Switching to OS specific st.cmd files.

iocBoot/iocNoAsyn/st.cmd.Vx

@@ -0,0 +1,38 @@
+# This example if for OMS VME8/44 controllers.  Since OMS controllers
+# communicate across the VME backplace, this example does not require
+# MPF.
+
+#The following must be added for many board support packages
+#cd "... IOC st.cmd complete directory path ... "
+
+< cdCommands
+ #< ../nfsCommands
+
+cd topbin
+
+# If the VxWorks kernel was built using the project facility, the following must
+# be added before any C++ code is loaded (see SPR #28980).
+sysCplusEnable=1
+
+ld < NoMPFVx.munch
+
+cd startup
+dbLoadDatabase("../../dbd/NoMPFVx.dbd")
+registerRecordDeviceDriver(pdbbase)
+
+dbLoadRecords("../../db/NoMPF.db")
+#dbLoadRecords("../../motorExApp/Db/SoftMotorEx.db","user=rls,motor=m1", startup)
+
+# OMS VME driver setup parameters: 
+#     (1)cards, (2)axes per card, (3)base address(short, 16-byte boundary), 
+#     (4)interrupt vector (0=disable or  64 - 255), (5)interrupt level (1 - 6),
+#     (6)motor task polling rate (min=1Hz,max=60Hz)
+#omsSetup(1, 8, 0xFC00, 180, 5, 10)
+
+# OMS VME58 driver setup parameters: 
+#     (1)cards, (2)axes per card, (3)base address(short, 4k boundary), 
+#     (4)interrupt vector (0=disable or  64 - 255), (5)interrupt level (1 - 6),
+#     (6)motor task polling rate (min=1Hz,max=60Hz)
+oms58Setup(1, 8, 0x1000, 190, 5, 10)
+
+iocInit

iocBoot/iocNoAsyn/st.cmd.unix

@@ -0,0 +1,14 @@
+# This example if for running a motor record that uses Soft Channel device
+# support on a Unix host.  This example does not require MPF.
+
+# Start errlog Task before any possible error messsage to prevent
+# erroneous "Interrupted system call" message on Linux OS host.
+errlogInit(0)
+
+dbLoadDatabase("../../dbd/NoMPF.dbd")
+registerRecordDeviceDriver(pdbbase)
+
+#dbLoadRecords("../../db/NoMPF.db")
+dbLoadRecords("../../motorExApp/Db/softMotorTest.db","user=rls")
+
+iocInit

iocBoot/iocNoMPF/st.cmd.Vx

@@ -0,0 +1,38 @@
+# This example if for OMS VME8/44 controllers.  Since OMS controllers
+# communicate across the VME backplace, this example does not require
+# MPF.
+
+#The following must be added for many board support packages
+#cd "... IOC st.cmd complete directory path ... "
+
+< cdCommands
+ #< ../nfsCommands
+
+cd topbin
+
+# If the VxWorks kernel was built using the project facility, the following must
+# be added before any C++ code is loaded (see SPR #28980).
+sysCplusEnable=1
+
+ld < NoMPFVx.munch
+
+cd startup
+dbLoadDatabase("../../dbd/NoMPFVx.dbd")
+registerRecordDeviceDriver(pdbbase)
+
+dbLoadRecords("../../db/NoMPF.db")
+#dbLoadRecords("../../motorExApp/Db/SoftMotorEx.db","user=rls,motor=m1", startup)
+
+# OMS VME driver setup parameters: 
+#     (1)cards, (2)axes per card, (3)base address(short, 16-byte boundary), 
+#     (4)interrupt vector (0=disable or  64 - 255), (5)interrupt level (1 - 6),
+#     (6)motor task polling rate (min=1Hz,max=60Hz)
+#omsSetup(1, 8, 0xFC00, 180, 5, 10)
+
+# OMS VME58 driver setup parameters: 
+#     (1)cards, (2)axes per card, (3)base address(short, 4k boundary), 
+#     (4)interrupt vector (0=disable or  64 - 255), (5)interrupt level (1 - 6),
+#     (6)motor task polling rate (min=1Hz,max=60Hz)
+oms58Setup(1, 8, 0x1000, 190, 5, 10)
+
+iocInit

iocBoot/iocNoMPF/st.cmd.unix

@@ -0,0 +1,14 @@
+# This example if for running a motor record that uses Soft Channel device
+# support on a Unix host.  This example does not require MPF.
+
+# Start errlog Task before any possible error messsage to prevent
+# erroneous "Interrupted system call" message on Linux OS host.
+errlogInit(0)
+
+dbLoadDatabase("../../dbd/NoMPF.dbd")
+registerRecordDeviceDriver(pdbbase)
+
+#dbLoadRecords("../../db/NoMPF.db")
+dbLoadRecords("../../motorExApp/Db/softMotorTest.db","user=rls")
+
+iocInit