63 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5	df9a9c2a2c	Fix the defects found reviewing the branch before merge ... Image buffer: the per-image CBOR metadata headroom had been re-derived from the online reflection cap alone, which cut it from 4 MiB to 2.55 MB while the measured worst case - reflections plus the capped spot list plus the three azimuthal arrays - is 2.9 MB, so the receiver dropped the frames with the most to say. Restore it and give it a name that both the code and its guard test read: written down twice, the two had drifted and the test kept passing against the value the code had left. Spot finding: an unset low_resolution_limit means no limit at that end, as an unset high_resolution_limit already did. An optional rather than a zero sentinel, because zero is not a natural "no limit" here - every pixel lies above it, so the plain comparison masked the whole image instead of none of it, and nothing validated the zero. The API field is no longer required; a zero is folded into the unset case at the boundary, where older clients still send it, so one spelling reaches the analysis code. The FPGA takes its fixed-point ceiling instead, since ap_ufixed<16,9> wraps above 512 A and would have masked everything. image_preprocessing: check the CUDA calls on the fused decode path - the one new GPU file with none, and the path fed by bytes we did not produce. An unchecked synchronise returned the host-written sentinel as if it were a measurement, so the decode looked successful and the fallback to the host decoder never fired. rugnux: --stride no longer writes one past the end of the per-image arrays, whose count floored where the worker loop ceils, and the written process file links the images actually processed rather than the first N - each frame's picture now sits next to its own analysis. Powder calibration: the face-centred calibrants no longer list their systematically absent rings, so the distance fit starts from a reflection that exists rather than an extinct one; the triclinic calibrant covers both signs of h and k instead of a single octant, which is only valid for a diagonal metric. The test asserted the old behaviour - one ring formula for every cubic standard - and is rewritten. CBOR: skip an unknown tagged value in the end block, as the other four blocks already do. One advance lands on the tagged item rather than past it, so an older reader fed a newer end message threw and never finalized its file. Viewer: a settings value the setter rejects no longer escapes as an uncaught throw from a worker slot, and the field offers only what the setter accepts. Space-group search: judge stage B on the same "present" cut stage A already computes. Merged sigma is floored so no reflection reads above ISa, so on a low-ISa merge the fixed cut left both stage B tests unsatisfiable - every screw axis passed unchallenged and the centering rescue switched itself off on exactly the weak data it exists for. Where the fixed cut is the smaller of the two they are equal and this is inert: over the 37-crystal rotation battery every crystal reports the identical space group and identical merge statistics, so it is a no-op there and the low-ISa case it targets remains unmeasured. rugnux: --polarization reaches --mode azint, which parsed the flag and then dropped it; that mode also applies the same polarization default as every other mode. Acknowledge the ACTS/traccc project, whose sparse connected-component labelling both spot extractors take their algorithm from, with its citation and its license. The rc.161 change list is brought back to one line per entry, and the user-visible changes that were missing from it added. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-08 18:18:46 +02:00
