Ferdi Franceschini
a62a284372
Define Echidna sics_config.ini with configurable sample stage.
2014-07-24 13:53:33 +10:00
Douglas Clowes
972e3232cd
Change the names in all of the files
2014-07-23 17:30:44 +10:00
Douglas Clowes
9c90153f37
Perform the rename
2014-07-23 17:14:18 +10:00
Douglas Clowes
e04785f3a8
Code to generate the move/rename
2014-07-23 17:14:13 +10:00
Douglas Clowes
dda4a0f8f6
Fix erroneous filenames that match other files
2014-07-23 16:20:34 +10:00
Douglas Clowes
dedcc49284
Fix erroneous filenames that match other files
2014-07-23 16:20:22 +10:00
Douglas Clowes
e3b583150e
SICS-696 Explicity include the namespace on mk_sct_ calls
2014-07-23 14:32:26 +10:00
Douglas Clowes
16b435befe
Fix an unbalanced brace
2014-07-23 14:27:50 +10:00
Douglas Clowes
8d4366fa95
Change newserver to a link to server_date_time in deploySICS
2014-07-21 15:50:43 +10:00
Douglas Clowes
001d41a703
Change newserver to a link to server_date_time in deploySICS
2014-07-21 15:34:18 +10:00
Douglas Clowes
ab3d7c5adf
Remove explicit test debug_threshold from SCT files and regenerate
2014-07-21 10:58:01 +10:00
Ferdi Franceschini
b9f67a2562
Fix saving t0_chopper_freq and tof length values.
2014-07-20 21:42:36 +10:00
Ferdi Franceschini
3d051f5bb9
Update aperture positions from Bilby spreadsheet.
2014-07-20 21:29:48 +10:00
Ferdi Franceschini
c992ae0a2c
Refactor aperture selection and report aperture positions at end of drive.
...
Improve feedback.
2014-07-20 21:29:19 +10:00
Ferdi Franceschini
b9b386e3f6
Capture error messages in prun and pdrive.
2014-07-20 20:49:20 +10:00
1d1f102b08
- Fixed a serious bug in interface.c introduced while cleaning SetStatus
2014-07-18 15:50:04 +02:00
f5e797dd6a
- Cleaned all old dtatus setting code
2014-07-18 14:02:57 +02:00
Ferdi Franceschini
0becbe914a
Use the sct_pulser sctcontroller generated from the agilent_33220A.sct wrapper.
2014-07-18 15:54:59 +10:00
Ferdi Franceschini
9752c6dbaf
Fix list of apertures which should be raised before moving guides.
...
Optimise aperture selection.
2014-07-18 14:33:16 +10:00
Ferdi Franceschini
b5b8b32788
Don't report non-numeric values on Ltof hdb nodes.
...
This also eliminates logging type violation errors caused by polling of the hdb nodes when the guides are misaligned.
Make sure that aprrest_list is empty when N = 8
Improved argument checking and optimisations.
Also allow for setting an offset to the aperture positions on initialisation.
This was found to be necessary after the encoders were replace and ap2 upperlimit
was found to be lower than the ap2 topmost position for an aperture.
2014-07-18 00:16:27 +10:00
Ferdi Franceschini
17c212ee2e
Merge branch 'RELEASE-3_1' into RELEASE-3_2
2014-07-17 11:55:26 +10:00
Ferdi Franceschini
bffd3ae130
Workaround for SICS-596 'histmem loadconf' fails while histogram is running.
...
The hmm init was being issued before the histogram had actually stopped.
2014-07-17 11:01:18 +10:00
Ferdi Franceschini
0cc126572d
nguide now selects apertures as well as guides.
2014-07-17 09:44:56 +10:00
Ferdi Franceschini
b5c64c2a03
Add convenience commands prun and pdrive for posit motors.
2014-07-17 09:44:18 +10:00
Ferdi Franceschini
22c701b816
Fix LS340 tc driveable by setting the right value for the model number.
2014-07-17 08:55:19 +10:00
Ferdi Franceschini
423244858e
Added t0_chopper_freq for Bilby.
