24 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 4.8	02514bb6b7	Compressor: throw on overflow instead of returning a negative size ... Compress() and FrameTransformation::CompressImage() returned int64_t with a negative value meaning "did not fit". That is a footgun: the negative result silently converts to a huge size_t if a caller forgets to check it. Return size_t and instead throw a named CompressionBufferTooSmallException (deriving from JFJochException, Compression category) when the output would not fit the destination buffer. The receiver catches it explicitly and drops just that frame, as before; the offline/GetCompressedImage path uses a worst-case buffer so it never throws. Add a test that a too-small destination throws and a worst-case buffer does not. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-06-27 08:17:21 +02:00
leonarski_fandClaude Opus 4.8	c332e45a54	Compressor: make Compress size-aware, drop frames that don't fit ... JFJochBitShuffleCompressor::Compress now takes a dest_size and returns a negative value when the compressed output would not fit, instead of writing past the destination buffer. The check is lazy: before each block it verifies the remaining space still covers that block's worst case (mirrored by the new MaxCompressedBlockSize helper, consistent with MaxCompressedSize so a dest sized to MaxCompressedSize never fails). On overflow the dest content is undefined - no rescue. The receiver uses this to compress directly into the writer buffer slot and drop just the oversized frame instead of pre-reserving the full worst-case image size next to the per-image CBOR metadata. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-06-26 20:10:52 +02:00
leonarski_fandClaude Opus 4.8	2398330e52	Drop oversized-metadata frames instead of aborting the collection ... A serial-crystallography run on a detector with a large converted geometry (JF17T16, modules tiled vertically + horizontally) aborted with "Array out of bounds (Not enough memory to save image)". An indexed still on such a detector predicts/integrates close to the kMaxReflections (10000) cap; at ~170 B per serialized Reflection that is ~1.7 MB of per-image CBOR metadata, which overflowed the fixed 1 MB the buffer slot reserved on top of the image. The serialization guard then threw and cancelled the whole run. - Raise the per-image metadata headroom from 1 MB to 4 MB (GetImageBufferLocationSize). The worst case - 10000 reflections + 2000 spots (API max) + 65534 azimuthal bins - serializes to 2.78 MB, leaving margin while staying negligible next to the multi-MB image slot. - When metadata still does not fit, drop just that frame (log metadata/image/slot sizes + recycle the slot) instead of aborting, in both the FPGA and Lite receivers. - Add a regression test asserting the worst-case metadata fits the headroom. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>	2026-06-26 17:11:41 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63	2026-06-23 20:29:49 +02:00
leonarski_f	90e804acd7	v1.0.0-rc.150 (#60) ... * jfjoch_broker: When in FPGA workflow (with PSI detectors) azimuthal integration might be forced to CPU - this will require more computational power, but it enables more integration bins and reports standard deviation of each bin. * jfjoch_broker: Raise error if one is in FPGA flow and there are too many azimuthal integration bins. Reviewed-on: #60	2026-06-15 20:24:15 +02:00
leonarski_f	cc3eb8352c	v1.0.0-rc.148 (#58) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_broker: Improve azimuthal integration (add <I^2> calculation) * jfjoch_broker: Fixes around indexing, aiming to handle multi-lattice crystals (work in progress, it is not fully integrated) * jfjoch_writer: Save mean(I), stddev(I), and count(I) for each azimuthal bin Reviewed-on: #58	2026-06-08 08:30:35 +02:00
leonarski_f	7d34e8a049	v1.0.0-rc.144 (#54) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Improve performance of preview JPEG image generator at receiver startup (saving about 150 ms on measurement start for 16M) Reviewed-on: #54 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-05-01 17:06:36 +02:00
