lin-epics-modules/motorBase
0
0
Fork 0
forked from epics_driver_modules/motorBase
Code Pull Requests Activity

- Removed IPAC R2.5 and below configuration.

Browse Source 
- Added TCP/IP or UDP/IP ASYN port configuration.
This commit is contained in:
Ron Sluiter
2006-01-31 22:20:02 +00:00
parent 9b76ce302c
commit 9a54da0deb
2 changed files with 40 additions and 130 deletions
Download Patch File Download Diff File Expand all files Collapse all files
iocBoot/iocWithAsyn/st_asynserver.cmd.Vx
+20 -65
View File
@@ -1,70 +1,8 @@
# This configures the ASYN server stuff.
# "#!" marks lines that can be uncommented.
### START of IPAC R2.5 and below ##############################################
#
# Initialize IP carrier
# For MVME162 and MVME172 CPU boards with IP slots.
# ipacAddCarrier(ipac_carrier_t *pcarrier, char *cardParams)
# pcarrier - pointer to carrier driver structure
# cardParams - carrier-specific init parameters
#!carrier = "ipac"
#!ipacAddCarrier(&ipmv162, "A:l=3,3 m=0xe0000000,64;B:l=3,3 m=0xe0010000,64;C:l=3,3 m=0xe0020000,64;D:l=3,3 m=0xe0030000,64")
# For SBS VIPC616-01 IP carrier board. A32 and A24 examples follow:
#!carrier = "VIPC616_01"
# - A32 addressing.
# - default I/O Base Address (0x6000).
# - IP modules occupy 32MB of memory from 0x9000 0000 to 0x91FF FFFF.
# - IP module A at 0x90000000,
# module B at 0x90800000,
# module C at 0x91000000,
# module D at 0x91800000
#!ipacAddCarrier(&vipc616_01, "6000,A0000000")
# - A24 addressing.
# - default I/O Base Address (0x6000).
# - default IP module base address at 0x00D0 0000
# occupies 512 bytes of memory from 0x00D0 0000 to 0x00D0 01FF.
# - IP module A at 0x0x00D0 007F,
# module B at 0x0x00D0 0100,
# module C at 0x0x00D0 017F,
# module D at 0x0x00D0 01FF
#!ipacAddCarrier(&vipc616_01, "0x6000,D00000,128")
# initIpacCarrier(const char *carrierName, int carrierNum)
#!initIpacCarrier(carrier, 0)
#!ipacReport(2)
###############################################################################
# Initialize Octal UART module
#initOctalUART("moduleName","carrierName","carrierSite",nports,intVec)
#!initOctalUART("octalUart0",carrier,"IP_a",8,100)
#!initOctalUART("octalUart1",carrier,"IP_b",8,100)
# initOctalUARTPort(char* portName,char* moduleName,int port,int baud,
# char* parity,int stop_bits,int bits_char,char* flow_control)
# 'baud' is the baud rate. 1200, 2400, 4800, 9600, 19200, 38400
# 'parity' is "E" for even, "O" for odd, "N" for none.
# 'bits_per_character' = {5,6,7,8}
# 'stop_bits' = {1,2}
# 'flow_control' is "N" for none, "H" for hardware
# Port 0 is Generic Serial Record
#!initOctalUARTPort("UART0[0]","octalUart0",0, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART0[1]","octalUart0",1, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART0[2]","octalUart0",2, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART0[3]","octalUart0",3, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART1[0]","octalUart1",0, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART1[1]","octalUart1",1, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART1[2]","octalUart1",2, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART1[3]","octalUart1",3, 9600,"N",1,8,"N")
### END of IPAC R2.5 and below ################################################
### IPAC R2.8 #################################################################
# Initialize the drvIpac carriers.
# -------------------------------
# Initialize the IP carriers; IPAC R2.8
# -------------------------------------
# ipacAdd{CarrierType}(char *cardParams)
# CarrierType - VIPC310, VIPC610, VIPC610_01, VIPC616, VIPC616_01,
# MVME162, or ATC40.
@@ -173,5 +111,22 @@
#!asynSetOption("L1", 0, "clocal", "Y")
#!asynSetOption("L1", 0, "crtscts", "N")