2014-07-16 15:02:49 +10:00
Ferdi Franceschini
3d6488e254
Rename blade to disk for Bilby choppers.
2014-07-16 15:02:18 +10:00
Douglas Clowes
b217eb0dcf
Add whatsthere.py to check revs on instruments
2014-07-16 12:57:33 +10:00
Douglas Clowes
d698c302fd
Merge branch 'RELEASE-3_1' into temp
...
Conflicts:
sics/site_ansto/instrument/config/environment/temperature/julabo_lh45.sct
sics/site_ansto/instrument/util/config_edit.py
sics/site_ansto/instrument/util/gen_sct.py
2014-07-16 12:56:40 +10:00
Ferdi Franceschini
0e53fe3757
Save 5T magnet sensor reading and setpoint.
2014-07-16 11:27:13 +10:00
Ferdi Franceschini
de264c5f02
Update 5T magnet driver name in Quokka sics_config.ini
2014-07-16 10:11:37 +10:00
Ferdi Franceschini
c03bbdc38e
Add permlink to 5T magnet driver and load the driver in the quokka config.
2014-07-16 10:11:07 +10:00
Ferdi Franceschini
b29eecc549
Use V1 with I1 for autolab setup on wombat
2014-07-16 09:28:26 +10:00
6a47bd9441
Merge branch 'master' into status
2014-07-15 16:46:22 +02:00
db6167bfa1
- Removed old stuff in conman
...
- Fixed a bug in processnode which hangs SICS when processnode is called from multiple
clients on the same node
- Fixed a bug in multicountsersec which caused thrashing of the Tcl results which caused ugly
error messages when calling the transfer script. Now a copy of the connection is made
before calling the transfer script
2014-07-15 16:43:09 +02:00
Douglas Clowes
fd7d369ea2
Julabo sct driver to use @@NOREPLY@@
2014-07-15 18:52:09 +10:00
Douglas Clowes
acec319ee3
Zeroing rotary encoder motor steps fix
2014-07-15 18:52:05 +10:00
Douglas Clowes
db24e03106
Add sct driver for New Zealand magnet
2014-07-15 18:48:38 +10:00
Douglas Clowes
22b34395c1
SICS-761 Zero the motor step counter for rotary encoders.
2014-07-15 18:48:38 +10:00
Douglas Clowes
8849dc90c5
SICS-760 Add NOREPLY mechanism in aqadapter and asyncqueue
...
This removes the expectation of a reply when sending is suffixed
with "{0}" or "@@NOREPLY@@" or, for asyncqueue, a custom string.
2014-07-15 18:48:38 +10:00
Ferdi Franceschini
994f4a48c1
Add 5T New Zealand magnet configuration to Quokka configuration.
2014-07-15 17:30:51 +10:00
Ferdi Franceschini
739ab393a5
Add an Autolab setup to the Wombat config and fix the mercury configuration.
2014-07-15 15:20:20 +10:00
Ferdi Franceschini
4996d84187
Set an @description property on the protek sensor reading.
2014-07-15 15:17:59 +10:00
Ferdi Franceschini
d892d6c4df
Fix broken catch block
2014-07-15 12:51:41 +10:00
Ferdi Franceschini
c1b5b558f0
Make all sct drivers.
2014-07-15 10:56:27 +10:00
Ferdi Franceschini
ac136f3426
Cleanup legacy Julabo driver.
2014-07-15 08:59:20 +10:00
Ferdi Franceschini
c83e5d681c
Update sics_config.ini files for Wombat and Quokka.
2014-07-15 08:59:19 +10:00
Ferdi Franceschini
ee539a5341
Load wrapper code for legacy drivers.
2014-07-15 08:59:18 +10:00
Ferdi Franceschini
58a64da712
Wrapper code for legacy drivers.
2014-07-15 08:59:18 +10:00
Ferdi Franceschini
67b8576f35
Modify legacy drivers so that they can be called by sct wrappers and define wrapper templates.
2014-07-15 08:59:17 +10:00
