d44dbaaf0f
clang is too old
2024-10-10 13:19:59 +02:00
501c5badea
ran formatter
2024-09-30 17:12:30 +02:00
39098fd0d1
Adds .clang-format style for formatting files
2024-09-25 16:21:01 +02:00
1539bfc66a
bugfix: don't need to run on initialisation
2024-09-23 09:04:08 +02:00
d88e5877a7
Bugfix: A disabled PMac is no longer consider moving
2024-09-18 10:57:57 +02:00
118e177e04
Bugfix: A disabled PMac is no longer consider moving
2024-09-18 10:48:59 +02:00
f61daf0b49
just adds some warnings for potentially incorrect code
2024-09-11 15:07:25 +02:00
6dbd0fc0d7
Merge branch 'SINQSW-86-read-after-motor-reconnection' into 'master'
...
SINQSW-86 fix build error
See merge request sinqdev/sinqepicsapp!2
2024-09-10 09:21:15 +02:00
e657ea675c
SINQSW-86 fix build error
2024-09-10 09:21:15 +02:00
5c0c917be9
Merge branch 'initializer_for_EL734Axis' into 'master'
...
Girder axis and initializer EL734Axis
See merge request sinqdev/sinqepicsapp!3
2024-09-10 09:19:24 +02:00
35c12274b0
Merge branch 'master' into 'initializer_for_EL734Axis'
...
# Conflicts:
# sinqEPICSApp/src/EL734Driver.cpp
2024-09-10 09:19:06 +02:00
a6a8f14b26
The member variable oredMSR of EL734Axis contains the axis status from the previous poll.
...
Therefore, it needs to initialized with a sensible value (i.e. 1 which
means that the axis is standing still and has no errors.
2024-09-10 08:58:59 +02:00
33f118ce1e
Fixed type in pmacController.cpp
2024-08-20 11:14:18 +02:00
adf8b30692
Minor changes to SINQ drivers:
...
- Fixed enable/disable at MasterMACS
2024-08-20 11:12:18 +02:00
c972cce072
Added girder translation axis drivers
2024-07-18 13:43:12 +02:00
64c8b08ce4
Fixed an initialisation bug in EL734Driver which prevented motors from
...
being polled. The value in question was next_poll which is now set to -1
in the constructor.
2024-06-07 13:36:34 +02:00
30228adf50
- Fixed a enable PV initialisation bug in MasterMACS
...
- Made the HRPT axis base itself on V3 of the pmacAxis
- Improved and added utils programs
2024-06-07 08:58:53 +02:00
d9d6dae19f
Updated the sync utilities
2024-05-23 16:00:32 +02:00
32a8c27dbf
Merge branch 'speed'
2024-02-23 11:34:26 +01:00
235e403fb3
- Added Makefile.RHEL8 for RHEL8
...
- Added a interMessagePeriod to SINQController, pmacController and MasterMACSController. Also a iocsh command to modify this at runtime
2024-02-23 11:30:46 +01:00
b4e201ae86
Final version of the SINQ EPICS module for RHEL7 in 2023
...
- Fixes to MasterMACS, mostly.
- Minor changes
2024-01-11 14:05:49 +01:00
9422353107
Alex: Committing Mark's fixes to el737 devsup
2023-09-12 16:43:24 +02:00
e3ac2962f5
- Many improvements to the MasterMACS driver
...
- Slowing down the pmac driver
- Fixing a bug in the Nanotec driver which caused an IOC crash when the
motor sends bad data
2023-08-28 15:01:48 +02:00
7a81e2c5a0
Reduced output from MasterMacsDriver
2023-07-13 10:57:07 +02:00
f1a17bc295
Added AMOR detector tower special pmac motors: working now
2023-07-07 13:54:21 +02:00
8a6441927a
Implemented that enable commands are only sent when a status chnage is required
...
Stop commands are only sent by EL734 and pmac when actually moving. The
motor record logic calls stop() in an excessive way.
2023-05-31 09:37:22 +02:00
72afd02b4e
Many improvements to the MasterMACS motor driver. It is working but the hardware is shaky.
...
Added support for dose rate controlled Phytron motors. Not tested!
Small bug fixes
2023-05-31 09:13:41 +02:00
f333a27482
Added missing file after merging MasterMACS
2023-03-21 15:05:25 +01:00
4a2731b054
Added yet another missing file
2023-03-21 14:58:21 +01:00
9055a86b57
Added two missing files
2023-03-21 14:56:38 +01:00
ccd73babd5
First working version of the MasterMACS EPICS driver
...
Also added some test code
2023-03-21 14:55:07 +01:00
b8896b7a85
Implemented speed for the PMAC controller
2023-02-22 11:54:54 +01:00
acf1751081
Merge branch 'master' into speed
2023-02-17 10:46:06 +01:00
61290b5e2c
Added utility programs which update motor subsitutions files from
...
the values read rom the actual controller
2023-02-17 10:45:15 +01:00
d706915a46
Implemented changing speed on EL734
...
Added a test IOCs for EL734
2023-02-17 10:43:51 +01:00
3c9932dc18
- Reduced poll rate of EL737
...
- Removed unneeded hardware limit reading code from EL734
2023-02-16 14:29:05 +01:00
9b9072b83b
Improved error handling in the EL737 scalerRecord driver
2023-01-31 11:42:04 +01:00
3b2a21094c
Fixed pmacV3 axis codes
2023-01-12 15:16:49 +01:00
a899a28182
sMore debugging output in devScalerEL737
2023-01-11 15:09:43 +01:00
0cbfe45893
Fixed ErormoveDriver to stop only on end switches when the target
...
exceeds the limits. Otherwise motors would get stuck on the switches
when trying to move off them.
2022-08-16 10:54:10 +02:00
bb1c10c7cd
EL737 Increase timeout
...
The EL737 module micht give rise to a failure if the counterbox
does not reply withing 1s. This is the case at FOCUS.
With this commit the timeout is increased to 2s.
2022-07-21 13:42:31 +02:00
339da2e9ff
PMAC V3: axis status 5,6 not a failure
...
The old implementation assumes that the axis staying in state 5,6
for too much time a implies a failure. This is no longer the case.
2022-07-21 13:37:32 +02:00
80877aa6ab
pmacV3 read speed and evaluate ETA
2022-05-27 15:21:46 +02:00
afc92bde3f
Improved status reporting
2022-05-20 10:38:32 +02:00
8e2c1af10e
Some cleanup, force reload encoder before enable
2022-05-20 08:35:42 +00:00
f5da0d54bd
Reduce polling, se MsgTxt if move when disabled
2022-05-20 08:35:42 +00:00
ad05433602
Bugfix + cleanup
2022-05-20 08:35:42 +00:00
92364a1de8
Can set and read enable, something broken with movements and status
2022-05-20 08:35:42 +00:00
403eecafae
pmac Enable PV successfully tested
2022-05-20 08:35:42 +00:00
fbf2331a05
pmacV3 read axis state
2022-05-20 08:35:42 +00:00
