adds PV to find out number of supported channels

Makefile

@@ -7,17 +7,16 @@ EPICS_VERSIONS=7.0.7
 ARCH_FILTER=RHEL%
 
 # additional module dependencies
-REQUIRED+=stream
+REQUIRED+=asyn
 REQUIRED+=calc
-
-# Release version
-LIBVERSION=ed-dev
+REQUIRED+=stream
 
 # DB files to include in the release
-TEMPLATES += db/counterbox.db
-TEMPLATES += db/counterbox.proto
-TEMPLATES += db/counterbox_common.db
+TEMPLATES += db/counterbox_4ch.db
+TEMPLATES += db/counterbox_8ch.db
 TEMPLATES += db/counterbox_v2.db
+TEMPLATES += db/counterbox_common.db
+TEMPLATES += db/counterbox.proto
 
 # DBD files to include in the release
 DBDS += src/counterbox.dbd
@@ -25,7 +24,8 @@ DBDS += src/counterbox.dbd
 # Source files to build
 SOURCES += src/counterbox.cpp
 
-SCRIPTS += scripts/counterbox.cmd
+SCRIPTS += scripts/counterbox_4ch.cmd
+SCRIPTS += scripts/counterbox_8ch.cmd
 SCRIPTS += scripts/counterbox_v2.cmd
 
 CXXFLAGS += -std=c++17

README.md

@@ -0,0 +1,56 @@
+Counterbox Epics Module
+-----------------------
+
+A Stream and Asyn based driver for Counterboxes as SINQ.
+
+This supports the older 4 and 8 channel EL737 models and the new 10CH 2nd
+generation systems.
+
+## How to Use
+
+Unless a custom database is needed, a device can be configure simply by setting
+the required environment variables when calling the correct counterbox script.
+
+Required Variables
+
+| Environment Variable | Purpose                                 |
+|----------------------|-----------------------------------------|
+| PREFIX               | Prefix of all device specific PVs       |
+| NAME                 | First field in all PVs after Prefix     |
+| ASYN_PORT            | Unique name for referencing Asyn device |
+| CNTBOX_HOST          | Network IP and Port of device           |
+
+All PVs take the form
+
+```
+$(PREFIX):$(NAME):*
+```
+
+Available device startup scripts
+
+* scripts/counterbox_4ch.cmd
+* scripts/counterbox_8ch.cmd
+* scripts/counterbox_v2.cmd
+
+A device can be configured using one of the startup scripts as follows
+
+```
+epicsEnvSet("PREFIX", "SQ:INSTRUMENT") # can also be set in runScript call
+
+runScript "$(sinq_DIR)counterbox_v2.cmd" "NAME=COUNTERBOX, ASYN_PORT=CBOXV2, CNTBOX_HOST=TestInst-DAQ1:2000"
+```
+
+## PVs of Interest
+
+| PV                                    | Description                                                          |
+|---------------------------------------|----------------------------------------------------------------------|
+| \$(PREFIX):\$(NAME):MsgTxt            | Contains unexpected response to executed command                     |
+| \$(PREFIX):\$(NAME):STATUS            | 0: Idle, 1: Counting, 2: Low rate, 3: Paused, 4: Error               |
+| \$(PREFIX):\$(NAME):MONITOR-CHANNEL   | Channel that PRESET-COUNT monitors (has RBV, only v2 can be changed) |
+| \$(PREFIX):\$(NAME):PRESET-COUNT      | Run count until specified pv value reached                           |
+| \$(PREFIX):\$(NAME):PRESET-TIME       | Run count until specified pv value in seconds reached                |
+| \$(PREFIX):\$(NAME):THRESHOLD         | Minimum rate for counting to preceed. (has RBV)                      |
+| \$(PREFIX):\$(NAME):THRESHOLD-MONITOR | Channel monitored for minimum rate (has RBV)                         |
+| \$(PREFIX):\$(NAME):ELAPSED-TIME      | Time Counterbox has been measuring for                               |
+| \$(PREFIX):\$(NAME):M_                | Current count on channel. (1-10 depending on box)                    |
+| \$(PREFIX):\$(NAME):CHANNELS          | Number of available channels (4, 8 or 10)                            |

db/counterbox.proto

@@ -95,6 +95,12 @@ readMinRate{
 ################################################################################
 # Read Values From Monitors
 
