- qt4->qt5
- in built qt5 6.1.5 because rhel7 is not upto date with qt5, removed findqwt.cmake
- made a fix in qwt lib (qwt_plot_layout.h) to work with 5.15 and lower versions for qrect constr.
- qt5 forms fixed, qt4 many hard coding forms switched to forms including qtabwidget, scrolls etc, fonts moved to forms
- docking option enabled by default, removed option to disable docking feature from "Mode"
- added qVersionResolve utility functions to handle compatibility before and after qt5.12
- qtplots (ian's code) takes in gain mode enable to set some settings within the class, with proper gain plot ticks
- ensure gain plots have no zooming of z axis in 2d and y axis in 1d
- removed placeholder text in qpalette in main window form as its not supportd until 5.12 (so using qt5.9 designer insted of qt5.15 to cope)
- tab order
Servers:
- fixed some error messages that were empty for fail in funcs (mostly minor as if this error, major issues)
- eiger server: fix for fw workaround where stop acquisition processing done signal does not come up, by removing reset in stop acquisition and waiting for2 seconds for feb done processing signal to go down, if it doesnt, throw if status is not idle.
- error messages not setup for some eiger server errors
- quad fix (chip signals to trim quad, both left and right registers can be different)
- minor logical error of no consequence (stop acquisition returns a different enum than expected)
* badchannels for m3 and modify for g2 (file from single and multi)
* m3: invert polarity of bit 7 and 11 signals from setmodule, allow commas in bad channel file
* badchannel file can take commas, colons and comments (also taking care of spaces at the end of channel numbers)
* tests 'badchannels' and 'Channel file reading' added, removing duplicates in badchannel list, defining macro for num counters in client side
* fix segfault when list from file is empty,
* fix tests assertion for ctbconfig (adding message) for c++11
* fixed badchannels in m3server (clocking in trimming)
* badchannel tests can be run from any folder (finds the file)
* initital implementation
* datetime replaces with sls::Duration in Python C bindings
* using custom type caster
* fix for conversion to seconds
* added set_count in python
* common header for pybind11 includes
authored-by: Erik Frojdh <erik.frojdh@psi.ch>
* g2: new hdi values, write hdi value to reg, set slave/master to reg, able to set master from server config file, server command line and client
* print versions for virtual as well
* udp socket refactor from reuss: closing socket before throwing for bind error in constructor, closing socket at destructor and not at shutdown to allow other thread to read with a -1, so the object can still be accessed
* check for size of packet for every detector
* nullptr to unique ptr to call its destructor, when deallocating resources moved out of shutdown
* minor
* gui message doesnt show if it has a '>' symbol in error msg
* minor refactoring for readability (size_t calc fifo size)
* refactoring listening udp socket code: activated and datastream dont create udp sockets anyway, rc<=- should be discarded in any case
* wip
* refactoring memory structure access
* wip: bugfix write header + data to binary
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* portRoi no roi effecto on progress
* fail at receiver progress, wip
* segfaults for char pointer in struct
* reference to header to get header and data
* refactoring
* use const defined for size of header of fifo
* updated release notes
* remove pointer in callback for sls_receiver_header pointer
* rx same name arguments in constructors
* rx: same name arguments in constructor
* rx: removing the '_' suffix in class data members
* merge fix
* merge fix
* review fix refactoring
* gui message doesnt show if it has a '>' symbol in error msg
* minor refactoring for readability (size_t calc fifo size)
* refactoring listening udp socket code: activated and datastream dont create udp sockets anyway, rc<=- should be discarded in any case
* wip
* refactoring memory structure access
* wip: bugfix write header + data to binary
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* wip
* portRoi no roi effecto on progress
* fail at receiver progress, wip
* segfaults for char pointer in struct
* reference to header to get header and data
* refactoring
* use const defined for size of header of fifo
* updated release notes
* refactoring from review: fwrite, static_cast
* vicin default changed to 800, only setting vthx directly allows to set dac even if counter disabled, else disable counter, setallthresholdenergy if an energy is -1, get module value, fix that reg was repaced by isettings
* vth3 disabled for interpolation enable, interpolation disable sets counter mask to what it was before (updating old mask whn setting counter mask except for setting all counters for interpolation enable) and enabling vth3 if counter was enabled
* refactor and test for previous commit
* pump probe only has vth2 enabled, handles both pump probe mode and interpolation mode as well
* wip
* refactored pump probe and interpolation and added to setmodule
* check dacs and trimbits out of range for setmodule (not just threshold)
* binaries in
* m3: pump probe and interpolation mutually exclusive
* minor
* added the possibility to save settings file for m3 and eiger
* added save trimbits to gui
* update release notes
* python wip
* moved location of trimbits save option in gui
* python works
* updating getModule with all its parameters in the server side
* updating binaries
* roi structure expanded to have ymin and ymax
* compile with 'detector roi'
* wip
* wip, rx_roi, rx_clearroi
* wip rxroi
* rxroi wip
* wip rxroi
* merge fix
* wip
* rx_roi works, impl wip, test
* tests in, impl left
* wip, rxroi impl
* wip, rxroi impl
* wip
* setrx_Roi works, getrx_roi, wip
* rx_roi impl done
* wip, rxroi
* wip, getrx_roi rxr ports
* fix ports
* wip
* wip
* fix positions on server side
* wip
* numports wip
* wip
* jungfrau top inner interface row increment
* x, y detpos, wip
* removed eiger row indices flipping in gui (bottom flipping maintained)
* wip
* wip, jungfrau numinterfaces2
* jungfrau virtual works
* eiger, jungfrau, g2 virtual server works
* eiger positions fix, wip
* binaries in
* minor printout
* binaries in
* merge fix
* merge fix
* removing getposition
* setrxroi wip
* set upto port
* get messed, wip
* roi multi to module works, wip
* wip
* roi dont return -1
* added rxroi metadata in master file
* added rxroifromshm, not yet in detector
* rx roi in gui with box, also for gap pixels (gappixels for jungfrau mess)
* fix for segfault in gui with detaching roi box in gui
* wip
* m3 gui: slave timing modes should be discarded when squashing
* fixed m3 virtual data, and fixed counters in gui asthetics
* m3 roi works
* wip, g2
* wip
* handling g225um boards, and showing roi for gainplot as well
* udpate python functions
* fix for 1d and a2d roi written
* fixed actual roi written to file
* no virtual hdf5 when handling rx roi
* test
* minor
* binarie in
* inconsistent copy with generalData and implementation members, especially for m3 (non default rxr generic values), issue caught on second configure with non m3 default values, eg tengiga 0
* removing test
* wip, adding m3 functions: polarity, inerpolation, pumpprobe
* added interpol, polarity, pump probe, analog pulsing, digital pulsing
* tests
* binaries in
* update release
* added python polarity enum
* fixed python and minor readability in mythen3.c
* binarie sin
* added all the m3 funcs also in list.c and enablingall counters for enabling interpolation
* binarie sin
