|
|
d096a5efeb
|
jungfrau server: default storage cell start is 0xf
|
2018-04-26 16:30:27 +02:00 |
|
|
|
bc70cc3a26
|
jungfrau server: added storage start, connected auto_comp_disable, changed adcphase, added ADC_PORT_INVERT_VAL, ADC_OFST_HALF_SPEED_VAL, minimum exposure time
|
2018-04-13 17:33:46 +02:00 |
|
|
|
e024774323
|
added storage cells
|
2018-04-13 15:05:43 +02:00 |
|
|
|
5ff2e86060
|
jungfrau server configuring ASIC timer at server startup
|
2018-04-13 11:07:22 +02:00 |
|
|
|
d28f293485
|
jungfrau and eiger server bug fix: module_firmware_version gets stuck as it expects an int, but should have been for module_serial_number
|
2018-04-06 12:15:57 +02:00 |
|
|
|
a36b715eab
|
resolved conflicts from merging 3.1.1 in here
|
2018-03-21 09:03:31 +01:00 |
|
|
|
59ad15b54e
|
eiger server bug fix: in 10giga mode always used the 1g ip (dhcp ip) if detectorip is before tengiga in config file
|
2018-03-20 16:36:45 +01:00 |
|
|
|
688dd15fe9
|
Jungfrau bug fix: cannot give same adcphase value to pll, updated recommended default of adcphase for half speed and quarter speed, updated client manuals for both adcphase and clkdivider
|
2018-03-20 12:12:38 +01:00 |
|
|
|
40210ae26f
|
jungfrauserver adcphase fix: bug was if adcphase was same as previous value, it still shifted
|
2018-03-14 17:20:26 +01:00 |
|
|
|
b58c3e8951
|
solving merging conflicts from 3.1.0 to developer
|
2018-03-14 15:45:35 +01:00 |
|
|
|
fee6465213
|
eiger and jungfrau servers int to uint32_t for read and write registers
|
2018-03-08 16:46:15 +01:00 |
|
|
|
3878212ffd
|
jungfrau server adcphase not responding to a get properly
|
2018-03-08 15:17:14 +01:00 |
|
|
|
639fdac232
|
created jungfrau virtual server(in next commit), edited install manual to give out html pages without subsection toc, links, navigaion, spilit into as many sections etc for wiki page
|
2018-02-23 12:45:31 +01:00 |
|
|
|
7364f674ed
|
[JUNGFRAU] - Modified memory map address shift for the interface between FPGA and Blackfin SOM. Shift has to be set to 1 since the basic AMC data transfers is 8-bit and not 16-bit.
|
2018-02-22 11:15:24 +01:00 |
|
|
|
aa190fda7a
|
merge from 3.0.1: eiger server detip and mac client updated back
|
2018-02-07 15:24:44 +01:00 |
|
|
|
5198e67dbd
|
made the detector ip and detector mac update client in configuremac
|
2018-02-07 15:16:16 +01:00 |
|
|
|
897cbac27d
|
merge from 3.0.1 for server binaries (adcphase,server dates, temp control, settings file
|
2018-02-07 11:02:36 +01:00 |
|
|
|
618f6291cf
|
server binaries for all, jungfgrauserver with adcphase returning something, serverclient interface fixed for others not using tempcontrol, detectornumber not used for settings file for non eiger/mythen, server dates removing rev number
|
2018-02-07 09:23:52 +01:00 |
|
|
|
3da6a6df65
|
merge conflict removed, jungfrau server and eiger server re compiled
|
2018-02-05 12:33:05 +01:00 |
|
|
|
e6bd874a88
|
modified jungfrau server and client to make auto_comp_disable a not yet implemented feature as it requires a firmware upgrade
|
2018-02-05 11:50:22 +01:00 |
|
|
|
5d04067973
|
added auto comp disable feature
|
2018-02-02 18:01:01 +01:00 |
|
Dhanya Maliakal
|
08fda2b662
|
in between in terms of mythen3 server, done with setdac and set power
|
2018-02-01 17:48:43 +01:00 |
|
Andrä Marie
|
3aeb3f58d1
|
first mythen3Server commit
|
2018-01-22 14:01:46 +01:00 |
|
Dhanya Maliakal
|
061abf7be0
|