+readAll4 {
+ out "RA";
+ in "%(\$1ELAPSED-TIME)f %(\$1M1)d %(\$1M2)d %(\$1M3)d %(\$1M4)d";
+ @mismatch{in "%(\$1MsgTxt)s";}
+}
+
 readAll8 {
  out "RA";
  in "%(\$1ELAPSED-TIME)f %(\$1M1)d %(\$1M2)d %(\$1M3)d %(\$1M4)d %(\$1M5)d %(\$1M6)d %(\$1M7)d %(\$1M8)d";

db/counterbox_4ch.db

@@ -1,4 +1,4 @@
-# EL737 EPICS Database for streamdevice support
+# Counterbox EPICS Database
 # Macros
 # P - Prefix
 # NAME - just a name, e.g. EL737
@@ -22,6 +22,13 @@ record(longin, "$(P):$(NAME):MONITOR-CHANNEL_RBV")
  field(DISP, 1)
 }
 
+record(longin, "$(P):$(NAME):CHANNELS")
+{
+ field(DESC, "Total Supported Channels")
+ field(VAL, 4)
+ field(DISP, 1)
+}
+
 ################################################################################
 # Count Commands
 
@@ -30,7 +37,7 @@ record(longout,"$(P):$(NAME):THRESHOLD-MONITOR")
  field(DESC, "Channel monitored for minimum rate")
  field(VAL, "1") # Monitor
  field(DRVL, "1") # Smallest Threshold Channel
- field(DRVL, "8") # Largest Threshold Channel
+ field(DRVL, "4") # Largest Threshold Channel
 }
 
 ################################################################################
@@ -39,7 +46,7 @@ record(longout,"$(P):$(NAME):THRESHOLD-MONITOR")
 record(ai, "$(P):$(NAME):READALL")
 {
  field(DESC, "Reads monitors and elapsed time")
- field(INP, "@$(PROTO) readAll8($(P):$(NAME):) $(ASYN_PORT)")
+ field(INP, "@$(PROTO) readAll4($(P):$(NAME):) $(ASYN_PORT)")
  field(SCAN, ".2 second")
  field(DTYP, "stream")
  field(FLNK, "$(P):$(NAME):UNSET-COUNTING")

db/counterbox_8ch.db

@@ -0,0 +1,73 @@
+# EL737 EPICS Database for streamdevice support
+# Macros
+# P - Prefix
+# NAME - just a name, e.g. EL737
+# PROTO - Stream device protocol file
+# ASYN_PORT - Low level Asyn IP Port to EL737
+
+################################################################################
+# Status Variables
+
+record(longin, "$(P):$(NAME):MONITOR-CHANNEL")
+{
+ field(DESC, "PRESET-COUNT Monitors this channel")
+ field(VAL, 1)
+ field(DISP, 1)
+}
+
+record(longin, "$(P):$(NAME):MONITOR-CHANNEL_RBV")
+{
+ field(DESC, "PRESET-COUNT Monitors this channel")
+ field(VAL, 1)
+ field(DISP, 1)
+}
+
+record(longin, "$(P):$(NAME):CHANNELS")
+{
+ field(DESC, "Total Supported Channels")
+ field(VAL, 8)
+ field(DISP, 1)
+}
+
+################################################################################
+# Count Commands
+
+record(longout,"$(P):$(NAME):THRESHOLD-MONITOR")
+{
+ field(DESC, "Channel monitored for minimum rate")
+ field(VAL, "1") # Monitor
+ field(DRVL, "1") # Smallest Threshold Channel
+ field(DRVL, "8") # Largest Threshold Channel
+}
+
+################################################################################
+# Read all monitors values
+
+record(ai, "$(P):$(NAME):READALL")
+{
+ field(DESC, "Reads monitors and elapsed time")
+ field(INP, "@$(PROTO) readAll8($(P):$(NAME):) $(ASYN_PORT)")
+ field(SCAN, ".2 second")
+ field(DTYP, "stream")
+ field(FLNK, "$(P):$(NAME):UNSET-COUNTING")
+}
+
+record(longin, "$(P):$(NAME):M5")
+{
+ field(DESC, "Counterbox CH5")
+}
+
+record(longin, "$(P):$(NAME):M6")
+{
+ field(DESC, "Counterbox CH6")
+}
+
+record(longin, "$(P):$(NAME):M7")
+{
+ field(DESC, "Counterbox CH7")
+}
+
+record(longin, "$(P):$(NAME):M8")
+{
+ field(DESC, "Counterbox CH8")
+}

db/counterbox_common.db

@@ -229,26 +229,6 @@ record(longin, "$(P):$(NAME):M4")
  field(DESC, "Counterbox CH4")
 }
 
