Removed debug messages

.gitmodules

@@ -0,0 +1,3 @@
+[submodule "turboPmac"]
+	path = turboPmac
+	url = https://gitea.psi.ch/lin-epics-modules/turboPmac

Makefile

@@ -12,9 +12,6 @@ REQUIRED+=motorBase
 # Specify the version of motorBase we want to build against
 motorBase_VERSION=7.2.2
 
-# Specify the version of turboPmac we want to build against
-turboPmac_VERSION=0.13.0
-
 # These headers allow to depend on this library for derived drivers.
 HEADERS += src/seleneGuideController.h
 HEADERS += src/seleneLiftAxis.h
@@ -22,15 +19,27 @@ HEADERS += src/seleneAngleAxis.h
 HEADERS += src/seleneOffsetAxis.h
 
 # Source files to build
+SOURCES += turboPmac/sinqMotor/src/msgPrintControl.cpp
+SOURCES += turboPmac/sinqMotor/src/sinqAxis.cpp
+SOURCES += turboPmac/sinqMotor/src/sinqController.cpp
+SOURCES += turboPmac/src/pmacAsynIPPort.c
+SOURCES += turboPmac/src/turboPmacAxis.cpp
+SOURCES += turboPmac/src/turboPmacController.cpp
+SOURCES += turboPmac/src/pmacAsynIPPort.c
 SOURCES += src/seleneGuideController.cpp
 SOURCES += src/seleneLiftAxis.cpp
 SOURCES += src/seleneAngleAxis.cpp 
 SOURCES += src/seleneOffsetAxis.cpp
 
 # Store the record files
+TEMPLATES += turboPmac/sinqMotor/db/asynRecord.db
+TEMPLATES += turboPmac/sinqMotor/db/sinqMotor.db
+TEMPLATES += turboPmac/db/turboPmac.db
 TEMPLATES += db/seleneGuide.db
 
 # This file registers the motor-specific functions in the IOC shell.
+DBDS += turboPmac/sinqMotor/src/sinqMotor.dbd
+DBDS += turboPmac/src/turboPmac.dbd
 DBDS += src/seleneGuide.dbd
 
 USR_CFLAGS += -Wall -Wextra -Weffc++ -Wunused-result -Wextra -Werror # -Wpedantic // Does not work because EPICS macros trigger warnings

