14ee1d66e0
kapillarheizung: state as of 2025-11-26
...
Comment from Markus:
This needs some redesign. We should not map each
logo parameter to a SECoP module.
I guess that the switch to turn off the heater should be
integrated into the heater modules.
In addition we have to rebase to the wip branch, which would need
a merged version of frappy_psi/logo.py.
2025-11-26 16:20:47 +01:00
6d90f02dd6
in the config file some modules required a frappy.logo.ControlHeater class
...
this class does not exist.
in the config these modules where now defined using the HeaterParam class
The Server starts, but iti is unclear if it fullfils the intended behaviour
Please fix
2025-03-20 15:25:22 +01:00
a26b7b69fa
added description, remove not working cernox
2024-11-18 11:23:22 +01:00
92a8dfac5d
fixed heater level
...
- should be percent
- round to integer before writing to logo
2024-06-11 13:47:36 +02:00
5e5f262472
remove dinp/dout from sea json temperature
...
dinp and dout is not available on ls336 and not really
needed on ls340
2024-06-06 15:28:21 +02:00
9995ac8165
fix ori4 config (align to other cryos)
2024-06-06 08:59:32 +02:00
Georg Brandl
6dfb3bcee8
add config for the Entangle simulation server
...
Change-Id: I9e7564707fc98d3b5dc3182d7837b222aefef582
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/33692
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de >
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de >
Reviewed-by: Georg Brandl <g.brandl@fz-juelich.de >
2024-05-28 17:29:37 +02:00
76349e38f9
add cfg files from zebra: Ma10heat, ma10high_t, ma6_sampleheat
2024-05-03 08:25:50 +02:00
798c268eb4
hvolt_long_cfg.py
2024-05-02 16:36:43 +02:00
a7ff73a34d
set comlog automatically on
2024-05-02 14:54:52 +02:00
bf018e74ba
add backlash to MA10 motor
2024-05-02 14:47:36 +02:00
801f80af7f
add cfg files for gas stick
2024-05-02 14:47:36 +02:00
26fa5371e9
add piezo/thermalc from sans
2024-05-02 13:06:40 +02:00
2bad1ffee5
update haake/ma7/ma11/ovenstick from sans
2024-05-02 11:47:33 +02:00
55c96ffe4f
add FW cfg
2024-04-30 09:24:07 +02:00
17a44ef42a
fixed dilsc, fist try before tests
...
Change-Id: Iaac5f07c27879c7c17be2e25defde19e9ddd1566
2024-04-29 12:18:12 +02:00
l_samenv
adfb561308
add cetoni pump for flowsas project
2024-04-03 11:31:38 +02:00
l_samenv
8ee97ade63
adjust cfg foe attocube to current example
2024-03-27 17:13:58 +01:00
db29776dd5
reworked attocube
...
- step_mode: soft closed loop, stepwise, reading encoder after a delay
- calib_steps command to determine step size
Change-Id: I27bdffb4d564ac9c55a6473704ac2de6ad92bac8
2024-03-25 16:47:13 +01:00
16b826394f
fixes for attocube
...
Change-Id: Id5eeb749ba010fec59d1c2f8a3258ee34a47e246
2024-03-20 16:59:04 +01:00
l_samenv
ea8570d422
wip: fix attocube
2024-03-20 16:12:03 +01:00
l_samenv
5b0da3ba98
fixes on 2023-11-27
...
- ls372 autorange: wait one sec. more for switching
- keep only one channel, even after target is reached
- intermediate target only when T is raise, but not when lowered
2024-02-23 10:13:05 +01:00
l_samenv
8cb9154bb5
flamesample: use odd fraction for limits
...
workaround for problems when driving exactly to the limit
2024-02-23 10:10:29 +01:00
l_samenv
813d1b76ef
remove 1K plate heater configuration
...
this heater does not exist
2024-02-19 12:47:52 +01:00
Alexander Zaft
a16ec6cc91
mlz/demo: move old examples to Attached
...
change very early version of module attachments in GarfieldMagnet and
MagnetigField to use Attached
Change-Id: I616ad17bc72cd93d86e1b3e3609543cfe90edcd8
Reviewed-on: https://forge.frm2.tum.de/review/c/secop/frappy/+/32250
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch >
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de >
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de >
2024-01-29 13:34:29 +01:00
a8bafde64e
add test cfg for lockin 7270
...
Change-Id: Ic6d66b625feb44e8130266901f1296adcb11f532
2024-01-29 10:58:21 +01:00
Oksana Shliakhtun
17b7a01ce1
Driver for ThermoHaake Phoenix P1 Circulator
...
Change-Id: I0573eeac2e40b4715072661c819701186733bf94
2024-01-29 10:29:33 +01:00
l_samenv
bc7922f5c8
iono pi max demo (drums)
...
+ fix spacing in ionopimax.py
2024-01-25 09:40:10 +01:00
9e000528d2
add vacuum furnace cfg file
2024-01-11 16:33:06 +01:00
afb49199a1
fixes in mb11/dil5 cfg files
...
- add flowpars
- increase om range to -360
- add sea config
2023-12-04 15:45:00 +01:00
l_samenv
ab918a33ae
cc: replace bool by enum in cc.hav and cc.nav
2023-11-23 15:56:23 +01:00
67032ff59b
ma6: set backlash
2023-10-27 15:11:19 +02:00
06bec41ed3
ma6: make ts drivable
2023-10-02 16:56:23 +02:00
4cd6929d4b
fix ma15 sea config
2023-10-02 16:55:42 +02:00
a89f7a3c44
configs for sample heat stick
2023-10-02 16:54:52 +02:00
3b997d7d86
Merge branch 'wip' of gitlab.psi.ch-samenv:samenv/frappy into wip
2023-09-22 13:29:23 +02:00
612295d360
add ill2
2023-09-22 13:29:04 +02:00
9e39a43193
fix fs config
2023-09-22 13:27:54 +02:00
6adfafaa27
more consistent ori1 stick json file
2023-09-22 13:27:10 +02:00
f6c4090b96
fix simulation
...
+ some fixed in sim_uniax
Change-Id: Ia8703ed988aa904bb2694339f0d3175b28fcb33e
2023-09-19 16:05:52 +02:00
ecef2b8974
more cfg file fixes
...
Change-Id: I0ba86cd17bb07f480cac6f20994ee854c6e811ae
2023-09-19 15:04:02 +02:00
l_samenv
96a7e2109b
cleanup cfg files
2023-09-19 14:43:48 +02:00
l_samenv
e9a195d61e
flamedil as of 2023-07-04
2023-09-19 14:17:08 +02:00
l_samenv
6ac3938b78
flamedil as of 2023-07-03
2023-09-19 14:17:08 +02:00
l_samenv
b4cfdcfc1a
flame sample combined T
2023-09-19 14:16:21 +02:00
l_samenv
abf7859fd6
frappy_psi.cryoltd: fixes after frappy upgrade
2023-09-19 14:14:12 +02:00
27600e3ddf
fix bad cfg files
...
Change-Id: Iacba12a2679777dd4ea2892751d82a63221b1361
2023-09-19 14:07:20 +02:00
dee8f8929e
Merge branch 'wip' of gitlab.psi.ch-samenv:samenv/frappy into wip
2023-09-08 10:46:13 +02:00
2e143963df
stickmotor addon: add backlash -1
2023-09-08 10:45:18 +02:00
4bc82c2896
Merge branch 'wip' of gitlab.psi.ch-samenv:samenv/frappy into wip
2023-09-06 08:39:22 +02:00
