* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* connected kernelversion, hardwareversion, versions, framesl, triggersl, dr, timingmode, pattern (except patioctrl) thats there for altera ctb
* replaced set/get64Bit to set/getU64bit in all loadpattern.c for (ctb and m3 also)
* implemented testbus, testfpga, set/get #frames, triggers, allowed that and for connection to client, also allowed, getnumchannels, configuremac, getrunstatus, setdetectorposition with dummy values
* allowing tests for xilinx
* binaries in
* updated registers, arm64
* compiler set to aarch64 for xilinx server
* updated RegisterDefs.h
* merge into generate branch and resolving conflicts and adding the xilinx changes to callerspecial and commands.yaml
* compiles and can print firmware version (using a different csp0 address)
* fixing other servers (gotthard, jungfrau, moench, mythen3) that it returns in case of mapping failure, xilinxctb: added that it checks type, prints proper fw version, checks kernel date, added armprocessor define to use in common places, added specifiers to supress overflow and truncation warnings
* added detector ip and mac adddress to the printout
* fixed tests and recompiled servers
* draft to fix virtual test when it fails
* catching errors in tests and removing sigchild ignore so servers (process in background) executing commands will not fail (pclose no child processes, if sigchld is ignored) fixed
* uncommented python loading config
* somehow killal slsReciever in second detector test fails even though no receiver running
* fixing script for virtual simlator test:fixed issue with check if process running, fixed moench tests
* merge fix from 7.0.2: new jungfrau fw versions, incremented binary, hdf5 and json versions
* moench: changed dac names and default values to old moench values
* moench: remove interface clk polarity at start up
* moench: default speed is half speed, default values for adc offset and adc phase for different speeds (only half speed confirmed), adc vref voltage to 2.0 like G1
* moench: connected adc pipeline to client
* moench: receiver- default frames per file is 100k and discard partial frames as default
* moench binary in
* using tostring in gui for dacs
* moved frame discard policy as a parameter to be configured with a default depending on detector
* moench: 300 degrees for adc phase in full speed
* transceiverenable, tsamples, romode for tranceiver and digital_transceiver
* 202 spec instr only for transceiver mode
* removed check for empty in trans readout and clean memory before reading from fifo
* ctb read fifo strobe for all after reading all channels, adding 1us after selecting channel, changing fw date
* updated 10gb transceiver enable
----
* added transceiver (tsamples, romode(transceiver, digital_transceiver), transceiverenable (mask)
* clean memory before reading from fifo (for analog and digital as well)
* read fifo then read strobe (also corresp fw) fixes number of reads (also for analg and digital)-> increases all pipelines by 1
* fixed bug in rearranging digital data in receiver
* fixed bug in streaming size of data after rearranging
* fixed bug in setbit, clearbit,and getbit
* status checks fifo before returning idle (transmitting if data in fifo if transceiver more enabled)
* soem matterhorn specifics that will need to be put into pattern in a month or two. this is temporary.
* NOTE: breaking api. rxParameters struct has transceiverenabel and tsamples given from det to receiver
* when dbit list is enabled, the size of data in zmq stream is changed to only the digital bits enabled size. now fixed to also include analog size
* allowing to set 0xffffffffffffffff to pat io control. prevously was used to do a get. fixed also for pat bit mask and pat mask
* moench, removed chip version, filter resistor, filter cells, currentsoures, gain mode, setttings(modes), dbitphase, maxdbitphase, autocompdisable, comparatordisabletime, made acq start and stop a pulse, removed unused registers
* added parallel command
* remove gain plot for moench
* moench: updated adc invert val
* moench: update adcoffset to 0xf and adcphase to 140 degrees
* removed sync clock in moench
* updated min fw version
* removing config file in moench server
* Revert "Ctb: allow adc mask enable to be 0 for 1 and 10GbE (#750)"
This reverts commit a0f250a4876937ebb2a96c8948fdea380625a86e.
* better error message about setting adc mask to 0. Cannot set it to 0 due to ram allocation
Firmware updated. spi moved to firmware. In Software, configuring, then a pulse to start, wait for done bit and convert the values read from a regiter.
* copied jungfrau server to moench and adapted
* fixed image size and num packets
* read n rows allows 16
* commneted out configure_asic_timer at server startup. To be removed later the ASIC_CTRL_REG and storage cell options
* moench:removing the decrement (which was in jf) in read n rows to register
* removed lblsamples from gui
- removed getClientServerAPIVersion in server (not used)
- removed rxr side (clientversion compatibility check), removed enum as well as it is now done on the client side.
- versionAPI.h
- GITBRANCH changed to RELEASE
- dates for all API changed to "sem_version date". Scripts to compile servers modified for this. Empty "branch" name will end up with developer for sem_version.
- Version class with constructor taking in the long version (APILIB date). Other member functions including concise(to get sem_version for new releases and date for old releases),
- bypassing initial tests, also now bypasses the client-rxr compatibility check (at rx_hostname command)
- previously, compatibility between client-det was ensuring both had the same detector API (eg. same APIJUNGFRAU)
- Now, compatibility only checks APILIB (client side) and detector API(eg. APIJUNGFRAU) (detector side) have same major version. It only does backward compatibility test. Rest is upto user to ensure.
- If server is from an older release, it will compare dates like previous implementation (APIJUNGFRAU from both client and det)
- - previously, compatibility between client-rxr was ensuring both had the same APIRECEIVER
- Now, compatibility only checks APILIB (client side) and APIRECEIVER (rxr side) have same major version. It only does backward compatibility test. Rest is upto user to ensure.
- If rxr is from an older release, it will compare dates like previous implementation (APIRECEIVER from both client and rxr)
- removed APIGUI, evalVersionVariables.sh, genVersionHeader.sh (not needed or not used)
- clientVersion, rxrversion and detectorserverversion all return strings and not integers (in hex) anymore. Depending if it has semantic versioning, it will print that or the date if it is too old.
- fixed in python (strings for versions)
- check_version function in detector server changed to "initial checks" as it only checks server-firmware compatibility and initial server checks. Client compatibilities are moved to client side.
- --version gives sem_version and date? Is date needed as well. The clientversion, detserverversion and rxrversion API gives only sem_version (no date)
- - formatting
* badchannels for m3 and modify for g2 (file from single and multi)
* m3: invert polarity of bit 7 and 11 signals from setmodule, allow commas in bad channel file
* badchannel file can take commas, colons and comments (also taking care of spaces at the end of channel numbers)
* tests 'badchannels' and 'Channel file reading' added, removing duplicates in badchannel list, defining macro for num counters in client side
* fix segfault when list from file is empty,
* fix tests assertion for ctbconfig (adding message) for c++11
* fixed badchannels in m3server (clocking in trimming)
* badchannel tests can be run from any folder (finds the file)
