fixed dilsc, fist try before tests

Change-Id: Iaac5f07c27879c7c17be2e25defde19e9ddd1566

cfg/dilsc_cfg.py

@@ -0,0 +1,231 @@
+Node('cfg/dilsc1.cfg',
+     'triton test',
+     interface='5000',
+     name='dilsc1',
+)
+
+Mod('triton',
+    'frappy_psi.mercury.IO',
+    'connection to triton software',
+    uri='tcp://192.168.2.33:33576',
+)
+
+Mod('T_mix',
+    'frappy_psi.triton.TemperatureSensor',
+    'mix. chamber temperature',
+    slot='T8',
+    io='triton',
+)
+
+Mod('T_pt2head',
+    'frappy_psi.triton.TemperatureSensor',
+    'PTR2 head temperature',
+    slot='T1',
+    io='triton',
+)
+
+Mod('T_pt2plate',
+    'frappy_psi.triton.TemperatureSensor',
+    'PTR2 plate temperature',
+    slot='T2',
+    io='triton',
+)
+
+Mod('T_still',
+    'frappy_psi.triton.TemperatureSensor',
+    'still temperature',
+    slot='T3',
+    io='triton',
+)
+
+Mod('htr_still',
+    'frappy_psi.triton.HeaterOutput',
+    'still heater',
+    slot='H2',
+    io='triton',
+)
+
+Mod('T_coldpl',
+    'frappy_psi.triton.TemperatureSensor',
+    'cold plate temperature',
+    slot='T4',
+    io='triton',
+)
+
+Mod('T_mixcx',
+    'frappy_psi.triton.TemperatureSensor',
+    'mix. chamber cernox',
+    slot='T5',
+    io='triton',
+)
+
+Mod('T_pt1head',
+    'frappy_psi.triton.TemperatureSensor',
+    'PTR1 head temperature',
+    slot='T6',
+    io='triton',
+)
+
+Mod('T_pt1plate',
+    'frappy_psi.triton.TemperatureSensor',
+    'PTR1 plate temperature',
+    slot='T7',
+    io='triton',
+)
+
+Mod('T_pucksensor',
+    'frappy_psi.triton.TemperatureLoop',
+    'puck sensor temperature',
+    output_module='htr_pucksensor',
+    slot='TA',
+    io='triton',
+)
+
+Mod('htr_pucksensor',
+    'frappy_psi.triton.HeaterOutputWithRange',
+    'mix. chamber heater',
+    slot='H1,TA',
+    io='triton',
+)
+
+Mod('T_magnet',
+    'frappy_psi.triton.TemperatureSensor',
+    'magnet temperature',
+    slot='T13',
+    io='triton',
+)
+
+Mod('action',
+    'frappy_psi.triton.Action',
+    'higher level scripts',
+    io='triton',
+    slot='DR',
+)
+
+Mod('p_dump',
+    'frappy_psi.mercury.PressureSensor',
+    'dump pressure',
+    slot='P1',
+    io='triton',
+)
+
+Mod('p_cond',
+    'frappy_psi.mercury.PressureSensor',
+    'condenser pressure',
+    slot='P2',
+    io='triton',
+)
+
+Mod('p_still',
+    'frappy_psi.mercury.PressureSensor',
+    'still pressure',
+    slot='P3',
+    io='triton',
+)
+
+Mod('p_fore',
+    'frappy_psi.mercury.PressureSensor',
+    'pressure on the pump side',
+    slot='P5',
+    io='triton',
+)
+
+Mod('p_back',
+    'frappy_psi.mercury.PressureSensor',
+    'pressure on the back side of the pump',
+    slot='P4',
+    io='triton',
+)
+
+Mod('p_ovc',
+    'frappy_psi.mercury.PressureSensor',
+    'outer vacuum pressure',
+    slot='P6',
+    io='triton',
+)
+
+Mod('V1',
+    'frappy_psi.triton.Valve',
+    'valve V1',
+    slot='V1',
+    io='triton',
+)
+
+Mod('V2',
+    'frappy_psi.triton.Valve',
+    'valve V2',
+    slot='V2',
+    io='triton',
+)
+
+Mod('V4',
+    'frappy_psi.triton.Valve',
+    'valve V4',
+    slot='V4',
+    io='triton',
+)
+
+Mod('V5',
+    'frappy_psi.triton.Valve',
+    'valve V5',
+    slot='V5',
+    io='triton',
+)
+
+Mod('V9',
+    'frappy_psi.triton.Valve',
+    'valve V9',
+    slot='V9',
+    io='triton',
+)
+
+Mod('ips',
+    'frappy_psi.mercury.IO',
+    'IPS for magnet',
+    uri='192.168.127.254:3001',
+)
+
+Mod('mf',
+    'frappy_psi.dilsc.VectorField',
+    'vector field',
+    x='mfx',
+    y='mfy',
+    z='mfz',
+    sphere_radius=0.6,
+    cylinders=((0.23, 5.2), (0.45, 0.8)),
+)
+
+Mod('mfx',
+    'frappy_psi.ips_mercury.SimpleField',
+    'magnetic field, x-axis',
+    slot='GRPX',
+    io='ips',
+    tolerance=0.0001,
+    wait_stable_field=0.0,
+    nunits=2,
+    target=Param(max=0.6),
+    ramp=0.225,
+)
+
+Mod('mfy',
+    'frappy_psi.ips_mercury.SimpleField',
+    'magnetic field, y axis',
+    slot='GRPY',
+    io='ips',
+    tolerance=0.0001,
+    wait_stable_field=0.0,
+    nunits=2,
+    target=Param(max=0.6),
+    ramp=0.225,
+)
+
+Mod('mfz',
+    'frappy_psi.ips_mercury.Field',
+    'magnetic field, z-axis',
+    slot='GRPZ',
+    io='ips',
+    tolerance=0.0001,
+    target=Param(max=5.2),
+    mode='DRIVEN',
+    ramp=0.52,
+)

