5 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5	4bdb229fb8	spot_finding: find connected components on the GPU ... The spot finder flagged strong pixels on the device and then labelled them on the host, so every frame sent the packed bitmask back - 2.26 MB on a large detector - and the host walked all of it to recover a few hundred pixels. Do the labelling on the device instead: compact the bitmask into a flat-index-sorted list, find each pixel's backward neighbours by binary search, union them lock-free with path halving, then label, accumulate and filter in one kernel. Only the spot list comes back, and only one stream synchronisation per frame. The gain in the ordinary case is modest - about a quarter off per-image spot finding - because the host algorithm is genuinely fast on a normal frame. What justifies it is the frame that is not ordinary. The host labels a sorted sparse list through a window spanning two detector lines, so its cost is quadratic in how many strong pixels share a line. A lit band of detector rows - a hot module, a panel edge - costs 33 ms at two rows and 377 ms at fifteen, all of it under the pixel cap that was supposed to bound this, and none of it maskable when the cause is a diffraction ring rather than a defect: a ring runs tangent to a row at its top and bottom, which is exactly the shape that hurts. The device version is flat at 0.05 to 0.64 ms across every geometry tried, so an online run no longer stalls a quarter of a second on an ice ring. Rejecting an over-cap frame is now free too, since the count is known before any pixel is written. Also label once and filter three times. The per-image minimum-pixel search runs the extraction at three settings, but that setting only decides which components are kept - it does not change the components - so the search itself need not be repeated. This helps the host path as much as the device one. The resolution mask moves to the device as a bit mask, uploaded when the limits change rather than per frame, since the compaction needs it there. Parity is asserted permanently rather than argued: five cases covering realistic frames, occupancy from a hundred pixels to past the cap, the pathological geometries including rings, the resolution mask, and a hundred-repeat determinism check - requiring the same partition, the same spot order, and identical counts. The centroid is a float sum and therefore order-dependent, so the device walks each component from its root in ascending order and fuses its multiply-add the way the host's does; note that whether the host fuses at all depends on the architecture flags, so exact centroid equality is asserted where the compiler fuses and a two-ulp bound otherwise. Making those accumulators integer would remove that dependence entirely and is worth doing separately. Regression set: all 37 crystals identical to the last printed digit. Unit suite passes with the new cases. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-02 13:34:43 +02:00
leonarski_fandClaude Opus 5	16bf3408f0	Address code-review findings; make detection limits detector-driven ... One changeset, developed together in response to a review of this branch, so the files carry several of the changes at once. Full test suite passes (733 cases). Spot finding - Split ImageSpotFinder into Detect() (flag strong pixels - the expensive per-pixel pass) and ExtractSpots() (CCL + min/max-pix + resolution mask), with Run() = both. The per-image min-pix escalation now detects ONCE and repeats only the cheap extraction, instead of re-running the whole finder four times per frame as it did on the default path. It also keeps the winning attempt's spot list rather than re-extracting it, so the frame that is integrated is exactly the frame that was scored - which a GPU re-extract could not guarantee (float atomic ordering). - spot_finding_time_s no longer swallows indexing time, and indexing_time_s now sums every escalation call instead of reporting only the last. Detection limits follow the detector - The azimuthal-integration upper q and the spot-finding high-resolution limit are now std::optional, in the C++ structs AND in the OpenAPI schema, and resolve to the detector's own maximum (DiffractionExperiment::GetDetectorMaxQ_ recipA). Adaptive detection reads a pixel's ring from the azimuthal bins, so a pixel outside that q range could never be strong - the integration range silently bounded what detection could see, regardless of the requested resolution limit. Regenerated the C++ and TypeScript clients; the viewer and the web frontend each gained a "to detector edge" switch. Detection defaults are now per workflow (measured, not assumed) - Stills: adaptive detection, min-pix chosen per image, no resolution clipping. - Rotation: fixed-threshold finder, min-pix 2, 1.5 A limit. On a 33-crystal rotation battery, adaptive