL) $(TOOLS)/dbdToRecordtypeH.pl
+DBTOMENUH                  = $(PERL) $(TOOLS)/dbdToMenuH.pl
+REGISTERRECORDDEVICEDRIVER = $(PERL) $(TOOLS)/registerRecordDeviceDriver.pl
+CONVERTRELEASE             = $(PERL) $(call FIND_TOOL,convertRelease.pl)
+FULLPATHNAME               = $(PERL) $(TOOLS)/fullPathName.pl
+TAPTOJUNIT                 = $(PERL) $(TOOLS)/tap-to-junit-xml.pl
+PROVE                      = $(PERL) $(TOOLS)/epicsProve.pl
 
-#---------------------------------------------------------------
+#-------------------------------------------------------
 # tools for installing libraries and products
-INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(QUIET_FLAG)
+INSTALL_QUIETLY := $(if $(findstring s,$(MFLAGS)),-q,)
+INSTALL = $(PERL) $(TOOLS)/installEpics.pl $(INSTALL_QUIETLY)
 INSTALL_PRODUCT = $(INSTALL)
 INSTALL_LIBRARY = $(INSTALL)
 
 #---------------------------------------------------------------
-# tools for making header dependencies and variable replacement
-MKMF       = $(PERL) $(TOOLS)/mkmf.pl
-REPLACEVAR = $(PERL) $(TOOLS)/replaceVAR.pl
+# tools for making header dependancies and variable replacement
+MKMF                       = $(PERL) $(TOOLS)/mkmf.pl
+REPLACEVAR                 = $(PERL) $(TOOLS)/replaceVAR.pl
 
 #---------------------------------------------------------------
-# tools for cleaning out unwanted files
-CVSCLEAN = $(call FIND_TOOL,cvsclean.pl)
-DEPCLEAN = $(call FIND_TOOL,depclean.pl)
+# private versions of lex/yacc from EPICS
+EYACC = $(TOOLS)/antelope$(HOSTEXE)
+ELEX = $(TOOLS)/e_flex$(HOSTEXE) -S$(EPICS_BASE)/include/flex.skel.static
+
+YACC  = $(EYACC)
+LEX   = $(ELEX)
+
+#---------------------------------------------------------------
+# Our use of msi is incompatible with older versions
+
+MSI3_15 = $(EPICS_BASE_HOST_BIN)/msi
+
+#---------------------------------------------------------------
+# External tools and tool flags - must be in path or defined in application
+
+ADL2DL ?= adl2dl
+
+# sch2edif compiler and flags
+SCH2EDIF = sch2edif
+SCH2EDIF_PATH =
+SCH2EDIF_SYSFLAGS = -n -ap -p.+..+$(SCH2EDIF_PATH)+$(CAPFAST_TEMPLATES)/sym+
+SCH2EDIF_FLAGS =
+ 
+# e2db and flags
+#    - again there is an assumption where edb.def is installed.
+E2DB ?= e2db
+E2DB_SYSFLAGS = -ate -d $(CAPFAST_TEMPLATES)/edb.def
+E2DB_FLAGS =
+
+DBST ?= dbst
+
+
+

configure/CONFIG_BASE_VERSION

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# in the file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
 #  EPICS Version information
@@ -15,48 +15,25 @@
 # EPICS_SITE_VERSION is defined in CONFIG_SITE for sites that want a local
 # version number to be included in the reported version string.
 
-# We define convenience macros for our release series to be NO or YES, so
-# Makefiles can detect 'Series X or later', or 'Series X only' like this:
-#
-#   ifdef BASE_3_14
-#       true for 3.14 or later
-#   ifdef BASE_3_15
-#       true for 3.15 or later
-#   ifdef BASE_3_16
-#       true for 3.16 or later
-#   ifdef BASE_7_0
-#       true for 7.0 or later
-#
-#   ifeq ($(BASE_3_14),YES)
-#       true for 3.14.x only
-#   ifeq ($(BASE_3_15),YES)
-#       true for 3.15.x only
-#   ifeq ($(BASE_3_16),YES)
-#       true for 3.16.x only.
-#   ifeq ($(BASE_7_0),YES)
-#       true for 7.0.x only.
-
+# In 3.15 we still define BASE_3_14 so "ifdef BASE_3_14" means
+# 3.14 or later, but "ifeq ($(BASE_3_14),YES)" means 3.14 only.
 BASE_3_14 = NO
-BASE_3_15 = NO
-BASE_3_16 = NO
-BASE_7_0  = YES
+BASE_3_15 = YES
 
 # EPICS_VERSION must be a number >0 and <256
-EPICS_VERSION = 7
+EPICS_VERSION = 3
 
 # EPICS_REVISION must be a number >=0 and <256
-EPICS_REVISION = 0
+EPICS_REVISION = 15
 
 # EPICS_MODIFICATION must be a number >=0 and <256
-EPICS_MODIFICATION = 3
+EPICS_MODIFICATION = 7
 
 # EPICS_PATCH_LEVEL must be a number (win32 resource file requirement)
-# Not included in the official EPICS version number if zero
+# Not included if zero
 EPICS_PATCH_LEVEL = 0
 
-# Between official releases, the EPICS_PATCH_LEVEL gets incremented
-# and a -DEV suffix is added (similar to the Maven -SNAPSHOT versions)
-EPICS_DEV_SNAPSHOT=
+# This will end in -DEV between official releases
 #EPICS_DEV_SNAPSHOT=-DEV
 #EPICS_DEV_SNAPSHOT=-pre1
 #EPICS_DEV_SNAPSHOT=-pre1-DEV
@@ -66,6 +43,7 @@ EPICS_DEV_SNAPSHOT=
 #EPICS_DEV_SNAPSHOT=-rc1-DEV
 #EPICS_DEV_SNAPSHOT=-rc2
 #EPICS_DEV_SNAPSHOT=-rc2-DEV
+EPICS_DEV_SNAPSHOT=
 
 # No changes should be needed below here
 

configure/CONFIG_COMMON

@@ -4,7 +4,7 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 #
 #  CONFIG_COMMON
@@ -38,6 +38,10 @@ BUILD_ARCHS = $(EPICS_HOST_ARCH) $(CROSS1) $(CROSS2)
 # otherwise override this in os/CONFIG_SITE.<host_arch>.Common
 PERL = perl -CSD
 
+#-------------------------------------------------------
+# dbst based database optimization default
+DB_OPT = NO
+
 #-------------------------------------------------------
 # Check configure/RELEASE file for consistency
 CHECK_RELEASE_YES = checkRelease
@@ -76,14 +80,9 @@ COMMON_DIR = ../O.Common
 IOCS_APPL_TOP               = $(shell $(FULLPATHNAME) $(INSTALL_LOCATION))
 
 #-------------------------------------------------------
-# Silencing the build - suppress messages during 'make -s'
+# Make echo output - suppress echoing if make's '-s' flag is set
 NOP = :
 ECHO = @$(if $(findstring s,$(MFLAGS)),$(NOP),echo)
-QUIET_FLAG := $(if $(findstring s,$(MFLAGS)),-q,)
-
-#-------------------------------------------------------
-# Convert 'make -q' flag into '-i' for genVersionHeader.pl
-QUESTION_FLAG := $(if $(findstring q,$(MFLAGS)),-i,)
 
 #-------------------------------------------------------
 ifdef T_A
@@ -93,7 +92,7 @@ INSTALL_SHRLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
 INSTALL_TCLLIB              = $(INSTALL_LOCATION_LIB)/$(T_A)
 INSTALL_BIN                 = $(INSTALL_LOCATION_BIN)/$(T_A)
 
-# Directories for libraries
+#Directories for libraries
 SHRLIB_SEARCH_DIRS          = $(INSTALL_LIB)
 
 #-------------------------------------------------------
@@ -167,13 +166,13 @@ TESTSHRLIBNAME = $(TESTSHRLIBNAME_$(SHARED_LIBRARIES))
 #--------------------------------------------------
 # obj files
 
-TARGET_OBJS =  $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS) $($*_SRCS)))
+TARGET_OBJS =  $($*_OBJLIBS) $($*_LDOBJS) $(addsuffix $(OBJ),$(basename $($*_OBJS) $($*_SRCS)))
 
 PRODUCT_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(PROD_SRCS) $(USR_OBJS) $(PROD_OBJS)))
-PROD_LD_OBJS = $(TARGET_OBJS) $(PRODUCT_OBJS)
+PROD_LD_OBJS = $(USR_OBJLIBS) $(PROD_OBJLIBS) $(TARGET_OBJS) $(PRODUCT_OBJS)
 
 LIBRARY_OBJS = $(addsuffix $(OBJ),$(basename $(SRCS) $(USR_SRCS) $(LIB_SRCS) $(LIBSRCS) $(USR_OBJS) $(LIB_OBJS)))
-LIBRARY_LD_OBJS = $(TARGET_OBJS) $(LIBRARY_OBJS)
+LIBRARY_LD_OBJS = $(USR_OBJLIBS) $(LIB_OBJLIBS) $(TARGET_OBJS) $(LIBRARY_OBJS)
 
 #--------------------------------------------------
 # Windows resource files
@@ -265,7 +264,7 @@ LIBRARY_SRCS=$(basename $(foreach lib,$(LIBRARY) $(TESTLIBRARY) $(LOADABLE_LIBRA
 LIBRARY_SRC_CFLAGS=$($(patsubst $*,SHRLIB,$(findstring $*,$(LIBRARY_SRCS)))_CFLAGS)
 
 #--------------------------------------------------
-# prefix, suffix, and ldflags for loadable shared libraries
+# prefix, suffix, and ldflags for loadable shared libraries 
 TARGET_LIB_LDFLAGS=$($(patsubst $*,LOADABLE_,$(findstring $*,$(LOADABLE_LIBRARY)))SHRLIB_LDFLAGS)
 LOADABLE_SHRLIB_PREFIX=$(SHRLIB_PREFIX)
 LOADABLE_SHRLIB_SUFFIX=$(SHRLIB_SUFFIX)
@@ -333,14 +332,6 @@ COMPILE.cpp = $(CCC) $(CPPFLAGS) $(CXXFLAGS) $(INCLUDES)
 # C preprocessor command
 PREPROCESS.cpp = $(CPP) $(CPPFLAGS) $(INCLUDES) $< > $@
 
-#--------------------------------------------------
-# genVersion header defaults
-
-# C macro name
-GENVERSIONMACRO = VCSVERSION
-# C macro default value (empty to use date+time)
-GENVERSIONDEFAULT =
-
 #--------------------------------------------------
 # Header dependency file generation
 
@@ -463,5 +454,5 @@ COMMON_INC += $(filter $(COMMON_DIR)/%, $(foreach file, $(INC), \
 SOURCE_INC = $(wildcard $(file) $(SOURCE_INC_bbb) )
 SOURCE_INC_bbb = $(foreach dir, $(ALL_SRC_DIRS), $(SOURCE_INC_aaa)  )
 SOURCE_INC_aaa = $(addsuffix /$(file), $(dir) )
-
+ 
 endif

configure/CONFIG_ENV

@@ -35,10 +35,8 @@ EPICS_CA_CONN_TMO=30.0
 EPICS_CA_REPEATER_PORT=5065
 EPICS_CA_SERVER_PORT=5064
 EPICS_CA_MAX_ARRAY_BYTES=16384
-EPICS_CA_AUTO_ARRAY_BYTES=YES
 EPICS_CA_BEACON_PERIOD=15.0
 EPICS_CA_MAX_SEARCH_PERIOD=300.0
-EPICS_CA_MCAST_TTL=1
 EPICS_CAS_BEACON_PERIOD=
 EPICS_CAS_BEACON_PORT=
 EPICS_CAS_AUTO_BEACON_ADDR_LIST=""
@@ -47,9 +45,6 @@ EPICS_CAS_SERVER_PORT=
 EPICS_CAS_INTF_ADDR_LIST=""
 EPICS_CAS_IGNORE_ADDR_LIST=""
 
