Use EPICS data types
This commit is contained in:
Mark Rivers
+201
-197
@@ -1,3 +1,7 @@
|
||||
// SPEHeader.h.
|
||||
// Mark Rivers, April 12, 2014
|
||||
// This file originally was CHeader.h from Princeton Instruments.
|
||||
// Modified to be OS-independent by using EPICS types.
|
||||
// CHeader.h : definition of WinX/32 (CSMA-style) file header
|
||||
//
|
||||
// Copyright (C) 1997-2000 Roper Scientific
|
||||
@@ -36,10 +40,10 @@
|
||||
*/
|
||||
/////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
#if !defined(CHEADER_H)
|
||||
#define CHEADER_H /* define shows that include is now done */
|
||||
#if !defined(SPEHEADER_H)
|
||||
#define SPEHEADER_H /* define shows that include is now done */
|
||||
|
||||
#include "bvstruct.h"
|
||||
/*#include "bvstruct.h" */
|
||||
|
||||
/* NOTE: the following values should not change, otherwise the header will */
|
||||
/* be bleeped up. */
|
||||
@@ -86,207 +90,207 @@ enum CSCTRLTYPE {
|
||||
|
||||
typedef struct tagROIinfo // ROI information
|
||||
{
|
||||
WORD startx; // left x start value.
|
||||
WORD endx; // right x value.
|
||||
WORD groupx; // amount x is binned/grouped in hw.
|
||||
WORD starty; // top y start value.
|
||||
WORD endy; // bottom y value.
|
||||
WORD groupy; // amount y is binned/grouped in hw.
|
||||
epicsUInt16 startx; // left x start value.
|
||||
epicsUInt16 endx; // right x value.
|
||||
epicsUInt16 groupx; // amount x is binned/grouped in hw.
|
||||
epicsUInt16 starty; // top y start value.
|
||||
epicsUInt16 endy; // bottom y value.
|
||||
epicsUInt16 groupy; // amount y is binned/grouped in hw.
|
||||
} ROIinfo; // 12 Bytes Each
|
||||
|
||||
typedef struct tagCSMAHEAD {
|
||||
#ifdef __cplusplus // STARTING
|
||||
tagCSMAHEAD(); // ADDRESS
|
||||
#endif // (decimal)
|
||||
SHORT ControllerVersion; // 0 Hardware Version
|
||||
SHORT LogicOutput; // 2 Definition of Output BNC
|
||||
WORD AmpHiCapLowNoise; // 4 Amp Switching Mode
|
||||
WORD xDimDet; // 6 Detector x dimension of chip.
|
||||
SHORT mode; // 8 timing mode
|
||||
float exp_sec; // 10 alternitive exposure, in sec.
|
||||
SHORT VChipXdim; // 14 Virtual Chip X dim
|
||||
SHORT VChipYdim; // 16 Virtual Chip Y dim
|
||||
WORD yDimDet; // 18 y dimension of CCD or detector.
