**Files written by Jungfraujoch now import correctly in DIALS, XDS and pyFAI.** A tilted detector, a grid scan, a still recorded at a goniometer position, and saturated or unreadable pixels were each described in a way that a third-party program acted on wrongly. If you process Jungfraujoch data outside Jungfraujoch, prefer this release to any earlier one.
* HDF5: the detector tilt (`rot1`/`rot2`/`rot3`) is exported correctly in the NXmx transformation chain; untilted geometries are unaffected.
* HDF5: a still recorded at a goniometer position is no longer read back as a single image, and a grid scan records a stationary spindle so a program that requires a rotation axis can open it.
* HDF5: the sample transformation chain is written in mounting order, with a Smargon head position told apart from the spindle, one entry per image, `module_offset` as a float unit vector, and `offset_units` on every offset.
* HDF5: saturated, underloaded and unreadable pixels are described so a downstream program masks them - `saturation_value`, `underload_value`, `error_value` and `bit_depth_readout` are written correctly, and a data file missing next to a VDS master reads as the error marker rather than as zero counts.
* HDF5: the rotation axis is read back under whatever name it carries, and `mirror_y` records whether the assembled image is mirrored in Y relative to the detector's raw readout.
* A grid scan and a goniometer axis can both be set; they are no longer alternatives.
* `images_per_file` is chosen from the acquisition when it is not given: a rotation sweep of at most 20000 images goes into a single data file, a grid scan splits on whole fast-axis rows, and stills and serial keep 1000.
* The writer refuses a stream whose start message declares a different pixel format than its images carry, and a DECTRIS detector sending signed images is no longer declared unsigned.
* The image stream can carry the sample transformation chain (`transformations`, in the END message); a producer that does not send it gets the same chain built by the writer.
* rugnux: fixing the space group with `-S` no longer prevents the lattice from being found - a lattice indexed in a different setting is reindexed into that group's own setting, and a run whose crystal does not have that group's lattice stops and names the cell it indexed as, rather than reporting statistics that cannot describe it.
* rugnux: the per-image resolution estimate now predicts the resolution the merged data reach rather than the highest-resolution spot found, and is reported as `SPOT_RESOLUTION_ESTIMATE`.
* rugnux: two runs of the same command on the same images produce the same merged intensities; the azimuthal profile written alongside them is not yet reproducible in the same way.
* rugnux: the offline lattice refinement is bounded by iterations rather than by a wall clock, so a loaded machine can no longer refine to a different lattice; a live acquisition keeps its real-time bound.
* rugnux: the detector-frame modulation correction is fitted on a grid spanning the detector, so whether it is applied no longer depends on how far integration reached.
* rugnux: the geometry pre-pass no longer writes `<prefix>_01.mtz`, `_01.cif`, `_01.hkl` and `_01_image.dat`; the refined second pass writes those files under `<prefix>`, and that is the result to use.
* rugnux: `_process.h5` describes the pixel format of the images it links to, and is written on a thread of its own.
* rugnux: the detector geometry is also logged in XDS's convention (`ORGX`/`ORGY`, detector axis vectors, rotation axis), so it can be compared with an XDS refinement.
* rugnux: an image integrated in pyFAI through the `.poni` file written by `--mode calibration` comes out with the correct azimuth, and the file declares pyFAI's `orientation`, which needs pyFAI 2024.01 or newer. Radial integration is unchanged.
* rugnux: a rotation run is substantially faster throughout - beam-stop detection, first-pass indexing, geometry refinement, integration, scaling and merging - and observations outside the scaling resolution range are dropped as they are ingested. The refined geometry, the space group chosen and the merged statistics are unchanged.
* Faster spot finding and indexing, on the broker as well as in rugnux; the spots found and the lattices indexed are unchanged.
* A run reserves substantially less GPU memory: nothing is allocated for buffers that are never read, and a worker builds only the engines it uses.
* rugnux: with `-N` left at its default the per-image loop of `--mode mx` uses at most 16 workers per GPU, rather than one per hardware thread; an explicit `-N` is obeyed as given.
* CUDA 12 builds now contain device code for Volta, so the RHEL 8 packages and the portable Linux `.tgz` run on a V100; the CUDA 13 artefacts (RHEL 9, Ubuntu, Windows) remain Turing and newer.
* The build resolves a single Eigen for the whole project, and refuses to configure if Ceres picks up a different one; a build that mixed two Eigen versions was undefined behaviour and crashed at -O2.
