* add patternstart command for CTB, block end of execution udp packets if pattern was started by patternstart command
* update docs
* Dhanya's comments
* more Dhanya comments
* refactored
* fixed tests for startpatttern, also clkfrequency not properly used in server
* xilinx: fixed setfrequency, tick clock (with sync clock), clkfrequency set from getfrequency to get the exact value
* xilinx freq in kHz, updated default values and prints
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
* update ctb regDefs, included fill level of adc, transceiver and DBit fifos, added enable registers for cont. readout
* fix fifo fill level range bug
* updated ctb RegDefs, increased size of fifo fill level register
* added register to read the firmware git hash
* ctb: added altchip_id read register
* start with unification of pattern machinery for xctb, ctb, mythen
* udate addrs for d-server internal matterhorn startup
* update xctb reg defs
* move pattern loopdef start
* added zero trimbits to matterhorn config
* Revert "added zero trimbits to matterhorn config"
This reverts commit 7c347badd5.
* added adjustable clocks on Xilinx-CTB
* added support for fractional dividers of runclk
* XCTB: make frequencies adjustable from python gui
* update docs
* added support for patternstart command to XCTB
* XCTB: map pattern_ram directly into memory, removed rw strobe
* refactor Mythen pattern control addresses
* test altera ctb with common addresses, removed ifdefs
* change ordering of regdefs
* updated python help for dbitclk, adcclk and runclk (khz)
* xilinx: moved the wait for firmware to measure the actual frequency to the server side and removed it in the pyctbgui side
* will not be anymore in developer branch
* make format (exception RegisterDefs.h), rewrite XILINX PLL to have less consstants in the code
* bug: mixing && for &
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
- fix acquire fail in tests (adcreg test)
- roi tests fail after overlapping invalid test and acquire after
- print udp dest mac in server properly
- fixed udp dst list get (server was not sending entry proper size to match proper struct size in client)
- updated server binaries and updated hard links in serverBin
- added documentation regarding gui: zmqport and zmqip in terms of gui, rx_zmqstream
- removed print - probably ended there for debuggung
---------
Co-authored-by: Alice <alice.mazzoleni@psi.ch>
readout speed added to json and h5 master files.
Also fixed master file inconsistencies
Sserver binaries
- update server binaries because readoutspeed needs to be sent to receiver with rx_hostname command
API
- added const to Detector class set/getburstmode
Python
- updated python bindings (burstmode const and roi arguments)
Cmd generation
- added pragma once in Caller.in.h as Caller is included in test files
m3: num channels due to #counters < 3
* workaround for m3 for messed up num channels (client always assumes all counters enabled and adds them to num channels), fix for hdf5
g2: exptime master file inconsistency
- exptime didnt match because of round of when setting burst mode (sets to a different clk divider)
- so updating actual time for all timers (exptime, period, subexptime etc, ) in Module class, get timer values from detector when setting it and then send to receiver to write in master file
ctb image size incorrect:
- write actual size into master file and not the reserved size (digital reduces depending on dbit list and dbit offset)
- added a calculate ctb image size free function in generalData.h that is used there as well as for the tests.
master file inconsistencies
- refactored master attributes writing using templates
- names changed to keep it consistent between json and hdf5 master file (Version, Pixels, Exposure Times, GateDelays, Acquisition Period, etc.)
- datatypes changed to keep it simple where possible: imageSize, dynamicRange, tengiga, quad, readnrows, analog, analogsamples, digital, digitalsamples, dbitreorder, dbitoffset, transceivermask, transeiver, transceiversamples, countermask, gates =>int
- replacing "toString" with arrays, objects etc for eg for scan, rois, etc.
