Adjusted symbol visibility for 1.1.1

Makefile

@@ -34,4 +34,4 @@ TEMPLATES += db/turboPmac.db
 DBDS += sinqMotor/src/sinqMotor.dbd
 DBDS += src/turboPmac.dbd
 
-USR_CFLAGS += -Wall -Wextra -Weffc++ -Wunused-result -Werror # -Wpedantic // Does not work because EPICS macros trigger warnings
+USR_CFLAGS += -Wall -Wextra -Weffc++ -Wunused-result -Werror -fvisibility=hidden # -Wpedantic // Does not work because EPICS macros trigger warnings

README.md

@@ -1,6 +1,6 @@
 # turboPmac
 
-## <span style="color:red">Please read the documentation of sinqMotor first: https://gitea.psi.ch/lin-epics-modules/sinqMotor</span>
+## <span style="color:red">Please read the documentation of sinqMotor first: https://git.psi.ch/sinq-epics-modules/sinqmotor</span>
 
 ## Overview
 
@@ -8,7 +8,7 @@ This is a driver for the Turbo PMAC motion controller with the SINQ communicatio
 
 ## User guide
 
-This driver is a standard sinqMotor-derived which however uses a special low level IP Port driver (`pmacAsynIPPortConfigure`) instead of the standard `drvAsynIPPortConfigure`. For the general configuration, please see https://gitea.psi.ch/lin-epics-modules/sinqMotor/src/branch/main/README.md.
+This driver is a standard sinqMotor-derived which however uses a special low level IP Port driver (`pmacAsynIPPortConfigure`) instead of the standard `drvAsynIPPortConfigure`. For the general configuration, please see https://git.psi.ch/sinq-epics-modules/sinqmotor/-/blob/main/README.md.
 
 The folder "utils" contains utility scripts for working with pmac motor controllers. To read their manual, run the scripts without any arguments.
 - writeRead.py: Allows sending commands to and receiving commands from a pmac controller over an ethernet connection.
@@ -67,8 +67,8 @@ dbLoadRecords("$(turboPmac_DB)/asynRecord.db","P=$(INSTR)$(DRIVER_PORT),PORT=$(I
 
 ### Versioning
 
-Please see the documentation for the module sinqMotor: https://gitea.psi.ch/lin-epics-modules/sinqMotor/src/branch/main/README.md.
+Please see the documentation for the module sinqMotor: https://git.psi.ch/sinq-epics-modules/sinqmotor/-/blob/main/README.md.
 
 ### How to build it
 
-This driver can be compiled and installed by running `make install` from the same directory where the Makefile is located. However, since it uses the git submodule sinqMotor, make sure that the correct version of the submodule repository is checked out AND the change is commited (`git status` shows no non-committed changes). Please see the section "Usage as static dependency" in https://gitea.psi.ch/lin-epics-modules/sinqMotor/src/branch/main/README.md for more details.
+This driver can be compiled and installed by running `make install` from the same directory where the Makefile is located. However, since it uses the git submodule sinqMotor, make sure that the correct version of the submodule repository is checked out AND the change is commited (`git status` shows no non-committed changes). Please see the section "Usage as static dependency" in https://git.psi.ch/sinq-epics-modules/sinqmotor/-/blob/main/README.md for more details.

src/turboPmacAxis.h

@@ -1,11 +1,15 @@
 #ifndef turboPmacAXIS_H
 #define turboPmacAXIS_H
-#include "sinqController.h"
-#include "turboPmacController.h"
+#include "sinqAxis.h"
 #include <memory>
 
 struct turboPmacAxisImpl;
 
+// Forward declaration of the controller class to resolve the cyclic dependency
+// between the controller and the axis .h-file. See
+// https://en.cppreference.com/w/cpp/language/class.
+class turboPmacController;
+
 class turboPmacAxis : public sinqAxis {
   public:
     /**
@@ -138,11 +142,6 @@ class turboPmacAxis : public sinqAxis {
      */
     void setNeedInit(bool needInit);
 
