Links in README.md updated to point to Gitea now.

README.md

@@ -1,6 +1,6 @@
 # turboPmac
 
-## <span style="color:red">Please read the documentation of sinqMotor first: https://git.psi.ch/sinq-epics-modules/sinqmotor</span>
+## <span style="color:red">Please read the documentation of sinqMotor first: https://gitea.psi.ch/lin-epics-modules/sinqMotor</span>
 
 ## Overview
 
@@ -8,7 +8,7 @@ This is a driver for the Turbo PMAC motion controller with the SINQ communicatio
 
 ## User guide
 
-This driver is a standard sinqMotor-derived which however uses a special low level IP Port driver (`pmacAsynIPPortConfigure`) instead of the standard `drvAsynIPPortConfigure`. For the general configuration, please see https://git.psi.ch/sinq-epics-modules/sinqmotor/-/blob/main/README.md.
+This driver is a standard sinqMotor-derived which however uses a special low level IP Port driver (`pmacAsynIPPortConfigure`) instead of the standard `drvAsynIPPortConfigure`. For the general configuration, please see https://gitea.psi.ch/lin-epics-modules/sinqMotor/src/branch/main/README.md.
 
 The folder "utils" contains utility scripts for working with pmac motor controllers. To read their manual, run the scripts without any arguments.
 - writeRead.py: Allows sending commands to and receiving commands from a pmac controller over an ethernet connection.
@@ -67,8 +67,8 @@ dbLoadRecords("$(turboPmac_DB)/asynRecord.db","P=$(INSTR)$(DRIVER_PORT),PORT=$(I
 
 ### Versioning
 
-Please see the documentation for the module sinqMotor: https://git.psi.ch/sinq-epics-modules/sinqmotor/-/blob/main/README.md.
+Please see the documentation for the module sinqMotor: https://gitea.psi.ch/lin-epics-modules/sinqMotor/src/branch/main/README.md.
 
 ### How to build it
 
-This driver can be compiled and installed by running `make install` from the same directory where the Makefile is located. However, since it uses the git submodule sinqMotor, make sure that the correct version of the submodule repository is checked out AND the change is commited (`git status` shows no non-committed changes). Please see the section "Usage as static dependency" in https://git.psi.ch/sinq-epics-modules/sinqmotor/-/blob/main/README.md for more details.
+This driver can be compiled and installed by running `make install` from the same directory where the Makefile is located. However, since it uses the git submodule sinqMotor, make sure that the correct version of the submodule repository is checked out AND the change is commited (`git status` shows no non-committed changes). Please see the section "Usage as static dependency" in https://gitea.psi.ch/lin-epics-modules/sinqMotor/src/branch/main/README.md for more details.

src/turboPmacAxis.cpp

@@ -194,11 +194,7 @@ asynStatus turboPmacAxis::init() {
     }
 
     // Initial motor status is idle
-    status = pC_->setIntegerParam(axisNo_, pC_->motorStatusDone(), 1);
-    if (status != asynSuccess) {
-        return pC_->paramLibAccessFailed(status, "motorStatusDone_", axisNo_,
-                                         __PRETTY_FUNCTION__, __LINE__);
-    }
+    setAxisParamChecked(this, motorStatusDone, 1);
 
     // Write to the motor record fields
     status = setVeloFields(motorVelocity, 0.0, motorVmax);
@@ -239,10 +235,7 @@ asynStatus turboPmacAxis::doPoll(bool *moving) {
     asynStatus errorStatus = asynSuccess;
 
     // Status of read-write-operations of ASCII commands to the controller
-    asynStatus rw_status = asynSuccess;
-
-    // Status of parameter library operations
-    asynStatus pl_status = asynSuccess;
+    asynStatus status = asynSuccess;
 
     char command[pC_->MAXBUF_] = {0};
     char response[pC_->MAXBUF_] = {0};
@@ -266,9 +259,9 @@ asynStatus turboPmacAxis::doPoll(bool *moving) {
     // =========================================================================
 
     if (pTurboPmacA_->needInit) {
-        rw_status = init();
-        if (rw_status != asynSuccess) {
-            return rw_status;
+        status = init();
+        if (status != asynSuccess) {
+            return status;
         }
     }
 
@@ -292,22 +285,16 @@ asynStatus turboPmacAxis::doPoll(bool *moving) {
         }
 
         if (timedOut) {
-            pl_status =
-                setStringParam(pC_->motorMessageText(),
-                               "Timed out while waiting for a handshake");
-            if (pl_status != asynSuccess) {
-                return pC_->paramLibAccessFailed(pl_status, "motorMessageText_",
-                                                 axisNo_, __PRETTY_FUNCTION__,
-                                                 __LINE__);
-            }
+            setAxisParamChecked(this, motorMessageText,
+                                "Timed out while waiting for a handshake");
             pTurboPmacA_->waitForHandshake = false;
         }
 
         snprintf(command, sizeof(command), "P%2.2d23 P%2.2d01", axisNo_,
                  axisNo_);
-        rw_status = pC_->writeRead(axisNo_, command, response, 2);
-        if (rw_status != asynSuccess) {
-            return rw_status;
+        status = pC_->writeRead(axisNo_, command, response, 2);
+        if (status != asynSuccess) {
+            return status;
         }
 
         nvals = sscanf(response, "%d %d", &handshakePerformed, &error);
@@ -330,52 +317,30 @@ asynStatus turboPmacAxis::doPoll(bool *moving) {
             // poll. This is already part of the movement procedure.
             *moving = true;
 