|
||||
char date[DATEMAX]; // 20 date
|
||||
SHORT VirtualChipFlag; // 30 On/Off
|
||||
char Spare_1[2]; // 32
|
||||
SHORT noscan; // 34 Old number of scans - should always be -1
|
||||
float DetTemperature; // 36 Detector Temperature Set
|
||||
SHORT DetType; // 40 CCD/DiodeArray type
|
||||
WORD xdim; // 42 actual # of pixels on x axis
|
||||
SHORT stdiode; // 44 trigger diode
|
||||
float DelayTime; // 46 Used with Async Mode
|
||||
WORD ShutterControl; // 50 Normal, Disabled Open, Disabled Closed
|
||||
SHORT AbsorbLive; // 52 On/Off
|
||||
WORD AbsorbMode; // 54 Reference Strip or File
|
||||
SHORT CanDoVirtualChipFlag; // 56 T/F Cont/Chip able to do Virtual Chip
|
||||
SHORT ThresholdMinLive; // 58 On/Off
|
||||
float ThresholdMinVal; // 60 Threshold Minimum Value
|
||||
SHORT ThresholdMaxLive; // 64 On/Off
|
||||
float ThresholdMaxVal; // 66 Threshold Maximum Value
|
||||
SHORT SpecAutoSpectroMode; // 70 T/F Spectrograph Used
|
||||
float SpecCenterWlNm; // 72 Center Wavelength in Nm
|
||||
SHORT SpecGlueFlag; // 76 T/F File is Glued
|
||||
float SpecGlueStartWlNm; // 78 Starting Wavelength in Nm
|
||||
float SpecGlueEndWlNm; // 82 Starting Wavelength in Nm
|
||||
float SpecGlueMinOvrlpNm; // 86 Minimum Overlap in Nm
|
||||
float SpecGlueFinalResNm; // 90 Final Resolution in Nm
|
||||
SHORT PulserType; // 94 0=None, PG200=1, PTG=2, DG535=3
|
||||
SHORT CustomChipFlag; // 96 T/F Custom Chip Used
|
||||
SHORT XPrePixels; // 98 Pre Pixels in X direction
|
||||
SHORT XPostPixels; // 100 Post Pixels in X direction
|
||||
SHORT YPrePixels; // 102 Pre Pixels in Y direction
|
||||
SHORT YPostPixels; // 104 Post Pixels in Y direction
|
||||
SHORT asynen; // 106 asynchron enable flag 0 = off
|
||||
SHORT datatype; // 108 experiment datatype
|
||||
// 0 = FLOATING POINT
|
||||
// 1 = LONG INTEGER
|
||||
// 2 = INTEGER
|
||||
// 3 = UNSIGNED INTEGER
|
||||
SHORT PulserMode; // 110 Repetitive/Sequential
|
||||
USHORT PulserOnChipAccums; // 112 Num PTG On-Chip Accums
|
||||
DWORD PulserRepeatExp; // 114 Num Exp Repeats (Pulser SW Accum)
|
||||
float PulseRepWidth; // 118 Width Value for Repetitive pulse (usec)
|
||||
float PulseRepDelay; // 122 Width Value for Repetitive pulse (usec)
|
||||
float PulseSeqStartWidth; // 126 Start Width for Sequential pulse (usec)
|
||||
float PulseSeqEndWidth; // 130 End Width for Sequential pulse (usec)
|
||||
float PulseSeqStartDelay; // 134 Start Delay for Sequential pulse (usec)
|
||||
float PulseSeqEndDelay; // 138 End Delay for Sequential pulse (usec)
|
||||
SHORT PulseSeqIncMode; // 142 Increments: 1=Fixed, 2=Exponential
|
||||
SHORT PImaxUsed; // 144 PI-Max type controller flag
|
||||
SHORT PImaxMode; // 146 PI-Max mode
|
||||
SHORT PImaxGain; // 148 PI-Max Gain
|
||||
SHORT BackGrndApplied; // 150 1 if background subtraction done
|
||||
SHORT PImax2nsBrdUsed; // 152 T/F PI-Max 2ns Board Used
|
||||
WORD minblk; // 154 min. # of strips per skips
|
||||
WORD numminblk; // 156 # of min-blocks before geo skps
|
||||
SHORT SpecMirrorLocation[2]; // 158 Spectro Mirror Location, 0=Not Present
|
||||
SHORT SpecSlitLocation[4]; // 162 Spectro Slit Location, 0=Not Present
|
||||
SHORT CustomTimingFlag; // 170 T/F Custom Timing Used
|
||||
char ExperimentTimeLocal[TIMEMAX];// 172 Experiment Local Time as hhmmss\0
|
||||
char ExperimentTimeUTC[TIMEMAX]; // 179 Experiment UTC Time as hhmmss\0
|
||||
SHORT ExposUnits; // 186 User Units for Exposure
|
||||
WORD ADCoffset; // 188 ADC offset
|
||||
WORD ADCrate; // 190 ADC rate
|
||||
WORD ADCtype; // 192 ADC type
|
||||
WORD ADCresolution; // 194 ADC resolution
|
||||
WORD ADCbitAdjust; // 196 ADC bit adjust
|
||||
WORD gain; // 198 gain
|
||||
char Comments[5][COMMENTMAX];// 200 File Comments
|
||||
WORD geometric; // 600 geometric ops: rotate 0x01,
|
||||
// reverse 0x02, flip 0x04
|
||||
char xlabel[LABELMAX]; // 602 intensity display string
|
||||
WORD cleans; // 618 cleans
|
||||
WORD NumSkpPerCln; // 620 number of skips per clean.