frappy/client/__init__.py

@@ -282,6 +282,7 @@ class SecopClient(ProxyClient):
         self.nodename = uri
         self._lock = RLock()
         self._shutdown = Event()
+        self.cleanup = []
 
     def __del__(self):
         try:
@@ -297,6 +298,10 @@ class SecopClient(ProxyClient):
         with self._lock:
             if self.io:
                 return
+            self.txq = queue.Queue(30)
+            self.pending = queue.Queue(30)
+            self.active_requests.clear()
+            self.cleanup.clear()
             if self.online:
                 self._set_state(True, 'reconnecting')
             else:
@@ -368,6 +373,12 @@ class SecopClient(ProxyClient):
         noactivity = 0
         try:
             while self._running:
+                while self.cleanup:
+                    entry = self.cleanup.pop()
+                    for key, prev in self.active_requests.items():
+                        if prev is entry:
+                            self.active_requests.pop(key)
+                            break
                 # may raise ConnectionClosed
                 reply = self.io.readline()
                 if reply is None:
@@ -405,6 +416,14 @@ class SecopClient(ProxyClient):
                             self.updateValue(module, param, value, timestamp, readerror)
                         except KeyError:
                             pass  # ignore updates of unknown parameters
+                        except Exception as e:
+                            self.log.debug(f'error when updating %s:%s %r', module, param, value)
+                            try:
+                                # catch errors in callback functions
+                                self.updateValue(module, param, None, timestamp,
+                                                 type(e)(f'{e} - raised on client side'))
+                            except Exception as ee:
+                                self.log.warn(f'can not handle error update %r for %s:%s: %r', e, module, param, ee)
                         if action in (EVENTREPLY, ERRORPREFIX + EVENTREPLY):
                             continue
                 try:
@@ -591,8 +610,10 @@ class SecopClient(ProxyClient):
     def get_reply(self, entry):
         """wait for reply and return it"""
         if not entry[1].wait(10):  # event
+            self.cleanup.append(entry)
             raise TimeoutError('no response within 10s')
         if not entry[2]:  # reply
+            # no cleanup needed as self.active_requests will be cleared on connect
             raise ConnectionError('connection closed before reply')
         action, _, data = entry[2]  # pylint: disable=unpacking-non-sequence
         if action.startswith(ERRORPREFIX):

frappy/gui/inputwidgets.py

@@ -1,6 +1,10 @@
-from frappy.gui.qt import QCheckBox, QComboBox, QLineEdit, pyqtSignal
+import sys
 
-from frappy.datatypes import BoolType, EnumType
+from frappy.gui.qt import QCheckBox, QComboBox, QDoubleSpinBox, QLineEdit, \
+    QSpinBox, pyqtSignal
+
+from frappy.datatypes import BoolType, EnumType, FloatRange, IntRange, \
+    StringType, TextType
 
 # ArrayOf, BLOBType, FloatRange, IntRange, StringType, StructOf, TextType, TupleOf
 
@@ -9,11 +13,24 @@ def get_input_widget(datatype, parent=None):
     return {
         EnumType: EnumInput,
         BoolType: BoolInput,
+        IntRange: IntInput,
+        StringType: StringInput,
+        TextType: StringInput,
     }.get(datatype.__class__, GenericInput)(datatype, parent)
 
 
-class GenericInput(QLineEdit):
+class InputBase:
     submitted = pyqtSignal()
+    input_feedback = pyqtSignal(str)
+
+    def get_input(self):
+        raise NotImplementedError
+
+    def submit(self):
+        self.submitted.emit()
+
+
+class GenericInput(InputBase, QLineEdit):
     def __init__(self, datatype, parent=None):
         super().__init__(parent)
         self.datatype = datatype
@@ -23,12 +40,28 @@ class GenericInput(QLineEdit):
     def get_input(self):
         return self.datatype.from_string(self.text())
 
-    def submit(self):
-        self.submitted.emit()
+
+class StringInput(GenericInput):
+    def __init__(self, datatype, parent=None):
+        super().__init__(datatype, parent)
 
 
-class EnumInput(QComboBox):
-    submitted = pyqtSignal()
+class IntInput(InputBase, QSpinBox):
+    def __init__(self, datatype, parent=None):
+        super().__init__(parent)
+        self.datatype = datatype
+        # we dont use setMaximum and setMinimum because it is quite restrictive
+        # when typing, so set it as high as possible
+        self.setMaximum(2147483647)
+        self.setMinimum(-2147483648)
+
+        self.lineEdit().returnPressed.connect(self.submit)
+
+    def get_input(self):
+        return self.datatype(self.value())
+
+
+class EnumInput(InputBase, QComboBox):
     def __init__(self, datatype, parent=None):
         super().__init__(parent)
         self.setPlaceholderText('choose value')
@@ -45,18 +78,11 @@ class EnumInput(QComboBox):
     def get_input(self):
         return self._map[self.currentIndex()].value
 
-    def submit(self):
-        self.submitted.emit()
 