-            pl_status = setIntegerParam(pC_->motorStatusMoving(), *moving);
-            if (pl_status != asynSuccess) {
-                return pC_->paramLibAccessFailed(pl_status,
-                                                 "motorStatusMoving_", axisNo_,
-                                                 __PRETTY_FUNCTION__, __LINE__);
-            }
-
-            pl_status = setIntegerParam(pC_->motorStatusDone(), !(*moving));
-            if (pl_status != asynSuccess) {
-                return pC_->paramLibAccessFailed(pl_status, "motorStatusDone_",
-                                                 axisNo_, __PRETTY_FUNCTION__,
-                                                 __LINE__);
-            }
+            setAxisParamChecked(this, motorStatusMoving, *moving);
+            setAxisParamChecked(this, motorStatusDone, !(*moving));
 
             return asynSuccess;
         }
     }
 
-    pl_status = pC_->getDoubleParam(axisNo_, pC_->motorRecResolution(),
-                                    &motorRecResolution);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "motorRecResolution_",
-                                         axisNo_, __PRETTY_FUNCTION__,
-                                         __LINE__);
-    }
+    getAxisParamChecked(this, motorRecResolution, &motorRecResolution);
 
     // Read the previous motor position
-    pl_status = motorPosition(&previousPosition);
-    if (pl_status != asynSuccess) {
-        return pl_status;
+    status = motorPosition(&previousPosition);
+    if (status != asynSuccess) {
+        return status;
     }
 
-    pl_status = pC_->getIntegerParam(axisNo_, pC_->motorStatusDone(),
-                                     &previousStatusDone);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "motorStatusDone_", axisNo_,
-                                         __PRETTY_FUNCTION__, __LINE__);
-    }
+    getAxisParamChecked(this, motorStatusDone, &previousStatusDone);
 
     // Query the axis status
     snprintf(command, sizeof(command),
              "P%2.2d00 Q%2.2d10 P%2.2d01 Q%2.2d13 Q%2.2d14", axisNo_, axisNo_,
              axisNo_, axisNo_, axisNo_);
-    rw_status = pC_->writeRead(axisNo_, command, response, 5);
-    if (rw_status != asynSuccess) {
-        return rw_status;
+    status = pC_->writeRead(axisNo_, command, response, 5);
+    if (status != asynSuccess) {
+        return status;
     }
 
     nvals = sscanf(response, "%d %lf %d %lf %lf", &axStatus, &currentPosition,
@@ -397,13 +362,7 @@ asynStatus turboPmacAxis::doPoll(bool *moving) {
     directly, but need to shrink them a bit. In this case, we're shrinking them
     by limitsOffset on both sides.
     */
-    pl_status =
-        pC_->getDoubleParam(axisNo_, pC_->motorLimitsOffset(), &limitsOffset);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "motorLimitsOffset_",
-                                         axisNo_, __PRETTY_FUNCTION__,
-                                         __LINE__);
-    }
+    getAxisParamChecked(this, motorLimitsOffset, &limitsOffset);
     highLimit = highLimit - limitsOffset;
     lowLimit = lowLimit + limitsOffset;
 
@@ -411,12 +370,8 @@ asynStatus turboPmacAxis::doPoll(bool *moving) {
     pTurboPmacA_->axisStatus = axStatus;
 
     // Update the enablement PV
-    pl_status = setIntegerParam(pC_->motorEnableRBV(),
-                                (axStatus != -3 && axStatus != -5));
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "motorEnableRBV_", axisNo_,
-                                         __PRETTY_FUNCTION__, __LINE__);
-    }
+    setAxisParamChecked(this, motorEnableRBV,
+                        (axStatus != -3 && axStatus != -5));
 
     // Create the unique callsite identifier manually so it can be used later in
     // the shouldBePrinted calls.
@@ -448,13 +403,7 @@ asynStatus turboPmacAxis::doPoll(bool *moving) {
                 pC_->getMsgPrintControl().getSuffix());
         }
         resetCountStatus = false;
-
-        pl_status = setStringParam(pC_->motorMessageText(), "Emergency stop");
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(pl_status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
+        setAxisParamChecked(this, motorMessageText, "Emergency stop");
         break;
     case -3:
         // Disabled
@@ -547,12 +496,7 @@ asynStatus turboPmacAxis::doPoll(bool *moving) {
             userMessage, sizeof(userMessage),
             "Reached unknown state P%2.2d00 = %d. Please call the support.",
             axisNo_, error);
-        pl_status = setStringParam(pC_->motorMessageText(), userMessage);
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(pl_status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
+        setAxisParamChecked(this, motorMessageText, userMessage);
     }
 
     if (resetCountStatus) {
@@ -572,88 +516,44 @@ asynStatus turboPmacAxis::doPoll(bool *moving) {
 