|
||||
SHORT SpecMirrorPos[2]; // 622 Spectrograph Mirror Positions
|
||||
float SpecSlitPos[4]; // 626 Spectrograph Slit Positions
|
||||
SHORT AutoCleansActive; // 642 T/F
|
||||
SHORT UseContCleansInst; // 644 T/F
|
||||
SHORT AbsorbStripNum; // 646 Absorbance Strip Number
|
||||
SHORT SpecSlitPosUnits; // 648 Spectrograph Slit Position Units
|
||||
float SpecGrooves; // 650 Spectrograph Grating Grooves
|
||||
SHORT srccmp; // 654 number of source comp. diodes
|
||||
WORD ydim; // 656 y dimension of raw data.
|
||||
SHORT scramble; // 658 0=scrambled,1=unscrambled
|
||||
SHORT ContinuousCleansFlag; // 660 T/F Continuous Cleans Timing Option
|
||||
SHORT ExternalTriggerFlag; // 662 T/F External Trigger Timing Option
|
||||
long lnoscan; // 664 Number of scans (Early WinX)
|
||||
long lavgexp; // 668 Number of Accumulations
|
||||
float ReadoutTime; // 672 Experiment readout time
|
||||
SHORT TriggeredModeFlag; // 676 T/F Triggered Timing Option
|
||||
char Spare_2[10]; // 678
|
||||
char sw_version[FILEVERMAX]; // 688 Version of SW creating this file
|
||||
SHORT type; // 704 0=1000,1=new120,2=old120,3=130,
|
||||
// st121=4,st138=5,dc131(PentaMax)=6,
|
||||
// st133(MicroMax)=7,st135(GPIB)=8,
|
||||
// VICCD=9, ST116(GPIB)=10,
|
||||
// OMA3(GPIB)=11,OMA4=12
|
||||
SHORT flatFieldApplied; // 706 1 if flat field was applied.
|
||||
char Spare_3[16]; // 708
|
||||
SHORT kin_trig_mode; // 724 Kinetics Trigger Mode
|
||||
char dlabel[LABELMAX]; // 726 Data label.
|
||||
char Spare_4[436]; // 742
|
||||
char PulseFileName[HDRNAMEMAX]; // 1178 Name of Pulser File with
|
||||
// Pulse Widths/Delays (for Z-Slice)
|
||||
char AbsorbFileName[HDRNAMEMAX]; // 1298 Name of Absorbance File (if File Mode)
|
||||
DWORD NumExpRepeats; // 1418 Number of Times experiment repeated
|
||||
DWORD NumExpAccums; // 1422 Number of Time experiment accumulated
|
||||
SHORT YT_Flag; // 1426 Set to 1 if this file contains YT data
|
||||
float clkspd_us; // 1428 Vert Clock Speed in micro-sec
|
||||
SHORT HWaccumFlag; // 1432 set to 1 if accum done by Hardware.
|
||||
SHORT StoreSync; // 1434 set to 1 if store sync used.
|
||||
SHORT BlemishApplied; // 1436 set to 1 if blemish removal applied.
|
||||
SHORT CosmicApplied; // 1438 set to 1 if cosmic ray removal applied
|
||||
SHORT CosmicType; // 1440 if cosmic ray applied, this is type.
|
||||
float CosmicThreshold; // 1442 Threshold of cosmic ray removal.
|
||||
long NumFrames; // 1446 number of frames in file.
|
||||
float MaxIntensity; // 1450 max intensity of data (future)
|
||||
float MinIntensity; // 1454 min intensity of data (future)
|
||||
char ylabel[LABELMAX]; // 1458 y axis label.
|
||||
WORD ShutterType; // 1474 shutter type.
|
||||
float shutterComp; // 1476 shutter compensation time.
|
||||
WORD readoutMode; // 1480 readout mode, full,kinetics, etc
|
||||
WORD WindowSize; // 1482 window size for kinetics only.