-
-class BoolInput(QCheckBox):
-    submitted = pyqtSignal()
+class BoolInput(InputBase, QCheckBox):
     def __init__(self, datatype, parent=None):
         super().__init__(parent)
         self.datatype = datatype
 
     def get_input(self):
         return self.isChecked()
-
-    def submit(self):
-        self.submitted.emit()

frappy/gui/modulewidget.py

@@ -24,9 +24,9 @@ from frappy.gui.qt import QColor, QDialog, QHBoxLayout, QIcon, QLabel, \
     QLineEdit, QMessageBox, QPropertyAnimation, QPushButton, Qt, QToolButton, \
     QWidget, pyqtProperty, pyqtSignal
 
+from frappy.gui.inputwidgets import get_input_widget
 from frappy.gui.util import Colors, loadUi
 from frappy.gui.valuewidgets import get_widget
-from frappy.gui.inputwidgets import get_input_widget
 
 
 class CommandDialog(QDialog):
@@ -54,7 +54,11 @@ class CommandDialog(QDialog):
         self.resize(self.sizeHint())
 
     def get_value(self):
-        return True, self.widgets[0].get_value()
+        try:
+            return self.widgets[0].get_value()
+        except Exception as e:
+            QMessageBox.warning(self.parent(), 'Operation failed', str(e))
+            return None
 
     def exec(self):
         if super().exec():
@@ -95,8 +99,9 @@ class CommandButton(QPushButton):
         if self._argintype:
             dlg = CommandDialog(self._cmdname, self._argintype)
             args = dlg.exec()
-            if args:  # not 'Cancel' clicked
-                self._cb(self._cmdname, args[1])
+            if args is not None:
+                # no errors when converting value and 'Cancel' wasn't clicked
+                self._cb(self._cmdname, args)
         else:
             # no need for arguments
             self._cb(self._cmdname, None)
@@ -442,8 +447,8 @@ class ModuleWidget(QWidget):
         self.paramDetails.emit(self._name, param)
 
     def _button_pressed(self, param):
-        target = self._paramInputs[param].get_input()
         try:
+            target = self._paramInputs[param].get_input()
             self._node.setParameter(self._name, param, target)
         except Exception as e:
             QMessageBox.warning(self.parent(), 'Operation failed', str(e))

frappy/gui/qt.py

@@ -42,10 +42,10 @@ try:
         QDialogButtonBox, QDoubleSpinBox, QFileDialog, QFrame, QGridLayout, \
         QGroupBox, QHBoxLayout, QInputDialog, QLabel, QLineEdit, QMainWindow, \
         QMenu, QMessageBox, QPlainTextEdit, QPushButton, QRadioButton, \
-        QScrollArea, QSizePolicy, QSpacerItem, QSpinBox, QStyle, \
+        QScrollArea, QSizePolicy, QSlider, QSpacerItem, QSpinBox, QStyle, \
         QStyleOptionTab, QStylePainter, QTabBar, QTabWidget, QTextEdit, \
         QToolButton, QTreeView, QTreeWidget, QTreeWidgetItem, QVBoxLayout, \
-        QWidget,QSlider
+        QWidget
 
     import frappy.gui.resources_qt6
 
@@ -62,9 +62,9 @@ except ImportError as e:
         QDialog, QDialogButtonBox, QDoubleSpinBox, QFileDialog, QFrame, \
         QGridLayout, QGroupBox, QHBoxLayout, QInputDialog, QLabel, QLineEdit, \
         QMainWindow, QMenu, QMessageBox, QPlainTextEdit, QPushButton, \
-        QRadioButton, QScrollArea, QShortcut, QSizePolicy, QSpacerItem, \
-        QSpinBox, QStyle, QStyleOptionTab, QStylePainter, QTabBar, \
-        QTabWidget, QTextEdit, QToolButton, QTreeView, QTreeWidget, \
-        QTreeWidgetItem, QVBoxLayout, QWidget, QSlider
+        QRadioButton, QScrollArea, QShortcut, QSizePolicy, QSlider, \
+        QSpacerItem, QSpinBox, QStyle, QStyleOptionTab, QStylePainter, \
+        QTabBar, QTabWidget, QTextEdit, QToolButton, QTreeView, QTreeWidget, \
+        QTreeWidgetItem, QVBoxLayout, QWidget
 
     import frappy.gui.resources_qt5

frappy/modulebase.py

@@ -592,7 +592,7 @@ class Module(HasAccessibles):
                 if not self.io.triggerPoll:
                     # when self.io.enablePoll is False, triggerPoll is not
                     # created for self.io in the else clause below
-                    self.triggerPoll = threading.Event()
+                    self.io.triggerPoll = threading.Event()
             else:
                 self.triggerPoll = threading.Event()
                 self.polledModules.append(self)

frappy/params.py

@@ -98,6 +98,16 @@ class Accessible(HasProperties):
             props.append(f'{k}={v!r}')
         return f"{self.__class__.__name__}({', '.join(props)})"
 
+    def fixExport(self):
+        if self.export is True:
+            predefined_cls = PREDEFINED_ACCESSIBLES.get(self.name)
+            if predefined_cls is None:
+                self.export = '_' + self.name
+            elif isinstance(self, predefined_cls):
+                self.export = self.name
+            else:
+                raise ProgrammingError(f'can not use {self.name!r} as name of a {type(self).__name__}')
+
 
 class Parameter(Accessible):
     """defines a parameter
@@ -225,18 +235,7 @@ class Parameter(Accessible):
         self.name = name
         if isinstance(self.datatype, EnumType):
             self.datatype.set_name(name)
-
-        if self.export is True:
-            predefined_cls = PREDEFINED_ACCESSIBLES.get(self.name, None)
-            if predefined_cls is Parameter:
-                self.export = self.name
-            elif predefined_cls is None:
-                self.export = '_' + self.name
-            else:
-                raise ProgrammingError(f'can not use {self.name!r} as name of a Parameter')
-            if 'export' in self.ownProperties:
-                # avoid export=True overrides export=<name>
-                self.ownProperties['export'] = self.export
+        self.fixExport()
 
     def clone(self, properties, **kwds):
         """return a clone of ourselfs with inherited properties"""
@@ -280,7 +279,7 @@ class Parameter(Accessible):
 