     // Update the parameter library
     if (error != 0) {
-        pl_status = setIntegerParam(pC_->motorStatusProblem(), true);
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(pl_status, "motorStatusProblem_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
+        setAxisParamChecked(this, motorStatusProblem, true);
     }
 
     if (*moving == false) {
-        pl_status = setIntegerParam(pC_->motorMoveToHome(), 0);
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(pl_status, "motorMoveToHome_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
+        setAxisParamChecked(this, motorMoveToHome, false);
     }
 
-    pl_status = setIntegerParam(pC_->motorStatusMoving(), *moving);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "motorStatusMoving_",
-                                         axisNo_, __PRETTY_FUNCTION__,
-                                         __LINE__);
-    }
-
-    pl_status = setIntegerParam(pC_->motorStatusDone(), !(*moving));
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "motorStatusDone_", axisNo_,
-                                         __PRETTY_FUNCTION__, __LINE__);
-    }
-
-    pl_status = setIntegerParam(pC_->motorStatusDirection(), direction);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "motorStatusDirection_",
-                                         axisNo_, __PRETTY_FUNCTION__,
-                                         __LINE__);
-    }
+    setAxisParamChecked(this, motorStatusMoving, *moving);
+    setAxisParamChecked(this, motorStatusDone, !(*moving));
+    setAxisParamChecked(this, motorStatusDirection, direction);
 
     int limFromHardware = 0;
-    pl_status =
-        pC_->getIntegerParam(axisNo_, pC_->limFromHardware(), &limFromHardware);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "limFromHardware", axisNo_,
-                                         __PRETTY_FUNCTION__, __LINE__);
-    }
+    getAxisParamChecked(this, limFromHardware, &limFromHardware);
 
     if (limFromHardware != 0) {
-        pl_status = pC_->setDoubleParam(
-            axisNo_, pC_->motorHighLimitFromDriver(), highLimit);
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(
-                pl_status, "motorHighLimitFromDriver_", axisNo_,
-                __PRETTY_FUNCTION__, __LINE__);
-        }
-
-        pl_status = pC_->setDoubleParam(axisNo_, pC_->motorLowLimitFromDriver(),
-                                        lowLimit);
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(pl_status, "motorLowLimit_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
+        setAxisParamChecked(this, motorHighLimitFromDriver, highLimit);
+        setAxisParamChecked(this, motorLowLimitFromDriver, lowLimit);
     }
 
-    pl_status = setMotorPosition(currentPosition);
-    if (pl_status != asynSuccess) {
-        return pl_status;
+    status = setMotorPosition(currentPosition);
+    if (status != asynSuccess) {
+        return status;
     }
     return errorStatus;
 }
 
 asynStatus turboPmacAxis::handleError(int error, char *userMessage,
                                       int sizeUserMessage) {
-    asynStatus status = asynSuccess;
+    asynStatus status = asynError;
 
     // Create the unique callsite identifier manually so it can be used later in
     // the shouldBePrinted calls.
     msgPrintControlKey keyError = msgPrintControlKey(
         pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__);
-    bool resetError = true;
 
     switch (error) {
     case 0:
+        status = asynSuccess;
         // No error -> Reset the message repetition watchdog
         break;
     case 1:
@@ -667,17 +567,8 @@ asynStatus turboPmacAxis::handleError(int error, char *userMessage,
                       pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
                       pC_->getMsgPrintControl().getSuffix());
         }
-        resetError = false;
-
-        status = setStringParam(pC_->motorMessageText(),
-                                "Target position would exceed software limits");
-        if (status != asynSuccess) {
-            return pC_->paramLibAccessFailed(status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
-
-        status = asynError;
+        setAxisParamChecked(this, motorMessageText,
+                            "Target position would exceed software limits");
         break;
     case 5:
         // Command not possible
@@ -691,18 +582,9 @@ asynStatus turboPmacAxis::handleError(int error, char *userMessage,
                 pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
                 pC_->getMsgPrintControl().getSuffix());
         }
-        resetError = false;
-
-        status = setStringParam(pC_->motorMessageText(),
-                                "Axis received move command while it is "
-                                "still moving. Please call the support.");
-        if (status != asynSuccess) {
-            return pC_->paramLibAccessFailed(status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
-
-        status = asynError;
+        setAxisParamChecked(this, motorMessageText,
+                            "Axis received move command while it is still "
+                            "moving. Please call the support.");
         break;
     case 8:
         if (pC_->getMsgPrintControl().shouldBePrinted(keyError, true,
@@ -713,19 +595,11 @@ asynStatus turboPmacAxis::handleError(int error, char *userMessage,
                       pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
                       axisNo_, error, pC_->getMsgPrintControl().getSuffix());
         }
-        resetError = false;
-
         snprintf(userMessage, sizeUserMessage,
                  "Air cushion feedback stopped during movement (P%2.2d01 = "
                  "%d). Please call the support.",
                  axisNo_, error);
-
-        status = setStringParam(pC_->motorMessageText(), userMessage);
-        if (status != asynSuccess) {
-            return pC_->paramLibAccessFailed(status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
+        setAxisParamChecked(this, motorMessageText, userMessage);
         break;
     case 9:
         if (pC_->getMsgPrintControl().shouldBePrinted(keyError, true,
@@ -737,18 +611,12 @@ asynStatus turboPmacAxis::handleError(int error, char *userMessage,
                 pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__, axisNo_,
                 error, pC_->getMsgPrintControl().getSuffix());
         }
-        resetError = false;
 
