6f2226fa40
Changes to Makefile for building on 64-bit RHEL
2014-07-30 11:40:47 +10:00
9b965e6313
Minimal scan.tcl and dingo_configuration.tcl
...
FIX: The scan fails to update the motor positions in the camera server meta data.
2014-07-28 10:10:18 +10:00
a7039c5ca0
Don't abort server_init if one of the initialisation commands fails.
2014-07-28 10:02:49 +10:00
a24afd1298
Modify test configuration for testing on Dingo.
...
The dingo_configuration.tcl could be based on this.
TODO: Move scan configuration to scan.tcl
2014-07-24 13:57:15 +10:00
29e17ba482
Report HWIdle to SICS if the camera driver has been reset via halt().
2014-07-24 13:53:35 +10:00
1707cba55f
Add debug parameter to Dingo camera driver.
2014-07-24 13:53:34 +10:00
67a3a198ac
Added command latch ready event and camera upload configuration event.
...
The camera driver will now upload the exposure time when it's called from a scan object.
The output function now returns events which are not targeted at the camera or SICS
so that they can be fed back into the state transition function.
The input event handler (camera.c:camdriv_input) now feeds output events back into the
transition function.
2014-07-24 13:53:34 +10:00
a62a284372
Define Echidna sics_config.ini with configurable sample stage.
2014-07-24 13:53:33 +10:00
972e3232cd
Change the names in all of the files
2014-07-23 17:30:44 +10:00
9c90153f37
Perform the rename
2014-07-23 17:14:18 +10:00
e04785f3a8
Code to generate the move/rename
2014-07-23 17:14:13 +10:00
dda4a0f8f6
Fix erroneous filenames that match other files
2014-07-23 16:20:34 +10:00
dedcc49284
Fix erroneous filenames that match other files
2014-07-23 16:20:22 +10:00
e3b583150e
SICS-696 Explicity include the namespace on mk_sct_ calls
2014-07-23 14:32:26 +10:00
16b435befe
Fix an unbalanced brace
2014-07-23 14:27:50 +10:00
8d4366fa95
Change newserver to a link to server_date_time in deploySICS
2014-07-21 15:50:43 +10:00
001d41a703
Change newserver to a link to server_date_time in deploySICS
2014-07-21 15:34:18 +10:00
ab3d7c5adf
Remove explicit test debug_threshold from SCT files and regenerate
2014-07-21 10:58:01 +10:00
b9f67a2562
Fix saving t0_chopper_freq and tof length values.
2014-07-20 21:42:36 +10:00
3d051f5bb9
Update aperture positions from Bilby spreadsheet.
2014-07-20 21:29:48 +10:00
c992ae0a2c
Refactor aperture selection and report aperture positions at end of drive.
...
Improve feedback.
2014-07-20 21:29:19 +10:00
b9b386e3f6
Capture error messages in prun and pdrive.
2014-07-20 20:49:20 +10:00
1d1f102b08
- Fixed a serious bug in interface.c introduced while cleaning SetStatus
2014-07-18 15:50:04 +02:00
f5e797dd6a
- Cleaned all old dtatus setting code
2014-07-18 14:02:57 +02:00
0becbe914a
Use the sct_pulser sctcontroller generated from the agilent_33220A.sct wrapper.
2014-07-18 15:54:59 +10:00
9752c6dbaf
Fix list of apertures which should be raised before moving guides.
...
Optimise aperture selection.
2014-07-18 14:33:16 +10:00
b5b8b32788
Don't report non-numeric values on Ltof hdb nodes.
...
This also eliminates logging type violation errors caused by polling of the hdb nodes when the guides are misaligned.
Make sure that aprrest_list is empty when N = 8
Improved argument checking and optimisations.
Also allow for setting an offset to the aperture positions on initialisation.
This was found to be necessary after the encoders were replace and ap2 upperlimit
was found to be lower than the ap2 topmost position for an aperture.
2014-07-18 00:16:27 +10:00
17c212ee2e
Merge branch 'RELEASE-3_1' into RELEASE-3_2
2014-07-17 11:55:26 +10:00
bffd3ae130
Workaround for SICS-596 'histmem loadconf' fails while histogram is running.
...
The hmm init was being issued before the histogram had actually stopped.
2014-07-17 11:01:18 +10:00
0cc126572d
nguide now selects apertures as well as guides.
2014-07-17 09:44:56 +10:00
b5c64c2a03
Add convenience commands prun and pdrive for posit motors.
2014-07-17 09:44:18 +10:00
22c701b816
Fix LS340 tc driveable by setting the right value for the model number.
2014-07-17 08:55:19 +10:00
423244858e
Added t0_chopper_freq for Bilby.
2014-07-16 15:02:49 +10:00
3d6488e254
Rename blade to disk for Bilby choppers.
2014-07-16 15:02:18 +10:00
b217eb0dcf
Add whatsthere.py to check revs on instruments
2014-07-16 12:57:33 +10:00
d698c302fd
Merge branch 'RELEASE-3_1' into temp
...
Conflicts:
sics/site_ansto/instrument/config/environment/temperature/julabo_lh45.sct
sics/site_ansto/instrument/util/config_edit.py
sics/site_ansto/instrument/util/gen_sct.py
2014-07-16 12:56:40 +10:00
0e53fe3757
Save 5T magnet sensor reading and setpoint.
2014-07-16 11:27:13 +10:00
de264c5f02
Update 5T magnet driver name in Quokka sics_config.ini
2014-07-16 10:11:37 +10:00
c03bbdc38e
Add permlink to 5T magnet driver and load the driver in the quokka config.
2014-07-16 10:11:07 +10:00
b29eecc549
Use V1 with I1 for autolab setup on wombat
2014-07-16 09:28:26 +10:00
6a47bd9441
Merge branch 'master' into status
2014-07-15 16:46:22 +02:00
db6167bfa1
- Removed old stuff in conman
...
- Fixed a bug in processnode which hangs SICS when processnode is called from multiple
clients on the same node
- Fixed a bug in multicountsersec which caused thrashing of the Tcl results which caused ugly
error messages when calling the transfer script. Now a copy of the connection is made
before calling the transfer script
2014-07-15 16:43:09 +02:00
fd7d369ea2
Julabo sct driver to use @@NOREPLY@@
2014-07-15 18:52:09 +10:00
acec319ee3
Zeroing rotary encoder motor steps fix
2014-07-15 18:52:05 +10:00
db24e03106
Add sct driver for New Zealand magnet
2014-07-15 18:48:38 +10:00
22b34395c1
SICS-761 Zero the motor step counter for rotary encoders.
2014-07-15 18:48:38 +10:00
8849dc90c5
SICS-760 Add NOREPLY mechanism in aqadapter and asyncqueue
...
This removes the expectation of a reply when sending is suffixed
with "{0}" or "@@NOREPLY@@" or, for asyncqueue, a custom string.
2014-07-15 18:48:38 +10:00
994f4a48c1
Add 5T New Zealand magnet configuration to Quokka configuration.
2014-07-15 17:30:51 +10:00
739ab393a5
Add an Autolab setup to the Wombat config and fix the mercury configuration.
2014-07-15 15:20:20 +10:00
4996d84187
Set an @description property on the protek sensor reading.
2014-07-15 15:17:59 +10:00