         :param modobj: final call, called from Module.__init__
         """
-
+        self.fixExport()
         if self.constant is not None:
             constant = self.datatype(self.constant)
             # The value of the `constant` property should be the
@@ -407,18 +406,8 @@ class Command(Accessible):
         if self.func is None:
             raise ProgrammingError(f'Command {owner.__name__}.{name} must be used as a method decorator')
 
+        self.fixExport()
         self.datatype = CommandType(self.argument, self.result)
-        if self.export is True:
-            predefined_cls = PREDEFINED_ACCESSIBLES.get(name, None)
-            if predefined_cls is Command:
-                self.export = name
-            elif predefined_cls is None:
-                self.export = '_' + name
-            else:
-                raise ProgrammingError(f'can not use {name!r} as name of a Command') from None
-            if 'export' in self.ownProperties:
-                # avoid export=True overrides export=<name>
-                self.ownProperties['export'] = self.export
         if not self._inherit:
             for key, pobj in self.properties.items():
                 if key not in self.propertyValues:
@@ -455,6 +444,7 @@ class Command(Accessible):
         """return a clone of ourselfs with inherited properties"""
         res = type(self)(**kwds)
         res.name = self.name
+        self.fixExport()
         res.func = self.func
         res.init(properties)
         res.init(res.ownProperties)

frappy/protocol/dispatcher.py

@@ -47,9 +47,11 @@ def make_update(modulename, pobj):
     if pobj.readerror:
         return (ERRORPREFIX + EVENTREPLY, f'{modulename}:{pobj.export}',
                 # error-report !
-                [pobj.readerror.name, str(pobj.readerror), {'t': pobj.timestamp}])
+                [pobj.readerror.name, str(pobj.readerror),
+                 {'t': pobj.timestamp} if pobj.timestamp else {}])
     return (EVENTREPLY, f'{modulename}:{pobj.export}',
-            [pobj.export_value(), {'t': pobj.timestamp}])
+            [pobj.export_value(),
+             {'t': pobj.timestamp} if pobj.timestamp else {}])
 
 
 class Dispatcher:

frappy/protocol/interface/handler.py

@@ -0,0 +1,237 @@
+# *****************************************************************************
+# This program is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 2 of the License, or (at your option) any later
+# version.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#
+# Module authors:
+#   Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
+#   Markus Zolliker <markus.zolliker@psi.ch>
+#
+# *****************************************************************************
+"""The common parts of the SECNodes outside interfaces"""
+
+import sys
+import threading
+
+from frappy.errors import SECoPError
+from frappy.lib import formatException, formatExtendedStack, \
+    formatExtendedTraceback
+from frappy.protocol.messages import ERRORPREFIX, HELPREPLY, HELPREQUEST, \
+    HelpMessage
+
+
+class DecodeError(Exception):
+    def __init__(self, message, raw_msg):
+        super().__init__(message)
+        self._raw_msg = raw_msg
+
+    @property
+    def raw_msg(self):
+        return self._raw_msg
+
+
+class ConnectionClose(Exception):
+    """Indicates that receive quit due to an error."""
+
+
+class RequestHandler:
+    """Base class for the request handlers.
+
+    This is an extended copy of the BaseRequestHandler from socketserver.
+
+    To make a new interface, implement these methods:
+        ingest, next_message, decode_message, receive, send_reply and format
+    and extend (override) setup() and finish() if needed.
+
+    For an example, have a look at TCPRequestHandler.
+    """
+
+    # Methods from BaseRequestHandler
+    def __init__(self, request, client_address, server):
+        self.request = request
+        self.client_address = client_address
+        self.server = server
+        self.log = None
+
+        try:
+            self.setup()
+            self.handle()
+        except Exception:
+            if self.log:
+                self.log.error(formatException())
+            else:
+                server.log.error(formatException())
+        finally:
+            self.finish()
+
+    def setup(self):
+        self.log = self.server.log
+        self.log.info("new connection %s",  self.format())
+        # notify dispatcher of us
+        self.server.dispatcher.add_connection(self)
+        self.send_lock = threading.Lock()
+        self.running = True
+        # overwrite this with an appropriate buffer if needed
+        self.data = None
+
+    def handle(self):
+        """handle a new connection"""
+        # copy state info
+        serverobj = self.server
+        # copy relevant settings from Interface
+        detailed_errors = serverobj.detailed_errors
+
+        # start serving
+        while self.running:
+            try:
+                newdata = self.receive()
+                if newdata is None:
+                    # no new data during read, continue
+                    continue
+                self.ingest(newdata)
+            except ConnectionClose:
+                # either normal close or error in receive
+                return
+            # put data into (de-) framer,
+            # de-frame data with next_message() and decode it
+            # call dispatcher.handle_request(self, message)
+            # dispatcher will queue the reply before returning
+            while self.running:
+                try:
+                    msg = self.next_message()
+                    if msg is None:
+                        break  # no more messages to process
+                except DecodeError as err:
+                    # we have to decode 'origin' here
+                    # use latin-1, as utf-8 or ascii may lead to encoding errors
+                    msg = err.raw_msg.decode('latin-1').split(' ', 3) + [
+                        None
+                    ]  # make sure len(msg) > 1
+                    result = (
+                        ERRORPREFIX + msg[0],
+                        msg[1],
+                        [
+                            'InternalError', str(err),
+                            {
+                                'exception': formatException(),
+                                'traceback': formatExtendedStack()
+                            }
+                        ]
+                    )
+                    print('--------------------')
+                    print(formatException())
+                    print('--------------------')
+                    print(formatExtendedTraceback(sys.exc_info()))
+                    print('====================')
+                else:
+                    try:
+                        if msg[0] == HELPREQUEST:
+                            self.handle_help()
+                            result = (HELPREPLY, None, None)
+                        else:
+                            result = serverobj.dispatcher.handle_request(self,
+                                                                         msg)
+                    except SECoPError as err:
+                        result = (
+                            ERRORPREFIX + msg[0],
+                            msg[1],
+                            [
+                                err.name,
+                                str(err),
+                                {
+                                    'exception': formatException(),
+                                    'traceback': formatExtendedStack()
+                                }
+                            ]
+                        )
+                    except Exception as err:
+                        # create Error Obj instead
+                        result = (
+                            ERRORPREFIX + msg[0],
+                            msg[1],
+                            [
+                                'InternalError',
+                                repr(err),
+                                {
+                                    'exception': formatException(),
+                                    'traceback': formatExtendedStack()
+                                }
+                            ]
+                        )
+                        print('--------------------')
+                        print(formatException())
+                        print('--------------------')
+                        print(formatExtendedTraceback(sys.exc_info()))
+                        print('====================')
+
+                if not result:
+                    self.log.error('empty result upon msg %s', repr(msg))
+                if result[0].startswith(ERRORPREFIX) and not detailed_errors:
+                    # strip extra information
+                    result[2][2].clear()
+                self.send_reply(result)
+
+    def handle_help(self):
+        for idx, line in enumerate(HelpMessage.splitlines()):
+            # not sending HELPREPLY here, as there should be only one reply for
+            # every request
+            self.send_reply(('_', f'{idx + 1}', line))
+
+    def finish(self):
+        """called when handle() terminates, i.e. the socket closed"""
+        self.log.info('closing connection %s', self.format())
+        # notify dispatcher
+        self.server.dispatcher.remove_connection(self)
+
+    # Methods for implementing in derived classes:
+    def ingest(self, newdata):
+        """Put the new data into the buffer."""
+        raise NotImplementedError
+
+    def next_message(self):
+        """Get the next decoded message from the buffer.
+
+        Has to return a triple of (MESSAGE, specifier, data) or None, in case
+        there are no further messages in the receive queue.
+
+        If there is an Error during decoding, this method has to raise a
+        DecodeError.
+        """
+        raise NotImplementedError
+
+    def receive(self):
+        """Receive data from the link.
+
+        Should return the received data or None if there was nothing new. Has
+        to raise a ConnectionClose on shutdown of the connection or on errors
+        that are not recoverable.
+        """
+        raise NotImplementedError
+
+    def send_reply(self, data):
+        """send reply
+
+        stops recv loop on error
+        """
+        raise NotImplementedError
+
+    def format(self):
+        """
+        Format available connection data into something recognizable for
+        logging.
+
+        For example, the remote IP address or a connection identifier.
+        """
+        raise NotImplementedError
+
+# TODO: server baseclass?