leonarski_fandClaude Opus 5	90ab67f376	broker: expose adaptive spot finding over the API ... The self-calibrating detection threshold was reachable from rugnux and the viewer but not online: spot_finding_settings carried no adaptive_threshold, so the receiver always ran the fixed-threshold finder and the fused GPU engine sat unused behind it. adaptive_threshold and false_pixels_per_frame are now part of the schema, both optional so an existing client that sends neither is unaffected, wired through OpenAPIConvert in both directions and surfaced in the frontend panel, where turning the mode on greys out the count threshold it replaces and reveals the operating point it uses instead. The C++ server model and the TypeScript client are regenerated from the spec; the Python client is generated but not tracked. Enabling it is REFUSED where spots are found on the FPGA - the JUNGFRAU and EIGER workflows - rather than accepted and ignored, because a detection setting that silently had no effect cannot be told apart from one that did. The DECTRIS/SIMPLON workflow, which analyses images in software, accepts it. Verified against a running broker: adaptive_threshold true is rejected with that message and leaves the stored settings untouched, while false and omitted both succeed. It stays off by default online, unlike rugnux and the viewer. The broker serves both workflows and the default has to be the one that works on either. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-02 20:01:34 +02:00
leonarski_fandClaude Opus 5	b0e315e73c	Bragg prediction: derive the lattice walk from the cell, and expose it in the API ... Follow-up to making max_hkl a setting: it is now an optional, and unset means "take it from this crystal". The predictor keeps only |q| <= 1/d_min and h = a.q for the real-space axis a, so |h| <= a/d_min exactly - and likewise |k| <= b/d_min and |l| <= c/d_min. max(a,b,c)/d_min therefore bounds all three at once: nothing that could be predicted lies outside it, and nothing inside it is reached by a shorter axis. It applies to rotation and stills alike, both going through the one place the prediction settings are built. Offline (rugnux, viewer) the default is unset, so every crystal gets its own range; --max-hkl overrides it. Online the broker holds a concrete number, because the cost is the cube of it per image and a live acquisition should not have its frame rate decided by whichever sample is mounted: max_hkl joins bragg_integration_settings in the OpenAPI with a default of 100, so an omitted field arrives as that default (the generated model carries it) rather than as "derive it", and the frontend exposes it next to the integration model. Measured against a fixed 100 on six rotation crystals: three are bit-identical, two were being truncated and recover 419k and 5.8k observations with the high-shell CC1/2 going 15.1 -> 25.8% and 52.1 -> 55.3%, and the space group is unchanged 6/6. It reproduces a fixed 200 exactly, which is the bound being tight rather than merely safe. The sixth is worth recording: a 149/83/226 A cell derives 227, and because a single scalar has to cover the longest axis the cube is ~16x what a per-axis box would be - 22% wall clock, for a net 22 observations out of 364k (the per-frame 65536-reflection cap re-selects at the margin when more candidates are offered) and identical CC1/2, ISa and space group. Per-axis limits would remove that; the predictors already map a thread index to h, k and l separately. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-31 13:10:58 +02:00
leonarski_fandClaude Opus 5	16bf3408f0	Address code-review findings; make detection limits detector-driven ... One changeset, developed together in response to a review of this branch, so the files carry several of the changes at once. Full test suite passes (733 cases). Spot finding - Split ImageSpotFinder into Detect() (flag strong pixels - the expensive per-pixel pass) and ExtractSpots() (CCL + min/max-pix + resolution mask), with Run() = both. The per-image min-pix escalation now detects ONCE and repeats only the cheap extraction, instead of re-running the whole finder four times per frame as it did on the default path. It also keeps the winning attempt's spot list rather than re-extracting it, so the frame that is integrated is exactly the frame that was scored - which a GPU re-extract could not guarantee (float atomic ordering). - spot_finding_time_s no longer swallows indexing time, and indexing_time_s now sums every escalation call instead of reporting only the last. Detection limits follow the detector - The azimuthal-integration upper q and the spot-finding high-resolution limit are now std::optional, in the C++ structs AND in the OpenAPI schema, and resolve to the detector's own maximum (DiffractionExperiment::GetDetectorMaxQ_ recipA). Adaptive detection reads a pixel's ring from the azimuthal bins, so a pixel outside that q range could never be strong - the integration range silently bounded what detection could see, regardless of the requested resolution limit. Regenerated the