-# Servers to disable
-EPICS_IOC_IGNORE_SERVERS=""
-
 # Log Server:
 # EPICS_IOC_LOG_PORT Log server port number etc.
 EPICS_IOC_LOG_PORT=7004

configure/CONFIG_SITE

@@ -161,7 +161,7 @@ USE_POSIX_THREAD_PRIORITY_SCHEDULING = YES
 
 # Site version number, if set will append '-' and this string to the
 #  EPICS version number string that is reported by many tools.
-EPICS_SITE_VERSION:=$(shell date +%Y-%m)
+EPICS_SITE_VERSION =
 
 # For GNU compiler, use pipes rather than temporary files for
 #  communication between the various stages of compilation.

configure/CONFIG_SITE_ENV

@@ -24,40 +24,41 @@
 
 #  Site-specific environment settings
 
-# Time service:
-# EPICS_TIMEZONE
-#	Local timezone info for vxWorks and RTEMS.  The format is
-#	    <name>::<minutesWest>:<startDST>:<endDST>
-#	where <name> is only used by strftime() for %Z conversions,
-#	and <startDST> and <endDST> are mmddhh - that is month,day,hour
-#	e.g. for ANL in 2018: EPICS_TIMEZONE=CUS::360:031102:110402
-#	The future dates below assume the rules don't get changed;
-#	see http://www.timeanddate.com/time/dst/2018.html to check.
-#
-#	DST for 2019  US: Mar 10 - Nov 03
-#	              EU: Mar 31 - Oct 27
-EPICS_TIMEZONE = CUS::360:031002:110302
-#EPICS_TIMEZONE = MET::-60:033102:102703
-#
-#	DST for 2020  US: Mar 08 - Nov 01
-#	              EU: Mar 29 - Oct 25
-#EPICS_TIMEZONE = CUS::360:030802:110102
-#EPICS_TIMEZONE = MET::-60:032902:102503
-#
-#	DST for 2021  US: Mar 14 - Nov 07
-#	              EU: Mar 28 - Oct 31
-#EPICS_TIMEZONE = CUS::360:031402:110702
-#EPICS_TIMEZONE = MET::-60:032802:103103
-#
-#	DST for 2022  US: Mar 13 - Nov 06
-#	              EU: Mar 27 - Oct 30
-#EPICS_TIMEZONE = CUS::360:031302:110602
-#EPICS_TIMEZONE = MET::-60:032702:103003
-#
-#	DST for 2023  US: Mar 13 - Nov 06
-#	              EU: Mar 27 - Oct 30
-#EPICS_TIMEZONE = CUS::360:031202:110502
-#EPICS_TIMEZONE = MET::-60:032602:102903
+## Time service:
+# EPICS_TZ
+#       Local timezone rules for vxWorks and RTEMS. The value follows the Posix
+#       TZ environment variable's Mm.n.d/h format (see the IBM link below for
+#       details). If TZ hasn't already been set when the osdTime timeRegister()
+#       C++ static constructor runs, this parameter will be copied into the TZ
+#       environment variable. Once the OS clock has been synchronized to NTP the
+#       routine tz2timezone() will be run to convert TZ into the TIMEZONE
+#       variable format that VxWorks needs.
+#               https://developer.ibm.com/articles/au-aix-posix/
+
+# Japan Standard Time, no DST:
+#EPICS_TZ = "JST-9"
+
+# Central European (Summer) Time:
+#EPICS_TZ = "CET-1CEST,M3.5.0/2,M10.5.0/3"
+
+# Greenwich Mean/British Summer Time:
+#EPICS_TZ = "GMT0BST,M3.5.0/1,M10.5.0/2"
+
+# US Eastern Standard/Daylight Time:
+#EPICS_TZ = "EST5EDT,M3.2.0/2,M11.1.0/2"
+
+# US Central Standard/Daylight Time:
+EPICS_TZ = "CST6CDT,M3.2.0/2,M11.1.0/2"
+
+# US Mountain Standard/Daylight Time:
+#EPICS_TZ = "MST7MDT,M3.2.0/2,M11.1.0/2"
+
+# US Pacific Standard/Daylight Time:
+#EPICS_TZ = "PST8PDT,M3.2.0/2,M11.1.0/2"
+
+# US Hawaiian Standard Time, no DST:
+#EPICS_TZ = "HST10"
+
 
 # EPICS_TS_NTP_INET
 #	NTP time server ip address for VxWorks and RTEMS.
@@ -69,11 +70,8 @@ EPICS_TS_NTP_INET=
 #	Prompt string
 # IOCSH_HISTSIZE
 #	Number of lines of command history to keep.
-# IOCSH_HISTEDIT_DISABLE
-# 	Prevents use of readline or equivalent if defined.
 IOCSH_PS1="epics> "
 IOCSH_HISTSIZE=50
-IOCSH_HISTEDIT_DISABLE=
 
 # Log Server:
 # EPICS_IOC_LOG_INET 

configure/RULES

@@ -1,10 +1,11 @@
 #*************************************************************************
-# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 ifndef T_A

configure/RULES.Db

@@ -4,17 +4,14 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
+#RULES.Db
 
-# RULES.Db
-
-# Set db substitutions and template file suffixes
+# Set db substitutions file suffix
 SUBST_SUFFIX ?= .substitutions
-TEMPL_SUFFIX ?= .template
 
-#---------------------------------------------------------------
-# vpath
+#####################################################  vpath
 
 vpath %.pm $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.pod $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
@@ -22,13 +19,12 @@ vpath %.dbd $(USR_VPATH) $(SRC_DIRS) $(dir $(DBD))
 vpath %.db $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %.vdb $(USR_VPATH) $(SRC_DIRS) $(dir $(DB))
 vpath %$(SUBST_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
-vpath %$(TEMPL_SUFFIX) $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
+vpath %.template $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath bpt%.data $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acf $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 vpath %.acs $(USR_VPATH) $(SRC_DIRS) $(COMMON_DIR)
 
-#---------------------------------------------------------------
-# dbflags dbdflags
+##################################################### dbflags dbdflags
 
 DBD_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DBD) $(RELEASE_DBD_DIRS)
 DB_SEARCH_DIRS = . .. $(COMMON_DIR) $(SRC_DIRS) $(INSTALL_DB) $(RELEASE_DB_DIRS)
@@ -37,15 +33,13 @@ DBDFLAGS = $(USR_DBDFLAGS) $(CMD_DBDFLAGS) $(addprefix -I,$(DBD_SEARCH_DIRS))
 DBFLAGS = $($*_DBFLAGS) $(USR_DBFLAGS) $(CMD_DBFLAGS) $(addprefix -I,$(DB_SEARCH_DIRS))
 REGRDDFLAGS = $(DBDFLAGS) $($*_REGRDDFLAGS) $(USR_REGRDDFLAGS) $(CMD_REGRDDFLAGS)
 
-#---------------------------------------------------------------
-# Targets
+##################################################### Targets
 
 # ---------------------------------------------------
 # To allow os specific dbd files AND have the -j option work properly,
 
-CROSS_TARGET_OS_TYPES = $(sort $(foreach target, \
-    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS), \
-    $(firstword $(subst -, ,$(target)))))
+CROSS_TARGET_OS_TYPES = $(sort $(foreach target,  \
+    $(EPICS_HOST_ARCH) $(CROSS_COMPILER_TARGET_ARCHS),$(firstword $(subst -, ,$(target)))))
 DBD += $(foreach type, $(CROSS_TARGET_OS_TYPES), $(DBD_$(type)))
 
 # Users add os specific dbd files to a Makefile as follows
@@ -92,28 +86,31 @@ SOURCE_DB_bbb = $(foreach dir, $(GENERIC_SRC_DIRS), $(SOURCE_DB_aaa)  )
 SOURCE_DB_aaa = $(addsuffix /$(file), $(dir) )
 
 COMMONS = $(COMMON_DIR)/*.dbd $(COMMON_DIR)/*.db $(COMMON_DIR)/*.h \
-          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*$(TEMPL_SUFFIX)
+          $(COMMON_DIR)/*$(SUBST_SUFFIX) $(COMMON_DIR)/*.template
 
 # Remove trailing numbers (to 99) on stem
-TEMPLATE1 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
-            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
-            $(patsubst %8,%,$(patsubst %9,%,$*))))))))))
-TEMPLATE2 = $(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%, \
-            $(patsubst %4,%,$(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%, \
-            $(patsubst %8,%,$(patsubst %9,%,$(TEMPLATE1)))))))))))
-TEMPLATE3 = $(addsuffix $(TEMPL_SUFFIX),$(addprefix ../,$(TEMPLATE2)))
-TEMPLATE_FILENAME = $(firstword $(wildcard $($*_TEMPLATE) \
-            $(addprefix ../,$($*_TEMPLATE)) ../$*$(TEMPL_SUFFIX) $(TEMPLATE3) \
-            ../template))
+TEMPLATE1=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
+          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
+          $*))))))))))
+TEMPLATE2=$(patsubst %0,%,$(patsubst %1,%,$(patsubst %2,%,$(patsubst %3,%,$(patsubst %4,%, \
+          $(patsubst %5,%,$(patsubst %6,%,$(patsubst %7,%,$(patsubst %8,%,$(patsubst %9,%, \
+          $(TEMPLATE1)))))))))))
+TEMPLATE3=$(addsuffix .template,$(addprefix ../,$(TEMPLATE2)))
+TEMPLATE_FILENAME=$(firstword $(wildcard $($*_TEMPLATE) $(addprefix ../,$($*_TEMPLATE)) ../$*.template $(TEMPLATE3) ../template))
+
+# dbst based database optimization
+ifeq '$(DB_OPT)' 'YES'
+RAW=.raw
+DBS = $(filter %.db,$(DB)) $(addsuffix $(RAW),$(filter %.db,$(DB)))
+COMMON_DBS = $(addprefix $(COMMON_DIR)/,$(DBS))
+endif
 
 INSTALL_DB_INSTALLS = $(addprefix $(INSTALL_DB)/,$(notdir $(DB_INSTALLS)))
 INSTALL_DBD_INSTALLS = $(addprefix $(INSTALL_DBD)/,$(notdir $(DBD_INSTALLS)))
 
 COMMONDEP_TARGET = $(COMMON_DIR)/$(basename $@)
 
-#---------------------------------------------------------------
-# acf files
-
+#####################################################  acf files
 # An access security configuration file, *.acf, can be created from
 # an *.acs file (has format of acf file plus #include "filename" lines)
 
@@ -126,8 +123,7 @@ ACF_INCLUDES = -I. $(TARGET_INCLUDES) $(USR_INCLUDES)\
 ACFDEPENDS_CMD = $(MKMF) -m $@ $(ACF_INCLUDES) $(COMMONDEP_TARGET) $<
 ACF_CMD = $(CPP) $(ACF_CPPFLAGS) $(ACF_INCLUDES) $< > $@
 