* Documentation: a security page, and the supported GPU generations and minimum NVIDIA driver version of every released artefact.
**Breaking change to OpenAPI** - regenerate the client (`jfjoch-client` 1.0.0-rc.162, `frontend/src/client`):
* `dataset_settings.images_per_file` is no longer `default: 1000` and no longer accepts `0`; it is optional, and its minimum is 1. A client sending `0` (previously "one file for the whole run") is now rejected - omit the field instead, which for a rotation sweep gives the same single file.
* `file_writer_format` now defaults to `NXmxVDS`, matching the server's own default and the layout recommended for DIALS, XDS and CrystFEL. A generated client that fills in schema defaults and does not set the format explicitly will write VDS masters where it previously wrote legacy ones; set `NXmxLegacy` explicitly to keep them.
---------
Co-authored-by: jungfrau <jungfrau@mx-aare-test.psi.ch>
Reviewed-on: #72
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use.
* rugnux: Rebrand the offline data-processing subsystem as `rugnux` and consolidate all offline analysis into the single `rugnux` binary - `jfjoch_process` is now `rugnux`, the former `jfjoch_azint` is now `rugnux --azint-only`, and `jfjoch_scale` is now `rugnux --scale` (see the new docs/NAMING.md and docs/RUGNUX.md). Scaling and merging are on by default for rotation and stills (`--no-merge` disables them), replacing the previous opt-in `-M, --scale-merge`.
* rugnux: CLI fixes - default `-N` to all hardware threads, parse numeric option arguments strictly (reject non-numeric or trailing input instead of silently yielding 0), require `--wavelength > 0`, and correct the reproduced command line and `--scale` reference-cell handling.
* rugnux: De-novo space-group improvements - recover genuine high symmetry and centred Bravais lattices from intensities, add an automatic CC1/2 high-resolution cutoff, and report L-test twinning statistics.
* rugnux: Index weakly-diffracting low-resolution rotation data that previously failed (e.g. F-cubic crystals that diffract only to ~4 A on a detector reaching ~1.5 A). The per-frame indexing gate now measures the indexed fraction only within the resolution range the lattice actually diffracts to, so the many sub-diffraction ice/noise spots no longer make the fraction floor unreachable; the two-pass first pass tries several image-sampling schemes (spread across the whole rotation vs a consecutive wedge whose native stride keeps a reflection's rocking curve continuous, letting the FFT resolve a long axis) and keeps the one that indexes the most frames; and the de-novo space-group search no longer discards all reflections (and crashes) when every resolution shell falls below <I/sigma> = 1.
* rugnux: Lower the low-resolution R-meas for strongly-diffracting rotation data - drop edge-of-sweep truncated fulls whose rocking curve was captured below `--min-captured-fraction` (default 0.7 for rotation), and report R-meas only over the observations kept by outlier rejection (matching XDS). The 0.7 default also strips the partiality-extrapolated fulls that dominate the intensity second moment on weakly-diffracting crystals, so the de-novo space-group search is no longer starved by the error-model I/sigma floor and recovers the correct symmetry (e.g. the F-cubic Benas crystals: Benas_3 -> F432, Benas_7 -> P6122, instead of P4/P1); on the reference battery every other crystal keeps its space group.
* rugnux: Write the refined geometry (beam, tilt, axis) to _process.h5 and place non-standard mmCIF items under a reserved `jfjoch` prefix.
* jfjoch_broker: Ordinary acquisition failures (receiver/writer/analysis problems, missed packets, writer disconnect) now return to the Idle state with an Error-severity message, so a run can be retried without an expensive re-initialisation; only failures that leave the detector in an undefined state (new JFJochCriticalException, e.g. PCIe/FPGA faults) go to the Error state and force re-initialisation.
* jfjoch_broker: A synchronous /start now reports its failure to the HTTP caller instead of returning HTTP 200, and an incomplete or truncated dataset (missing packets, writer disconnect) is reported as an error rather than a "reduce frame rate" warning.
* jfjoch_broker: Drop uncollected placeholder rows (number = -1) from the scan_result REST endpoint.
* jfjoch_broker: Fix the inverted per-image compression ratio reported by the Lite receiver (was compressed/uncompressed instead of uncompressed/compressed).
* jfjoch_broker: Bragg integration adds a quantization-noise variance floor with a box-sum fallback, and treats the type-maximum marker as an invalid pixel for unsigned image types.
* jfjoch_writer: Detect file-overwrite conflicts at start for back-channel transports, and reset the writer when end-of-collection finalisation fails.
