Initial revision

1993-08-25 11:45:50 +00:00
parent 312e705aca
commit dbe30c39d6
1 changed files with 107 additions and 0 deletions
--- a/src/drv/drvStc.h
+++ b/src/drv/drvStc.h
@@ -0,0 +1,107 @@
+/* drvStc.h */
+/* share/src/drv $Id$ */
+/*
+ * The following are specific driver routines for the AMD STC
+ *
+ * NOTE: if multiple threads use these routines at once you must provide locking
+ * so command/data sequences are gauranteed. See mz8310_driver.c for examples.
+ *
+ *
+ *      Author: Jeff Hill
+ *      Date:   Feb 89
+ *
+ *      Experimental Physics and Industrial Control System (EPICS)
+ *
+ *      Copyright 1991, the Regents of the University of California,
+ *      and the University of Chicago Board of Governors.
+ *
+ *      This software was produced under  U.S. Government contracts:
+ *      (W-7405-ENG-36) at the Los Alamos National Laboratory,
+ *      and (W-31-109-ENG-38) at Argonne National Laboratory.
+ *
+ *      Initial development by:
+ *              The Controls and Automation Group (AT-8)
+ *              Ground Test Accelerator
+ *              Accelerator Technology Division
+ *              Los Alamos National Laboratory
+ *
+ *      Co-developed with
+ *              The Controls and Computing Group
+ *              Accelerator Systems Division
+ *              Advanced Photon Source
+ *              Argonne National Laboratory
+ *
+ * Modification Log:
+ * -----------------
+ *
+ * joh  022089  Init Release
+ * joh  082493  ANSI C and EPICS return codes
+ */
+
+/*
+ * AMD STC constants
+ */
+#define CHANONCHIP              5U
+#define CHIPCHAN                (channel%CHANONCHIP)
+#define CHIPNUM                 (channel/CHANONCHIP)
+
+#define STC_RESET               *pcmd = 0xffU
+#define STC_BUS16               *pcmd = 0xefU
+#define STC_SET_MASTER_MODE(D)  {*pcmd = 0x17U; *pdata=(D);}
+#define STC_MASTER_MODE         (*pcmd = 0x17U, *pdata)
+
+#define STC_CTR_INIT(MODE,LOAD,HOLD)\
+{*pcmd = CHIPCHAN+1; *pdata = (MODE); *pdata = (LOAD); *pdata= (HOLD);}
+
+#define STC_CTR_READ(MODE,LOAD,HOLD)\
+{*pcmd = CHIPCHAN+1; (MODE) = *pdata; (LOAD) = *pdata; (HOLD) = *pdata;}
+
+#define STC_SET_TC(D)           *pcmd = 0xe0U | ((D)?8:0)|(CHIPCHAN+1U)
+
+#define STC_LOAD                *pcmd = 0x40U | 1<<(CHIPCHAN)
+#define STC_STEP                *pcmd = 0xf0U | (CHIPCHAN+1U)
+#define STC_ARM                 *pcmd = 0x20U | 1<<CHIPCHAN
+#define STC_DISARM              *pcmd = 0xc0U | 1<<CHIPCHAN
+
+
+
+
+/*
+ * return type of the stc routines
+ */
+typedef long    stcStat;
+#define STC_SUCCESS	0
+
+
+stcStat stc_io_report(
+volatile unsigned char  *pcmd,
+volatile unsigned short *pdata
+);
+
+
+stcStat stc_init(
+volatile unsigned char  *pcmd,
+volatile unsigned short	*pdata,
+unsigned 		master_mode
+);
+
+stcStat stc_one_shot_read(
+unsigned 		*preset,
+unsigned short 		*edge0_count,
+unsigned short 		*edge1_count,
+volatile unsigned char  *pcmd,
+volatile unsigned short *pdata,
+unsigned 		channel,
+unsigned 		*int_source 
+);
+
+stcStat stc_one_shot(
+unsigned 		preset,
+unsigned 		edge0_count,
+unsigned 		edge1_count,
+volatile unsigned char  *pcmd,
+volatile unsigned short *pdata,
+unsigned 		channel,
+unsigned 		int_source 
+);
+