|
||||
WORD clkspd; // 1484 clock speed for kinetics & frame transfer.
|
||||
WORD interface_type; // 1486 computer interface
|
||||
// (isa-taxi, pci, eisa, etc.)
|
||||
SHORT NumROIsInExperiment; // 1488 May be more than the 10 allowed in
|
||||
// this header (if 0, assume 1)
|
||||
char Spare_5[16]; // 1490
|
||||
WORD controllerNum; // 1506 if multiple controller system will
|
||||
// have controller number data came from.
|
||||
// this is a future item.
|
||||
WORD SWmade; // 1508 Which software package created this file
|
||||
SHORT NumROI; // 1510 number of ROIs used. if 0 assume 1.
|
||||
ROIinfo ROIinfoblk[ROIMAX]; // 1512 ROI information
|
||||
char FlatField[HDRNAMEMAX]; // 1632 Flat field file name.
|
||||
char background[HDRNAMEMAX]; // 1752 background sub. file name.
|
||||
char blemish[HDRNAMEMAX]; // 1872 blemish file name.
|
||||
float file_header_ver; // 1992 version of this file header
|
||||
char YT_Info[1000]; // 1996-2996 Reserved for YT information
|
||||
LONG WinView_id; // 2996 == 0x01234567L if in use by WinView
|
||||
struct { // X Y
|
||||
double offset; // 3000 3489 offset for absolut data scaling
|
||||
double factor; // 3008 3497 factor for absolut data scaling
|
||||
char current_unit; // 3016 3505 selected scaling unit
|
||||
char CalibReserved1; // 3017 3506 reserved
|
||||
char display_string[40]; // 3018 3507 string used for drawing axes...
|
||||
char CalibReserved2[40]; // 3058 3547 reserved
|
||||
char calib_valid; // 3098 3587 flag if calibration is valid
|
||||
char input_unit; // 3099 3588 current input units for "calib_value"
|
||||
char polynounit; // 3100 3589 linear UNIT and used in the "polynocoeff"
|
||||
char polynoorder; // 3101 3590 ORDER of calibration POLYNOM
|
||||
char calib_count; // 3102 3591 valid calibration data pairs
|
||||
double pixel_position[10]; // 3103 3592 pixel pos. of calibration data
|
||||
double calib_value[10]; // 3183 3672 calibration VALUE at above pos
|
||||
double polynocoeff[6]; // 3263 3752 polynom COEFFICIENTS
|
||||
double laser_position; // 3311 3800 laser wavenumber for relativ WN
|
||||
char CalibReserved3; // 3319 3808 reserved
|
||||
BYTE leftover_flag; // 3320 3809 not used.
|
||||
char user_label[40]; // 3321 3810 Calibration label
|
||||
char expansion[128]; // 3361 3850 Expansion area
|
||||
} xcalibration, // 3000 -> 3488 X axis calibration
|
||||
ycalibration; // 3489 -> 3977 Y axis calibration
|
||||
char Istring[40]; // 3978 special intensity scaling string
|
||||
char Spare_6[25]; // 4018
|
||||
BYTE SpecType; // 4043 spectrometer type (acton, spex, etc.)
|
||||
BYTE SpecModel; // 4044 spectrometer model (type dependent)
|
||||
BYTE PulseBurstUsed; // 4045 pulser burst mode on/off
|
||||
DWORD PulseBurstCount; // 4046 pulser triggers per burst
|
||||
double PulseBurstPeriod; // 4050 pulser burst period (in usec)
|
||||
BYTE PulseBracketUsed; // 4058 pulser bracket pulsing on/off
|
||||
BYTE PulseBracketType; // 4059 pulser bracket pulsing type
|
||||
double PulseTimeConstFast; // 4060 pulser slow exponential time constant (in usec)
|
||||
double PulseAmplitudeFast; // 4068 pulser fast exponential amplitude constant
|
||||
double PulseTimeConstSlow; // 4076 pulser slow exponential time constant (in usec)
|
||||
double PulseAmplitudeSlow; // 4084 pulser slow exponential amplitude constant
|
||||
SHORT AnalogGain; // 4092 analog gain
|
||||
SHORT AvGainUsed; // 4094 avalanche gain was used
|
||||
SHORT AvGain; // 4096 avalanche gain value
|
||||
SHORT lastvalue; // 4098 Always the LAST value in the header
|
||||
} CSMAHead; // 4100 Bytes Total Header Size
|
||||
epicsInt16 ControllerVersion; // 0 Hardware Version
|
||||
epicsInt16 LogicOutput; // 2 Definition of Output BNC
|
||||
epicsUInt16 AmpHiCapLowNoise; // 4 Amp Switching Mode
|
||||
epicsUInt16 xDimDet; // 6 Detector x dimension of chip.