C++ and TypeScript clients; the viewer and the web frontend each gained a "to detector edge" switch. Detection defaults are now per workflow (measured, not assumed) - Stills: adaptive detection, min-pix chosen per image, no resolution clipping. - Rotation: fixed-threshold finder, min-pix 2, 1.5 A limit. On a 33-crystal rotation battery, adaptive detection helped four hard crystals but deterministically broke three (a lost space group, a halved indexing rate, a collapsed merge), and the detector-edge limit cost indexing on a strong rotation set (100.0 -> 96.8%). Each is still overridable by its flag, and --no-adaptive-spots is new. Indexer seed escalation - Stop escalating once a seed's lattice explains >= 90% of the seed spots. Previously any frame with >= 80 spots always paid three indexer calls, online broker included. Merge-consistency filter - --min-image-cc gated on a per-image CC computed BEFORE the stills partiality post-refinement and never refreshed; the refiner now recomputes it, so the reported CC describes the data that are actually merged. - Replaced the per-call cc_mask argument with one MergeOnTheFly flag, so the merge, the error model and MergeStats can no longer disagree about which images are in (the --scale path merged unfiltered while its statistics were filtered). Per-image B-factor refinement (-B) removed - Measured on four serial-stills datasets: it is a no-op where the per-image fit is well conditioned and actively harmful where it is not (CC1/2 -8.1, R_meas +23.2 on the weakest large-cell set, whose fits hit their [-50, 200] bounds on 14-25% of images). It had also been silently DISCARDED since the partiality post-refinement landed - reported but not applied. Rather than fix and keep a knob with no demonstrated benefit, the flag and the whole image_scale_b_factor chain are gone: setting, scaling fit, message field, CBOR, HDF5 write and read-back, per-image plot, OpenAPI enum, viewer column and checkbox, docs. ScaleOnTheFly no longer needs Ceres at all - the fit is a linear IRLS. (The Wilson per-image b_factor is a different quantity and stays.) Stills partiality width now fits both of its components - sigma^2 = gamma0^2 + (gamma_e*d*)^2 instead of a purely angular gamma_e*d* with gamma0 pinned to 0. Fitted per crystal by least squares of dist_ewald^2 on d*^2. The angular-only width is fitted over a d*^2-dense population, so it was pinned by the high-resolution edge and collapsed at low d*: median partiality 0.008 beyond 13 A for reflections that were plainly recorded, 55% of them under the merge's partiality floor, and the survivors divided by those values - which inflated the merged low-resolution intensity scale 3.6x (~ +9 A^2 of apparent B). Measured on 5000 stills: the ramp flattens to 0.89x, no observation is dropped any more (701750 -> 716811), shell-mean CC1/2 and R-free improve slightly. Note CC1/2, R_meas, completeness and a B-refining R-free are all blind to that ramp, which is why it survived earlier validation; the cost is high-resolution R_meas (98.5 -> 101.9 shell-averaged). Removed dead code from add-then-remove churn - Prediction-time "still partiality" (unreachable: no setter), the phantom IndexingSettings::min_indexed_spot_fraction knob (getter, no setter - now the constant it always was), StillsPartialityRefine's caller-less Settings constructor and its reference to a long-gone env var, ProcessImage's unread bool return, an unused include, and a dead viewer overlay hook. Also - Viewer: the magnifier compared a QImage with itself, so its scene rect was set once ever and it could not pan into a larger dataset; the hover tail timer could fire after leaveEvent and resurrect the resolution readout outside the image. - update_version.sh regenerated the frontend lock file BEFORE bumping the version (every release shipped an off-by-one lock), and did git rm/git add on a path that has not existed since the client moved to src/client - with no set -e, both failed silently. - fpga/pcie_driver/postinstall.sh tested "[ ! occurrences > 0 ]", which is a redirect, not a test, so dkms add never ran. - Unit tests for the adaptive-threshold host functions, which had none. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 09:07:00 +02:00