-#---------------------------------------------------------------
-# dependencies
+#####################################################  dependancies
 
 HINC += $(addsuffix .h,$(DBDINC_NAME))
 COMMON_DBDINC += $(addprefix $(COMMON_DIR)/,$(HINC))
@@ -137,12 +133,12 @@ DBDDEPENDS_FILES += $(addsuffix $(DEP),$(HINC) \
                     $(patsubst $(COMMON_DIR)/%,%, \
                     $(filter-out $(COMMON_DIR)/bpt%.dbd,$(COMMON_DBDS))))
 
-#---------------------------------------------------------------
+##################################################### 
 
 ifndef T_A
 
 DEP = .d
-TEMPLATE3 += $(addsuffix $(TEMPL_SUFFIX), $(TEMPLATE2))
+TEMPLATE3+=$(addsuffix .template, $(TEMPLATE2))
 
 COMMON_DIR = .
 INSTALL_DBDS =
@@ -157,13 +153,18 @@ ACTIONS += install
 ACTIONS += buildInstall
 ACTIONS += runtests tapfiles clean-tests test-results junitfiles
 
-actionArchTargets = $(foreach action, $(ACTIONS), \
-    $(foreach arch, $(BUILD_ARCHS), $(action)$(DIVIDER)$(arch)))
-cleanArchTargets = $(foreach arch, $(BUILD_ARCHS), clean$(DIVIDER)$(arch))
+actionArchTargets = $(foreach x, $(ACTIONS),\ $(foreach arch,$(BUILD_ARCHS), $(x)$(DIVIDER)$(arch)))
 
+cleanArchTargets = $(foreach arch,$(BUILD_ARCHS), clean$(DIVIDER)$(arch))
 -include $(TOP)/configure/CONFIG_APP_INCLUDE
 
 all: install
+ifeq ($(EPICS_HOST_ARCH),$T_A)
+host: install
+else
+# Do nothing
+host:
+endif
 
 install: buildInstall
 
@@ -171,30 +172,20 @@ buildInstall : build
 
 rebuild: clean install
 
-.PHONY: all $(ACTIONS)
+.PHONY: all host $(ACTIONS)
 
 $(actionArchTargets) $(BUILD_ARCHS): install
 $(cleanArchTargets): clean
 
 .PHONY: $(BUILD_ARCHS) $(actionArchTargets) $(cleanArchTargets)
 
-else
-  # T_A is defined
-  ifeq ($(EPICS_HOST_ARCH),$(T_A))
-    host: install
-  else
-    host:
-  endif
-
-  .PHONY: host
-endif # T_A
+endif # T_A defined
 
 ifneq (,$(strip $(DBDDEPENDS_FILES)))
 -include $(DBDDEPENDS_FILES)
 endif
 
-#---------------------------------------------------------------
-# build dependancies, clean rule
+#####################################################  build dependancies, clean rule
 
 inc : $(COMMON_INC) $(INSTALL_INC)
 
@@ -214,8 +205,7 @@ db_clean :
 
 realclean: clean
 
-#---------------------------------------------------------------
-# Dependency files
+##################################################### Dependency files
 
 %Record.h$(DEP): $(COMMON_DIR)/%Record.dbd
 	@$(RM) $@
@@ -266,19 +256,19 @@ menu%.h$(DEP): ../menu%.dbd
 	@$(DBEXPAND) -D $(DBDFLAGS) -o $(COMMONDEP_TARGET) $($*_DBD) > $@
 	@echo "$(COMMONDEP_TARGET): ../Makefile" >> $@
 
-%.db$(DEP): %$(SUBST_SUFFIX)
+%.db$(RAW)$(DEP): %$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(DEP): ../%$(SUBST_SUFFIX)
+%.db$(RAW)$(DEP): ../%$(SUBST_SUFFIX)
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) -S$< $(TEMPLATE_FILENAME) > $@
 
-%.db$(DEP): %$(TEMPL_SUFFIX)
+%.db$(RAW)$(DEP): %.template
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
-%.db$(DEP): ../%$(TEMPL_SUFFIX)
+%.db$(RAW)$(DEP): ../%.template
 	@$(RM) $@
 	$(MSI3_15) -D $(DBFLAGS) -o $(COMMONDEP_TARGET) $< > $@
 
@@ -292,8 +282,14 @@ menu%.h$(DEP): ../menu%.dbd
 
 .PRECIOUS: %$(DEP)
 
-#---------------------------------------------------------------
-# Substitution files
+##################################################### CapFast filter
+
+$(COMMON_DIR)/%.edf: ../%.sch $(DEPSCHS) 
+	@$(RM) $@
+	@if [ ! -f cad.rc -a -r ../cad.rc ] ; then ln -s ../cad.rc ; fi
+	$(SCH2EDIF) $(SCH2EDIF_SYSFLAGS) $(SCH2EDIF_FLAGS) -o $@  $<
+
+##################################################### Substitution files
 
 #  WARNING: CREATESUBSTITUTIONS script needs output dir on command line
 
@@ -314,21 +310,25 @@ $(INSTALL_DB)/%$(SUBST_SUFFIX): ../%$(SUBST_SUFFIX)
 
 .PRECIOUS: $(COMMON_DIR)/%$(SUBST_SUFFIX)
 
-#---------------------------------------------------------------
-# Template files
+##################################################### Template files
 
-$(INSTALL_DB)/%$(TEMPL_SUFFIX): %$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.template: $(COMMON_DIR)/%.edf 
+	@$(RM) $@
+	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $@.VAR $<
+	@$(REPLACEVAR) < $@.VAR > $@
+	@$(RM) $@.VAR
+
+$(INSTALL_DB)/%.template: %.template
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-$(INSTALL_DB)/%$(TEMPL_SUFFIX): ../%$(TEMPL_SUFFIX)
+$(INSTALL_DB)/%.template: ../%.template
 	$(ECHO) "Installing template file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-.PRECIOUS: $(COMMON_DIR)/%$(TEMPL_SUFFIX)
+.PRECIOUS: $(COMMON_DIR)/%.template
 
-#---------------------------------------------------------------
-# INC files
+##################################################### INC files
 
 $(COMMON_DIR)/%Record.h: $(COMMON_DIR)/%Record.dbd
 	@$(RM) $(notdir $@)
@@ -362,8 +362,7 @@ $(COMMON_DIR)/menu%.h: ../menu%.dbd
 
 .PRECIOUS: $(COMMON_DIR)/%.h
 
-#---------------------------------------------------------------
-# DBD files
+##################################################### DBD files
 
 $(COMMON_DIR)/bpt%.dbd: bpt%.data
 	@$(RM) $(notdir $@)
@@ -426,64 +425,56 @@ $(foreach file, $(DBD_INSTALLS), $(eval $(call DBD_INSTALLS_template, $(file))))
 
 .PRECIOUS: $(COMMON_DBDS) $(COMMON_DIR)/%.dbd
 
-#---------------------------------------------------------------
-# HTML files
+##################################################### HTML files
 
-$(COMMON_DIR)/%.html: %.dbd.pod
+$(COMMON_DIR)/%.html: %.dbd.pod $(TOOLS)/dbdToHtml.pl
 	@$(RM) $(notdir $@)
-	$(DBDTOHTML) $(DBDFLAGS) -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/dbdToHtml.pl $(DBDFLAGS) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: %.pod
+$(COMMON_DIR)/%.html: %.pod $(TOOLS)/podToHtml.pl
 	@$(RM) $(notdir $@)
-	$(PODTOHTML) -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: %.pm
+$(COMMON_DIR)/%.html: %.pm $(TOOLS)/podToHtml.pl
 	@$(RM) $(notdir $@)
-	$(PODTOHTML) -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.html: ../%.pm
+$(COMMON_DIR)/%.html: ../%.pm $(TOOLS)/podToHtml.pl
 	@$(RM) $(notdir $@)
-	$(PODTOHTML) -s -o $(notdir $@) $<
-	@$(MKDIR) $(dir $@)
-	@$(MV) $(notdir $@) $@
-
-$(COMMON_DIR)/%.html: ../%.pl
-	@$(RM) $(notdir $@)
-	$(PODTOHTML) -s -o $(notdir $@) $<
+	$(PERL) $(TOOLS)/podToHtml.pl -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
 .PRECIOUS: $(COMMON_DIR)/%.html %.html
 
-#---------------------------------------------------------------
-# DB files
+##################################################### DB files
 
-$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.edf 
+$(COMMON_DIR)/%.db$(RAW): $(COMMON_DIR)/%.edf 
 	$(E2DB) $(E2DB_SYSFLAGS) $(E2DB_FLAGS) -n $*.VAR $<
 	@$(REPLACEVAR) < $*.VAR > $@
 	@$(RM) $*.VAR
 
-$(COMMON_DIR)/%.db: %$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): %$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: ../%$(SUBST_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): ../%$(SUBST_SUFFIX)
 	$(ECHO) "Inflating database from $< $(TEMPLATE_FILENAME)"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) -S$< $(TEMPLATE_FILENAME)
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: %$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): %.template
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
 	@$(MV) $(notdir $@) $@
 
-$(COMMON_DIR)/%.db: ../%$(TEMPL_SUFFIX)
+$(COMMON_DIR)/%.db$(RAW): ../%.template
 	$(ECHO) "Inflating database from $<"
 	@$(RM) $(notdir $@)
 	$(MSI3_15) $(DBFLAGS) -o $(notdir $@) $<
@@ -501,6 +492,22 @@ $(COMMON_DIR)/%.acf: ../%.acs
 
 .PRECIOUS: $(COMMON_DIR)/%.acf
 
+# dbst based database optimization
+ifeq '$(DB_OPT)' 'YES'
+
+$(COMMON_DIR)/%.db$(RAW): ../%.db
+	@$(RM) $@
+	$(CP) $< $@
+
+$(COMMON_DIR)/%.db: $(COMMON_DIR)/%.db$(RAW)
+	$(ECHO) "Optimizing database $@"
+	@$(RM) $@
+	$(DBST) . $< -d > $@
+
+.PRECIOUS: $(COMMON_DIR)/%.db
+.PRECIOUS: $(DB:%=$(COMMON_DIR)/%$(RAW))
+else
+
 $(INSTALL_DB)/%: %
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -508,6 +515,7 @@ $(INSTALL_DB)/%: %
 $(INSTALL_DB)/%: ../%
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
+endif
 
 $(INSTALL_DB)/%.db: $(COMMON_DIR)/%.db
 	$(ECHO) "Installing created db file $@"
@@ -523,8 +531,8 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 .PRECIOUS: $(COMMON_DIR)/%.edf
 .PRECIOUS: $(COMMON_DBS)
 
-#---------------------------------------------------------------
-# register record,device,driver support
+##################################################### register record,device,driver support
+
 
 %_registerRecordDeviceDriver.cpp: $(COMMON_DIR)/%.dbd
 	@$(RM) $@
@@ -540,3 +548,4 @@ $(foreach file, $(DB_INSTALLS), $(eval $(call DB_INSTALLS_template, $(file))))
 
 .PRECIOUS: %_registerRecordDeviceDriver.cpp
 
+##################################################### END OF FILE

configure/RULES.ioc

@@ -4,10 +4,9 @@
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
 # EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
-
-# RULES.ioc
+#RULES.ioc
 
 include $(CONFIG)/RULES_DIRS
 

configure/RULES_ARCHS

@@ -90,4 +90,6 @@ realclean:
 .PHONY : $(BUILD_ARCHS) rebuild archsCommonClean
 .PHONY : $(ACTIONS) clean realclean archclean host all
 