|
||||
epicsInt16 mode; // 8 timing mode
|
||||
epicsFloat32 exp_sec; // 10 alternitive exposure, in sec.
|
||||
epicsInt16 VChipXdim; // 14 Virtual Chip X dim
|
||||
epicsInt16 VChipYdim; // 16 Virtual Chip Y dim
|
||||
epicsUInt16 yDimDet; // 18 y dimension of CCD or detector.
|
||||
char date[DATEMAX]; // 20 date
|
||||
epicsInt16 VirtualChipFlag; // 30 On/Off
|
||||
char Spare_1[2]; // 32
|
||||
epicsInt16 noscan; // 34 Old number of scans - should always be -1
|
||||
epicsFloat32 DetTemperature; // 36 Detector Temperature Set
|
||||
epicsInt16 DetType; // 40 CCD/DiodeArray type
|
||||
epicsUInt16 xdim; // 42 actual # of pixels on x axis
|
||||
epicsInt16 stdiode; // 44 trigger diode
|
||||
epicsFloat32 DelayTime; // 46 Used with Async Mode
|
||||
epicsUInt16 ShutterControl; // 50 Normal, Disabled Open, Disabled Closed
|
||||
epicsInt16 AbsorbLive; // 52 On/Off
|
||||
epicsUInt16 AbsorbMode; // 54 Reference Strip or File
|
||||
epicsInt16 CanDoVirtualChipFlag; // 56 T/F Cont/Chip able to do Virtual Chip
|
||||
epicsInt16 ThresholdMinLive; // 58 On/Off
|
||||
epicsFloat32 ThresholdMinVal; // 60 Threshold Minimum Value
|
||||
epicsInt16 ThresholdMaxLive; // 64 On/Off
|
||||
epicsFloat32 ThresholdMaxVal; // 66 Threshold Maximum Value
|
||||
epicsInt16 SpecAutoSpectroMode; // 70 T/F Spectrograph Used
|
||||
epicsFloat32 SpecCenterWlNm; // 72 Center Wavelength in Nm
|
||||
epicsInt16 SpecGlueFlag; // 76 T/F File is Glued
|
||||
epicsFloat32 SpecGlueStartWlNm; // 78 Starting Wavelength in Nm
|
||||
epicsFloat32 SpecGlueEndWlNm; // 82 Starting Wavelength in Nm
|
||||
epicsFloat32 SpecGlueMinOvrlpNm; // 86 Minimum Overlap in Nm
|
||||
epicsFloat32 SpecGlueFinalResNm; // 90 Final Resolution in Nm
|
||||
epicsInt16 PulserType; // 94 0=None, PG200=1, PTG=2, DG535=3
|
||||
epicsInt16 CustomChipFlag; // 96 T/F Custom Chip Used
|
||||
epicsInt16 XPrePixels; // 98 Pre Pixels in X direction
|
||||
epicsInt16 XPostPixels; // 100 Post Pixels in X direction
|
||||
epicsInt16 YPrePixels; // 102 Pre Pixels in Y direction
|
||||
epicsInt16 YPostPixels; // 104 Post Pixels in Y direction
|
||||
epicsInt16 asynen; // 106 asynchron enable flag 0 = off
|
||||
epicsInt16 datatype; // 108 experiment datatype
|
||||
// 0 = FLOATING POINT
|
||||
// 1 = LONG INTEGER
|
||||
// 2 = INTEGER
|
||||
// 3 = UNSIGNED INTEGER
|
||||
epicsInt16 PulserMode; // 110 Repetitive/Sequential
|
||||
epicsUInt16 PulserOnChipAccums; // 112 Num PTG On-Chip Accums
|
||||
epicsUInt32 PulserRepeatExp; // 114 Num Exp Repeats (Pulser SW Accum)
|
||||
epicsFloat32 PulseRepWidth; // 118 Width Value for Repetitive pulse (usec)
