3c9932dc18
- Reduced poll rate of EL737
...
- Removed unneeded hardware limit reading code from EL734
2023-02-16 14:29:05 +01:00
9b9072b83b
Improved error handling in the EL737 scalerRecord driver
2023-01-31 11:42:04 +01:00
3b2a21094c
Fixed pmacV3 axis codes
2023-01-12 15:16:49 +01:00
a899a28182
sMore debugging output in devScalerEL737
2023-01-11 15:09:43 +01:00
0cbfe45893
Fixed ErormoveDriver to stop only on end switches when the target
...
exceeds the limits. Otherwise motors would get stuck on the switches
when trying to move off them.
2022-08-16 10:54:10 +02:00
bb1c10c7cd
EL737 Increase timeout
...
The EL737 module micht give rise to a failure if the counterbox
does not reply withing 1s. This is the case at FOCUS.
With this commit the timeout is increased to 2s.
2022-07-21 13:42:31 +02:00
339da2e9ff
PMAC V3: axis status 5,6 not a failure
...
The old implementation assumes that the axis staying in state 5,6
for too much time a implies a failure. This is no longer the case.
2022-07-21 13:37:32 +02:00
80877aa6ab
pmacV3 read speed and evaluate ETA
2022-05-27 15:21:46 +02:00
afc92bde3f
Improved status reporting
2022-05-20 10:38:32 +02:00
8e2c1af10e
Some cleanup, force reload encoder before enable
2022-05-20 08:35:42 +00:00
f5da0d54bd
Reduce polling, se MsgTxt if move when disabled
2022-05-20 08:35:42 +00:00
ad05433602
Bugfix + cleanup
2022-05-20 08:35:42 +00:00
92364a1de8
Can set and read enable, something broken with movements and status
2022-05-20 08:35:42 +00:00
403eecafae
pmac Enable PV successfully tested
2022-05-20 08:35:42 +00:00
fbf2331a05
pmacV3 read axis state
2022-05-20 08:35:42 +00:00
14bbda3364
Add pmacV3 poll
2022-05-20 08:35:42 +00:00
c7fea08718
pmacV3 enable/disable axis
...
The default behaviour of the pmac controller is to enable the motor at startup. With the controller V3 we want that at IOC startup the axis to be off.
A database entry like
record(longout, "$(P)$(M):Enable") {
field(DTYP, "asynInt32")
field(OUT, "@asyn($(PORT),$(N),1) ENABLE_AXIS")
field(PINI, "YES")
}
can be used to give access to enable/disable the axis.
2022-05-20 08:35:42 +00:00
edc71af235
Bugfix pmacV3
2022-05-20 08:35:42 +00:00
c805385ad1
Allow enable/disable (tentative)
2022-05-20 08:35:42 +00:00
929f9f600d
Add PMAC V3
...
- limit switches: use PXX37, PXX38 insteam of MXX21, MXX22
- if the motor is running query for axis position (QXX10) and status (PXX00)
- else query also error status (PXX01) and limit switches (PXX37-8)
- make the requests in 1+1 transactions
2022-05-20 08:35:42 +00:00
8c3e68394f
Changes to Scaler, add build for version 7 in Makefile
2022-05-20 10:25:41 +02:00
646607e476
EuroMove fix "addrCommand" bug in controller
2022-03-02 06:41:39 +01:00
68a265b199
EL734 positioning failure + improve logging
2022-03-02 06:39:18 +01:00
542abcbaad
pmac improve handling of the error message
2022-03-02 06:37:33 +01:00
efbd0e19cf
Updated EuromoveDriver to work with Prologix GPIB-Ethernet
...
Improved threshold handling on EL737
Minor changes
2021-06-17 09:30:28 +02:00
6de4a878ef
Merge branch 'amor-selene'
...
