readout speed added to json and h5 master files.
Also fixed master file inconsistencies
Sserver binaries
- update server binaries because readoutspeed needs to be sent to receiver with rx_hostname command
API
- added const to Detector class set/getburstmode
Python
- updated python bindings (burstmode const and roi arguments)
Cmd generation
- added pragma once in Caller.in.h as Caller is included in test files
m3: num channels due to #counters < 3
* workaround for m3 for messed up num channels (client always assumes all counters enabled and adds them to num channels), fix for hdf5
g2: exptime master file inconsistency
- exptime didnt match because of round of when setting burst mode (sets to a different clk divider)
- so updating actual time for all timers (exptime, period, subexptime etc, ) in Module class, get timer values from detector when setting it and then send to receiver to write in master file
ctb image size incorrect:
- write actual size into master file and not the reserved size (digital reduces depending on dbit list and dbit offset)
- added a calculate ctb image size free function in generalData.h that is used there as well as for the tests.
master file inconsistencies
- refactored master attributes writing using templates
- names changed to keep it consistent between json and hdf5 master file (Version, Pixels, Exposure Times, GateDelays, Acquisition Period, etc.)
- datatypes changed to keep it simple where possible: imageSize, dynamicRange, tengiga, quad, readnrows, analog, analogsamples, digital, digitalsamples, dbitreorder, dbitoffset, transceivermask, transeiver, transceiversamples, countermask, gates =>int
- replacing "toString" with arrays, objects etc for eg for scan, rois, etc.
- json header always written (empty dataset or empty brackets)
- hdf5 needs const char* so have to convert strings to it, but taking care that strings exist prior to push_back
- master attributes (redundant string literals->error prone
tests for master file
- suppressed deprecated functions in rapidjson warnings just for the tests
- added slsREceiverSoftware/src to allow access to receiver_defs.h to test binary/hdf5 version
- refactored acquire tests by moving all the acquire tests from individual detector type files to a single one=test-Caller-acquire.cpp
- set some default settings (loadBasicSettings) for a basic acquire at load config part for the test_simulator python scripts. so minimum number of settings for detector to be set for any acquire tests.
- added tests to test master files for json and hdf5= test-Caller-master-attributes.cpp
- added option to add '-m' markers for tests using test_simulator python script
* slsSupportLib done, at receiver rooting out in implementation
* removed from receiver and client
* removed everywhere except gui, python and client(commands.yaml and Detector.h)
* updated python
* fixed autocomplete to print what the issue is if there is one with ToString when running the autocomplete script to generate fixed.json. updated readme.md in generator folder
* formatting
* removed enums for dacs
* udpating autocomplete and generating commands
* removed gotthard from docs and release notes
* removed dac test
* bug from removing g1
* fixed virtual test for xilinx, was minor. so in this PR
* gui done
* binary in merge fix
* formatting and removing enums
* updated fixed and dump.json
* bash autocomplete
* updated doc on command line generation
* removing increments in dac enums for backward compatibility. Not required
* removed ROI from rxParameters (only in g1), not needed to be backward compatible
* removed the phase shift option from det server staruip
* updated RegisterDefs.h from firmware update
* Revert "updated RegisterDefs.h from firmware update"
This reverts commit 64f1b2546e.
* updated registers and had it formatted
* Revert "updated registers and had it formatted"
This reverts commit 1641b705b0.
* udpated registers from firmware, reading config file in server (chip config, reset chip, enable_clock_pattern) specific for matterhorn,this is done when powering on chip, removed startreadout, fixed status register bits, updated firmware version
* fix for patioctrl allowed for zxilinx and adding readout pattern for scientists that like to push the acquire button
* fixing default enable clock and readout pattern for xilinx (patioctrl has to be 32 bit)
* Xilinxctb/first image (#1094)
* reduce xilinxCTB readout done checks to single register, increased clockEna pattern limits, clear FPGA FiFos and counters on powerchip, disable counters 1-3 in matterhorn configuration
* change print of xilinxctb server
* remove acquisition done check
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
* binary xilinx in
* formatting
* added reset of udp buffer FIFO to xilinxCTB
---------
Co-authored-by: Martin Mueller <72937414+mmarti04@users.noreply.github.com>
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
* jf wip: bunch id decoder only in pcb v2.0 check and comments
* auto comp disable the same way for both chip versions. compdisabletime also available for 1.1 now
* fixed tests
* formatting
* binary in
* cli: patwaittime also takes time argument, api: patwaitclocks and patwaitinterval, tcp: patwaitinterval is 2 functions for set and get, patwaitclocks remains a single for backward compatibility with -1 for get, server (loadpattern): clks using member names (needs to be refactored). needs tobe discussed what to do with pattern files.
* all tests passed
* fixed test
* exptime deprecated for ctb and xilinx
* pyctbgui..not there yet
* fixed in pyctbgui
* removed redundant warning for ctb and xilinx exptime in Detector class (already in module class handling all exptime signatures), patwait, patloop and patnloop have to be non inferrable commands because of support for old commands (level as suffix)
* fix formatting error from command line parsing
* fix tests for patwaittime
* usleep in communication to actually relay the err message of memory allocation to the client (weird but test for now), function in server to handle memory allcoation issues (updates mess, ret and sendsit to the client and returns prior from function implementatin, setting fnum in client for the speicific functions that send to detector each argument separtely, they need to remember the fnum else they throw with the incorrect fnum
* server: every malloc must check if it succeeded, rearranging so that the free is clear as well (only in funcs so far)
* fixed malloc checks in other places other than funcs.c
* jf: rolling back firmware required to v1.5 and 2.5, updated release notes, fixed a bug when updating server (when server name same as link name:throws with no message, pedestal mode check changed for the time being for loops to be 0xFF size
* compensating for jf fw bug for pedestalmode where loops should be 16 bit, but is 8 bit in fw. to be fixed in next version
* formatting
* formatting, merge fix
* fixed python test simulator to kill previous servers
* rmeoved merge binary
* g2: chip reconfigure variable not set when powering on at startup because readconfig is the one configuring the chip the first time to default chip settings
* cleaning up code
* fixing nextframenumber properly with firmware
* updated firmware to have getnextframenumber and fixed setnextframenumber to reset also the header fifo when stopping
* fix tests for gotthard2