- json header always written (empty dataset or empty brackets)
- hdf5 needs const char* so have to convert strings to it, but taking care that strings exist prior to push_back
- master attributes (redundant string literals->error prone
tests for master file
- suppressed deprecated functions in rapidjson warnings just for the tests
- added slsREceiverSoftware/src to allow access to receiver_defs.h to test binary/hdf5 version
- refactored acquire tests by moving all the acquire tests from individual detector type files to a single one=test-Caller-acquire.cpp
- set some default settings (loadBasicSettings) for a basic acquire at load config part for the test_simulator python scripts. so minimum number of settings for detector to be set for any acquire tests.
- added tests to test master files for json and hdf5= test-Caller-master-attributes.cpp
- added option to add '-m' markers for tests using test_simulator python script
* slsSupportLib done, at receiver rooting out in implementation
* removed from receiver and client
* removed everywhere except gui, python and client(commands.yaml and Detector.h)
* updated python
* fixed autocomplete to print what the issue is if there is one with ToString when running the autocomplete script to generate fixed.json. updated readme.md in generator folder
* formatting
* removed enums for dacs
* udpating autocomplete and generating commands
* removed gotthard from docs and release notes
* removed dac test
* bug from removing g1
* fixed virtual test for xilinx, was minor. so in this PR
* gui done
* binary in merge fix
* formatting and removing enums
* updated fixed and dump.json
* bash autocomplete
* updated doc on command line generation
* removing increments in dac enums for backward compatibility. Not required
* removed ROI from rxParameters (only in g1), not needed to be backward compatible
* removed the phase shift option from det server staruip
* updated RegisterDefs.h from firmware update
* Revert "updated RegisterDefs.h from firmware update"
This reverts commit 64f1b2546e.
* updated registers and had it formatted
* Revert "updated registers and had it formatted"
This reverts commit 1641b705b0.
* udpated registers from firmware, reading config file in server (chip config, reset chip, enable_clock_pattern) specific for matterhorn,this is done when powering on chip, removed startreadout, fixed status register bits, updated firmware version
* fix for patioctrl allowed for zxilinx and adding readout pattern for scientists that like to push the acquire button
* fixing default enable clock and readout pattern for xilinx (patioctrl has to be 32 bit)
* Xilinxctb/first image (#1094)
* reduce xilinxCTB readout done checks to single register, increased clockEna pattern limits, clear FPGA FiFos and counters on powerchip, disable counters 1-3 in matterhorn configuration
* change print of xilinxctb server
* remove acquisition done check
---------
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
* binary xilinx in
* formatting
* added reset of udp buffer FIFO to xilinxCTB
---------
Co-authored-by: Martin Mueller <72937414+mmarti04@users.noreply.github.com>
Co-authored-by: Martin Mueller <martin.mueller@psi.ch>
* jf wip: bunch id decoder only in pcb v2.0 check and comments
* auto comp disable the same way for both chip versions. compdisabletime also available for 1.1 now
* fixed tests
* formatting
* binary in
* cli: patwaittime also takes time argument, api: patwaitclocks and patwaitinterval, tcp: patwaitinterval is 2 functions for set and get, patwaitclocks remains a single for backward compatibility with -1 for get, server (loadpattern): clks using member names (needs to be refactored). needs tobe discussed what to do with pattern files.
* all tests passed
* fixed test
* exptime deprecated for ctb and xilinx
* pyctbgui..not there yet
* fixed in pyctbgui
* removed redundant warning for ctb and xilinx exptime in Detector class (already in module class handling all exptime signatures), patwait, patloop and patnloop have to be non inferrable commands because of support for old commands (level as suffix)
* fix formatting error from command line parsing
* fix tests for patwaittime
* bumped pybind11 version and added setuptools on host
* updated pybind11 tarball to 2.13 and in cmakefile to get 2.13 frpm github, also updated documentation about pybind 2.13
* updated client versioing, doc
* updating readme
---------
Co-authored-by: Dhanya Thattil <dhanya.thattil@psi.ch>
- renamed conda-recipe folder
- added a check to see if build and install folder exists in build.sh (conda recipe)
- created VERSION file that has '0.0.0'for developer but can be updated using update_version.py that takes in a version. The script checks for semantic versioning and updates VERSION file
- VERSION file also copied along with py files to slsdet in python cmakelist and build_pylib.sh (for conda), also copied in root folder for installations (for no coding purpose)
- init.py and setup.py reads this file to get the version (a bit differently to find the VERSION file)
- VERSION file read into cmake to get the version and also added to compile definition. So RELEASE removed from versionAPI.h (using SLS_DET_VERSION compile definiton instead) and also removed updateRelease script.