frappy/protocol/interface/tcp.py

@@ -18,122 +18,77 @@
 #   Markus Zolliker <markus.zolliker@psi.ch>
 #
 # *****************************************************************************
-"""provides tcp interface to the SECoP Server"""
+"""TCP interface to the SECoP Server"""
 
 import errno
 import os
 import socket
 import socketserver
-import sys
-import threading
 import time
 
 from frappy.datatypes import BoolType, StringType
-from frappy.errors import SECoPError
-from frappy.lib import formatException, formatExtendedStack, \
-    formatExtendedTraceback, SECoP_DEFAULT_PORT
+from frappy.lib import SECoP_DEFAULT_PORT
 from frappy.properties import Property
 from frappy.protocol.interface import decode_msg, encode_msg_frame, get_msg
-from frappy.protocol.messages import ERRORPREFIX, HELPREPLY, HELPREQUEST, \
-    HelpMessage
+from frappy.protocol.interface.handler import ConnectionClose, \
+    RequestHandler, DecodeError
+from frappy.protocol.messages import HELPREQUEST
+
 
 MESSAGE_READ_SIZE = 1024
-HELP = HELPREQUEST.encode()
 
 
-class TCPRequestHandler(socketserver.BaseRequestHandler):
+def format_address(addr):
+    if len(addr) == 2:
+        return '%s:%d' % addr
+    address, port = addr[0:2]
+    if address.startswith('::ffff'):
+        return '%s:%d' % (address[7:], port)
+    return '[%s]:%d' % (address, port)
 
+
+class TCPRequestHandler(RequestHandler):
     def setup(self):
-        self.log = self.server.log
-        self.running = True
-        self.send_lock = threading.Lock()
+        super().setup()
+        self.request.settimeout(1)
+        self.data = b''
 