-include $(CONFIG)/RULES_COMMON
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_BUILD

@@ -6,12 +6,11 @@
 # EPICS BASE is distributed subject to a Software License Agreement found
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
-
-# RULES_BUILD
-
-# Rules for making things specified in a Makefile
 #
-# CWD is O.$(T_A), but most sources are elsewhere
+#	Rules for making things specified in Makefile
+#
+#	we are in O.$(T_A), but most sources are elsewhere
+#
 
 ifndef BASE_RULES_BUILD
 BASE_RULES_BUILD=1
@@ -43,7 +42,6 @@ LOADABLE_LIBRARY += $(LOADABLE_LIBRARY_HOST)
 OBJS += $(OBJS_HOST)
 PROD += $(PROD_HOST)
 SCRIPTS += $(SCRIPTS_HOST)
-TARGETS += $(TARGETS_HOST)
 TESTLIBRARY += $(TESTLIBRARY_HOST)
 TESTSCRIPTS += $(TESTSCRIPTS_HOST)
 TESTPROD += $(TESTPROD_HOST)
@@ -55,7 +53,6 @@ LOADABLE_LIBRARY += $(LOADABLE_LIBRARY_IOC)
 OBJS += $(OBJS_IOC)
 PROD += $(PROD_IOC)
 SCRIPTS += $(SCRIPTS_IOC)
-TARGETS += $(TARGETS_IOC)
 TESTLIBRARY += $(TESTLIBRARY_IOC)
 TESTSCRIPTS += $(TESTSCRIPTS_IOC)
 TESTPROD += $(TESTPROD_IOC)
@@ -82,26 +79,9 @@ else
 host:
 endif
 
-include $(CONFIG)/RULES_FILE_TYPE
+-include $(CONFIG)/RULES_FILE_TYPE
 
-include $(CONFIG)/RULES.Db
-
-#---------------------------------------------------------------
-# Do not build anything if current path matches SKIP_BUILD
-
-ifneq (,$(strip $(SKIP_BUILDS)))
-CURRENT_MODULE=$(subst $(realpath $(TOP)/..)/,,$(subst $(realpath $(dir $(lastword $(MAKEFILE_LIST)))..)/,,$(realpath ..)))
-ifneq ($(filter $(SKIP_BUILDS) $(addsuffix /%,$(SKIP_BUILDS)),$(CURRENT_MODULE)),)
-$(info Skipping $(CURRENT_MODULE) for $(T_A))
-PROD=
-TESTPROD=
-LIBRARY=
-TESTLIBRARY=
-LOADABLE_LIBRARY=
-TESTS=
-SRC_FILES=
-endif
-endif
+-include $(CONFIG)/RULES.Db
 
 #---------------------------------------------------------------
 # Include defines and rules for prod, library and test* targets
@@ -205,7 +185,7 @@ endif
 
 # RELEASE file consistency checking
 checkRelease:
-	+$(CONVERTRELEASE) checkRelease
+	$(CONVERTRELEASE) checkRelease
 warnRelease:
 	-$(CONVERTRELEASE) checkRelease
 noCheckRelease:
@@ -352,12 +332,6 @@ $(MODNAME): %$(MODEXT): %$(EXE)
 	@$(RM) $@
 	$(LINK.mod)
 
-#---------------------------------------------------------------
-# Generate Perl include path module
-%ModuleDirs.pm: $(wildcard $(TOP)/configure/RELEASE*)
-	@$(MKDIR) $(dir $@)
-	$(CONVERTRELEASE) -T $(TOP) $@
-
 #---------------------------------------------------------------
 # Automated testing
 
@@ -377,7 +351,7 @@ testspec: $(TESTSCRIPTS)
 test-results: tapfiles
 ifneq ($(TAPFILES),)
 ifdef RUNTESTS_ENABLED
-	prove --failures --ext .tap --exec "$(CAT)" --color $(TAPFILES)
+	$(PROVE) --failures --ext .tap --exec "$(CAT)" --color $(TAPFILES)
 endif
 
 CURRENT_TAPFILES := $(wildcard $(TAPFILES))
@@ -407,21 +381,13 @@ endif
 # If there's a perl test script (.plt) available, use it
 %.t: ../%.plt
 	@$(RM) $@
-	$(EXPAND_TOOL) -t $(INSTALL_LOCATION) -a $(T_A) $< $@
+	$(CP) $< $@
 
 # Test programs (.t files) must be written in Perl.
 # Generate a perl program to exec the real test binary.
 %.t: %$(EXE) $(TOOLS)/makeTestfile.pl
 	@$(RM) $@
-	$(PERL) $(TOOLS)/makeTestfile.pl $(T_A) $(EPICS_HOST_ARCH) $@ $<
-
-#---------------------------------------------------------------
-# Generate header with version number from VCS
-
-ifneq ($(GENVERSION),)
-$(COMMON_DIR)/$(GENVERSION): FORCE
-	$(GENVERSIONHEADER) -t $(TOP) -N $(GENVERSIONMACRO) -V "$(GENVERSIONDEFAULT)" $@
-endif
+	$(PERL) $(TOOLS)/makeTestfile.pl $@ $<
 
 #---------------------------------------------------------------
 # Install rules for BIN_INSTALLS and LIB_INSTALLS
@@ -498,7 +464,6 @@ ifneq (,$(strip $(LOADABLE_SHRLIB_VERSION)))
 endif # LOADABLE_SHRLIB_VERSION
 endif # LOADABLE_SHRLIB_SUFFIX
 
-ifneq ($(INSTALL_CONFIGS),)
 $(INSTALL_CONFIG)/%: %
 	$(ECHO) "Installing config file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
@@ -506,7 +471,6 @@ $(INSTALL_CONFIG)/%: %
 $(INSTALL_CONFIG)/%: ../%
 	$(ECHO) "Installing config file $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
-endif
 
 $(INSTALL_INCLUDE)/% : $(COMMON_DIR)/%
 	$(ECHO) "Installing generated generic include file $@"
@@ -552,18 +516,14 @@ $(INSTALL_TEMPLATES_SUBDIR)/%: %
 	$(ECHO) "Installing $@"
 	@$(INSTALL) -d -m $(INSTALL_PERMISSIONS) $< $(@D)
 
-include $(CONFIG)/RULES_EXPAND
+-include $(CONFIG)/RULES_EXPAND
 
 .PRECIOUS: %.i %.o %.c %.nm %.cpp %.cc
 .PRECIOUS: $(COMMON_INC)
 
 .PHONY: all host inc build install clean rebuild buildInstall build_clean
 .PHONY: runtests tapfiles clean-tests test-results junitfiles
-.PHONY: checkRelease warnRelease noCheckRelease FORCE
+.PHONY: checkRelease warnRelease noCheckRelease
 
-include $(CONFIG)/RULES_COMMON
-
-else
-    $(warning Warning: Base configure/RULES_BUILD file included more than once. \
-        Does configure/RELEASE have multiple pointers to $(EPICS_BASE)?)
 endif # BASE_RULES_BUILD
+#	EOF RULES_BUILD

configure/RULES_COMMON

@@ -1,48 +0,0 @@
-#*************************************************************************
-# Copyright (c) 2018 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# These rules show the set of Makefiles, config files and
-# rules files loaded by GNUmake.
-
-show-makefiles::
-	@echo
-	@echo Makefiles read:
-define SHOW_MAKEFILE_template
-show-makefiles::
-	@echo "    $(1)"
-endef
-$(foreach file,$(MAKEFILE_LIST), \
-    $(eval $(call SHOW_MAKEFILE_template,$(file))))
-
-.PHONY: show-makefiles
-
-
-# These rules support printing a Makefile variable values.
-# Many variables are only set inside an O.<arch> build directory.
-#   make PRINT.T_A
-
-PRINT_Var = $(@:PRINT.%=%)
-PRINT.%:
-	@echo $(PRINT_Var) = '$($(PRINT_Var))'
-
-.PHONY: PRINT PRINT.%
-
-
-# Clean rules for recursively deleting editor backup files
-# and dependency (.d) files from CWD and below.
-
-cvsclean:
-	$(PERL) $(CVSCLEAN)
-depclean:
-	$(PERL) $(DEPCLEAN)
-
-.PHONY: cvsclean depclean
-
-
-#  User specific rules
-#
--include $(HOME)/configure/RULES_USER

configure/RULES_DIRS

@@ -86,11 +86,13 @@ $(DIRS) $(dirActionTargets) $(dirArchTargets) $(dirActionArchTargets) :
 $(ARCHS) $(ACTIONS) $(actionArchTargets) :%: \
     $(foreach dir, $(DIRS), $(dir)$(DIVIDER)%)
 
+.PHONY : $(DIRS) all host rebuild
+.PHONY : $(ARCHS) $(ACTIONS)
+.PHONY : $(dirActionTargets) $(dirArchTargets)
+.PHONY : $(dirActionArchTargets)
+.PHONY : $(actionArchTargets)
 
-.PHONY: $(DIRS) all host rebuild
-.PHONY: $(ARCHS) $(ACTIONS)
-.PHONY: $(dirActionTargets) $(dirArchTargets)
-.PHONY: $(dirActionArchTargets)
-.PHONY: $(actionArchTargets)
 
-include $(CONFIG)/RULES_COMMON
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_EXPAND

@@ -1,13 +1,4 @@
-#*************************************************************************
-# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
-#     National Laboratory.
-# Copyright (c) 2002 The Regents of the University of California, as
-#     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# RULES_EXPAND
+# <top>/configure/RULES_EXPAND
 
 vpath %@ $(USR_VPATH) $(ALL_SRC_DIRS)
 

configure/RULES_FILE_TYPE

@@ -7,11 +7,9 @@
 # in the file LICENSE that is included with this distribution.
 #*************************************************************************
 
-# Include <top>/configure/RULES_BUILD from tops defined in RELEASE* files,
-# excluding EPICS_BASE
+# Include <top>/configure/RULES_BUILD from tops defined in RELEASE* files
 #
-RELEASE_RULES_BUILDS = $(foreach top, \
-    $(filter-out EPICS_BASE, $(RELEASE_TOPS)), \
+RELEASE_RULES_BUILDS = $(foreach top, $(RELEASE_TOPS), \
     $(wildcard $($(top))/configure/RULES_BUILD))
 ifneq ($(RELEASE_RULES_BUILDS),)
   include $(RELEASE_RULES_BUILDS)
@@ -25,7 +23,7 @@ ifneq ($(RELEASE_CFG_RULES),)
   include $(RELEASE_CFG_RULES)
 endif
 
-# If this is not BASE then include <top>/configure/RULES_BUILD
+# If this is not BASE then include <TOP>/configure/RULES_BUILD
 #
 ifeq ($(wildcard $(TOP)/configure/CONFIG_BASE_VERSION),)
 TOP_RULES_BUILDS = $(wildcard $(TOP)/configure/RULES_BUILD)
@@ -69,3 +67,7 @@ file_type_clean:
 	@$(RM) $(foreach type, $(FILE_TYPE), $($(type)))
 
