- temperature (incl. heater)
- pressure (incl. control via valve motor)
- LHe and LN2 levels
not yet included: magnet power supply
Change-Id: Id4ee8f9b7ebfa6284e519ba485217f9a19d70d59
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/28028
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
in secop.proxy the callers modules method announceUpdate is
called from an other thread while the accessLock is locked,
creating a deadlock. solve this by creating an other lock
'updateLock' for the update.
+ add status parameter even to non-Readable proxy modules,
in order to indicate a failed connection
+ fix an error in secop_psi/softcal.py
Change-Id: Iae7c6d5a74001150a47aa9dc99209c15d972cd5e
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/28130
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- safe_current: current limit for unlimited move
- move_limit: max. angle to move with high current > safe_current
- direct axis parameter access is not exported by default
- support for home switch
- allow use without encoder
- automatic reset for motors in a configuration, where the motor
current is deliberatly low for a limited torque
- improved error message on driving failures
Change-Id: I25f8516905a2c4c3cda09d091d5a43004ec6dc6f
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/28029
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
This valve needs 8 turns to open. As the encoder forgets
the number if turns on power cycle, a home switch is
mounte, which engages during the last turn when closing.
The final close position is determined by closing the valve
with a defined motor current/torque.
+ fix an issue in StateMachine.start: the first cycle
must be called after the new state is assigned
Change-Id: I34cd05d10d97b043f9e3126310943b74ee727382
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/28030
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- fix: calling state.start(<new state>) on restart must ensure
that the function <new state> is called before state.start()
returns.
- modify slighly behaviour of cleanup function
Change-Id: I483a3aefa6af4712b3cf13f62c86d4c06edd1d8d
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/28020
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Enrico Faulhaber <enrico.faulhaber@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
the HasConvergence mixin runs a state machine to determine
when the value has reached target from parameters 'tolerance',
'settling_time' or detects convergence failure depending on
the parameter 'timeout'.
Change-Id: Iccc3d43bcf5ab54ae02ce3a81423c2decc1b392d
Reviewed-on: https://forge.frm2.tum.de/review/c/sine2020/secop/playground/+/27967
Tested-by: Jenkins Automated Tests <pedersen+jenkins@frm2.tum.de>
Reviewed-by: Markus Zolliker <markus.zolliker@psi.ch>
- driving with a generator
- 3 phases
1) find active range (low current, far movement until force over hysteresis)
2) release force until well below target
3) adjusting using pid_p. (this is in fact an integral factor)