README.md

@@ -90,13 +90,13 @@ seleneVirtualAxes("$(NAME)", 1, 2, 3, 4, 5, 6, 9, 10);
 # Parametrize the EPICS record database with the substitution file named after the motor controller.
 # In order to provide the PVs for absolute position and normalization, the 
 # corresponding `seleneGuide.db` file is loaded here as well.
-epicsEnvSet("SINQDBPATH","$(sinqMotor_DB)/sinqMotor.db")
+epicsEnvSet("SINQDBPATH","$(seleneGuide_DB)/sinqMotor.db")
 dbLoadTemplate("$(TOP)/motors/$(NAME).substitutions", "INSTR=$(INSTR)$(NAME):,CONTROLLER=$(NAME)")
-epicsEnvSet("SINQDBPATH","$(turboPmac_DB)/turboPmac.db")
+epicsEnvSet("SINQDBPATH","$(seleneGuide_DB)/turboPmac.db")
 dbLoadTemplate("$(TOP)/motors/$(NAME).substitutions", "INSTR=$(INSTR)$(NAME):,CONTROLLER=$(NAME)")
 epicsEnvSet("SINQDBPATH","$(seleneGuide_DB)/seleneGuide.db")
 dbLoadTemplate("$(TOP)/motors/$(NAME).substitutions", "INSTR=$(INSTR)$(NAME):,CONTROLLER=$(NAME)")
-dbLoadRecords("$(sinqMotor_DB)/asynRecord.db","P=$(INSTR)$(NAME),PORT=$(ASYN_PORT)")
+dbLoadRecords("$(seleneGuide_DB)/asynRecord.db","P=$(INSTR)$(NAME),PORT=$(ASYN_PORT)")
 ```
 
 ### Substitution file

src/seleneAngleAxis.cpp

@@ -22,6 +22,20 @@ seleneAngleAxis::seleneAngleAxis(seleneGuideController *pController, int axisNo,
         pC_->paramLibAccessFailed(status, "motorCanDisable", axisNo_,
                                   __PRETTY_FUNCTION__, __LINE__);
     }
+
+    // Even though this happens already in sinqAxis, a default value for
+    // motorMessageText is set here again, because apparently the sinqAxis
+    // constructor is not run before the string is accessed?
+    status = setStringParam(pC_->motorMessageText(), "");
+    if (status != asynSuccess) {
+        asynPrint(pC_->pasynUser(), ASYN_TRACE_ERROR,
+                  "Controller \"%s\", axis %d => %s, line %d:\nFATAL ERROR "
+                  "(setting a parameter value failed "
+                  "with %s)\n. Terminating IOC",
+                  pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
+                  pC_->stringifyAsynStatus(status));
+        exit(-1);
+    }
 }
 
 asynStatus seleneAngleAxis::stop(double acceleration) {
@@ -59,7 +73,7 @@ asynStatus seleneAngleAxis::targetPosition(double *targetPosition) {
 
 asynStatus seleneAngleAxis::doPoll(bool *moving) {
 
-    char userMessage[pC_->MAXBUF_] = {0};
+    char errorMessage[pC_->MAXBUF_] = {0};
 
     // In the doPoll method of `seleneLiftAxis`, the parameters
     // `motorStatusMoving` and `motorStatusDone` of this axis have already been
@@ -189,15 +203,15 @@ asynStatus seleneAngleAxis::doPoll(bool *moving) {
     // axis.
     pl_status =
         pC_->getStringParam(liftAxis_->axisNo(), pC_->motorMessageText(),
-                            sizeof(userMessage), userMessage);
+                            sizeof(errorMessage), errorMessage);
     if (pl_status != asynSuccess) {
         return pC_->paramLibAccessFailed(pl_status, "motorMessageText",
                                          liftAxis_->axisNo(),
                                          __PRETTY_FUNCTION__, __LINE__);
     }
 
-    if (strlen(userMessage) != 0) {
-        pl_status = setStringParam(pC_->motorMessageText(), userMessage);
+    if (strlen(errorMessage) != 0) {
+        pl_status = setStringParam(pC_->motorMessageText(), errorMessage);
         if (pl_status != asynSuccess) {
             return pC_->paramLibAccessFailed(pl_status, "motorMessageText_",
                                              axisNo_, __PRETTY_FUNCTION__,

src/seleneLiftAxis.cpp

@@ -99,6 +99,20 @@ seleneLiftAxis::seleneLiftAxis(seleneGuideController *pC, int axis1No,
         pC_->paramLibAccessFailed(status, "motorCanDisable", axisNo_,
                                   __PRETTY_FUNCTION__, __LINE__);
     }
+
+    // Even though this happens already in sinqAxis, a default value for
+    // motorMessageText is set here again, because apparently the sinqAxis
+    // constructor is not run before the string is accessed?
+    status = setStringParam(pC_->motorMessageText(), "");
+    if (status != asynSuccess) {
+        asynPrint(pC_->pasynUser(), ASYN_TRACE_ERROR,
+                  "Controller \"%s\", axis %d => %s, line %d:\nFATAL ERROR "
+                  "(setting a parameter value failed "
+                  "with %s)\n. Terminating IOC",
+                  pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
+                  pC_->stringifyAsynStatus(status));
+        exit(-1);
+    }
 }
 
 asynStatus seleneLiftAxis::init() {
@@ -493,10 +507,6 @@ asynStatus seleneLiftAxis::startCombinedMove() {
     if (status != asynSuccess) {
         return status;
     }
-
-    errlogPrintf("Target lift: %lf, Target angle: %lf\n", liftTargetPosition,
-                 angleTargetPosition);
-
     auto targetPositions =
         positionsFromLiftAndAngle(liftTargetPosition, angleTargetPosition);
 
@@ -516,8 +526,6 @@ asynStatus seleneLiftAxis::startCombinedMove() {
              targetPositions[0], targetPositions[1], targetPositions[2],
              targetPositions[3], targetPositions[4], targetPositions[5]);
 
-    errlogPrintf("%s\n", command);
-
     // No answer expected
     return pC_->writeRead(axisNo_, command, response, 0);
 }

src/seleneOffsetAxis.cpp

@@ -80,6 +80,20 @@ seleneOffsetAxis::seleneOffsetAxis(seleneGuideController *pController,
         pC_->paramLibAccessFailed(status, "motorCanDisable", axisNo_,
                                   __PRETTY_FUNCTION__, __LINE__);
     }
+
+    // Even though this happens already in sinqAxis, a default value for
+    // motorMessageText is set here again, because apparently the sinqAxis
+    // constructor is not run before the string is accessed?
+    status = setStringParam(pC_->motorMessageText(), "");
+    if (status != asynSuccess) {
+        asynPrint(pC_->pasynUser(), ASYN_TRACE_ERROR,
+                  "Controller \"%s\", axis %d => %s, line %d:\nFATAL ERROR "
+                  "(setting a parameter value failed "
+                  "with %s)\n. Terminating IOC",
+                  pC_->portName, axisNo_, __PRETTY_FUNCTION__, __LINE__,
+                  pC_->stringifyAsynStatus(status));
+        exit(-1);
+    }
 }
 
 asynStatus seleneOffsetAxis::init() {
@@ -199,6 +213,12 @@ asynStatus seleneOffsetAxis::doPoll(bool *moving) {
 
     // Update the parameter library
     if (error != 0) {
+        status = setStringParam(pC_->motorMessageText(), userMessage);
+        if (status != asynSuccess) {
+            return pC_->paramLibAccessFailed(status, "motorMessageText",
+                                             axisNo_, __PRETTY_FUNCTION__,
+                                             __LINE__);
+        }
         status = setIntegerParam(pC_->motorStatusProblem(), true);
         if (status != asynSuccess) {
             return pC_->paramLibAccessFailed(status, "motorStatusProblem_",