|
||||
epicsFloat32 PulseRepDelay; // 122 Width Value for Repetitive pulse (usec)
|
||||
epicsFloat32 PulseSeqStartWidth; // 126 Start Width for Sequential pulse (usec)
|
||||
epicsFloat32 PulseSeqEndWidth; // 130 End Width for Sequential pulse (usec)
|
||||
epicsFloat32 PulseSeqStartDelay; // 134 Start Delay for Sequential pulse (usec)
|
||||
epicsFloat32 PulseSeqEndDelay; // 138 End Delay for Sequential pulse (usec)
|
||||
epicsInt16 PulseSeqIncMode; // 142 Increments: 1=Fixed, 2=Exponential
|
||||
epicsInt16 PImaxUsed; // 144 PI-Max type controller flag
|
||||
epicsInt16 PImaxMode; // 146 PI-Max mode
|
||||
epicsInt16 PImaxGain; // 148 PI-Max Gain
|
||||
epicsInt16 BackGrndApplied; // 150 1 if background subtraction done
|
||||
epicsInt16 PImax2nsBrdUsed; // 152 T/F PI-Max 2ns Board Used
|
||||
epicsUInt16 minblk; // 154 min. # of strips per skips
|
||||
epicsUInt16 numminblk; // 156 # of min-blocks before geo skps
|
||||
epicsInt16 SpecMirrorLocation[2]; // 158 Spectro Mirror Location, 0=Not Present
|
||||
epicsInt16 SpecSlitLocation[4]; // 162 Spectro Slit Location, 0=Not Present
|
||||
epicsInt16 CustomTimingFlag; // 170 T/F Custom Timing Used
|
||||
char ExperimentTimeLocal[TIMEMAX];// 172 Experiment Local Time as hhmmss\0
|
||||
char ExperimentTimeUTC[TIMEMAX]; // 179 Experiment UTC Time as hhmmss\0
|
||||
epicsInt16 ExposUnits; // 186 User Units for Exposure
|
||||
epicsUInt16 ADCoffset; // 188 ADC offset
|
||||
epicsUInt16 ADCrate; // 190 ADC rate
|
||||
epicsUInt16 ADCtype; // 192 ADC type
|
||||
epicsUInt16 ADCresolution; // 194 ADC resolution
|
||||
epicsUInt16 ADCbitAdjust; // 196 ADC bit adjust
|
||||
epicsUInt16 gain; // 198 gain
|
||||
char Comments[5][COMMENTMAX];// 200 File Comments
|
||||
epicsUInt16 geometric; // 600 geometric ops: rotate 0x01,
|
||||
// reverse 0x02, flip 0x04
|
||||
char xlabel[LABELMAX]; // 602 intensity display string
|
||||
epicsUInt16 cleans; // 618 cleans
|
||||
epicsUInt16 NumSkpPerCln; // 620 number of skips per clean.
|
||||
epicsInt16 SpecMirrorPos[2]; // 622 Spectrograph Mirror Positions
|
||||
epicsFloat32 SpecSlitPos[4]; // 626 Spectrograph Slit Positions
|
||||
epicsInt16 AutoCleansActive; // 642 T/F
|
||||
epicsInt16 UseContCleansInst; // 644 T/F
|
||||
epicsInt16 AbsorbStripNum; // 646 Absorbance Strip Number
|
||||
epicsInt16 SpecSlitPosUnits; // 648 Spectrograph Slit Position Units
|
||||
epicsFloat32 SpecGrooves; // 650 Spectrograph Grating Grooves
|
||||
epicsInt16 srccmp; // 654 number of source comp. diodes
|
||||
epicsUInt16 ydim; // 656 y dimension of raw data.