### END of IPAC R2.8 ##########################################################
# TCP/IP or UDP/IP ASYN port configuration.
#
# drvAsynIPPortConfigure("portName", "hostInfo", priority, noAutoConnect,
# noProcessEos)
# (1) portName - The portName that is registered with asynGpib.
# (2) hostInfo - The Internet host name, port number and optional IP protocol
# of the device (e.g. "164.54.9.90:4002", "serials8n3:4002",
# "serials8n3:4002 TCP" or "164.54.17.43:5186 udp"). If no
# protocol is specified, TCP will be used.
# (3) priority - Priority at which the asyn I/O thread will run. If zero or
# missing, then epicsThreadPriorityMedium is used.
# (4) noAutoConnect - Zero or missing indicates that portThread should
# automatically connect. Non-zero if explicit connect
# command must be issued.
# (5) noProcessEos - If 0 then asynInterposeEosConfig is called specifying
# both processEosIn and processEosOut.
#!drvAsynIPPortConfigure("tcp1","164.54.160.124:5001 tcp", 0, 0, 1)
#!drvAsynIPPortConfigure("tcp2","164.54.160.131:5001 tcp", 0, 0, 1)
iocBoot/iocWithMPF/st_asynserver.cmd.Vx
+20 -65
View File
@@ -1,70 +1,8 @@
# This configures the ASYN server stuff.
# "#!" marks lines that can be uncommented.
### START of IPAC R2.5 and below ##############################################
#
# Initialize IP carrier
# For MVME162 and MVME172 CPU boards with IP slots.
# ipacAddCarrier(ipac_carrier_t *pcarrier, char *cardParams)
# pcarrier - pointer to carrier driver structure
# cardParams - carrier-specific init parameters
#!carrier = "ipac"
#!ipacAddCarrier(&ipmv162, "A:l=3,3 m=0xe0000000,64;B:l=3,3 m=0xe0010000,64;C:l=3,3 m=0xe0020000,64;D:l=3,3 m=0xe0030000,64")
# For SBS VIPC616-01 IP carrier board. A32 and A24 examples follow:
#!carrier = "VIPC616_01"
# - A32 addressing.
# - default I/O Base Address (0x6000).
# - IP modules occupy 32MB of memory from 0x9000 0000 to 0x91FF FFFF.
# - IP module A at 0x90000000,
# module B at 0x90800000,
# module C at 0x91000000,
# module D at 0x91800000
#!ipacAddCarrier(&vipc616_01, "6000,A0000000")
# - A24 addressing.
# - default I/O Base Address (0x6000).
# - default IP module base address at 0x00D0 0000
# occupies 512 bytes of memory from 0x00D0 0000 to 0x00D0 01FF.
# - IP module A at 0x0x00D0 007F,
# module B at 0x0x00D0 0100,
# module C at 0x0x00D0 017F,
# module D at 0x0x00D0 01FF
#!ipacAddCarrier(&vipc616_01, "0x6000,D00000,128")
# initIpacCarrier(const char *carrierName, int carrierNum)
#!initIpacCarrier(carrier, 0)
#!ipacReport(2)
###############################################################################
# Initialize Octal UART module
#initOctalUART("moduleName","carrierName","carrierSite",nports,intVec)
#!initOctalUART("octalUart0",carrier,"IP_a",8,100)
#!initOctalUART("octalUart1",carrier,"IP_b",8,100)
# initOctalUARTPort(char* portName,char* moduleName,int port,int baud,
# char* parity,int stop_bits,int bits_char,char* flow_control)
# 'baud' is the baud rate. 1200, 2400, 4800, 9600, 19200, 38400
# 'parity' is "E" for even, "O" for odd, "N" for none.
# 'bits_per_character' = {5,6,7,8}
# 'stop_bits' = {1,2}
# 'flow_control' is "N" for none, "H" for hardware
# Port 0 is Generic Serial Record
#!initOctalUARTPort("UART0[0]","octalUart0",0, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART0[1]","octalUart0",1, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART0[2]","octalUart0",2, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART0[3]","octalUart0",3, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART1[0]","octalUart1",0, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART1[1]","octalUart1",1, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART1[2]","octalUart1",2, 9600,"N",1,8,"N")
#!initOctalUARTPort("UART1[3]","octalUart1",3, 9600,"N",1,8,"N")
### END of IPAC R2.5 and below ################################################
### IPAC R2.8 #################################################################
# Initialize the drvIpac carriers.
# -------------------------------
# Initialize the IP carriers; IPAC R2.8
# -------------------------------------
# ipacAdd{CarrierType}(char *cardParams)
# CarrierType - VIPC310, VIPC610, VIPC610_01, VIPC616, VIPC616_01,
# MVME162, or ATC40.
@@ -173,5 +111,22 @@
#!asynSetOption("L1", 0, "clocal", "Y")
#!asynSetOption("L1", 0, "crtscts", "N")
### END of IPAC R2.8 ##########################################################
# TCP/IP or UDP/IP ASYN port configuration.
#
# drvAsynIPPortConfigure("portName", "hostInfo", priority, noAutoConnect,
# noProcessEos)
# (1) portName - The portName that is registered with asynGpib.
# (2) hostInfo - The Internet host name, port number and optional IP protocol
# of the device (e.g. "164.54.9.90:4002", "serials8n3:4002",
# "serials8n3:4002 TCP" or "164.54.17.43:5186 udp"). If no
# protocol is specified, TCP will be used.
# (3) priority - Priority at which the asyn I/O thread will run. If zero or
# missing, then epicsThreadPriorityMedium is used.
# (4) noAutoConnect - Zero or missing indicates that portThread should
# automatically connect. Non-zero if explicit connect
# command must be issued.
# (5) noProcessEos - If 0 then asynInterposeEosConfig is called specifying
# both processEosIn and processEosOut.
#!drvAsynIPPortConfigure("tcp1","164.54.160.124:5001 tcp", 0, 0, 1)
#!drvAsynIPPortConfigure("tcp2","164.54.160.131:5001 tcp", 0, 0, 1)