 .PHONY : file_type_clean
+
+#  User specific rules
+#
+-include $(HOME)/configure/RULES_USER

configure/RULES_MODULES

@@ -1,47 +0,0 @@
-#*************************************************************************
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in file LICENSE that is included with this distribution.
-#*************************************************************************
-
-# Support modules can use these rules to build submodules too.
-#
-# The requirements to do so are:
-#    1. Create a file CONFIG_SITE.local in the same directory as the
-#       Makefile, which defines these variables (the last one is empty):
-#           PARENT_MODULE - The name submodules call their parent
-#           INSTALL_LOCATION := $($(PARENT_MODULE))
-#           CONFIG_INSTALLS =
-#    2. The Makefile must set TOP and include $(TOP)/configure/CONFIG and
-#       CONFIG_SITE.local
-#    3. Submodules are added to the SUBMODULES variable in the Makefile
-#    4. Dependencies between submodules must be set using
-#           <name>_DEPEND_DIRS = <prerequisites>
-#    5. The Makefile must end by including $(TOP)/configure/RULES_MODULES
-#    6. Submodules must have a configure/RELEASE file that contains
-#           -include $(TOP)/../RELEASE.$(EPICS_HOST_ARCH).local
-#    7. Submodules must have a configure/CONFIG_SITE file that contains
-#           -include $(TOP)/../CONFIG_SITE.local
-
-# Add checked-out submodules to DIRS
-DIRS += $(subst /Makefile,,$(wildcard $(addsuffix /Makefile, $(SUBMODULES))))
-
-include $(CONFIG)/RULES_DIRS
-
-INSTALL_LOCATION_ABS := $(abspath $(INSTALL_LOCATION))
-RELEASE_LOCAL := RELEASE.$(EPICS_HOST_ARCH).local
-
-# Ensure that RELEASE.<host>.local exists before doing anything else
-all host $(DIRS) $(ARCHS) $(ACTIONS) $(dirActionTargets) $(dirArchTargets) \
-    $(dirActionArchTargets) $(actionArchTargets): | $(RELEASE_LOCAL)
-
-# Convenience target
-RELEASE.host: $(RELEASE_LOCAL)
-
-$(RELEASE_LOCAL): Makefile CONFIG_SITE.local
-	$(ECHO) Creating $@ with
-	$(ECHO) "    $(PARENT_MODULE) = $(INSTALL_LOCATION_ABS)"
-	@echo $(PARENT_MODULE) = $(INSTALL_LOCATION_ABS)> $@
-realclean:
-	$(RM) $(wildcard RELEASE.*.local)
-
-.PHONY: RELEASE.host realclean

configure/RULES_OCTAVE

@@ -1,10 +1,11 @@
 #*************************************************************************
-# Copyright (c) 2006 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution. 
 #*************************************************************************
 
 # Octave definitions and rules

configure/RULES_TARGET

@@ -1,13 +1,18 @@
 #*************************************************************************
-# Copyright (c) 2011 UChicago Argonne LLC, as Operator of Argonne
+# Copyright (c) 2002 The University of Chicago, as Operator of Argonne
 #     National Laboratory.
 # Copyright (c) 2002 The Regents of the University of California, as
 #     Operator of Los Alamos National Laboratory.
-# EPICS BASE is distributed subject to a Software License Agreement found
-# in the file LICENSE that is included with this distribution.
+# EPICS BASE Versions 3.13.7
+# and higher are distributed subject to a Software License Agreement found
+# in file LICENSE that is included with this distribution.
 #*************************************************************************
-
-# RULES_TARGET
+#
+#  RULES_TARGET
+#
+#  This file is to be maintained by the community.
+#
+#-----------------------------------------------------------------------
 
 define TARGET_template
 $(1)_$(2) += $$(if $$(strip $$($(1)_$(2)_$$(OS_CLASS))), \
@@ -15,7 +20,7 @@ $(1)_$(2) += $$(if $$(strip $$($(1)_$(2)_$$(OS_CLASS))), \
              $$($(1)_$(2)_DEFAULT))
 endef
 
-$(foreach type, SRCS RCS OBJS LDFLAGS LDOBJS SYS_LIBS , \
+$(foreach type, SRCS RCS OBJS LDFLAGS OBJLIBS LDOBJS SYS_LIBS , \
 $(foreach target, $(PROD) $(TESTPROD) $(LIBRARY) $(TESTLIBRARY) $(LOADABLE_LIBRARY) , \
     $(eval $(call TARGET_template,$(strip $(target)),$(type)))))
 
@@ -147,3 +152,4 @@ $(foreach target, $(LOADABLE_LIBRARY), \
     $(eval $(call LOADABLE_LIBRARY_template,$(strip $(target)))))
 
 #-----------------------------------------------------------------------
+

configure/RULES_TOP

@@ -9,31 +9,18 @@
 
 include $(CONFIG)/RULES_DIRS
 
-# Disable most top rules when installing into a parent's tree, indicated
-# by PARENT_MODULE being set in the modules/CONFIG_SITE.local file and
-# INSTALL_LOCATION pointing to the the same place as in the parent.
-ifeq ($(origin PARENT_MODULE),file)
-  ifeq ($(INSTALL_LOCATION),$($(PARENT_MODULE)))
-    DISABLE_TOP_RULES=YES
-  endif
-endif
-
-ifndef DISABLE_TOP_RULES
-  #
-  # Rules for a regular application top directory
-  #
-
 distclean: realclean cvsclean realuninstall
 
+CVSCLEAN = $(call FIND_TOOL,cvsclean.pl)
+cvsclean:
+	$(PERL) $(CVSCLEAN)
+
 realuninstall: uninstallDirs
 	$(RMDIR) $(INSTALL_LOCATION_BIN)
 	$(RMDIR) $(INSTALL_LOCATION_LIB)
 
-UNINSTALL_DIRS += $(INSTALL_DB) $(INSTALL_DBD) $(INSTALL_DOC) $(INSTALL_HTML)
-UNINSTALL_DIRS += $(INSTALL_INCLUDE) $(INSTALL_TEMPLATES) $(DIRECTORY_TARGETS)
-ifneq ($(INSTALL_LOCATION),$(TOP))
-  UNINSTALL_DIRS += $(INSTALL_CONFIG)
-endif
+UNINSTALL_DIRS += $(INSTALL_DBD) $(INSTALL_INCLUDE) $(INSTALL_DOC) \
+    $(INSTALL_HTML) $(INSTALL_TEMPLATES) $(INSTALL_DB) $(DIRECTORY_TARGETS)
 uninstallDirs:
 	$(RMDIR) $(UNINSTALL_DIRS)
 
@@ -46,8 +33,6 @@ uninstall$(DIVIDER)%:
 	$(RMDIR) $(INSTALL_LOCATION_BIN)/$(archPart)
 	$(RMDIR) $(INSTALL_LOCATION_LIB)/$(archPart)
 
-# Remove the bin and lib directories if they have no sub-directories
-#
 cleandirs:
 	@$(NOP)
 ifeq ($(wildcard $(INSTALL_LOCATION_BIN)/*),)
@@ -57,16 +42,6 @@ ifeq ($(wildcard $(INSTALL_LOCATION_LIB)/*),)
 	$(RMDIR) $(INSTALL_LOCATION_LIB)
 endif
 
-else
-  #
-  # Using a disabled rule aborts
-  #
-
-  cleandirs distclean uninstall realuninstall archuninstall:
-	$(error Target '$@' not available in a submodule)
-
-endif # DISABLE_TOP_RULES
-
 
 help:
 	@echo "Usage: gnumake [options] [target] ..."
@@ -82,39 +57,31 @@ help:
 	@echo "                      Cannot be used within an O.<arch> dir"
 	@echo "     rebuild        - Same as clean install"
 	@echo "     archclean      - Removes O.<arch> dirs but not O.Common dir"
-	@echo "     depclean       - Removes .d files from all O.<arch> dirs."
-	@echo "     cvsclean       - Removes backup files etc. from all dirs below"
-	@echo "     runtests       - Run self-tests, summarize results immediately"
-	@echo "     tapfiles       - Run self-tests, save to O.<arch>/*.tap files"
-	@echo "     test-results   - Summarize all O.<arch>/*.tap files"
-	@echo "     clean-tests    - Removes all O.<arch>/*.tap files"
+	@echo "     runtests       - Run self-tests, summarize results"
 	@echo "\"Partial\" build targets supported by Makefiles:"
 	@echo "     host           - Builds and installs $(EPICS_HOST_ARCH) only."
 	@echo "     inc$(DIVIDER)<arch>     - Installs <arch> only header files."
 	@echo "     build$(DIVIDER)<arch>   - Builds and installs <arch> only."
 	@echo "     install$(DIVIDER)<arch> - Builds and installs <arch> only."
 	@echo "     clean$(DIVIDER)<arch>   - Cleans <arch> binaries in O.<arch> dirs only."
-	@echo "Targets supported by top level Makefile:"
-ifndef DISABLE_TOP_RULES
-	@echo "     archuninstall  - Remove bin & lib directories created by this hostarch."
 	@echo "     uninstall$(DIVIDER)<arch> - Remove bin & lib directories for <arch> only."
+	@echo "Targets supported by top level Makefile:"
+	@echo "     archuninstall  - Remove bin & lib directories created by this hostarch."
 	@echo "     uninstall      - Remove install directories created by this hostarch."
 	@echo "     realuninstall  - Removes ALL install dirs"
 	@echo "     distclean      - Same as realclean cvsclean realuninstall."
-endif
+	@echo "     cvsclean       - Removes cvs .#* files in all dirs of directory tree"
 	@echo "     help           - Prints this list of valid make targets "
-	@echo "Object targets are supported by the O.<arch> level Makefile .e.g"
+	@echo "Indiv. object targets are supported by O.<arch> level Makefile .e.g"
 	@echo "     xxxRecord.o"
 
-.PHONY: cleandirs distclean uninstall help
-.PHONY: realuninstall archuninstall uninstallDirs
+.PHONY: cleandirs distclean cvsclean realuninstall archuninstall uninstallDirs
+.PHONY: uninstall help
 
-ifndef DISABLE_TOP_RULES
-  # Include <top>/cfg/TOP_RULES* files from tops defined in RELEASE* files
-  #
-  RELEASE_CFG_TOP_RULES = $(foreach top, $(RELEASE_TOPS), \
-      $(wildcard $($(top))/cfg/TOP_RULES*))
-  ifneq ($(RELEASE_CFG_TOP_RULES),)
-    include $(RELEASE_CFG_TOP_RULES)
-  endif
+# Include <top>/cfg/TOP_RULES* files from tops defined in RELEASE* files
+#
+RELEASE_CFG_TOP_RULES = $(foreach top, $(RELEASE_TOPS), \
+    $(wildcard $($(top))/cfg/TOP_RULES*))
+ifneq ($(RELEASE_CFG_TOP_RULES),)
+  include $(RELEASE_CFG_TOP_RULES)
 endif

configure/os/CONFIG.Common.RHEL7-x86_64

@@ -1,4 +0,0 @@
-# Include definitions common to linux pentium targets
-include $(CONFIG)/os/CONFIG.Common.linux-x86_64
-
-ARCH_DEP_CXXFLAGS += -fno-strict-aliasing

configure/os/CONFIG.Common.RHEL7-x86_64-clang

@@ -1 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.linux-clang

configure/os/CONFIG.Common.RTEMS

@@ -27,13 +27,9 @@ ifneq ($(CONFIG),$(TOP)/configure)
 -include $(TOP)/configure/CONFIG_SITE.Common.RTEMS
 endif
 
