b35a8f0650
ctb server updated
2019-04-04 11:51:37 +02:00
5131245f0a
all servers except eiger: easier to update firmware and software using update or copydetectorserver, rebootcontroller, and programfpga
2019-04-02 17:27:01 +02:00
c7ad548e4c
conflict git fix
2019-03-26 15:01:58 +01:00
8c2ee57591
ctb/moench server: clock fix, max shifts per clock is calculated everytime
2019-03-25 14:41:15 +01:00
cd5aea895b
jungfrau server: changes for new firmware, aligning adc deserializer. ctb serveR: removed unnecessary pll reset and polling mode for pll
2019-03-22 15:09:29 +01:00
44f0dfc3c0
ctbserver: updated firmware version and api
2019-03-19 18:58:42 +01:00
7d3d2a8b31
ctb and moench server: pll vco clock changed from 400 to 800,ctb server: max adc clock from 40 to 65MHz
2019-03-13 16:03:11 +01:00
ec18db868f
ctb, moench, jungfrau server: changing phase only changes one clock in one direction. ctb and moench phase shift connected to adc clk, instead of run clk
2019-03-13 08:37:45 +01:00
658438df3b
ctb moench server update: (fw update): det id changed, status reg looks at anyfifofull instead of somefifofull, datapresent looks at corresponding analog/digital fifo empty, usleep after read strobe to sync different clock
2019-03-07 17:36:35 +01:00
0765b330f1
ctb and moench, exptime connects to set pattern wait time with level 0
2019-03-06 15:17:54 +01:00
d3c1193a71
ctb/moench server, fixed frequency configuring bug, readpattern sleep, detectormode command, jsonheader set even if rxr offline, set speed returnvalue is value not ok/fail, rxr printout missingpackets 64 bit
2019-03-06 10:25:16 +01:00
35b1ad39f7
ctb moench: feature to set digital io pin delay, changed print from unsuccessful to failed, maxpatternlength in server is inclusive
2019-03-01 10:45:01 +01:00
302d9f0633
ctb server: back to 10g def
2019-02-28 08:51:07 +01:00
f80483de6e
ctb server: (bug fixes, udp sending feature instead of tcp, better debugging prints,
...
digital readout mode (fifoempty flag in status register is always up, so it is idle for this readout mode),
pattern loop bugs, max_pattern_length redefined in server side, do not update period for ctb and moench in setreceiver
2019-02-28 08:46:26 +01:00
09546a8632
ctb server:
...
- allowed flags resetfpga and programfpga for moench and ctb
- set a minimum voltage for vio as it powers the fpga (1200mV)
- changed the min and max for vchip and power regulators due to tolerance
- fixed pattern read function
- fixed minor bugs with input of ctb patterns(waittime) and mode other than 1
- fixed calibration current register for i2c for tolerance (/1.2268)
- fixed current readout of i2c
- added digital, analog and normal readouts for flags
2019-02-20 15:36:34 +01:00
775bde76c9
ctb server: power regulator adjusted for precision
2019-02-20 09:34:55 +01:00
c93f88b7e5
ctb server: fixed dacs, power regulators and vchip
2019-02-15 17:08:49 +01:00
076faa62e0
ctb server: server starts up good. Need to debug each function in detail
2019-02-06 15:50:44 +01:00
1bbb352743
jungfrau server: pll moved out to remove redundancy
2019-01-11 14:48:58 +01:00
b1570bde9c
updated max1932, modified ltc2620
2019-01-09 17:41:10 +01:00
06a6d53a3f
gotthard, cmakefiles language line removed
2019-01-04 16:34:34 +01:00
f161d68efc
fix in ltc, added moench, separated servers, left to do max1932, client side for moench and more detailed in ctb server side
2018-12-19 16:38:18 +01:00
79693a38f5
in between
2018-12-12 11:20:27 +01:00
8f3f9caf2b
almost done with ctb update, need to do slow adcs, split to moench and ctb
2018-11-30 10:39:26 +01:00