leonarski_fandClaude Opus 4.8	a8c1006c49	Choose min-pix-per-spot adaptively per image for serial-stills indexing ... For stills indexing the minimum-pixels-per-spot filter is now chosen per image instead of being fixed: the frame is indexed at min-pix 3/2/1 and the setting that maximises indexed-spot count weighted by indexed fraction (n_indexed^2 / n_total) is kept, then integrated once at that min-pix. The fraction factor keeps a smaller min-pix's extra spots only when the lattice actually explains them, so strong frames retain their real weak spots (extending resolution) while noise-flooded frames stay strict. The mode is selected by the presence of --min-pix-per-spot, now optional (SpotFindingSettings::min_pix_per_spot is std::optional<int64_t>): omit it for the adaptive per-image path, give a value to force a fixed min-pix. It applies only to the stills indexing path -- rotation indexing builds one global lattice and keeps a fixed min-pix, and the online receiver and the FPGA host path always carry a concrete value, so neither changes. IndexAndRefine::ProcessImage now returns whether the frame indexed, to drive the per-image selection. Exposed in the jfjoch_viewer spot-finding settings (adaptive-threshold and adaptive-min-pix checkboxes, each greying out the control it overrides); the broker uses neither. Validated on the full rotation regression battery (no regression) and the whole serial-stills target battery at full image count. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 18:31:35 +02:00
leonarski_f	67dca388bd	v1.0.0-rc.160 (#70) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * rugnux: Add `--model model.pdb` - score the merged data against an atomic model and compute initial maps. It reports R-work/R-free (scaling the model to the observed amplitudes with an overall scale, an anisotropic B and a flat bulk solvent - the standard few-parameter model, so a batch of maps stays directly comparable) and writes 2Fo-Fc / Fo-Fc electron-density maps (CCP4) plus a map-coefficient MTZ. The structure itself is not refined; the model is only re-fractionalised into the data cell. * rugnux: The merged reflection output now carries French-Wilson amplitudes (|F| and its sigma) next to the intensities - MTZ `F`/`SIGF`, mmCIF `_refln.F_meas_au`, and the text HKL - computed with the correct centric/acentric Wilson prior and epsilon multiplicity, so a downstream program (e.g. phenix.refine) can refine against amplitudes. The intensity columns are unchanged. * rugnux: R-free test-set flags are now assigned deterministically and consistently across symmetry - a Bijvoet pair I(+)/I(-) is never split between the work and free sets, and the assignment is a reproducible per-hkl hash that depends only on the reflection index, so every dataset of one crystal form gets the same ~5% free set (what a multi-dataset campaign such as PanDDA needs). On small data the fraction is floored so the test set stays large enough for a stable R-free (~500 reflections, capped at 10%); it stays flat at 5% on ordinary data. When a reference MTZ carries a `FreeR_flag` column its test set is imported instead, letting a whole campaign inherit one shared free set. * rugnux: A reference MTZ (`--reference-mtz`) can now fix the space group and cell for rotation data too (previously rejected), without being used to scale - the rotation merge stays self-consistent. When the crystal has an indexing (merohedral) ambiguity - a lattice symmetry higher than its Laue symmetry, e.g. P3/P4/P6/C2 - the reference also resolves it: each candidate reindexing (identity plus the twin-law cosets of the metric symmetry) is scored by its intensity correlation against the reference and the data are re-merged in the best-correlating one. This is a metric-preserving relabelling of hkl (the cell is unchanged) and a no-op for a holohedral crystal such as lysozyme. * rugnux: `--model` validation now aligns the data to the model before scoring - the observed reflections are reindexed into the model's enantiomorph when the two differ only by hand (indistinguishable from merged intensities). A merohedral indexing ambiguity is resolved against the reference MTZ when one is given (so a whole campaign shares one indexing convention); only with a model and no reference does validation fall back to fitting each candidate reindexing and keeping the lowest R-free. * rugnux: De-novo symmetry - recover a genuine high-symmetry group whose data are imperfectly scaled. Such a merge's within-orbit chi² lands just past the self-consistency bound (each real symmetry step adds a little