26 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandFilip Leonarski	19b135186d	v1.0.0-rc.175 (#85) ... * Rugnux: Processes a collection live while jfjoch_broker writes it (`rugnux <master.h5> <broker URL>`). * Rugnux: Processing starts on the first images and confirms its choices once all are in, so analysis can begin during collection. * Rugnux: Faster processing, especially on servers with several GPUs and CPU sockets and on computers without a GPU (`--no-gpu`, macOS). * Rugnux: Uses much less GPU memory, so large data sets stay on the GPU of smaller cards, and a data set too large for the card is processed on the CPU instead. * Rugnux: On macOS, Bragg integration runs on the Apple GPU. * Rugnux: Better handling of twinning and pseudo-symmetry, with the twin hypothesis written as `<prefix>_twin_<SG>.mtz`, and a wrong `--model` no longer confirms the data or decides the hand. * Rugnux: `--model` accepts predicted (AlphaFold) models and falls back to molecular replacement when the model is not placed as a rigid body (experimental `--mr` forces it), settling space group, hand and twinning and writing a different answer as `<prefix>_mr.mtz`. * Rugnux: Molecular replacement is faster and settles the space group in more cases with several copies in the asymmetric unit. * Rugnux: Deposition-ready mmCIF, a richer report, and numbered steps on the terminal with the full log in `<prefix>_log.txt`; `_P1.mtz`, `--estimate-beam-center` and `--beam-center-search` are removed. * Rugnux: The beam-stop shadow is found correctly on tilted detectors. * Rugnux: Stills files that record a stationary goniometer axis get the default stills geometry refinement. * jfjoch_viewer: "Analyze dataset" uses the same defaults as a bare `rugnux <file>`, and shows the results of processed CBF, marCCD and SMV sweeps. * jfjoch_viewer: The Files panel refreshes on F5 and every few seconds, and the plot type and other selections stay put during live collection. * jfjoch_writer: Memory stays bounded and old data files are closed efficiently on long runs, any failure ends the run in an error state the broker is told about, and the master file appears only after its data files; the ZeroMQ pusher logs when a stalled writer makes it drop images. * Fixes: The TCP image pusher no longer blocks the broker's receiver, GPU out-of-memory failures stop with a clear message, and the XDS plugin masks module and chip edges. --------- Co-authored-by: Filip Leonarski <jungfrau@filips-mac-mini.home> Reviewed-on: #85 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-10-16 15:34:43 +02:00
leonarski_f	680c36c20d	v1.0.0-rc.166 (#76) ... * `rugnux --mode calibration` writes `<prefix>.json` beside the `.poni`, whose `dataset_settings` member is a `jfjoch_broker` `dataset_settings` body as it stands. * `rugnux` and `jfjoch_viewer` read PILATUS miniCBF sweeps natively, without conversion. * Masters written by other facilities open, including Eiger 1.x and third-party NXmx variants. * `rugnux` measures the beam centre on every run, and indexes with it when the file's value indexes nothing. * A detector swung out on a 2theta arm is placed where the file says it stands, and the calibration can hold the tilt fixed. * `rugnux` writes the unmerged MTZ by default, and a P1 merge beside it, so a wrong space group can be re-merged without reprocessing. * Significant improvements to symmetry handling in `rugnux`: the lattice, the point group, the setting and the systematic absences. * The `rugnux` report gives the resolution the CC1/2 fit reached, beside the range the reflections were written to. * The `rugnux` report gives the twinning statistics measured before the space group was decided, beside the ones measured after. * The `rugnux` report gives the strong-direction diffraction limit, and warns when CC1/2 is not monotone with resolution. * `rugnux` ranks screw axes on the evidence their absences carry, rather than on how many control reflections a candidate happens to have. * Twinning is no longer reported when the L-test contradicts it. * The `rugnux` report gives the detector tilt, the measured tilt and the direct beam beside the beam centre, and a post-refined beam centre is judged against the run's own measurement rather than the file's. * `--no-refine-tilt` holds the detector tilt at the value in the file, instead of zeroing it, when the calibration starts from the spots. * The `jfjoch_viewer` grid scan view draws the cells in the proportion of the scan steps, so the map has the shape of the scanned area. Reviewed-on: #76 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-09-02 21:17:31 +02:00