         snprintf(userMessage, sizeUserMessage,
                  "No air cushion feedback before movement start (P%2.2d01 = "
                  "%d). Please call the support.",
                  axisNo_, error);
-        status = setStringParam(pC_->motorMessageText(), userMessage);
-        if (status != asynSuccess) {
-            return pC_->paramLibAccessFailed(status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
+        setAxisParamChecked(this, motorMessageText, userMessage);
         break;
     case 10:
         /*
@@ -767,23 +635,13 @@ asynStatus turboPmacAxis::handleError(int error, char *userMessage,
                 pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
                 pC_->getMsgPrintControl().getSuffix());
         }
-        resetError = false;
-
         snprintf(userMessage, sizeUserMessage,
                  "Software limits or end switch hit (P%2.2d01 = %d). Try "
                  "homing the motor, moving in the opposite direction or check "
                  "the SPS for errors (if available). "
                  "Otherwise please call the support.",
                  axisNo_, error);
-
-        status = setStringParam(pC_->motorMessageText(), userMessage);
-        if (status != asynSuccess) {
-            return pC_->paramLibAccessFailed(status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
-
-        status = asynError;
+        setAxisParamChecked(this, motorMessageText, userMessage);
         break;
     case 11:
         // Following error
@@ -797,21 +655,12 @@ asynStatus turboPmacAxis::handleError(int error, char *userMessage,
                 pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
                 pC_->getMsgPrintControl().getSuffix());
         }
-        resetError = false;
-
         snprintf(userMessage, sizeUserMessage,
                  "Maximum allowed following error exceeded (P%2.2d01 = %d). "
                  "Check if movement range is blocked. "
                  "Otherwise please call the support.",
                  axisNo_, error);
-        status = setStringParam(pC_->motorMessageText(), userMessage);
-        if (status != asynSuccess) {
-            return pC_->paramLibAccessFailed(status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
-
-        status = asynError;
+        setAxisParamChecked(this, motorMessageText, userMessage);
         break;
 
     case 12:
@@ -823,21 +672,12 @@ asynStatus turboPmacAxis::handleError(int error, char *userMessage,
                       pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
                       axisNo_, error, pC_->getMsgPrintControl().getSuffix());
         }
-        resetError = false;
-
         snprintf(userMessage, sizeUserMessage,
                  "Security input is triggered (P%2.2d01 = %d). Check the SPS "
                  "for errors (if available). Otherwise please call "
                  "the support.",
                  axisNo_, error);
-        status = setStringParam(pC_->motorMessageText(), userMessage);
-        if (status != asynSuccess) {
-            return pC_->paramLibAccessFailed(status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
-
-        status = asynError;
+        setAxisParamChecked(this, motorMessageText, userMessage);
         break;
 
     case 13:
@@ -851,25 +691,15 @@ asynStatus turboPmacAxis::handleError(int error, char *userMessage,
                       pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
                       pC_->getMsgPrintControl().getSuffix());
         }
-        resetError = false;
-
         snprintf(
             userMessage, sizeUserMessage,
             "Driver hardware error (P%2.2d01 = 13). Please call the support.",
             axisNo_);
-        status = setStringParam(pC_->motorMessageText(), userMessage);
-        if (status != asynSuccess) {
-            return pC_->paramLibAccessFailed(status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
-
-        status = asynError;
+        setAxisParamChecked(this, motorMessageText, userMessage);
         break;
     case 14:
         // EPICS should already prevent this issue in the first place,
         // since it contains the user limits
-
         if (pC_->getMsgPrintControl().shouldBePrinted(keyError, true,
                                                       pC_->pasynUser())) {
             asynPrint(pC_->pasynUser(), ASYN_TRACE_ERROR,
@@ -878,20 +708,11 @@ asynStatus turboPmacAxis::handleError(int error, char *userMessage,
                       pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
                       axisNo_, error, pC_->getMsgPrintControl().getSuffix());
         }
-        resetError = false;
-
         snprintf(userMessage, sizeUserMessage,
                  "Move command exceeds hardware limits (P%2.2d01 = %d). Please "
                  "call the support.",
                  axisNo_, error);
-        status = setStringParam(pC_->motorMessageText(), userMessage);
-        if (status != asynSuccess) {
-            return pC_->paramLibAccessFailed(status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
-
-        status = asynError;
+        setAxisParamChecked(this, motorMessageText, userMessage);
         break;
     default:
 
@@ -904,23 +725,11 @@ asynStatus turboPmacAxis::handleError(int error, char *userMessage,
                 pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__, axisNo_,
                 error, pC_->getMsgPrintControl().getSuffix());
         }
-        resetError = false;
-
-        snprintf(userMessage, sizeUserMessage,
-                 "Unknown error P%2.2d01 = %d. Please call the support.",
-                 axisNo_, error);
-        status = setStringParam(pC_->motorMessageText(), userMessage);
-        if (status != asynSuccess) {
-            return pC_->paramLibAccessFailed(status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
-
-        status = asynError;
+        setAxisParamChecked(this, motorMessageText, userMessage);
         break;
     }
 
