the capture command in that it not put resluts into the Tcl interpreter.
This broke scriptcontext scripts in complicated situations.
- Resolved some issues with the TAS calculation and negative scattering sense.
- Fixed a bug which did not reset the state to idle after checking
reachability in confvirtualmot.c
SKIPPED:
psi/autowin.c
psi/eigera2.c
psi/jvlprot.c
psi/makefile_linux
psi/sinqhttpopt.c
psi/tasscan.c
- New NeXus libraries
- Added new raw binary transfer mode for mass data
- Added a check script option to configurable virtual motor
SKIPPED:
psi/dumprot.c
psi/make_gen
psi/psi.c
psi/rebin.c
psi/sanslirebin.c
did not have enough counts
- Reduced polling frequency in emon
- Fixed a scriptcontext bug which would cause it to dump core in SctTransact
on interrupts
- Fixed an issue with missing <nl> at the end of batch files
- Added a feature which does not call halt when counting stops in hmcontrol.c
This is necessary for the BOA CCD
- Initalized doNotFree properly in hipadaba.c
- Added the travelling salesman reflection measurement algorithm
- Added another component to amorset
- Removed old SicsWait from nserver.c
- Added a means to nxscript to write 16 bit data for BOA
- Modified tasub to accept a drivabel as a motor and not only a motor.
This became necessary to make EIGER work as A2 on EIGER is a virtual
motor
SKIPPED:
psi/amorcomp.h
psi/amordrive.h
psi/amorset.c
psi/amorset.h
psi/amorset.tex
psi/amorset.w
psi/el734hp.c
psi/el737hpdriv.c
psi/make_gen
psi/pardef.c
psi/polterwrite.c
psi/psi.c
psi/sinqhttpopt.c
- Added a warning for excessive data rates on monitors
- Added statistics to devser and thus to scriptcontext
- Added byte concatenation to dynstring
- Added aborting for reflection generation to fourmess.c
- Added data checksum testing to hipadaba, use for update tests
- Fixed interrupt discovery in network.c, caused invalid interrupt
codes which in turn confused sicscron which had to be fixed too.
- Renamed ubcalc into ubcalcint in order to reclaim the ubcalc for Jurg
- Added an a3offset to tasub in order to fix what I perceive an IS problem
- Added support for the newer version of the Siemens SPS, the S7
- Added a not yet fully working sinqhttpopt driver which talks to
http HM without libghttp
SKIPPED:
psi/delcam.c
psi/make_gen
psi/psi.c
psi/sinq.c
psi/sinq.h
psi/sinqhttpopt.c
psi/slsvme.c
psi/spss7.c
- Implemented the desired run/drive behaviour: drive waits for what it started
run starts, and success waits for everything to finish. This required
changes to a lot of files.
- Fixed a bug in remob which supressed required messages
- Supressed superfluous message from fmess
- Expanded multicounter to deal with threshold commands nicely
- Fixed an an issue with an uninitialized dummy connection in nserver
- Many changes to simidex to make it work in a more reliable way.
- Added hdbfactory path alias targetpath
- Extended frame to deal with sinqhttp HM
- Extended the Hdb adapter to support SICSdata
- Made the simulated histogram memory driver work properly when
data has been set.
- Implemented the hfactory command
- Removed hdbcommand which was never finsihed
- Fixes to make RITA work
- tasub extended to calculate UB from cell alone, support for elastic mode
- New MultiCounter as abstraction for counting on HM's
- regression test driver for counters
- Changes to Hipadaba
- Added project to histogram memory code
- Started regression testing code
- Added hill climbing as optimization method to optimise
- New chopper driver for MARS Juelich chopper system
- New docbook based SANS manual
SKIPPED:
psi/amorcomp.c
psi/amordrive.h
psi/amorset.c
psi/amorset.h
psi/amorset.tex
psi/amorset.w
psi/julcho.c
psi/libpsi.a
psi/make_gen
psi/psi.c
- Fixed new AMOR settings module
- Initial implementation of the new SICS hierarchical parameter database
SKIPPED:
psi/amorset.c
psi/libpsi.a
psi/sps.c
