lin-epics-modules

This organisation contains Epics Drivers developed by LIN-Controls.

Updated 2026-04-16 08:25:31 +02:00
Epics drivers for ePowerSwitch-8M+ and ePowerSwitch-4IEC
Updated 2026-04-15 09:04:50 +02:00
SPS Templates for interfacing with standardised "modules" on SINQ SPS systems
Updated 2026-04-13 10:55:09 +02:00
Epics Interface to the Neutron Detector Boxes used at SINQ
Updated 2026-04-09 11:38:34 +02:00
Driver for the SINQ masterMacs motion controller family
Updated 2026-04-09 10:50:26 +02:00
Driver for the Turbo PMAC motion controller (PSI CNM version)
Updated 2026-03-31 16:40:13 +02:00
Common functionality for SINQ motor controllers
Updated 2026-03-31 16:34:47 +02:00
This is motor record version 7. The older (incompatible) motor record version 6 is here: https://git.psi.ch/epics_driver_modules/motor. The "upstream" branch is a fork of https://github.com/epics-modules/motor. Do not modify that one. All used submodules have their own repo. Don't modify them here.
Updated 2026-03-24 14:30:51 +01:00
Setup to test the motor drivers against real hardware on sinqtest
Updated 2026-03-24 08:35:11 +01:00
Interface to Multi-Detector Interface
Updated 2026-03-13 15:44:01 +01:00
Driver for the selene guide at AMOR (based on the turboPmac driver)
Updated 2026-02-11 11:18:20 +01:00
Driver for the detector tower at AMOR (based on the turboPmac driver)
Updated 2025-12-23 13:49:16 +01:00
EPICS driver for the granite beam shift based on the generalized TURBO PMAC driver.
Updated 2025-12-23 13:34:45 +01:00
Driver for the EL734 motion controller (PSI CNM version)
Updated 2025-12-23 12:20:28 +01:00
An re-implementation of SINQ's Data Acquisition Hardware Boxes in Software.
Updated 2025-11-24 11:12:18 +01:00

Members 4