leonarski_fandjungfrau	4dc2534dbf	v1.0.0.rc-162 (#72) ... **Files written by Jungfraujoch now import correctly in DIALS, XDS and pyFAI.** A tilted detector, a grid scan, a still recorded at a goniometer position, and saturated or unreadable pixels were each described in a way that a third-party program acted on wrongly. If you process Jungfraujoch data outside Jungfraujoch, prefer this release to any earlier one. * HDF5: the detector tilt (`rot1`/`rot2`/`rot3`) is exported correctly in the NXmx transformation chain; untilted geometries are unaffected. * HDF5: a still recorded at a goniometer position is no longer read back as a single image, and a grid scan records a stationary spindle so a program that requires a rotation axis can open it. * HDF5: the sample transformation chain is written in mounting order, with a Smargon head position told apart from the spindle, one entry per image, `module_offset` as a float unit vector, and `offset_units` on every offset. * HDF5: saturated, underloaded and unreadable pixels are described so a downstream program masks them - `saturation_value`, `underload_value`, `error_value` and `bit_depth_readout` are written correctly, and a data file missing next to a VDS master reads as the error marker rather than as zero counts. * HDF5: the rotation axis is read back under whatever name it carries, and `mirror_y` records whether the assembled image is mirrored in Y relative to the detector's raw readout. * A grid scan and a goniometer axis can both be set; they are no longer alternatives. * `images_per_file` is chosen from the acquisition when it is not given: a rotation sweep of at most 20000 images goes into a single data file, a grid scan splits on whole fast-axis rows, and stills and serial keep 1000. * The writer refuses a stream whose start message declares a different pixel format than its images carry, and a DECTRIS detector sending signed images is no longer declared unsigned. * The image stream can carry the sample transformation chain (`transformations`, in the END message); a producer that does not send it gets the same chain built by the writer. * rugnux: fixing the space group with `-S` no longer prevents the lattice from being found - a lattice indexed in a different setting is reindexed into that group's own setting, and a run whose crystal does not have that group's lattice stops and names the cell it indexed as, rather than reporting statistics that cannot describe it. * rugnux: the per-image resolution estimate now predicts the resolution the merged data reach rather than the highest-resolution spot found, and is reported as `SPOT_RESOLUTION_ESTIMATE`. * rugnux: two runs of the same command on the same images produce the same merged intensities; the azimuthal profile written alongside them is not yet reproducible in the same way. * rugnux: the offline lattice refinement is bounded by iterations rather than by a wall clock, so a loaded machine can no longer refine to a different lattice; a live acquisition keeps its real-time bound. * rugnux: the detector-frame modulation correction is fitted on a grid spanning the detector, so whether it is applied no longer depends on how far integration reached. * rugnux: the geometry pre-pass no longer writes `<prefix>_01.mtz`, `_01.cif`, `_01.hkl` and `_01_image.dat`; the refined second pass writes those files under `<prefix>`, and that is the result to use. * rugnux: `_process.h5` describes the pixel format of the images it links to, and is written on a thread of its own. * rugnux: the detector geometry is also logged in XDS's convention (`ORGX`/`ORGY`, detector axis vectors, rotation axis), so it can be compared with an XDS refinement. * rugnux: an image integrated in pyFAI through the `.poni` file written by `--mode calibration` comes out with the correct azimuth, and the file declares pyFAI's `orientation`, which needs pyFAI 2024.01 or newer. Radial integration is unchanged. * rugnux: a rotation run is substantially faster throughout - beam-stop detection, first-pass indexing, geometry refinement, integration, scaling and merging - and observations outside the scaling resolution range are dropped as they are ingested. The refined geometry, the space group chosen and the merged statistics are unchanged. * Faster spot finding and indexing, on the broker as well as in rugnux; the spots found and the lattices indexed are unchanged. * A run reserves substantially less GPU memory: nothing is allocated for buffers that are never read, and a worker builds only the engines it uses. * rugnux: with `-N` left at its default the per-image loop of `--mode mx` uses at most 16 workers per GPU, rather than one per hardware thread; an explicit `-N` is obeyed as given. * CUDA 12 builds now contain device code for Volta, so the RHEL 8 packages and the portable Linux `.tgz` run on a V100; the CUDA 13 artefacts (RHEL 9, Ubuntu, Windows) remain Turing and newer. * The build resolves a single Eigen for the whole project, and refuses to configure if Ceres picks up a different one; a build that mixed two Eigen versions was undefined behaviour and crashed at -O2. * Documentation: a security page, and the supported GPU generations and minimum NVIDIA driver version of every released artefact. **Breaking change to OpenAPI** - regenerate the client (`jfjoch-client` 1.0.0-rc.162, `frontend/src/client`): * `dataset_settings.images_per_file` is no longer `default: 