-    if (resetError) {
+    if (status == asynSuccess) {
         pC_->getMsgPrintControl().resetCount(keyError, pC_->pasynUser());
     }
     return status;
@@ -931,10 +740,7 @@ asynStatus turboPmacAxis::doMove(double position, int relative,
                                  double acceleration) {
 
     // Status of read-write-operations of ASCII commands to the controller
-    asynStatus rw_status = asynSuccess;
-
-    // Status of parameter library operations
-    asynStatus pl_status = asynSuccess;
+    asynStatus status = asynSuccess;
 
     char command[pC_->MAXBUF_] = {0};
     char response[pC_->MAXBUF_] = {0};
@@ -947,19 +753,8 @@ asynStatus turboPmacAxis::doMove(double position, int relative,
 
     // =========================================================================
 
-    pl_status = pC_->getIntegerParam(axisNo_, pC_->motorEnableRBV(), &enabled);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "enableMotorRBV_", axisNo_,
-                                         __PRETTY_FUNCTION__, __LINE__);
-    }
-
-    pl_status = pC_->getDoubleParam(axisNo_, pC_->motorRecResolution(),
-                                    &motorRecResolution);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "motorRecResolution_",
-                                         axisNo_, __PRETTY_FUNCTION__,
-                                         __LINE__);
-    }
+    getAxisParamChecked(this, motorEnableRBV, &enabled);
+    getAxisParamChecked(this, motorRecResolution, &motorRecResolution);
 
     if (enabled == 0) {
         asynPrint(
@@ -979,13 +774,7 @@ asynStatus turboPmacAxis::doMove(double position, int relative,
               pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__, position);
 
     // Check if the speed is allowed to be changed
-    pl_status = pC_->getIntegerParam(axisNo_, pC_->motorCanSetSpeed(),
-                                     &motorCanSetSpeed);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "motorCanSetSpeed_",
-                                         axisNo_, __PRETTY_FUNCTION__,
-                                         __LINE__);
-    }
+    getAxisParamChecked(this, motorCanSetSpeed, &motorCanSetSpeed);
 
     // Prepend the new motor speed, if the user is allowed to set the speed.
     // Mind the " " (space) before the closing "", as the command created here
@@ -1015,8 +804,8 @@ asynStatus turboPmacAxis::doMove(double position, int relative,
     }
 
     // We don't expect an answer
-    rw_status = pC_->writeRead(axisNo_, command, response, 0);
-    if (rw_status != asynSuccess) {
+    status = pC_->writeRead(axisNo_, command, response, 0);
+    if (status != asynSuccess) {
 
         asynPrint(
             pC_->pasynUser(), ASYN_TRACE_ERROR,
@@ -1024,13 +813,8 @@ asynStatus turboPmacAxis::doMove(double position, int relative,
             "target position %lf failed.\n",
             pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
             motorCoordinatesPosition);
-        pl_status = setIntegerParam(pC_->motorStatusProblem(), true);
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(pl_status, "motorStatusProblem_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
-        return rw_status;
+        setAxisParamChecked(this, motorStatusProblem, true);
+        return status;
     }
 
     // In the next poll, we will check if the handshake has been performed in a
@@ -1044,16 +828,13 @@ asynStatus turboPmacAxis::doMove(double position, int relative,
         return asynError;
     }
 
-    return rw_status;
+    return status;
 }
 
 asynStatus turboPmacAxis::stop(double acceleration) {
 
     // Status of read-write-operations of ASCII commands to the controller
-    asynStatus rw_status = asynSuccess;
-
-    // Status of parameter library operations
-    asynStatus pl_status = asynSuccess;
+    asynStatus status = asynSuccess;
 
     char command[pC_->MAXBUF_] = {0};
     char response[pC_->MAXBUF_] = {0};
@@ -1061,37 +842,28 @@ asynStatus turboPmacAxis::stop(double acceleration) {
     // =========================================================================
 
     snprintf(command, sizeof(command), "M%2.2d=8", axisNo_);
-    rw_status = pC_->writeRead(axisNo_, command, response, 0);
+    status = pC_->writeRead(axisNo_, command, response, 0);
 
-    if (rw_status != asynSuccess) {
+    if (status != asynSuccess) {
         asynPrint(
             pC_->pasynUser(), ASYN_TRACE_ERROR,
             "Controller \"%s\", axis %d  => %s, line %d\nStopping the movement "
             "failed.\n",
             pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__);
-
-        pl_status = setIntegerParam(pC_->motorStatusProblem(), true);
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(pl_status, "motorStatusProblem_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
+        setAxisParamChecked(this, motorStatusProblem, true);
     }
 
     // Reset the driver to idle state and move out of the handshake wait loop,
     // if we're currently inside it.
     pTurboPmacA_->waitForHandshake = false;
 