leonarski_f	d760b12a18	v1.0.0-rc.141 (#51) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Azimuthal integration mapping is generated with parallel computations, significantly reducing setup times * frontend: Fix selection of FFTW in indexing settings Reviewed-on: #51 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-30 13:04:54 +02:00
leonarski_f	239a441ee6	v1.0.0-rc.140 (#50) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: For DECTRIS detectors, ZeroMQ link is persistent, to save time for establishing new connection * jfjoch_broker: Minor bug fixes for rare conditions Reviewed-on: #50	2026-04-29 21:40:22 +02:00
leonarski_f	4878318c27	v1.0.0-rc.139 (#49) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Further reduce startup time for DECTRIS detectors by selectively modifying SIMPLON parameters on `/start` * jfjoch_broker: Further reduce startup time for DECTRIS detectors by not setting beam center and detector distance via SIMPLON API on '/start' * jfjoch_broker: Add an extra message to ZeroMQ puller ready to monitor Lite worklow preparation time * jfjoch_broker: Image buffer configuration is postponed for Lite receiver flow till start message is received * jfjoch_broker: Use nanoseconds internally for frame/image/readout time * jfjoch_broker: Extra messages added for receiver operation (to be removed after debugging finished) * jfojch_broker: Improve profiling of different data analysis steps * jfjoch_broker: Record integration reflection count * jfjoch_broker: Fix bug where ZeroMQ preview frequency was confusing time units (micro vs. milliseconds) * jfjoch_broker: Fix bug where '/wait_till_done' got deadlocked * jfjoch_writer: Fix confusion between NaN and zero in floating-point datasets **Breaking changes**: detector definition is now using nanoseconds to define minimum frame time, minimum count time and readout time. Reviewed-on: #49	2026-04-29 09:50:50 +02:00
leonarski_f	c981e1b91c	v1.0.0-rc.137 (#46) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Better track time for each operation in the processing stack * jfjoch_broker: Rewrite preprocessing of diffraction images in the non-FPGA workflow to better use GPUs (work in progress) * jfjoch_broker: Remove ROI calculation in the non-FPGA workflow (work in progress) * jfjoch_viewer: Toolbar displays image number starting from 1 (instead of 0) Reviewed-on: #46	2026-04-25 19:59:21 +02:00
leonarski_f	166fcdb68f	v1.0.0-rc.131 (#39) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Fix bug in saving JUNGFRAU calibration (pedestal/pedestalRMS) * jfjoch_viewer: Fix calibration (pedestal) images being open flipped * jfjoch_process: Add space group detection (EXPERIMENTAL) Reviewed-on: #39	2026-03-07 11:34:04 +01:00
leonarski_f	f3e0a15d26	v1.0.0-rc.127 (#34) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Default EIGER readout time is 20 microseconds * jfjoch_broker: Multiple improvements regarding performance * jfjoch_broker: Image buffer allows to track frames in preparation and sending * jfjoch_broker: Dedicated thread for ZeroMQ transmission to better utilize the image buffer * jfjoch_broker: Experimental implementation of transmission with raw TCP/IP sockets * jfjoch_writer: Fixes regarding properly closing files in long data collections * jfjoch_process: Scale & merge has been significantly improved, but it is not yet integrated into mainstream code Reviewed-on: #34	2026-03-02 15:57:12 +01:00
leonarski_f	06949caf1a	v1.0.0-rc.112 (#18) ... This is an UNSTABLE release and not recommended for production use (please use rc.11 instead). * jfjoch_broker: Experimental rotation (3D) indexing * jfjoch_broker: Minor fix to error in optimizer potentially returning NaN values Reviewed-on: #18 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-11-30 17:39:22 +01:00
leonarski_f	061152279c	v1.0.0-rc.91	2025-10-20 20:43:44 +02:00
leonarski_f	dba807fadd	v1.0.0-rc.71	2025-08-28 07:07:01 +02:00
leonarski_f	51cbef4c84	1.0.0-rc.66	2025-07-18 11:42:39 +02:00
leonarski_f	4da526c51b	v1.0.0-rc.63	2025-07-09 14:55:28 +02:00
leonarski_f	92288c60d7	NeuralNetInferenceClient: Accept PixelMask	2025-06-30 21:29:48 +02:00
leonarski_f	b59a03ff02	v1.0.0-rc.44	2025-06-15 17:46:46 +02:00
leonarski_f	53c90ee5d8	v1.0.0-rc.40	2025-05-28 18:49:27 +02:00
leonarski_f	b245967df3	v1.0.0-rc.38	2025-05-12 14:17:24 +02:00
leonarski_f	29ecd3515a	patch to 1.0.0-rc.36	2025-05-07 16:24:35 +02:00
leonarski_f	040cf08386	v1.0.0-rc.36	2025-05-05 19:32:22 +02:00