852bc7462b
Updated from ics2-pelican
2013-12-20 09:08:54 +11:00
4643a1fd04
SICS-700 Enable region of interest configuration parameters for histogram memory
2013-12-20 09:08:53 +11:00
472ca4f9d9
Updated from ics2-pelican.
2013-12-20 09:08:53 +11:00
7b814089ff
SICS-705 Fix mercury log file creation bug.
2013-12-20 09:08:52 +11:00
99955b01da
SICS-698 Make Bruker magnet driver setpoint driveable.
2013-12-20 09:08:51 +11:00
5b4d044835
Make SIM_RFGen.tcl executable.
2013-12-20 09:08:51 +11:00
093479f808
SICS-697 Make named links to data group using new typed naming system.
2013-12-20 09:08:49 +11:00
6692a1a2bb
SICS-699 Provide a hipadaba "control" group for special hdb nodes like environment setpoints and sensor readings
2013-12-20 09:08:48 +11:00
58e35efba3
SICS-695 Save a named link for scan variables and other objects if required.
...
If a SICS object has a "linkname" attribute then that name will be used when
making links in the data file.
2013-12-20 09:08:47 +11:00
5df895cc76
SICS-694 Save data with named links on hdb nodes decorated with named links.
...
Note the use of the Tcl 8.5 {*} expand feature to expand a list into
separate arguments when calling a function.
2013-12-20 09:08:47 +11:00
e9399b6990
SICS-687 Add 'nxscript makenamedlink' command.
2013-12-20 09:08:46 +11:00
650d1c0127
SICS-693 newfile BEAM_MONITOR fails.
...
Make sure that the "axes" hdb property defaults to "run_number" for the BEAM_MONITOR filetype.
2013-12-20 09:08:46 +11:00
83670b3d04
SICS-690 SICS fails to initialise the hmm object on Kookaburra.
2013-12-20 09:08:45 +11:00
dc85708451
- Added a AsconReadDoneReconnect to ascon. This handles the case better when
...
a server hangs up diretcly after a message.
- Some output was suppressed while tracing, fixed
- Make ready to compile both with Ubuntu 32 and 64 or /usr/local
based ON in general. Just in psi/makefile_linux the top include has
to be adapted
- Removed epics drivers from SICS. Still in source to be reenabled when
needed
- Added FindMotor
- Added sput, sappend and slab to nxscript using the new sicsget module
- Fix to sget to fix the "mot softzero" problem
SKIPPED:
psi/make_gen
psi/psi.c
psi/sinqhttpopt.c
psi/spss7.c
2013-12-19 10:24:54 +00:00
57475b623e
initialize match to zero on connect
2013-12-17 16:53:28 +11:00
0266abbd94
Change the temperature factor from 10.0 to 20.0
...
This refelcts the firmware update to the RVA ROM removing the factor
of 2.0 for the temperature reading and setting
2013-12-16 13:36:35 +11:00
b2660cd135
Merge branch 'RELEASE-3_0' of ics2-dev.nbi.ansto.gov.au:/opt/sicsdev_git into RELEASE-3_0
2013-11-13 16:33:34 +11:00
39b841aee3
db5SICSUserGuideQuokka.xml is Katy Wood's document that has been manually
...
converted from a Word document to docbook, for integration into Gumtree
help, and to have under source control.
2013-11-13 16:28:36 +11:00
57b6dce6bf
- Added messagepipe.c
...
- Added initial version of sicsget. This is a more generalised way of
reading and writing SICS data wherever it is. The thing is extendable if
reading something the current way is to slow. This has both a C interface
and an interpreter interface.
2013-11-07 08:42:32 +00:00
d7311c6f68
- Added missing file epicscounter.c
...
SKIPPED:
psi/epicscounter.c
2013-11-04 15:03:03 +00:00
ad241bd99e
- Added a protocol driver for the munich sputter machine
...
- Added a multicountsersec to teplace hmcontrol and multicounter
- Fixed a case sensitivity bug in haddcheck
- Made oscillate work with second generation motors for POLDI
- Added a time stamper to trace. Now there will be time stamps in trace files which allow
to correlate things from the master log with the trace.
- Updated polterwrite.