- conda getting project version from environment variable SLS_DET_VERSION that is set in build_pylib.sh prior.
- added 3.13 python to conda build
- anything related to ctb removed from release notes as users will always use developer
- sets 0.0.0 to VERSION file by running update_version.py without an argument
* jf: rolling back firmware required to v1.5 and 2.5, updated release notes, fixed a bug when updating server (when server name same as link name:throws with no message, pedestal mode check changed for the time being for loops to be 0xFF size
* compensating for jf fw bug for pedestalmode where loops should be 16 bit, but is 8 bit in fw. to be fixed in next version
* formatting
* formatting, merge fix
* fixed python test simulator to kill previous servers
* rmeoved merge binary
* g2: chip reconfigure variable not set when powering on at startup because readconfig is the one configuring the chip the first time to default chip settings
* cleaning up code
* first draft of fixing the free function available within the class
* removed class member function freeSharedmemory for both Detector and Module; made the free function freeSharedmemory accessible to python interface; setHostname if there is already a module in shm will recreate the Detector object while freeing shm completely and keeping detsize and intitialchecks (previous commit), sethostname called from DetectorClass in virtual command to have one point of entry (previous commit), testing Module class frees shared memory using free function
* Detector class: added copy and move constructor and assignmentoperators due to explicit destructor (DetectorImpl fwd declared), DetectorImpl class: included ZmqSocket to remove destructor (should not be virtual in any case), Module class: removed explciit destructor to allow compiler generated constructor and operators
* formatting
* minor fix for readme autocomplete
* updated client version date
* fixing nextframenumber properly with firmware
* updated firmware to have getnextframenumber and fixed setnextframenumber to reset also the header fifo when stopping
* fix tests for gotthard2
* get/set next frame number in G2 (firmware only has set, no get)
* firmware has issues: each stop keeps 2 frame header in fifo and the resetting frame number happens after that
* removed the option to set burstmode to burst external or continuwous internal
* needs to be revisited before 9.0.0
* added readoutspeed command to m3 (fullspeed - 10, half speed - 20, quarter speed - 40), removed reaodut pll, moved up system pll clock indices, leaving pll index in common altera code, default speed is half speed, allow only system_c0 to be set, the others can be obtained, same for clkphase, maxclkphaseshift, clkfreq. added to readoutspeedlist commands, updated help and updated tests
* updated readoutspeedlist command
- do not validate write reg, setbit and clearbit by default anymore
- --validate will force validation on the bitmask or entire reg
- remove return value for write reg (across server to client, but thankfully not in the Detector class)
- extend validation into writereg, setbit and clearbit for Eiger (always special)
- need to check python (TODO)
- missed the rx_zmqip implementations in detector.h and python bindings
* put back code to obtain adc and dac device indexafter loading device tree and then create folder iio_device_links and create symbolic links there according to device indices found. ln -sf operation not permitted, so folder has to be deleted and created everytime. Also refactored definitions to have all the xilinx name or detector specific stuff out of programbyArm.c
* uncommented waittransceiverreset at startup (should work now) and return of powering off chip at startup (error for transceiver alignment reset)
* updated registerdefs from firmware
* minor prints and updating names from registerdefs
* waittransceiverreset has been fixed in firmware and removing warnign for that, transceiver alignment check for powering off chip is not done in fw (giving a warning and returning ok for now)
* fixing ipchecksum (not done), removed startperiphery, allowing readout command to be allowed for xilinx when acquiring
