- use dig for resolving host names
- ascon.c: fix terminator parsing
- property callback: change property before callback
- logger.c:default for logger period must be the old value instead of 1
- add frappy type history writing
- increase max. logreader line length
- HIPNONE returns "null" with json protocol
- encode strings properly in formatNameValue
- fix memory leak in json2tcl
- scriptcontext: do not show debug messages when script starts with underscore or when the "send" property is empty
- scriptcontext: remove args for action timestamp
- scriptcontext: "que" function will replace an already queued action, e.g. for 'halt
- introduced updatestatus script
- Added a processnode methos to scriptcontext. processnode waits for the
scriptchain of a node to finish.
- Fixed a bug in sicsget
- Made histmemsec dim and rank manager privilege. To allow chnage at runtime.
Is required for SANS
- Fixed some issues with multicountersec, mostly relating to passing things through
in a sensible way.
- Updated motorsec.c to work with a client based driver
SKIPPED:
psi/polterwrite.c
psi/tabledrive.c
psi/tabledrive.h
- Added a multicountsersec to teplace hmcontrol and multicounter
- Fixed a case sensitivity bug in haddcheck
- Made oscillate work with second generation motors for POLDI
- Added a time stamper to trace. Now there will be time stamps in trace files which allow
to correlate things from the master log with the trace.
- Updated polterwrite.
- Updated testprot to work with the behave test
SKIPPED:
psi/make_gen
psi/polterwrite.c
psi/psi.c
psi/sputterprot.c
- In support of HMsec, allow the count command in countsec to run without a
preset parameter. If this is missing the old, stored preset is used.
- Removed a check which causes initialisation of the HM from a batch file fail
for POLDI
- fixed @nl@ encoding of \n problem with certain kinds of batch files generated by GTSE
- Fixed a bug with summing on hitsmemsec. nxdataset now uses 64 bit int for dimensions.
- Fixed motorsec to remove itself properly from a parent when linked. Please note
that there is still the limitation that a second generation motor can only be linked
once in a Hipadaba tree
- Extended subsampling a HM for second generation HM
- Added a hscriptnotify. This calls a script on the update of a node
- POLDI has been rebuilt, chnages to data file writing
- For testing, sinqhttopt now understands a special command, byteswapoff,
which switches off byte swapping. Required when the HM ius run on an Intel box.
SKIPPED:
psi/polterwrite.c
psi/sinqhttpopt.c
- Added error fields to hwardware objects: motor, counter, histmem
- Optimised sinqhttpopt
- Added haddcheck which adds checks to hipadaba nodes. The current implementation
only checks for selctions agaisnt the values property. Expand when more checks are
required.
SKIPPED:
psi/polterwrite.c
psi/sinqhttpopt.c
psi/tasinit.c
- Fixed some issues with error returns not being properly handled in devexec
- Fixed a bug in motorlist which caused limit checks to fail
- Fixed an issue with the TDCHM not properly updating the counter
values on finish
- Readded getHipadabaPar in ChainCallback as this caused a problem in ei
- Made tasdrive ignore sgu, sgl when out of plane not allowed
SKIPPED:
psi/eigermono.c
psi/sinqhttp.c
psi/tdchm.c
- Modifed many modules using histmem to work also with histmemsec
- Extended tasker with task names and task groups
- There is a new taskobj which allows to list tasks and to interact with them.
- Task now supports running Tcl functions as tasks
- There is a new experimental sctcomtask module which allows to define communication
tasks against a scriptcontext. This is a new feature which should facilitate
writing sequential scripts using asynchronous communication.
- A fix to make spss7 work when there are no switches
- ORION support for single X. TRICS measures crystals hanging down, ORION
standing up
SKIPPED:
psi/ease.c
psi/faverage.c
psi/jvlprot.c
psi/make_gen
psi/pardef.c
psi/polterwrite.c
psi/psi.c
psi/sinq.c
psi/spss7.c
- Added a staticoffset to motorsec.c in order to allow the use of softzero
for physics purposes.
- When a triple axis motor fails to start, the whole shit needs to be stopped.
This has now been implemented into tasdrive.c
- There were crashes in adding NB reflections to a reflection list. This has
been fixed.
