forked from epics_driver_modules/motorBase
R3.14 changes.
This commit is contained in:
Ron Sluiter
@@ -1,12 +0,0 @@
|
||||
# Makefile.Host
|
||||
TOP = ../../..
|
||||
include $(TOP)/config/CONFIG_APP
|
||||
#----------------------------------------
|
||||
# ADD MACRO DEFINITIONS AFTER THIS LINE
|
||||
|
||||
DBDEXPAND = WithMPFInclude.dbd
|
||||
DBDNAME = WithMPFApp.dbd
|
||||
|
||||
include $(TOP)/config/RULES.Host
|
||||
#----------------------------------------
|
||||
# ADD RULES AFTER THIS LINE
|
||||
@@ -1,66 +0,0 @@
|
||||
# The WithMPF IOC can be configured either as a MPF client in a two CPU board
|
||||
# configuration, or as a single CPU board with both MPF client and server on
|
||||
# the same CPU board. Remove either the "# !MPF-1-CPU! #" or the
|
||||
# "# !MPF-2-CPU! #" comment to configure.
|
||||
|
||||
|
||||
# Makefile.Vx
|
||||
TOP = ../../..
|
||||
include $(TOP)/config/CONFIG_APP
|
||||
#----------------------------------------
|
||||
# ADD MACRO DEFINITIONS AFTER THIS LINE
|
||||
|
||||
# !!WARNING!! If you copy this file to your
|
||||
# <ioctop> application, the following line
|
||||
# MUST BE REMOVED and a MOTOR entry must be
|
||||
# in your <ioctop>/config/RELEASE file.
|
||||
MOTOR_BIN = $(TOP)/bin/$(T_A)
|
||||
|
||||
include $(TEMPLATE_TOP)/exampleApp/src/baseLIBOBJS
|
||||
|
||||
LIBOBJS += $(EPICS_BASE_BIN)/iocCore
|
||||
|
||||
LIBOBJS += $(MOTOR_BIN)/motorLib
|
||||
LIBOBJS += $(MOTOR_BIN)/motorCOM_mpf
|
||||
LIBOBJS += $(MOTOR_BIN)/ImsLib
|
||||
LIBOBJS += $(MOTOR_BIN)/newportLib
|
||||
|
||||
# Objects from "mpf"
|
||||
LIBOBJS += $(MPF_BIN)/mpfLib
|
||||
LIBOBJS += $(MPF_BIN)/ipLib
|
||||
LIBOBJS += $(MPF_BIN)/DevMpf.o
|
||||
|
||||
LIBOBJS += $(MPF_SERIAL_BIN)/OctalUART.o
|
||||
LIBOBJS += $(MPF_SERIAL_BIN)/SerialPort.o
|
||||
LIBOBJS += $(MPF_SERIAL_BIN)/serialServer.o
|
||||
|
||||
LIBOBJS += $(MPF_GPIB_BIN)/GpibGsTi9914.o
|
||||
LIBOBJS += $(MPF_GPIB_BIN)/Gpib.o
|
||||
LIBOBJS += $(MPF_GPIB_BIN)/gpibServer.o
|
||||
|
||||
# The motor communication library (i.e. motorCOM_mpf)
|
||||
# requires both serial and GPIB support. Some motion
|
||||
# controllers (e.g., Newport) can be configured from
|
||||
# the st.cmd file for either serial or GPIB
|
||||
# communication; hence, the reason for supporting both
|
||||
# at run time.
|
||||
|
||||
LIBOBJS += $(EPICS_BASE_BIN)/drvGpib.o
|
||||
# Up to and including EPICS base R3.13.3, drvGpib.o
|
||||
# requires drvBitBus.o below.
|
||||
LIBOBJS += $(EPICS_BASE_BIN)/drvBitBus.o
|
||||
|
||||
LIBNAME = WithMPFLib
|
||||
|
||||
# Both "Local" and "Remote" versions of GpibHideos are
|
||||
# copied to the bin directory. Which one is loaded is
|
||||
# specified in the st.cmd file.
|
||||
BIN_INSTALLS = $(MPF_GPIB_BIN)/GpibHideosLocal.o
|
||||
BIN_INSTALLS += $(MPF_GPIB_BIN)/GpibHideosRemote.o
|
||||
|
||||
#Note that the command line that builds the
|
||||
#library $(LIBNAME) may be HUGE (>3kB)
|
||||
#
|
||||
include $(TOP)/config/RULES.Vx
|
||||
#----------------------------------------
|
||||
# ADD RULES AFTER THIS LINE
|
||||
@@ -1,12 +0,0 @@
|
||||
# Makefile.Host
|
||||
TOP = ../../..
