sub problems were solved:
- sicsget was not reporting geterrors on nodes properly
- rwpuffer contained dirt after wrap
- property change events were added to hipadaba
- Some tuning of SICS output
- The number of codes was wrong in outcode.c
- Added initial version of sicsget. This is a more generalised way of
reading and writing SICS data wherever it is. The thing is extendable if
reading something the current way is to slow. This has both a C interface
and an interpreter interface.
- Added a multicountsersec to teplace hmcontrol and multicounter
- Fixed a case sensitivity bug in haddcheck
- Made oscillate work with second generation motors for POLDI
- Added a time stamper to trace. Now there will be time stamps in trace files which allow
to correlate things from the master log with the trace.
- Updated polterwrite.
- Updated testprot to work with the behave test
SKIPPED:
psi/make_gen
psi/polterwrite.c
psi/psi.c
psi/sputterprot.c
- Extended tasker to support task groups
- Added task functions for motors and counters
- Modifed devexec to use the new task functions
- Modified TAS to treat the monochromator separatly
- Coded a EIGER monochromator module to reflect even more new
requirements
- Added EPICS counters and motors
- Modified multicounter to be better performing
SKIPPED:
psi/eigermono.c
psi/make_gen
psi/makefile_linux
psi/psi.c
psi/sinqhttp.c
- Modifed many modules using histmem to work also with histmemsec
- Extended tasker with task names and task groups
- There is a new taskobj which allows to list tasks and to interact with them.
- Task now supports running Tcl functions as tasks
- There is a new experimental sctcomtask module which allows to define communication
tasks against a scriptcontext. This is a new feature which should facilitate
writing sequential scripts using asynchronous communication.
- A fix to make spss7 work when there are no switches
- ORION support for single X. TRICS measures crystals hanging down, ORION
standing up
SKIPPED:
psi/ease.c
psi/faverage.c
psi/jvlprot.c
psi/make_gen
psi/pardef.c
psi/polterwrite.c
psi/psi.c
psi/sinq.c
psi/spss7.c
- Added a staticoffset to motorsec.c in order to allow the use of softzero
for physics purposes.
- When a triple axis motor fails to start, the whole shit needs to be stopped.
This has now been implemented into tasdrive.c
- There were crashes in adding NB reflections to a reflection list. This has
been fixed.
- Removed generation of incommenurate reflections for 0,0,0 in fourmess.c
- Implemented a Poch command for heartbeats
- Fixed 64 bit dimension issues in nxdict
- Fixed different calling conventions for NXReportError deep stack in nxdict
- Stopped ei motor driving when not necessary
- Added yet another monitor for POLDI
- Added a protocoll driver for the JVL motor RS-485 binary protocoll
- Fixed some reporting issues
SKIPPED:
psi/jvlprot.c
psi/make_gen
psi/polterwrite.c
psi/psi.c
psi/spss7.c
- Added missing cnvrt files, stolen from Markus
- Debugged the new sinqhttpopt driver for SINQ HTTP HM
- Debugged the driver for the new S7 Siemens SPS
- Added handling of hexadecimal terminators to ascon.c
- Increased the write buffer size in asynnet again
- Fixed a core dump in lld.c
- Added writing of second gen HM to nxscript.c
- Added doubletime command to SICS
- Fixed a core dump issue in sicshdbadapter.c on dimension changes
- Modified sicsobj to look for lower case keys too
SKIPPED:
psi/cnvrt.c
psi/cnvrt.h
psi/el734hp.c
psi/make_gen
psi/sinqhttpopt.c
psi/sinqhttpprot.c
psi/spss7.c
psi/swmotor.c
- Added a warning for excessive data rates on monitors
- Added statistics to devser and thus to scriptcontext
- Added byte concatenation to dynstring
- Added aborting for reflection generation to fourmess.c
- Added data checksum testing to hipadaba, use for update tests
- Fixed interrupt discovery in network.c, caused invalid interrupt
codes which in turn confused sicscron which had to be fixed too.
- Renamed ubcalc into ubcalcint in order to reclaim the ubcalc for Jurg
- Added an a3offset to tasub in order to fix what I perceive an IS problem
- Added support for the newer version of the Siemens SPS, the S7
- Added a not yet fully working sinqhttpopt driver which talks to
http HM without libghttp
SKIPPED:
psi/delcam.c
psi/make_gen
psi/psi.c
psi/sinq.c
psi/sinq.h
psi/sinqhttpopt.c
psi/slsvme.c
psi/spss7.c
shutdown when nothing works as it should
- Made an attempt to have all error message printed on demand
- Added a tricsswap feature to sinqhttp which swaps the data right for SICS
- Edited speed for phytron driver
- First attack on adding a misalignment calculation to tasub
- Added a test protocol for scriptcontext which can be configured.
SKIPPED:
psi/sinqhttp.c
- Fixed a stack overrun bug in macro.c
- Fixed a killing bug in devser.c
- Added node writing with offset to nxscript.c
- Wrote a simulation driver for second generation HM's
- Readded devexec commands to SICS
- Readded Hipadaba initialisation to SICS
- Fixed a bug in sinqhttprot.c which is triggered when a reconnect happens
during a node based download of data.
SKIPPED:
psi/sinqhttpprot.c
- ofac.c contains now only the command in initialisation function list
- the other functions are moved to sicsutil.c
- moved DoubleTime and the content of access.c to sicsutil.c
- moved some initialisation code from ofac.c to the corresponding modules
to fourmess
- Fixed hdbtable, reflist and tasub up to work with GTSE
- Made TRICS do fast scans again
- Added support for SANS beam center calculations
- Fixed a bug where SICS apparently did double counting but in fact
just omitted an error message and did not
- Added the harray command
- Supressed superfluous message from fmess
- Expanded multicounter to deal with threshold commands nicely
- Fixed an an issue with an uninitialized dummy connection in nserver
- Many changes to simidex to make it work in a more reliable way.
- Added hdbfactory path alias targetpath
- Extended frame to deal with sinqhttp HM
- killing a node using sct should now be safe
- sctdrive adapter object might be dynamic
- default for the checkstatus script: returning the status property
- introduced <sctcon> unpoll
- changed <sctcon> queuecon to <sctcon> send
- some more improvements in sct
- Extended the Hdb adapter to support SICSdata
- Made the simulated histogram memory driver work properly when
data has been set.
- Implemented the hfactory command
- Removed hdbcommand which was never finsihed
- Added new ACT protocol
- Extended sicshdbadapter to cover counters and status to put the status
into Hipadaba
- Fixes to napi5.c
- Exe now supports hdbrun which allows to write output for a buffer into
hdb node.