systematic scatter), right where a merohedral twin also lands, so the chi² ratio alone cannot separate them. The candidate is now rescued when the extra intensity-proportional systematic error it invokes stays small relative to the confirmed subgroup - a genuine symmetry step gains multiplicity without inflating the merge error model's b, whereas a twin forces non-equivalent reflections together and b balloons. Fixes cubic insulin (I23 instead of I222) with no change to any other crystal in the test battery, including the twins that must stay in their lower symmetry. * Docs: Document the French-Wilson amplitude estimation, R-free flagging, reference-based space-group/ambiguity resolution, and model-based validation/maps in CPU_DATA_ANALYSIS.md. * Frontend: The status-bar pill now shows a progress bar during detector calibration (previously only during measurement), and the calibration state and its button are labelled "Calibration"/"CALIBRATE" (the internal `Pedestal` state name is unchanged for back-compatibility).Reviewed-on: #70 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-19 09:39:28 +02:00
leonarski_f	d6389e12da	v1.0.0-rc.156 (#66) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_process: Major rotation (rot3d) data processing overhaul - robust profile-fit integration, Cauchy-loss scaling with optional absorption surface, de-novo indexing and space-group/centering determination fixes, and merging statistics + ISa in the mmCIF output. * jfjoch_process: Add EXPERIMENTAL ice-ring detection (--detect-ice-rings) that excludes ice reflections from scaling. * Compression: Add BSHUF_ZSTD_RLE_HUFF, make compression size-aware (drop frames that don't fit rather than aborting), and add the jfjoch_recompress tool. * jfjoch_viewer: Report "Multiple lattices detected" and grey out "Analyze dataset" on a live connection. * jfjoch_broker: Write smargon chi/phi goniometer positions to NXmx; read sensor thickness/material from HDF5 metadata. * CI: Build Windows (CUDA and non-CUDA) installers.Reviewed-on: #66 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-03 19:18:56 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63	2026-06-23 20:29:49 +02:00
leonarski_f	90e804acd7	v1.0.0-rc.150 (#60) ... * jfjoch_broker: When in FPGA workflow (with PSI detectors) azimuthal integration might be forced to CPU - this will require more computational power, but it enables more integration bins and reports standard deviation of each bin. * jfjoch_broker: Raise error if one is in FPGA flow and there are too many azimuthal integration bins. Reviewed-on: #60	2026-06-15 20:24:15 +02:00
leonarski_f	cc3eb8352c	v1.0.0-rc.148 (#58) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_broker: Improve azimuthal integration (add <I^2> calculation) * jfjoch_broker: Fixes around indexing, aiming to handle multi-lattice crystals (work in progress, it is not fully integrated) * jfjoch_writer: Save mean(I), stddev(I), and count(I) for each azimuthal bin Reviewed-on: #58	2026-06-08 08:30:35 +02:00
leonarski_f	fc68a9baed	v1.0.0-rc.146 (#56) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. jfjoch_process: Generate a dedicated file (_process.h5), which can be used as a replacement for the _master.h5 file for a reanalyzed dataset. jfjoch_process: Improve the performance of scaling and merging, implement on the fly scaling. jfjoch_writer: All final data analysis results are repopulated in the _master.h5 file. jfjoch_scale: Dedicated tool for rescaling/merging existing data. jfjoch_viewer: Fix bugs where pixel labels where displayed on a wrong pixel. WARNING! Scaling and merging are experimental at the moment, and may not provide reasonable results for the time being. Reviewed-on: #56	2026-05-28 18:48:35 +02:00
leonarski_f	4878318c27	v1.0.0-rc.139 (#49) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Further reduce startup time for DECTRIS detectors by selectively modifying SIMPLON parameters on `/start` * jfjoch_broker: Further reduce startup time for DECTRIS detectors by not setting beam center and detector distance via SIMPLON API on '/start' * jfjoch_broker: Add an extra message to ZeroMQ puller ready to monitor Lite worklow preparation time * jfjoch_broker: Image buffer configuration is postponed for Lite receiver flow till start message is received * jfjoch_broker: Use nanoseconds internally for frame/image/readout time * jfjoch_broker: Extra messages added for receiver operation (to be removed after debugging finished) * jfojch_broker: Improve profiling of different data analysis steps * jfjoch_broker: Record integration reflection count * jfjoch_broker: Fix bug where ZeroMQ preview frequency was confusing time units (micro vs. milliseconds) * jfjoch_broker: Fix bug where '/wait_till_done' got deadlocked * jfjoch_writer: Fix confusion between NaN and zero in floating-point datasets **Breaking changes**: detector definition is now using nanoseconds to define minimum frame time, minimum count time and readout time. Reviewed-on: #49	2026-04-29 09:50:50 +02:00
