PlugNPLay: autoconnect with disconnectOnReadtimeout working

db/epluse.db

@@ -18,3 +18,12 @@ record(ai, "$(PREFIX):RELHUM")
    field(EGU, "%RH")
 }
 
+record(asyn,"$(PREFIX):ASYN")
+{
+    field(DTYP,"asynRecordDevice")
+    field(PORT,"$(PORT)")
+    field(ADDR,"-1")
+    field(TMOD, "NoI/O")
+    field(TMOT, -1.0)
+}
+

db/epluse.proto

@@ -3,8 +3,11 @@
 
 Terminator = '';
 ReplyTimeout = 3000;
+LockTimeout = 5000;
+ReadTimeout = 2000;
+MaxInput = 15;
 # Remove if we can fix the occasional null byte being sent
-ExtraInput = Ignore
+#ExtraInput = Ignore;
 
 # unsolicited weight message
 fetch_rht {
@@ -12,7 +15,7 @@ fetch_rht {
     # 3rd byte is command, fetch rht values
     # 4th byte length of message, 2 bytes
     # 5th and 6th byte, data. For this case it is 1
-    
+
     out 0x00 0x00 0x67 0x02 0x00 0x01 0x6a;
     # First 2 bytes is address
     # 0xca8b is the unit at neutra
@@ -27,5 +30,5 @@ fetch_rht {
     # I try to handle this with with ?*c command, but it doesn't work
     # Possibly check with Dirk sometime how to make this work, if possible
     # For now ignore extra data
-    in 0xca 0x8b 0x67 0x0A 0x06 0x00 "%(\$1:TEMP)#R%(\$1:RELHUM)#R%*c%*?1c";  
+    in 0xca 0x8b 0x67 0x0A 0x06 0x00 "%(\$1:TEMP)#R%(\$1:RELHUM)#R%<sum8>";
 }

epluse.cmd

@@ -7,6 +7,10 @@ require stream
 
 epicsEnvSet("PROTO", "$(epluse_DB)epluse.proto")
 
-drvAsynIPPortConfigure("$(INSTR)-sps", "$(MOXA_ADDR)",0,0,0)
+### We have autoconnect and disconnectOnReadTimeout enabled, so that it can come and go
+## without generating too much noise. We detect connected state via asyn record .CNCT
+# drvAsynIPPortConfigure(portName, hostInfo, priority, noAutoConnect, noProcessEos)
+drvAsynIPPortConfigure("$(INSTR)-epluse", "$(MOXA_ADDR)",0,0,0)
+asynSetOption("$(INSTR)-epluse", -1, "disconnectOnReadTimeout", "Y")
 
-dbLoadRecords("$(epluse_DB)epluse.db", "PREFIX=SQ:$(INSTR), PROTO=$(PROTO), PORT=$(INSTR)-sps")
+dbLoadRecords("$(epluse_DB)epluse.db", "PREFIX=SQ:$(INSTR), PROTO=$(PROTO), PORT=$(INSTR)-epluse")