detection helped four hard crystals but deterministically broke three (a lost space group, a halved indexing rate, a collapsed merge), and the detector-edge limit cost indexing on a strong rotation set (100.0 -> 96.8%). Each is still overridable by its flag, and --no-adaptive-spots is new. Indexer seed escalation - Stop escalating once a seed's lattice explains >= 90% of the seed spots. Previously any frame with >= 80 spots always paid three indexer calls, online broker included. Merge-consistency filter - --min-image-cc gated on a per-image CC computed BEFORE the stills partiality post-refinement and never refreshed; the refiner now recomputes it, so the reported CC describes the data that are actually merged. - Replaced the per-call cc_mask argument with one MergeOnTheFly flag, so the merge, the error model and MergeStats can no longer disagree about which images are in (the --scale path merged unfiltered while its statistics were filtered). Per-image B-factor refinement (-B) removed - Measured on four serial-stills datasets: it is a no-op where the per-image fit is well conditioned and actively harmful where it is not (CC1/2 -8.1, R_meas +23.2 on the weakest large-cell set, whose fits hit their [-50, 200] bounds on 14-25% of images). It had also been silently DISCARDED since the partiality post-refinement landed - reported but not applied. Rather than fix and keep a knob with no demonstrated benefit, the flag and the whole image_scale_b_factor chain are gone: setting, scaling fit, message field, CBOR, HDF5 write and read-back, per-image plot, OpenAPI enum, viewer column and checkbox, docs. ScaleOnTheFly no longer needs Ceres at all - the fit is a linear IRLS. (The Wilson per-image b_factor is a different quantity and stays.) Stills partiality width now fits both of its components - sigma^2 = gamma0^2 + (gamma_e*d*)^2 instead of a purely angular gamma_e*d* with gamma0 pinned to 0. Fitted per crystal by least squares of dist_ewald^2 on d*^2. The angular-only width is fitted over a d*^2-dense population, so it was pinned by the high-resolution edge and collapsed at low d*: median partiality 0.008 beyond 13 A for reflections that were plainly recorded, 55% of them under the merge's partiality floor, and the survivors divided by those values - which inflated the merged low-resolution intensity scale 3.6x (~ +9 A^2 of apparent B). Measured on 5000 stills: the ramp flattens to 0.89x, no observation is dropped any more (701750 -> 716811), shell-mean CC1/2 and R-free improve slightly. Note CC1/2, R_meas, completeness and a B-refining R-free are all blind to that ramp, which is why it survived earlier validation; the cost is high-resolution R_meas (98.5 -> 101.9 shell-averaged). Removed dead code from add-then-remove churn - Prediction-time "still partiality" (unreachable: no setter), the phantom IndexingSettings::min_indexed_spot_fraction knob (getter, no setter - now the constant it always was), StillsPartialityRefine's caller-less Settings constructor and its reference to a long-gone env var, ProcessImage's unread bool return, an unused include, and a dead viewer overlay hook. Also - Viewer: the magnifier compared a QImage with itself, so its scene rect was set once ever and it could not pan into a larger dataset; the hover tail timer could fire after leaveEvent and resurrect the resolution readout outside the image. - update_version.sh regenerated the frontend lock file BEFORE bumping the version (every release shipped an off-by-one lock), and did git rm/git add on a path that has not existed since the client moved to src/client - with no set -e, both failed silently. - fpga/pcie_driver/postinstall.sh tested "[ ! occurrences > 0 ]", which is a redirect, not a test, so dkms add never ran. - Unit tests for the adaptive-threshold host functions, which had none. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-27 09:07:00 +02:00
leonarski_f	cc3eb8352c	v1.0.0-rc.148 (#58) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_broker: Improve azimuthal integration (add <I^2> calculation) * jfjoch_broker: Fixes around indexing, aiming to handle multi-lattice crystals (work in progress, it is not fully integrated) * jfjoch_writer: Save mean(I), stddev(I), and count(I) for each azimuthal bin Reviewed-on: #58	2026-06-08 08:30:35 +02:00
leonarski_f	c981e1b91c	v1.0.0-rc.137 (#46) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * jfjoch_broker: Better track time for each operation in the processing stack * jfjoch_broker: Rewrite preprocessing of diffraction images in the non-FPGA workflow to better use GPUs (work in progress) * jfjoch_broker: Remove ROI calculation in the non-FPGA workflow (work in progress) * jfjoch_viewer: Toolbar displays image number starting from 1 (instead of 0) Reviewed-on: #46	2026-04-25 19:59:21 +02:00
leonarski_f	061152279c	v1.0.0-rc.91	2025-10-20 20:43:44 +02:00