7 Commits

Include renames

Author	SHA1	Message	Date
leonarski_fandClaude Opus 5.5	7349832309	Live rugnux timing: from the puller's receive time, and from the first image ... The live panel showed ~80 Hz on a 100 Hz collection. Its clock started when the receiver had applied and forwarded the START message, so the START -> first image gap counted as collection time; the images were stamped when a forward thread dequeued them, and the last image only after END and the thread joins; and N images were divided by a span holding N-1 intervals. - ImagePullerOutput carries `received`, a steady_clock time set by the TCP and ZeroMQ pullers as the message comes off the socket, before it is queued or deserialised (TestImagePuller stamps it on Put when unset). - RugnuxLiveStatus takes those times: START's for its origin, each image's for the first and last image (min/max, as forward threads report out of order). last_image_s is the last data image's puller time. - Zero of every reported time (elapsed_s, steps' started_s, probe_s, last_image_s, cut_s) is now the FIRST IMAGE, as the frontend already said; before the first image arrives "now" is 0 and earlier steps are negative. The START -> first image time is recorded on its own as start_to_first_image_s (snapshot, OpenAPI rugnux_live_status, regenerated C++ model and frontend client, OpenAPIConvert). - The frontend rate is (images_received - 1) / (last - first image); the panel headers show "START -> first image X.X s". - The broker logs "rugnux live: START -> first image ..., N images in T s from the first to the last (R Hz)"; "done X s after the last image" and last_image_to_written_s run from the puller time of the last image. The deadline timer is unchanged (it still starts once the forward threads have joined). No analysis result changes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01PXc1zD1yxHqaR1DGdCTHL4	2026-10-19 19:35:54 +02:00
leonarski_fandFilip Leonarski	19b135186d	v1.0.0-rc.175 (#85) ... * Rugnux: Processes a collection live while jfjoch_broker writes it (`rugnux <master.h5> <broker URL>`). * Rugnux: Processing starts on the first images and confirms its choices once all are in, so analysis can begin during collection. * Rugnux: Faster processing, especially on servers with several GPUs and CPU sockets and on computers without a GPU (`--no-gpu`, macOS). * Rugnux: Uses much less GPU memory, so large data sets stay on the GPU of smaller cards, and a data set too large for the card is processed on the CPU instead. * Rugnux: On macOS, Bragg integration runs on the Apple GPU. * Rugnux: Better handling of twinning and pseudo-symmetry, with the twin hypothesis written as `<prefix>_twin_<SG>.mtz`, and a wrong `--model` no longer confirms the data or decides the hand. * Rugnux: `--model` accepts predicted (AlphaFold) models and falls back to molecular replacement when the model is not placed as a rigid body (experimental `--mr` forces it), settling space group, hand and twinning and writing a different answer as `<prefix>_mr.mtz`. * Rugnux: Molecular replacement is faster and settles the space group in more cases with several copies in the asymmetric unit. * Rugnux: Deposition-ready mmCIF, a richer report, and numbered steps on the terminal with the full log in `<prefix>_log.txt`; `_P1.mtz`, `--estimate-beam-center` and `--beam-center-search` are removed. * Rugnux: The beam-stop shadow is found correctly on tilted detectors. * Rugnux: Stills files that record a stationary goniometer axis get the default stills geometry refinement. * jfjoch_viewer: "Analyze dataset" uses the same defaults as a bare `rugnux <file>`, and shows the results of processed CBF, marCCD and SMV sweeps. * jfjoch_viewer: The Files panel refreshes on F5 and every few seconds, and the plot type and other selections stay put during live collection. * jfjoch_writer: Memory stays bounded and old data files are closed efficiently on long runs, any failure ends the run in an error state the broker is told about, and the master file appears only after its data files; the ZeroMQ pusher logs when a stalled writer makes it drop images. * Fixes: The TCP image pusher no longer blocks the broker's receiver, GPU out-of-memory failures stop with a clear message, and the XDS plugin masks module and chip edges. --------- Co-authored-by: Filip Leonarski <jungfrau@filips-mac-mini.home> Reviewed-on: #85 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-10-16 15:34:43 +02:00
leonarski_f	cc3eb8352c	v1.0.0-rc.148 (#58) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. * jfjoch_broker: Improve azimuthal integration (add <I^2> calculation) * jfjoch_broker: Fixes around indexing, aiming to handle multi-lattice crystals (work in progress, it is not fully integrated) * jfjoch_writer: Save mean(I), stddev(I), and count(I) for each azimuthal bin Reviewed-on: #58	2026-06-08 08:30:35 +02:00
leonarski_f	bb9f5c715f	v1.0.0-rc.135 (#44) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * Multiple small bug fixes scattered across the whole code base. (detected with GPT-5.4) * jfjoch_viewer: Improve image render performance Reviewed-on: #44 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-16 11:59:59 +02:00
leonarski_f	64002f1e29	v1.0.0-rc.129 (#36) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Significant improvements in TCP image socket, as a viable alternative for ZeroMQ sockets (only a single port on broker side, dynamically change number of writers, acknowledgments for written files) * jfjoch_broker: Delta phi is calculated also for still data in Bragg prediction * jfjoch_broker: Image pusher statistics are accessible via the REST interface * jfjoch_writer: Supports TCP image socket and for these auto-forking option Reviewed-on: #36 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-03-05 22:13:12 +01:00
leonarski_f	f3e0a15d26	v1.0.0-rc.127 (#34) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Default EIGER readout time is 20 microseconds * jfjoch_broker: Multiple improvements regarding performance * jfjoch_broker: Image buffer allows to track frames in preparation and sending * jfjoch_broker: Dedicated thread for ZeroMQ transmission to better utilize the image buffer * jfjoch_broker: Experimental implementation of transmission with raw TCP/IP sockets * jfjoch_writer: Fixes regarding properly closing files in long data collections * jfjoch_process: Scale & merge has been significantly improved, but it is not yet integrated into mainstream code Reviewed-on: #34	2026-03-02 15:57:12 +01:00
leonarski_f	040cf08386	v1.0.0-rc.36	2025-05-05 19:32:22 +02:00