-record(longin, "$(P):$(NAME):M5")
-{
- field(DESC, "Counterbox CH5")
-}
-
-record(longin, "$(P):$(NAME):M6")
-{
- field(DESC, "Counterbox CH6")
-}
-
-record(longin, "$(P):$(NAME):M7")
-{
- field(DESC, "Counterbox CH7")
-}
-
-record(longin, "$(P):$(NAME):M8")
-{
- field(DESC, "Counterbox CH8")
-}
-
 # Not yet sure whether we want to support this
 # record(longin, "$(P):$(NAME):R1")
 # {

db/counterbox_v2.db

@@ -24,6 +24,13 @@ record(longin, "$(P):$(NAME):MONITOR-CHANNEL_RBV")
  field(SCAN, "5 second")
 }
 
+record(longin, "$(P):$(NAME):CHANNELS")
+{
+ field(DESC, "Total Supported Channels")
+ field(VAL, 10)
+ field(DISP, 1)
+}
+
 ################################################################################
 # Count Commands
 
@@ -47,6 +54,26 @@ record(ai, "$(P):$(NAME):READALL")
  field(FLNK, "$(P):$(NAME):UNSET-COUNTING")
 }
 
+record(longin, "$(P):$(NAME):M5")
+{
+ field(DESC, "Counterbox CH5")
+}
+
+record(longin, "$(P):$(NAME):M6")
+{
+ field(DESC, "Counterbox CH6")
+}
+
+record(longin, "$(P):$(NAME):M7")
+{
+ field(DESC, "Counterbox CH7")
+}
+
+record(longin, "$(P):$(NAME):M8")
+{
+ field(DESC, "Counterbox CH8")
+}
+
 record(longin, "$(P):$(NAME):M9")
 {
  field(DESC, "Counterbox CH9")

scripts/counterbox.cmd

@@ -1,13 +0,0 @@
-require asyn
-
-# Need to be set by user
-# epicsEnvSet("CNTBOX_HOST", "testinst-daq1:2000")
-# epicsEnvSet("ASYN_PORT", "el737")
-# epicsEnvSet("PREFIX", "SQ:SINQTEST")
-# epicsEnvSet("NAME", "COUNTERBOX")
-
-epicsEnvSet("PROTO", "$(sinq_DB)counterbox.proto")
-
-drvAsynIPPortConfigure("$(ASYN_PORT)", "$(CNTBOX_HOST)", 0,   0,   0)
-dbLoadRecords("$(sinq_DB)counterbox_common.db", "P=$(PREFIX), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=$(ASYN_PORT)")
-dbLoadRecords("$(sinq_DB)counterbox.db", "P=$(PREFIX), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=$(ASYN_PORT)")

scripts/counterbox_4ch.cmd

@@ -0,0 +1,7 @@
+require asyn
+require stream
+
+epicsEnvSet("PROTO", "$(sinq_DB)counterbox.proto")
+drvAsynIPPortConfigure("$(ASYN_PORT)", "$(CNTBOX_HOST)", 0,   0,   0)
+dbLoadRecords("$(sinq_DB)counterbox_common.db", "P=$(PREFIX), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=$(ASYN_PORT)")
+dbLoadRecords("$(sinq_DB)counterbox_4ch.db", "P=$(PREFIX), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=$(ASYN_PORT)")

scripts/counterbox_8ch.cmd

@@ -0,0 +1,7 @@
+require asyn
+require stream
+
+epicsEnvSet("PROTO", "$(sinq_DB)counterbox.proto")
+drvAsynIPPortConfigure("$(ASYN_PORT)", "$(CNTBOX_HOST)", 0,   0,   0)
+dbLoadRecords("$(sinq_DB)counterbox_common.db", "P=$(PREFIX), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=$(ASYN_PORT)")
+dbLoadRecords("$(sinq_DB)counterbox_8ch.db", "P=$(PREFIX), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=$(ASYN_PORT)")

scripts/counterbox_v2.cmd

@@ -1,13 +1,7 @@
 require asyn
-
-# Need to be set by user
-# epicsEnvSet("CNTBOX_HOST", "testinst-daq1:2000")
-# epicsEnvSet("ASYN_PORT", "el737")
-# epicsEnvSet("PREFIX", "SQ:SINQTEST")
-# epicsEnvSet("NAME", "COUNTERBOX")
+require stream
 
 epicsEnvSet("PROTO", "$(sinq_DB)counterbox.proto")
-
 drvAsynIPPortConfigure("$(ASYN_PORT)", "$(CNTBOX_HOST)", 0,   0,   0)
 dbLoadRecords("$(sinq_DB)counterbox_common.db", "P=$(PREFIX), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=$(ASYN_PORT)")
 dbLoadRecords("$(sinq_DB)counterbox_v2.db", "P=$(PREFIX), NAME=$(NAME), PROTO=$(PROTO), ASYN_PORT=$(ASYN_PORT)")