|
||||
epicsInt16 scramble; // 658 0=scrambled,1=unscrambled
|
||||
epicsInt16 ContinuousCleansFlag; // 660 T/F Continuous Cleans Timing Option
|
||||
epicsInt16 ExternalTriggerFlag; // 662 T/F External Trigger Timing Option
|
||||
epicsInt32 lnoscan; // 664 Number of scans (Early WinX)
|
||||
epicsInt32 lavgexp; // 668 Number of Accumulations
|
||||
epicsFloat32 ReadoutTime; // 672 Experiment readout time
|
||||
epicsInt16 TriggeredModeFlag; // 676 T/F Triggered Timing Option
|
||||
char Spare_2[10]; // 678
|
||||
char sw_version[FILEVERMAX]; // 688 Version of SW creating this file
|
||||
epicsInt16 type; // 704 0=1000,1=new120,2=old120,3=130,
|
||||
// st121=4,st138=5,dc131(PentaMax)=6,
|
||||
// st133(MicroMax)=7,st135(GPIB)=8,
|
||||
// VICCD=9, ST116(GPIB)=10,
|
||||
// OMA3(GPIB)=11,OMA4=12
|
||||
epicsInt16 flatFieldApplied; // 706 1 if flat field was applied.
|
||||
char Spare_3[16]; // 708
|
||||
epicsInt16 kin_trig_mode; // 724 Kinetics Trigger Mode
|
||||
char dlabel[LABELMAX]; // 726 Data label.
|
||||
char Spare_4[436]; // 742
|
||||
char PulseFileName[HDRNAMEMAX]; // 1178 Name of Pulser File with
|
||||
// Pulse Widths/Delays (for Z-Slice)
|
||||
char AbsorbFileName[HDRNAMEMAX]; // 1298 Name of Absorbance File (if File Mode)
|
||||
epicsUInt32 NumExpRepeats; // 1418 Number of Times experiment repeated
|
||||
epicsUInt32 NumExpAccums; // 1422 Number of Time experiment accumulated
|
||||
epicsInt16 YT_Flag; // 1426 Set to 1 if this file contains YT data
|
||||
epicsFloat32 clkspd_us; // 1428 Vert Clock Speed in micro-sec
|
||||
epicsInt16 HWaccumFlag; // 1432 set to 1 if accum done by Hardware.
|
||||
epicsInt16 StoreSync; // 1434 set to 1 if store sync used.
|
||||
epicsInt16 BlemishApplied; // 1436 set to 1 if blemish removal applied.
|
||||
epicsInt16 CosmicApplied; // 1438 set to 1 if cosmic ray removal applied
|
||||
epicsInt16 CosmicType; // 1440 if cosmic ray applied, this is type.
|
||||
epicsFloat32 CosmicThreshold; // 1442 Threshold of cosmic ray removal.
|
||||
epicsInt32 NumFrames; // 1446 number of frames in file.
|
||||
epicsFloat32 MaxIntensity; // 1450 max intensity of data (future)
|
||||
epicsFloat32 MinIntensity; // 1454 min intensity of data (future)
|
||||
char ylabel[LABELMAX]; // 1458 y axis label.
|
||||
epicsUInt16 ShutterType; // 1474 shutter type.
|
||||
epicsFloat32 shutterComp; // 1476 shutter compensation time.
|
||||
epicsUInt16 readoutMode; // 1480 readout mode, full,kinetics, etc
|
||||
epicsUInt16 WindowSize; // 1482 window size for kinetics only.
|
||||
epicsUInt16 clkspd; // 1484 clock speed for kinetics & frame transfer.
|
||||
epicsUInt16 interface_type; // 1486 computer interface
|
||||
// (isa-taxi, pci, eisa, etc.)
|
||||
epicsInt16 NumROIsInExperiment; // 1488 May be more than the 10 allowed in
|
||||
// this header (if 0, assume 1)
|
||||
char Spare_5[16]; // 1490
|
||||
epicsUInt16 controllerNum; // 1506 if multiple controller system will
|
||||
// have controller number data came from.
|
||||
// this is a future item.
|
||||
epicsUInt16 SWmade; // 1508 Which software package created this file
|
||||
epicsInt16 NumROI; // 1510 number of ROIs used. if 0 assume 1.