-    return rw_status;
+    return status;
 }
 
 asynStatus turboPmacAxis::doReset() {
 
     // Status of read-write-operations of ASCII commands to the controller
-    asynStatus rw_status = asynSuccess;
-
-    // Status of parameter library operations
-    asynStatus pl_status = asynSuccess;
+    asynStatus status = asynSuccess;
 
     char command[pC_->MAXBUF_] = {0};
     char response[pC_->MAXBUF_] = {0};
@@ -1100,27 +872,21 @@ asynStatus turboPmacAxis::doReset() {
 
     // Reset the error for this axis manually
     snprintf(command, sizeof(command), "P%2.2d01=0", axisNo_);
-    rw_status = pC_->writeRead(axisNo_, command, response, 0);
+    status = pC_->writeRead(axisNo_, command, response, 0);
 
-    if (rw_status != asynSuccess) {
+    if (status != asynSuccess) {
         asynPrint(pC_->pasynUser(), ASYN_TRACE_ERROR,
                   "Controller \"%s\", axis %d  => %s, line %d\nResetting the "
                   "error failed\n",
                   pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__);
-
-        pl_status = setIntegerParam(pC_->motorStatusProblem(), true);
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(pl_status, "motorStatusProblem_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
+        setAxisParamChecked(this, motorStatusProblem, true);
     }
 
     // Reset the driver to idle state and move out of the handshake wait loop,
     // if we're currently inside it.
     pTurboPmacA_->waitForHandshake = false;
 
-    return rw_status;
+    return status;
 }
 
 /*
@@ -1130,38 +896,25 @@ asynStatus turboPmacAxis::doHome(double min_velocity, double max_velocity,
                                  double acceleration, int forwards) {
 
     // Status of read-write-operations of ASCII commands to the controller
-    asynStatus rw_status = asynSuccess;
-
-    // Status of parameter library operations
-    asynStatus pl_status = asynSuccess;
+    asynStatus status = asynSuccess;
 
     char command[pC_->MAXBUF_] = {0};
     char response[pC_->MAXBUF_] = {0};
 
     // =========================================================================
 
-    pl_status = pC_->getStringParam(axisNo_, pC_->encoderType(),
-                                    sizeof(response), response);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "encoderType_", axisNo_,
-                                         __PRETTY_FUNCTION__, __LINE__);
-    }
+    getAxisParamChecked(this, encoderType, &response);
 
     // Only send the home command if the axis has an incremental encoder
     if (strcmp(response, IncrementalEncoder) == 0) {
 
         snprintf(command, sizeof(command), "M%2.2d=9", axisNo_);
-        rw_status = pC_->writeRead(axisNo_, command, response, 0);
-        if (rw_status != asynSuccess) {
-            return rw_status;
+        status = pC_->writeRead(axisNo_, command, response, 0);
+        if (status != asynSuccess) {
+            return status;
         }
 
-        pl_status = setIntegerParam(pC_->motorMoveToHome(), 1);
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(pl_status, "motorMoveToHome_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
+        setAxisParamChecked(this, motorMoveToHome, true);
         return callParamCallbacks();
     }
 
@@ -1174,10 +927,7 @@ Read the encoder type and update the parameter library accordingly
 asynStatus turboPmacAxis::readEncoderType() {
 
     // Status of read-write-operations of ASCII commands to the controller
-    asynStatus rw_status = asynSuccess;
-
-    // Status of parameter library operations
-    asynStatus pl_status = asynSuccess;
+    asynStatus status = asynSuccess;
 
     char command[pC_->MAXBUF_] = {0};
     char response[pC_->MAXBUF_] = {0};
@@ -1188,9 +938,9 @@ asynStatus turboPmacAxis::readEncoderType() {
 
     // Check if this is an absolute encoder
     snprintf(command, sizeof(command), "I%2.2d04", axisNo_);
-    rw_status = pC_->writeRead(axisNo_, command, response, 1);
-    if (rw_status != asynSuccess) {
-        return rw_status;
+    status = pC_->writeRead(axisNo_, command, response, 1);
+    if (status != asynSuccess) {
+        return status;
     }
 
     int reponse_length = strlen(response);
@@ -1208,22 +958,17 @@ asynStatus turboPmacAxis::readEncoderType() {
     }
 
     snprintf(command, sizeof(command), "P46");
-    rw_status = pC_->writeRead(axisNo_, command, response, 1);
-    if (rw_status != asynSuccess) {
-        return rw_status;
+    status = pC_->writeRead(axisNo_, command, response, 1);
+    if (status != asynSuccess) {
+        return status;
     }
     int number_of_axes = strtol(response, NULL, 10);
 
     // If true, the encoder is incremental
     if (encoder_id <= number_of_axes) {
-        pl_status = setStringParam(pC_->encoderType(), IncrementalEncoder);
+        setAxisParamChecked(this, encoderType, IncrementalEncoder);
     } else {
-        pl_status = setStringParam(pC_->encoderType(), AbsoluteEncoder);
-    }
-
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "encoderType_", axisNo_,
-                                         __PRETTY_FUNCTION__, __LINE__);
+        setAxisParamChecked(this, encoderType, AbsoluteEncoder);
     }
     return asynSuccess;
 }
@@ -1243,24 +988,16 @@ asynStatus turboPmacAxis::rereadEncoder() {
     char encoderType[pC_->MAXBUF_] = {0};
 