-    def handle(self):
-        """handle a new tcp-connection"""
-        # copy state info
-        mysocket = self.request
-        clientaddr = self.client_address
-        serverobj = self.server
-
-        self.log.info("handling new connection from %s",  format_address(clientaddr))
-        data = b''
-
-        # notify dispatcher of us
-        serverobj.dispatcher.add_connection(self)
-
-        # copy relevant settings from Interface
-        detailed_errors = serverobj.detailed_errors
-
-        mysocket.settimeout(1)
-        # start serving
-        while self.running:
+    def finish(self):
+        """called when handle() terminates, i.e. the socket closed"""
+        super().finish()
+        # close socket
         try:
-                newdata = mysocket.recv(MESSAGE_READ_SIZE)
-                if not newdata:
-                    # no timeout error, but no new data -> connection closed
-                    return
-                data = data + newdata
+            self.request.shutdown(socket.SHUT_RDWR)
+        except Exception:
+            pass
+        finally:
+            self.request.close()
+
+    def ingest(self, newdata):
+        self.data += newdata
+
+    def next_message(self):
+        try:
+            message, self.data = get_msg(self.data)
+            if message is None:
+                return None
+            if message.strip() == b'':
+                return (HELPREQUEST, None, None)
+            return decode_msg(message)
+        except Exception as e:
+            raise DecodeError('exception in receive', raw_msg=message) from e
+
+    def receive(self):
+        try:
+            data = self.request.recv(MESSAGE_READ_SIZE)
+            if not data:
+                raise ConnectionClose('socket was closed')
+            return data
         except socket.timeout:
-                continue
+            return None
         except socket.error as e:
             self.log.exception(e)
-                return
-            if not data:
-                continue
-            # put data into (de-) framer,
-            # put frames into (de-) coder and if a message appear,
-            # call dispatcher.handle_request(self, message)
-            # dispatcher will queue the reply before returning
-            while self.running:
-                origin, data = get_msg(data)
-                if origin is None:
-                    break  # no more messages to process
-                origin = origin.strip()
-                if origin in (HELP, b''):  # empty string -> send help message
-                    for idx, line in enumerate(HelpMessage.splitlines()):
-                        # not sending HELPREPLY here, as there should be only one reply for every request
-                        self.send_reply(('_', f'{idx + 1}', line))
-                    # ident matches request
-                    self.send_reply((HELPREPLY, None, None))
-                    continue
-                try:
-                    msg = decode_msg(origin)
-                except Exception as err:
-                    # we have to decode 'origin' here
-                    # use latin-1, as utf-8 or ascii may lead to encoding errors
-                    msg = origin.decode('latin-1').split(' ', 3) + [None]  # make sure len(msg) > 1
-                    result = (ERRORPREFIX + msg[0], msg[1], ['InternalError', str(err),
-                                                             {'exception': formatException(),
-                                                              'traceback': formatExtendedStack()}])
-                    print('--------------------')
-                    print(formatException())
-                    print('--------------------')
-                    print(formatExtendedTraceback(sys.exc_info()))
-                    print('====================')
-                else:
-                    try:
-                        result = serverobj.dispatcher.handle_request(self, msg)
-                    except SECoPError as err:
-                        result = (ERRORPREFIX + msg[0], msg[1], [err.name, str(err),
-                                                                 {'exception': formatException(),
-                                                                  'traceback': formatExtendedStack()}])
-                    except Exception as err:
-                        # create Error Obj instead
-                        result = (ERRORPREFIX + msg[0], msg[1], ['InternalError', repr(err),
-                                                                 {'exception': formatException(),
-                                                                  'traceback': formatExtendedStack()}])
-                        print('--------------------')
-                        print(formatException())
-                        print('--------------------')
-                        print(formatExtendedTraceback(sys.exc_info()))
-                        print('====================')
-
-                if not result:
-                    self.log.error('empty result upon msg %s', repr(msg))
-                if result[0].startswith(ERRORPREFIX) and not detailed_errors:
-                    # strip extra information
-                    result[2][2].clear()
-                self.send_reply(result)
+            raise ConnectionClose() from e
 
     def send_reply(self, data):
         """send reply
@@ -156,18 +111,9 @@ class TCPRequestHandler(socketserver.BaseRequestHandler):
                     self.log.error('ERROR in send_reply %r', e)
                     self.running = False
 
-    def finish(self):
-        """called when handle() terminates, i.e. the socket closed"""
-        self.log.info('closing connection from %s', format_address(self.client_address))
-        # notify dispatcher
-        self.server.dispatcher.remove_connection(self)
-        # close socket
-        try:
-            self.request.shutdown(socket.SHUT_RDWR)
-        except Exception:
-            pass
-        finally:
-            self.request.close()
+    def format(self):
+        return f'from {format_address(self.client_address)}'
+
 
 class DualStackTCPServer(socketserver.ThreadingTCPServer):
     """Subclassed to provide IPv6 capabilities as socketserver only uses IPv4"""
@@ -230,12 +176,3 @@ class TCPServer(DualStackTCPServer):
         if ntry:
             self.log.warning('tried again %d times after "Address already in use"', ntry)
         self.log.info("TCPServer initiated")
-
-
-def format_address(addr):
-    if len(addr) == 2:
-        return '%s:%d' % addr
-    address, port = addr[0:2]
-    if address.startswith('::ffff'):
-        return '%s:%d' % (address[7:], port)
-    return '[%s]:%d' % (address, port)