|
||||
ROIinfo ROIinfoblk[ROIMAX]; // 1512 ROI information
|
||||
char FlatField[HDRNAMEMAX]; // 1632 Flat field file name.
|
||||
char background[HDRNAMEMAX]; // 1752 background sub. file name.
|
||||
char blemish[HDRNAMEMAX]; // 1872 blemish file name.
|
||||
epicsFloat32 file_header_ver; // 1992 version of this file header
|
||||
char YT_Info[1000]; // 1996-2996 Reserved for YT information
|
||||
epicsInt32 WinView_id; // 2996 == 0x01234567L if in use by WinView
|
||||
struct { // X Y
|
||||
epicsFloat64 offset; // 3000 3489 offset for absolut data scaling
|
||||
epicsFloat64 factor; // 3008 3497 factor for absolut data scaling
|
||||
char current_unit; // 3016 3505 selected scaling unit
|
||||
char CalibReserved1; // 3017 3506 reserved
|
||||
char display_string[40]; // 3018 3507 string used for drawing axes...
|
||||
char CalibReserved2[40]; // 3058 3547 reserved
|
||||
char calib_valid; // 3098 3587 flag if calibration is valid
|
||||
char input_unit; // 3099 3588 current input units for "calib_value"
|
||||
char polynounit; // 3100 3589 linear UNIT and used in the "polynocoeff"
|
||||
char polynoorder; // 3101 3590 ORDER of calibration POLYNOM
|
||||
char calib_count; // 3102 3591 valid calibration data pairs
|
||||
epicsFloat64 pixel_position[10]; // 3103 3592 pixel pos. of calibration data
|
||||
epicsFloat64 calib_value[10]; // 3183 3672 calibration VALUE at above pos
|
||||
epicsFloat64 polynocoeff[6]; // 3263 3752 polynom COEFFICIENTS
|
||||
epicsFloat64 laser_position; // 3311 3800 laser wavenumber for relativ WN
|
||||
char CalibReserved3; // 3319 3808 reserved
|
||||
epicsUInt8 leftover_flag; // 3320 3809 not used.
|
||||
char user_label[40]; // 3321 3810 Calibration label
|
||||
char expansion[128]; // 3361 3850 Expansion area
|
||||
} xcalibration, // 3000 -> 3488 X axis calibration
|
||||
ycalibration; // 3489 -> 3977 Y axis calibration
|
||||
char Istring[40]; // 3978 special intensity scaling string
|
||||
char Spare_6[25]; // 4018
|
||||
epicsUInt8 SpecType; // 4043 spectrometer type (acton, spex, etc.)
|
||||
epicsUInt8 SpecModel; // 4044 spectrometer model (type dependent)
|
||||
epicsUInt8 PulseBurstUsed; // 4045 pulser burst mode on/off
|
||||
epicsUInt32 PulseBurstCount; // 4046 pulser triggers per burst
|
||||
epicsFloat64 PulseBurstPeriod; // 4050 pulser burst period (in usec)
|
||||
epicsUInt8 PulseBracketUsed; // 4058 pulser bracket pulsing on/off
|
||||
epicsUInt8 PulseBracketType; // 4059 pulser bracket pulsing type
|
||||
epicsFloat64 PulseTimeConstFast; // 4060 pulser slow exponential time constant (in usec)
|
||||
epicsFloat64 PulseAmplitudeFast; // 4068 pulser fast exponential amplitude constant
|
||||
epicsFloat64 PulseTimeConstSlow; // 4076 pulser slow exponential time constant (in usec)
|
||||
epicsFloat64 PulseAmplitudeSlow; // 4084 pulser slow exponential amplitude constant
|
||||
epicsInt16 AnalogGain; // 4092 analog gain
|
||||
epicsInt16 AvGainUsed; // 4094 avalanche gain was used
|
||||
epicsInt16 AvGain; // 4096 avalanche gain value
|
||||
epicsInt16 lastvalue; // 4098 Always the LAST value in the header
|
||||
} CSMAHead; // 4100 Bytes Total Header Size
|
||||
|
||||
|
||||
#pragma pack()
|
||||
|
||||
#endif // CHEADER_H
|
||||
#endif // CHEADER_H
|
||||
|
||||
Reference in New Issue
Block a user