Added carriage return at end of print command in pmacReadReady.

Makefile

@@ -14,7 +14,7 @@ REQUIRED+=sinqMotor
 motorBase_VERSION=7.2.2
 
 # Specify the version of sinqMotor we want to build against
-sinqMotor_VERSION=0.13.0
+sinqMotor_VERSION=0.14
 
 # These headers allow to depend on this library for derived drivers.
 HEADERS += src/pmacAsynIPPort.h

README.md

@@ -26,13 +26,13 @@ The full turboPmacX.cmd file looks like this:
 
 ```
 # Define the name of the controller and the corresponding port
-epicsEnvSet("NAME","turboPmacX")
+epicsEnvSet("DRIVER_PORT","turboPmacX")
-epicsEnvSet("ASYN_PORT","p$(NAME)")
+epicsEnvSet("IP_PORT","p$(DRIVER_PORT)")
 
 # Create the TCP/IP socket used to talk with the controller. The socket can be adressed from within the IOC shell via the port name.
 # We do not use the standard asyn port driver here, but a PMAC-specific one which enables the usage of StreamDevices for
 # communicating with the controller directly.
-pmacAsynIPPortConfigure("$(ASYN_PORT)","172.28.101.24:1025")
+pmacAsynIPPortConfigure("$(IP_PORT)","172.28.101.24:1025")
 
 # Create the controller object with the defined name and connect it to the socket via the port name.
 # The other parameters are as follows:
@@ -40,25 +40,25 @@ pmacAsynIPPortConfigure("$(ASYN_PORT)","172.28.101.24:1025")
 # 0.05: Busy poll period in seconds
 # 1: Idle poll period in seconds
 # 1: Socket communication timeout in seconds
-turboPmacController("$(NAME)", "$(ASYN_PORT)", 8, 0.05, 1, 1);
+turboPmacController("$(DRIVER_PORT)", "$(IP_PORT)", 8, 0.05, 1, 1);
 
 # Define some axes for the specified MCU at the given slot (1, 2 and 5). No slot may be used twice!
-turboPmacAxis("$(NAME)",1);
+turboPmacAxis("$(DRIVER_PORT)",1);
-turboPmacAxis("$(NAME)",2);
+turboPmacAxis("$(DRIVER_PORT)",2);
-turboPmacAxis("$(NAME)",5);
+turboPmacAxis("$(DRIVER_PORT)",5);
 
 # Set the number of subsequent timeouts 
-setMaxSubsequentTimeouts("$(NAME)", 20);
+setMaxSubsequentTimeouts("$(DRIVER_PORT)", 20);
 
 # Configure the timeout frequency watchdog: A maximum of 10 timeouts are allowed in 300 seconds before an alarm message is sent.
-setThresholdComTimeout("$(NAME)", 300, 10);
+setThresholdComTimeout("$(DRIVER_PORT)", 300, 10);
 
 # Parametrize the EPICS record database with the substitution file named after the MCU.
 epicsEnvSet("SINQDBPATH","$(sinqMotor_DB)/sinqMotor.db")
-dbLoadTemplate("$(TOP)/$(NAME).substitutions", "INSTR=$(INSTR)$(NAME):,CONTROLLER=$(NAME)")
+dbLoadTemplate("$(TOP)/$(DRIVER_PORT).substitutions", "INSTR=$(INSTR)$(DRIVER_PORT):,CONTROLLER=$(DRIVER_PORT)")
 epicsEnvSet("SINQDBPATH","$(turboPmac_DB)/turboPmac.db")
-dbLoadTemplate("$(TOP)/$(NAME).substitutions", "INSTR=$(INSTR)$(NAME):,CONTROLLER=$(NAME)")
+dbLoadTemplate("$(TOP)/$(DRIVER_PORT).substitutions", "INSTR=$(INSTR)$(DRIVER_PORT):,CONTROLLER=$(DRIVER_PORT)")
-dbLoadRecords("$(sinqMotor_DB)/asynRecord.db","P=$(INSTR)$(NAME),PORT=$(ASYN_PORT)")
+dbLoadRecords("$(sinqMotor_DB)/asynRecord.db","P=$(INSTR)$(DRIVER_PORT),PORT=$(IP_PORT)")
 ```
 
 ### Additional records

src/pmacAsynIPPort.c

@@ -496,7 +496,7 @@ static int pmacReadReady(pmacPvt *pPmacPvt, asynUser *pasynUser) {
                     pPmacPvt->portName, thisRead);
     } else {
         asynPrint(pasynUser, ASYN_TRACE_ERROR,
-                  "%s read pmacReadReady failed status=%d,retval=%d",
+                  "%s read pmacReadReady failed status=%d,retval=%d\n",
                   pPmacPvt->portName, status, retval);
     }
     return retval;