9 Commits

Include renames

Author	SHA1	Message	Date
leonarski_f	511be0c366	v1.0.0-rc.165 (#75) ... * `rugnux --model` adopts the model's space group as a label where the data were merged in its enantiomorph, instead of reindexing the reflections - which swapped I(+) with I(-). * `rugnux --model` warns, naming the atom, when the anomalous density at the model's atoms comes out inverted, which means the data and the model are in opposite hands. * `rugnux --model` writes an anomalous difference map (`<prefix>_anom.ccp4`) when the merge kept the Bijvoet split, and names the ten model atoms it peaks highest on as `ANOMALOUS_SITE_01`..`_10`. * `MEAN_ATOM_DENSITY_SIGMA` is read from the map by cubic rather than linear interpolation and comes out around a tenth higher; it is no longer comparable with the figure earlier versions printed. * `rugnux --model` reads an mmCIF coordinate file as well as a PDB one, gzipped or not, taking the format from the file's content rather than its name. * A model `rugnux --model` cannot use is reported as a `WARNING:` line in the results report instead of only in the log. * The rugnux results report has a `10. MODEL VALIDATION` section when `--model` was given; `REPORT_VERSION` is 4, `WARNINGS` moves to section 11 and no existing key changed. * The rugnux results report records how the run was invoked, what it cost and what it ran on: `COMMAND_LINE=`, `WALL_TIME=` and `GPU_COUNT=` / `GPU=`. * rugnux says which GPUs it can see before it starts processing. * `rugnux --export-unmerged` also writes `<prefix>_unmerged.mtz` on a `--no-merge` run, and is ignored on a run with no output prefix instead of writing a file called `_unmerged.mtz`. * `/start` asks the writer whether the run can be written before the detector is armed, so a run whose master file already exists, or whose output directory cannot be created, is refused up front with the writer's own message. This needs the TCP image stream or the built-in HDF5 writer; the ZeroMQ stream is unchanged. * A calibration that fails goes to `Error` carrying the reason instead of `Inactive`, so `/wait_till_done` and `/wait_until_running` report it; a cancelled calibration still goes to `Inactive`. * `/wait_till_done` answers 500 with the message when a collection ended in an error. A cancelled collection and a collection that only triggered a warning still answer 200. * A pending start failure is discarded by `/cancel` and `/deactivate`, as it already was by `/start` and `/initialize`. * `/scan_result` no longer reports the previous run's images after a collection that failed to start, or after `/deactivate`. * The TCP image stream protocol version is 4. `jfjoch_writer` and `jfjoch_broker` have to be of the same release, as before. Reviewed-on: #75	2026-08-27 22:16:54 +02:00
leonarski_f	538f3504d3	v1.0.0.rc-161 (#71) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * **rugnux: significantly better quality of results, and faster.** A large rework of integration, scaling, merging, geometry refinement and space-group determination, together with measurements the program previously made no attempt at - the direct beam before indexing, the beam stop, the goniometer rotation scale, and the stretches of a sweep the crystal did not deliver. A rotation dataset typically gains observations at better <I/sigma> and R_meas, and every `mx` and `scale` run writes a `<prefix>_report.txt` results report modelled on XDS's `CORRECT.LP`. Many defaults moved with it: spot detection is self-calibrating, beam-stop detection and rotation geometry post-refinement are on, resolution limits default to as far as the detector reaches, and ice-ring handling engages only where the crystal is measured to have ice. * **jfjoch_viewer:** the beam-stop shadow, the detector calibration and the beam-centre measurement are reachable from "Analyze dataset"; the settings panel reports how the sample moved and how polarized the beam was; image rendering and interaction are faster. * **Performance:** bitshuffle+LZ4 images are decoded on the GPU rather than on the host, with the bitshuffle inverse fused into preprocessing so the decompressed frame is never held in device memory. * **Broker, writer, packaging and build:** image-slot lifetime and locking