-    /**
-     * @brief Return a pointer to the axis controller
-     */
-    virtual turboPmacController *pController() override { return pC_; };
-
   private:
     turboPmacController *pC_;
     std::unique_ptr<turboPmacAxisImpl> pTurboPmacA_;

src/turboPmacController.cpp

@@ -206,7 +206,9 @@ asynStatus turboPmacController::writeRead(int axisNo, const char *command,
 
     // Definition of local variables.
     asynStatus status = asynSuccess;
+    asynStatus paramLibStatus = asynSuccess;
     asynStatus timeoutStatus = asynSuccess;
+    // char fullCommand[MAXBUF_] = {0};
     char drvMessageText[MAXBUF_] = {0};
     char modResponse[MAXBUF_] = {0};
     int motorStatusProblem = 0;
@@ -254,10 +256,6 @@ asynStatus turboPmacController::writeRead(int axisNo, const char *command,
         pasynOctetSyncIOipPort(), command, commandLength, response, MAXBUF_,
         pTurboPmacC_->comTimeout, &nbytesOut, &nbytesIn, &eomReason);
 
-    // if (strchr(command, '=')) {
-    //     usleep(20000);
-    // }
-
     msgPrintControlKey comKey =
         msgPrintControlKey(portName, axisNo, __PRETTY_FUNCTION__, __LINE__);
 
@@ -430,18 +428,41 @@ asynStatus turboPmacController::writeRead(int axisNo, const char *command,
 
     // Log the overall status (communication successfull or not)
     if (status == asynSuccess) {
-        setAxisParamChecked(axis, motorStatusCommsError, false);
+        paramLibStatus = axis->setIntegerParam(this->motorStatusCommsError_, 0);
     } else {
         // Check if the axis already is in an error communication mode. If
         // it is not, upstream the error. This is done to avoid "flooding"
         // the user with different error messages if more than one error
         // ocurred before an error-free communication
-        getAxisParamChecked(axis, motorStatusProblem, &motorStatusProblem);
+        paramLibStatus =
+            getIntegerParam(axisNo, motorStatusProblem_, &motorStatusProblem);
+        if (paramLibStatus != asynSuccess) {
+            return paramLibAccessFailed(paramLibStatus, "motorStatusProblem",
+                                        axisNo, __PRETTY_FUNCTION__, __LINE__);
+        }
 
         if (motorStatusProblem == 0) {
-            setAxisParamChecked(axis, motorMessageText, drvMessageText);
-            setAxisParamChecked(axis, motorStatusProblem, true);
-            setAxisParamChecked(axis, motorStatusCommsError, true);
+            paramLibStatus =
+                axis->setStringParam(motorMessageText(), drvMessageText);
+            if (paramLibStatus != asynSuccess) {
+                return paramLibAccessFailed(paramLibStatus, "motorMessageText",
+                                            axisNo, __PRETTY_FUNCTION__,
+                                            __LINE__);
+            }
+
+            paramLibStatus = axis->setIntegerParam(motorStatusProblem_, 1);
+            if (paramLibStatus != asynSuccess) {
+                return paramLibAccessFailed(paramLibStatus,
+                                            "motorStatusProblem", axisNo,
+                                            __PRETTY_FUNCTION__, __LINE__);
+            }
+
+            paramLibStatus = axis->setIntegerParam(motorStatusProblem_, 1);
+            if (paramLibStatus != asynSuccess) {
+                return paramLibAccessFailed(paramLibStatus,
+                                            "motorStatusCommsError", axisNo,
+                                            __PRETTY_FUNCTION__, __LINE__);
+            }
         }
     }
     return status;

src/turboPmacController.h

@@ -10,13 +10,9 @@
 #define turboPmacController_H
 #include "sinqAxis.h"
 #include "sinqController.h"
+#include "turboPmacAxis.h"
 #include <memory>
 
-// Forward declaration of the controller class to resolve the cyclic dependency
-// between the controller and the axis .h-file. See
-// https://en.cppreference.com/w/cpp/language/class.
-class turboPmacAxis;
-
 struct turboPmacControllerImpl;
 
 class turboPmacController : public sinqController {