jungfrau server: changes to ensure no update of detector during this, included power chip to read the status bit and give error if temp event is up
|
2018-01-11 16:52:08 +01:00 |
|
Dhanya Maliakal
|
2d6e4c95a2
|
temp_threshold, temp_control, temp_event done
|
2018-01-11 15:37:24 +01:00 |
|
Dhanya Maliakal
|
d879379aa4
|
jungfrau server: incorporated transmission delay
|
2018-01-11 11:33:26 +01:00 |
|
Dhanya Maliakal
|
348a426242
|
updating to have developer's debug mode, resetfpga, programfpga and added api versioning, changed software date to only have date
|
2018-01-11 09:14:45 +01:00 |
|
Dhanya Maliakal
|
68d6c514a9
|
jungfrau server has same resetfpga, programfpga and debug mode as developer branch, eiger server has effects from debug flag, but not compiled
|
2018-01-10 15:49:40 +01:00 |
|
Dhanya Maliakal
|
2fca426ec0
|
Merge branch '3.0' into zmqseparate
|
2017-11-16 13:49:11 +01:00 |
|
Dhanya Maliakal
|
d9fcac0236
|
updated merge from 3.0 hotfix setdac
|
2017-11-16 12:32:38 +01:00 |
|
Dhanya Maliakal
|
f192164e32
|
fixed setdac bug that comes rarely, moved serialize spi to 32bit
|
2017-11-16 12:27:58 +01:00 |
|
Dhanya Maliakal
|
7ff23b25b3
|
merge bug fix of set module
|
2017-10-27 16:16:29 +02:00 |
|
Dhanya Maliakal
|
1420921291
|
Merge branch '3.0' into 3.0.1
|
2017-10-27 15:47:15 +02:00 |
|
Dhanya Maliakal
|
92f988ddc1
|
somewhere
|
2017-10-27 14:00:57 +02:00 |
|
Dhanya Maliakal
|
986826cbe9
|
x y z and id are written to the udp header for eiger
|
2017-09-26 16:39:02 +02:00 |
|
Dhanya Maliakal
|
663fd557ff
|
client gives now 3d positions of detector to be configured in udp header, only in jungfrau firmware till now
|
2017-09-22 15:28:57 +02:00 |
|
Dhanya Maliakal
|
862169e178
|
jungfrau with the option to start in debug mode to bypass the checks and tests
|
2017-09-20 16:20:39 +02:00 |
|
Dhanya Maliakal
|
c635b19941
|
fixed jungfrau image after programfpga, fixed resetfpga
|
2017-09-14 15:55:55 +02:00 |
|
Dhanya Maliakal
|
56aa4be358
|
added eiger virtual class. eiger server minor bug fix. 1. copying local trimbits over from module (in effect same thing)2.rate correction table calculated each time and now only when period is different
|
2017-08-30 15:29:58 +02:00 |
|
Dhanya Maliakal
|
ec4be4f2c0
|
bugfix: framesl was not conected, exptime default time is 10 us
|
2017-08-18 16:11:49 +02:00 |
|
Dhanya Maliakal
|
af079f3168
|
posisibility to read adnd write registers in the front end board for eiger
|
2017-08-10 14:49:02 +02:00 |
|
Dhanya Maliakal
|
389f356a3a
|
high voltage reflects the master only, if 2 masters reflects -1
|
2017-08-10 11:09:44 +02:00 |
|
Dhanya Maliakal
|
931a5840e8
|
changes to gotthard server to include write adc, and also changes to fix the dma=dma+1
|
2017-07-11 10:54:21 +02:00 |
|
Dhanya Maliakal
|
a583f3d6e2
|
some more changes to make file for automatic versioning
|
2017-07-10 11:18:41 +02:00 |
|
Dhanya Maliakal
|
00e742e0e0
|
took out also the ADC and serialspi
|
2017-06-14 11:28:16 +02:00 |
|
Dhanya Maliakal
|
a95dbd2215
|
made some functions common
|
2017-06-14 10:43:15 +02:00 |
|
Dhanya Maliakal
|
74ca3fcc9a
|
jungfrau server works
|
2017-06-12 18:27:59 +02:00 |
|
Dhanya Maliakal
|
132a9bbfe9
|
solved many bugs, but cannot get data in eiger
|
2017-06-09 16:02:58 +02:00 |
|
Dhanya Maliakal
|
c755a8974c
|
done, but need to compile
|
2017-06-09 11:42:25 +02:00 |
|
Dhanya Maliakal
|
0254ff0281
|
cleaning up of servers
|
2017-06-02 19:29:34 +02:00 |
|
