SICS-418 Make sure hnotify sends messages as hdbevents when using the
JSON protocl
site_ansto/instrument/config/hmm/hmm_object.tcl
Initialise the hmm object to make sure the read type is set.
nxscripts_common_1.tcl
Set the read type when saving the hmm data.
server_config.tcl
Fix the autosave command so that you can enable/disable autosave while
the histogram memory is running.
protocol.c
Reduce noise in log files when using the JSON protocol. Don't log
messages generated during macro execution (ie within a TCL proc).
motor.c:MotorStatus
Abort the current operation, the scan command and batch files when a
motor object returns a hardware fault status value.
motor_dmc2280.c
set driver status to HWFault when the driver is in the error state.
r3251 | ffr | 2011-09-23 08:49:00 +1000 (Fri, 23 Sep 2011) | 25 lines
This is to allow multiple instance of the same device type without clashing of persistent data
r3248 | dcl | 2011-08-22 11:30:20 +1000 (Mon, 22 Aug 2011) | 3 lines
the sct_lakeshore_336.tcl driver uses. You can set the temperature and
the sensor readings have a random one degree fluctuation.
r3238 | ffr | 2011-08-12 08:46:21 +1000 (Fri, 12 Aug 2011) | 4 lines
two lakeshore controllers. Most of the remaining globals are harmless
or unused but they should be removed.
r3237 | ffr | 2011-08-12 08:41:56 +1000 (Fri, 12 Aug 2011) | 4 lines
D site_ansto/hardsup/oldsct_modbusprot.c
D site_ansto/hardsup/libhlib.a
D site_ansto/instrument/deploySICS.sh.new
D site_ansto/instrument/reflectometer/config/beamline/old_polanal.tcl
D site_ansto/instrument/reflectometer/config/beamline/old_sct_RFGen.tcl
D .cproject
D cscope.out
D tags
D psi/hardsup/libhlib.a
D psi/tecs/libtecsl.a
r3234 | ffr | 2011-07-24 13:13:46 +1000 (Sun, 24 Jul 2011) | 13 lines
Set the current to the target value when we're within one step rather than within tolerance to avoid undershooting the target.
Do not try and get the state when initialising the driver because it will fail to create the driver properly if the RF generator is unavailable on SICS startup. The current is zero when the RF gen is power cycled so it is safe to set the current reading and target current as zero in initialisation so we just set the operating frequency and everything else is left at zero.
r3228 | ffr | 2011-06-26 12:18:27 +1000 (Sun, 26 Jun 2011) | 3 lines
Also made generic so you can create a temperature control for example instead of a speed based control.
r3218 | ffr | 2011-06-20 10:02:04 +1000 (Mon, 20 Jun 2011) | 2 lines
Renamed LambdaResFWHM_percent to wavelength_spread and added wavelength_spread_nominal which will be the wavelength_spread calculated from speed and tilt angle.
Lambda -> wavelength_nominal, added wavelength for analysis code.
r3145 | ffr | 2011-05-19 08:49:08 +1000 (Thu, 19 May 2011) | 3 lines
Moved Attfactor, Transmission, BeamCenterX, and BeamCenterZ back to the parameters group.
r3144 | ffr | 2011-05-19 08:48:16 +1000 (Thu, 19 May 2011) | 2 lines