-#--------------------------------------------------
-# Set RTEMS_BSP from T_A if not already done
-RTEMS_BSP ?= $(subst RTEMS-,,$(T_A))
-
 #-------------------------------------------------------
 # Pick up the RTEMS tool/path definitions from the RTEMS BSP directory.
-include $(RTEMS_BASE)/$(RTEMS_TARGET_CPU)-rtems$(RTEMS_VERSION)/$(RTEMS_BSP)/Makefile.inc
+include $(RTEMS_BASE)/$(RTEMS_TARGET_CPU)-rtems$(RTEMS_VERSION)/$(subst RTEMS-,,$(T_A))/Makefile.inc
 include $(RTEMS_CUSTOM)
 include $(CONFIG.CC)
 

configure/os/CONFIG.Common.RTEMS-at91rm9200ek

@@ -9,6 +9,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = at91rm9200ek
-RTEMS_TARGET_CPU = arm
+RTEMS_TARGET_CPU=arm
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-beatnik

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = beatnik
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-gen68360

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = gen68360
-RTEMS_TARGET_CPU = m68k
+RTEMS_TARGET_CPU=m68k
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mcp750

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = mcp750
-RTEMS_TARGET_CPU = ppc
+RTEMS_TARGET_CPU=ppc
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mvme167

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = mvme167
-RTEMS_TARGET_CPU = m68k
+RTEMS_TARGET_CPU=m68k
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-mvme2100

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = mvme2100
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-mvme2700

@@ -1,7 +1,6 @@
 #
 # Author: Matt Rippa
 #
-RTEMS_BSP = mvme2700
 RTEMS_TARGET_CPU = powerpc
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 ARCH_DEP_CFLAGS += -DHAVE_PPCBUG

configure/os/CONFIG.Common.RTEMS-mvme3100

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = mvme3100
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-mvme5500

@@ -5,7 +5,6 @@
 # All RTEMS targets use the same Makefile fragment
 #
 EXE = .elf
-RTEMS_BSP = mvme5500
 RTEMS_TARGET_CPU = powerpc
 GNU_TARGET = powerpc-rtems
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL

configure/os/CONFIG.Common.RTEMS-pc386

@@ -5,15 +5,14 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = pc386
-RTEMS_TARGET_CPU = i386
+RTEMS_TARGET_CPU=i386
 
 MUNCH_SUFFIX = .boot
 define MUNCH_CMD
-	$(RM) $*.bin
-	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< $*.bin
+	$(RTEMS_TOOLS)/bin/$(OBJCOPY_FOR_TARGET) -O binary -R .comment -S $< temp.bin
 	$(BIN2BOOT) $@ 0x00097E00 \
-	    $(PROJECT_RELEASE)/lib/start16.bin 0x00097C00 0 $*.bin 0x00100000 0
+		$(PROJECT_RELEASE)/lib/start16.bin 0x00097C00 0 temp.bin 0x00100000 0
+	rm -f temp.bin
 endef
 
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-pc386-qemu

@@ -1,11 +0,0 @@
-# CONFIG.Common.RTEMS-pc386-qemu
-#
-# Definitions for the RTEMS-pc386-qemu target
-# Site-specific overrides go in CONFIG_SITE.Common.RTEMS-pc386-qemu
-#
-#-------------------------------------------------------
-
-# Include definitions from RTEMS-pc386
-include $(CONFIG)/os/CONFIG.Common.RTEMS-pc386
-
-RTEMS_QEMU_FIXUPS = YES

configure/os/CONFIG.Common.RTEMS-psim

@@ -5,6 +5,5 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = psim
-RTEMS_TARGET_CPU = ppc
+RTEMS_TARGET_CPU=ppc
 include $(CONFIG)/os/CONFIG.Common.RTEMS

configure/os/CONFIG.Common.RTEMS-uC5282

@@ -5,7 +5,6 @@
 #
 # All RTEMS targets use the same Makefile fragment
 #
-RTEMS_BSP = uC5282
 RTEMS_TARGET_CPU = m68k
 ARCH_DEP_CFLAGS += -DMY_DO_BOOTP=NULL
 

configure/os/CONFIG.Common.SL5-x86

@@ -1,6 +0,0 @@
-# Include definitions common to linux pentium targets
-include $(CONFIG)/os/CONFIG.Common.linux-x86
-
-COMMANDLINE_LIBRARY = READLINE_NCURSES
-
-ARCH_DEP_CFLAGS += -march=i686

configure/os/CONFIG.Common.SL5-x86_64

@@ -1,4 +0,0 @@
-# Include definitions common to linux pentium targets
-include $(CONFIG)/os/CONFIG.Common.linux-x86_64
-
-COMMANDLINE_LIBRARY = READLINE_NCURSES

configure/os/CONFIG.Common.SL6-x86

@@ -1,7 +0,0 @@
-# Include definitions common to linux pentium targets
-include $(CONFIG)/os/CONFIG.Common.linux-x86
-
-ARCH_DEP_CFLAGS += -march=i686
-
-# remove warning in anyscalar.h
-ARCH_DEP_CXXFLAGS += -fno-strict-aliasing

configure/os/CONFIG.Common.SL6-x86_64

@@ -1,5 +0,0 @@
-# Include definitions common to linux pentium targets
-include $(CONFIG)/os/CONFIG.Common.linux-x86_64
-
-# remove warning in anyscalar.h
-ARCH_DEP_CXXFLAGS += -fno-strict-aliasing

configure/os/CONFIG.Common.SL6-x86_64-clang

@@ -1 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.linux-clang

configure/os/CONFIG.Common.T2-ppc604

@@ -1,8 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
-VXWORKS_VERSION = 5.5.1
-WIND_BASE = /afs/psi.ch/project/vxworks/Tornado2.2.1
-
-#there is a problem with our ccppc and optimization
-# -O0 works, -O and -O1 and higher are buggy
-OPT_CFLAGS_YES = -O0
-OPT_CXXFLAGS_YES = -O0

configure/os/CONFIG.Common.V62-ppc604

@@ -1,2 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
-VXWORKS_VERSION = 6.2

configure/os/CONFIG.Common.V63-ppc603

@@ -1,5 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc603_long
-VXWORKS_VERSION = 6.3
-
-# Buggy "uninitialized variable" warning produces many false positives
-ARCH_DEP_CXXFLAGS += -Wno-uninitialized

configure/os/CONFIG.Common.V63-ppc604

@@ -1,5 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
-VXWORKS_VERSION = 6.3
-
-# Buggy "uninitialized variable" warning produces many false positives
-ARCH_DEP_CXXFLAGS += -Wno-uninitialized

configure/os/CONFIG.Common.V66-ppc603

@@ -1,2 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc603_long
-VXWORKS_VERSION = 6.6

configure/os/CONFIG.Common.V66-ppc604

@@ -1,2 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
-VXWORKS_VERSION = 6.6

configure/os/CONFIG.Common.V67-ppc604

@@ -1,5 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.vxWorks-ppc604_long
-VXWORKS_VERSION = 6.7
-
-#needed when including memPartLib.h, e.g. through moduleLib.h or loadLib.h
-ARCH_DEP_CFLAGS += -D_VSB_CONFIG_FILE='<../lib/h/config/vsbConfig.h>'

configure/os/CONFIG.Common.eldk42-ppc4xxFP

@@ -1,25 +0,0 @@
-# DeltaTau PowerPMAC with ELDK 4.2
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-COMMANDLINE_LIBRARY = READLINE_NCURSES
-
-ARCH_CLASS = ppc
-
-ELDK=/opt/eldk-4.2
-GNU_TARGET=ppc_4xxFP
-GNU_DIR=$(ELDK)/usr
-
-# This cross tool chain is installed in a somehow weired way
-# Without the following lines it does not work on RHEL7
-# but it worked on SL6
-ARCH_DEP_CXXFLAGS += -I $(ELDK)/$(GNU_TARGET)/usr/include/c++/4.2.2
-ARCH_DEP_CXXFLAGS += -I $(ELDK)/$(GNU_TARGET)/usr/include/c++/4.2.2/powerpc-linux
-ARCH_DEP_CXXFLAGS += -I $(ELDK)/$(GNU_TARGET)/usr/include/c++/4.2.2/backward
-
-ARCH_DEP_LDFLAGS += -Wl,-rpath-link,$(ELDK)/$(GNU_TARGET)/lib
-ARCH_DEP_LDFLAGS += -Wl,-rpath-link,$(ELDK)/$(GNU_TARGET)/usr/lib
-
-# Some drivers complain
-ARCH_DEP_CFLAGS += -fno-strict-aliasing

configure/os/CONFIG.Common.eldk51-ppc4xxSF

@@ -1,14 +0,0 @@
-# Virtex FPGA embedded Processor with ELDK 5.1
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-ARCH_CLASS = ppc
-
-SDK = eldk
-SDK_DIR = /opt/eldk-5.1
-SDK_HOST_ARCH = $(GNU_HOST_ARCH)-$(SDK)-$(GNU_HOST_OS)
-GNU_TARGET = powerpc-4xx-softfloat
-GNU_ARCH = ppc405-linux
-GNU_DIR = $(SDK_DIR)/$(GNU_TARGET)/sysroots/$(SDK_HOST_ARCH)/usr
-GNU_BIN = $(GNU_DIR)/bin/$(GNU_ARCH)

configure/os/CONFIG.Common.eldk52-e500v2

@@ -1,15 +0,0 @@
-# IOxOS IFC1210 with ELDK 5.2
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-ARCH_CLASS = ppc
-
-SDK = eldk
-SDK_DIR = /opt/eldk-5.2
-SDK_HOST_ARCH = $(GNU_HOST_ARCH)-$(SDK)-$(GNU_HOST_OS)
-GNU_TARGET = powerpc-e500v2
-GNU_ARCH = ppce500v2-linux-gnuspe
-GNU_DIR = $(SDK_DIR)/$(GNU_TARGET)/sysroots/$(SDK_HOST_ARCH)/usr
-GNU_BIN = $(GNU_DIR)/bin/$(GNU_ARCH)
-GNU_TARGET_INCLUDE_DIR =

configure/os/CONFIG.Common.eldk53-ppc4xxFP

@@ -1,21 +0,0 @@
-# DeltaTau PowerPMAC with ELDK 5.2
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-ARCH_CLASS = ppc
-
-SDK = eldk
-SDK_DIR = /opt/eldk-5.3
-SDK_HOST_ARCH = $(GNU_HOST_ARCH)-$(SDK)-$(GNU_HOST_OS)
-GNU_ARCH = ppc440e-linux
-SDKTARGETSYSROOT=$(SDK_DIR)/powerpc-4xx/sysroots
-GNU_DIR = $(SDKTARGETSYSROOT)/$(SDK_HOST_ARCH)/usr
-GNU_BIN = $(GNU_DIR)/bin/$(GNU_ARCH)
-GNU_TARGET_INCLUDE_DIR =
-GNU_TARGET=powerpc-linux
-
-ARCH_DEP_CPPFLAGS =  -m32 -mcpu=440fp -mhard-float
-ARCH_DEP_CPPFLAGS += --sysroot=$(SDKTARGETSYSROOT)/$(GNU_ARCH)
-ARCH_DEP_LDFLAGS =   --sysroot=$(SDKTARGETSYSROOT)/$(GNU_ARCH)
-AS=$(GNU_BIN)/$(GNU_TARGET)-as