     // Status of read-write-operations of ASCII commands to the controller
-    asynStatus rw_status = asynSuccess;
-
-    // Status of parameter library operations
-    asynStatus pl_status = asynSuccess;
+    asynStatus status = asynSuccess;
 
     // =========================================================================
 
     // Check if this is an absolute encoder
-    rw_status = readEncoderType();
-    if (rw_status != asynSuccess) {
-        return rw_status;
-    }
-    pl_status = pC_->getStringParam(axisNo_, pC_->encoderType(),
-                                    sizeof(encoderType), encoderType);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "encoderType_", axisNo_,
-                                         __PRETTY_FUNCTION__, __LINE__);
+    status = readEncoderType();
+    if (status != asynSuccess) {
+        return status;
     }
+    getAxisParamChecked(this, encoderType, &encoderType);
 
     // Abort if the axis is incremental
     if (strcmp(encoderType, IncrementalEncoder) == 0) {
@@ -1274,25 +1011,16 @@ asynStatus turboPmacAxis::rereadEncoder() {
     // Check if the axis is disabled. If not, inform the user that this
     // is necessary
     int enabled = 0;
-    pl_status = pC_->getIntegerParam(axisNo_, pC_->motorEnableRBV(), &enabled);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "enableMotorRBV_", axisNo_,
-                                         __PRETTY_FUNCTION__, __LINE__);
-    }
+    getAxisParamChecked(this, motorEnableRBV, &enabled);
 
     if (enabled == 1) {
         asynPrint(pC_->pasynUser(), ASYN_TRACE_WARNING,
                   "Controller \"%s\", axis %d  => %s, line %d\nAxis must be "
                   "disabled before rereading the encoder.\n",
                   pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__);
-        pl_status = setStringParam(
-            pC_->motorMessageText(),
+        setAxisParamChecked(
+            this, motorMessageText,
             "Axis must be disabled before rereading the encoder.");
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(pl_status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
         return asynError;
     } else {
         snprintf(command, sizeof(command), "M%2.2d=15", axisNo_);
@@ -1309,15 +1037,9 @@ asynStatus turboPmacAxis::rereadEncoder() {
     // it is actually finished, so we instead wait for 0.5 seconds.
     usleep(500000);
 
-    // turn off parameter as finished rereading
-    // this will only be immediately noticed in the read back variable
-    // though
-    pl_status = pC_->setIntegerParam(pC_->rereadEncoderPosition(), 0);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "rereadEncoderPosition_",
-                                         axisNo_, __PRETTY_FUNCTION__,
-                                         __LINE__);
-    }
+    // Turn off parameter as finished rereading, this will only be immediately
+    // noticed in the read back variable though
+    setAxisParamChecked(this, rereadEncoderPosition, false);
     return asynSuccess;
 }
 
@@ -1329,10 +1051,7 @@ asynStatus turboPmacAxis::enable(bool on) {
     int nvals = 0;
 
     // Status of read-write-operations of ASCII commands to the controller
-    asynStatus rw_status = asynSuccess;
-
-    // Status of parameter library operations
-    asynStatus pl_status = asynSuccess;
+    asynStatus status = asynSuccess;
 
     // =========================================================================
 
@@ -1359,15 +1078,8 @@ asynStatus turboPmacAxis::enable(bool on) {
                   "idle and can therefore not be enabled / disabled.\n",
                   pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__);
 
-        pl_status =
-            setStringParam(pC_->motorMessageText(),
-                           "Axis cannot be disabled while it is moving.");
-        if (pl_status != asynSuccess) {
-            return pC_->paramLibAccessFailed(pl_status, "motorMessageText_",
-                                             axisNo_, __PRETTY_FUNCTION__,
-                                             __LINE__);
-        }
-
+        setAxisParamChecked(this, motorMessageText,
+                            "Axis cannot be disabled while it is moving.");
         return asynError;
     }
 
@@ -1384,9 +1096,9 @@ asynStatus turboPmacAxis::enable(bool on) {
 
     // Reread the encoder, if the axis is going to be enabled
     if (on != 0) {
-        rw_status = rereadEncoder();
-        if (rw_status != asynSuccess) {
-            return rw_status;
+        status = rereadEncoder();
+        if (status != asynSuccess) {
+            return status;
         }
     }
 
@@ -1397,9 +1109,9 @@ asynStatus turboPmacAxis::enable(bool on) {
               pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
               on ? "Enable" : "Disable");
 
-    rw_status = pC_->writeRead(axisNo_, command, response, 0);
-    if (rw_status != asynSuccess) {
-        return rw_status;
+    status = pC_->writeRead(axisNo_, command, response, 0);
+    if (status != asynSuccess) {
+        return status;
     }
 
     // Query the axis status every few milliseconds until the axis has been
@@ -1410,9 +1122,9 @@ asynStatus turboPmacAxis::enable(bool on) {
 