frappy/protocol/interface/ws.py

@@ -0,0 +1,160 @@
+# *****************************************************************************
+# This program is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 2 of the License, or (at your option) any later
+# version.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#
+# Module authors:
+#   Alexander Zaft <a.zaft@fz-juelich.de>
+#
+# *****************************************************************************
+
+import json
+from functools import partial
+
+from websockets.exceptions import ConnectionClosedOK, ConnectionClosedError
+from websockets.sync.server import CloseCode, serve
+
+from frappy.protocol.interface.handler import ConnectionClose, \
+    RequestHandler, DecodeError
+from frappy.protocol.messages import HELPREQUEST
+
+
+def encode_msg_frame_str(action, specifier=None, data=None):
+    """ encode a msg_triple into an msg_frame, ready to be sent
+
+    action (and optional specifier) are str strings,
+    data may be an json-yfied python object"""
+    msg = (action, specifier or '', '' if data is None else json.dumps(data))
+    return ' '.join(msg).strip()
+
+
+class WSRequestHandler(RequestHandler):
+    """Handles a Websocket connection."""
+
+    def __init__(self, conn, server):
+        self.conn = conn
+        client_address = conn.remote_address
+        request = conn.socket
+        super().__init__(request, client_address, server)
+
+    def setup(self):
+        super().setup()
+        self.server.connections.add(self)
+
+    def finish(self):
+        """called when handle() terminates, i.e. the socket closed"""
+        super().finish()
+        self.server.connections.discard(self)
+        # this will be called for a second time if the server is shutting down,
+        # but in that case it will be a no-op
+        self.conn.close()
+
+    def ingest(self, newdata):
+        # recv on the websocket connection returns one message, we don't save
+        # anything in data
+        self.data = newdata
+
+    def next_message(self):
+        """split the string into a message triple."""
+        if self.data is None:
+            return None
+        try:
+            message = self.data.strip()
+            if message == '':
+                return HELPREQUEST, None, None
+            res = message.split(' ', 2) + ['', '']
+            action, specifier, data = res[0:3]
+            self.data = None
+            return (
+                action,
+                specifier or None,
+                None if data == '' else json.loads(data)
+            )
+        except Exception as e:
+            raise DecodeError('exception when reading in message',
+                              raw_msg=bytes(message, 'utf-8')) from e
+
+    def receive(self):
+        """receives one message from the websocket."""
+        try:
+            return self.conn.recv()
+        except TimeoutError:
+            return None
+        except ConnectionClosedOK:
+            raise ConnectionClose from None
+        except ConnectionClosedError as e:
+            self.log.error('No close frame received from %s', self.format())
+            raise ConnectionClose from e
+        except OSError as e:
+            self.log.exception(e)
+            raise ConnectionClose from e
+
+    def send_reply(self, data):
+        """send reply
+
+        stops recv loop on error (including timeout when output buffer full for
+        more than 1 sec)
+        """
+        if not data:
+            self.log.error('should not reply empty data!')
+            return
+        outdata = encode_msg_frame_str(*data)
+        with self.send_lock:
+            if self.running:
+                try:
+                    self.conn.send(outdata)
+                except (BrokenPipeError, IOError) as e:
+                    self.log.debug('send_reply got an %r, connection closed?',
+                                   e)
+                    self.running = False
+                except Exception as e:
+                    self.log.error('ERROR in send_reply %r', e)
+                    self.running = False
+
+    def format(self):
+        return f'{self.conn.id} from {self.client_address}'
+
+class WSServer:
+    """Server for providing a websocket interface.
+
+    Implementation note:
+    The websockets library doesn't provide an option to subclass its server, so
+    we take the returned value as an attribute and provide the neccessary
+    function calls.
+    """
+    def __init__(self, name, logger, options, srv):
+        self.connections = set()  # keep track for shutting down
+        self.dispatcher = srv.dispatcher
+        self.name = name
+        self.log = logger
+        self.port = int(options.pop('uri').split('://', 1)[-1])
+        self.detailed_errors = options.pop('detailed_errors', False)
+
+        handle = partial(WSRequestHandler, server=self)
+        # websockets only gives the serve method without an option to subclass
+        self.ws_server = serve(handle, '', self.port, logger=logger)
+        self.log.info("Websocket server %s binding to port %d", name, self.port)
+
+    def serve_forever(self):
+        self.ws_server.serve_forever()
+
+    def shutdown(self):
+        for c in list(self.connections):
+            c.conn.close(code=CloseCode.GOING_AWAY, reason='shutting down')
+        self.ws_server.shutdown()
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, *args):
+        return self.shutdown()

frappy/server.py

@@ -53,6 +53,7 @@ except ImportError:
 class Server:
     INTERFACES = {
         'tcp': 'protocol.interface.tcp.TCPServer',
+        'ws': 'protocol.interface.ws.WSServer',
     }
     _restart = True
 

frappy_psi/dilsc.py

@@ -1,3 +1,4 @@
+#  -*- coding: utf-8 -*-
 # *****************************************************************************
 # This program is free software; you can redistribute it and/or modify it under
 # the terms of the GNU General Public License as published by the Free Software
@@ -18,79 +19,78 @@
 # *****************************************************************************
 """vector field"""
 
-from frappy.core import Drivable, Done, BUSY, IDLE, WARN, ERROR
-from frappy.errors import BadValueError
+import math
+from frappy.core import Drivable, Done, BUSY, IDLE, ERROR, Parameter, TupleOf, ArrayOf, FloatRange
+from frappy.errors import RangeError
 from frappy_psi.vector import Vector
+from frappy.states import HasStates, Retry, status_code
 
 
 DECREASE = 1
 INCREASE = 2
 
 
-class VectorField(Vector, Drivable):
-    _state = None
+class VectorField(HasStates, Vector, Drivable):
+    sphere_radius = Parameter('max. sphere', datatype=FloatRange(0, 0.7, unit='T'), readonly=True, default=0.6)
+    cylinders = Parameter('allowed cylinders (list of radius and height)',
+                          datatype=ArrayOf(TupleOf(FloatRange(0, 0.6, unit='T'), FloatRange(0, 5.2, unit='T')), 1, 9),
+                          readonly=True, default=((0.23, 5.2), (0.45, 0.8)))
 