configure/os/CONFIG.Common.fslqoriq20-e6500_64

@@ -1,23 +0,0 @@
-# IOxOS IFC1211 with Freescale QorIQ 2.0 toolchain
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-ARCH_CLASS = ppc
-
-SDK = fslsdk
-SDK_DIR = /opt/fsl-qoriq/2.0
-SDK_HOST_ARCH = $(GNU_HOST_ARCH_64)-$(SDK)-$(GNU_HOST_OS)
-SDK_TARGET = ppc64e6500-fsl-linux
-GNU_TARGET = powerpc64-fsl-linux
-SDKTARGETSYSROOT = $(SDK_DIR)/sysroots/$(SDK_TARGET)
-GNU_DIR = $(SDK_DIR)/sysroots/$(SDK_HOST_ARCH)/usr
-GNU_BIN = $(GNU_DIR)/bin/$(GNU_TARGET)
-
-ARCH_DEP_CPPFLAGS = --sysroot=$(SDKTARGETSYSROOT)
-ARCH_DEP_CFLAGS = -mcpu=e6500 -m64 -mhard-float
-ARCH_DEP_LDFLAGS = --sysroot=$(SDKTARGETSYSROOT)
-
-# warning -O2 and higher are broken!
-#OPT_CFLAGS_YES = -O1
-#OPT_CXXFLAGS_YES = -O1

configure/os/CONFIG.Common.linux-clang

@@ -1,5 +0,0 @@
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-GNU         = NO
-CMPLR_CLASS = clang
-CC          = clang
-CCC         = clang++

configure/os/CONFIG.Common.moxa42-armv6l

@@ -1,19 +0,0 @@
-# Moxa DA-66x with SDK 4.2 and ARM7 processor
-
-# Include definitions common to all Linux ARM targets
-include $(CONFIG)/os/CONFIG.Common.linux-arm
-
-GNU_DIR=/afs/psi.ch/project/embeddedlinux/moxa/arm-linux-4.4.2-v4
-GNU_TARGET=arm
-ARCH_DEP_LDFLAGS+=-Wl,-rpath-link,$(GNU_DIR)/arm-none-linux-gnueabi/lib
-ARCH_DEP_LDFLAGS+=-Wl,-rpath-link,$(INSTALL_LIB)
-
-COMMANDLINE_LIBRARY = READLINE_NCURSES
-
-# suppress note "the mangling of 'va_list' has changed in GCC 4.4"
-ARCH_DEP_CXXFLAGS += -Wno-psabi
-
-ARCH_DEP_CFLAGS += -funwind-tables
-
-# remove warning in anyscalar.h
-ARCH_DEP_CXXFLAGS += -fno-strict-aliasing

configure/os/CONFIG.Common.mvl40-xscale_be

@@ -1,15 +0,0 @@
-# Moxa DA-66x with Montavista Linux 4.0
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-COMMANDLINE_LIBRARY = READLINE_CURSES
-
-ARCH_CLASS = xscale
-
-GNU_DIR=/afs/psi.ch/project/embeddedlinux/moxa/xscale_be/armv5teb-montavista-linuxeabi
-
-ARCH_DEP_CFLAGS += -funwind-tables
-
-# Cannot build PVA because of missing boost support
-SKIP_BUILDS = pv% normativeTypes

configure/os/CONFIG.Common.raspbian-arm

@@ -1,41 +0,0 @@
-# RaspberryPi with github.com/raspberrypi/tools toolchain
-# Tested on:
-# * Raspberry 3B+ Raspbian 9
-# * Raspberry 2   Raspbian 7
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-# Using readline:
-# Due to missing/messed up libs in the toolchain, readline needs copies of
-# libtinfo.so.5.9 and libreadline.so.6.2 from a Raspbian 7 rootfs
-# /lib/arm-linux-gnueabihf/ to the toolchain, e.g.
-# $(SDK_DIR)/gcc-linaro-arm-linux-gnueabihf-raspbian/arm-linux-gnueabihf/libc/lib/arm-linux-gnueabihf/
-# and manually created links libtinfo.so.5 and libreadline.so.
-# For gcc-linaro-arm-linux-gnueabihf-raspbian, an existing incompatible
-# libtinfo.so.5 is in the way. Remove it.
-# (Built with glibc 2.16 like installed on Raspbian 9 but toolchain uses glibc 2.13.)
-# Also copy /usr/include/readline/ directory from some readline 6 installation
-# to $(SDK_DIR)/gcc-linaro-arm-linux-gnueabihf-raspbian/arm-linux-gnueabihf/libc/usr/include/
-
-ARCH_CLASS = arm
-
-SDK_DIR = /opt/raspberrypi/arm-bcm2708
-
-# Available SDK_TARGETs:
-
-# gcc 4.8.3 for 32 bit hosts with GLIBC 2.3 or higher
-SDK_TARGET = gcc-linaro-arm-linux-gnueabihf-raspbian
-
-# gcc 4.8.3 for 64 bit hosts with GLIBC 2.14 or higher
-# SDK_TARGET = gcc-linaro-arm-linux-gnueabihf-raspbian-x64
-
-# gcc 4.7.1 for 64 bit hosts with GLIBC 2.8 or higher
-# SDK_TARGET = arm-linux-gnueabihf
-
-# gcc 4.7.1 for 32 bit hosts with GLIBC 2.4 or higher
-# SDK_TARGET = arm-bcm2708hardfp-linux-gnueabi
-# SDK_TARGET = arm-bcm2708-linux-gnueabi
-
-GNU_DIR = $(SDK_DIR)/$(SDK_TARGET)
-GNU_TARGET = $(if $(filter arm-bcm2708%,SDK_TARGET),$(SDK_TARGET),arm-linux-gnueabihf)

configure/os/CONFIG.Common.vxWorks-ppc603

@@ -13,7 +13,7 @@ CMPLR_SUFFIX = ppc
 ARCH_CLASS = ppc
 
 # Architecture specific build flags
-ARCH_DEP_CPPFLAGS = -DCPU=PPC603
+ARCH_DEP_CPPFLAGS = -DCPU=PPC603  
 ARCH_DEP_CFLAGS = -mcpu=603 -mstrict-align
 
 GNU_TARGET = powerpc-wrs-vxworks

configure/os/CONFIG.Common.vxWorksCommon

@@ -1,7 +1,7 @@
 # CONFIG.Common.vxWorksCommon
 #
 # Definitions for vxWorks target archs
-# Override these definitions in CONFIG_SITE.Common.vxWorksCommon
+# Sites may override these definitions in CONFIG_SITE.Common.vxWorksCommon
 # or CONFIG_SITE.<host>.vxWorksCommon
 #-------------------------------------------------------
 
@@ -63,6 +63,8 @@ VXWORKS_MAJOR_VERSION = $(basename $(basename $(VXWORKS_VERSION)))
 
 # These are needed for vxWorks 6.x; the GNU toolset version number
 # is in the path to the compiler tools:
+VX_GNU_VERSION_5.4 = 2.95
+VX_GNU_VERSION_5.5 = 2.96
 VX_GNU_VERSION_6.0 = 3.3.2
 VX_GNU_VERSION_6.1 = 3.3.2
 VX_GNU_VERSION_6.2 = 3.3.2
@@ -78,21 +80,30 @@ VX_GNU_VERSION = $(VX_GNU_VERSION_$(VXWORKS_VERSION))
 VX_GNU_MAJOR_VERSION = $(basename $(basename $(VX_GNU_VERSION)))
 
 #--------------------------------------------------
-# Fix old Linux WIND_HOST_TYPE
+# Fix WIND_BASE for vxWorks 6.x on linux
+# NB: We know the value of WIND_HOST_TYPE here, but not VXWORKS_VERSION
 ifeq ($(WIND_HOST_TYPE),x86-linux)
-  WIND_HOST_TYPE = x86-linux2
+  WIND_HOST_TYPE_5 = x86-linux
+  WIND_HOST_TYPE_6 = x86-linux2
+  WIND_HOST_TYPE = $(WIND_HOST_TYPE_$(VXWORKS_MAJOR_VERSION))
 endif
 
 #--------------------------------------------------
 # vxWorks directory definitions
-VX_DIR = $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)
+VX_DIR_5 = $(WIND_BASE)
+VX_DIR_6 = $(WIND_BASE)/vxworks-$(VXWORKS_VERSION)
+VX_DIR = $(VX_DIR_$(VXWORKS_MAJOR_VERSION))
 
-GNU_TARGET_INCLUDE_DIR = $(VX_DIR)/target/h $(VX_DIR)/target/h/wrn/coreip
+VX_INCLUDE_DIRS_5 = $(VX_DIR)/target/h
+VX_INCLUDE_DIRS_6 = $(VX_DIR)/target/h $(VX_DIR)/target/h/wrn/coreip
+GNU_TARGET_INCLUDE_DIR = $(VX_INCLUDE_DIRS_$(VXWORKS_MAJOR_VERSION))
 
 #--------------------------------------------------
 # vxWorks GNU directories
 
-GNU_DIR = $(WIND_BASE)/gnu/$(VX_GNU_VERSION)-vxworks-$(VXWORKS_VERSION)/$(WIND_HOST_TYPE)
+GNU_DIR_5 = $(WIND_BASE)/host/$(WIND_HOST_TYPE)
+GNU_DIR_6 = $(WIND_BASE)/gnu/$(VX_GNU_VERSION)-vxworks-$(VXWORKS_VERSION)/$(WIND_HOST_TYPE)
+GNU_DIR = $(GNU_DIR_$(VXWORKS_MAJOR_VERSION))
 
 #--------------------------------------------------
 # This finds nm on any supported VxWorks version
@@ -102,7 +113,9 @@ NM = $(firstword $(wildcard $(WIND_BASE)/*/$(WIND_HOST_TYPE)/bin/$(NMPROG)))
 
 #--------------------------------------------------
 # A linker script is essential for munching from vxWorks 6.6 onwards
-# (i.e. with versions that use gcc 4.1.2 or later).
+# (i.e. with versions that use gcc 4.1.2 or later).  It can be used
+# with any vxWorks 5 or 6 version, but apparently should not be used
+# when compiling for 68K (which isn't supported in vxWorks 6 anyway)
 MUNCH_LDFLAGS_6 = -T $(VX_DIR)/target/h/tool/gnu/ldscripts/link.OUT
 MUNCH_LDFLAGS = $(MUNCH_LDFLAGS_$(VXWORKS_MAJOR_VERSION))
 
@@ -118,10 +131,11 @@ export TOOL_FAMILY = GNU
 OP_SYS_CPPFLAGS += -DvxWorks=vxWorks
 OP_SYS_CFLAGS += -fno-builtin
 
-# Fix for vxWorks headers that use macros defined in vxWorks.h but
+# Fix for vxWorks 5 headers that use macros defined in vxWorks.h but
 # which don't actually include vxWorks.h themselves, for example the
 # target/h/sys/stat.h file which uses ULONG.  This also stops dbDefs.h
-# from defining the OFFSET macro, which generates lots of warnings.
+# from defining the OFFSET macro, which generates lots of warnings in
+# both vxWorks 5 and 6.
 OP_SYS_INCLUDE_CPPFLAGS += -include $(VX_DIR)/target/h/vxWorks.h
 