fixes, per-image datasets sized by the images actually written, the Debian/Ubuntu broker package renamed to `jfjoch`, and `image_analysis` compiling under MSVC again. **Breaking change to the rugnux command line:** * `--azint-only` and `--scale` are **removed**, replaced by `--mode azint` and `--mode scale`; the full pipeline is `--mode mx` and remains the default. A script passing the old flags now fails with the list of valid modes rather than silently running the wrong one. * `-t`/`--stride` is **refused on rotation data**: skipping frames cuts every reflection's rocking curve, so the combined fulls and their partiality would be measured over frames the sweep never recorded. Select a contiguous range with `-s`/`-e` instead. `--mode azint` and `--force-still` still take a stride. **Breaking changes to OpenAPI** - regenerate the client (`jfjoch-client` 1.0.0-rc.161, `frontend/src/client`) or read the affected fields as optional: * `image_scale_b` is removed from the `plot_type` enum, so a client requesting that plot now gets an error rather than a curve. * `azim_int_settings.high_q_recipA`, `spot_finding_settings.high_resolution_limit` and `spot_finding_settings.low_resolution_limit` are no longer `required`. All three mean "no limit at that end" when unset and are omitted from the response instead of carrying a placeholder value, which raises in a client generated from an rc.160-or-earlier spec. A value of 0 is still accepted and means the same thing. **Breaking changes to the stored formats** - a consumer reading these fields must treat them as optional: * The per-image image-scale B factor is no longer computed, so `/entry/MX/imageScaleBFactor` is absent from newly written HDF5 files and the corresponding key is absent from the CBOR DataMessage and END blocks. Files written by rc.160 and earlier still contain it and still open; nothing in the pipeline reads it any more. * `_reflns.jfjoch_diffrn_ISa` now carries the whole-range `1/sqrt(a*b)` that XDS's ISa denotes, and the error-model `a` and `b` are reported in XDS's convention; the strong-reflection asymptote moves to `_reflns.jfjoch_diffrn_ISa_asymptotic`. **A file written by an earlier version carries the asymptote under the plain `ISa` name.** Reviewed-on: #71 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-08-13 17:03:10 +02:00
leonarski_f	451310f43d	v1.0.0-rc.158 (#68) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * Analysis: The azimuthal-integration solid-angle correction now follows the incidence angle to the detector normal (`cos^3` of that angle) instead of `cos^3(2*theta)`, so it is correct for a tilted detector and matches PyFAI `solidAngleArray` and MAX IV azint (unchanged for an untilted detector). Crystal geometry refinement (`XtalOptimizer`) no longer silently ignores an imported PONI `rot3` (rotation about the beam): it is applied as a fixed rotation in the residual so refinement stays consistent with the rest of the pipeline. Polarization and azimuthal binning already honoured `rot3` through the full PONI rotation. * jfjoch_viewer: Open datasets on the WSL2/UNC filesystem (paths starting `\\`); write processing outputs next to the input file, with a Browse button and independent `_process.h5` / merged `.mtz`/`.cif` toggles; and show the determined space group in the merge-statistics window. * rugnux: Accept an absolute `-o` output prefix in offline processing. * Packaging: The self-contained Linux viewer `.tgz` now bundles cuFFT, so it runs without a system CUDA toolkit (`.deb`/`.rpm` are unchanged, distro-managed). * Docs: Bring the analysis references up to date with the code. `docs/CPU_DATA_ANALYSIS.md` now reflects the unified profile-fit Bragg integration engine, multi-lattice indexing, azimuthal phi binning, the radial parallax/bandwidth profile with sub-pixel centring, the rot3d capture-fraction handling and the automatic CC1/2 resolution cutoff, and drops the descriptions of features that were never implemented (French-Wilson amplitudes, the still excitation-error partiality model); `docs/RUGNUX.md` documents the new `--resolution-cutoff`/`--resolution-cc-target`/`--resolution-shells`, `--min-captured-fraction`, `--mosaicity`, `--reference-column`, the azimuthal correction toggles and the geometry-override options, and corrects the `-N` default. The outdated in-source design notes (ICE_RING_DETECTION, BRAGG_INTEGRATION_ENGINE, NEXTGEN_INTEGRATOR) are removed.Reviewed-on: #68 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-07-12 19:42:29 +02:00