- Removed generation of incommenurate reflections for 0,0,0 in fourmess.c
- Implemented a Poch command for heartbeats
- Fixed 64 bit dimension issues in nxdict
- Fixed different calling conventions for NXReportError deep stack in nxdict
- Stopped ei motor driving when not necessary
- Added yet another monitor for POLDI
- Added a protocoll driver for the JVL motor RS-485 binary protocoll
- Fixed some reporting issues
SKIPPED:
psi/jvlprot.c
psi/make_gen
psi/polterwrite.c
psi/psi.c
psi/spss7.c
- New NeXus libraries
- Added new raw binary transfer mode for mass data
- Added a check script option to configurable virtual motor
SKIPPED:
psi/dumprot.c
psi/make_gen
psi/psi.c
psi/rebin.c
psi/sanslirebin.c
- Fixed ei interrupt bug in tasdrive.c
- Made eiger A2 driving work
- Added force start facility to devexec for POLDI HV
SKIPPED:
psi/eigera2.c
psi/polterwrite.c
did not have enough counts
- Reduced polling frequency in emon
- Fixed a scriptcontext bug which would cause it to dump core in SctTransact
on interrupts
- Fixed an issue with missing <nl> at the end of batch files
- Added a feature which does not call halt when counting stops in hmcontrol.c
This is necessary for the BOA CCD
- Initalized doNotFree properly in hipadaba.c
- Added the travelling salesman reflection measurement algorithm
- Added another component to amorset
- Removed old SicsWait from nserver.c
- Added a means to nxscript to write 16 bit data for BOA
- Modified tasub to accept a drivabel as a motor and not only a motor.
This became necessary to make EIGER work as A2 on EIGER is a virtual
motor
SKIPPED:
psi/amorcomp.h
psi/amordrive.h
psi/amorset.c
psi/amorset.h
psi/amorset.tex
psi/amorset.w
psi/el734hp.c
psi/el737hpdriv.c
psi/make_gen
psi/pardef.c
psi/polterwrite.c
psi/psi.c
psi/sinqhttpopt.c
- Added missing cnvrt files, stolen from Markus
- Debugged the new sinqhttpopt driver for SINQ HTTP HM
- Debugged the driver for the new S7 Siemens SPS
- Added handling of hexadecimal terminators to ascon.c
- Increased the write buffer size in asynnet again
- Fixed a core dump in lld.c
- Added writing of second gen HM to nxscript.c
- Added doubletime command to SICS
- Fixed a core dump issue in sicshdbadapter.c on dimension changes
- Modified sicsobj to look for lower case keys too
SKIPPED:
psi/cnvrt.c
psi/cnvrt.h
psi/el734hp.c
psi/make_gen
psi/sinqhttpopt.c
psi/sinqhttpprot.c
psi/spss7.c
psi/swmotor.c
- Added a warning for excessive data rates on monitors
- Added statistics to devser and thus to scriptcontext
- Added byte concatenation to dynstring
- Added aborting for reflection generation to fourmess.c
- Added data checksum testing to hipadaba, use for update tests
- Fixed interrupt discovery in network.c, caused invalid interrupt
codes which in turn confused sicscron which had to be fixed too.
- Renamed ubcalc into ubcalcint in order to reclaim the ubcalc for Jurg
- Added an a3offset to tasub in order to fix what I perceive an IS problem
- Added support for the newer version of the Siemens SPS, the S7
- Added a not yet fully working sinqhttpopt driver which talks to
http HM without libghttp
SKIPPED:
psi/delcam.c
psi/make_gen
psi/psi.c
psi/sinq.c
psi/sinq.h
psi/sinqhttpopt.c
psi/slsvme.c
psi/spss7.c
- Fixed a stack overrun bug in macro.c
- Fixed a killing bug in devser.c
- Added node writing with offset to nxscript.c
- Wrote a simulation driver for second generation HM's
- Readded devexec commands to SICS
- Readded Hipadaba initialisation to SICS
- Fixed a bug in sinqhttprot.c which is triggered when a reconnect happens
during a node based download of data.
SKIPPED:
psi/sinqhttpprot.c
to fourmess
- Fixed hdbtable, reflist and tasub up to work with GTSE
- Made TRICS do fast scans again
- Added support for SANS beam center calculations
- Fixed a bug where SICS apparently did double counting but in fact
just omitted an error message and did not
- Added the harray command
- Implemented the desired run/drive behaviour: drive waits for what it started
run starts, and success waits for everything to finish. This required
changes to a lot of files.
- Fixed a bug in remob which supressed required messages