* jfjoch_viewer: Preview overlays follow the geometry (resolution/ROI arcs, true beam centre, predictions, coral secondary-lattice spots, legend), add save-as-JPEG, and fix an HTTP live-follow memory leak.
* Frontend: Improved aesthetics and usability, and added in-browser pixel-mask and JUNGFRAU-pedestal visualisation.
* CI: Name the Windows installer jfjoch-viewer-* instead of jfjoch-*.Reviewed-on: #67
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use.
* jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing
* jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files
* jfjoch_broker: Add ROI calculation in non-FPGA workflow
* jfjoch_broker: Fixes to TCP image pusher
* jfjoch_broker: Remove NUMA bindings
* jfjoch_broker: Improvements to indexing
* jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values
* jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors
* jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs
* jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results
Reviewed-on: #63
* jfjoch_broker: For PSI EIGER detector allow to disable individual half-modules by putting empty hostname
Reviewed-on: #61
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144.
* jfjoch_broker: Improve azimuthal integration (add <I^2> calculation)
* jfjoch_broker: Fixes around indexing, aiming to handle multi-lattice crystals (work in progress, it is not fully integrated)
* jfjoch_writer: Save mean(I), stddev(I), and count(I) for each azimuthal bin
Reviewed-on: #58
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* jfjoch_broker: Azimuthal integration mapping is generated with parallel computations, significantly reducing setup times
* frontend: Fix selection of FFTW in indexing settings
Reviewed-on: #51
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* jfjoch_broker: For DECTRIS detectors, ZeroMQ link is persistent, to save time for establishing new connection
* jfjoch_broker: Minor bug fixes for rare conditions
Reviewed-on: #50
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* jfjoch_broker: Further reduce startup time for DECTRIS detectors by selectively modifying SIMPLON parameters on `/start`
* jfjoch_broker: Further reduce startup time for DECTRIS detectors by not setting beam center and detector distance via SIMPLON API on '/start'
* jfjoch_broker: Add an extra message to ZeroMQ puller ready to monitor Lite worklow preparation time
* jfjoch_broker: Image buffer configuration is postponed for Lite receiver flow till start message is received
* jfjoch_broker: Use nanoseconds internally for frame/image/readout time
* jfjoch_broker: Extra messages added for receiver operation (to be removed after debugging finished)
* jfojch_broker: Improve profiling of different data analysis steps
* jfjoch_broker: Record integration reflection count
* jfjoch_broker: Fix bug where ZeroMQ preview frequency was confusing time units (micro vs. milliseconds)
* jfjoch_broker: Fix bug where '/wait_till_done' got deadlocked
* jfjoch_writer: Fix confusion between NaN and zero in floating-point datasets
**Breaking changes**: detector definition is now using nanoseconds to define minimum frame time, minimum count time and readout time.
Reviewed-on: #49
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
jfjoch_broker: Cleanup DECTRIS start-up code to enable a shorter start time
jfjoch_broker: Allow for asynchronous start to allow overlapping detector configuration with other beamline preparations
jfjoch_broker: Goniometer axis name is converted to lowercase
jfjoch_broker: Fix bug, where wrong HTTP error codes were returned
jfjoch_broker: Improve sigma estimation during merging (K. Takaba)
---------
Co-authored-by: takaba_k <kiyofumi.takaba@psi.ch>
Reviewed-on: #48
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132.
* jfjoch_broker: Use httplib for HTTP server instead of Pistache
* jfjoch_broker: Drop OpenSSL support
* jfjoch_broker: Base work for multi-lattice support in the future
* Update dependencies to more recent versions (spdlog, HDF5, Catch2, httplib)
Reviewed-on: #41
This is an UNSTABLE release.
* jfjoch_viewer: Add keyboard shortcuts and option to copy image to clipboard
* jfjoch_broker: Fix bit-width and exposure time for PSI EIGER detectors
Reviewed-on: #15
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
This is an UNSTABLE release and not recommended for production use (please use rc.96 instead).
* jfjoch_broker: For DECTRIS detectors add dark data collection during initialization for bad pixel mask
* jfjoch_broker: Refactor of calibration logic for more clear code (likely to introduce problems)
* jfjoch_viewer: Add option to handle user pixel mask (experimental)
* jfjoch_viewer: More options for ROI
* jfjoch_viewer: Add window to display calibration
Reviewed-on: #2
Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>
Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>
leonarski_fandjungfrau