leonarski_f	6136f858af	v1.0.0-rc.154 (#64) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Fix to TCP file pusher (remove kernel zero copy to improve reliability) Reviewed-on: #64 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-06-25 18:12:00 +02:00
leonarski_f	75e401f0e5	v1.0.0-rc.153 (#63) ... This is an UNSTABLE release. It includes many experimental features, as well as many AI generated fixes. We recommend using rc.152 for production use. * jfjoch_broker: Add EXPERIMENTAL pixelrefine mode for image processing * jfjoch_broker: Allow to load user mask from 8-bit and 16-bit TIFF files * jfjoch_broker: Add ROI calculation in non-FPGA workflow * jfjoch_broker: Fixes to TCP image pusher * jfjoch_broker: Remove NUMA bindings * jfjoch_broker: Improvements to indexing * jfjoch_broker: For PSI EIGER, trimming energies are taken from the detector configuration (now compulsory) instead of hardcoded values * jfjoch_writer: Save ROI definitions and the per-pixel ROI bitmap in the master file; azimuthal ROIs support phi (angular) sectors * jfjoch_viewer: Major redesign with dockable panels and saved layouts, plus on-canvas creation/move/resize of box, circle and azimuthal ROIs * jfjoch_viewer: Run jfjoch_process reprocessing jobs from inside the GUI and overlay per-run results Reviewed-on: #63	2026-06-23 20:29:49 +02:00
leonarski_f	fc68a9baed	v1.0.0-rc.146 (#56) ... This is an UNSTABLE release. The release has significant modifications for data processing - in case of troubles go back to 1.0.0-rc.144. jfjoch_process: Generate a dedicated file (_process.h5), which can be used as a replacement for the _master.h5 file for a reanalyzed dataset. jfjoch_process: Improve the performance of scaling and merging, implement on the fly scaling. jfjoch_writer: All final data analysis results are repopulated in the _master.h5 file. jfjoch_scale: Dedicated tool for rescaling/merging existing data. jfjoch_viewer: Fix bugs where pixel labels where displayed on a wrong pixel. WARNING! Scaling and merging are experimental at the moment, and may not provide reasonable results for the time being. Reviewed-on: #56	2026-05-28 18:48:35 +02:00
leonarski_f	bb9f5c715f	v1.0.0-rc.135 (#44) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.132. * Multiple small bug fixes scattered across the whole code base. (detected with GPT-5.4) * jfjoch_viewer: Improve image render performance Reviewed-on: #44 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-04-16 11:59:59 +02:00
leonarski_f	64002f1e29	v1.0.0-rc.129 (#36) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Significant improvements in TCP image socket, as a viable alternative for ZeroMQ sockets (only a single port on broker side, dynamically change number of writers, acknowledgments for written files) * jfjoch_broker: Delta phi is calculated also for still data in Bragg prediction * jfjoch_broker: Image pusher statistics are accessible via the REST interface * jfjoch_writer: Supports TCP image socket and for these auto-forking option Reviewed-on: #36 Co-authored-by: Filip Leonarski <filip.leonarski@psi.ch> Co-committed-by: Filip Leonarski <filip.leonarski@psi.ch>	2026-03-05 22:13:12 +01:00
leonarski_f	f3e0a15d26	v1.0.0-rc.127 (#34) ... This is an UNSTABLE release. The release has significant modifications and bug fixes, if things go wrong, it is better to revert to 1.0.0-rc.124. * jfjoch_broker: Default EIGER readout time is 20 microseconds * jfjoch_broker: Multiple improvements regarding performance * jfjoch_broker: Image buffer allows to track frames in preparation and sending * jfjoch_broker: Dedicated thread for ZeroMQ transmission to better utilize the image buffer * jfjoch_broker: Experimental implementation of transmission with raw TCP/IP sockets * jfjoch_writer: Fixes regarding properly closing files in long data collections * jfjoch_process: Scale & merge has been significantly improved, but it is not yet integrated into mainstream code Reviewed-on: #34	2026-03-02 15:57:12 +01:00