|
||||
include $(TOP)/config/CONFIG_APP
|
||||
#----------------------------------------
|
||||
# ADD MACRO DEFINITIONS AFTER THIS LINE
|
||||
|
||||
DBDEXPAND = WithMPFInclude.dbd
|
||||
DBDNAME = WithMPFApp.dbd
|
||||
|
||||
include $(TOP)/config/RULES.Host
|
||||
#----------------------------------------
|
||||
# ADD RULES AFTER THIS LINE
|
||||
@@ -1,66 +0,0 @@
|
||||
# The WithMPF IOC can be configured either as a MPF client in a two CPU board
|
||||
# configuration, or as a single CPU board with both MPF client and server on
|
||||
# the same CPU board. Remove either the "# !MPF-1-CPU! #" or the
|
||||
# "# !MPF-2-CPU! #" comment to configure.
|
||||
|
||||
|
||||
# Makefile.Vx
|
||||
TOP = ../../..
|
||||
include $(TOP)/config/CONFIG_APP
|
||||
#----------------------------------------
|
||||
# ADD MACRO DEFINITIONS AFTER THIS LINE
|
||||
|
||||
# !!WARNING!! If you copy this file to your
|
||||
# <ioctop> application, the following line
|
||||
# MUST BE REMOVED and a MOTOR entry must be
|
||||
# in your <ioctop>/config/RELEASE file.
|
||||
MOTOR_BIN = $(TOP)/bin/$(T_A)
|
||||
|
||||
include $(TEMPLATE_TOP)/exampleApp/src/baseLIBOBJS
|
||||
|
||||
LIBOBJS += $(EPICS_BASE_BIN)/iocCore
|
||||
|
||||
LIBOBJS += $(MOTOR_BIN)/motorLib
|
||||
LIBOBJS += $(MOTOR_BIN)/motorCOM_mpf
|
||||
LIBOBJS += $(MOTOR_BIN)/ImsLib
|
||||
LIBOBJS += $(MOTOR_BIN)/newportLib
|
||||
|
||||
# Objects from "mpf"
|
||||
LIBOBJS += $(MPF_BIN)/mpfLib
|
||||
LIBOBJS += $(MPF_BIN)/ipLib
|
||||
LIBOBJS += $(MPF_BIN)/DevMpf.o
|
||||
|
||||
LIBOBJS += $(MPF_SERIAL_BIN)/OctalUART.o
|
||||
LIBOBJS += $(MPF_SERIAL_BIN)/SerialPort.o
|
||||
LIBOBJS += $(MPF_SERIAL_BIN)/serialServer.o
|
||||
|
||||
LIBOBJS += $(MPF_GPIB_BIN)/GpibGsTi9914.o
|
||||
LIBOBJS += $(MPF_GPIB_BIN)/Gpib.o
|
||||
LIBOBJS += $(MPF_GPIB_BIN)/gpibServer.o
|
||||
|
||||
# The motor communication library (i.e. motorCOM_mpf)
|
||||
# requires both serial and GPIB support. Some motion
|
||||
# controllers (e.g., Newport) can be configured from
|
||||
# the st.cmd file for either serial or GPIB
|
||||
# communication; hence, the reason for supporting both
|
||||
# at run time.
|
||||
|
||||
LIBOBJS += $(EPICS_BASE_BIN)/drvGpib.o
|
||||
# Up to and including EPICS base R3.13.3, drvGpib.o
|
||||
# requires drvBitBus.o below.
|
||||
LIBOBJS += $(EPICS_BASE_BIN)/drvBitBus.o
|
||||
|
||||
LIBNAME = WithMPFLib
|
||||
|
||||
# Both "Local" and "Remote" versions of GpibHideos are
|
||||
# copied to the bin directory. Which one is loaded is
|
||||
# specified in the st.cmd file.
|
||||
BIN_INSTALLS = $(MPF_GPIB_BIN)/GpibHideosLocal.o
|
||||
BIN_INSTALLS += $(MPF_GPIB_BIN)/GpibHideosRemote.o
|
||||
|
||||
#Note that the command line that builds the
|
||||
#library $(LIBNAME) may be HUGE (>3kB)
|
||||
#
|
||||
include $(TOP)/config/RULES.Vx
|
||||
#----------------------------------------
|
||||
# ADD RULES AFTER THIS LINE
|
||||
Reference in New Issue
Block a user