leonarski_f	c1c170112c	v1.0.0-rc.136 (#45) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Improve logic regarding indexing architecture and thread pools (work in progress). Reviewed-on: #45	2026-04-20 11:54:33 +02:00
leonarski_f	bb9f5c715f	v1.0.0-rc.135 (#44) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * Multiple small bug fixes scattered across the whole code base. (detected with GPT-5.4) * jfjoch_viewer: Improve image render performance Reviewed-on: #44 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-16 11:59:59 +02:00
leonarski_f	4a852b4d6b	v1.0.0-rc.134 (#43) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Add better locking for detector object - should help, when detector initialization takes too long * jfjoch_writer: Enable writing single, integrated HDF5 file with both data and metadata * XDS plugin: Add generation of Jungfraujoch plugin for XDS * CI: Add tests with XDS and DIALS (`xia2.ssx`) Reviewed-on: #43	2026-04-09 13:30:47 +02:00
leonarski_f	6133da1377	v1.0.0-rc.133 ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Use httplib for HTTP server instead of Pistache * jfjoch_broker: Drop OpenSSL support * jfjoch_broker: Base work for multi-lattice support in the future * Update dependencies to more recent versions (spdlog, HDF5, Catch2, httplib) Reviewed-on: #41	2026-03-26 20:50:33 +01:00
leonarski_f	64002f1e29	v1.0.0-rc.129 (#36) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Significant improvements in TCP image socket, as a viable alternative for ZeroMQ sockets (only a single port on broker side, dynamically change number of writers, acknowledgments for written files) * jfjoch_broker: Delta phi is calculated also for still data in Bragg prediction * jfjoch_broker: Image pusher statistics are accessible via the REST interface * jfjoch_writer: Supports TCP image socket and for these auto-forking option Reviewed-on: #36 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-03-05 22:13:12 +01:00
leonarski_f	f3e0a15d26	v1.0.0-rc.127 (#34) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Default EIGER readout time is 20 microseconds * jfjoch_broker: Multiple improvements regarding performance * jfjoch_broker: Image buffer allows to track frames in preparation and sending * jfjoch_broker: Dedicated thread for ZeroMQ transmission to better utilize the image buffer * jfjoch_broker: Experimental implementation of transmission with raw TCP/IP sockets * jfjoch_writer: Fixes regarding properly closing files in long data collections * jfjoch_process: Scale & merge has been significantly improved, but it is not yet integrated into mainstream code Reviewed-on: #34	2026-03-02 15:57:12 +01:00
leonarski_f	07fe4dd3bb	v1.0.0-rc.124 (#31) ... This is an UNSTABLE release. This version significantly rewrites code to predict reflection position and integrate them, especially in case of rotation crystallography. If things go wrong with analysis, it is better to revert to 1.0.0-rc.123. * jfjoch_broker: Improve refection position prediction and Bragg integration code. * jfjoch_broker: Align with XDS way of calculating Lorentz correction and general notation. * jfjoch_writer: Fix saving mosaicity properly in HDF5 file. * jfjoch_viewer: Introduce high-dynamic range mode for images * jfjoch_viewer: Ctrl+mouse wheel has exponential change in foreground (+/-15%) * jfjoch_viewer: Zoom-in numbers have better readability Reviewed-on: #31 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-02-01 13:29:33 +01:00
