New file

iocs/andorIOC/configure/CONFIG

@@ -0,0 +1,29 @@
+# CONFIG - Load build configuration data
+#
+# Do not make changes to this file!
+
+# Allow user to override where the build rules come from
+RULES = $(EPICS_BASE)
+
+# RELEASE files point to other application tops
+include $(TOP)/configure/RELEASE
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+-include $(TOP)/configure/RELEASE.Common.$(T_A)
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+
+CONFIG = $(RULES)/configure
+include $(CONFIG)/CONFIG
+
+# Override the Base definition:
+INSTALL_LOCATION = $(TOP)
+
+# CONFIG_SITE files contain other build configuration settings
+include $(TOP)/configure/CONFIG_SITE
+-include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+ -include $(TOP)/configure/CONFIG_SITE.Common.$(T_A)
+ -include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+

iocs/andorIOC/configure/CONFIG_SITE

@@ -0,0 +1,42 @@
+# CONFIG_SITE
+
+# Make any application-specific changes to the EPICS build
+#   configuration variables in this file.
+#
+# Host/target specific settings can be specified in files named
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+#   CONFIG_SITE.Common.$(T_A)
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+
+# CHECK_RELEASE controls the consistency checking of the support
+#   applications pointed to by the RELEASE* files.
+# Normally CHECK_RELEASE should be set to YES.
+# Set CHECK_RELEASE to NO to disable checking completely.
+# Set CHECK_RELEASE to WARN to perform consistency checking but
+#   continue building anyway if conflicts are found.
+CHECK_RELEASE = YES
+
+# Set this when you only want to compile this application
+#   for a subset of the cross-compiled target architectures
+#   that Base is built for.
+#CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040
+
+# To install files into a location other than $(TOP) define
+#   INSTALL_LOCATION here.
+#INSTALL_LOCATION=</path/name/to/install/top>
+
+# Set this when your IOC and the host use different paths
+#   to access the application. This will be needed to boot
+#   from a Microsoft FTP server or with some NFS mounts.
+# You must rebuild in the iocBoot directory for this to
+#   take effect.
+#IOCS_APPL_TOP = </IOC/path/to/application/top>
+
+# Get settings from AREA_DETECTOR, so we only have to configure once for all detectors if we want to
+-include $(AREA_DETECTOR)/configure/CONFIG_SITE
+-include $(AREA_DETECTOR)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH)
+-include $(AREA_DETECTOR)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+  -include $(AREA_DETECTOR)/configure/CONFIG_SITE.Common.$(T_A)
+  -include $(AREA_DETECTOR)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+endif

iocs/andorIOC/configure/CONFIG_SITE.Common.linux-x86

@@ -0,0 +1,7 @@
+# There is a problem when building dynamically on our linux-x86 system, due to functions called in PvAPI.a.
+
+# These can be fixed either by building statically with this line:
+#STATIC_BUILD=YES
+# Or by building dynamically with this line:
+PROD_SYS_LIBS += pthread rt
+

iocs/andorIOC/configure/Makefile

@@ -0,0 +1,8 @@
+TOP=..
+
+include $(TOP)/configure/CONFIG
+
+TARGETS = $(CONFIG_TARGETS)
+CONFIGS += $(subst ../,,$(wildcard $(CONFIG_INSTALLS)))
+
+include $(TOP)/configure/RULES

iocs/andorIOC/configure/RELEASE

@@ -0,0 +1,12 @@
+#RELEASE Location of external products
+# Run "gnumake clean uninstall install" in the application
+# top directory each time this file is changed.
+
+ADANDOR=$(AREA_DETECTOR)/ADAndor
+
+-include $(TOP)/../../../RELEASE_PATHS.local
+-include $(TOP)/../../../RELEASE_PATHS.local.$(EPICS_HOST_ARCH)
+-include $(TOP)/../../../RELEASE_PRODS.local
+-include $(TOP)/RELEASE.local
+-include $(TOP)/configure/RELEASE.local
+

iocs/andorIOC/configure/RULES

@@ -0,0 +1,6 @@
+# RULES
+
+include $(CONFIG)/RULES
+
+# Library should be rebuilt because LIBOBJS may have changed.
+$(LIBNAME): ../Makefile

iocs/andorIOC/configure/RULES.ioc

@@ -0,0 +1,2 @@
+#RULES.ioc
+include $(CONFIG)/RULES.ioc

iocs/andorIOC/configure/RULES_DIRS

@@ -0,0 +1,2 @@
+#RULES_DIRS
+include $(CONFIG)/RULES_DIRS

iocs/andorIOC/configure/RULES_TOP

@@ -0,0 +1,3 @@
+#RULES_TOP
+include $(CONFIG)/RULES_TOP
+