1000` and no longer accepts `0`; it is optional, and its minimum is 1. A client sending `0` (previously "one file for the whole run") is now rejected - omit the field instead, which for a rotation sweep gives the same single file. * `file_writer_format` now defaults to `NXmxVDS`, matching the server's own default and the layout recommended for DIALS, XDS and CrystFEL. A generated client that fills in schema defaults and does not set the format explicitly will write VDS masters where it previously wrote legacy ones; set `NXmxLegacy` explicitly to keep them. --------- Co-authored-by: jungfrau <jungfrau@mx-aare-test.psi.ch> Reviewed-on: #72 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-25 08:21:39 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63	2026-06-23 20:29:49 +02:00
leonarski_f	cc3eb8352c	v1.0.0-rc.148 (#58) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_broker: Improve azimuthal integration (add <I^2> calculation) * jfjoch_broker: Fixes around indexing, aiming to handle multi-lattice crystals (work in progress, it is not fully integrated) * jfjoch_writer: Save mean(I), stddev(I), and count(I) for each azimuthal bin Reviewed-on: #58	2026-06-08 08:30:35 +02:00
leonarski_f	75de40f52b	v1.0.0-rc.147 (#57) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_viewer: Add reciprocal space viewer * jfjoch_process: Two pass algorithm that does spot finding/indexing + integration of full dataset * jfjoch_process: Improve logic for rotation indexer, to make execution more deterministic (still work in progress) Reviewed-on: #57 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-06-02 11:49:24 +02:00
leonarski_f	fc68a9baed	v1.0.0-rc.146 (#56) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. jfjoch_process: Generate a dedicated file (_process.h5), which can be used as a replacement for the _master.h5 file for a reanalyzed dataset. jfjoch_process: Improve the performance of scaling and merging, implement on the fly scaling. jfjoch_writer: All final data analysis results are repopulated in the _master.h5 file. jfjoch_scale: Dedicated tool for rescaling/merging existing data. jfjoch_viewer: Fix bugs where pixel labels where displayed on a wrong pixel. WARNING! Scaling and merging are experimental at the moment, and may not provide reasonable results for the time being. Reviewed-on: #56	2026-05-28 18:48:35 +02:00
leonarski_f	caef26873e	v1.0.0-rc.145 (#55) ... This is an UNSTABLE release. The release has significant modifications for HDF5 writing logic - in case of troubles go back to 1.0.0-rc.144. * **Default HDF5 writing mode is with VDS, not soft-links** - this improves DIALS compatibility and makes format more future-proof, NXmx legacy format might be phased-out in the future. * XDS plugin: Improve performance of VDS reading. * jfjoch_writer: Significant improvement on how file systems I/O are handled through a dedicated pass-through VFD. * jfjoch_writer: Clean-up of HDF5 routines to better handle issues. Reviewed-on: #55	2026-05-06 21:50:02 +02:00
leonarski_f	4a852b4d6b	v1.0.0-rc.134 (#43) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Add better locking for detector object - should help, when detector initialization takes too long * jfjoch_writer: Enable writing single, integrated HDF5 file with both data and metadata * XDS plugin: Add generation of Jungfraujoch plugin for XDS * CI: Add tests with XDS and DIALS (`xia2.ssx`) Reviewed-on: #43	2026-04-09 13:30:47 +02:00
leonarski_f	f44c6520a8	v1.0.0-rc.107 (#12) ... This is an UNSTABLE release. * jfjoch_viewer: Minor polishing of new functionality * jfjoch_broker: User NaN for empty azimuthal bins Reviewed-on: #12 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-11-24 07:07:32 +01:00
leonarski_f	5d9d2de4a4	v1.0.0-rc.81	2025-09-21 19:27:51 +02:00
leonarski_f	20cd8dc4ac	v1.0.0-rc.76	2025-09-11 14:37:16 +02:00
leonarski_f	fbaf15aa07	v1.0.0-rc.60	2025-07-05 18:52:42 +02:00
leonarski_f	0d1b388f4d	v1.0.0-rc.50	2025-06-20 09:52:26 +02:00
leonarski_f	53c90ee5d8	v1.0.0-rc.40	2025-05-28 18:49:27 +02:00
leonarski_f	b245967df3	v1.0.0-rc.38	2025-05-12 14:17:24 +02:00
leonarski_f	b0607ab3ca	v1.0.0-rc.34	2025-04-14 11:52:06 +02:00
leonarski_f	ddf4c75645	v1.0.0-rc.31	2025-03-02 13:15:28 +01:00
leonarski_f	28d224afab	version 1.0.0-rc.25	2024-11-22 21:25:20 +01:00
leonarski_f	c6d2b5eedf	File writer and spot finding improvements	2024-04-08 11:18:50 +02:00
leonarski_f	59aacf516d	Updates March 2023	2024-03-14 20:26:03 +01:00
leonarski_f	f5f86d9ab6	Modifications in preparation to MAX IV experiment	2024-01-27 21:23:56 +01:00
leonarski_f	16bbf54f2a	Remove open source license (for now)	2023-09-15 10:47:21 +02:00
leonarski_f	bb4cee9b2d	JFJochReceiver: Save information on crystal lattice and spot indexing status to HDF5 file	2023-05-18 10:46:46 +02:00
leonarski_f	0febe9856f	HDF5DataFile: spot information is written as images are coming	2023-05-17 20:40:55 +02:00
leonarski_f	1757d42182	Initial commit ... Signed-off-by: Filip Leonarski <filip.leonarski@psi.ch>	2023-04-06 11:17:59 +02:00