leonarski_f	1c4dfd03e2	v1.0.0-rc.123 (#30) ... This is an UNSTABLE release. * jfjoch_broker: Use newer version of Google Ceres for (potential) CUDA 13 compatibility * jfjoch_broker: Improve performance of generating preview images, especially for large detectors (9M-16M) * jfjoch_viewer: Improve performance of displaying images, especially for large detectors (9M-16M) * jfjoch_viewer: Add more color schemes for better image readability * HDF5: Common mutex for reading and writing HDF5 if both operations were to happen in the same executable * HDF5: suppress warning if path (upstream group) doesn't exists when checking if leaf exists Reviewed-on: #30 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-01-30 13:43:09 +01:00
leonarski_f	27496b8207	v1.0.0-rc.122 (#29) ... This is an UNSTABLE release. * jfjoch_broker: Add thresholding to prefer shorter vectors after FFT * jfjoch_broker: Add experimental mosaicity estimation for rotation experiments (this is work in progress) * jfjoch_viewer: Display file opening errors * jfjoch_viewer: When loading files over DBus add retry/back-off till the file is available Reviewed-on: #29 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-12-16 15:27:40 +01:00
leonarski_f	e2b240356c	v1.0.0-rc.121 (#28) ... This is an UNSTABLE release. * jfjoch_broker: Report changes in the image buffer, so viewer doesn't reload constantly * jfjoch_viewer: Improve performance of loading images * jfjoch_viewer: Auto-throttle image loading in HTTP-sync / movie modes * jfjoch_viewer: Auto-foreground calculated with histogram * jfjoch_viewer: Fix rare segmentation fault Reviewed-on: #28 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-12-12 21:24:20 +01:00
leonarski_f	31a357fa57	v1.0.0-rc.113 (#19) ... This is an UNSTABLE release and not recommended for production use (please use rc.111 instead). * jfjoch_broker: Improve handling of rotation indexing * jfjoch_broker: More information saved in CBOR end message (WIP) * jfjoch_writer: Save rotation indexing lattice parameters and Niggli class * jfjoch_viewer: Remove (for now) primitive cell information Reviewed-on: #19 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-12-02 09:29:22 +01:00
leonarski_f	06949caf1a	v1.0.0-rc.112 (#18) ... This is an UNSTABLE release and not recommended for production use (please use rc.11 instead). * jfjoch_broker: Experimental rotation (3D) indexing * jfjoch_broker: Minor fix to error in optimizer potentially returning NaN values Reviewed-on: #18 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-11-30 17:39:22 +01:00
leonarski_f	4dbbf0e365	v1.0.0-rc.97 ... This is an UNSTABLE release and not recommended for production use (please use rc.96 instead). * jfjoch_broker: For DECTRIS detectors add dark data collection during initialization for bad pixel mask * jfjoch_broker: Refactor of calibration logic for more clear code (likely to introduce problems) * jfjoch_viewer: Add option to handle user pixel mask (experimental) * jfjoch_viewer: More options for ROI * jfjoch_viewer: Add window to display calibration Reviewed-on: #2 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2025-11-09 12:42:27 +01:00
leonarski_f	061152279c	v1.0.0-rc.91	2025-10-20 20:43:44 +02:00
leonarski_f	c44a07aac2	v1.0.0-rc.90	2025-10-02 15:55:39 +02:00
leonarski_f	5d9d2de4a4	v1.0.0-rc.81	2025-09-21 19:27:51 +02:00
leonarski_f	c67337cfe1	v1.0.0-rc.72	2025-09-08 20:28:59 +02:00
leonarski_f	dba807fadd	v1.0.0-rc.71	2025-08-28 07:07:01 +02:00
leonarski_f	bb32f27635	v1.0.0-rc.70	2025-08-27 06:21:10 +02:00
leonarski_f	20973792e4	v1.0.0-rc.68	2025-08-16 19:59:27 +02:00
leonarski_f	51cbef4c84	1.0.0-rc.66	2025-07-18 11:42:39 +02:00
leonarski_f	4da526c51b	v1.0.0-rc.63	2025-07-09 14:55:28 +02:00
leonarski_f	0b5f28f50d	v1.0.0-rc.62	2025-07-08 20:19:59 +02:00
leonarski_f	e4ec9fb38f	v1.0.0-rc.61	2025-07-08 07:16:59 +02:00
leonarski_f	99de57fe6f	1.0.0-rc.54	2025-06-29 10:56:38 +02:00
leonarski_f	50eaaaaf29	v1.0.0-rc.51	2025-06-22 13:15:10 +02:00
leonarski_f	0d1b388f4d	v1.0.0-rc.50	2025-06-20 09:52:26 +02:00
leonarski_f	fb87f376c8	v1.0.0-rc49	2025-06-18 15:19:18 +02:00
leonarski_f	259e17e483	VERSION to 1.0.0-rc.48	2025-06-17 17:20:43 +02:00
leonarski_f	ab5f502c8e	v1.0.0-rc.45	2025-06-16 12:48:17 +02:00
leonarski_f	b59a03ff02	v1.0.0-rc.44	2025-06-15 17:46:46 +02:00
leonarski_f	80251cc5b8	v1.0.0-rc.43	2025-06-13 16:00:50 +02:00
leonarski_f	a9c7d23b9e	v1.0.0-rc.42	2025-06-11 19:53:33 +02:00
leonarski_f	41a3e671f4	v1.0.0-rc.41	2025-06-10 18:14:04 +02:00
leonarski_f	53c90ee5d8	v1.0.0-rc.40	2025-05-28 18:49:27 +02:00
leonarski_f	040cf08386	v1.0.0-rc.36	2025-05-05 19:32:22 +02:00
leonarski_f	b0607ab3ca	v1.0.0-rc.34	2025-04-14 11:52:06 +02:00
leonarski_f	a30707964d	v.1.0.0-rc.32	2025-03-24 12:16:33 +01:00