Commit 071b4ab made mount() return SUCCESS as soon as it saw the intermediate
TELL "state"/Busy event, before the later "Gripper detection" event is read,
so an empty-gripper mount completed silently with no MountingFailed/pop-up.
check_command_ok blocks (wait_not_busy) until the mount sequence finishes, so
after it returns the robot's own record is authoritative: if get_mounted_sample()
is None the gripper was empty -> return NO_PIN_IN_GRIPPER, which the mounting
service maps to MountingFailed("No Pin in Gripper"). Covers manual and automation.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Fix the GUI pop-up path and add personnel-safety-system (PSS) gating so
door-open / beam-down / shutter-closed conditions are surfaced and acted on.
- exception pop-ups: connect the previously-orphaned http_error signal;
failed user operations now raise a modal dialog, background/polling errors
a non-modal banner.
- PSS device (devices/pss_state.py) reading EH1-PSYS PROHIBITED-STATE /
ALARM-STATE; new critical DoorSafetyError + DOOR_SAFETY_ERROR code.
- mounting service blocks mount/unmount when the hutch is not prohibited or
an alarm is active; /status now publishes pss_prohibited / pss_alarm.
- GUI blocks manual mount/unmount and the automation Run button immediately
(pop-up) on door-open, and shows a warning banner while an alarm is active.
- centralise per-action precondition checks (ring current, safety shutter,
hutch door) into one combined "continue?" dialog with a session-global
"don't ask again for 1 hour" snooze, applied to all data-collection buttons.
- live automation pauses and auto-resumes on bad conditions (beam, shutter,
door, robot) with continue-now / stop overrides, gated by a default-on
"Pause on bad conditions" checkbox replacing the dead CHECK_ENABLED constant.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add DbOverrideLineEdit: a numeric field holding both a database value and
the user's value, driven by a per-tab Database/User-values toggle. The
user's value persists across samples, can be reverted to the database
value, and recovered again - replacing the clunky per-field checkboxes.
Fix the dtz<->resolution coupling so editing one updates the other in both
Database and User modes (previously it broke whenever a value was
overridden). Wire resolution, detector distance, transmission, exposure,
rotation total/image angle and the raster grid element size through the
new widget; other panels are untouched.
Add tests covering persist/revert/recover, the toggle's downstream emit,
the dtz/resolution coupling in both modes, and cross-sample persistence.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
appleb_m
appleb_m
duan_j