 #--------------------------------------------------
@@ -134,6 +148,7 @@ OPT_CXXFLAGS_YES = -O2
 CODE_CFLAGS =
 #
 # For vxWorks versions before 6.3 we need this g++ compiler flag
+CODE_CXXFLAGS_5 = -fno-implicit-templates
 CODE_CXXFLAGS_6.0 = -fno-implicit-templates
 CODE_CXXFLAGS_6.1 = -fno-implicit-templates
 CODE_CXXFLAGS_6.2 = -fno-implicit-templates
@@ -146,10 +161,8 @@ SHRLIB_CFLAGS =
 SHRLIB_LDFLAGS =
 
 #--------------------------------------------------
-# Don't use gcc 2.x for dependency generation
-
-HDEPENDS_METHOD_2 = MKMF
-HDEPENDS_METHOD = $(firstword $(HDEPENDS_METHOD_$(VX_GNU_MAJOR_VERSION)) COMP)
+# Earlier versions of gcc don't understand -MF
+HDEPENDS_COMPFLAGS = -MM > $@
 
 #--------------------------------------------------
 # osithead use default stack, YES or NO override
@@ -173,8 +186,10 @@ VXCPPFLAGS = $(filter-out $(OP_SYS_INCLUDE_CPPFLAGS),$(CPPFLAGS))
 PREPROCESS.cpp = $(CPP) $(VXCPPFLAGS) $(INCLUDES) $< > $@
 
 #--------------------------------------------------
-# Use LEDLIB for command-line editing
-COMMANDLINE_LIBRARY = LEDLIB
+# Don't use gcc 2.x for dependency generation
+
+HDEPENDS_METHOD_2 = MKMF
+HDEPENDS_METHOD = $(firstword $(HDEPENDS_METHOD_$(VX_GNU_MAJOR_VERSION)) COMP)
 
 #--------------------------------------------------
 # Allow site overrides

configure/os/CONFIG.Common.yocto21-aarch64

@@ -1,18 +0,0 @@
-# XILINX Zynq with Yocto 2.1 / Petalinux toolchain
-
-# Include definitions common to all Linux targets
-include $(CONFIG)/os/CONFIG.Common.linuxCommon
-
-ARCH_CLASS = arm64
-
-SDK = petalinux
-SDK_DIR = /opt/petalinux-gfa/2017.2
-SDK_HOST_ARCH = $(GNU_HOST_ARCH_64)-$(SDK)-$(GNU_HOST_OS)
-SDK_TARGET = aarch64-xilinx-linux
-GNU_TARGET = $(SDK_TARGET)
-SDKTARGETSYSROOT = $(SDK_DIR)/sysroots/$(SDK_TARGET)
-GNU_DIR = $(SDK_DIR)/sysroots/$(SDK_HOST_ARCH)/usr
-GNU_BIN = $(GNU_DIR)/bin/$(GNU_TARGET)
-
-ARCH_DEP_CPPFLAGS = --sysroot=$(SDKTARGETSYSROOT)
-ARCH_DEP_LDFLAGS = --sysroot=$(SDKTARGETSYSROOT)

configure/os/CONFIG.RHEL7-x86_64.Common

@@ -1,3 +0,0 @@
-#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
-#Include definitions common to linux hosts
-include $(CONFIG)/os/CONFIG.linux-x86_64.Common

configure/os/CONFIG.RHEL7-x86_64.RHEL7-x86_64

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.RHEL7-x86_64.SL6-x86

@@ -1,16 +0,0 @@
-# "cross compile" for older Linux version
-# Use older compiler and older libraries
-# Used packages:
-# compat-gcc-44-c++-4.4
-# compat-gcc-44-4.4
-# compat-glibc-headers-2.12-4
-# It was neccessary to install 32 bit compatibility libraries manually
-#-------------------------------------------------------
-
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
-CC = $(GNU_BIN)/$(CMPLR_PREFIX)gcc44
-CCC = $(GNU_BIN)/$(CMPLR_PREFIX)g++44
-
-TARGET_CPPFLAGS = -isystem /usr/lib/x86_64-redhat-linux6E/include
-TARGET_LDFLAGS = -L /usr/lib/x86_64-redhat-linux6E/lib
-LINK.cpp += --as-needed -lc -lm -lrt -lpthread -lreadline -ltinfo

configure/os/CONFIG.RHEL7-x86_64.SL6-x86_64

@@ -1,16 +0,0 @@
-# "cross compile" for older Linux version
-# Use older compiler and older libraries
-# Used packages:
-# compat-gcc-44-c++-4.4
-# compat-gcc-44-4.4
-# compat-glibc-headers-2.12-4
-# compat-glibc-2.12-4
-#-------------------------------------------------------
-
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86
-CC = $(GNU_BIN)/$(CMPLR_PREFIX)gcc44
-CCC = $(GNU_BIN)/$(CMPLR_PREFIX)g++44
-
-TARGET_CPPFLAGS = -isystem /usr/lib/x86_64-redhat-linux6E/include
-TARGET_LDFLAGS = -L /usr/lib/x86_64-redhat-linux6E/lib64
-LINK.cpp += --as-needed -lc -lm -lrt -lpthread -lreadline -ltinfo

configure/os/CONFIG.SL5-x86.Common

@@ -1,3 +0,0 @@
-#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
-#Include definitions common to linux hosts
-include $(CONFIG)/os/CONFIG.linux-x86.Common

configure/os/CONFIG.SL5-x86.SL5-x86

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.SL5-x86_64.Common

@@ -1,3 +0,0 @@
-#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
-#Include definitions common to linux hosts
-include $(CONFIG)/os/CONFIG.linux-x86_64.Common

configure/os/CONFIG.SL5-x86_64.SL5-x86_64

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.SL6-x86.Common

@@ -1,2 +0,0 @@
-#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
-#Include definitions common to linux hosts

configure/os/CONFIG.SL6-x86.SL6-x86

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.SL6-x86_64.Common

@@ -1,3 +0,0 @@
-#CONFIG.$(EPICS_HOST_ARCH).Common is required by build system
-#Include definitions common to linux hosts
-include $(CONFIG)/os/CONFIG.linux-x86_64.Common

configure/os/CONFIG.SL6-x86_64.SL6-x86

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.SL6-x86_64.SL6-x86_64

@@ -1,2 +0,0 @@
-# Include common linux definitions
-include $(CONFIG)/os/CONFIG.linux-x86.linux-x86

configure/os/CONFIG.UnixCommon.Common

@@ -8,7 +8,7 @@
 CP = cp
 MV = mv
 RM = rm -f
-MKDIR = mkdir -p
+MKDIR = mkdir
 RMDIR = rm -rf
 CAT = cat
 

configure/os/CONFIG.darwinCommon.darwinCommon

@@ -65,7 +65,7 @@ GNU = NO
 #
 # Darwin shared libraries
 #
-SHRLIB_LDFLAGS = -dynamiclib -flat_namespace -undefined dynamic_lookup \
+SHRLIB_LDFLAGS = -dynamiclib -undefined dynamic_lookup \
     -install_name $(shell $(FULLPATHNAME) $(INSTALL_LIB))/$@ \
     $(addprefix -compatibility_version , $(SHRLIB_VERSION)) \
     $(addprefix -current_version , $(SHRLIB_VERSION))

configure/os/CONFIG.linux-386.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-486.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-586.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-686.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-x86.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.linux-x86_64.Common

@@ -7,4 +7,4 @@
 #Include definitions common to unix hosts
 include $(CONFIG)/os/CONFIG.UnixCommon.Common
 
-WIND_HOST_TYPE = x86-linux2
+WIND_HOST_TYPE = x86-linux

configure/os/CONFIG.win32-x86.Common

@@ -26,5 +26,3 @@ endif
 # Needed to find dlls for base installed build tools (antelope,eflex,...)
 PATH := $(EPICS_BASE_BIN):$(PATH)
 
-# Silence the tr1 namespace deprecation warnings
-USR_CXXFLAGS_WIN32 += -D_SILENCE_TR1_NAMESPACE_DEPRECATION_WARNING

configure/os/CONFIG_SITE.Common.RTEMS-pc386

@@ -0,0 +1,3 @@
+#
+# Site-specific overrides for RTEMS-pc386 target
+#

configure/os/CONFIG_SITE.Common.RTEMS-pc386-qemu

@@ -1,9 +0,0 @@
-# CONFIG_SITE.Common.RTEMS-pc386-qemu
-#
-# Site-specific overrides for the RTEMS-pc386-qemu target
-#
-
-# If you're building this architecture you _probably_ want to
-# run the tests for it under QEMU, but if not you can turn
-# them off here by commenting out this line:
-CROSS_COMPILER_RUNTEST_ARCHS += RTEMS-pc386-qemu

configure/os/CONFIG_SITE.Common.UnixCommon

@@ -1,2 +0,0 @@
-SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)
-LOADABLE_SHRLIB_SUFFIX = $(SHRLIB_SUFFIX_BASE)

configure/os/CONFIG_SITE.Common.linux-arm

@@ -1,39 +1,35 @@
 # CONFIG_SITE.Common.linux-arm
 #
-# Site Specific definitions for all linux-arm targets
-#-------------------------------------------------------
+# Site-specific settings for the linux-arm target
 
-# NOTE for SHARED_LIBRARIES: In most cases if this is set to YES the
+# NOTE: In most cases if SHARED_LIBRARIES is set to YES the
 # shared libraries will be found automatically.  However if the .so
 # files are installed at a different path to their compile-time path
 # then in order to be found at runtime do one of these:
 # a) LD_LIBRARY_PATH must include the full absolute pathname to
 #    $(INSTALL_LOCATION)/lib/$(EPICS_HOST_ARCH) when invoking base
 #    executables.
-# b) Add the runtime path to SHRLIB_DEPLIB_DIRS and PROD_DEPLIB_DIRS, which 
+# b) Add the runtime path to SHRLIB_DEPLIB_DIRS and PROD_DEPLIB_DIRS, which
 #    will add the named directory to the list contained in the executables.
 # c) Add the runtime path to /etc/ld.so.conf and run ldconfig
 #    to inform the system of the shared library location.
 
-# Depending on your version of Linux you'll want one of the following
-# lines to enable command-line editing and history in iocsh.  If you're
-# not sure which, start with the top one and work downwards until the
-# build doesn't fail to link the readline library.  If none of them work,
-# comment them all out to build without readline support.
 
-# No other libraries needed (recent Fedora, Ubuntu etc.):
-#COMMANDLINE_LIBRARY = READLINE
+# Use GNU Readline if the header file is installed
+COMMANDLINE_LIBRARY = $(strip $(if $(wildcard \
+    $(firstword $(READLINE_DIR) $(GNU_DIR))/include/readline/readline.h), \
+  READLINE, EPICS))
 
-# Needs -lncurses (RHEL 5 etc.):
+# If libreadline needs additional libraries to be linked with it, try
+# uncommenting each of the lines below in turn, starting with the top
+# one and working downwards, until the build succeeds. Do a 'make rebuild'
+# from the top of the Base tree after changing this setting.
+
+# Needs -lncurses:
 #COMMANDLINE_LIBRARY = READLINE_NCURSES
 
-# Needs -lcurses (older versions)
+# Needs -lcurses:
 #COMMANDLINE_LIBRARY = READLINE_CURSES
 
-
-# It makes sense to include debugging symbols even in optimized builds
-# in case you want to attach gdb to the process or examine a core-dump.
-# This does cost disk space, but not memory as debug symbols are not
-# loaded into RAM when the binary is loaded.
-OPT_CFLAGS_YES += -g
-OPT_CXXFLAGS_YES += -g
+# Readline is broken or you don't want use it:
+#COMMANDLINE_LIBRARY = EPICS