-    def doPoll(self):
-        """periodically called method"""
-        try:
-            if self._starting:
-                # first decrease components
-                driving = False
-                for target, component in zip(self.target, self.components):
-                    if target * component.value < 0:
-                        # change sign: drive to zero first
-                        target = 0
-                    if abs(target) < abs(component.target):
-                        if target != component.target:
-                            component.write_target(target)
-                        if component.isDriving():
-                            driving = True
-                if driving:
-                    return
-                # now we can go to the final targets
-                for target, component in zip(self.target, self.components):
-                     component.write_target(target)
-                self._starting = False
-            else:
-                for component in self.components:
-                    if component.isDriving():
-                        return
-                self.setFastPoll(False)
-        finally:
-            super().doPoll()
+    def initModule(self):
+        super().initModule()
+        # override check_limits of the components with a check for restrictions on the vector
+        for idx, component in enumerate(self.components):
+
+            def outer_check(target, vector=self, i=idx, inner_check=component.check_target):
+                inner_check(target)
+                value = [c.value - math.copysign(c.tolerance, c.value)
+                         for c in vector.components]
+                value[i] = target
+                vector._check_limits(value)
+
+            component.check_target = outer_check
 
     def merge_status(self):
-        names = [c.name for c in self.components if c.status[0] >= ERROR]
-        if names:
-            return ERROR, 'error in %s' % ', '.join(names)
-        names = [c.name for c in self.components if c.isDriving()]
-        if self._state:
-            # self.log.info('merge %r', [c.status for c in self.components])
-            if names:
-                direction = 'down ' if self._state == DECREASE else ''
-                return BUSY, 'ramping %s%s' % (direction, ', '.join(names))
-            if self.status[0] == BUSY:
         return self.status
-            return BUSY, 'driving'
-        if names:
-            return WARN, 'moving %s directly' % ', '.join(names)
-        names = [c.name for c in self.components if c.status[0] >= WARN]
-        if names:
-            return WARN, 'warnings in %s' % ', '.join(names)
-        return IDLE, ''
 
-    def write_target(self, value):
+    def _check_limits(self, value):
+        """check if value is within one of the safe shapes"""
+        if sum((v ** 2 for v in value)) <= self.sphere_radius ** 2:
+            return
+        for r, h in self.cylinders:
+            if sum(v ** 2 for v in value[0:2]) <= r ** 2 and abs(value[2]) <= h:
+                return
+        raise RangeError('vector %s does not fit in any limiting shape' % repr(value))
+
+    def write_target(self, target):
         """initiate target change"""
-        # first make sure target is valid
-        for target, component in zip(self.target, self.components):
-            # check against limits if individual components
-            component.check_limits(target)
-        if sum(v * v for v in value) > 1:
-            raise BadValueError('norm of vector too high')
-        self.log.info('decrease')
-        self.setFastPoll(True)
-        self.target = value
-        self._state = DECREASE
-        self.doPoll()
-        self.log.info('done write_target %r', value)
-        return Done
+        # check limits  first
+        for component_target, component in zip(target, self.components):
+            # check against limits of individual components
+            component.check_target(component_target, vector=None)  # no outer check here!
+        self._check_limits(target)
+        for component_target, component in zip(target, self.components):
+            if component_target * component.value < 0:
+                # change sign: drive to zero first
+                component_target = 0
+            if abs(component_target) > abs(component.value):
+                continue  # do not drive yet
+            component.write_target(component_target)
+        self.start_machine(self.ramp_down, target=target)
+        return target
+
+    @status_code(BUSY)
+    def ramp_down(self, state):
+        for target, component in zip(state.target, self.components):
+            if component.isDriving():
+                return Retry()
+        for target, component in zip(state.target, self.components):
+            component.write_target(target)
+        return self.final_ramp
+
+    @status_code(BUSY)
+    def final_ramp(self, state):
+        for component in self.components:
+            if component.isDriving():
+                return Retry()
+        return self.final_status()

requirements.txt

@@ -5,6 +5,8 @@ mlzlog >=0.2.0
 # daemonizing
 psutil
 python-daemon >=2.0
+# websocket interface:
+websockets>=11.0
 # for zmq interface
 #pyzmq>=13.1.0
 #for ppms on windows

test/test_attach.py

@@ -19,6 +19,7 @@
 #
 # *****************************************************************************
 
+from frappy.io import HasIO
 from frappy.modules import Module, Attached
 from frappy.protocol.dispatcher import Dispatcher
 
@@ -29,6 +30,9 @@ class LoggerStub:
     info = warning = exception = debug
     handlers = []
 
+    def getChild(self, name):
+        return self
+
 
 logger = LoggerStub()
 
@@ -51,6 +55,7 @@ class ServerStub:
     def __init__(self):
         self.secnode = SecNodeStub()
         self.dispatcher = Dispatcher('dispatcher', logger, {}, self)
+        self.log = logger
 
 
 def test_attach():
@@ -64,3 +69,22 @@ def test_attach():
     srv.secnode.add_module(a, 'a')
     srv.secnode.add_module(m, 'm')
     assert m.att == a
+
+
+def test_attach_hasio_uri():
+    class TestIO(Module):
+        def __init__(self, name, logger, cfgdict, srv):
+            self._uri = cfgdict.pop('uri')
+            super().__init__(name, logger, cfgdict, srv)
+
+    class HasIOTest(HasIO):
+        ioClass = TestIO
+
+    srv = ServerStub()
+    m = HasIOTest('m', logger, {'description': '', 'uri': 'abc'}, srv)
+    assert srv.secnode.modules['m_io']._uri == 'abc'
+    assert m.io == srv.secnode.modules['m_io']
+    # two modules with the same IO should use the same io module
+    m2 = HasIOTest('m', logger, {'description': '', 'uri': 'abc'}, srv)
+    assert m2.io == srv.secnode.modules['m_io']
+