Conflicts:
.gitignore
sinqEPICSApp/src/pmacAxis.cpp
sinqEPICSApp/src/pmacAxis.h
sinqEPICSApp/src/pmacController.cpp
sinqEPICSApp/src/pmacController.h
2020-10-01 09:31:23 +02:00
d86da602d2
Added .gitignore
2020-07-09 14:19:13 +02:00
c9e7830274
- Fixed reference run for Phytron
...
- Added brake handling to phytron
- Added code to set speed for phytron
- Removed scaling on Selene pmac limits
- Removed enabling on Selene pmac axis
2020-07-09 14:15:26 +02:00
d1d74f4db3
Merge branch 'master' of ssh://git.psi.ch/sinqdev/sinqepicsapp
2020-06-23 09:20:17 +02:00
d1beb9b0d8
Merge branch 'master' of ssh://git.psi.ch/sinqdev/sinqepicsapp into amor-selene
2020-06-23 09:19:25 +02:00
3ae13875cf
Added fucking brake support to Phytron
2020-06-23 09:18:12 +02:00
f56ef2c74c
Committing the last status of selene work in the corona lockdown.
...
The problem is in the MCU, probably
2020-03-18 15:53:44 +01:00
a25f8cabb9
Selene positions do not need factor *1000
2020-02-19 15:39:23 +01:00
c4fe45c0cb
Add a set PV for the SeleneMotor
...
- make the number of extra parameters in SINQController configurable
- add database entry for the motor set field
- add the new function "setMotorPosition_" to the Selene controller
- execute Qx59=<pos> to set the new position
2020-02-18 12:32:24 +01:00
3b7133ecfe
Make sure that the SINQ library version stays the same
2020-02-18 12:31:25 +01:00
e9a615d0fa
Changes in pmac controller
2020-02-17 11:10:02 +01:00
12249d5471
Implemented Homing on the EuroMove driver
2020-02-10 10:00:56 +01:00
6d823e2265
Removed a debug statement from EuroMoveDriver.cpp
2020-01-24 13:04:40 +01:00
75de7a3a4c
First version of a driver for the LLB EuroMove controller. USB feature still missing.
2020-01-21 14:17:17 +01:00
5aefbd4684
Fixed a bug in the pmac driver which caused wrong state 5/6 errors to be
...
found on a slow motor.
2019-10-30 11:32:33 +01:00
3133d933fa
Minor fixes to the PhytronDriver
...
Removed some annoying messages grom Nanotec Driver
2019-10-10 11:35:25 +02:00
bf2ff63a4b
Fixed bugs in EL734
...
Phytron motor driver is now working
May be fixed inverted limits on pmac
2019-05-23 16:50:10 +02:00
b4b093efdf
Some cleanup in EL734Driver.cpp
2019-05-20 09:17:33 +02:00
f424477a6a
Fixed a bug with inproperly cleared MsgTxt in SINQAxis
...
Extended pmacAxis to properly deal with HRPT pmac motors which have an extra error condition
2019-05-13 12:03:24 +02:00
3bea34700e
Added MsgTxt support to Nanotec motor driver
2019-01-08 11:55:50 +01:00
02ab5ff9b8
Added MsgTxt support to pmac controller driver
2019-01-08 11:47:02 +01:00
972131d86a
Added new system disconnect reporting to the phytron driver
2019-01-08 11:35:09 +01:00
f909c41a2b
Updated the Phytron driver to use MsgTxt
...
Updated the Phytron driver to use a selector in order to support the use case of multiple phytrons on one channel
The chnages still need to be tested
2019-01-08 09:41:34 +01:00
460030e410
Made EL737 send an empty string in MsgTxt on success
...
Fixed a type in an error message
2018-11-07 16:26:58 +01:00
2a964503a4
Added a number of auxiliary Makefiles
...
- MakeScaler.RHEL7 to build the EPICS scaler module from source. We use a better one then the standard one.
- MakeAutoSave.RHEL7 to build autosave from the PSI module system
- Modified the EL734Driver to set the MsgTxt to NULL when everything is happy
2018-11-07 16:18:16 +01:00