         // Read the axis status
         usleep(100000);
-        rw_status = pC_->writeRead(axisNo_, command, response, 1);
-        if (rw_status != asynSuccess) {
-            return rw_status;
+        status = pC_->writeRead(axisNo_, command, response, 1);
+        if (status != asynSuccess) {
+            return status;
         }
         nvals = sscanf(response, "%d", &pTurboPmacA_->axisStatus);
         if (nvals != 1) {
@@ -1439,12 +1151,7 @@ asynStatus turboPmacAxis::enable(bool on) {
     // Output message to user
     snprintf(command, sizeof(command), "Failed to %s within %d seconds",
              on ? "enable" : "disable", timeout_enable_disable);
-    pl_status = setStringParam(pC_->motorMessageText(), command);
-    if (pl_status != asynSuccess) {
-        return pC_->paramLibAccessFailed(pl_status, "motorMessageText_",
-                                         axisNo_, __PRETTY_FUNCTION__,
-                                         __LINE__);
-    }
+    setAxisParamChecked(this, motorMessageText, command);
     return asynError;
 }
 

src/turboPmacAxis.h

@@ -1,15 +1,11 @@
 #ifndef turboPmacAXIS_H
 #define turboPmacAXIS_H
-#include "sinqAxis.h"
+#include "sinqController.h"
+#include "turboPmacController.h"
 #include <memory>
 
 struct turboPmacAxisImpl;
 
-// Forward declaration of the controller class to resolve the cyclic dependency
-// between the controller and the axis .h-file. See
-// https://en.cppreference.com/w/cpp/language/class.
-class turboPmacController;
-
 class turboPmacAxis : public sinqAxis {
   public:
     /**
@@ -142,6 +138,11 @@ class turboPmacAxis : public sinqAxis {
      */
     void setNeedInit(bool needInit);
 
+    /**
+     * @brief Return a pointer to the axis controller
+     */
+    virtual turboPmacController *pController() override { return pC_; };
+
   private:
     turboPmacController *pC_;
     std::unique_ptr<turboPmacAxisImpl> pTurboPmacA_;

src/turboPmacController.cpp

@@ -206,7 +206,6 @@ asynStatus turboPmacController::writeRead(int axisNo, const char *command,
 
     // Definition of local variables.
     asynStatus status = asynSuccess;
-    asynStatus paramLibStatus = asynSuccess;
     asynStatus timeoutStatus = asynSuccess;
     // char fullCommand[MAXBUF_] = {0};
     char drvMessageText[MAXBUF_] = {0};
@@ -428,41 +427,18 @@ asynStatus turboPmacController::writeRead(int axisNo, const char *command,
 
     // Log the overall status (communication successfull or not)
     if (status == asynSuccess) {
-        paramLibStatus = axis->setIntegerParam(this->motorStatusCommsError_, 0);
+        setAxisParamChecked(axis, motorStatusCommsError, false);
     } else {
         // Check if the axis already is in an error communication mode. If
         // it is not, upstream the error. This is done to avoid "flooding"
         // the user with different error messages if more than one error
         // ocurred before an error-free communication
-        paramLibStatus =
-            getIntegerParam(axisNo, motorStatusProblem_, &motorStatusProblem);
-        if (paramLibStatus != asynSuccess) {
-            return paramLibAccessFailed(paramLibStatus, "motorStatusProblem",
-                                        axisNo, __PRETTY_FUNCTION__, __LINE__);
-        }
+        getAxisParamChecked(axis, motorStatusProblem, &motorStatusProblem);
 
         if (motorStatusProblem == 0) {
-            paramLibStatus =
-                axis->setStringParam(motorMessageText(), drvMessageText);
-            if (paramLibStatus != asynSuccess) {
-                return paramLibAccessFailed(paramLibStatus, "motorMessageText",
-                                            axisNo, __PRETTY_FUNCTION__,
-                                            __LINE__);
-            }
-
-            paramLibStatus = axis->setIntegerParam(motorStatusProblem_, 1);
-            if (paramLibStatus != asynSuccess) {
-                return paramLibAccessFailed(paramLibStatus,
-                                            "motorStatusProblem", axisNo,
-                                            __PRETTY_FUNCTION__, __LINE__);
-            }
-
-            paramLibStatus = axis->setIntegerParam(motorStatusProblem_, 1);
-            if (paramLibStatus != asynSuccess) {
-                return paramLibAccessFailed(paramLibStatus,
-                                            "motorStatusCommsError", axisNo,
-                                            __PRETTY_FUNCTION__, __LINE__);
-            }
+            setAxisParamChecked(axis, motorMessageText, drvMessageText);
+            setAxisParamChecked(axis, motorStatusProblem, true);
+            setAxisParamChecked(axis, motorStatusCommsError, true);
         }
     }
     return status;

src/turboPmacController.h

@@ -10,9 +10,13 @@
 #define turboPmacController_H
 #include "sinqAxis.h"
 #include "sinqController.h"
-#include "turboPmacAxis.h"
 #include <memory>
 
+// Forward declaration of the controller class to resolve the cyclic dependency
+// between the controller and the axis .h-file. See
+// https://en.cppreference.com/w/cpp/language/class.
+class turboPmacAxis;
+
 struct turboPmacControllerImpl;
 
 class turboPmacController : public sinqController {