- Updated testprot to work with the behave test
SKIPPED:
psi/make_gen
psi/polterwrite.c
psi/psi.c
psi/sputterprot.c
2013-11-04 12:55:15 +00:00
d35e7079a2
Copied modifications from ics1-platypus.
2013-10-29 09:06:57 +11:00
7bb1763da9
SICS-684 Add 'hmm astop' command to simulated hmm in script validator.
...
See SICS-638 for justification.
2013-10-29 09:16:54 +11:00
fa9ba68146
SICS-684 Stop the 'ERROR: option fat_clock_scale n' messages when running the script_validator.
2013-10-29 09:14:41 +11:00
95369d3454
Make naming scheme for west4100 temperature controller consistent with other drivers.
2013-10-28 15:33:44 +11:00
090d80e166
SICS-683 Add x_pixels_per_mm and y_pixels_per_mm parameters for Platypus.
2013-10-28 15:33:43 +11:00
c3fd00c079
Add west4100 to Taipan's sics_config.ini
2013-10-28 15:33:43 +11:00
4812644b66
Modify west4100 configuration to load the driver if it has been
...
selected in a sics_config.ini file.
2013-10-28 15:33:43 +11:00
296ddc9331
SICS-617 west4100 driver gets comms error in new version of SICS.
...
Revert change made by PSI in 7caade8
2013-10-28 15:33:42 +11:00
7a17be14ce
SICS-673 PLC: eValue must be used to set values in the TCL interpreter.
2013-10-28 15:33:42 +11:00
713ae0b263
SICS-504 Quokka beamstops:Try to get within 0.05 degrees of the target without raising an error.
2013-10-28 15:33:42 +11:00
b1ab4f8b1a
SICS-675: Change lens configuration for Quokka
2013-10-28 15:33:41 +11:00
6d9c5173ec
Make sure that the rank of the histmem dataset is always equal to the rank of the data + 1
...
even when the hmm object is marked as immutable.
2013-10-28 15:33:41 +11:00
e666d980fd
Don't use the SICS telnet port for the fake velocity selector.
2013-10-28 15:33:41 +11:00
cbcd98c10c
Manual copied from ANSTO branch and committed to RELEASE-3_0 branch.
...
This directory was accidentally omitted from the merge-release branch during the PSI code merge.
2013-10-28 11:22:59 +11:00
c1f724c246
Taipan: Enable the plc/SIS feedback in SICS
2013-10-18 18:13:51 +11:00
6277d3f7ad
Taipan: Reduce stepsperx on sample stage rotation to avoid overdriving it.
2013-10-18 18:13:01 +11:00
5914db28c3
Save the magnetic field value setpoint last set by SICS for the Oxford 12T magnet.
...
TODO:We should save the setpoint from the Labview program.
2013-10-18 18:11:35 +11:00
8ecf2f37a5
- inserted comments
...
SKIPPED:
psi/arrobj.c
2013-10-16 12:46:37 +00:00
131f06367f
- modified error message when offline
2013-10-16 12:46:21 +00:00
3366f21421
Taipan: Add LS370 and Mercury to sics_config.ini
2013-10-15 03:26:52 +11:00
ad3aa5cd3b
Use sics_config.ini to configure LS370, oxford ITC, oxford Mercury, and oxford labview drivers.
2013-10-15 03:25:22 +11:00
d4b782aae7
Remove hard coded magnet name from sensor path.
2013-10-15 03:23:10 +11:00
55e93c8386
Set a convenient default path for config ini file on ICS and ICS TEST hosts.
2013-10-15 03:08:23 +11:00
79cdd71a78
Taipan: set absencHome and limits for 12T magnet sample motor.
2013-10-15 03:06:52 +11:00
ffdd508bc8
Make sure that scans only save scratch files if called with 'savetype nosave'
2013-10-15 02:56:43 +11:00
653f113ecc
Quokka performance enhancements made by Dan Bartlett 12/09/13.
2013-10-15 02:24:00 +11:00
7c99ed7948
Configure 12T magnet motor as specified in Dan's email 18/9/13.
2013-09-24 07:57:20 +10:00
fd1e8a9737
Allow clients logged in with user rights to run the autosave command.
2013-09-23 23:43:40 +10:00
edf2ca93a3
Force updates of sicsvariables if the save command is called when counting in blocking mode.
...
This is needed to make autosave work during scans.
2013-09-23 23:43:05 +10:00
